diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index b9f34e492a24..f2c621b55f49 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -15,6 +15,7 @@
 #include <linux/bitfield.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -151,6 +152,7 @@ static const struct pmc_reg_map spt_reg_map = {
 	.pm_cfg_offset = SPT_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = SPT_PMC_READ_DISABLE_BIT,
 	.ltr_ignore_max = SPT_NUM_IP_IGN_ALLOWED,
+	.pm_vric1_offset = SPT_PMC_VRIC1_OFFSET,
 };
 
 /* Cannonlake: PGD PFET Enable Ack Status Register(s) bitmap */
@@ -821,6 +823,37 @@ static const struct pci_device_id pmc_pci_ids[] = {
 	{ 0, },
 };
 
+/*
+ * This quirk can be used on those platforms where
+ * the platform BIOS enforces 24Mhx Crystal to shutdown
+ * before PMC can assert SLP_S0#.
+ */
+int quirk_xtal_ignore(const struct dmi_system_id *id)
+{
+	struct pmc_dev *pmcdev = &pmc;
+	u32 value;
+
+	value = pmc_core_reg_read(pmcdev, pmcdev->map->pm_vric1_offset);
+	/* 24MHz Crystal Shutdown Qualification Disable */
+	value |= SPT_PMC_VRIC1_XTALSDQDIS;
+	/* Low Voltage Mode Enable */
+	value &= ~SPT_PMC_VRIC1_SLPS0LVEN;
+	pmc_core_reg_write(pmcdev, pmcdev->map->pm_vric1_offset, value);
+	return 0;
+}
+
+static const struct dmi_system_id pmc_core_dmi_table[]  = {
+	{
+	.callback = quirk_xtal_ignore,
+	.ident = "HP Elite x2 1013 G3",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Elite x2 1013 G3"),
+		},
+	},
+	{}
+};
+
 static int __init pmc_core_probe(void)
 {
 	struct pmc_dev *pmcdev = &pmc;
@@ -862,6 +895,7 @@ static int __init pmc_core_probe(void)
 		return err;
 	}
 
+	dmi_check_system(pmc_core_dmi_table);
 	pr_info(" initialized\n");
 	return 0;
 }
diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel_pmc_core.h
index 6f1b64808075..88d9c0653a5f 100644
--- a/drivers/platform/x86/intel_pmc_core.h
+++ b/drivers/platform/x86/intel_pmc_core.h
@@ -25,6 +25,7 @@
 #define SPT_PMC_MTPMC_OFFSET			0x20
 #define SPT_PMC_MFPMC_OFFSET			0x38
 #define SPT_PMC_LTR_IGNORE_OFFSET		0x30C
+#define SPT_PMC_VRIC1_OFFSET			0x31c
 #define SPT_PMC_MPHY_CORE_STS_0			0x1143
 #define SPT_PMC_MPHY_CORE_STS_1			0x1142
 #define SPT_PMC_MPHY_COM_STS_0			0x1155
@@ -136,6 +137,9 @@ enum ppfear_regs {
 #define SPT_PMC_BIT_MPHY_CMN_LANE2		BIT(2)
 #define SPT_PMC_BIT_MPHY_CMN_LANE3		BIT(3)
 
+#define SPT_PMC_VRIC1_SLPS0LVEN			BIT(13)
+#define SPT_PMC_VRIC1_XTALSDQDIS		BIT(22)
+
 /* Cannonlake Power Management Controller register offsets */
 #define CNP_PMC_SLPS0_DBG_OFFSET		0x10B4
 #define CNP_PMC_PM_CFG_OFFSET			0x1818
@@ -224,6 +228,7 @@ struct pmc_reg_map {
 	const int pm_read_disable_bit;
 	const u32 slps0_dbg_offset;
 	const u32 ltr_ignore_max;
+	const u32 pm_vric1_offset;
 };
 
 /**