Merge branch 'topic/workq-update' into topic/asoc

Conflicts:
	sound/soc/codecs/wm8350.c
	sound/soc/codecs/wm8753.c
	sound/soc/sh/fsi.c
	sound/soc/soc-core.c
This commit is contained in:
Takashi Iwai 2010-12-13 09:28:43 +01:00
commit 20aeeb356b
944 changed files with 16575 additions and 7947 deletions

View File

@ -0,0 +1,83 @@
What: /sys/bus/rbd/
Date: November 2010
Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
Sage Weil <sage@newdream.net>
Description:
Being used for adding and removing rbd block devices.
Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
$ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
will be assigned for any registered block device. If snapshot is used, it will
be mapped read-only.
Removal of a device:
$ echo <dev-id> > /sys/bus/rbd/remove
Entries under /sys/bus/rbd/devices/<dev-id>/
--------------------------------------------
client_id
The ceph unique client id that was assigned for this specific session.
major
The block device major number.
name
The name of the rbd image.
pool
The pool where this rbd image resides. The pool-name pair is unique
per rados system.
size
The size (in bytes) of the mapped block device.
refresh
Writing to this file will reread the image header data and set
all relevant datastructures accordingly.
current_snap
The current snapshot for which the device is mapped.
create_snap
Create a snapshot:
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
rollback_snap
Rolls back data to the specified snapshot. This goes over the entire
list of rados blocks and sends a rollback command to each.
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
snap_*
A directory per each snapshot
Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
-------------------------------------------------------------
id
The rados internal snapshot id assigned for this snapshot
size
The size of the image when this snapshot was taken.

View File

@ -79,10 +79,6 @@
</sect2>
</sect1>
</chapter>
<chapter id="clk">
<title>Clock Framework Extensions</title>
!Iinclude/linux/sh_clk.h
</chapter>
<chapter id="mach">
<title>Machine Specific Interfaces</title>
<sect1 id="dreamcast">

View File

@ -16,7 +16,7 @@
</orgname>
<address>
<email>hjk@linutronix.de</email>
<email>hjk@hansjkoch.de</email>
</address>
</affiliation>
</author>
@ -114,7 +114,7 @@ GPL version 2.
<para>If you know of any translations for this document, or you are
interested in translating it, please email me
<email>hjk@linutronix.de</email>.
<email>hjk@hansjkoch.de</email>.
</para>
</sect1>
@ -171,7 +171,7 @@ interested in translating it, please email me
<title>Feedback</title>
<para>Find something wrong with this document? (Or perhaps something
right?) I would love to hear from you. Please email me at
<email>hjk@linutronix.de</email>.</para>
<email>hjk@hansjkoch.de</email>.</para>
</sect1>
</chapter>

View File

@ -154,7 +154,7 @@ The stages that a patch goes through are, generally:
inclusion, it should be accepted by a relevant subsystem maintainer -
though this acceptance is not a guarantee that the patch will make it
all the way to the mainline. The patch will show up in the maintainer's
subsystem tree and into the staging trees (described below). When the
subsystem tree and into the -next trees (described below). When the
process works, this step leads to more extensive review of the patch and
the discovery of any problems resulting from the integration of this
patch with work being done by others.
@ -236,7 +236,7 @@ finding the right maintainer. Sending patches directly to Linus is not
normally the right way to go.
2.4: STAGING TREES
2.4: NEXT TREES
The chain of subsystem trees guides the flow of patches into the kernel,
but it also raises an interesting question: what if somebody wants to look
@ -250,7 +250,7 @@ changes land in the mainline kernel. One could pull changes from all of
the interesting subsystem trees, but that would be a big and error-prone
job.
The answer comes in the form of staging trees, where subsystem trees are
The answer comes in the form of -next trees, where subsystem trees are
collected for testing and review. The older of these trees, maintained by
Andrew Morton, is called "-mm" (for memory management, which is how it got
started). The -mm tree integrates patches from a long list of subsystem
@ -275,7 +275,7 @@ directory at:
Use of the MMOTM tree is likely to be a frustrating experience, though;
there is a definite chance that it will not even compile.
The other staging tree, started more recently, is linux-next, maintained by
The other -next tree, started more recently, is linux-next, maintained by
Stephen Rothwell. The linux-next tree is, by design, a snapshot of what
the mainline is expected to look like after the next merge window closes.
Linux-next trees are announced on the linux-kernel and linux-next mailing
@ -303,12 +303,25 @@ volatility of linux-next tends to make it a difficult development target.
See http://lwn.net/Articles/289013/ for more information on this topic, and
stay tuned; much is still in flux where linux-next is involved.
Besides the mmotm and linux-next trees, the kernel source tree now contains
the drivers/staging/ directory and many sub-directories for drivers or
filesystems that are on their way to being added to the kernel tree
proper, but they remain in drivers/staging/ while they still need more
work.
2.4.1: STAGING TREES
The kernel source tree now contains the drivers/staging/ directory, where
many sub-directories for drivers or filesystems that are on their way to
being added to the kernel tree live. They remain in drivers/staging while
they still need more work; once complete, they can be moved into the
kernel proper. This is a way to keep track of drivers that aren't
up to Linux kernel coding or quality standards, but people may want to use
them and track development.
Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree.
Drivers that still need work are sent to him, with each driver having
its own subdirectory in drivers/staging/. Along with the driver source
files, a TODO file should be present in the directory as well. The TODO
file lists the pending work that the driver needs for acceptance into
the kernel proper, as well as a list of people that should be Cc'd for any
patches to the driver. Staging drivers that don't currently build should
have their config entries depend upon CONFIG_BROKEN. Once they can
be successfully built without outside patches, CONFIG_BROKEN can be removed.
2.5: TOOLS

View File

@ -1,129 +0,0 @@
Device Interfaces
Introduction
~~~~~~~~~~~~
Device interfaces are the logical interfaces of device classes that correlate
directly to userspace interfaces, like device nodes.
Each device class may have multiple interfaces through which you can
access the same device. An input device may support the mouse interface,
the 'evdev' interface, and the touchscreen interface. A SCSI disk would
support the disk interface, the SCSI generic interface, and possibly a raw
device interface.
Device interfaces are registered with the class they belong to. As devices
are added to the class, they are added to each interface registered with
the class. The interface is responsible for determining whether the device
supports the interface or not.
Programming Interface
~~~~~~~~~~~~~~~~~~~~~
struct device_interface {
char * name;
rwlock_t lock;
u32 devnum;
struct device_class * devclass;
struct list_head node;
struct driver_dir_entry dir;
int (*add_device)(struct device *);
int (*add_device)(struct intf_data *);
};
int interface_register(struct device_interface *);
void interface_unregister(struct device_interface *);
An interface must specify the device class it belongs to. It is added
to that class's list of interfaces on registration.
Interfaces can be added to a device class at any time. Whenever it is
added, each device in the class is passed to the interface's
add_device callback. When an interface is removed, each device is
removed from the interface.
Devices
~~~~~~~
Once a device is added to a device class, it is added to each
interface that is registered with the device class. The class
is expected to place a class-specific data structure in
struct device::class_data. The interface can use that (along with
other fields of struct device) to determine whether or not the driver
and/or device support that particular interface.
Data
~~~~
struct intf_data {
struct list_head node;
struct device_interface * intf;
struct device * dev;
u32 intf_num;
};
int interface_add_data(struct interface_data *);
The interface is responsible for allocating and initializing a struct
intf_data and calling interface_add_data() to add it to the device's list
of interfaces it belongs to. This list will be iterated over when the device
is removed from the class (instead of all possible interfaces for a class).
This structure should probably be embedded in whatever per-device data
structure the interface is allocating anyway.
Devices are enumerated within the interface. This happens in interface_add_data()
and the enumerated value is stored in the struct intf_data for that device.
sysfs
~~~~~
Each interface is given a directory in the directory of the device
class it belongs to:
Interfaces get a directory in the class's directory as well:
class/
`-- input
|-- devices
|-- drivers
|-- mouse
`-- evdev
When a device is added to the interface, a symlink is created that points
to the device's directory in the physical hierarchy:
class/
`-- input
|-- devices
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|-- drivers
| `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
|-- mouse
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
`-- evdev
`-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
Future Plans
~~~~~~~~~~~~
A device interface is correlated directly with a userspace interface
for a device, specifically a device node. For instance, a SCSI disk
exposes at least two interfaces to userspace: the standard SCSI disk
interface and the SCSI generic interface. It might also export a raw
device interface.
Many interfaces have a major number associated with them and each
device gets a minor number. Or, multiple interfaces might share one
major number, and each will receive a range of minor numbers (like in
the case of input devices).
These major and minor numbers could be stored in the interface
structure. Major and minor allocations could happen when the interface
is registered with the class, or via a helper function.

View File

@ -196,7 +196,7 @@ csrow3.
The representation of the above is reflected in the directory tree
in EDAC's sysfs interface. Starting in directory
/sys/devices/system/edac/mc each memory controller will be represented
by its own 'mcX' directory, where 'X" is the index of the MC.
by its own 'mcX' directory, where 'X' is the index of the MC.
..../edac/mc/
@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
....
Under each 'mcX' directory each 'csrowX' is again represented by a
'csrowX', where 'X" is the csrow index:
'csrowX', where 'X' is the csrow index:
.../mc/mc0/
@ -232,7 +232,7 @@ EDAC control and attribute files.
In 'mcX' directories are EDAC control and attribute files for
this 'X" instance of the memory controllers:
this 'X' instance of the memory controllers:
Counter reset control file:
@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
'csrowX' DIRECTORIES
In the 'csrowX' directories are EDAC control and attribute files for
this 'X" instance of csrow:
this 'X' instance of csrow:
Total Uncorrectable Errors count attribute file:

View File

@ -4,33 +4,41 @@ please mail me.
Geert Uytterhoeven <geert@linux-m68k.org>
00-INDEX
- this file
- this file.
arkfb.txt
- info on the fbdev driver for ARK Logic chips.
aty128fb.txt
- info on the ATI Rage128 frame buffer driver.
cirrusfb.txt
- info on the driver for Cirrus Logic chipsets.
cmap_xfbdev.txt
- an introduction to fbdev's cmap structures.
deferred_io.txt
- an introduction to deferred IO.
efifb.txt
- info on the EFI platform driver for Intel based Apple computers.
ep93xx-fb.txt
- info on the driver for EP93xx LCD controller.
fbcon.txt
- intro to and usage guide for the framebuffer console (fbcon).
framebuffer.txt
- introduction to frame buffer devices.
imacfb.txt
- info on the generic EFI platform driver for Intel based Macs.
gxfb.txt
- info on the framebuffer driver for AMD Geode GX2 based processors.
intel810.txt
- documentation for the Intel 810/815 framebuffer driver.
intelfb.txt
- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
internals.txt
- quick overview of frame buffer device internals.
lxfb.txt
- info on the framebuffer driver for AMD Geode LX based processors.
matroxfb.txt
- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
metronomefb.txt
- info on the driver for the Metronome display controller.
modedb.txt
- info on the video mode database.
matroxfb.txt
- info on the Matrox frame buffer driver.
pvr2fb.txt
- info on the PowerVR 2 frame buffer driver.
pxafb.txt
@ -39,13 +47,23 @@ s3fb.txt
- info on the fbdev driver for S3 Trio/Virge chips.
sa1100fb.txt
- information about the driver for the SA-1100 LCD controller.
sh7760fb.txt
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
sisfb.txt
- info on the framebuffer device driver for various SiS chips.
sstfb.txt
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
tgafb.txt
- info on the TGA (DECChip 21030) frame buffer driver
- info on the TGA (DECChip 21030) frame buffer driver.
tridentfb.txt
info on the framebuffer driver for some Trident chip based cards.
uvesafb.txt
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
vesafb.txt
- info on the VESA frame buffer device
- info on the VESA frame buffer device.
viafb.modes
- list of modes for VIA Integration Graphic Chip.
viafb.txt
- info on the VIA Integration Graphic Chip console framebuffer driver.
vt8623fb.txt
- info on the fb driver for the graphics core in VIA VT8623 chipsets.

View File

@ -89,7 +89,7 @@ static ssize_t childless_storeme_write(struct childless *childless,
char *p = (char *) page;
tmp = simple_strtoul(p, &p, 10);
if (!p || (*p && (*p != '\n')))
if ((*p != '\0') && (*p != '\n'))
return -EINVAL;
if (tmp > INT_MAX)

View File

@ -660,11 +660,10 @@ struct address_space_operations {
releasepage: releasepage is called on PagePrivate pages to indicate
that the page should be freed if possible. ->releasepage
should remove any private data from the page and clear the
PagePrivate flag. It may also remove the page from the
address_space. If this fails for some reason, it may indicate
failure with a 0 return value.
This is used in two distinct though related cases. The first
is when the VM finds a clean page with no active users and
PagePrivate flag. If releasepage() fails for some reason, it must
indicate failure with a 0 return value.
releasepage() is used in two distinct though related cases. The
first is when the VM finds a clean page with no active users and
wants to make it a free page. If ->releasepage succeeds, the
page will be removed from the address_space and become free.

View File

@ -617,6 +617,16 @@ and have the following read/write attributes:
is configured as an output, this value may be written;
any nonzero value is treated as high.
If the pin can be configured as interrupt-generating interrupt
and if it has been configured to generate interrupts (see the
description of "edge"), you can poll(2) on that file and
poll(2) will return whenever the interrupt was triggered. If
you use poll(2), set the events POLLPRI and POLLERR. If you
use select(2), set the file descriptor in exceptfds. After
poll(2) returns, either lseek(2) to the beginning of the sysfs
file and read the new value or close the file and re-open it
to read the value.
"edge" ... reads as either "none", "rising", "falling", or
"both". Write these strings to select the signal edge(s)
that will make poll(2) on the "value" file return.

View File

@ -11,7 +11,7 @@ Authors:
Mark M. Hoffman <mhoffman@lightlink.com>
Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
Module Parameters
-----------------

View File

@ -8,7 +8,7 @@ Supported chips:
Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
Authors:
Hans J. Koch <hjk@linutronix.de>
Hans J. Koch <hjk@hansjkoch.de>
John Morris <john.morris@spirentcom.com>
Claus Gindhart <claus.gindhart@kontron.com>

View File

@ -2385,6 +2385,11 @@ and is between 256 and 4096 characters. It is defined in the file
improve throughput, but will also increase the
amount of memory reserved for use by the client.
swapaccount[=0|1]
[KNL] Enable accounting of swap in memory resource
controller if no parameter or 1 is given or disable
it if 0 is given (See Documentation/cgroups/memory.txt)
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]

View File

@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
Count buffering overhead as bytes/2^tcp_adv_win_scale
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
if it is <= 0.
Possible values are [-31, 31], inclusive.
Default: 2
tcp_allowed_congestion_control - STRING

View File

@ -37,6 +37,9 @@ Typical usage of the OPP library is as follows:
SoC framework -> modifies on required cases certain OPPs -> OPP layer
-> queries to search/retrieve information ->
Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
to make the OPP layer available.
OPP layer expects each domain to be represented by a unique device pointer. SoC
framework registers a set of initial OPPs per device with the OPP layer. This
list is expected to be an optimally small number typically around 5 per device.

View File

@ -1,32 +0,0 @@
Clock framework on SuperH architecture
The framework on SH extends existing API by the function clk_set_rate_ex,
which prototype is as follows:
clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
The algo_id parameter is used to specify algorithm used to recalculate clocks,
adjanced to clock, specified as first argument. It is assumed that algo_id==0
means no changes to adjanced clock
Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
if it is present in ops structure. The method should set the clock rate and adjust
all needed clocks according to the passed algo_id.
Exact values for algo_id are machine-dependent. For the sh7722, the following
values are defined:
NO_CHANGE = 0,
IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */
IUS_322, /* I:U:Sh = 3:2:2 */
IUS_522, /* I:U:Sh = 5:2:2 */
IUS_N11, /* I:U:Sh = N:1:1 */
SB_N1, /* Sh:B = N:1 */
SB3_N1, /* Sh:B3 = N:1 */
SB3_32, /* Sh:B3 = 3:2 */
SB3_43, /* Sh:B3 = 4:3 */
SB3_54, /* Sh:B3 = 5:4 */
BP_N1, /* B:P = N:1 */
IP_N1 /* I:P = N:1 */
Each of these constants means relation between clocks that can be set via the FRQCR
register

View File

@ -1359,7 +1359,7 @@ F: include/net/bluetooth/
BONDING DRIVER
M: Jay Vosburgh <fubar@us.ibm.com>
L: bonding-devel@lists.sourceforge.net
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
F: drivers/net/bonding/
@ -1829,6 +1829,13 @@ W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb4vf/
STMMAC ETHERNET DRIVER
M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
L: netdev@vger.kernel.org
W: http://www.stlinux.com
S: Supported
F: drivers/net/stmmac/
CYBERPRO FB DRIVER
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -2008,6 +2015,7 @@ F: drivers/hwmon/dme1737.c
DOCBOOK FOR DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
S: Maintained
F: scripts/kernel-doc
DOCKING STATION DRIVER
M: Shaohua Li <shaohua.li@intel.com>
@ -2018,6 +2026,7 @@ F: drivers/acpi/dock.c
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
T: quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
S: Maintained
F: Documentation/
@ -2051,7 +2060,7 @@ F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
F: drivers/base/
@ -2071,7 +2080,7 @@ F: include/drm/
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Chris Wilson <chris@chris-wilson.co.uk>
L: intel-gfx@lists.freedesktop.org
L: intel-gfx@lists.freedesktop.org (subscribers-only)
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
S: Supported
@ -2435,10 +2444,12 @@ F: drivers/net/wan/sdla.c
FRAMEBUFFER LAYER
L: linux-fbdev@vger.kernel.org
W: http://linux-fbdev.sourceforge.net/
Q: http://patchwork.kernel.org/project/linux-fbdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
S: Orphan
F: Documentation/fb/
F: drivers/video/fb*
F: drivers/video/
F: include/video/
F: include/linux/fb.h
FREESCALE DMA DRIVER
@ -4053,9 +4064,8 @@ F: drivers/scsi/NCR_D700.*
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
M: Chien Tung <chien.tin.tung@intel.com>
L: linux-rdma@vger.kernel.org
W: http://www.neteffect.com
W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
S: Supported
F: drivers/infiniband/hw/nes/
@ -5828,6 +5838,8 @@ M: Chris Metcalf <cmetcalf@tilera.com>
W: http://www.tilera.com/scm/
S: Supported
F: arch/tile/
F: drivers/char/hvc_tile.c
F: drivers/net/tile/
TLAN NETWORK DRIVER
M: Samuel Chessman <chessman@tux.org>

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
EXTRAVERSION = -rc2
EXTRAVERSION = -rc5
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*

View File

@ -9,7 +9,7 @@ config ARM
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)

View File

@ -70,12 +70,7 @@ else
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
else
$(obj)/uImage: STARTADDR=$(LOADADDR)
endif
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)

View File

@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
.size _start, . - _start
.align
.type data,#object
data: .word initrd_start @ source initrd address
.word initrd_phys @ destination initrd address

View File

@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
* sort out different calling conventions
*/
.align
.arm @ Always enter in ARM state
start:
.type start,#function
.rept 8
THUMB( adr r12, BSYM(1f) )
THUMB( bx r12 )
THUMB( .rept 6 )
ARM( .rept 8 )
mov r0, r0
.endr
@ -135,6 +139,7 @@ start:
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
@ -174,7 +179,8 @@ not_angel:
ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
and r4, pc, #0xf8000000
mov r4, pc
and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
*/
mov r1, #0x1e
orr r1, r1, #3 << 10
mov r2, pc, lsr #20
mov r2, pc
mov r2, r2, lsr #20
orr r1, r1, r2, lsl #20
add r0, r3, r2, lsl #2
str r1, [r0], #4
@ -1084,6 +1091,6 @@ memdump: mov r12, r0
reloc_end:
.align
.section ".stack", "w"
.section ".stack", "aw", %nobits
user_stack: .space 4096
user_stack_end:

View File

@ -57,7 +57,7 @@ SECTIONS
.bss : { *(.bss) }
_end = .;
.stack (NOLOAD) : { *(.stack) }
.stack : { *(.stack) }
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }

View File

@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
u32 val;
struct irq_desc *desc;
spin_lock(&irq_controller_lock);
irq_desc[irq].node = cpu;
desc = irq_to_desc(irq);
if (desc == NULL) {
spin_unlock(&irq_controller_lock);
return -EINVAL;
}
desc->node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
unsigned int max_irq, i;
unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
/*
* Find out how many interrupts are supported.
*/
max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
max_irq = (max_irq + 1) * 32;
/*
* The GIC only supports up to 1020 interrupt sources.
* Limit this to either the architected maximum, or the
* platform maximum.
*/
if (max_irq > max(1020, NR_IRQS))
max_irq = max(1020, NR_IRQS);
gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < max_irq; i += 16)
for (i = 32; i < gic_irqs; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
for (i = 32; i < max_irq; i += 4)
for (i = 32; i < gic_irqs; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
for (i = 32; i < max_irq; i += 4)
for (i = 32; i < gic_irqs; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
for (i = 32; i < max_irq; i += 32)
for (i = 32; i < gic_irqs; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
* Limit number of interrupts registered to the platform maximum
*/
irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
if (WARN_ON(irq_limit > NR_IRQS))
irq_limit = NR_IRQS;
/*
* Setup the Linux IRQ subsystem.
*/
for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);

View File

@ -0,0 +1,341 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ONEARM=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_AT91RM9200EK=y
CONFIG_MACH_CSB337=y
CONFIG_MACH_CSB637=y
CONFIG_MACH_CARMEVA=y
CONFIG_MACH_ATEB9200=y
CONFIG_MACH_KB9200=y
CONFIG_MACH_PICOTUX2XX=y
CONFIG_MACH_KAFA=y
CONFIG_MACH_ECBAT91=y
CONFIG_MACH_YL9200=y
CONFIG_MACH_CPUAT91=y
CONFIG_MACH_ECO920=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_BITBANG=y
CONFIG_GPIO_SYSFS=y
CONFIG_HWMON=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_S1D13XXX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_DISPLAY_SUPPORT=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_AT91=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_REISERFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y

View File

@ -1,72 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_ECO920=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y

View File

@ -1,73 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_AT91RM9200EK=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_S1D13XXX=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y

View File

@ -1,131 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_MACH_ATEB9200=y
CONFIG_PCCARD=m
CONFIG_AT91_CF=m
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK_RO=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_GADGET=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_REISERFS_FS=m
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRC16=m
CONFIG_LIBCRC32C=m

View File

@ -1,47 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
# CONFIG_HOTPLUG is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_MACH_CARMEVA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO=m
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_DNOTIFY is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y

View File

@ -1,112 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CPUAT91=y
CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set

View File

@ -1,104 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CSB337=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y

View File

@ -1,98 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CSB637=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y

View File

@ -1,99 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ECBAT91=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_MAC80211=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_REISERFS_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y

View File

@ -1,61 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_KAFA=y
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK_RO=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y

View File

@ -1,127 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_KB9200=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set

View File

@ -1,80 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ONEARM=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y

View File

@ -1,242 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_PICOTUX2XX=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_FW_LOADER=m
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
CONFIG_HWMON=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=m
CONFIG_HID=m
CONFIG_USB=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_PL2303=m
CONFIG_MMC=m
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_AMIGA_PARTITION=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_LIBCRC32C=m

View File

@ -1,137 +0,0 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_YL9200=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=3
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_ATMEL=y
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_DISPLAY_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_REISERFS_FS=y
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=1
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y

View File

@ -238,7 +238,7 @@
@ Slightly optimised to avoid incrementing the pointer twice
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
.if \rept == 2
usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
.endif
add\cond \ptr, #\rept * \inc

View File

@ -13,6 +13,10 @@ typedef struct {
#ifdef CONFIG_CPU_HAS_ASID
#define ASID(mm) ((mm)->context.id & 255)
/* init_mm.context.id_lock should be initialized. */
#define INIT_MM_CONTEXT(name) \
.context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
#else
#define ASID(mm) (0)
#endif

View File

@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
/* we don't need complex calculations here as the pmd is folded into the pgd */
#define pmd_addr_end(addr,end) (end)
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.

View File

@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
ldr r7, =1f @ it's 20 bits
ldr r7, 1f @ it's 20 bits
swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
1: .word __ARM_NR_cmpxchg

View File

@ -85,9 +85,11 @@ ENTRY(stext)
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
@ -262,6 +264,7 @@ __create_page_tables:
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
.align
__enable_mmu_loc:
.long .
.long __enable_mmu
@ -282,6 +285,7 @@ ENTRY(secondary_startup)
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p
/*
@ -308,6 +312,8 @@ ENTRY(__secondary_switched)
b secondary_start_kernel
ENDPROC(__secondary_switched)
.align
.type __secondary_data, %object
__secondary_data:
.long .
@ -413,6 +419,7 @@ __fixup_smp_on_up:
mov pc, lr
ENDPROC(__fixup_smp)
.align
1: .word .
.word __smpalt_begin
.word __smpalt_end

View File

@ -59,6 +59,8 @@ relocate_new_kernel:
ldr r2,kexec_boot_atags
mov pc,lr
.align
.globl kexec_start_address
kexec_start_address:
.long 0x0

View File

@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
*/
.L_found:
#if __LINUX_ARM_ARCH__ >= 5
rsb r1, r3, #0
and r3, r3, r1
rsb r0, r3, #0
and r3, r3, r0
clz r3, r3
rsb r3, r3, #31
add r0, r2, r3
@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
addeq r2, r2, #1
mov r0, r2
#endif
cmp r1, r0 @ Clamp to maxbit
movlo r0, r1
mov pc, lr

View File

@ -11,6 +11,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL
#endif /* __ASM_ARCH_VMALLOC_H */

View File

@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o

View File

@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
/* Fill in list of supported UARTs */
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91rm9200_uart0_device;
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
break;
case 1:
configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91rm9200_uart1_device;
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
break;
case 2:
configure_usart2_pins(0);
at91_uarts[i] = &at91rm9200_uart2_device;
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
break;
case 3:
configure_usart3_pins(0);
at91_uarts[i] = &at91rm9200_uart3_device;
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
break;
case 4:
configure_dbgu_pins();
at91_uarts[i] = &at91rm9200_dbgu_device;
at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
break;
default:
continue;
}
at91_uarts[i]->id = i; /* update ID number to mapped ID */
}
/* Set serial console device */
if (config->console_tty < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[config->console_tty];
if (!atmel_default_console_device)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;

View File

@ -39,24 +39,24 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata onearm_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 3,
.tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
};
static void __init onearm_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
/* Setup the serial ports and console */
at91_init_serial(&onearm_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init onearm_init_irq(void)

View File

@ -39,17 +39,6 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata kafa_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init kafa_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
/* Setup the serial ports and console */
at91_init_serial(&kafa_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init kafa_init_irq(void)

View File

@ -43,24 +43,21 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata picotux200_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init picotux200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the serial ports and console */
at91_init_serial(&picotux200_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init picotux200_init_irq(void)
@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
.ports = 1,
};
// static struct at91_udc_data __initdata picotux200_udc_data = {
// .vbus_pin = AT91_PIN_PD4,
// .pullup_pin = AT91_PIN_PD5,
// };
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
.wp_pin = AT91_PIN_PA17,
};
// static struct spi_board_info picotux200_spi_devices[] = {
// { /* DataFlash chip */
// .modalias = "mtd_dataflash",
// .chip_select = 0,
// .max_speed_hz = 15 * 1000 * 1000,
// },
// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
// { /* DataFlash card */
// .modalias = "mtd_dataflash",
// .chip_select = 3,
// .max_speed_hz = 15 * 1000 * 1000,
// },
// #endif
// };
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE SZ_4M
@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
at91_add_device_eth(&picotux200_eth_data);
/* USB Host */
at91_add_device_usbh(&picotux200_usbh_data);
/* USB Device */
// at91_add_device_udc(&picotux200_udc_data);
// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
/* DataFlash card */
at91_set_gpio_output(AT91_PIN_PB22, 0);
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
#endif
/* NOR Flash */
platform_device_register(&picotux200_flash);
}

View File

@ -1,5 +1,5 @@
/*
* linux/arch/arm/mach-at91/board-dk.c
* linux/arch/arm/mach-at91/board-rm9200dk.c
*
* Copyright (C) 2005 SAN People
*
@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
// .vcc_pin = ... always powered
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata dk_mmc_data = {
.slot_b = 0,
.wire4 = 1,
};
#endif
static struct spi_board_info dk_spi_devices[] = {
{ /* DataFlash chip */

View File

@ -1,5 +1,5 @@
/*
* linux/arch/arm/mach-at91/board-ek.c
* linux/arch/arm/mach-at91/board-rm9200ek.c
*
* Copyright (C) 2005 SAN People
*
@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
.pullup_pin = AT91_PIN_PD5,
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata ek_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
};
#endif
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */

View File

@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
* EPSON S1D13806 FB (discontinued chip)
* EPSON S1D13506 FB
*/
#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>

View File

@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
extern void __init at91_set_serial_console(unsigned portnr);
struct at91_uart_config {
unsigned short console_tty; /* tty number of serial console */
unsigned short nr_tty; /* number of serial tty's */
short tty_map[]; /* map UART to tty number */
};
extern struct platform_device *atmel_default_console_device;
extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */

View File

@ -22,4 +22,4 @@
* 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
* larger physical memory designs better.
*/
#define VMALLOC_END 0xf0000000
#define VMALLOC_END 0xf0000000UL

View File

@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL

View File

@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
{
int i;
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {

View File

@ -7,4 +7,4 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define VMALLOC_END 0xdf000000
#define VMALLOC_END 0xdf000000UL

View File

@ -7,4 +7,4 @@
*/
#define VMALLOC_END 0xf0000000
#define VMALLOC_END 0xf0000000UL

View File

@ -5,6 +5,6 @@
#ifndef __ARCH_ARM_VMALLOC_H
#define __ARCH_ARM_VMALLOC_H
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL
#endif

View File

@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
#define ADS7846_PENDOWN (GPIO_PORTD | 25)
static void ads7846_dev_init(void)
@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = {
.get_pendown_state = ads7846_get_pendown_state,
.keep_vref_on = 1,
};
#endif
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
[0] = {
.modalias = "ads7846",
@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
.chipselect = eukrea_mbimx27_spi_cs,
.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
};
#endif
static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
{

View File

@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL

View File

@ -16,7 +16,7 @@
#ifndef __ASM_ARCH_MSM_VMALLOC_H
#define __ASM_ARCH_MSM_VMALLOC_H
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL
#endif

View File

@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
#define imx25_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
#define imx25_add_spi_imx(id, pdata) \
imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
imx_add_spi_imx(&imx25_cspi_data[id], pdata)
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)

View File

@ -14,6 +14,7 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/spi.h>
#include <asm/mach-types.h>
@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = {
};
/* Platform Data for MXC CSPI */
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
.chipselect = pcm037_spi1_cs,
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
};
#endif
/* GPIO-keys input device */
static struct gpio_keys_button pcm037_gpio_keys[] = {
@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = {
},
};
static int eet_init_devices(void)
static int __init eet_init_devices(void)
{
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
return 0;

View File

@ -16,4 +16,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL

View File

@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END 0xd8000000
#define VMALLOC_END 0xd8000000UL

View File

@ -17,4 +17,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END 0xf8000000
#define VMALLOC_END 0xf8000000UL

View File

@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void)
if (omap_irq_pending())
goto no_sleep;
/* Block console output in case it is on one of the OMAP UARTs */
if (try_acquire_console_sem())
goto no_sleep;
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
omap_uart_prepare_idle(2);
@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void)
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
release_console_sem();
no_sleep:
if (omap2_pm_debug) {
unsigned long long tmp;

View File

@ -28,6 +28,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
@ -385,6 +386,12 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
/* Block console output in case it is on one of the OMAP UARTs */
if (per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)
if (try_acquire_console_sem())
goto console_still_active;
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
@ -463,6 +470,9 @@ void omap_sram_idle(void)
omap_uart_resume_idle(3);
}
release_console_sem();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||

View File

@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/serial_8250.h>
#include <linux/pm_runtime.h>
#include <linux/console.h>
#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
struct omap_uart_state *uart;
list_for_each_entry(uart, &uart_list, node) {
if (num == uart->num) {
if (num == uart->num && uart->can_sleep) {
omap_uart_enable_clocks(uart);
/* Check for IO pad wakeup */
@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
oh->dev_attr = uart;
acquire_console_sem(); /* in case the earlycon is on the UART */
/*
* Because of early UART probing, UART did not get idled
* on init. Now that omap_device is ready, ensure full idle
@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
release_console_sem();
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(&od->pdev.dev, true);

View File

@ -17,4 +17,4 @@
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL

View File

@ -35,5 +35,6 @@ pen: ldr r7, [r6]
*/
b secondary_startup
.align
1: .long .
.long pen_release

View File

@ -7,4 +7,4 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define VMALLOC_END 0xdc000000
#define VMALLOC_END 0xdc000000UL

View File

@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
/* Configures BT serial port GPIOs */
s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,

View File

@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2416_irq_uart3_mask(unsigned int irqno)
{

View File

@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2443_irq_uart3_mask(unsigned int irqno)
{

View File

@ -45,7 +45,7 @@
#include <video/platform_lcd.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)

View File

@ -46,7 +46,7 @@
#include <video/platform_lcd.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)

View File

@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/i2c.h>
#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

View File

@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

View File

@ -1,4 +1,4 @@
/*
* arch/arm/mach-shark/include/mach/vmalloc.h
*/
#define VMALLOC_END 0xd0000000
#define VMALLOC_END 0xd0000000UL

View File

@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
static int __fsi_set_rate(struct clk *clk, long rate, int enable)
{
int ret = 0;
static int fsi_set_rate(int is_porta, int rate)
if (rate <= 0)
return ret;
if (enable) {
ret = clk_set_rate(clk, rate);
if (0 == ret)
ret = clk_enable(clk);
} else {
clk_disable(clk);
}
return ret;
}
static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
{
return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
}
static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
{
struct clk *fsia_ick;
struct clk *fsiack;
int ret = -EIO;
fsia_ick = clk_get(dev, "icka");
if (IS_ERR(fsia_ick))
return PTR_ERR(fsia_ick);
/*
* FSIACK is connected to AK4642,
* and use external clock pin from it.
* it is parent of fsia_ick now.
*/
fsiack = clk_get_parent(fsia_ick);
if (!fsiack)
goto fsia_ick_out;
/*
* we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
*
** FIXME **
* Because the freq_table of external clk (fsiack) are all 0,
* the return value of clk_round_rate became 0.
* So, it use __fsi_set_rate here.
*/
ret = __fsi_set_rate(fsiack, rate, enable);
if (ret < 0)
goto fsiack_out;
ret = __fsi_set_round_rate(fsia_ick, rate, enable);
if ((ret < 0) && enable)
__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
fsiack_out:
clk_put(fsiack);
fsia_ick_out:
clk_put(fsia_ick);
return 0;
}
static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
{
struct clk *fsib_clk;
struct clk *fdiv_clk = &sh7372_fsidivb_clk;
long fsib_rate = 0;
long fdiv_rate = 0;
int ackmd_bpfmd;
int ret;
/* set_rate is not needed if port A */
if (is_porta)
return 0;
fsib_clk = clk_get(NULL, "fsib_clk");
if (IS_ERR(fsib_clk))
return -EINVAL;
switch (rate) {
case 44100:
clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
fsib_rate = rate * 256;
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
break;
case 48000:
clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
fdiv_rate = rate * 256;
ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
break;
default:
pr_err("unsupported rate in FSI2 port B\n");
ret = -EINVAL;
break;
return -EINVAL;
}
/* FSI B setting */
fsib_clk = clk_get(dev, "ickb");
if (IS_ERR(fsib_clk))
return -EIO;
ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
clk_put(fsib_clk);
if (ret < 0)
return ret;
/* FSI DIV setting */
ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
if (ret < 0) {
/* disable FSI B */
if (enable)
__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
return ret;
}
return ackmd_bpfmd;
}
static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
{
int ret;
if (is_porta)
ret = fsi_ak4642_set_rate(dev, rate, enable);
else
ret = fsi_hdmi_set_rate(dev, rate, enable);
return ret;
}
@ -885,6 +974,11 @@ static int __init hdmi_init_pm_clock(void)
goto out;
}
ret = clk_enable(&sh7372_pllc2_clk);
if (ret < 0) {
pr_err("Cannot enable pllc2 clock\n");
goto out;
}
pr_debug("PLLC2 set frequency %lu\n", rate);
ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@ -901,23 +995,11 @@ out:
device_initcall(hdmi_init_pm_clock);
#define FSIACK_DUMMY_RATE 48000
static int __init fsi_init_pm_clock(void)
{
struct clk *fsia_ick;
int ret;
/*
* FSIACK is connected to AK4642,
* and the rate is depend on playing sound rate.
* So, set dummy rate (= 48k) here
*/
ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
if (ret < 0) {
pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
return ret;
}
fsia_ick = clk_get(&fsi_device.dev, "icka");
if (IS_ERR(fsia_ick)) {
ret = PTR_ERR(fsia_ick);
@ -926,16 +1008,9 @@ static int __init fsi_init_pm_clock(void)
}
ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
if (ret < 0) {
pr_err("Cannot set FSI-A parent: %d\n", ret);
goto out;
}
ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
if (ret < 0)
pr_err("Cannot set FSI-A rate: %d\n", ret);
pr_err("Cannot set FSI-A parent: %d\n", ret);
out:
clk_put(fsia_ick);
return ret;

View File

@ -220,8 +220,7 @@ static void pllc2_disable(struct clk *clk)
__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
}
static int pllc2_set_rate(struct clk *clk,
unsigned long rate, int algo_id)
static int pllc2_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long value;
int idx;
@ -230,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk,
if (idx < 0)
return idx;
if (rate == clk->parent->rate) {
pllc2_disable(clk);
return 0;
}
if (rate == clk->parent->rate)
return -EINVAL;
value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
if (value & 0x80000000)
pllc2_disable(clk);
__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
if (value & 0x80000000)
return pllc2_enable(clk);
return 0;
}
@ -453,32 +444,24 @@ static int fsidiv_enable(struct clk *clk)
unsigned long value;
value = __raw_readl(clk->mapping->base) >> 16;
if (value < 2) {
fsidiv_disable(clk);
return -ENOENT;
}
if (value < 2)
return -EIO;
__raw_writel((value << 16) | 0x3, clk->mapping->base);
return 0;
}
static int fsidiv_set_rate(struct clk *clk,
unsigned long rate, int algo_id)
static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
{
int idx;
if (clk->parent->rate == rate) {
fsidiv_disable(clk);
return 0;
}
idx = (clk->parent->rate / rate) & 0xffff;
if (idx < 2)
return -ENOENT;
return -EINVAL;
__raw_writel(idx << 16, clk->mapping->base);
return fsidiv_enable(clk);
return 0;
}
static struct clk_ops fsidiv_clk_ops = {
@ -609,8 +592,6 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@ -647,8 +628,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */

View File

@ -21,8 +21,8 @@
#include <mach/io.h>
.macro addruart, rp, rv
ldreq \rp, =IO_APB_PHYS @ physical
ldrne \rv, =IO_APB_VIRT @ virtual
ldr \rp, =IO_APB_PHYS @ physical
ldr \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)

View File

@ -75,14 +75,14 @@ void __init ux500_init_irq(void)
static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
{
/* wait for the operation to complete */
while (readl(reg) & mask)
while (readl_relaxed(reg) & mask)
;
}
static inline void ux500_cache_sync(void)
{
void __iomem *base = __io_address(UX500_L2CC_BASE);
writel(0, base + L2X0_CACHE_SYNC);
writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
}
@ -107,7 +107,7 @@ static void ux500_l2x0_inv_all(void)
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */
writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync();
}

View File

@ -18,4 +18,4 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END 0xd8000000
#define VMALLOC_END 0xd8000000UL

View File

@ -35,5 +35,6 @@ pen: ldr r7, [r6]
*/
b secondary_startup
.align
1: .long .
.long pen_release

View File

@ -206,8 +206,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
*/
if (pfn_valid(pfn)) {
printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
"to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
"will fail in the next kernel release. Please fix your driver.\n");
WARN_ON(1);
}

View File

@ -381,7 +381,7 @@ __v7_ca9mp_proc_info:
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_ca9mp_setup
W(b) __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
@ -413,7 +413,7 @@ __v7_proc_info:
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_setup
W(b) __v7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS

View File

@ -18,6 +18,7 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
@ -36,7 +37,7 @@
/*
* IOP clocksource (free-running timer 1).
*/
static cycle_t iop_clocksource_read(struct clocksource *unused)
static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
{
return 0xffffffffu - read_tcr1();
}

View File

@ -12,15 +12,7 @@
#include <mach/hardware.h>
#include <mach/devices-common.h>
#ifdef SDMA_IS_MERGED
#include <mach/sdma.h>
#else
struct sdma_platform_data {
int sdma_version;
char *cpu_name;
int to_version;
};
#endif
struct imx_imx_sdma_data {
resource_size_t iobase;

View File

@ -27,6 +27,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
imx21_cspi_data_entry(0, 1),
imx21_cspi_data_entry(1, 2),
};
#endif
#ifdef CONFIG_ARCH_MX25

View File

@ -3,6 +3,7 @@
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
* Copyright (C) 2010 Linus Walleij for ST-Ericsson
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
@ -16,11 +17,13 @@
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
#include <linux/cnt32_to_63.h>
#include <linux/timer.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
void __iomem *mtu_base; /* ssigned by machine code */
void __iomem *mtu_base; /* Assigned by machine code */
/*
* Kernel assumes that sched_clock can be called early
@ -48,16 +51,82 @@ static struct clocksource nmdk_clksrc = {
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel. We accept that
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by OMAP implementation.)
* better resolution when scheduling the kernel.
*
* Because the hardware timer period may be quite short
* (32.3 secs on the 133 MHz MTU timer selection on ux500)
* and because cnt32_to_63() needs to be called at least once per
* half period to work properly, a kernel keepwarm() timer is set up
* to ensure this requirement is always met.
*
* Also the sched_clock timer will wrap around at some point,
* here we set it to run continously for a year.
*/
#define SCHED_CLOCK_MIN_WRAP 3600*24*365
static struct timer_list cnt32_to_63_keepwarm_timer;
static u32 sched_mult;
static u32 sched_shift;
unsigned long long notrace sched_clock(void)
{
return clocksource_cyc2ns(nmdk_clksrc.read(
&nmdk_clksrc),
nmdk_clksrc.mult,
nmdk_clksrc.shift);
u64 cycles;
if (unlikely(!mtu_base))
return 0;
cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
/*
* sched_mult is guaranteed to be even so will
* shift out bit 63
*/
return (cycles * sched_mult) >> sched_shift;
}
/* Just kick sched_clock every so often */
static void cnt32_to_63_keepwarm(unsigned long data)
{
mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
(void) sched_clock();
}
/*
* Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
* once in half a 32bit timer wrap interval.
*/
static void __init nmdk_sched_clock_init(unsigned long rate)
{
u32 v;
unsigned long delta;
u64 days;
/* Find the apropriate mult and shift factors */
clocks_calc_mult_shift(&sched_mult, &sched_shift,
rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
/* We need to multiply by an even number to get rid of bit 63 */
if (sched_mult & 1)
sched_mult++;
/* Let's see what we get, take max counter and scale it */
days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
do_div(days, NSEC_PER_SEC);
do_div(days, (3600*24));
pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
(64 - sched_shift), rate, (unsigned long) days);
/*
* Program a timer to kick us at half 32bit wraparound
* Formula: seconds per wrap = (2^32) / f
*/
v = 0xFFFFFFFFUL / rate;
/* We want half of the wrap time to keep cnt32_to_63 warm */
v /= 2;
pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
"initialize keepwarm timer every %d seconds\n", rate, v);
/* Convert seconds to jiffies */
delta = msecs_to_jiffies(v*1000);
setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
}
/* Clockevent device: use one-shot mode */
@ -161,13 +230,15 @@ void __init nmdk_timer_init(void)
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
/* Now the scheduling clock is ready */
/* Now the clock source is ready */
nmdk_clksrc.read = nmdk_read_timer;
if (clocksource_register(&nmdk_clksrc))
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
nmdk_sched_clock_init(rate);
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);

View File

@ -17,6 +17,9 @@
/* Require clock free running */
#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
/* Board design supports 8-bit data on SD/SDIO BUS */
#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
/*
* struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
* @max_speed: the maximum speed supported

View File

@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
}
}

View File

@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
}
}

View File

@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
}
}

View File

@ -206,6 +206,7 @@ ENTRY(vfp_save_state)
mov pc, lr
ENDPROC(vfp_save_state)
.align
last_VFP_context_address:
.word last_VFP_context

Some files were not shown because too many files have changed in this diff Show More