ARM: 6629/2: aaec2000: remove support for mach-aaec2000

mach-aaec2000 is no longer actively maintained and is only receiving
fixups to remain building with other kernel updates.

Cc: Bellido Nicolas <ml@acolin.be>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Jamie Iles 2011-01-21 13:21:10 +01:00 committed by Russell King
parent 82e6923e18
commit 21bd6d37cf
20 changed files with 0 additions and 1018 deletions

View File

@ -212,15 +212,6 @@ choice
prompt "ARM system type"
default ARCH_VERSATILE
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Agilent AAEC-2000
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
@ -871,8 +862,6 @@ endchoice
# Kconfigs may be included either alphabetically (according to the
# plat- suffix) or along side the corresponding mach-* source.
#
source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcmring/Kconfig"

View File

@ -126,7 +126,6 @@ endif
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x

View File

@ -1,11 +0,0 @@
if ARCH_AAEC2000
menu "Agilent AAEC-2000 Implementations"
config MACH_AAED2000
bool "Agilent AAED-2000 Development Platform"
select CPU_ARM920T
endmenu
endif

View File

@ -1,9 +0,0 @@
#
# Makefile for the linux kernel.
#
# Common support (must be linked before board specific support)
obj-y += core.o
# Specific board support
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o

View File

@ -1 +0,0 @@
zreladdr-y := 0xf0008000

View File

@ -1,102 +0,0 @@
/*
* linux/arch/arm/mach-aaec2000/aaed2000.c
*
* Support for the Agilent AAED-2000 Development Platform.
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/aaed2000.h>
#include "core.h"
static void aaed2000_clcd_disable(struct clcd_fb *fb)
{
AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
}
static void aaed2000_clcd_enable(struct clcd_fb *fb)
{
AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
}
struct aaec2000_clcd_info clcd_info = {
.enable = aaed2000_clcd_enable,
.disable = aaed2000_clcd_disable,
.panel = {
.mode = {
.name = "Sharp",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39721,
.left_margin = 20,
.right_margin = 44,
.upper_margin = 21,
.lower_margin = 34,
.hsync_len = 96,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_IVS | TIM2_IHS,
.cntl = CNTL_LCDTFT,
.bpp = 16,
},
};
static void __init aaed2000_init_irq(void)
{
aaec2000_init_irq();
}
static void __init aaed2000_init(void)
{
aaec2000_set_clcd_plat_data(&clcd_info);
}
static struct map_desc aaed2000_io_desc[] __initdata = {
{
.virtual = EXT_GPIO_VBASE,
.pfn = __phys_to_pfn(EXT_GPIO_PBASE),
.length = EXT_GPIO_LENGTH,
.type = MT_DEVICE
},
};
static void __init aaed2000_map_io(void)
{
aaec2000_map_io();
iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
}
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
/* Maintainer: Nicolas Bellido Y Ortega */
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
.init_machine = aaed2000_init,
MACHINE_END

View File

@ -1,298 +0,0 @@
/*
* linux/arch/arm/mach-aaec2000/core.c
*
* Code common to all AAEC-2000 machines
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
#include <linux/clk.h>
#include <linux/gfp.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include "core.h"
/*
* Common I/O mapping:
*
* Static virtual address mappings are as follow:
*
* 0xf8000000-0xf8001ffff: Devices connected to APB bus
* 0xf8002000-0xf8003ffff: Devices connected to AHB bus
*
* Below 0xe8000000 is reserved for vm allocation.
*
* The machine specific code must provide the extra mapping beside the
* default mapping provided here.
*/
static struct map_desc standard_io_desc[] __initdata = {
{
.virtual = VIO_APB_BASE,
.pfn = __phys_to_pfn(PIO_APB_BASE),
.length = IO_APB_LENGTH,
.type = MT_DEVICE
}, {
.virtual = VIO_AHB_BASE,
.pfn = __phys_to_pfn(PIO_AHB_BASE),
.length = IO_AHB_LENGTH,
.type = MT_DEVICE
}
};
void __init aaec2000_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}
/*
* Interrupt handling routines
*/
static void aaec2000_int_ack(struct irq_data *d)
{
IRQ_INTSR = 1 << d->irq;
}
static void aaec2000_int_mask(struct irq_data *d)
{
IRQ_INTENC |= (1 << d->irq);
}
static void aaec2000_int_unmask(struct irq_data *d)
{
IRQ_INTENS |= (1 << d->irq);
}
static struct irq_chip aaec2000_irq_chip = {
.irq_ack = aaec2000_int_ack,
.irq_mask = aaec2000_int_mask,
.irq_unmask = aaec2000_int_unmask,
};
void __init aaec2000_init_irq(void)
{
unsigned int i;
for (i = 0; i < NR_IRQS; i++) {
set_irq_handler(i, handle_level_irq);
set_irq_chip(i, &aaec2000_irq_chip);
set_irq_flags(i, IRQF_VALID);
}
/* Disable all interrupts */
IRQ_INTENC = 0xffffffff;
/* Clear any pending interrupts */
IRQ_INTSR = IRQ_INTSR;
}
/*
* Time keeping
*/
/* IRQs are disabled before entering here from do_gettimeofday() */
static unsigned long aaec2000_gettimeoffset(void)
{
unsigned long ticks_to_match, elapsed, usec;
/* Get ticks before next timer match */
ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
/* We need elapsed ticks since last match */
elapsed = LATCH - ticks_to_match;
/* Now, convert them to usec */
usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
return usec;
}
/* We enter here with IRQs enabled */
static irqreturn_t
aaec2000_timer_interrupt(int irq, void *dev_id)
{
/* TODO: Check timer accuracy */
timer_tick();
TIMER1_CLEAR = 1;
return IRQ_HANDLED;
}
static struct irqaction aaec2000_timer_irq = {
.name = "AAEC-2000 Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = aaec2000_timer_interrupt,
};
static void __init aaec2000_timer_init(void)
{
/* Disable timer 1 */
TIMER1_CTRL = 0;
/* We have somehow to generate a 100Hz clock.
* We then use the 508KHz timer in periodic mode.
*/
TIMER1_LOAD = LATCH;
TIMER1_CLEAR = 1; /* Clear interrupt */
setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
TIMER1_CTRL = TIMER_CTRL_ENABLE |
TIMER_CTRL_PERIODIC |
TIMER_CTRL_CLKSEL_508K;
}
struct sys_timer aaec2000_timer = {
.init = aaec2000_timer_init,
.offset = aaec2000_gettimeoffset,
};
static struct clcd_panel mach_clcd_panel;
static int aaec2000_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->panel = &mach_clcd_panel;
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = SZ_1M;
return 0;
}
static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_writecombine(&fb->dev->dev, vma,
fb->fb.screen_base,
fb->fb.fix.smem_start,
fb->fb.fix.smem_len);
}
static void aaec2000_clcd_remove(struct clcd_fb *fb)
{
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
static struct clcd_board clcd_plat_data = {
.name = "AAEC-2000",
.check = clcdfb_check,
.decode = clcdfb_decode,
.setup = aaec2000_clcd_setup,
.mmap = aaec2000_clcd_mmap,
.remove = aaec2000_clcd_remove,
};
static struct amba_device clcd_device = {
.dev = {
.init_name = "mb:16",
.coherent_dma_mask = ~0,
.platform_data = &clcd_plat_data,
},
.res = {
.start = AAEC_CLCD_PHYS,
.end = AAEC_CLCD_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = { INT_LCD, NO_IRQ },
.periphid = 0x41110,
};
static struct amba_device *amba_devs[] __initdata = {
&clcd_device,
};
void clk_disable(struct clk *clk)
{
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
return 0;
}
int clk_enable(struct clk *clk)
{
return 0;
}
struct clk *clk_get(struct device *dev, const char *id)
{
return dev && strcmp(dev_name(dev), "mb:16") == 0 ? NULL : ERR_PTR(-ENOENT);
}
void clk_put(struct clk *clk)
{
}
void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
{
clcd_plat_data.enable = clcd->enable;
clcd_plat_data.disable = clcd->disable;
memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
}
static struct flash_platform_data aaec2000_flash_data = {
.map_name = "cfi_probe",
.width = 4,
};
static struct resource aaec2000_flash_resource = {
.start = AAEC_FLASH_BASE,
.end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
.flags = IORESOURCE_MEM,
};
static struct platform_device aaec2000_flash_device = {
.name = "armflash",
.id = 0,
.dev = {
.platform_data = &aaec2000_flash_data,
},
.num_resources = 1,
.resource = &aaec2000_flash_resource,
};
static int __init aaec2000_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
platform_device_register(&aaec2000_flash_device);
return 0;
};
arch_initcall(aaec2000_init);

View File

@ -1,28 +0,0 @@
/*
* linux/arch/arm/mach-aaec2000/core.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
struct sys_timer;
extern struct sys_timer aaec2000_timer;
extern void __init aaec2000_map_io(void);
extern void __init aaec2000_init_irq(void);
struct aaec2000_clcd_info {
struct clcd_panel panel;
void (*disable)(struct clcd_fb *);
void (*enable)(struct clcd_fb *);
};
extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);

View File

@ -1,207 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/aaec2000.h
*
* AAEC-2000 registers definition
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_AAEC2000_H
#define __ASM_ARCH_AAEC2000_H
#ifndef __ASM_ARCH_HARDWARE_H
#error You must include hardware.h not this file
#endif /* __ASM_ARCH_HARDWARE_H */
/* Chip selects */
#define AAEC_CS0 0x00000000
#define AAEC_CS1 0x10000000
#define AAEC_CS2 0x20000000
#define AAEC_CS3 0x30000000
/* Flash */
#define AAEC_FLASH_BASE AAEC_CS0
#define AAEC_FLASH_SIZE SZ_64M
/* Interrupt controller */
#define IRQ_BASE __REG(0x80000500)
#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */
/* UART 1 */
#define UART1_BASE __REG(0x80000600)
#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
#define UART1_LCR __REG(0x80000604) /* Link Control Register */
#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
#define UART1_CR __REG(0x8000060c) /* Control Register */
#define UART1_SR __REG(0x80000610) /* Status Register */
#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */
/* UART 2 */
#define UART2_BASE __REG(0x80000700)
#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
#define UART2_LCR __REG(0x80000704) /* Link Control Register */
#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
#define UART2_CR __REG(0x8000070c) /* Control Register */
#define UART2_SR __REG(0x80000710) /* Status Register */
#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */
/* UART 3 */
#define UART3_BASE __REG(0x80000800)
#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
#define UART3_LCR __REG(0x80000804) /* Link Control Register */
#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
#define UART3_CR __REG(0x8000080c) /* Control Register */
#define UART3_SR __REG(0x80000810) /* Status Register */
#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */
/* These are used in some places */
#define _UART1_BASE __PREG(UART1_BASE)
#define _UART2_BASE __PREG(UART2_BASE)
#define _UART3_BASE __PREG(UART3_BASE)
/* UART Registers Offsets */
#define UART_DR 0x00
#define UART_LCR 0x04
#define UART_BRCR 0x08
#define UART_CR 0x0c
#define UART_SR 0x10
#define UART_INT 0x14
#define UART_INTM 0x18
#define UART_INTRES 0x1c
/* UART_LCR Bitmask */
#define UART_LCR_BRK (1 << 0) /* Send Break */
#define UART_LCR_PEN (1 << 1) /* Parity Enable */
#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */
/* UART_CR Bitmask */
#define UART_CR_EN (1 << 0) /* UART Enable */
#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
#define UART_CR_LOOP (1 << 6) /* Loopback Mode */
/* UART_SR Bitmask */
#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */
/* UART_INT Bitmask */
#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */
/* Timer 1 */
#define TIMER1_BASE __REG(0x80000c00)
#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */
/* Timer 2 */
#define TIMER2_BASE __REG(0x80000d00)
#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */
/* Timer 3 */
#define TIMER3_BASE __REG(0x80000e00)
#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */
/* Timer Control register bits */
#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */
#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
/* Power and State Control */
#define POWER_BASE __REG(0x80000400)
#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
/* GPIO Registers */
#define AAEC_GPIO_PHYS 0x80000e00
#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)
#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)
/* LCD Controller */
#define AAEC_CLCD_PHYS 0x80003000
#endif /* __ARM_ARCH_AAEC2000_H */

View File

@ -1,40 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/aaed2000.h
*
* AAED-2000 specific bits definition
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_AAED2000_H
#define __ASM_ARCH_AAED2000_H
/* External GPIOs. */
#define EXT_GPIO_PBASE AAEC_CS3
#define EXT_GPIO_VBASE 0xf8100000
#define EXT_GPIO_LENGTH 0x00001000
#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x)))
#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x)))
#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE)
#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */
#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */
#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */
#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */
#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */
#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */
#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */
#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */
#endif /* __ARM_ARCH_AAED2000_H */

View File

@ -1,35 +0,0 @@
/* arch/arm/mach-aaec2000/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "hardware.h"
.macro addruart, rp, rv
mov \rp, 0x00000800
orr \rv, \rp, #io_p2v(0x80000000) @ virtual
orr \rp, \rp, #0x80000000 @ physical
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0]
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #0x10]
tst \rd, #(1 << 7)
beq 1002b
.endm
.macro waituart,rd,rx
#if 0
1001: ldr \rd, [\rx, #0x10]
tst \rd, #(1 << 5)
beq 1001b
#endif
.endm

View File

@ -1,40 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/entry-macro.S
*
* Low-level IRQ helper for aaec-2000 based platforms
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov r4, #0xf8000000
add r4, r4, #0x00000500
mov \base, r4
ldr \irqstat, [\base, #0]
cmp \irqstat, #0
bne 1001f
ldr \irqnr, =NR_IRQS+1
b 1003f
1001: mov \irqnr, #0
1002: ands \tmp, \irqstat, #1
mov \irqstat, \irqstat, LSR #1
add \irqnr, \irqnr, #1
beq 1002b
sub \irqnr, \irqnr, #1
1003:
.endm

View File

@ -1,50 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/hardware.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
#include <mach/aaec2000.h>
/* The kernel is loaded at physical address 0xf8000000.
* We map the IO space a bit after
*/
#define PIO_APB_BASE 0x80000000
#define VIO_APB_BASE 0xf8000000
#define IO_APB_LENGTH 0x2000
#define PIO_AHB_BASE 0x80002000
#define VIO_AHB_BASE 0xf8002000
#define IO_AHB_LENGTH 0x2000
#define VIO_BASE VIO_APB_BASE
#define PIO_BASE PIO_APB_BASE
#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
#ifndef __ASSEMBLY__
#include <asm/types.h>
/* FIXME: Is it needed to optimize this a la pxa ?? */
#define __REG(x) (*((volatile u32 *)io_p2v(x)))
#define __PREG(x) (io_v2p((u32)&(x)))
#else /* __ASSEMBLY__ */
#define __REG(x) io_p2v(x)
#define __PREG(x) io_v2p(x)
#endif
#include "aaec2000.h"
#endif /* __ASM_ARCH_HARDWARE_H */

View File

@ -1,18 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/io.h
*
* Copied from asm/arch/sa1100/io.h
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif

View File

@ -1,46 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/irqs.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */
#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */
#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */
#define INT_MV_FIQ 3 /* Media Changed Interrupt */
#define INT_SC 4 /* Sound Codec Interrupt */
#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */
#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */
#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */
#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */
#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */
#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */
#define INT_TICK 11 /* 64Hz Tick Interrupt */
#define INT_UART1 12 /* UART1 Interrupt */
#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */
#define INT_LCD 14 /* LCD Interrupt */
#define INT_SSI 15 /* SSI End of Transfer Interrupt */
#define INT_UART3 16 /* UART3 Interrupt */
#define INT_SCI 17 /* SCI Interrupt */
#define INT_AAC 18 /* Advanced Audio Codec Interrupt */
#define INT_MMC 19 /* MMC Interrupt */
#define INT_USB 20 /* USB Interrupt */
#define INT_DMA 21 /* DMA Interrupt */
#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */
#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */
#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */
#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */
#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */
#define INT_BMI 27 /* BMI Interrupt */
#define NR_IRQS (INT_BMI + 1)
#endif /* __ASM_ARCH_IRQS_H */

View File

@ -1,17 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/memory.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0xf0000000)
#endif /* __ASM_ARCH_MEMORY_H */

View File

@ -1,24 +0,0 @@
/*
* arch/arm/mach-aaed2000/include/mach/system.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
#endif /* __ASM_ARCH_SYSTEM_H */

View File

@ -1,18 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/timex.h
*
* AAEC-2000 Architecture timex specification
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
#define CLOCK_TICK_RATE 508000
#endif /* __ASM_ARCH_TIMEX_H */

View File

@ -1,46 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/uncompress.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include "hardware.h"
#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
static void putc(int c)
{
unsigned long serial_port;
do {
serial_port = _UART3_BASE;
if (UART(UART_CR) & UART_CR_EN) break;
serial_port = _UART1_BASE;
if (UART(UART_CR) & UART_CR_EN) break;
serial_port = _UART2_BASE;
if (UART(UART_CR) & UART_CR_EN) break;
return;
} while (0);
/* wait for space in the UART's transmitter */
while ((UART(UART_SR) & UART_SR_TxFF))
barrier();
/* send the character out. */
UART(UART_DR) = c;
}
static inline void flush(void)
{
}
#define arch_decomp_setup()
#define arch_decomp_wdog()
#endif /* __ASM_ARCH_UNCOMPRESS_H */

View File

@ -1,16 +0,0 @@
/*
* arch/arm/mach-aaec2000/include/mach/vmalloc.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
#define VMALLOC_END 0xd0000000UL
#endif /* __ASM_ARCH_VMALLOC_H */