net/various: remove trailing space in messages

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Frans Pop 2010-03-24 07:57:36 +00:00 committed by David S. Miller
parent d6dbee8613
commit 2381a55c88
24 changed files with 35 additions and 35 deletions

View File

@ -496,7 +496,7 @@ be_test_ddr_dma(struct be_adapter *adapter)
ddrdma_cmd.va = pci_alloc_consistent(adapter->pdev, ddrdma_cmd.size,
&ddrdma_cmd.dma);
if (!ddrdma_cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failure \n");
dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
return -ENOMEM;
}

View File

@ -1749,7 +1749,7 @@ static int be_setup_wol(struct be_adapter *adapter, bool enable)
PCICFG_PM_CONTROL_OFFSET, PCICFG_PM_CONTROL_MASK);
if (status) {
dev_err(&adapter->pdev->dev,
"Could not enable Wake-on-lan \n");
"Could not enable Wake-on-lan\n");
pci_free_consistent(adapter->pdev, cmd.size, cmd.va,
cmd.dma);
return status;

View File

@ -1594,7 +1594,7 @@ static u8 bnx2x_ext_phy_resolve_fc(struct link_params *params,
MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
pause_result |= (lp_pause &
MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n",
pause_result);
bnx2x_pause_resolve(vars, pause_result);
if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE &&
@ -1616,7 +1616,7 @@ static u8 bnx2x_ext_phy_resolve_fc(struct link_params *params,
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
bnx2x_pause_resolve(vars, pause_result);
DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n",
pause_result);
}
}
@ -1974,7 +1974,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
}
}
DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x \n",
DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x\n",
gp_status, vars->phy_link_up, vars->line_speed);
DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x"
" autoneg 0x%x\n",
@ -3852,7 +3852,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
SPEED_AUTO_NEG) &&
((params->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
DP(NETIF_MSG_LINK, "Setting 1G clause37 \n");
DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
bnx2x_cl45_write(bp, params->port, ext_phy_type,
ext_phy_addr, MDIO_AN_DEVAD,
MDIO_AN_REG_ADV, 0x20);
@ -4234,14 +4234,14 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_10G_CTRL2, &tmp1);
DP(NETIF_MSG_LINK, "1.7 = 0x%x \n", tmp1);
DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);
} else if ((params->req_line_speed ==
SPEED_AUTO_NEG) &&
((params->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
DP(NETIF_MSG_LINK, "Setting 1G clause37 \n");
DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
bnx2x_cl45_write(bp, params->port, ext_phy_type,
ext_phy_addr, MDIO_AN_DEVAD,
MDIO_PMA_REG_8727_MISC_CTRL, 0);

View File

@ -4667,13 +4667,13 @@ static int bond_check_params(struct bond_params *params)
}
if (num_grat_arp < 0 || num_grat_arp > 255) {
pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1 \n",
pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1\n",
num_grat_arp);
num_grat_arp = 1;
}
if (num_unsol_na < 0 || num_unsol_na > 255) {
pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1 \n",
pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
num_unsol_na);
num_unsol_na = 1;
}

View File

@ -918,7 +918,7 @@ static int __devinit dnet_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "Dave DNET at 0x%p (0x%08x) irq %d %pM\n",
bp->regs, mem_base, dev->irq, dev->dev_addr);
dev_info(&pdev->dev, "has %smdio, %sirq, %sgigabit, %sdma \n",
dev_info(&pdev->dev, "has %smdio, %sirq, %sgigabit, %sdma\n",
(bp->capabilities & DNET_HAS_MDIO) ? "" : "no ",
(bp->capabilities & DNET_HAS_IRQ) ? "" : "no ",
(bp->capabilities & DNET_HAS_GIGABIT) ? "" : "no ",

View File

@ -429,7 +429,7 @@ static int ser12_open(struct net_device *dev)
return -EINVAL;
}
if (!request_region(dev->base_addr, SER12_EXTENT, "baycom_ser_fdx")) {
printk(KERN_WARNING "BAYCOM_SER_FSX: I/O port 0x%04lx busy \n",
printk(KERN_WARNING "BAYCOM_SER_FSX: I/O port 0x%04lx busy\n",
dev->base_addr);
return -EACCES;
}

View File

@ -503,7 +503,7 @@ static void mlx4_en_do_get_stats(struct work_struct *work)
err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0);
if (err)
en_dbg(HW, priv, "Could not update stats \n");
en_dbg(HW, priv, "Could not update stats\n");
mutex_lock(&mdev->state_lock);
if (mdev->device_up) {

View File

@ -2258,7 +2258,7 @@ static int ql_tx_rx_clean(struct ql3_adapter *qdev,
"%x.\n",
ndev->name, net_rsp->opcode);
printk(KERN_ERR PFX
"0x%08lx 0x%08lx 0x%08lx 0x%08lx \n",
"0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",
(unsigned long int)tmp[0],
(unsigned long int)tmp[1],
(unsigned long int)tmp[2],

View File

@ -1338,7 +1338,7 @@ void ql_mpi_core_to_log(struct work_struct *work)
for (i = 0; i < count; i += 8) {
printk(KERN_ERR "%.08x: %.08x %.08x %.08x %.08x %.08x "
"%.08x %.08x %.08x \n", i,
"%.08x %.08x %.08x\n", i,
tmp[i + 0],
tmp[i + 1],
tmp[i + 2],
@ -2056,7 +2056,7 @@ void ql_dump_ob_mac_iocb(struct ob_mac_iocb_req *ob_mac_iocb)
ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_LSO ? "LSO" : "",
ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_UC ? "UC" : "",
ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_TC ? "TC" : "");
printk(KERN_ERR PFX "flags3 = %s %s %s \n",
printk(KERN_ERR PFX "flags3 = %s %s %s\n",
ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_IC ? "IC" : "",
ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_DFP ? "DFP" : "",
ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_V ? "V" : "");

View File

@ -1499,7 +1499,7 @@ static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex
}
if(netif_msg_link(sis_priv))
printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
printk(KERN_INFO "%s: Media Link On %s %s-duplex\n",
net_dev->name,
*speed == HW_SPEED_100_MBPS ?
"100mbps" : "10mbps",
@ -1523,7 +1523,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
int i;
if(netif_msg_tx_err(sis_priv))
printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n",
net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
/* Disable interrupts by clearing the interrupt mask. */

View File

@ -1352,7 +1352,7 @@ void rtm_set_timer(struct s_smc *smc)
/*
* MIB timer and hardware timer have the same resolution of 80nS
*/
DB_RMT("RMT: setting new fddiPATHT_Rmode, t = %d ns \n",
DB_RMT("RMT: setting new fddiPATHT_Rmode, t = %d ns\n",
(int) smc->mib.a[PATH0].fddiPATHT_Rmode,0) ;
outpd(ADDR(B2_RTM_INI),smc->mib.a[PATH0].fddiPATHT_Rmode) ;
}

View File

@ -1277,7 +1277,7 @@ static void pc_rcode_actions(struct s_smc *smc, int bit, struct s_phy *phy)
mib = phy->mib ;
DB_PCMN(1,"SIG rec %x %x: \n", bit,phy->r_val[bit] ) ;
DB_PCMN(1,"SIG rec %x %x:\n", bit,phy->r_val[bit] ) ;
bit++ ;
switch(bit) {
@ -1580,7 +1580,7 @@ static void pc_tcode_actions(struct s_smc *smc, const int bit, struct s_phy *phy
mib->fddiPORTMacIndicated.T_val = phy->t_val[9] ;
break ;
}
DB_PCMN(1,"SIG snd %x %x: \n", bit,phy->t_val[bit] ) ;
DB_PCMN(1,"SIG snd %x %x:\n", bit,phy->t_val[bit] ) ;
}
/*

View File

@ -414,7 +414,7 @@ static void smt_send_srf(struct s_smc *smc)
smt->smt_len = SMT_MAX_INFO_LEN - pcon.pc_len ;
mb->sm_len = smt->smt_len + sizeof(struct smt_header) ;
DB_SMT("SRF: sending SRF at %x, len %d \n",smt,mb->sm_len) ;
DB_SMT("SRF: sending SRF at %x, len %d\n",smt,mb->sm_len) ;
DB_SMT("SRF: state SR%d Threshold %d\n",
smc->srf.sr_state,smc->srf.SRThreshold/TICKS_PER_SECOND) ;
#ifdef DEBUG

View File

@ -3666,7 +3666,7 @@ static int skge_debug_show(struct seq_file *seq, void *v)
t->csum_offs, t->csum_write, t->csum_start);
}
seq_printf(seq, "\nRx Ring: \n");
seq_printf(seq, "\nRx Ring:\n");
for (e = skge->rx_ring.to_clean; ; e = e->next) {
const struct skge_rx_desc *r = e->desc;

View File

@ -138,7 +138,7 @@ static void dwmac100_dump_dma_regs(unsigned long ioaddr)
{
int i;
DBG(KERN_DEBUG "DWMAC 100 DMA CSR \n");
DBG(KERN_DEBUG "DWMAC 100 DMA CSR\n");
for (i = 0; i < 9; i++)
pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
(DMA_BUS_MODE + i * 4),

View File

@ -836,7 +836,7 @@ static int stmmac_open(struct net_device *dev)
#ifdef CONFIG_STMMAC_TIMER
priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
if (unlikely(priv->tm == NULL)) {
pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
pr_err("%s: ERROR: timer memory alloc failed\n", __func__);
return -ENOMEM;
}
priv->tm->freq = tmrate;

View File

@ -2464,7 +2464,7 @@ static void TLan_PhyPrint( struct net_device *dev )
printk( "TLAN: Device %s, Unmanaged PHY.\n", dev->name );
} else if ( phy <= TLAN_PHY_MAX_ADDR ) {
printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
printk( "TLAN: Off. +0 +1 +2 +3 \n" );
printk( "TLAN: Off. +0 +1 +2 +3\n" );
for ( i = 0; i < 0x20; i+= 4 ) {
printk( "TLAN: 0x%02x", i );
TLan_MiiReadReg( dev, phy, i, &data0 );

View File

@ -263,7 +263,7 @@ static inline void tsi108_write_tbi(struct tsi108_prv_data *data,
return;
udelay(10);
}
printk(KERN_ERR "%s function time out \n", __func__);
printk(KERN_ERR "%s function time out\n", __func__);
}
static int mii_speed(struct mii_if_info *mii)
@ -1056,7 +1056,7 @@ static void tsi108_stop_ethernet(struct net_device *dev)
return;
udelay(10);
}
printk(KERN_ERR "%s function time out \n", __func__);
printk(KERN_ERR "%s function time out\n", __func__);
}
static void tsi108_reset_ether(struct tsi108_prv_data * data)
@ -1233,7 +1233,7 @@ static void tsi108_init_phy(struct net_device *dev)
udelay(10);
}
if (i == 0)
printk(KERN_ERR "%s function time out \n", __func__);
printk(KERN_ERR "%s function time out\n", __func__);
if (data->phy_type == TSI108_PHY_BCM54XX) {
tsi108_write_mii(data, 0x09, 0x0300);

View File

@ -3883,7 +3883,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
}
if (netif_msg_probe(&debug))
printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d) \n",
printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d)\n",
ug_info->uf_info.ucc_num + 1, ug_info->uf_info.regs,
ug_info->uf_info.irq);

View File

@ -4174,7 +4174,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
ret = pci_enable_sriov(pdev, max_config_dev - 1);
if (ret)
vxge_debug_ll_config(VXGE_ERR,
"Failed to enable SRIOV: %d \n", ret);
"Failed to enable SRIOV: %d\n", ret);
}
/*

View File

@ -395,7 +395,7 @@ static void tx1_dma_buf_check(pc300_t * card, int ch)
u16 next_bd = card->chan[ch].tx_next_bd;
u32 scabase = card->hw.scabase;
printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd);
printk ("\nnfree_tx_bd = %d\n", card->chan[ch].nfree_tx_bd);
printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch,
first_bd, TX_BD_ADDR(ch, first_bd),
next_bd, TX_BD_ADDR(ch, next_bd));

View File

@ -366,7 +366,7 @@ static void cpc_tty_close(struct tty_struct *tty, struct file *flip)
int res;
if (!tty || !tty->driver_data ) {
CPC_TTY_DBG("hdlx-tty: no TTY in close \n");
CPC_TTY_DBG("hdlx-tty: no TTY in close\n");
return;
}

View File

@ -1352,7 +1352,7 @@ static int sdla_set_config(struct net_device *dev, struct ifmap *map)
return(-EINVAL);
if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
printk(KERN_WARNING "SDLA: io-port 0x%04lx in use \n", dev->base_addr);
printk(KERN_WARNING "SDLA: io-port 0x%04lx in use\n", dev->base_addr);
return(-EINVAL);
}
base = map->base_addr;

View File

@ -688,7 +688,7 @@ try_new:
pl_type, buf_len);
tx_msg->num_pls = le16_to_cpu(num_pls+1);
tx_msg->size += padded_len;
d_printf(2, dev, "TX: appended %zu b (up to %u b) pl #%u \n",
d_printf(2, dev, "TX: appended %zu b (up to %u b) pl #%u\n",
padded_len, tx_msg->size, num_pls+1);
d_printf(2, dev,
"TX: appended hdr @%zu %zu b pl #%u @%zu %zu/%zu b\n",