Staging: udlfb: Rework startup and teardown to fix race conditions

Rework probe to use refcounts and std functions

Because the different parts of the driver (usb, fbdev) tear down
in different orders, the driver previously could crash accessing
data that had already been freed.  Refcounting system used to handle.

Reworked probe to make use of refcounts, set mode using std fbops,
and set up sysfs and pre-allocated urbs.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Bernie Thompson 2010-02-15 06:46:13 -08:00 committed by Greg Kroah-Hartman
parent 7d9485e2c5
commit 2469d5dbca
2 changed files with 200 additions and 111 deletions

View File

@ -3,6 +3,7 @@
*
* Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it>
* Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com>
* Copyright (C) 2009 Bernie Thompson <bernie@plugable.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License v2. See the file COPYING in the main directory of this archive for
@ -27,10 +28,8 @@
#include "udlfb.h"
#define DRIVER_VERSION "DisplayLink Framebuffer Driver 0.4.1"
static struct fb_fix_screeninfo dlfb_fix = {
.id = "displaylinkfb",
.id = "udlfb",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_TRUECOLOR,
.xpanstep = 0,
@ -39,6 +38,13 @@ static struct fb_fix_screeninfo dlfb_fix = {
.accel = FB_ACCEL_NONE,
};
static const u32 udlfb_info_flags = FBINFO_DEFAULT | FBINFO_READS_FAST |
#ifdef FBINFO_VIRTFB
FBINFO_VIRTFB |
#endif
FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_FILLRECT |
FBINFO_HWACCEL_COPYAREA | FBINFO_MISC_ALWAYS_SETPAR;
/*
* There are many DisplayLink-based products, all with unique PIDs. We are able
* to support all volume ones (circa 2009) with a single driver, so we match
@ -939,6 +945,29 @@ static void dlfb_delete(struct kref *kref)
kfree(dev);
}
/*
* Called by fbdev as last part of unregister_framebuffer() process
* No new clients can open connections. Deallocate everything fb_info.
*/
static void dlfb_ops_destroy(struct fb_info *info)
{
struct dlfb_data *dev = info->par;
if (info->cmap.len != 0)
fb_dealloc_cmap(&info->cmap);
if (info->monspecs.modedb)
fb_destroy_modedb(info->monspecs.modedb);
if (info->screen_base)
vfree(info->screen_base);
fb_destroy_modelist(&info->modelist);
framebuffer_release(info);
/* ref taken before register_framebuffer() for dlfb_data clients */
kref_put(&dev->kref, dlfb_delete);
}
/*
* Check whether a video mode is supported by the DisplayLink chip
* We start from monitor's modes, so don't need to filter that here
@ -966,6 +995,35 @@ static void dlfb_var_color_format(struct fb_var_screeninfo *var)
var->blue = blue;
}
static int dlfb_ops_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct fb_videomode mode;
/* TODO: support dynamically changing framebuffer size */
if ((var->xres * var->yres * 2) > info->fix.smem_len)
return -EINVAL;
/* set device-specific elements of var unrelated to mode */
dlfb_var_color_format(var);
fb_var_to_videomode(&mode, var);
if (!dlfb_is_valid_mode(&mode, info))
return -EINVAL;
return 0;
}
static int dlfb_ops_set_par(struct fb_info *info)
{
struct dlfb_data *dev = info->par;
dl_notice("set_par mode %dx%d\n", info->var.xres, info->var.yres);
return dlfb_set_video_mode(dev, &info->var);
}
static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
{
struct dlfb_data *dev_info = info->par;
@ -985,6 +1043,7 @@ static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
}
static struct fb_ops dlfb_ops = {
.owner = THIS_MODULE,
.fb_setcolreg = dlfb_ops_setcolreg,
.fb_fillrect = dlfb_ops_fillrect,
.fb_copyarea = dlfb_ops_copyarea,
@ -993,6 +1052,8 @@ static struct fb_ops dlfb_ops = {
.fb_ioctl = dlfb_ops_ioctl,
.fb_release = dlfb_ops_release,
.fb_blank = dlfb_ops_blank,
.fb_check_var = dlfb_ops_check_var,
.fb_set_par = dlfb_ops_set_par,
};
/*
@ -1222,37 +1283,48 @@ static int dlfb_select_std_channel(struct dlfb_data *dev)
return ret;
}
static int dlfb_probe(struct usb_interface *interface,
static int dlfb_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct device *mydev;
struct usb_device *usbdev;
struct dlfb_data *dev;
struct fb_info *info;
int videomemorysize;
int i;
unsigned char *videomemory;
int retval = -ENOMEM;
struct fb_var_screeninfo *var;
struct fb_bitfield red = { 11, 5, 0 };
struct fb_bitfield green = { 5, 6, 0 };
struct fb_bitfield blue = { 0, 5, 0 };
int registered = 0;
u16 *pix_framebuffer;
usbdev = usb_get_dev(interface_to_usbdev(interface));
mydev = &usbdev->dev;
/* usb initialization */
usbdev = interface_to_usbdev(interface);
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
dev_err(mydev, "failed alloc of dev struct\n");
goto err_devalloc;
err("dlfb_usb_probe: failed alloc of dev struct\n");
goto error;
}
/* we need to wait for both usb and fbdev to spin down on disconnect */
kref_init(&dev->kref); /* matching kref_put in usb .disconnect fn */
kref_get(&dev->kref); /* matching kref_put in .fb_destroy function*/
mutex_init(&dev->bulk_mutex);
dev->udev = usbdev;
dev->gdev = &usbdev->dev; /* our generic struct device * */
dev->interface = interface;
usb_set_intfdata(interface, dev);
dev_info(mydev, "dlfb_probe: setting up DisplayLink device\n");
if (!dlfb_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
retval = -ENOMEM;
dl_err("dlfb_alloc_urb_list failed\n");
goto error;
}
mutex_init(&dev->fb_open_lock);
/*
* TODO: replace single 64K buffer with buffer list
@ -1260,8 +1332,8 @@ static int dlfb_probe(struct usb_interface *interface,
*/
dev->buf = kmalloc(BUF_SIZE, GFP_KERNEL);
if (dev->buf == NULL) {
dev_err(mydev, "unable to allocate memory for dlfb commands\n");
goto err_usballoc;
dl_err("unable to allocate memory for dlfb commands\n");
goto error;
}
dev->bufend = dev->buf + BUF_SIZE;
@ -1270,49 +1342,51 @@ static int dlfb_probe(struct usb_interface *interface,
usb_sndbulkpipe(dev->udev, 1), dev->buf, 0,
dlfb_bulk_callback, dev);
/* allocates framebuffer driver structure, not framebuffer memory */
info = framebuffer_alloc(0, mydev);
if (!info)
goto err_fballoc;
/* We don't register a new USB class. Our client interface is fbdev */
/* allocates framebuffer driver structure, not framebuffer memory */
info = framebuffer_alloc(0, &usbdev->dev);
if (!info) {
retval = -ENOMEM;
dl_err("framebuffer_alloc failed\n");
goto error;
}
dev->info = info;
info->par = dev;
info->pseudo_palette = dev->pseudo_palette;
info->fbops = &dlfb_ops;
var = &info->var;
retval = dlfb_get_var_from_edid(dev, var);
if (retval) {
/* had a problem getting edid. so fallback to 640x480 */
dev_err(mydev, "Problem %d with EDID.\n", retval);
var->xres = 640;
var->yres = 480;
}
/* TODO set limit based on actual SKU detection */
dev->sku_pixel_limit = 2048 * 1152;
INIT_LIST_HEAD(&info->modelist);
dlfb_parse_edid(dev, var, info);
/*
* ok, now that we've got the size info, we can alloc our framebuffer.
* We are using 16bpp.
*/
info->var.bits_per_pixel = 16;
info->fix = dlfb_fix;
info->fix.line_length = var->xres * (var->bits_per_pixel / 8);
videomemorysize = info->fix.line_length * var->yres;
/*
* The big chunk of system memory we use as a virtual framebuffer.
* Pages don't need to be set RESERVED (non-swap) immediately on 2.6
* remap_pfn_page() syscall in our mmap and/or defio will handle.
* TODO: Handle fbcon cursor code calling blit in interrupt context
*/
videomemory = vmalloc(videomemorysize);
if (!videomemory)
goto err_vidmem;
memset(videomemory, 0, videomemorysize);
if (!videomemory) {
retval = -ENOMEM;
dl_err("Virtual framebuffer alloc failed\n");
goto error;
}
info->screen_base = videomemory;
info->fix.smem_len = PAGE_ALIGN(videomemorysize);
info->fix.smem_start = (unsigned long) videomemory;
info->flags =
FBINFO_DEFAULT | FBINFO_READS_FAST | FBINFO_HWACCEL_IMAGEBLIT |
FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
info->flags = udlfb_info_flags;
/*
* Second framebuffer copy, mirroring the state of the framebuffer
@ -1320,109 +1394,121 @@ static int dlfb_probe(struct usb_interface *interface,
* But with imperfect damage info we may end up sending pixels over USB
* that were, in fact, unchanged -- wasting limited USB bandwidth
*/
dev->backing_buffer = vmalloc(dev->screen_size);
dev->backing_buffer = vmalloc(videomemorysize);
if (!dev->backing_buffer)
dev_info(mydev, "No backing buffer allocated!\n");
info->fbops = &dlfb_ops;
var->vmode = FB_VMODE_NONINTERLACED;
var->red = red;
var->green = green;
var->blue = blue;
/*
* TODO: Enable FB_CONFIG_DEFIO support
info->fbdefio = &dlfb_defio;
fb_deferred_io_init(info);
*/
dl_warn("No shadow/backing buffer allcoated\n");
else
memset(dev->backing_buffer, 0, videomemorysize);
retval = fb_alloc_cmap(&info->cmap, 256, 0);
if (retval < 0) {
dev_err(mydev, "Failed to allocate colormap\n");
goto err_cmap;
dl_err("fb_alloc_cmap failed %x\n", retval);
goto error;
}
/* ready to begin using device */
/*
#ifdef CONFIG_FB_DEFERRED_IO
atomic_set(&dev->use_defio, 1);
#endif
*/
atomic_set(&dev->usb_active, 1);
dlfb_select_std_channel(dev);
dlfb_set_video_mode(dev, var);
/* TODO: dlfb_dpy_update(dev); */
dlfb_ops_check_var(var, info);
dlfb_ops_set_par(info);
/* paint greenscreen */
/*
pix_framebuffer = (u16 *) videomemory;
for (i = 0; i < videomemorysize / 2; i++)
pix_framebuffer[i] = 0x37e6;
dlfb_handle_damage(dev, 0, 0, info->var.xres, info->var.yres,
videomemory);
*/
retval = register_framebuffer(info);
if (retval < 0)
goto err_regfb;
if (retval < 0) {
dl_err("register_framebuffer failed %d\n", retval);
goto error;
}
registered = 1;
/* paint "successful" green screen */
draw_rect(dev, 0, 0, dev->info->var.xres,
dev->info->var.yres, 0x30, 0xff, 0x30);
for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
device_create_file(info->dev, &fb_device_attrs[i]);
dev_info(mydev, "DisplayLink USB device %d now attached, "
"using %dK of memory\n", info->node,
((dev->backing_buffer) ?
videomemorysize * 2 : videomemorysize) >> 10);
device_create_bin_file(info->dev, &edid_attr);
dl_err("DisplayLink USB device /dev/fb%d attached. %dx%d resolution."
" Using %dK framebuffer memory\n", info->node,
var->xres, var->yres,
((dev->backing_buffer) ?
videomemorysize * 2 : videomemorysize) >> 10);
return 0;
err_regfb:
fb_dealloc_cmap(&info->cmap);
err_cmap:
/* TODO: fb_deferred_io_cleanup(info); */
vfree(videomemory);
err_vidmem:
framebuffer_release(info);
err_fballoc:
kfree(dev->buf);
err_usballoc:
usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
err_devalloc:
error:
if (dev) {
if (registered) {
unregister_framebuffer(info);
dlfb_ops_destroy(info);
} else
kref_put(&dev->kref, dlfb_delete);
if (dev->urbs.count > 0)
dlfb_free_urb_list(dev);
kref_put(&dev->kref, dlfb_delete); /* last ref from kref_init */
/* dev has been deallocated. Do not dereference */
}
return retval;
}
static void dlfb_disconnect(struct usb_interface *interface)
static void dlfb_usb_disconnect(struct usb_interface *interface)
{
struct dlfb_data *dev;
struct fb_info *info;
int i;
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
/*
* TODO: since, upon usb disconnect(), usb will cancel in-flight urbs
* and error out any new ones, look at eliminating need for mutex
*/
mutex_lock(&dev->bulk_mutex);
dev->interface = NULL;
info = dev->info;
mutex_unlock(&dev->bulk_mutex);
/* when non-active we'll update virtual framebuffer, but no new urbs */
atomic_set(&dev->usb_active, 0);
usb_set_intfdata(interface, NULL);
for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
device_remove_file(info->dev, &fb_device_attrs[i]);
device_remove_bin_file(info->dev, &edid_attr);
/* this function will wait for all in-flight urbs to complete */
dlfb_free_urb_list(dev);
if (info) {
dev_info(&interface->dev, "Detaching DisplayLink device %d.\n",
info->node);
dl_notice("Detaching /dev/fb%d\n", info->node);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
/* TODO: fb_deferred_io_cleanup(info); */
fb_dealloc_cmap(&info->cmap);
vfree((void __force *)info->screen_base);
framebuffer_release(info);
dlfb_ops_destroy(info);
}
if (dev->backing_buffer)
vfree(dev->backing_buffer);
/* release reference taken by kref_init in probe() */
kref_put(&dev->kref, dlfb_delete);
kfree(dev);
/* consider dlfb_data freed */
return;
}
static struct usb_driver dlfb_driver = {
.name = "udlfb",
.probe = dlfb_probe,
.disconnect = dlfb_disconnect,
.probe = dlfb_usb_probe,
.disconnect = dlfb_usb_disconnect,
.id_table = id_table,
};
static int __init dlfb_init(void)
static int __init dlfb_module_init(void)
{
int res;
@ -1435,13 +1521,13 @@ static int __init dlfb_init(void)
return res;
}
static void __exit dlfb_exit(void)
static void __exit dlfb_module_exit(void)
{
usb_deregister(&dlfb_driver);
}
module_init(dlfb_init);
module_exit(dlfb_exit);
module_init(dlfb_module_init);
module_exit(dlfb_module_exit);
static void dlfb_urb_completion(struct urb *urb)
{
@ -1613,6 +1699,8 @@ static int dlfb_submit_urb(struct dlfb_data *dev, struct urb *urb, size_t len)
}
MODULE_AUTHOR("Roberto De Ioris <roberto@unbit.it>, "
"Jaya Kumar <jayakumar.lkml@gmail.com>");
MODULE_DESCRIPTION(DRIVER_VERSION);
"Jaya Kumar <jayakumar.lkml@gmail.com>, "
"Bernie Thompson <bernie@plugable.com>");
MODULE_DESCRIPTION("DisplayLink kernel framebuffer driver");
MODULE_LICENSE("GPL");

View File

@ -25,13 +25,14 @@ struct dlfb_data {
struct device *gdev; /* &udev->dev */
struct usb_interface *interface;
struct urb *tx_urb, *ctrl_urb;
struct usb_ctrlrequest dr;
struct fb_info *info;
struct urb_list urbs;
struct kref kref;
char *buf;
char *bufend;
char *backing_buffer;
struct delayed_work deferred_work;
struct mutex fb_open_lock;
struct mutex bulk_mutex;
int fb_count;
atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */