[ALSA] emu10k1: Add support for Audigy4 (not Pro)

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
This commit is contained in:
James Courtier-Dutton 2006-04-09 17:36:39 +01:00 committed by Jaroslav Kysela
parent 6129daaa0d
commit 21fdddea8e
6 changed files with 107 additions and 21 deletions

View File

@ -245,6 +245,7 @@
#define A_IOCFG_GPOUT0 0x0044 /* analog/digital */
#define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */
#define A_IOCFG_ENABLE_DIGITAL 0x0004
#define A_IOCFG_ENABLE_DIGITAL_AUDIGY4 0x0080
#define A_IOCFG_UNKNOWN_20 0x0020
#define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */
#define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */
@ -1065,6 +1066,7 @@ struct snd_emu_chip_details {
unsigned char emu1212m; /* EMU 1212m card */
unsigned char spi_dac; /* SPI interface for DAC */
unsigned char i2c_adc; /* I2C interface for ADC */
unsigned char adc_1361t; /* Use Philips 1361T ADC */
const char *driver;
const char *name;
const char *id; /* for backward compatibility - can be NULL if not needed */

View File

@ -563,7 +563,7 @@ AC97_SINGLE("PC Speaker Playback Volume", AC97_PC_BEEP, 1, 15, 1)
};
static const struct snd_kcontrol_new snd_ac97_controls_mic_boost =
AC97_SINGLE("Mic Boost (+20dB)", AC97_MIC, 6, 1, 0);
AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_MIC, 6, 1, 0);
static const char* std_rec_sel[] = {"Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone"};
@ -605,7 +605,7 @@ AC97_SINGLE("Simulated Stereo Enhancement", AC97_GENERAL_PURPOSE, 14, 1, 0),
AC97_SINGLE("3D Control - Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
AC97_SINGLE("Loudness (bass boost)", AC97_GENERAL_PURPOSE, 12, 1, 0),
AC97_ENUM("Mono Output Select", std_enum[2]),
AC97_ENUM("Mic Select", std_enum[3]),
AC97_ENUM("Mic Select Capture Switch", std_enum[3]),
AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0)
};

View File

@ -563,7 +563,7 @@ AC97_SINGLE("Mic 1 to Phone Switch", AC97_MIC, 14, 1, 1),
AC97_SINGLE("Mic 2 to Phone Switch", AC97_MIC, 13, 1, 1),
AC97_ENUM("Mic Select Source", wm9711_enum[7]),
AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 32, 1),
AC97_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0),
AC97_SINGLE("Mic 20dB Boost Capture Switch", AC97_MIC, 7, 1, 0),
AC97_SINGLE("Master ZC Switch", AC97_MASTER, 7, 1, 0),
AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0),
@ -653,7 +653,7 @@ AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1),
AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1),
AC97_SINGLE("Mic 1 to Mono Switch", AC97_LINE, 7, 1, 1),
AC97_SINGLE("Mic 2 to Mono Switch", AC97_LINE, 6, 1, 1),
AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0),
AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_LINE, 5, 1, 0),
AC97_ENUM("Mic to Headphone Mux", wm9713_enum[0]),
AC97_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1),

View File

@ -777,14 +777,6 @@ static int snd_emu10k1_dev_free(struct snd_device *device)
static struct snd_emu_chip_details emu_chip_details[] = {
/* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
/* Audigy4 SB0400 */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
.driver = "Audigy2", .name = "Audigy 4 [SB0400]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.ac97_chip = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
/* DSP: CA0108-IAT
* DAC: CS4382-KQ
@ -799,13 +791,59 @@ static struct snd_emu_chip_details emu_chip_details[] = {
.ca0108_chip = 1,
.spk71 = 1,
.ac97_chip = 1} ,
/* Audigy4 (Not PRO) SB0610 */
/* Tested by James@superbug.co.uk 4th April 2006 */
/* A_IOCFG bits
* Output
* 0: ?
* 1: ?
* 2: ?
* 3: 0 - Digital Out, 1 - Line in
* 4: ?
* 5: ?
* 6: ?
* 7: ?
* Input
* 8: ?
* 9: ?
* A: Green jack sense (Front)
* B: ?
* C: Black jack sense (Rear/Side Right)
* D: Yellow jack sense (Center/LFE/Side Left)
* E: ?
* F: ?
*
* Digital Out/Line in switch using A_IOCFG bit 3 (0x08)
* 0 - Digital Out
* 1 - Line in
*/
/* Mic input not tested.
* Analog CD input not tested
* Digital Out not tested.
* Line in working.
* Audio output 5.1 working. Side outputs not working.
*/
/* DSP: CA10300-IAT LF
* DAC: Cirrus Logic CS4382-KQZ
* ADC: Philips 1361T
* AC97: Sigmatel STAC9750
* CA0151: None
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
.driver = "Audigy2", .name = "Audigy 4 [SB0610]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit */
.ac97_chip = 1} ,
/* Audigy 2 ZS Notebook Cardbus card.*/
/* Tested by James@superbug.co.uk 22th December 2005 */
/* Audio output 7.1/Headphones working.
* Digital output working. (AC3 not checked, only PCM)
* Audio inputs not tested.
*/
/* DSP: Tiny2
/* DSP: Tina2
* DAC: Wolfson WM8768/WM8568
* ADC: Wolfson WM8775
* AC97: None

View File

@ -777,6 +777,8 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
};
static char *audigy_remove_ctls[] = {
/* Master/PCM controls on ac97 of Audigy has no effect */
/* On the Audigy2 the AC97 playback is piped into
* the Philips ADC for 24bit capture */
"PCM Playback Switch",
"PCM Playback Volume",
"Master Mono Playback Switch",
@ -804,6 +806,47 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
"AMic Playback Volume", "Mic Playback Volume",
NULL
};
static char *audigy_remove_ctls_1361t_adc[] = {
/* On the Audigy2 the AC97 playback is piped into
* the Philips ADC for 24bit capture */
"PCM Playback Switch",
"PCM Playback Volume",
"Master Mono Playback Switch",
"Master Mono Playback Volume",
"Capture Source",
"Capture Switch",
"Capture Volume",
"Mic Capture Volume",
"Headphone Playback Switch",
"Headphone Playback Volume",
"3D Control - Center",
"3D Control - Depth",
"3D Control - Switch",
"Line2 Playback Volume",
"Line2 Capture Volume",
NULL
};
static char *audigy_rename_ctls_1361t_adc[] = {
"Master Playback Switch", "Master Capture Switch",
"Master Playback Volume", "Master Capture Volume",
"Wave Master Playback Volume", "Master Playback Volume",
"PC Speaker Playback Switch", "PC Speaker Capture Switch",
"PC Speaker Playback Volume", "PC Speaker Capture Volume",
"Phone Playback Switch", "Phone Capture Switch",
"Phone Playback Volume", "Phone Capture Volume",
"Mic Playback Switch", "Mic Capture Switch",
"Mic Playback Volume", "Mic Capture Volume",
"Line Playback Switch", "Line Capture Switch",
"Line Playback Volume", "Line Capture Volume",
"CD Playback Switch", "CD Capture Switch",
"CD Playback Volume", "CD Capture Volume",
"Aux Playback Switch", "Aux Capture Switch",
"Aux Playback Volume", "Aux Capture Volume",
"Video Playback Switch", "Video Capture Switch",
"Video Playback Volume", "Video Capture Volume",
NULL
};
if (emu->card_capabilities->ac97_chip) {
struct snd_ac97_bus *pbus;
@ -834,6 +877,9 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
snd_ac97_write_cache(emu->ac97, AC97_MASTER, 0x0000);
/* set capture source to mic */
snd_ac97_write_cache(emu->ac97, AC97_REC_SEL, 0x0000);
if (emu->card_capabilities->adc_1361t)
c = audigy_remove_ctls_1361t_adc;
else
c = audigy_remove_ctls;
} else {
/*
@ -863,11 +909,15 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
}
if (emu->audigy)
if (emu->card_capabilities->adc_1361t)
c = audigy_rename_ctls_1361t_adc;
else
c = audigy_rename_ctls;
else
c = emu10k1_rename_ctls;
for (; *c; c += 2)
rename_ctl(card, c[0], c[1]);
if (emu->card_capabilities->subsystem == 0x20071102) { /* Audigy 4 Pro */
rename_ctl(card, "Line2 Capture Volume", "Line1/Mic Capture Volume");
rename_ctl(card, "Analog Mix Capture Volume", "Line2 Capture Volume");

View File

@ -1,11 +1,7 @@
/*
* Copyright (c) by James Courtier-Dutton <James@superbug.demon.co.uk>
* Driver p16v chips
* Version: 0.21
*
*
* This code was initally based on code from ALSA's emu10k1x.c which is:
* Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
* Driver tina2 chips
* Version: 0.1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by