[POWERPC] 8xx: mpc885ads cleanup
It now uses the new CPM binding and the generic pin/clock functions, and has assorted fixes and cleanup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
parent
96fca1dea8
commit
20906ecea2
|
@ -2,6 +2,7 @@
|
|||
* MPC885 ADS Device Tree Source
|
||||
*
|
||||
* Copyright 2006 MontaVista Software, Inc.
|
||||
* Copyright 2007 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
|
@ -12,7 +13,7 @@
|
|||
|
||||
/ {
|
||||
model = "MPC885ADS";
|
||||
compatible = "mpc8xx";
|
||||
compatible = "fsl,mpc885ads";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
|
@ -23,156 +24,188 @@
|
|||
PowerPC,885@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <20>; // 32 bytes
|
||||
i-cache-line-size = <20>; // 32 bytes
|
||||
d-cache-size = <2000>; // L1, 8K
|
||||
i-cache-size = <2000>; // L1, 8K
|
||||
d-cache-line-size = <d#16>;
|
||||
i-cache-line-size = <d#16>;
|
||||
d-cache-size = <d#8192>;
|
||||
i-cache-size = <d#8192>;
|
||||
timebase-frequency = <0>;
|
||||
bus-frequency = <0>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <f 2>; // decrementer interrupt
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
interrupt-parent = <&PIC>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <00000000 800000>;
|
||||
reg = <0 0>;
|
||||
};
|
||||
|
||||
soc885@ff000000 {
|
||||
localbus@ff000100 {
|
||||
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
reg = <ff000100 40>;
|
||||
|
||||
ranges = <
|
||||
0 0 fe000000 00800000
|
||||
1 0 ff080000 00008000
|
||||
5 0 ff0a0000 00008000
|
||||
>;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "jedec-flash";
|
||||
reg = <0 0 800000>;
|
||||
bank-width = <4>;
|
||||
device-width = <1>;
|
||||
};
|
||||
|
||||
board-control@1,0 {
|
||||
reg = <1 0 20 5 300 4>;
|
||||
compatible = "fsl,mpc885ads-bcsr";
|
||||
};
|
||||
};
|
||||
|
||||
soc@ff000000 {
|
||||
compatible = "fsl,mpc885", "fsl,pq1-soc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
ranges = <0 ff000000 00100000>;
|
||||
reg = <ff000000 00000200>;
|
||||
ranges = <0 ff000000 00004000>;
|
||||
bus-frequency = <0>;
|
||||
mdio@e80 {
|
||||
device_type = "mdio";
|
||||
compatible = "fs_enet";
|
||||
reg = <e80 8>;
|
||||
|
||||
// Temporary -- will go away once kernel uses ranges for get_immrbase().
|
||||
reg = <ff000000 4000>;
|
||||
|
||||
mdio@e00 {
|
||||
compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
|
||||
reg = <e00 188>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
Phy0: ethernet-phy@0 {
|
||||
|
||||
PHY0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
Phy1: ethernet-phy@1 {
|
||||
|
||||
PHY1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
Phy2: ethernet-phy@2 {
|
||||
|
||||
PHY2: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
};
|
||||
|
||||
fec@e00 {
|
||||
ethernet@e00 {
|
||||
device_type = "network";
|
||||
compatible = "fs_enet";
|
||||
model = "FEC";
|
||||
device-id = <1>;
|
||||
compatible = "fsl,mpc885-fec-enet",
|
||||
"fsl,pq1-fec-enet";
|
||||
reg = <e00 188>;
|
||||
mac-address = [ 00 00 0C 00 01 FD ];
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <3 1>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
phy-handle = <&Phy1>;
|
||||
interrupt-parent = <&PIC>;
|
||||
phy-handle = <&PHY0>;
|
||||
linux,network-index = <0>;
|
||||
};
|
||||
|
||||
fec@1e00 {
|
||||
ethernet@1e00 {
|
||||
device_type = "network";
|
||||
compatible = "fs_enet";
|
||||
model = "FEC";
|
||||
device-id = <2>;
|
||||
compatible = "fsl,mpc885-fec-enet",
|
||||
"fsl,pq1-fec-enet";
|
||||
reg = <1e00 188>;
|
||||
mac-address = [ 00 00 0C 00 02 FD ];
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <7 1>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
phy-handle = <&Phy2>;
|
||||
interrupt-parent = <&PIC>;
|
||||
phy-handle = <&PHY1>;
|
||||
linux,network-index = <1>;
|
||||
};
|
||||
|
||||
Mpc8xx_pic: pic@ff000000 {
|
||||
PIC: interrupt-controller@0 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0 24>;
|
||||
device_type = "mpc8xx-pic";
|
||||
compatible = "CPM";
|
||||
compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
|
||||
};
|
||||
|
||||
pcmcia@0080 {
|
||||
pcmcia@80 {
|
||||
#address-cells = <3>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
compatible = "fsl,pq-pcmcia";
|
||||
device_type = "pcmcia";
|
||||
reg = <80 80>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
interrupt-parent = <&PIC>;
|
||||
interrupts = <d 1>;
|
||||
};
|
||||
|
||||
cpm@ff000000 {
|
||||
cpm@9c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "cpm";
|
||||
model = "CPM";
|
||||
ranges = <0 0 4000>;
|
||||
reg = <860 f0>;
|
||||
compatible = "fsl,mpc885-cpm", "fsl,cpm1";
|
||||
command-proc = <9c0>;
|
||||
brg-frequency = <0>;
|
||||
interrupts = <0 2>; // cpm error interrupt
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
interrupts = <0>; // cpm error interrupt
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
reg = <9c0 40 2000 1c00>;
|
||||
ranges;
|
||||
|
||||
Cpm_pic: pic@930 {
|
||||
brg@9f0 {
|
||||
compatible = "fsl,mpc885-brg",
|
||||
"fsl,cpm1-brg",
|
||||
"fsl,cpm-brg";
|
||||
reg = <9f0 10>;
|
||||
};
|
||||
|
||||
CPM_PIC: interrupt-controller@930 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupts = <5 2 0 2>;
|
||||
interrupt-parent = <&Mpc8xx_pic>;
|
||||
interrupt-parent = <&PIC>;
|
||||
reg = <930 20>;
|
||||
device_type = "cpm-pic";
|
||||
compatible = "CPM";
|
||||
compatible = "fsl,mpc885-cpm-pic",
|
||||
"fsl,cpm1-pic";
|
||||
};
|
||||
|
||||
smc@a80 {
|
||||
serial@a80 {
|
||||
device_type = "serial";
|
||||
compatible = "cpm_uart";
|
||||
model = "SMC";
|
||||
device-id = <1>;
|
||||
compatible = "fsl,mpc885-smc-uart",
|
||||
"fsl,cpm1-smc-uart";
|
||||
reg = <a80 10 3e80 40>;
|
||||
clock-setup = <00ffffff 0>;
|
||||
rx-clock = <1>;
|
||||
tx-clock = <1>;
|
||||
current-speed = <0>;
|
||||
interrupts = <4 3>;
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
interrupts = <4>;
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
fsl,cpm-brg = <1>;
|
||||
fsl,cpm-command = <0090>;
|
||||
};
|
||||
|
||||
smc@a90 {
|
||||
serial@a90 {
|
||||
device_type = "serial";
|
||||
compatible = "cpm_uart";
|
||||
model = "SMC";
|
||||
device-id = <2>;
|
||||
reg = <a90 20 3f80 40>;
|
||||
clock-setup = <ff00ffff 90000>;
|
||||
rx-clock = <2>;
|
||||
tx-clock = <2>;
|
||||
current-speed = <0>;
|
||||
interrupts = <3 3>;
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
compatible = "fsl,mpc885-smc-uart",
|
||||
"fsl,cpm1-smc-uart";
|
||||
reg = <a90 10 3f80 40>;
|
||||
interrupts = <3>;
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
fsl,cpm-brg = <2>;
|
||||
fsl,cpm-command = <00d0>;
|
||||
};
|
||||
|
||||
scc@a40 {
|
||||
ethernet@a40 {
|
||||
device_type = "network";
|
||||
compatible = "fs_enet";
|
||||
model = "SCC";
|
||||
device-id = <3>;
|
||||
reg = <a40 18 3e00 80>;
|
||||
mac-address = [ 00 00 0C 00 03 FD ];
|
||||
interrupts = <1c 3>;
|
||||
interrupt-parent = <&Cpm_pic>;
|
||||
phy-handle = <&Phy2>;
|
||||
compatible = "fsl,mpc885-scc-enet",
|
||||
"fsl,cpm1-scc-enet";
|
||||
reg = <a40 18 3e00 100>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <1c>;
|
||||
interrupt-parent = <&CPM_PIC>;
|
||||
phy-handle = <&PHY2>;
|
||||
fsl,cpm-command = <0080>;
|
||||
linux,network-index = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "/soc/cpm/serial@a80";
|
||||
};
|
||||
};
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.23-rc4
|
||||
# Tue Aug 28 21:24:45 2007
|
||||
# Linux kernel version: 2.6.23-rc3
|
||||
# Mon Aug 27 15:23:16 2007
|
||||
#
|
||||
# CONFIG_PPC64 is not set
|
||||
|
||||
|
@ -38,6 +38,7 @@ CONFIG_OF=y
|
|||
# CONFIG_PPC_UDBG_16550 is not set
|
||||
# CONFIG_GENERIC_TBSYNC is not set
|
||||
CONFIG_AUDIT_ARCH=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
# CONFIG_DEFAULT_UIMAGE is not set
|
||||
# CONFIG_PPC_DCR_NATIVE is not set
|
||||
# CONFIG_PPC_DCR_MMIO is not set
|
||||
|
@ -69,24 +70,25 @@ CONFIG_SYSCTL=y
|
|||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_SYSCTL_SYSCALL is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
# CONFIG_BUG is not set
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BUG=y
|
||||
# CONFIG_ELF_CORE is not set
|
||||
# CONFIG_BASE_FULL is not set
|
||||
CONFIG_FUTEX=y
|
||||
# CONFIG_FUTEX is not set
|
||||
CONFIG_ANON_INODES=y
|
||||
# CONFIG_EPOLL is not set
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SIGNALFD=y
|
||||
CONFIG_TIMERFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
CONFIG_SHMEM=y
|
||||
# CONFIG_VM_EVENT_COUNTERS is not set
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_SLUB is not set
|
||||
CONFIG_SLUB_DEBUG=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_RT_MUTEXES=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=1
|
||||
# CONFIG_MODULES is not set
|
||||
|
@ -100,14 +102,14 @@ CONFIG_BLOCK=y
|
|||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_DEFAULT_AS is not set
|
||||
CONFIG_DEFAULT_DEADLINE=y
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
CONFIG_DEFAULT_IOSCHED="deadline"
|
||||
|
||||
#
|
||||
# Platform support
|
||||
|
@ -120,6 +122,7 @@ CONFIG_CPM1=y
|
|||
# CONFIG_MPC8XXFADS is not set
|
||||
# CONFIG_MPC86XADS is not set
|
||||
CONFIG_MPC885ADS=y
|
||||
# CONFIG_PPC_EP88XC is not set
|
||||
|
||||
#
|
||||
# Freescale Ethernet driver platform-specific options
|
||||
|
@ -137,6 +140,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
|
|||
#
|
||||
CONFIG_8xx_COPYBACK=y
|
||||
# CONFIG_8xx_CPU6 is not set
|
||||
CONFIG_8xx_CPU15=y
|
||||
CONFIG_NO_UCODE_PATCH=y
|
||||
# CONFIG_USB_SOF_UCODE_PATCH is not set
|
||||
# CONFIG_I2C_SPI_UCODE_PATCH is not set
|
||||
|
@ -153,23 +157,23 @@ CONFIG_NO_UCODE_PATCH=y
|
|||
# CONFIG_GENERIC_IOMAP is not set
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
# CONFIG_CPM2 is not set
|
||||
# CONFIG_FSL_ULI1575 is not set
|
||||
CONFIG_PPC_CPM_NEW_BINDING=y
|
||||
|
||||
#
|
||||
# Kernel options
|
||||
#
|
||||
# CONFIG_HIGHMEM is not set
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_100=y
|
||||
# CONFIG_HZ_250 is not set
|
||||
# CONFIG_HZ_300 is not set
|
||||
CONFIG_HZ_1000=y
|
||||
CONFIG_HZ=1000
|
||||
# CONFIG_HZ_1000 is not set
|
||||
CONFIG_HZ=100
|
||||
CONFIG_PREEMPT_NONE=y
|
||||
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
CONFIG_MATH_EMULATION=y
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
|
@ -185,11 +189,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
|
|||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
# CONFIG_PROC_DEVICETREE is not set
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_SECCOMP is not set
|
||||
# CONFIG_WANT_DEVICE_TREE is not set
|
||||
CONFIG_WANT_DEVICE_TREE=y
|
||||
CONFIG_DEVICE_TREE="mpc885ads.dts"
|
||||
CONFIG_ISA_DMA_API=y
|
||||
|
||||
#
|
||||
|
@ -206,6 +211,7 @@ CONFIG_FSL_SOC=y
|
|||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Advanced setup
|
||||
|
@ -234,10 +240,6 @@ CONFIG_NET=y
|
|||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM=y
|
||||
# CONFIG_XFRM_USER is not set
|
||||
# CONFIG_XFRM_SUB_POLICY is not set
|
||||
# CONFIG_XFRM_MIGRATE is not set
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
|
@ -257,9 +259,9 @@ CONFIG_SYN_COOKIES=y
|
|||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
|
@ -319,22 +321,91 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
# CONFIG_DEBUG_DEVRES is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
# CONFIG_CONNECTOR is not set
|
||||
# CONFIG_MTD is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
# CONFIG_MTD_PARTITIONS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_NOSWAP=y
|
||||
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
# CONFIG_MTD_CFI_I1 is not set
|
||||
# CONFIG_MTD_CFI_I2 is not set
|
||||
CONFIG_MTD_CFI_I4=y
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_OTP is not set
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
# CONFIG_MTD_NAND is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# UBI - Unsorted block images
|
||||
#
|
||||
# CONFIG_MTD_UBI is not set
|
||||
CONFIG_OF_DEVICE=y
|
||||
# CONFIG_PARPORT is not set
|
||||
CONFIG_BLK_DEV=y
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
CONFIG_MISC_DEVICES=y
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
# CONFIG_BLK_DEV is not set
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
|
@ -368,16 +439,15 @@ CONFIG_DAVICOM_PHY=y
|
|||
# CONFIG_SMSC_PHY is not set
|
||||
# CONFIG_BROADCOM_PHY is not set
|
||||
# CONFIG_ICPLUS_PHY is not set
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIXED_MII_10_FDX=y
|
||||
# CONFIG_FIXED_MII_100_FDX is not set
|
||||
# CONFIG_FIXED_PHY is not set
|
||||
# CONFIG_MDIO_BITBANG is not set
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_FS_ENET=y
|
||||
CONFIG_FS_ENET_HAS_SCC=y
|
||||
# CONFIG_FS_ENET_HAS_SCC is not set
|
||||
CONFIG_FS_ENET_HAS_FEC=y
|
||||
CONFIG_NETDEV_1000=y
|
||||
CONFIG_NETDEV_10000=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
|
||||
#
|
||||
# Wireless LAN
|
||||
|
@ -397,55 +467,12 @@ CONFIG_NETDEV_10000=y
|
|||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||
# CONFIG_INPUT_POLLDEV is not set
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
CONFIG_KEYBOARD_ATKBD=y
|
||||
# CONFIG_KEYBOARD_SUNKBD is not set
|
||||
# CONFIG_KEYBOARD_LKKBD is not set
|
||||
# CONFIG_KEYBOARD_XTKBD is not set
|
||||
# CONFIG_KEYBOARD_NEWTON is not set
|
||||
# CONFIG_KEYBOARD_STOWAWAY is not set
|
||||
CONFIG_INPUT_MOUSE=y
|
||||
CONFIG_MOUSE_PS2=y
|
||||
CONFIG_MOUSE_PS2_ALPS=y
|
||||
CONFIG_MOUSE_PS2_LOGIPS2PP=y
|
||||
CONFIG_MOUSE_PS2_SYNAPTICS=y
|
||||
CONFIG_MOUSE_PS2_LIFEBOOK=y
|
||||
CONFIG_MOUSE_PS2_TRACKPOINT=y
|
||||
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
||||
# CONFIG_MOUSE_SERIAL is not set
|
||||
# CONFIG_MOUSE_VSXXXAA is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TABLET is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
CONFIG_SERIO=y
|
||||
CONFIG_SERIO_I8042=y
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
|
@ -493,20 +520,7 @@ CONFIG_GEN_RTC=y
|
|||
# CONFIG_SPI_MASTER is not set
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ABITUGURU is not set
|
||||
# CONFIG_SENSORS_ABITUGURU3 is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_PC87427 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VT1211 is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
# CONFIG_HWMON is not set
|
||||
|
||||
#
|
||||
# Multifunction device drivers
|
||||
|
@ -530,7 +544,7 @@ CONFIG_DAB=y
|
|||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
CONFIG_VIDEO_OUTPUT_CONTROL=y
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_FB_IBM_GXT4500 is not set
|
||||
|
||||
|
@ -538,22 +552,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
|
|||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=y
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
# CONFIG_MMC is not set
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
# CONFIG_EDAC is not set
|
||||
|
@ -580,19 +579,9 @@ CONFIG_USB_SUPPORT=y
|
|||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_EXT2_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_EXT4DEV_FS is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
|
@ -601,10 +590,9 @@ CONFIG_FS_MBCACHE=y
|
|||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
# CONFIG_INOTIFY is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
@ -645,6 +633,7 @@ CONFIG_RAMFS=y
|
|||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
CONFIG_CRAMFS=y
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
|
@ -711,15 +700,13 @@ CONFIG_MSDOS_PARTITION=y
|
|||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_BITREVERSE=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_CRC32 is not set
|
||||
# CONFIG_CRC7 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_PLIST=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAS_DMA=y
|
||||
|
@ -734,11 +721,33 @@ CONFIG_HAS_DMA=y
|
|||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_SHIRQ is not set
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
CONFIG_SCHED_DEBUG=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_TIMER_STATS is not set
|
||||
# CONFIG_SLUB_DEBUG_ON is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_MUTEXES is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
# CONFIG_DEBUG_LIST is not set
|
||||
CONFIG_FORCED_INLINING=y
|
||||
# CONFIG_FAULT_INJECTION is not set
|
||||
# CONFIG_DEBUG_STACKOVERFLOW is not set
|
||||
# CONFIG_DEBUG_STACK_USAGE is not set
|
||||
# CONFIG_DEBUG_PAGEALLOC is not set
|
||||
# CONFIG_DEBUGGER is not set
|
||||
# CONFIG_BDI_SWITCH is not set
|
||||
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||
|
||||
#
|
||||
|
|
|
@ -26,6 +26,7 @@ config MPC86XADS
|
|||
config MPC885ADS
|
||||
bool "MPC885ADS"
|
||||
select CPM1
|
||||
select PPC_CPM_NEW_BINDING
|
||||
help
|
||||
Freescale Semiconductor MPC885 Application Development System (ADS).
|
||||
Also known as DUET.
|
||||
|
|
|
@ -17,25 +17,10 @@
|
|||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
|
||||
/* U-Boot maps BCSR to 0xff080000 */
|
||||
#define BCSR_ADDR ((uint)0xff080000)
|
||||
#define BCSR_SIZE ((uint)32)
|
||||
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
|
||||
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
|
||||
#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
|
||||
#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
|
||||
#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
|
||||
|
||||
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
|
||||
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
|
||||
|
||||
#define MPC8xx_CPM_OFFSET (0x9c0)
|
||||
#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET)
|
||||
#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver
|
||||
|
||||
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
|
||||
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
|
||||
|
||||
/* Bits of interest in the BCSRs.
|
||||
*/
|
||||
#define BCSR1_ETHEN ((uint)0x20000000)
|
||||
|
@ -64,28 +49,5 @@
|
|||
#define BCSR5_MII1_EN 0x02
|
||||
#define BCSR5_MII1_RST 0x01
|
||||
|
||||
/* Interrupt level assignments */
|
||||
#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
|
||||
#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
|
||||
#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
|
||||
#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
|
||||
|
||||
/* We don't use the 8259 */
|
||||
#define NR_8259_INTS 0
|
||||
|
||||
/* CPM Ethernet through SCC3 */
|
||||
#define PA_ENET_RXD ((ushort)0x0040)
|
||||
#define PA_ENET_TXD ((ushort)0x0080)
|
||||
#define PE_ENET_TCLK ((uint)0x00004000)
|
||||
#define PE_ENET_RCLK ((uint)0x00008000)
|
||||
#define PE_ENET_TENA ((uint)0x00000010)
|
||||
#define PC_ENET_CLSN ((ushort)0x0400)
|
||||
#define PC_ENET_RENA ((ushort)0x0800)
|
||||
|
||||
/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
|
||||
* SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
|
||||
#define SICR_ENET_MASK ((uint)0x00ff0000)
|
||||
#define SICR_ENET_CLKRT ((uint)0x002c0000)
|
||||
|
||||
#endif /* __ASM_MPC885ADS_H__ */
|
||||
#endif /* __KERNEL__ */
|
||||
|
|
|
@ -1,11 +1,13 @@
|
|||
/*arch/powerpc/platforms/8xx/mpc885ads_setup.c
|
||||
*
|
||||
/*
|
||||
* Platform setup for the Freescale mpc885ads board
|
||||
*
|
||||
* Vitaly Bordug <vbordug@ru.mvista.com>
|
||||
*
|
||||
* Copyright 2005 MontaVista Software Inc.
|
||||
*
|
||||
* Heavily modified by Scott Wood <scottwood@freescale.com>
|
||||
* Copyright 2007 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
|
@ -18,12 +20,12 @@
|
|||
#include <linux/ioport.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/root_dev.h>
|
||||
|
||||
#include <linux/fs_enet_pd.h>
|
||||
#include <linux/fs_uart_pd.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
#include <linux/mii.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/delay.h>
|
||||
#include <asm/io.h>
|
||||
|
@ -36,34 +38,24 @@
|
|||
#include <asm/8xx_immap.h>
|
||||
#include <asm/commproc.h>
|
||||
#include <asm/fs_pd.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
|
||||
#include <sysdev/commproc.h>
|
||||
|
||||
static void init_smc1_uart_ioports(struct fs_uart_platform_info *fpi);
|
||||
static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi);
|
||||
static void init_scc3_ioports(struct fs_platform_info *ptr);
|
||||
static u32 __iomem *bcsr, *bcsr5;
|
||||
|
||||
#ifdef CONFIG_PCMCIA_M8XX
|
||||
static void pcmcia_hw_setup(int slot, int enable)
|
||||
{
|
||||
unsigned *bcsr_io;
|
||||
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
if (enable)
|
||||
clrbits32(bcsr_io, BCSR1_PCCEN);
|
||||
clrbits32(&bcsr[1], BCSR1_PCCEN);
|
||||
else
|
||||
setbits32(bcsr_io, BCSR1_PCCEN);
|
||||
|
||||
iounmap(bcsr_io);
|
||||
setbits32(&bcsr[1], BCSR1_PCCEN);
|
||||
}
|
||||
|
||||
static int pcmcia_set_voltage(int slot, int vcc, int vpp)
|
||||
{
|
||||
u32 reg = 0;
|
||||
unsigned *bcsr_io;
|
||||
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
|
||||
switch (vcc) {
|
||||
case 0:
|
||||
|
@ -98,334 +90,196 @@ static int pcmcia_set_voltage(int slot, int vcc, int vpp)
|
|||
}
|
||||
|
||||
/* first, turn off all power */
|
||||
clrbits32(bcsr_io, 0x00610000);
|
||||
clrbits32(&bcsr[1], 0x00610000);
|
||||
|
||||
/* enable new powersettings */
|
||||
setbits32(bcsr_io, reg);
|
||||
setbits32(&bcsr[1], reg);
|
||||
|
||||
iounmap(bcsr_io);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
void __init mpc885ads_board_setup(void)
|
||||
{
|
||||
cpm8xx_t *cp;
|
||||
unsigned int *bcsr_io;
|
||||
u8 tmpval8;
|
||||
struct cpm_pin {
|
||||
int port, pin, flags;
|
||||
};
|
||||
|
||||
#ifdef CONFIG_FS_ENET
|
||||
iop8xx_t *io_port;
|
||||
static struct cpm_pin mpc885ads_pins[] = {
|
||||
/* SMC1 */
|
||||
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
|
||||
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
|
||||
|
||||
/* SMC2 */
|
||||
#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
||||
{CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
|
||||
{CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
|
||||
#endif
|
||||
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
cp = (cpm8xx_t *) immr_map(im_cpm);
|
||||
/* SCC3 */
|
||||
{CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
|
||||
{CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
|
||||
{CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
|
||||
{CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
|
||||
{CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
|
||||
{CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
|
||||
{CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
/* MII1 */
|
||||
{CPM_PORTA, 0, CPM_PIN_INPUT},
|
||||
{CPM_PORTA, 1, CPM_PIN_INPUT},
|
||||
{CPM_PORTA, 2, CPM_PIN_INPUT},
|
||||
{CPM_PORTA, 3, CPM_PIN_INPUT},
|
||||
{CPM_PORTA, 4, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTA, 10, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTA, 11, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTB, 19, CPM_PIN_INPUT},
|
||||
{CPM_PORTB, 31, CPM_PIN_INPUT},
|
||||
{CPM_PORTC, 12, CPM_PIN_INPUT},
|
||||
{CPM_PORTC, 13, CPM_PIN_INPUT},
|
||||
{CPM_PORTE, 30, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 31, CPM_PIN_OUTPUT},
|
||||
|
||||
/* MII2 */
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
||||
{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||
{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||
{CPM_PORTE, 16, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||
{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||
{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||
{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
||||
{CPM_PORTE, 21, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 22, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 23, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 24, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 25, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 26, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 27, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
|
||||
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
|
||||
#endif
|
||||
};
|
||||
|
||||
static void __init init_ioports(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
|
||||
struct cpm_pin *pin = &mpc885ads_pins[i];
|
||||
cpm1_set_pin(pin->port, pin->pin, pin->flags);
|
||||
}
|
||||
|
||||
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
|
||||
cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
|
||||
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
|
||||
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
|
||||
|
||||
/* Set FEC1 and FEC2 to MII mode */
|
||||
clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
|
||||
}
|
||||
|
||||
static void __init mpc885ads_setup_arch(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
cpm_reset();
|
||||
init_ioports();
|
||||
|
||||
np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
|
||||
if (!np) {
|
||||
printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
|
||||
return;
|
||||
}
|
||||
|
||||
bcsr = of_iomap(np, 0);
|
||||
bcsr5 = of_iomap(np, 1);
|
||||
of_node_put(np);
|
||||
|
||||
if (!bcsr || !bcsr5) {
|
||||
printk(KERN_CRIT "Could not remap BCSR\n");
|
||||
return;
|
||||
}
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC1
|
||||
clrbits32(bcsr_io, BCSR1_RS232EN_1);
|
||||
clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */
|
||||
tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX);
|
||||
out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
|
||||
clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN); /* brg1 */
|
||||
|
||||
clrbits32(&bcsr[1], BCSR1_RS232EN_1);
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
||||
setbits32(&bcsr[1], BCSR1_RS232EN_2);
|
||||
#else
|
||||
setbits32(bcsr_io, BCSR1_RS232EN_1);
|
||||
out_be16(&cp->cp_smc[0].smc_smcmr, 0);
|
||||
out_8(&cp->cp_smc[0].smc_smce, 0);
|
||||
clrbits32(&bcsr[1], BCSR1_RS232EN_2);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC2
|
||||
clrbits32(bcsr_io, BCSR1_RS232EN_2);
|
||||
clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
|
||||
setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */
|
||||
tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX);
|
||||
out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
|
||||
clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
||||
clrbits32(bcsr5, BCSR5_MII1_EN);
|
||||
setbits32(bcsr5, BCSR5_MII1_RST);
|
||||
udelay(1000);
|
||||
clrbits32(bcsr5, BCSR5_MII1_RST);
|
||||
|
||||
init_smc2_uart_ioports(0);
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
||||
clrbits32(bcsr5, BCSR5_MII2_EN);
|
||||
setbits32(bcsr5, BCSR5_MII2_RST);
|
||||
udelay(1000);
|
||||
clrbits32(bcsr5, BCSR5_MII2_RST);
|
||||
#else
|
||||
setbits32(bcsr_io, BCSR1_RS232EN_2);
|
||||
out_be16(&cp->cp_smc[1].smc_smcmr, 0);
|
||||
out_8(&cp->cp_smc[1].smc_smce, 0);
|
||||
setbits32(bcsr5, BCSR5_MII2_EN);
|
||||
#endif
|
||||
immr_unmap(cp);
|
||||
iounmap(bcsr_io);
|
||||
|
||||
#ifdef CONFIG_FS_ENET
|
||||
/* use MDC for MII (common) */
|
||||
io_port = (iop8xx_t *) immr_map(im_ioport);
|
||||
setbits16(&io_port->iop_pdpar, 0x0080);
|
||||
clrbits16(&io_port->iop_pddir, 0x0080);
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
|
||||
clrbits32(&bcsr[4], BCSR4_ETH10_RST);
|
||||
udelay(1000);
|
||||
setbits32(&bcsr[4], BCSR4_ETH10_RST);
|
||||
|
||||
bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
|
||||
clrbits32(bcsr_io, BCSR5_MII1_EN);
|
||||
clrbits32(bcsr_io, BCSR5_MII1_RST);
|
||||
#ifndef CONFIG_FC_ENET_HAS_SCC
|
||||
clrbits32(bcsr_io, BCSR5_MII2_EN);
|
||||
clrbits32(bcsr_io, BCSR5_MII2_RST);
|
||||
setbits32(&bcsr[1], BCSR1_ETHEN);
|
||||
|
||||
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
|
||||
#else
|
||||
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
|
||||
#endif
|
||||
iounmap(bcsr_io);
|
||||
immr_unmap(io_port);
|
||||
|
||||
#endif
|
||||
/* The SCC3 enet registers overlap the SMC1 registers, so
|
||||
* one of the two must be removed from the device tree.
|
||||
*/
|
||||
|
||||
if (np) {
|
||||
of_detach_node(np);
|
||||
of_node_put(np);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PCMCIA_M8XX
|
||||
/*Set up board specific hook-ups */
|
||||
/* Set up board specific hook-ups.*/
|
||||
m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
|
||||
m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
|
||||
#endif
|
||||
}
|
||||
|
||||
static void init_fec1_ioports(struct fs_platform_info *ptr)
|
||||
static int __init mpc885ads_probe(void)
|
||||
{
|
||||
cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
|
||||
iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
|
||||
|
||||
/* configure FEC1 pins */
|
||||
setbits16(&io_port->iop_papar, 0xf830);
|
||||
setbits16(&io_port->iop_padir, 0x0830);
|
||||
clrbits16(&io_port->iop_padir, 0xf000);
|
||||
|
||||
setbits32(&cp->cp_pbpar, 0x00001001);
|
||||
clrbits32(&cp->cp_pbdir, 0x00001001);
|
||||
|
||||
setbits16(&io_port->iop_pcpar, 0x000c);
|
||||
clrbits16(&io_port->iop_pcdir, 0x000c);
|
||||
|
||||
setbits32(&cp->cp_pepar, 0x00000003);
|
||||
setbits32(&cp->cp_pedir, 0x00000003);
|
||||
clrbits32(&cp->cp_peso, 0x00000003);
|
||||
clrbits32(&cp->cp_cptr, 0x00000100);
|
||||
|
||||
immr_unmap(io_port);
|
||||
immr_unmap(cp);
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
|
||||
}
|
||||
|
||||
static void init_fec2_ioports(struct fs_platform_info *ptr)
|
||||
static struct of_device_id __initdata of_bus_ids[] = {
|
||||
{ .name = "soc", },
|
||||
{ .name = "cpm", },
|
||||
{ .name = "localbus", },
|
||||
{},
|
||||
};
|
||||
|
||||
static int __init declare_of_platform_devices(void)
|
||||
{
|
||||
cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
|
||||
iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
|
||||
|
||||
/* configure FEC2 pins */
|
||||
setbits32(&cp->cp_pepar, 0x0003fffc);
|
||||
setbits32(&cp->cp_pedir, 0x0003fffc);
|
||||
clrbits32(&cp->cp_peso, 0x000087fc);
|
||||
setbits32(&cp->cp_peso, 0x00037800);
|
||||
clrbits32(&cp->cp_cptr, 0x00000080);
|
||||
|
||||
immr_unmap(io_port);
|
||||
immr_unmap(cp);
|
||||
}
|
||||
|
||||
void init_fec_ioports(struct fs_platform_info *fpi)
|
||||
{
|
||||
int fec_no = fs_get_fec_index(fpi->fs_no);
|
||||
|
||||
switch (fec_no) {
|
||||
case 0:
|
||||
init_fec1_ioports(fpi);
|
||||
break;
|
||||
case 1:
|
||||
init_fec2_ioports(fpi);
|
||||
break;
|
||||
default:
|
||||
printk(KERN_ERR "init_fec_ioports: invalid FEC number\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
static void init_scc3_ioports(struct fs_platform_info *fpi)
|
||||
{
|
||||
unsigned *bcsr_io;
|
||||
iop8xx_t *io_port;
|
||||
cpm8xx_t *cp;
|
||||
|
||||
bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
|
||||
io_port = (iop8xx_t *) immr_map(im_ioport);
|
||||
cp = (cpm8xx_t *) immr_map(im_cpm);
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
printk(KERN_CRIT "Could not remap BCSR\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/* Enable the PHY.
|
||||
*/
|
||||
clrbits32(bcsr_io + 4, BCSR4_ETH10_RST);
|
||||
udelay(1000);
|
||||
setbits32(bcsr_io + 4, BCSR4_ETH10_RST);
|
||||
/* Configure port A pins for Txd and Rxd.
|
||||
*/
|
||||
setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
|
||||
clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
|
||||
|
||||
/* Configure port C pins to enable CLSN and RENA.
|
||||
*/
|
||||
clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
|
||||
clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
|
||||
setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
|
||||
|
||||
/* Configure port E for TCLK and RCLK.
|
||||
*/
|
||||
setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
|
||||
clrbits32(&cp->cp_pepar, PE_ENET_TENA);
|
||||
clrbits32(&cp->cp_pedir, PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
|
||||
clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
|
||||
setbits32(&cp->cp_peso, PE_ENET_TENA);
|
||||
|
||||
/* Configure Serial Interface clock routing.
|
||||
* First, clear all SCC bits to zero, then set the ones we want.
|
||||
*/
|
||||
clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
|
||||
setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
|
||||
|
||||
/* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
|
||||
*/
|
||||
clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
||||
/* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
|
||||
* by H/W setting after reset. SCC ethernet controller support only half duplex.
|
||||
* This discrepancy of modes causes a lot of carrier lost errors.
|
||||
*/
|
||||
|
||||
/* In the original SCC enet driver the following code is placed at
|
||||
the end of the initialization */
|
||||
setbits32(&cp->cp_pepar, PE_ENET_TENA);
|
||||
clrbits32(&cp->cp_pedir, PE_ENET_TENA);
|
||||
setbits32(&cp->cp_peso, PE_ENET_TENA);
|
||||
|
||||
setbits32(bcsr_io + 4, BCSR1_ETHEN);
|
||||
iounmap(bcsr_io);
|
||||
immr_unmap(io_port);
|
||||
immr_unmap(cp);
|
||||
}
|
||||
|
||||
void init_scc_ioports(struct fs_platform_info *fpi)
|
||||
{
|
||||
int scc_no = fs_get_scc_index(fpi->fs_no);
|
||||
|
||||
switch (scc_no) {
|
||||
case 2:
|
||||
init_scc3_ioports(fpi);
|
||||
break;
|
||||
default:
|
||||
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
static void init_smc1_uart_ioports(struct fs_uart_platform_info *ptr)
|
||||
{
|
||||
unsigned *bcsr_io;
|
||||
cpm8xx_t *cp;
|
||||
|
||||
cp = (cpm8xx_t *) immr_map(im_cpm);
|
||||
setbits32(&cp->cp_pepar, 0x000000c0);
|
||||
clrbits32(&cp->cp_pedir, 0x000000c0);
|
||||
clrbits32(&cp->cp_peso, 0x00000040);
|
||||
setbits32(&cp->cp_peso, 0x00000080);
|
||||
immr_unmap(cp);
|
||||
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
printk(KERN_CRIT "Could not remap BCSR1\n");
|
||||
return;
|
||||
}
|
||||
clrbits32(bcsr_io, BCSR1_RS232EN_1);
|
||||
iounmap(bcsr_io);
|
||||
}
|
||||
|
||||
static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi)
|
||||
{
|
||||
unsigned *bcsr_io;
|
||||
cpm8xx_t *cp;
|
||||
|
||||
cp = (cpm8xx_t *) immr_map(im_cpm);
|
||||
setbits32(&cp->cp_pepar, 0x00000c00);
|
||||
clrbits32(&cp->cp_pedir, 0x00000c00);
|
||||
clrbits32(&cp->cp_peso, 0x00000400);
|
||||
setbits32(&cp->cp_peso, 0x00000800);
|
||||
immr_unmap(cp);
|
||||
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
printk(KERN_CRIT "Could not remap BCSR1\n");
|
||||
return;
|
||||
}
|
||||
clrbits32(bcsr_io, BCSR1_RS232EN_2);
|
||||
iounmap(bcsr_io);
|
||||
}
|
||||
|
||||
void init_smc_ioports(struct fs_uart_platform_info *data)
|
||||
{
|
||||
int smc_no = fs_uart_id_fsid2smc(data->fs_no);
|
||||
|
||||
switch (smc_no) {
|
||||
case 0:
|
||||
init_smc1_uart_ioports(data);
|
||||
data->brg = data->clk_rx;
|
||||
break;
|
||||
case 1:
|
||||
init_smc2_uart_ioports(data);
|
||||
data->brg = data->clk_rx;
|
||||
break;
|
||||
default:
|
||||
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
int platform_device_skip(const char *model, int id)
|
||||
{
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
|
||||
const char *dev = "FEC";
|
||||
int n = 2;
|
||||
#else
|
||||
const char *dev = "SCC";
|
||||
int n = 3;
|
||||
#endif
|
||||
|
||||
if (!strcmp(model, dev) && n == id)
|
||||
return 1;
|
||||
/* Publish the QE devices */
|
||||
if (machine_is(mpc885_ads))
|
||||
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
device_initcall(declare_of_platform_devices);
|
||||
|
||||
static void __init mpc885ads_setup_arch(void)
|
||||
{
|
||||
cpm_reset();
|
||||
|
||||
mpc885ads_board_setup();
|
||||
|
||||
ROOT_DEV = Root_NFS;
|
||||
}
|
||||
|
||||
static int __init mpc885ads_probe(void)
|
||||
{
|
||||
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
|
||||
"model", NULL);
|
||||
if (model == NULL)
|
||||
return 0;
|
||||
if (strcmp(model, "MPC885ADS"))
|
||||
return 0;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
define_machine(mpc885_ads)
|
||||
{
|
||||
.name = "MPC885 ADS",
|
||||
.probe = mpc885ads_probe,
|
||||
.setup_arch = mpc885ads_setup_arch,
|
||||
.init_IRQ = m8xx_pic_init,
|
||||
.get_irq = mpc8xx_get_irq,
|
||||
.restart = mpc8xx_restart,
|
||||
.calibrate_decr = mpc8xx_calibrate_decr,
|
||||
.set_rtc_time = mpc8xx_set_rtc_time,
|
||||
.get_rtc_time = mpc8xx_get_rtc_time,
|
||||
define_machine(mpc885_ads) {
|
||||
.name = "Freescale MPC885 ADS",
|
||||
.probe = mpc885ads_probe,
|
||||
.setup_arch = mpc885ads_setup_arch,
|
||||
.init_IRQ = m8xx_pic_init,
|
||||
.get_irq = mpc8xx_get_irq,
|
||||
.restart = mpc8xx_restart,
|
||||
.calibrate_decr = mpc8xx_calibrate_decr,
|
||||
.set_rtc_time = mpc8xx_set_rtc_time,
|
||||
.get_rtc_time = mpc8xx_get_rtc_time,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue