diff --git a/.mailmap b/.mailmap index 4e83e7b52d15..a62e6a84fd1e 100644 --- a/.mailmap +++ b/.mailmap @@ -92,6 +92,7 @@ Rudolf Marek Rui Saraiva Sachin P Sant Sam Ravnborg +Sascha Hauer S.Çağlar Onur Simon Kelley Stéphane Witzmann @@ -100,6 +101,7 @@ Tejun Heo Thomas Graf Tony Luck Tsuneo Yoshioka -Uwe Kleine-König Uwe Kleine-König +Uwe Kleine-König +Uwe Kleine-König Valdis Kletnieks diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt new file mode 100644 index 000000000000..e164403f60e1 --- /dev/null +++ b/Documentation/block/queue-sysfs.txt @@ -0,0 +1,63 @@ +Queue sysfs files +================= + +This text file will detail the queue files that are located in the sysfs tree +for each block device. Note that stacked devices typically do not export +any settings, since their queue merely functions are a remapping target. +These files are the ones found in the /sys/block/xxx/queue/ directory. + +Files denoted with a RO postfix are readonly and the RW postfix means +read-write. + +hw_sector_size (RO) +------------------- +This is the hardware sector size of the device, in bytes. + +max_hw_sectors_kb (RO) +---------------------- +This is the maximum number of kilobytes supported in a single data transfer. + +max_sectors_kb (RW) +------------------- +This is the maximum number of kilobytes that the block layer will allow +for a filesystem request. Must be smaller than or equal to the maximum +size allowed by the hardware. + +nomerges (RW) +------------- +This enables the user to disable the lookup logic involved with IO merging +requests in the block layer. Merging may still occur through a direct +1-hit cache, since that comes for (almost) free. The IO scheduler will not +waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults +to 0, enabling all merges. + +nr_requests (RW) +---------------- +This controls how many requests may be allocated in the block layer for +read or write requests. Note that the total allocated number may be twice +this amount, since it applies only to reads or writes (not the accumulated +sum). + +read_ahead_kb (RW) +------------------ +Maximum number of kilobytes to read-ahead for filesystems on this block +device. + +rq_affinity (RW) +---------------- +If this option is enabled, the block layer will migrate request completions +to the CPU that originally submitted the request. For some workloads +this provides a significant reduction in CPU cycles due to caching effects. + +scheduler (RW) +-------------- +When read, this file will display the current and available IO schedulers +for this block device. The currently active IO scheduler will be enclosed +in [] brackets. Writing an IO scheduler name to this file will switch +control of this block device to that new IO scheduler. Note that writing +an IO scheduler name to this file will attempt to load that IO scheduler +module, if it isn't already present in the system. + + + +Jens Axboe , February 2009 diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index e3443ddcfb89..917918f84fc7 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -195,19 +195,3 @@ scaling_setspeed. By "echoing" a new frequency into this you can change the speed of the CPU, but only within the limits of scaling_min_freq and scaling_max_freq. - - -3.2 Deprecated Interfaces -------------------------- - -Depending on your kernel configuration, you might find the following -cpufreq-related files: -/proc/cpufreq -/proc/sys/cpu/*/speed -/proc/sys/cpu/*/speed-min -/proc/sys/cpu/*/speed-max - -These are files for deprecated interfaces to cpufreq, which offer far -less functionality. Because of this, these interfaces aren't described -here. - diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 68ef48839c04..9f8740ca3f3b 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -9,6 +9,7 @@ that support it. For example, a given bus might look like this: | |-- class | |-- config | |-- device + | |-- enable | |-- irq | |-- local_cpus | |-- resource @@ -32,6 +33,7 @@ files, each with their own function. class PCI class (ascii, ro) config PCI config space (binary, rw) device PCI device (ascii, ro) + enable Whether the device is enabled (ascii, rw) irq IRQ number (ascii, ro) local_cpus nearby CPU mask (cpumask, ro) resource PCI resource host addresses (ascii, ro) @@ -57,10 +59,19 @@ used to do actual device programming from userspace. Note that some platforms don't support mmapping of certain resources, so be sure to check the return value from any attempted mmap. +The 'enable' file provides a counter that indicates how many times the device +has been enabled. If the 'enable' file currently returns '4', and a '1' is +echoed into it, it will then return '5'. Echoing a '0' into it will decrease +the count. Even when it returns to 0, though, some of the initialisation +may not be reversed. + The 'rom' file is special in that it provides read-only access to the device's ROM file, if available. It's disabled by default, however, so applications should write the string "1" to the file to enable it before attempting a read -call, and disable it following the access by writing "0" to the file. +call, and disable it following the access by writing "0" to the file. Note +that the device must be enabled for a rom read to return data succesfully. +In the event a driver is not bound to the device, it can be enabled using the +'enable' file, documented above. Accessing legacy resources through sysfs ---------------------------------------- diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt index 84da2a4ba25a..12fedb7834c6 100644 --- a/Documentation/filesystems/ubifs.txt +++ b/Documentation/filesystems/ubifs.txt @@ -79,13 +79,6 @@ Mount options (*) == default. -norm_unmount (*) commit on unmount; the journal is committed - when the file-system is unmounted so that the - next mount does not have to replay the journal - and it becomes very fast; -fast_unmount do not commit on unmount; this option makes - unmount faster, but the next mount slower - because of the need to replay the journal. bulk_read read more in one go to take advantage of flash media that read faster sequentially no_bulk_read (*) do not bulk-read diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt new file mode 100644 index 000000000000..8447fd7090d0 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt @@ -0,0 +1,180 @@ +MPC5200 Device Tree Bindings +---------------------------- + +(c) 2006-2009 Secret Lab Technologies Ltd +Grant Likely + +Naming conventions +------------------ +For mpc5200 on-chip devices, the format for each compatible value is +-[-]. The OS should be able to match a device driver +to the device based solely on the compatible value. If two drivers +match on the compatible list; the 'most compatible' driver should be +selected. + +The split between the MPC5200 and the MPC5200B leaves a bit of a +conundrum. How should the compatible property be set up to provide +maximum compatibility information; but still accurately describe the +chip? For the MPC5200; the answer is easy. Most of the SoC devices +originally appeared on the MPC5200. Since they didn't exist anywhere +else; the 5200 compatible properties will contain only one item; +"fsl,mpc5200-". + +The 5200B is almost the same as the 5200, but not quite. It fixes +silicon bugs and it adds a small number of enhancements. Most of the +devices either provide exactly the same interface as on the 5200. A few +devices have extra functions but still have a backwards compatible mode. +To express this information as completely as possible, 5200B device trees +should have two items in the compatible list: + compatible = "fsl,mpc5200b-","fsl,mpc5200-"; + +It is *strongly* recommended that 5200B device trees follow this convention +(instead of only listing the base mpc5200 item). + +ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec"; + ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec"; + +Modal devices, like PSCs, also append the configured function to the +end of the compatible field. ie. A PSC in i2s mode would specify +"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to +avoid naming conflicts with non-psc devices providing the same +function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe +the mpc5200 simple spi device and a PSC spi mode respectively. + +At the time of writing, exact chip may be either 'fsl,mpc5200' or +'fsl,mpc5200b'. + +The soc node +------------ +This node describes the on chip SOC peripherals. Every mpc5200 based +board will have this node, and as such there is a common naming +convention for SOC devices. + +Required properties: +name description +---- ----------- +ranges Memory range of the internal memory mapped registers. + Should be <0 [baseaddr] 0xc000> +reg Should be <[baseaddr] 0x100> +compatible mpc5200: "fsl,mpc5200-immr" + mpc5200b: "fsl,mpc5200b-immr" +system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI + clocks are derived from the fsystem clock. +bus-frequency IPB bus frequency in Hz. Clock rate + used by most of the soc devices. + +soc child nodes +--------------- +Any on chip SOC devices available to Linux must appear as soc5200 child nodes. + +Note: The tables below show the value for the mpc5200. A mpc5200b device +tree should use the "fsl,mpc5200b-","fsl,mpc5200-" form. + +Required soc5200 child nodes: +name compatible Description +---- ---------- ----------- +cdm@ fsl,mpc5200-cdm Clock Distribution +interrupt-controller@ fsl,mpc5200-pic need an interrupt + controller to boot +bestcomm@ fsl,mpc5200-bestcomm Bestcomm DMA controller + +Recommended soc5200 child nodes; populate as needed for your board +name compatible Description +---- ---------- ----------- +timer@ fsl,mpc5200-gpt General purpose timers +gpio@ fsl,mpc5200-gpio MPC5200 simple gpio controller +gpio@ fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller +rtc@ fsl,mpc5200-rtc Real time clock +mscan@ fsl,mpc5200-mscan CAN bus controller +pci@ fsl,mpc5200-pci PCI bridge +serial@ fsl,mpc5200-psc-uart PSC in serial mode +i2s@ fsl,mpc5200-psc-i2s PSC in i2s mode +ac97@ fsl,mpc5200-psc-ac97 PSC in ac97 mode +spi@ fsl,mpc5200-psc-spi PSC in spi mode +irda@ fsl,mpc5200-psc-irda PSC in IrDA mode +spi@ fsl,mpc5200-spi MPC5200 spi device +ethernet@ fsl,mpc5200-fec MPC5200 ethernet device +ata@ fsl,mpc5200-ata IDE ATA interface +i2c@ fsl,mpc5200-i2c I2C controller +usb@ fsl,mpc5200-ohci,ohci-be USB controller +xlb@ fsl,mpc5200-xlb XLB arbitrator + +fsl,mpc5200-gpt nodes +--------------------- +On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board +design supports the internal wdt, then the device node for GPT0 should +include the empty property 'fsl,has-wdt'. + +An mpc5200-gpt can be used as a single line GPIO controller. To do so, +add the following properties to the gpt node: + gpio-controller; + #gpio-cells = <2>; +When referencing the GPIO line from another node, the first cell must always +be zero and the second cell represents the gpio flags and described in the +gpio device tree binding. + +An mpc5200-gpt can be used as a single line edge sensitive interrupt +controller. To do so, add the following properties to the gpt node: + interrupt-controller; + #interrupt-cells = <1>; +When referencing the IRQ line from another node, the cell represents the +sense mode; 1 for edge rising, 2 for edge falling. + +fsl,mpc5200-psc nodes +--------------------- +The PSCs should include a cell-index which is the index of the PSC in +hardware. cell-index is used to determine which shared SoC registers to +use when setting up PSC clocking. cell-index number starts at '0'. ie: + PSC1 has 'cell-index = <0>' + PSC4 has 'cell-index = <3>' + +PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in +i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the +compatible field. + + +fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes +------------------------------------------------ +Each GPIO controller node should have the empty property gpio-controller and +#gpio-cells set to 2. First cell is the GPIO number which is interpreted +according to the bit numbers in the GPIO control registers. The second cell +is for flags which is currently unused. + +fsl,mpc5200-fec nodes +--------------------- +The FEC node can specify one of the following properties to configure +the MII link: +- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire + mode instead of MII +- current-speed - Specifies that the MII should be configured for a fixed + speed. This property should contain two cells. The + first cell specifies the speed in Mbps and the second + should be '0' for half duplex and '1' for full duplex +- phy-handle - Contains a phandle to an Ethernet PHY. + +Interrupt controller (fsl,mpc5200-pic) node +------------------------------------------- +The mpc5200 pic binding splits hardware IRQ numbers into two levels. The +split reflects the layout of the PIC hardware itself, which groups +interrupts into one of three groups; CRIT, MAIN or PERP. Also, the +Bestcomm dma engine has it's own set of interrupt sources which are +cascaded off of peripheral interrupt 0, which the driver interprets as a +fourth group, SDMA. + +The interrupts property for device nodes using the mpc5200 pic consists +of three cells; + + L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] + L2 := interrupt number; directly mapped from the value in the + "ICTL PerStat, MainStat, CritStat Encoded Register" + level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] + +For external IRQs, use the following interrupt property values (how to +specify external interrupts is a frequently asked question): +External interrupts: + external irq0: interrupts = <0 0 n>; + external irq1: interrupts = <1 1 n>; + external irq2: interrupts = <1 2 n>; + external irq3: interrupts = <1 3 n>; +'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low) + diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt deleted file mode 100644 index 6f12f1c79c0c..000000000000 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ /dev/null @@ -1,277 +0,0 @@ -MPC5200 Device Tree Bindings ----------------------------- - -(c) 2006-2007 Secret Lab Technologies Ltd -Grant Likely - -********** DRAFT *********** -* WARNING: Do not depend on the stability of these bindings just yet. -* The MPC5200 device tree conventions are still in flux -* Keep an eye on the linuxppc-dev mailing list for more details -********** DRAFT *********** - -I - Introduction -================ -Boards supported by the arch/powerpc architecture require device tree be -passed by the boot loader to the kernel at boot time. The device tree -describes what devices are present on the board and how they are -connected. The device tree can either be passed as a binary blob (as -described in Documentation/powerpc/booting-without-of.txt), or passed -by Open Firmware (IEEE 1275) compatible firmware using an OF compatible -client interface API. - -This document specifies the requirements on the device-tree for mpc5200 -based boards. These requirements are above and beyond the details -specified in either the Open Firmware spec or booting-without-of.txt - -All new mpc5200-based boards are expected to match this document. In -cases where this document is not sufficient to support a new board port, -this document should be updated as part of adding the new board support. - -II - Philosophy -=============== -The core of this document is naming convention. The whole point of -defining this convention is to reduce or eliminate the number of -special cases required to support a 5200 board. If all 5200 boards -follow the same convention, then generic 5200 support code will work -rather than coding special cases for each new board. - -This section tries to capture the thought process behind why the naming -convention is what it is. - -1. names ---------- -There is strong convention/requirements already established for children -of the root node. 'cpus' describes the processor cores, 'memory' -describes memory, and 'chosen' provides boot configuration. Other nodes -are added to describe devices attached to the processor local bus. - -Following convention already established with other system-on-chip -processors, 5200 device trees should use the name 'soc5200' for the -parent node of on chip devices, and the root node should be its parent. - -Child nodes are typically named after the configured function. ie. -the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'. - -2. device_type property ------------------------ -similar to the node name convention above; the device_type reflects the -configured function of a device. ie. 'serial' for a uart and 'spi' for -an spi controller. However, while node names *should* reflect the -configured function, device_type *must* match the configured function -exactly. - -3. compatible property ----------------------- -Since device_type isn't enough to match devices to drivers, there also -needs to be a naming convention for the compatible property. Compatible -is an list of device descriptions sorted from specific to generic. For -the mpc5200, the required format for each compatible value is --[-]. The OS should be able to match a device driver -to the device based solely on the compatible value. If two drivers -match on the compatible list; the 'most compatible' driver should be -selected. - -The split between the MPC5200 and the MPC5200B leaves a bit of a -conundrum. How should the compatible property be set up to provide -maximum compatibility information; but still accurately describe the -chip? For the MPC5200; the answer is easy. Most of the SoC devices -originally appeared on the MPC5200. Since they didn't exist anywhere -else; the 5200 compatible properties will contain only one item; -"mpc5200-". - -The 5200B is almost the same as the 5200, but not quite. It fixes -silicon bugs and it adds a small number of enhancements. Most of the -devices either provide exactly the same interface as on the 5200. A few -devices have extra functions but still have a backwards compatible mode. -To express this information as completely as possible, 5200B device trees -should have two items in the compatible list; -"mpc5200b-\0mpc5200-". It is *strongly* recommended -that 5200B device trees follow this convention (instead of only listing -the base mpc5200 item). - -If another chip appear on the market with one of the mpc5200 SoC -devices, then the compatible list should include mpc5200-. - -ie. ethernet on mpc5200: compatible = "mpc5200-ethernet" - ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet" - -Modal devices, like PSCs, also append the configured function to the -end of the compatible field. ie. A PSC in i2s mode would specify -"mpc5200-psc-i2s", not "mpc5200-i2s". This convention is chosen to -avoid naming conflicts with non-psc devices providing the same -function. For example, "mpc5200-spi" and "mpc5200-psc-spi" describe -the mpc5200 simple spi device and a PSC spi mode respectively. - -If the soc device is more generic and present on other SOCs, the -compatible property can specify the more generic device type also. - -ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan"; - -At the time of writing, exact chip may be either 'mpc5200' or -'mpc5200b'. - -Device drivers should always try to match as generically as possible. - -III - Structure -=============== -The device tree for an mpc5200 board follows the structure defined in -booting-without-of.txt with the following additional notes: - -0) the root node ----------------- -Typical root description node; see booting-without-of - -1) The cpus node ----------------- -The cpus node follows the basic layout described in booting-without-of. -The bus-frequency property holds the XLB bus frequency -The clock-frequency property holds the core frequency - -2) The memory node ------------------- -Typical memory description node; see booting-without-of. - -3) The soc5200 node -------------------- -This node describes the on chip SOC peripherals. Every mpc5200 based -board will have this node, and as such there is a common naming -convention for SOC devices. - -Required properties: -name type description ----- ---- ----------- -device_type string must be "soc" -ranges int should be <0 baseaddr baseaddr+10000> -reg int must be -compatible string mpc5200: "mpc5200-soc" - mpc5200b: "mpc5200b-soc\0mpc5200-soc" -system-frequency int Fsystem frequency; source of all - other clocks. -bus-frequency int IPB bus frequency in HZ. Clock rate - used by most of the soc devices. -#interrupt-cells int must be <3>. - -Recommended properties: -name type description ----- ---- ----------- -model string Exact model of the chip; - ie: model="fsl,mpc5200" -revision string Silicon revision of chip - ie: revision="M08A" - -The 'model' and 'revision' properties are *strongly* recommended. Having -them presence acts as a bit of a safety net for working around as yet -undiscovered bugs on one version of silicon. For example, device drivers -can use the model and revision properties to decide if a bug fix should -be turned on. - -4) soc5200 child nodes ----------------------- -Any on chip SOC devices available to Linux must appear as soc5200 child nodes. - -Note: The tables below show the value for the mpc5200. A mpc5200b device -tree should use the "mpc5200b-\0mpc5200- form. - -Required soc5200 child nodes: -name device_type compatible Description ----- ----------- ---------- ----------- -cdm@ cdm mpc5200-cmd Clock Distribution -pic@ interrupt-controller mpc5200-pic need an interrupt - controller to boot -bestcomm@ dma-controller mpc5200-bestcomm 5200 pic also requires - the bestcomm device - -Recommended soc5200 child nodes; populate as needed for your board -name device_type compatible Description ----- ----------- ---------- ----------- -gpt@ gpt fsl,mpc5200-gpt General purpose timers -gpt@ gpt fsl,mpc5200-gpt-gpio General purpose - timers in GPIO mode -gpio@ fsl,mpc5200-gpio MPC5200 simple gpio - controller -gpio@ fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio - controller -rtc@ rtc mpc5200-rtc Real time clock -mscan@ mscan mpc5200-mscan CAN bus controller -pci@ pci mpc5200-pci PCI bridge -serial@ serial mpc5200-psc-uart PSC in serial mode -i2s@ sound mpc5200-psc-i2s PSC in i2s mode -ac97@ sound mpc5200-psc-ac97 PSC in ac97 mode -spi@ spi mpc5200-psc-spi PSC in spi mode -irda@ irda mpc5200-psc-irda PSC in IrDA mode -spi@ spi mpc5200-spi MPC5200 spi device -ethernet@ network mpc5200-fec MPC5200 ethernet device -ata@ ata mpc5200-ata IDE ATA interface -i2c@ i2c mpc5200-i2c I2C controller -usb@ usb-ohci-be mpc5200-ohci,ohci-be USB controller -xlb@ xlb mpc5200-xlb XLB arbitrator - -Important child node properties -name type description ----- ---- ----------- -cell-index int When multiple devices are present, is the - index of the device in the hardware (ie. There - are 6 PSC on the 5200 numbered PSC1 to PSC6) - PSC1 has 'cell-index = <0>' - PSC4 has 'cell-index = <3>' - -5) General Purpose Timer nodes (child of soc5200 node) -On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board -design supports the internal wdt, then the device node for GPT0 should -include the empty property 'fsl,has-wdt'. - -6) PSC nodes (child of soc5200 node) -PSC nodes can define the optional 'port-number' property to force assignment -order of serial ports. For example, PSC5 might be physically connected to -the port labeled 'COM1' and PSC1 wired to 'COM1'. In this case, PSC5 would -have a "port-number = <0>" property, and PSC1 would have "port-number = <1>". - -PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in -i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the -compatible field. - -7) GPIO controller nodes -Each GPIO controller node should have the empty property gpio-controller and -#gpio-cells set to 2. First cell is the GPIO number which is interpreted -according to the bit numbers in the GPIO control registers. The second cell -is for flags which is currently unsused. - -8) FEC nodes -The FEC node can specify one of the following properties to configure -the MII link: -"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire - mode instead of MII -"current-speed" - Specifies that the MII should be configured for a fixed - speed. This property should contain two cells. The - first cell specifies the speed in Mbps and the second - should be '0' for half duplex and '1' for full duplex -"phy-handle" - Contains a phandle to an Ethernet PHY. - -IV - Extra Notes -================ - -1. Interrupt mapping --------------------- -The mpc5200 pic driver splits hardware IRQ numbers into two levels. The -split reflects the layout of the PIC hardware itself, which groups -interrupts into one of three groups; CRIT, MAIN or PERP. Also, the -Bestcomm dma engine has it's own set of interrupt sources which are -cascaded off of peripheral interrupt 0, which the driver interprets as a -fourth group, SDMA. - -The interrupts property for device nodes using the mpc5200 pic consists -of three cells; - - L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] - L2 := interrupt number; directly mapped from the value in the - "ICTL PerStat, MainStat, CritStat Encoded Register" - level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] - -2. Shared registers -------------------- -Some SoC devices share registers between them. ie. the i2c devices use -a single clock control register, and almost all device are affected by -the port_config register. Devices which need to manipulate shared regs -should look to the parent SoC node. The soc node is responsible -for arbitrating all shared register access. diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c index 079b628481cf..d6e70bef8ad0 100644 --- a/Documentation/video4linux/v4lgrab.c +++ b/Documentation/video4linux/v4lgrab.c @@ -4,12 +4,21 @@ * * Compile with: * gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab - * Use as: - * v4lgrab >image.ppm + * Use as: + * v4lgrab >image.ppm * * Copyright (C) 1998-05-03, Phil Blundell - * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c - * with minor modifications (Dave Forrest, drf5n@virginia.edu). + * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c + * with minor modifications (Dave Forrest, drf5n@virginia.edu). + * + * + * For some cameras you may need to pre-load libv4l to perform + * the necessary decompression, e.g.: + * + * export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so + * ./v4lgrab >image.ppm + * + * see http://hansdegoede.livejournal.com/3636.html for details. * */ @@ -24,7 +33,7 @@ #include #include -#define FILE "/dev/video0" +#define VIDEO_DEV "/dev/video0" /* Stole this from tvset.c */ @@ -90,7 +99,7 @@ int get_brightness_adj(unsigned char *image, long size, int *brightness) { int main(int argc, char ** argv) { - int fd = open(FILE, O_RDONLY), f; + int fd = open(VIDEO_DEV, O_RDONLY), f; struct video_capability cap; struct video_window win; struct video_picture vpic; @@ -100,13 +109,13 @@ int main(int argc, char ** argv) unsigned int i, src_depth; if (fd < 0) { - perror(FILE); + perror(VIDEO_DEV); exit(1); } if (ioctl(fd, VIDIOCGCAP, &cap) < 0) { perror("VIDIOGCAP"); - fprintf(stderr, "(" FILE " not a video4linux device?)\n"); + fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n"); close(fd); exit(1); } diff --git a/MAINTAINERS b/MAINTAINERS index 474ec0c53272..0ea3a6d98714 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -911,7 +911,7 @@ S: Maintained BLACKFIN ARCHITECTURE P: Bryan Wu M: cooloney@kernel.org -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported @@ -1021,6 +1021,14 @@ M: mb@bu3sch.de W: http://bu3sch.de/btgpio.php S: Maintained +BTRFS FILE SYSTEM +P: Chris Mason +M: chris.mason@oracle.com +L: linux-btrfs@vger.kernel.org +W: http://btrfs.wiki.kernel.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git +S: Maintained + BTTV VIDEO4LINUX DRIVER P: Mauro Carvalho Chehab M: mchehab@infradead.org @@ -2212,7 +2220,7 @@ P: Sean Hefty M: sean.hefty@intel.com P: Hal Rosenstock M: hal.rosenstock@gmail.com -L: general@lists.openfabrics.org +L: general@lists.openfabrics.org (moderated for non-subscribers) W: http://www.openib.org/ T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported @@ -4841,6 +4849,7 @@ P: Ingo Molnar M: mingo@redhat.com P: H. Peter Anvin M: hpa@zytor.com +M: x86@kernel.org L: linux-kernel@vger.kernel.org T: git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git S: Maintained diff --git a/Makefile b/Makefile index 7715b2c14fb4..681c1d23b4d4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 29 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Erotic Pickled Herring # *DOCUMENTATION* diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h index 7b85b7c93709..1720c8ad86fe 100644 --- a/arch/alpha/include/asm/bug.h +++ b/arch/alpha/include/asm/bug.h @@ -8,12 +8,12 @@ /* ??? Would be nice to use .gprel32 here, but we can't be sure that the function loaded the GP, so this could fail in modules. */ -#define BUG() { \ +#define BUG() do { \ __asm__ __volatile__( \ "call_pal %0 # bugchk\n\t" \ ".long %1\n\t.8byte %2" \ : : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \ - for ( ; ; ); } + for ( ; ; ); } while (0) #define HAVE_ARCH_BUG #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 77b047475539..85040cfeb5e5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -650,6 +650,7 @@ ENTRY(fp_enter) no_fp: mov pc, lr __und_usr_unknown: + enable_irq mov r0, sp adr lr, ret_from_exception b do_undefinstr diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 06269ea375c5..49a6ba926c2b 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -136,7 +136,7 @@ ENTRY(mcount) ldmia sp!, {r0-r3, pc} trace: - ldr r1, [fp, #-4] + ldr r1, [fp, #-4] @ lr of instrumented routine mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 4bb723eadad1..45eacb5a2ecd 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -101,7 +101,7 @@ unlock: /* Handle bad interrupts */ static struct irq_desc bad_irq_desc = { .handle_irq = handle_bad_irq, - .lock = SPIN_LOCK_UNLOCKED + .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock), }; #ifdef CONFIG_CPUMASK_OFFSTACK diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index c2a96e3965a6..e61967dde9a1 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -27,6 +27,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 77382d8b6b2f..ba5d7c08dc17 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -181,7 +181,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, } size = OMAP1_MMC_SIZE; - omap_mmc_add(i, base, size, irq, mmc_data[i]); + omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]); }; } diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index ca7a0cc1707c..575ba31295cf 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -28,81 +28,8 @@ #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) -struct mcbsp_internal_clk { - struct clk clk; - struct clk **childs; - int n_childs; -}; - #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) -static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) -{ - const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; - int i; - - mclk->n_childs = ARRAY_SIZE(clk_names); - mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *), - GFP_KERNEL); - - for (i = 0; i < mclk->n_childs; i++) { - /* We fake a platform device to get correct device id */ - struct platform_device pdev; - - pdev.dev.bus = &platform_bus_type; - pdev.id = mclk->clk.id; - mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]); - if (IS_ERR(mclk->childs[i])) - printk(KERN_ERR "Could not get clock %s (%d).\n", - clk_names[i], mclk->clk.id); - } -} - -static int omap_mcbsp_clk_enable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_enable(mclk->childs[i]); - return 0; -} - -static void omap_mcbsp_clk_disable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_disable(mclk->childs[i]); -} - -static struct mcbsp_internal_clk omap_mcbsp_clks[] = { - { - .clk = { - .name = "mcbsp_clk", - .id = 1, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 3, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, -}; - -#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) -#else -#define omap_mcbsp_clks_size 0 -static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks; -static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) -{ } +const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" }; #endif static void omap1_mcbsp_request(unsigned int id) @@ -167,8 +94,9 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", - }, + .clk_names = clk_names, + .num_clks = 3, + }, { .phys_base = OMAP1510_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP2_RX, @@ -184,7 +112,8 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 3, }, }; #define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata) @@ -202,7 +131,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP1RX, .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 3, }, { .phys_base = OMAP1610_MCBSP2_BASE, @@ -219,7 +149,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .rx_irq = INT_McBSP3RX, .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 3, }, }; #define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata) @@ -230,15 +161,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { - int i; - - for (i = 0; i < omap_mcbsp_clks_size; i++) { - if (cpu_is_omap15xx() || cpu_is_omap16xx()) { - omap_mcbsp_clk_init(&omap_mcbsp_clks[i]); - clk_register(&omap_mcbsp_clks[i].clk); - } - } - if (cpu_is_omap730()) omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9d7216ff6c9f..ce03fa750775 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -421,6 +421,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { int i; + char *name; for (i = 0; i < nr_controllers; i++) { unsigned long base, size; @@ -450,12 +451,14 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, continue; } - if (cpu_is_omap2420()) + if (cpu_is_omap2420()) { size = OMAP2420_MMC_SIZE; - else + name = "mmci-omap"; + } else { size = HSMMC_SIZE; - - omap_mmc_add(i, base, size, irq, mmc_data[i]); + name = "mmci-omap-hs"; + } + omap_mmc_add(name, i, base, size, irq, mmc_data[i]); }; } diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index b0f8e7d62798..b52a02fc7cd6 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -172,9 +172,13 @@ void __init omap34xx_check_revision(void) omap_revision = OMAP3430_REV_ES3_0; rev_name = "ES3.0"; break; + case 4: + omap_revision = OMAP3430_REV_ES3_1; + rev_name = "ES3.1"; + break; default: /* Use the latest known revision as default */ - omap_revision = OMAP3430_REV_ES3_0; + omap_revision = OMAP3430_REV_ES3_1; rev_name = "Unknown revision\n"; } } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 636e2821af7d..9ba20d985dda 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -134,6 +134,7 @@ static struct irq_chip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, + .disable = omap_mask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index e20023c9d15d..a9e631fc1134 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -24,106 +24,7 @@ #include #include -struct mcbsp_internal_clk { - struct clk clk; - struct clk **childs; - int n_childs; -}; - -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) -static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk) -{ - const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; - int i; - - mclk->n_childs = ARRAY_SIZE(clk_names); - mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *), - GFP_KERNEL); - - for (i = 0; i < mclk->n_childs; i++) { - /* We fake a platform device to get correct device id */ - struct platform_device pdev; - - pdev.dev.bus = &platform_bus_type; - pdev.id = mclk->clk.id; - mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]); - if (IS_ERR(mclk->childs[i])) - printk(KERN_ERR "Could not get clock %s (%d).\n", - clk_names[i], mclk->clk.id); - } -} - -static int omap_mcbsp_clk_enable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_enable(mclk->childs[i]); - return 0; -} - -static void omap_mcbsp_clk_disable(struct clk *clk) -{ - struct mcbsp_internal_clk *mclk = container_of(clk, - struct mcbsp_internal_clk, clk); - int i; - - for (i = 0; i < mclk->n_childs; i++) - clk_disable(mclk->childs[i]); -} - -static struct mcbsp_internal_clk omap_mcbsp_clks[] = { - { - .clk = { - .name = "mcbsp_clk", - .id = 1, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 2, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 3, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 4, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, - { - .clk = { - .name = "mcbsp_clk", - .id = 5, - .enable = omap_mcbsp_clk_enable, - .disable = omap_mcbsp_clk_disable, - }, - }, -}; - -#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks) -#else -#define omap_mcbsp_clks_size 0 -static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks; -static inline void omap_mcbsp_clk_init(struct clk *clk) -{ } -#endif +const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" }; static void omap2_mcbsp2_mux_setup(void) { @@ -156,7 +57,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -165,7 +67,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, }; #define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) @@ -183,7 +86,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -192,7 +96,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP3_BASE, @@ -201,7 +106,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP4_BASE, @@ -210,7 +116,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP2430_MCBSP5_BASE, @@ -219,7 +126,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, }; #define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) @@ -237,7 +145,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -246,7 +155,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -255,7 +165,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -264,7 +175,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -273,7 +185,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .clk_name = "mcbsp_clk", + .clk_names = clk_names, + .num_clks = 2, }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) @@ -284,14 +197,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { static int __init omap2_mcbsp_init(void) { - int i; - - for (i = 0; i < omap_mcbsp_clks_size; i++) { - /* Once we call clk_get inside init, we do not register it */ - omap_mcbsp_clk_init(&omap_mcbsp_clks[i]); - clk_register(&omap_mcbsp_clks[i].clk); - } - if (cpu_is_omap2420()) omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ; if (cpu_is_omap2430()) diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index 43336b93b21c..bf9e96105e11 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -93,9 +93,8 @@ ENTRY(omap24xx_cpu_suspend) orr r4, r4, #0x40 @ enable self refresh on idle req mov r5, #0x2000 @ set delay (DPLL relock + DLL relock) str r4, [r2] @ make it so - mov r2, #0 nop - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt + mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt nop loop: subs r5, r5, #0x1 @ awake, wait just a bit diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index ae6036300f60..9fc13a2cc3f4 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -118,7 +118,8 @@ static void __init omap2_gp_clockevent_init(void) clockevent_gpt.max_delta_ns = clockevent_delta2ns(0xffffffff, &clockevent_gpt); clockevent_gpt.min_delta_ns = - clockevent_delta2ns(1, &clockevent_gpt); + clockevent_delta2ns(3, &clockevent_gpt); + /* Timer internal resynch latency. */ clockevent_gpt.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_gpt); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index c1fbd5b5f9c4..23cfdd593954 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -289,7 +289,7 @@ static struct platform_device sa11x0pcmcia_device = { }; static struct platform_device sa11x0mtd_device = { - .name = "flash", + .name = "sa1100-mtd", .id = -1, }; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 81d0b8772de3..bc0099d5ae85 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -66,7 +66,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) * fault (ie, is old), we can safely ignore any issues. */ if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) { - flush_cache_page(vma, address, pte_pfn(entry)); + unsigned long pfn = pte_pfn(entry); + flush_cache_page(vma, address, pfn); + outer_flush_range((pfn << PAGE_SHIFT), + (pfn << PAGE_SHIFT) + PAGE_SIZE); pte_val(entry) &= ~L_PTE_MT_MASK; pte_val(entry) |= shared_pte_mask; set_pte_at(vma->vm_mm, address, pte, entry); diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h new file mode 100644 index 000000000000..de2128dada5c --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mmc.h @@ -0,0 +1,36 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include + +struct device; + +/* board specific SDHC data, optional. + * If not present, a writable card with 3,3V is assumed. + */ +struct imxmmc_platform_data { + /* Return values for the get_ro callback should be: + * 0 for a read/write card + * 1 for a read-only card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + */ + int (*get_ro)(struct device *); + + /* board specific hook to (de)initialize the SD slot. + * The board code can call 'handler' on a card detection + * change giving data as argument. + */ + int (*init)(struct device *dev, irq_handler_t handler, void *data); + void (*exit)(struct device *dev, void *data); + + /* available voltages. If not given, assume + * MMC_VDD_32_33 | MMC_VDD_33_34 + */ + unsigned int ocr_avail; + + /* adjust slot voltage */ + void (*setpower)(struct device *, unsigned int vdd); +}; + +#endif diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index ac15c23fd5da..208dbb121f47 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -200,14 +200,15 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, /* * Register MMC devices. Called from mach-omap1 and mach-omap2 device init. */ -int __init omap_mmc_add(int id, unsigned long base, unsigned long size, - unsigned int irq, struct omap_mmc_platform_data *data) +int __init omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data) { struct platform_device *pdev; struct resource res[OMAP_MMC_NR_RES]; int ret; - pdev = platform_device_alloc("mmci-omap", id); + pdev = platform_device_alloc(name, id); if (!pdev) return -ENOMEM; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index e77373c39f8c..47ec77af4ccb 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -709,6 +709,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->dev_name = dev_name; chan->callback = callback; chan->data = data; + chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 if (cpu_class_is_omap2()) { @@ -1888,11 +1889,11 @@ static int omap2_dma_handle_ch(int ch) status = dma_read(CSR(ch)); } + dma_write(status, CSR(ch)); + if (likely(dma_chan[ch].callback != NULL)) dma_chan[ch].callback(ch, status, dma_chan[ch].data); - dma_write(status, CSR(ch)); - return 0; } diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index b2062f1175de..a8e1178a9468 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -339,6 +339,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3430_REV_ES2_0 0x34301034 #define OMAP3430_REV_ES2_1 0x34302034 #define OMAP3430_REV_ES3_0 0x34303034 +#define OMAP3430_REV_ES3_1 0x34304034 /* * omap_chip bits diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index eef873db3d48..113c2466c86a 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -344,7 +344,8 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; - char const *clk_name; + char const **clk_names; + int num_clks; }; struct omap_mcbsp { @@ -376,7 +377,8 @@ struct omap_mcbsp { /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; struct omap_mcbsp_platform_data *pdata; - struct clk *clk; + struct clk **clks; + int num_clks; }; extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count; diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 031250f02805..73a9e15031b1 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -115,8 +115,9 @@ void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); -int omap_mmc_add(int id, unsigned long base, unsigned long size, - unsigned int irq, struct omap_mmc_platform_data *data); +int omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data); #else static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) @@ -126,8 +127,9 @@ static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { } -static inline int omap_mmc_add(int id, unsigned long base, unsigned long size, - unsigned int irq, struct omap_mmc_platform_data *data) +static inline int omap_mmc_add(const char *name, int id, unsigned long base, + unsigned long size, unsigned int irq, + struct omap_mmc_platform_data *data) { return 0; } diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index f2401a831f99..e5842e30e534 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -214,6 +214,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; + int i; int err; if (!omap_mcbsp_check_valid_id(id)) { @@ -225,7 +226,8 @@ int omap_mcbsp_request(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) mcbsp->pdata->ops->request(id); - clk_enable(mcbsp->clk); + for (i = 0; i < mcbsp->num_clks; i++) + clk_enable(mcbsp->clks[i]); spin_lock(&mcbsp->lock); if (!mcbsp->free) { @@ -276,6 +278,7 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { struct omap_mcbsp *mcbsp; + int i; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -286,7 +289,8 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - clk_disable(mcbsp->clk); + for (i = mcbsp->num_clks - 1; i >= 0; i--) + clk_disable(mcbsp->clks[i]); spin_lock(&mcbsp->lock); if (mcbsp->free) { @@ -872,6 +876,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; struct omap_mcbsp *mcbsp; int id = pdev->id - 1; + int i; int ret = 0; if (!pdata) { @@ -916,14 +921,25 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dma_rx_sync = pdata->dma_rx_sync; mcbsp->dma_tx_sync = pdata->dma_tx_sync; - if (pdata->clk_name) - mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name); - if (IS_ERR(mcbsp->clk)) { - dev_err(&pdev->dev, - "Invalid clock configuration for McBSP%d.\n", - mcbsp->id); - ret = PTR_ERR(mcbsp->clk); - goto err_clk; + if (pdata->num_clks) { + mcbsp->num_clks = pdata->num_clks; + mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *), + GFP_KERNEL); + if (!mcbsp->clks) { + ret = -ENOMEM; + goto exit; + } + for (i = 0; i < mcbsp->num_clks; i++) { + mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]); + if (IS_ERR(mcbsp->clks[i])) { + dev_err(&pdev->dev, + "Invalid %s configuration for McBSP%d.\n", + pdata->clk_names[i], mcbsp->id); + ret = PTR_ERR(mcbsp->clks[i]); + goto err_clk; + } + } + } mcbsp->pdata = pdata; @@ -932,6 +948,9 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) return 0; err_clk: + while (i--) + clk_put(mcbsp->clks[i]); + kfree(mcbsp->clks); iounmap(mcbsp->io_base); err_ioremap: mcbsp->free = 0; @@ -942,6 +961,7 @@ exit: static int __devexit omap_mcbsp_remove(struct platform_device *pdev) { struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); + int i; platform_set_drvdata(pdev, NULL); if (mcbsp) { @@ -950,12 +970,18 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); - clk_disable(mcbsp->clk); - clk_put(mcbsp->clk); + for (i = mcbsp->num_clks - 1; i >= 0; i--) { + clk_disable(mcbsp->clks[i]); + clk_put(mcbsp->clks[i]); + } iounmap(mcbsp->io_base); - mcbsp->clk = NULL; + if (mcbsp->num_clks) { + kfree(mcbsp->clks); + mcbsp->clks = NULL; + mcbsp->num_clks = 0; + } mcbsp->free = 0; mcbsp->dev = NULL; } diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a949c4fbbddd..8f1f97d56e1e 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -169,26 +169,51 @@ config BF542 help BF542 Processor Support. +config BF542M + bool "BF542m" + help + BF542 Processor Support. + config BF544 bool "BF544" help BF544 Processor Support. +config BF544M + bool "BF544m" + help + BF544 Processor Support. + config BF547 bool "BF547" help BF547 Processor Support. +config BF547M + bool "BF547m" + help + BF547 Processor Support. + config BF548 bool "BF548" help BF548 Processor Support. +config BF548M + bool "BF548m" + help + BF548 Processor Support. + config BF549 bool "BF549" help BF549 Processor Support. +config BF549M + bool "BF549m" + help + BF549 Processor Support. + config BF561 bool "BF561" help @@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0 config BF_REV_MIN int - default 0 if (BF51x || BF52x || BF54x) + default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) default 2 if (BF537 || BF536 || BF534) - default 3 if (BF561 ||BF533 || BF532 || BF531) + default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM) default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF51x || BF52x || BF54x) - default 3 if (BF537 || BF536 || BF534) + default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 3 if (BF537 || BF536 || BF534 || BF54xM) default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_1 if (BF51x || BF52x || BF54x) + default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM)) default BF_REV_0_2 if (BF534 || BF536 || BF537) - default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561) + default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF51x || BF52x || BF54x) + depends on (BF51x || BF52x || (BF54x && !BF54xM)) config BF_REV_0_1 bool "0.1" - depends on (BF52x || BF54x) + depends on (BF52x || (BF54x && !BF54xM)) config BF_REV_0_2 bool "0.2" - depends on (BF52x || BF537 || BF536 || BF534 || BF54x) + depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM)) config BF_REV_0_3 bool "0.3" - depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) + depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) config BF_REV_0_4 bool "0.4" @@ -293,9 +318,14 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y +config BF54xM + bool + depends on (BF542M || BF544M || BF547M || BF548M || BF549M) + default y + config BF54x bool - depends on (BF542 || BF544 || BF547 || BF548 || BF549) + depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM) default y config MEM_GENERIC_BOARD diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index e550c8d46066..d54c8283825c 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -21,57 +21,67 @@ KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings -machine-$(CONFIG_BF512) := bf518 -machine-$(CONFIG_BF514) := bf518 -machine-$(CONFIG_BF516) := bf518 -machine-$(CONFIG_BF518) := bf518 -machine-$(CONFIG_BF522) := bf527 -machine-$(CONFIG_BF523) := bf527 -machine-$(CONFIG_BF524) := bf527 -machine-$(CONFIG_BF525) := bf527 -machine-$(CONFIG_BF526) := bf527 -machine-$(CONFIG_BF527) := bf527 -machine-$(CONFIG_BF531) := bf533 -machine-$(CONFIG_BF532) := bf533 -machine-$(CONFIG_BF533) := bf533 -machine-$(CONFIG_BF534) := bf537 -machine-$(CONFIG_BF536) := bf537 -machine-$(CONFIG_BF537) := bf537 -machine-$(CONFIG_BF538) := bf538 -machine-$(CONFIG_BF539) := bf538 -machine-$(CONFIG_BF542) := bf548 -machine-$(CONFIG_BF544) := bf548 -machine-$(CONFIG_BF547) := bf548 -machine-$(CONFIG_BF548) := bf548 -machine-$(CONFIG_BF549) := bf548 -machine-$(CONFIG_BF561) := bf561 +machine-$(CONFIG_BF512) := bf518 +machine-$(CONFIG_BF514) := bf518 +machine-$(CONFIG_BF516) := bf518 +machine-$(CONFIG_BF518) := bf518 +machine-$(CONFIG_BF522) := bf527 +machine-$(CONFIG_BF523) := bf527 +machine-$(CONFIG_BF524) := bf527 +machine-$(CONFIG_BF525) := bf527 +machine-$(CONFIG_BF526) := bf527 +machine-$(CONFIG_BF527) := bf527 +machine-$(CONFIG_BF531) := bf533 +machine-$(CONFIG_BF532) := bf533 +machine-$(CONFIG_BF533) := bf533 +machine-$(CONFIG_BF534) := bf537 +machine-$(CONFIG_BF536) := bf537 +machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF538) := bf538 +machine-$(CONFIG_BF539) := bf538 +machine-$(CONFIG_BF542) := bf548 +machine-$(CONFIG_BF542M) := bf548 +machine-$(CONFIG_BF544) := bf548 +machine-$(CONFIG_BF544M) := bf548 +machine-$(CONFIG_BF547) := bf548 +machine-$(CONFIG_BF547M) := bf548 +machine-$(CONFIG_BF548) := bf548 +machine-$(CONFIG_BF548M) := bf548 +machine-$(CONFIG_BF549) := bf548 +machine-$(CONFIG_BF549M) := bf548 +machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE -cpu-$(CONFIG_BF512) := bf512 -cpu-$(CONFIG_BF514) := bf514 -cpu-$(CONFIG_BF516) := bf516 -cpu-$(CONFIG_BF518) := bf518 -cpu-$(CONFIG_BF522) := bf522 -cpu-$(CONFIG_BF523) := bf523 -cpu-$(CONFIG_BF524) := bf524 -cpu-$(CONFIG_BF525) := bf525 -cpu-$(CONFIG_BF526) := bf526 -cpu-$(CONFIG_BF527) := bf527 -cpu-$(CONFIG_BF531) := bf531 -cpu-$(CONFIG_BF532) := bf532 -cpu-$(CONFIG_BF533) := bf533 -cpu-$(CONFIG_BF534) := bf534 -cpu-$(CONFIG_BF536) := bf536 -cpu-$(CONFIG_BF537) := bf537 -cpu-$(CONFIG_BF538) := bf538 -cpu-$(CONFIG_BF539) := bf539 -cpu-$(CONFIG_BF542) := bf542 -cpu-$(CONFIG_BF544) := bf544 -cpu-$(CONFIG_BF547) := bf547 -cpu-$(CONFIG_BF548) := bf548 -cpu-$(CONFIG_BF549) := bf549 -cpu-$(CONFIG_BF561) := bf561 +cpu-$(CONFIG_BF512) := bf512 +cpu-$(CONFIG_BF514) := bf514 +cpu-$(CONFIG_BF516) := bf516 +cpu-$(CONFIG_BF518) := bf518 +cpu-$(CONFIG_BF522) := bf522 +cpu-$(CONFIG_BF523) := bf523 +cpu-$(CONFIG_BF524) := bf524 +cpu-$(CONFIG_BF525) := bf525 +cpu-$(CONFIG_BF526) := bf526 +cpu-$(CONFIG_BF527) := bf527 +cpu-$(CONFIG_BF531) := bf531 +cpu-$(CONFIG_BF532) := bf532 +cpu-$(CONFIG_BF533) := bf533 +cpu-$(CONFIG_BF534) := bf534 +cpu-$(CONFIG_BF536) := bf536 +cpu-$(CONFIG_BF537) := bf537 +cpu-$(CONFIG_BF538) := bf538 +cpu-$(CONFIG_BF539) := bf539 +cpu-$(CONFIG_BF542) := bf542 +cpu-$(CONFIG_BF542M) := bf542m +cpu-$(CONFIG_BF544) := bf544 +cpu-$(CONFIG_BF544M) := bf544m +cpu-$(CONFIG_BF547) := bf547 +cpu-$(CONFIG_BF547M) := bf547m +cpu-$(CONFIG_BF548) := bf548 +cpu-$(CONFIG_BF548M) := bf548m +cpu-$(CONFIG_BF549) := bf549 +cpu-$(CONFIG_BF549M) := bf549m +cpu-$(CONFIG_BF561) := bf561 rev-$(CONFIG_BF_REV_0_0) := 0.0 rev-$(CONFIG_BF_REV_0_1) := 0.1 diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index defb9785c65b..4fdb9e04759f 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.28-rc2 +# Fri Jan 9 17:58:41 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF51x=y +CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_BFIN518F_EZBRD=y # @@ -598,7 +600,10 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_BFIN_MAC is not set +CONFIG_BFIN_MAC=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set @@ -679,7 +684,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 992424ff3153..8e2b855b8db7 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 21e3c1af55ba..833128b39724 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 0bdf20a1af61..334c94b51c40 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 2f747d6e97e2..9d733436e300 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 8b0a81294e65..4fb4108d3103 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index a1f766bf7d9b..cb32f5624a1b 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index cd2da6b7692c..0f8697618aa5 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index b398ca202dbd..042c7adfccfa 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index 95146948166f..865ed85a5760 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 -# Fri Jul 18 18:00:41 2008 +# Linux kernel version: 2.6.28 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -9,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -32,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -52,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -82,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,9 +101,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -106,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -118,48 +130,32 @@ CONFIG_BF527=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set CONFIG_BF_REV_0_1=y # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y CONFIG_MEM_MT48LC16M16A2TG_75=y -# CONFIG_BFIN527_EZKIT is not set -CONFIG_BFIN527_BLUETECHNIX_CM=y - -# -# BF527 Specific Configuration -# - -# -# Alternative Multiplexing Scheme -# -# CONFIG_BF527_SPORT0_PORTF is not set -CONFIG_BF527_SPORT0_PORTG=y -CONFIG_BF527_SPORT0_TSCLK_PG10=y -# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -CONFIG_BF527_UART1_PORTF=y -# CONFIG_BF527_UART1_PORTG is not set -# CONFIG_BF527_NAND_D_PORTF is not set -CONFIG_BF527_NAND_D_PORTH=y - -# -# Interrupt Priority Assignment -# - -# -# Priority -# CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 CONFIG_IRQ_DMAR0_BLK=7 @@ -179,7 +175,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -205,6 +200,34 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 +# CONFIG_BFIN527_EZKIT is not set +CONFIG_BFIN527_BLUETECHNIX_CM=y +# CONFIG_BFIN526_EZBRD is not set + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_SPI=10 CONFIG_IRQ_SPI_ERROR=7 CONFIG_IRQ_NFC_ERROR=7 CONFIG_IRQ_HDMA_ERROR=7 @@ -226,7 +249,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -240,10 +262,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -277,6 +299,12 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -285,10 +313,10 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y @@ -334,7 +362,6 @@ CONFIG_BANK_3=0xFFC0 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -345,25 +372,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_PM_BFIN_SLEEP_DEEPER is not set -# CONFIG_PM_BFIN_SLEEP is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -376,6 +398,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -405,8 +428,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -415,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -431,14 +453,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -456,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -464,6 +488,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -507,6 +532,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -542,10 +568,12 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -558,7 +586,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -579,6 +606,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -591,11 +619,14 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -604,6 +635,7 @@ CONFIG_BFIN_MAC_RMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -616,7 +648,6 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -642,14 +673,15 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BF5xx_EPPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -673,6 +705,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -680,44 +714,49 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_EEPROM_LEGACY is not set +# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -726,37 +765,41 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set +# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -777,6 +820,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -785,6 +829,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -792,9 +837,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -809,22 +857,32 @@ CONFIG_BFIN_WDT=y # # CONFIG_USBPCWATCHDOG is not set -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -839,10 +897,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -850,6 +904,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -860,40 +915,48 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y # -# Blackfin high speed USB support +# Blackfin high speed USB Support # CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_MUSB_LOGLEVEL=0 +CONFIG_MUSB_DMA_POLL=y +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -901,15 +964,10 @@ CONFIG_USB_MUSB_LOGLEVEL=0 # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -918,7 +976,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -934,17 +992,13 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -973,51 +1027,59 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1059,8 +1121,11 @@ CONFIG_SYSFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1068,13 +1133,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1130,7 +1194,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1138,14 +1201,61 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB_TESTCASE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1154,7 +1264,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_CPLB_INFO is not set CONFIG_ACCESS_CHECK=y @@ -1163,10 +1273,96 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_CRYPTO is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1174,6 +1370,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h index f67289a0d8d2..793581fc9556 100644 --- a/arch/blackfin/include/asm/checksum.h +++ b/arch/blackfin/include/asm/checksum.h @@ -63,23 +63,23 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { + unsigned int carry; - __asm__ ("%0 = %0 + %1;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "%0 = %0 + %2;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "%0 = %0 + %3;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "NOP;\n\t" - : "=d" (sum) - : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum) - : "CC"); + __asm__ ("%0 = %0 + %2;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + "%0 = %0 + %3;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + "%0 = %0 + %4;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + : "=d" (sum), "=&d" (carry) + : "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum) + : "CC"); return (sum); } diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h index 0889c3abb593..c31f91cc1d5d 100644 --- a/arch/blackfin/include/asm/delay.h +++ b/arch/blackfin/include/asm/delay.h @@ -13,29 +13,7 @@ static inline void __delay(unsigned long loops) { - if (ANOMALY_05000312) { - /* Interrupted loads to loop registers -> bad */ - unsigned long tmp; - __asm__ __volatile__( - "[--SP] = LC0;" - "[--SP] = LT0;" - "[--SP] = LB0;" - "LSETUP (1f,1f) LC0 = %1;" - "1: NOP;" - /* We take advantage of the fact that LC0 is 0 at - * the end of the loop. Otherwise we'd need some - * NOPs after the CLI here. - */ - "CLI %0;" - "LB0 = [SP++];" - "LT0 = [SP++];" - "LC0 = [SP++];" - "STI %0;" - : "=d" (tmp) - : "a" (loops) - ); - } else - __asm__ __volatile__ ( +__asm__ __volatile__ ( "LSETUP(1f, 1f) LC0 = %0;" "1: NOP;" : @@ -47,16 +25,15 @@ static inline void __delay(unsigned long loops) #include /* needed for HZ */ /* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) + * close approximation borrowed from m68knommu to avoid 64-bit math */ + +#define HZSCALE (268435456 / (1000000/HZ)) + static inline void udelay(unsigned long usecs) { extern unsigned long loops_per_jiffy; - __delay(usecs * loops_per_jiffy / (1000000 / HZ)); + __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); } #endif diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 9477d82fcad2..d4a082ef75b4 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -27,60 +27,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* -* Number BF537/6/4 BF561 BF533/2/1 -* BF527/5/2 -* -* GPIO_0 PF0 PF0 PF0 -* GPIO_1 PF1 PF1 PF1 -* GPIO_2 PF2 PF2 PF2 -* GPIO_3 PF3 PF3 PF3 -* GPIO_4 PF4 PF4 PF4 -* GPIO_5 PF5 PF5 PF5 -* GPIO_6 PF6 PF6 PF6 -* GPIO_7 PF7 PF7 PF7 -* GPIO_8 PF8 PF8 PF8 -* GPIO_9 PF9 PF9 PF9 -* GPIO_10 PF10 PF10 PF10 -* GPIO_11 PF11 PF11 PF11 -* GPIO_12 PF12 PF12 PF12 -* GPIO_13 PF13 PF13 PF13 -* GPIO_14 PF14 PF14 PF14 -* GPIO_15 PF15 PF15 PF15 -* GPIO_16 PG0 PF16 -* GPIO_17 PG1 PF17 -* GPIO_18 PG2 PF18 -* GPIO_19 PG3 PF19 -* GPIO_20 PG4 PF20 -* GPIO_21 PG5 PF21 -* GPIO_22 PG6 PF22 -* GPIO_23 PG7 PF23 -* GPIO_24 PG8 PF24 -* GPIO_25 PG9 PF25 -* GPIO_26 PG10 PF26 -* GPIO_27 PG11 PF27 -* GPIO_28 PG12 PF28 -* GPIO_29 PG13 PF29 -* GPIO_30 PG14 PF30 -* GPIO_31 PG15 PF31 -* GPIO_32 PH0 PF32 -* GPIO_33 PH1 PF33 -* GPIO_34 PH2 PF34 -* GPIO_35 PH3 PF35 -* GPIO_36 PH4 PF36 -* GPIO_37 PH5 PF37 -* GPIO_38 PH6 PF38 -* GPIO_39 PH7 PF39 -* GPIO_40 PH8 PF40 -* GPIO_41 PH9 PF41 -* GPIO_42 PH10 PF42 -* GPIO_43 PH11 PF43 -* GPIO_44 PH12 PF44 -* GPIO_45 PH13 PF45 -* GPIO_46 PH14 PF46 -* GPIO_47 PH15 PF47 -*/ - #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ @@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value); int bfin_gpio_get_value(unsigned gpio); void bfin_gpio_set_value(unsigned gpio, int value); -#ifndef BF548_FAMILY -#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value) -#endif - #ifdef CONFIG_GPIOLIB #include /* cansleep wrappers */ diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index 26ebac6646d8..c8b256d2ea30 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -1,32 +1,8 @@ -/* - * File: include/asm-blackfin/kgdb.h - * Based on: - * Author: Sonic Zhang +/* Blackfin KGDB header * - * Created: - * Description: + * Copyright 2005-2009 Analog Devices Inc. * - * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $ - * - * Modified: - * Copyright 2005-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __ASM_BLACKFIN_KGDB_H__ @@ -37,17 +13,18 @@ /* gdb locks */ #define KGDB_MAX_NO_CPUS 8 -/************************************************************************/ -/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/ -/* at least NUMREGBYTES*2 are needed for register packets */ -/* Longer buffer is needed to list all threads */ +/* + * BUFMAX defines the maximum number of characters in inbound/outbound buffers. + * At least NUMREGBYTES*2 are needed for register packets. + * Longer buffer is needed to list all threads. + */ #define BUFMAX 2048 /* - * Note that this register image is different from - * the register image that Linux produces at interrupt time. - * - * Linux's register image is defined by struct pt_regs in ptrace.h. + * Note that this register image is different from + * the register image that Linux produces at interrupt time. + * + * Linux's register image is defined by struct pt_regs in ptrace.h. */ enum regnames { /* Core Registers */ @@ -104,14 +81,14 @@ enum regnames { BFIN_RETX, BFIN_RETN, BFIN_RETE, - + /* Pseudo Registers */ BFIN_PC, BFIN_CC, BFIN_EXTRA1, /* Address of .text section. */ BFIN_EXTRA2, /* Address of .data section. */ BFIN_EXTRA3, /* Address of .bss section. */ - BFIN_FDPIC_EXEC, + BFIN_FDPIC_EXEC, BFIN_FDPIC_INTERP, /* MMRs */ @@ -126,7 +103,7 @@ enum regnames { static inline void arch_kgdb_breakpoint(void) { - asm(" EXCPT 2;"); + asm("EXCPT 2;"); } #define BREAK_INSTR_SIZE 2 #define CACHE_FLUSH_IS_SAFE 1 diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 255a9316ad36..61f7487fbf12 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -115,7 +115,7 @@ #define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) /* Enable SCLK Out */ -#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) #else #define mem_SDRRC CONFIG_MEM_SDRRC #define mem_SDGCTL CONFIG_MEM_SDGCTL diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index bd8d4a7efeb2..a67142740df0 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -59,6 +59,7 @@ struct blackfin_pda { /* Per-processor Data Area */ unsigned long icplb_fault_addr; unsigned long retx; unsigned long seqstat; + unsigned int __nmi_count; /* number of times NMI asserted on this CPU */ }; extern struct blackfin_pda cpu_pda[]; diff --git a/arch/blackfin/include/asm/reboot.h b/arch/blackfin/include/asm/reboot.h index 4856d62b7467..ae1e36329bec 100644 --- a/arch/blackfin/include/asm/reboot.h +++ b/arch/blackfin/include/asm/reboot.h @@ -15,6 +15,6 @@ extern void native_machine_halt(void); extern void native_machine_power_off(void); /* common reboot workarounds */ -extern void bfin_gpio_reset_spi0_ssel1(void); +extern void bfin_reset_boot_spi_cs(unsigned short pin); #endif diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 38a233374f07..4a92a86824b7 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -15,6 +15,8 @@ else obj-y += time.o endif +CFLAGS_kgdb_test.o := -mlong-calls -O0 + obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 07e02c0d1c07..8531693fb48d 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u spin_lock_irqsave(&mdma_lock, flags); + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. Do it under irq lock and + * without the anomaly version (because we are atomic already). + */ + __builtin_bfin_ssync(); + if (bfin_read_MDMA_S0_CONFIG()) while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) continue; diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 4c14331978f6..51dac55c524a 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -27,59 +27,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* -* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2 -* -* GPIO_0 PF0 PF0 PF0 PA0...PJ13 -* GPIO_1 PF1 PF1 PF1 -* GPIO_2 PF2 PF2 PF2 -* GPIO_3 PF3 PF3 PF3 -* GPIO_4 PF4 PF4 PF4 -* GPIO_5 PF5 PF5 PF5 -* GPIO_6 PF6 PF6 PF6 -* GPIO_7 PF7 PF7 PF7 -* GPIO_8 PF8 PF8 PF8 -* GPIO_9 PF9 PF9 PF9 -* GPIO_10 PF10 PF10 PF10 -* GPIO_11 PF11 PF11 PF11 -* GPIO_12 PF12 PF12 PF12 -* GPIO_13 PF13 PF13 PF13 -* GPIO_14 PF14 PF14 PF14 -* GPIO_15 PF15 PF15 PF15 -* GPIO_16 PG0 PF16 -* GPIO_17 PG1 PF17 -* GPIO_18 PG2 PF18 -* GPIO_19 PG3 PF19 -* GPIO_20 PG4 PF20 -* GPIO_21 PG5 PF21 -* GPIO_22 PG6 PF22 -* GPIO_23 PG7 PF23 -* GPIO_24 PG8 PF24 -* GPIO_25 PG9 PF25 -* GPIO_26 PG10 PF26 -* GPIO_27 PG11 PF27 -* GPIO_28 PG12 PF28 -* GPIO_29 PG13 PF29 -* GPIO_30 PG14 PF30 -* GPIO_31 PG15 PF31 -* GPIO_32 PH0 PF32 -* GPIO_33 PH1 PF33 -* GPIO_34 PH2 PF34 -* GPIO_35 PH3 PF35 -* GPIO_36 PH4 PF36 -* GPIO_37 PH5 PF37 -* GPIO_38 PH6 PF38 -* GPIO_39 PH7 PF39 -* GPIO_40 PH8 PF40 -* GPIO_41 PH9 PF41 -* GPIO_42 PH10 PF42 -* GPIO_43 PH11 PF43 -* GPIO_44 PH12 PF44 -* GPIO_45 PH13 PF45 -* GPIO_46 PH14 PF46 -* GPIO_47 PH15 PF47 -*/ - #include #include #include @@ -119,51 +66,18 @@ enum { #define AWA_DUMMY_READ(...) do { } while (0) #endif +static struct gpio_port_t * const gpio_array[] = { #if defined(BF533_FAMILY) || defined(BF538_FAMILY) -static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) FIO_FLAG_D, -}; -#endif - -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) -static struct gpio_port_t *gpio_bankb[] = { +#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) (struct gpio_port_t *) PORTFIO, (struct gpio_port_t *) PORTGIO, (struct gpio_port_t *) PORTHIO, -}; - -static unsigned short *port_fer[] = { - (unsigned short *) PORTF_FER, - (unsigned short *) PORTG_FER, - (unsigned short *) PORTH_FER, -}; -#endif - -#if defined(BF527_FAMILY) || defined(BF518_FAMILY) -static unsigned short *port_mux[] = { - (unsigned short *) PORTF_MUX, - (unsigned short *) PORTG_MUX, - (unsigned short *) PORTH_MUX, -}; - -static const -u8 pmux_offset[][16] = - {{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ - { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ - { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ - }; -#endif - -#ifdef BF561_FAMILY -static struct gpio_port_t *gpio_bankb[] = { +#elif defined(BF561_FAMILY) (struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D, -}; -#endif - -#ifdef BF548_FAMILY -static struct gpio_port_t *gpio_array[] = { +#elif defined(BF548_FAMILY) (struct gpio_port_t *)PORTA_FER, (struct gpio_port_t *)PORTB_FER, (struct gpio_port_t *)PORTC_FER, @@ -174,7 +88,39 @@ static struct gpio_port_t *gpio_array[] = { (struct gpio_port_t *)PORTH_FER, (struct gpio_port_t *)PORTI_FER, (struct gpio_port_t *)PORTJ_FER, +#else +# error no gpio arrays defined +#endif }; + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) +static unsigned short * const port_fer[] = { + (unsigned short *) PORTF_FER, + (unsigned short *) PORTG_FER, + (unsigned short *) PORTH_FER, +}; + +# if !defined(BF537_FAMILY) +static unsigned short * const port_mux[] = { + (unsigned short *) PORTF_MUX, + (unsigned short *) PORTG_MUX, + (unsigned short *) PORTH_MUX, +}; + +static const +u8 pmux_offset[][16] = { +# if defined(BF527_FAMILY) + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ + { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ +# elif defined(BF518_FAMILY) + { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ + { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ + { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ +# endif +}; +# endif + #endif static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; @@ -188,35 +134,9 @@ static struct str_ident { } str_ident[MAX_RESOURCES]; #if defined(CONFIG_PM) -#if defined(CONFIG_BF54x) static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; -#else -static unsigned short wakeup_map[GPIO_BANK_NUM]; -static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; -static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; - -#ifdef BF533_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB}; #endif -#ifdef BF537_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; -#endif - -#ifdef BF538_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB}; -#endif - -#if defined(BF527_FAMILY) || defined(BF518_FAMILY) -static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; -#endif - -#ifdef BF561_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; -#endif -#endif -#endif /* CONFIG_PM */ - inline int check_gpio(unsigned gpio) { #if defined(BF548_FAMILY) @@ -330,9 +250,10 @@ static struct { {.res = P_SPI0_SSEL3, .offset = 0}, }; -static void portmux_setup(unsigned short per, unsigned short function) +static void portmux_setup(unsigned short per) { u16 y, offset, muxreg; + u16 function = P_FUNCT2MUX(per); for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { if (port_mux_lut[y].res == per) { @@ -353,30 +274,33 @@ static void portmux_setup(unsigned short per, unsigned short function) } } #elif defined(BF548_FAMILY) -inline void portmux_setup(unsigned short portno, unsigned short function) +inline void portmux_setup(unsigned short per) { u32 pmux; + u16 ident = P_IDENT(per); + u16 function = P_FUNCT2MUX(per); - pmux = gpio_array[gpio_bank(portno)]->port_mux; + pmux = gpio_array[gpio_bank(ident)]->port_mux; - pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); + pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); - gpio_array[gpio_bank(portno)]->port_mux = pmux; + gpio_array[gpio_bank(ident)]->port_mux = pmux; } -inline u16 get_portmux(unsigned short portno) +inline u16 get_portmux(unsigned short per) { u32 pmux; + u16 ident = P_IDENT(per); - pmux = gpio_array[gpio_bank(portno)]->port_mux; + pmux = gpio_array[gpio_bank(ident)]->port_mux; - return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); + return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); } #elif defined(BF527_FAMILY) || defined(BF518_FAMILY) -inline void portmux_setup(unsigned short portno, unsigned short function) +inline void portmux_setup(unsigned short per) { - u16 pmux, ident = P_IDENT(portno); + u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per); u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; pmux = *port_mux[gpio_bank(ident)]; @@ -424,90 +348,71 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ unsigned long flags; \ local_irq_save_hw(flags); \ if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ - gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ AWA_DUMMY_READ(name); \ local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); -SET_GPIO(dir) -SET_GPIO(inen) -SET_GPIO(polar) -SET_GPIO(edge) -SET_GPIO(both) +SET_GPIO(dir) /* set_gpio_dir() */ +SET_GPIO(inen) /* set_gpio_inen() */ +SET_GPIO(polar) /* set_gpio_polar() */ +SET_GPIO(edge) /* set_gpio_edge() */ +SET_GPIO(both) /* set_gpio_both() */ -#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_SC(name) \ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ - gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ } \ EXPORT_SYMBOL(set_gpio_ ## name); -#else -#define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ -{ \ - if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ - else \ - gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ -} \ -EXPORT_SYMBOL(set_gpio_ ## name); -#endif SET_GPIO_SC(maska) SET_GPIO_SC(maskb) SET_GPIO_SC(data) -#if ANOMALY_05000311 || ANOMALY_05000323 void set_gpio_toggle(unsigned gpio) { unsigned long flags; - local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); - AWA_DUMMY_READ(toggle); - local_irq_restore_hw(flags); + if (ANOMALY_05000311 || ANOMALY_05000323) + local_irq_save_hw(flags); + gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + if (ANOMALY_05000311 || ANOMALY_05000323) { + AWA_DUMMY_READ(toggle); + local_irq_restore_hw(flags); + } } -#else -void set_gpio_toggle(unsigned gpio) -{ - gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); -} -#endif EXPORT_SYMBOL(set_gpio_toggle); /*Set current PORT date (16-bit word)*/ -#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save_hw(flags); \ - gpio_bankb[gpio_bank(gpio)]->name = arg; \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + gpio_array[gpio_bank(gpio)]->name = arg; \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); -#else -#define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ -{ \ - gpio_bankb[gpio_bank(gpio)]->name = arg; \ -} \ -EXPORT_SYMBOL(set_gpiop_ ## name); -#endif SET_GPIO_P(data) SET_GPIO_P(dir) @@ -519,27 +424,21 @@ SET_GPIO_P(maska) SET_GPIO_P(maskb) /* Get a specific bit */ -#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO(name) \ unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save_hw(flags); \ - ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ return ret; \ } \ EXPORT_SYMBOL(get_gpio_ ## name); -#else -#define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned gpio) \ -{ \ - return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ -} \ -EXPORT_SYMBOL(get_gpio_ ## name); -#endif GET_GPIO(data) GET_GPIO(dir) @@ -552,27 +451,21 @@ GET_GPIO(maskb) /*Get current PORT date (16-bit word)*/ -#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO_P(name) \ unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save_hw(flags); \ - ret = (gpio_bankb[gpio_bank(gpio)]->name); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + ret = (gpio_array[gpio_bank(gpio)]->name); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ return ret; \ } \ EXPORT_SYMBOL(get_gpiop_ ## name); -#else -#define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned gpio) \ -{ \ - return (gpio_bankb[gpio_bank(gpio)]->name);\ -} \ -EXPORT_SYMBOL(get_gpiop_ ## name); -#endif GET_GPIO_P(data) GET_GPIO_P(dir) @@ -585,6 +478,26 @@ GET_GPIO_P(maskb) #ifdef CONFIG_PM + +static unsigned short wakeup_map[GPIO_BANK_NUM]; +static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; + +static const unsigned int sic_iwr_irqs[] = { +#if defined(BF533_FAMILY) + IRQ_PROG_INTB +#elif defined(BF537_FAMILY) + IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX +#elif defined(BF538_FAMILY) + IRQ_PORTF_INTB +#elif defined(BF527_FAMILY) || defined(BF518_FAMILY) + IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB +#elif defined(BF561_FAMILY) + IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB +#else +# error no SIC_IWR defined +#endif +}; + /*********************************************************** * * FUNCTIONS: Blackfin PM Setup API @@ -669,18 +582,18 @@ u32 bfin_pm_standby_setup(void) mask = wakeup_map[gpio_bank(i)]; bank = gpio_bank(i); - gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb; - gpio_bankb[bank]->maskb = 0; + gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb; + gpio_array[bank]->maskb = 0; if (mask) { #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; #endif - gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; - gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; - gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; - gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; - gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].polar = gpio_array[bank]->polar; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir; + gpio_bank_saved[bank].edge = gpio_array[bank]->edge; + gpio_bank_saved[bank].both = gpio_array[bank]->both; gpio_bank_saved[bank].reserved = reserved_gpio_map[bank]; @@ -700,7 +613,7 @@ u32 bfin_pm_standby_setup(void) } bfin_internal_set_wake(sic_iwr_irqs[bank], 1); - gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)]; + gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)]; } } @@ -721,18 +634,18 @@ void bfin_pm_standby_restore(void) #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; - gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; - gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; - gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; - gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir = gpio_bank_saved[bank].dir; + gpio_array[bank]->polar = gpio_bank_saved[bank].polar; + gpio_array[bank]->edge = gpio_bank_saved[bank].edge; + gpio_array[bank]->both = gpio_bank_saved[bank].both; reserved_gpio_map[bank] = gpio_bank_saved[bank].reserved; bfin_internal_set_wake(sic_iwr_irqs[bank], 0); } - gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; + gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb; } AWA_DUMMY_READ(maskb); } @@ -745,21 +658,21 @@ void bfin_gpio_pm_hibernate_suspend(void) bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].fer = *port_fer[bank]; + gpio_bank_saved[bank].fer = *port_fer[bank]; #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].mux = *port_mux[bank]; + gpio_bank_saved[bank].mux = *port_mux[bank]; #else - if (bank == 0) - gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); + if (bank == 0) + gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); #endif #endif - gpio_bank_saved[bank].data = gpio_bankb[bank]->data; - gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; - gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; - gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; - gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; - gpio_bank_saved[bank].both = gpio_bankb[bank]->both; - gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].polar = gpio_array[bank]->polar; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir; + gpio_bank_saved[bank].edge = gpio_array[bank]->edge; + gpio_bank_saved[bank].both = gpio_array[bank]->both; + gpio_bank_saved[bank].maska = gpio_array[bank]->maska; } AWA_DUMMY_READ(maska); @@ -770,27 +683,27 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); + bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - *port_mux[bank] = gpio_bank_saved[bank].mux; + *port_mux[bank] = gpio_bank_saved[bank].mux; #else - if (bank == 0) - bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); + if (bank == 0) + bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); #endif - *port_fer[bank] = gpio_bank_saved[bank].fer; + *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; - gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; - gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; - gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; - gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir = gpio_bank_saved[bank].dir; + gpio_array[bank]->polar = gpio_bank_saved[bank].polar; + gpio_array[bank]->edge = gpio_bank_saved[bank].edge; + gpio_array[bank]->both = gpio_bank_saved[bank].both; - gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; - gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska; + gpio_array[bank]->maska = gpio_bank_saved[bank].maska; } AWA_DUMMY_READ(maska); } @@ -817,12 +730,12 @@ void bfin_gpio_pm_hibernate_suspend(void) for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); - gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; - gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; - gpio_bank_saved[bank].data = gpio_array[bank]->port_data; - gpio_bank_saved[bank].data = gpio_array[bank]->port_data; - gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen; - gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set; + gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; + gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; } } @@ -831,21 +744,21 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); + bank = gpio_bank(i); - gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; - gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; - gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir; - gpio_array[bank]->port_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; + gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; } } #endif unsigned short get_gpio_dir(unsigned gpio) { - return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); + return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); } EXPORT_SYMBOL(get_gpio_dir); @@ -905,9 +818,7 @@ int peripheral_request(unsigned short per, const char *label) */ #ifdef BF548_FAMILY - u16 funct = get_portmux(ident); - - if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { + if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { #else if (!(per & P_MAYSHARE)) { #endif @@ -931,11 +842,7 @@ int peripheral_request(unsigned short per, const char *label) anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); -#ifdef BF548_FAMILY - portmux_setup(ident, P_FUNCT2MUX(per)); -#else - portmux_setup(per, P_FUNCT2MUX(per)); -#endif + portmux_setup(per); port_setup(ident, PERIPHERAL_USAGE); local_irq_restore_hw(flags); @@ -977,9 +884,6 @@ void peripheral_free(unsigned short per) if (!(per & P_DEFINED)) return; - if (check_gpio(ident) < 0) - return; - local_irq_save_hw(flags); if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { @@ -1056,9 +960,15 @@ int bfin_gpio_request(unsigned gpio, const char *label) local_irq_restore_hw(flags); return -EBUSY; } - if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) + if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); + } +#ifndef BF548_FAMILY + else { /* Reset POLAR setting when acquiring a gpio for the first time */ + set_gpio_polar(gpio, 0); + } +#endif reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); set_label(gpio, label); @@ -1078,6 +988,8 @@ void bfin_gpio_free(unsigned gpio) if (check_gpio(gpio) < 0) return; + might_sleep(); + local_irq_save_hw(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { @@ -1158,92 +1070,15 @@ void bfin_gpio_irq_free(unsigned gpio) local_irq_restore_hw(flags); } - +static inline void __bfin_gpio_direction_input(unsigned gpio) +{ #ifdef BF548_FAMILY -int bfin_gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } - - local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore_hw(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_input); - -int bfin_gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } - - local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); - gpio_set_value(gpio, value); - gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); - local_irq_restore_hw(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_output); - -void bfin_gpio_set_value(unsigned gpio, int arg) -{ - if (arg) - gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); -} -EXPORT_SYMBOL(bfin_gpio_set_value); - -int bfin_gpio_get_value(unsigned gpio) -{ - return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(bfin_gpio_get_value); - -void bfin_gpio_irq_prepare(unsigned gpio) -{ - unsigned long flags; - - port_setup(gpio, GPIO_USAGE); - - local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore_hw(flags); -} - + gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); #else - -int bfin_gpio_get_value(unsigned gpio) -{ - unsigned long flags; - int ret; - - if (unlikely(get_gpio_edge(gpio))) { - local_irq_save_hw(flags); - set_gpio_edge(gpio, 0); - ret = get_gpio_data(gpio); - set_gpio_edge(gpio, 1); - local_irq_restore_hw(flags); - - return ret; - } else - return get_gpio_data(gpio); + gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); +#endif + gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); } -EXPORT_SYMBOL(bfin_gpio_get_value); - int bfin_gpio_direction_input(unsigned gpio) { @@ -1255,8 +1090,7 @@ int bfin_gpio_direction_input(unsigned gpio) } local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); - gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); + __bfin_gpio_direction_input(gpio); AWA_DUMMY_READ(inen); local_irq_restore_hw(flags); @@ -1264,6 +1098,30 @@ int bfin_gpio_direction_input(unsigned gpio) } EXPORT_SYMBOL(bfin_gpio_direction_input); +void bfin_gpio_irq_prepare(unsigned gpio) +{ +#ifdef BF548_FAMILY + unsigned long flags; +#endif + + port_setup(gpio, GPIO_USAGE); + +#ifdef BF548_FAMILY + local_irq_save_hw(flags); + __bfin_gpio_direction_input(gpio); + local_irq_restore_hw(flags); +#endif +} + +void bfin_gpio_set_value(unsigned gpio, int arg) +{ + if (arg) + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); +} +EXPORT_SYMBOL(bfin_gpio_set_value); + int bfin_gpio_direction_output(unsigned gpio, int value) { unsigned long flags; @@ -1274,14 +1132,15 @@ int bfin_gpio_direction_output(unsigned gpio, int value) } local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); - if (value) - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); - else - gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); +#ifdef BF548_FAMILY + gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); +#endif - gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); AWA_DUMMY_READ(dir); local_irq_restore_hw(flags); @@ -1289,6 +1148,27 @@ int bfin_gpio_direction_output(unsigned gpio, int value) } EXPORT_SYMBOL(bfin_gpio_direction_output); +int bfin_gpio_get_value(unsigned gpio) +{ +#ifdef BF548_FAMILY + return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); +#else + unsigned long flags; + + if (unlikely(get_gpio_edge(gpio))) { + int ret; + local_irq_save_hw(flags); + set_gpio_edge(gpio, 0); + ret = get_gpio_data(gpio); + set_gpio_edge(gpio, 1); + local_irq_restore_hw(flags); + return ret; + } else + return get_gpio_data(gpio); +#endif +} +EXPORT_SYMBOL(bfin_gpio_get_value); + /* If we are booting from SPI and our board lacks a strong enough pull up, * the core can reset and execute the bootrom faster than the resistor can * pull the signal logically high. To work around this (common) error in @@ -1299,23 +1179,15 @@ EXPORT_SYMBOL(bfin_gpio_direction_output); * lives here as we need to force all the GPIO states w/out going through * BUG() checks and such. */ -void bfin_gpio_reset_spi0_ssel1(void) +void bfin_reset_boot_spi_cs(unsigned short pin) { - u16 gpio = P_IDENT(P_SPI0_SSEL1); - + unsigned short gpio = P_IDENT(pin); port_setup(gpio, GPIO_USAGE); - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); AWA_DUMMY_READ(data_set); udelay(1); } -void bfin_gpio_irq_prepare(unsigned gpio) -{ - port_setup(gpio, GPIO_USAGE); -} - -#endif /*BF548_FAMILY */ - #if defined(CONFIG_PROC_FS) static int gpio_proc_read(char *buf, char **start, off_t offset, int len, int *unused_i, void *unused_v) @@ -1369,11 +1241,7 @@ int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) { -#ifdef BF548_FAMILY return bfin_gpio_set_value(gpio, value); -#else - return set_gpio_data(gpio, value); -#endif } int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index bdb958486e76..3e329a6ce041 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) dcplb_tbl[cpu][i_d].addr = 0; dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; -#if 0 icplb_tbl[cpu][i_i].addr = 0; - icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; -#endif + icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB; /* Cover kernel memory with 4M pages. */ addr = 0; diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index 376249ab2694..8cbb47c7b663 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu) nr_icplb_supv_miss[cpu]++; base = 0; - for (idx = 0; idx < icplb_nr_bounds; idx++) { + idx = 0; + do { eaddr = icplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } + } while (++idx < icplb_nr_bounds); + if (unlikely(idx == icplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; @@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu) nr_dcplb_supv_miss[cpu]++; base = 0; - for (idx = 0; idx < dcplb_nr_bounds; idx++) { + idx = 0; + do { eaddr = dcplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } + } while (++idx < dcplb_nr_bounds); + if (unlikely(idx == dcplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 5780d6df1542..23e9aa080710 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -35,6 +35,7 @@ #include #include #include +#include static atomic_t irq_err_count; static spinlock_t irq_controller_lock; @@ -96,8 +97,13 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) + } else if (i == NR_IRQS) { + seq_printf(p, "NMI: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); + seq_printf(p, " CORE Non Maskable Interrupt\n"); seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); + } return 0; } diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index eeee8cb43360..53d08dee8531 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -20,8 +20,8 @@ * reset while the Core B bit (on dual core parts) is cleared by * the core reset. */ -__attribute__((l1_text)) -static void _bfin_reset(void) +__attribute__ ((__l1_text__, __noreturn__)) +static void bfin_reset(void) { /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as @@ -30,7 +30,11 @@ static void _bfin_reset(void) */ __builtin_bfin_ssync(); - while (1) { + /* The bootrom checks to see how it was reset and will + * automatically perform a software reset for us when + * it starts executing after the core reset. + */ + if (ANOMALY_05000353 || ANOMALY_05000386) { /* Initiate System software reset. */ bfin_write_SWRST(0x7); @@ -50,6 +54,11 @@ static void _bfin_reset(void) /* Clear System software reset */ bfin_write_SWRST(0); + /* The BF526 ROM will crash during reset */ +#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) + bfin_read_SWRST(); +#endif + /* Wait for the SWRST write to complete. Cannot rely on SSYNC * though as the System state is all reset now. */ @@ -60,22 +69,11 @@ static void _bfin_reset(void) : "a" (15 * 1) : "LC1", "LB1", "LT1" ); + } + while (1) /* Issue core reset */ asm("raise 1"); - } -} - -static void bfin_reset(void) -{ - if (ANOMALY_05000353 || ANOMALY_05000386) - _bfin_reset(); - else - /* the bootrom checks to see how it was reset and will - * automatically perform a software reset for us when - * it starts executing boot - */ - asm("raise 1;"); } __attribute__((weak)) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index b2a811347b65..e5c116230800 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat, #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ #define BFIN_MEMMAP_RAM 1 #define BFIN_MEMMAP_RESERVED 2 -struct bfin_memmap { +static struct bfin_memmap { int nr_map; struct bfin_memmap_entry { unsigned long long addr; /* start of memory segment */ @@ -824,7 +824,15 @@ void __init setup_arch(char **cmdline_p) flash_probe(); #endif + printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); + + /* Newer parts mirror SWRST bits in SYSCR */ +#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \ + defined(CONFIG_BF538) || defined(CONFIG_BF539) _bfin_swrst = bfin_read_SWRST(); +#else + _bfin_swrst = bfin_read_SYSCR(); +#endif #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT); @@ -853,7 +861,7 @@ void __init setup_arch(char **cmdline_p) else if (_bfin_swrst & RESET_SOFTWARE) printk(KERN_NOTICE "Reset caused by Software reset\n"); - printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n"); + printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); else if (bfin_compiled_revid() == -1) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 5b0667da8d05..ffe7fb53eccb 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -673,6 +673,14 @@ static void decode_instruction(unsigned short *address) verbose_printk("RTI"); else if (opcode == 0x0012) verbose_printk("RTX"); + else if (opcode == 0x0013) + verbose_printk("RTN"); + else if (opcode == 0x0014) + verbose_printk("RTE"); + else if (opcode == 0x0025) + verbose_printk("EMUEXCPT"); + else if (opcode == 0x0040 && opcode <= 0x0047) + verbose_printk("STI R%i", opcode & 7); else if (opcode >= 0x0050 && opcode <= 0x0057) verbose_printk("JUMP (P%i)", opcode & 7); else if (opcode >= 0x0060 && opcode <= 0x0067) @@ -681,6 +689,10 @@ static void decode_instruction(unsigned short *address) verbose_printk("CALL (PC+P%i)", opcode & 7); else if (opcode >= 0x0080 && opcode <= 0x0087) verbose_printk("JUMP (PC+P%i)", opcode & 7); + else if (opcode >= 0x0090 && opcode <= 0x009F) + verbose_printk("RAISE 0x%x", opcode & 0xF); + else if (opcode >= 0x00A0 && opcode <= 0x00AF) + verbose_printk("EXCPT 0x%x", opcode & 0xF); else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) verbose_printk("IF !CC JUMP"); else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) @@ -820,11 +832,8 @@ void show_stack(struct task_struct *task, unsigned long *stack) decode_address(buf, (unsigned int)stack); printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); - addr = (unsigned int *)((unsigned int)stack & ~0x3F); - /* First thing is to look for a frame pointer */ - for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; - addr < endstack; addr++, i++) { + for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) { if (*addr & 0x1) continue; ins_addr = (unsigned short *)*addr; @@ -834,7 +843,8 @@ void show_stack(struct task_struct *task, unsigned long *stack) if (fp) { /* Let's check to see if it is a frame pointer */ - while (fp >= (addr - 1) && fp < endstack && fp) + while (fp >= (addr - 1) && fp < endstack + && fp && ((unsigned int) fp & 0x3) == 0) fp = (unsigned int *)*fp; if (fp == 0 || fp == endstack) { fp = addr - 1; @@ -1052,8 +1062,9 @@ void show_regs(struct pt_regs *fp) char buf [150]; struct irqaction *action; unsigned int i; - unsigned long flags; + unsigned long flags = 0; unsigned int cpu = smp_processor_id(); + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", @@ -1073,17 +1084,22 @@ void show_regs(struct pt_regs *fp) } verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", fp->seqstat & SEQSTAT_EXCAUSE); - for (i = 6; i <= 15 ; i++) { + for (i = 2; i <= 15 ; i++) { if (fp->ipend & (1 << i)) { - decode_address(buf, bfin_read32(EVT0 + 4*i)); - verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + if (i != 4) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + } else + verbose_printk(KERN_NOTICE " interrupts disabled\n"); } } /* if no interrupts are going off, don't print this out */ if (fp->ipend & ~0x3F) { for (i = 0; i < (NR_IRQS - 1); i++) { - spin_lock_irqsave(&irq_desc[i].lock, flags); + if (!in_atomic) + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; if (!action) goto unlock; @@ -1096,7 +1112,8 @@ void show_regs(struct pt_regs *fp) } verbose_printk("\n"); unlock: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); + if (!in_atomic) + spin_unlock_irqrestore(&irq_desc[i].lock, flags); } } diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 15f1351c8645..0e175342112e 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -46,6 +46,7 @@ #include #include #include +#include /* * Name the Board for the /proc/cpuinfo @@ -104,8 +105,31 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, +}; +#endif + +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +static struct dsa_platform_data ksz8893m_switch_data = { + .mii_bus = &bfin_mii_bus.dev, + .netdev = &bfin_mac_device.dev, + .port_names[0] = NULL, + .port_names[1] = "eth%d", + .port_names[2] = "eth%d", + .port_names[3] = "cpu", +}; + +static struct platform_device ksz8893m_switch_device = { + .name = "dsa", + .id = 0, + .num_resources = 0, + .dev.platform_data = &ksz8893m_switch_data, }; #endif @@ -147,6 +171,15 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) \ + || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +/* SPI SWITCH CHIP */ +static struct bfin5xx_spi_chip spi_switch_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { .enable_dma = 1, @@ -226,6 +259,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) \ + || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) + { + .modalias = "ksz8893m", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = NULL, + .controller_data = &spi_switch_info, + .mode = SPI_MODE_3, + }, +#endif + #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { .modalias = "spi_mmc_dummy", @@ -473,7 +519,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -487,7 +532,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -584,9 +628,14 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) + &ksz8893m_switch_device, +#endif + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, &bfin_spi1_device, @@ -632,12 +681,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init ezbrd_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; @@ -649,7 +694,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index ac16d54734d4..f618b487b2b0 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -103,6 +103,8 @@ #define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) #define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 + /* SPORT Port Mux */ #define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) #define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index a2c3578f4b6c..856c097b5317 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -403,8 +403,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -793,7 +798,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -809,7 +813,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -920,6 +923,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -968,27 +972,23 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init cm_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(stamp_init); +arch_initcall(cm_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 0314bd3355eb..83606fcdde27 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -208,8 +208,13 @@ static struct platform_device rtc_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -590,7 +595,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -604,7 +608,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -720,6 +723,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -764,27 +768,23 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init ezbrd_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(stamp_init); +arch_initcall(ezbrd_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 9454fb7b18c3..d0864111ef59 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -425,8 +425,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -830,7 +835,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -844,7 +848,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -988,6 +991,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -1048,27 +1052,23 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(stamp_init); +arch_initcall(ezkit_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h index 7f6da2c386bb..72b1652be4da 100644 --- a/arch/blackfin/mach-bf527/include/mach/portmux.h +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -73,6 +73,8 @@ #define P_HWAIT (P_DONTCARE) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 + #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 6ee607c259ac..015c18f85e7f 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; -#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -390,10 +388,8 @@ static int __init blackstamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 07f9ad1e189c..db96f33f72e2 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -550,10 +548,8 @@ static int __init stamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h index 685a2651dcda..2f59ce0b0cb5 100644 --- a/arch/blackfin/mach-bf533/include/mach/portmux.h +++ b/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -54,14 +54,11 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #define P_TMR2 (P_DONTCARE) #define P_TMR1 (P_DONTCARE) #define P_TMR0 (P_DONTCARE) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) - - - - #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 6ac8e4d5bd38..9cd8fb2a30d3 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -479,8 +479,13 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -591,6 +596,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index dd6e6bfb98ea..da710fdc4569 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -262,8 +262,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -662,6 +667,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -708,7 +714,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init stamp_init(void) +static int __init generic_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -720,13 +726,13 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(generic_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index bb795341cb17..db7d3a385e4b 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -61,8 +61,13 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -324,6 +329,7 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -377,5 +383,5 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 89de94f4545d..590eb3a139b7 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -198,8 +198,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -529,6 +534,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -558,7 +564,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init stamp_init(void) +static int __init pnav_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -569,7 +575,7 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(pnav_init); void bfin_get_ether_addr(char *addr) { diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index d812e2514a2f..cd04c5e44878 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -321,8 +321,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -1068,7 +1073,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -1102,7 +1106,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -1217,6 +1220,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -1284,12 +1288,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - bfin_plat_nand_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); @@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } /* diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 2f4b066153c5..3f4f203a06ec 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -481,8 +481,13 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -593,6 +598,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -615,7 +621,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_gpios_device, }; -static int __init cm_bf537_init(void) +static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); @@ -629,7 +635,7 @@ static int __init cm_bf537_init(void) return 0; } -arch_initcall(cm_bf537_init); +arch_initcall(tcm_bf537_init); void bfin_get_ether_addr(char *addr) { diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h index 78fee6e0f237..87285e75e903 100644 --- a/arch/blackfin/mach-bf537/include/mach/portmux.h +++ b/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -31,6 +31,7 @@ #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) #define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) #define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h index 1e031b588b47..c8db264e3e4d 100644 --- a/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -102,5 +102,6 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 309c16014cae..096e661700a7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { }; @@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { #endif }; #endif -#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -956,13 +954,11 @@ static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ i2c_register_board_info(1, bfin_i2c_board_info1, ARRAY_SIZE(bfin_i2c_board_info1)); -#endif #endif platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 3b5430999f4f..23d03c52f4b4 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -175,6 +175,7 @@ #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h index f0e569984810..cd31f72bdd82 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -104,6 +104,18 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) +#if defined(CONFIG_BF542M) +# define CONFIG_BF542 +#elif defined(CONFIG_BF544M) +# define CONFIG_BF544 +#elif defined(CONFIG_BF547M) +# define CONFIG_BF547 +#elif defined(CONFIG_BF548M) +# define CONFIG_BF548 +#elif defined(CONFIG_BF549M) +# define CONFIG_BF549 +#endif + #if defined(CONFIG_BF542) # define CPU "BF542" # define CPUID 0x27de diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index bba82dc75f16..3a2051709787 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -195,17 +195,17 @@ struct gpio_port_t { unsigned short port_fer; unsigned short dummy1; - unsigned short port_data; + unsigned short data; unsigned short dummy2; - unsigned short port_set; + unsigned short data_set; unsigned short dummy3; - unsigned short port_clear; + unsigned short data_clear; unsigned short dummy4; - unsigned short port_dir_set; + unsigned short dir_set; unsigned short dummy5; - unsigned short port_dir_clear; + unsigned short dir_clear; unsigned short dummy6; - unsigned short port_inen; + unsigned short inen; unsigned short dummy7; unsigned int port_mux; }; diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index 8177a567dcdb..ffb1d0a44b4d 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -125,6 +125,7 @@ #define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) #define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) #define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) #define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index d7c509759659..cf922295f4ce 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -1106,6 +1106,8 @@ #define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ /* PPI_STATUS Masks */ #define FLD 0x00000400 /* Field Indicator */ diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h index a6ee8206efb6..2e5ad6347dea 100644 --- a/arch/blackfin/mach-bf561/include/mach/portmux.h +++ b/arch/blackfin/mach-bf561/include/mach/portmux.h @@ -85,5 +85,6 @@ #define P_SPI0_MOSI (P_DONTCARE) #define P_SPI0_MISO (P_DONTCARE) #define P_SPI0_SCK (P_DONTCARE) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 5d182abefc7b..9dddb6f8cc85 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -14,6 +14,7 @@ #include #include +#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) @@ -76,7 +77,7 @@ void init_clocks(void) bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); #ifdef EBIU_SDGCTL bfin_write_EBIU_SDRRC(mem_SDRRC); - bfin_write_EBIU_SDGCTL(mem_SDGCTL); + bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL); #else bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); do_sync(); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index fae774651374..88de053bbe8e 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -151,13 +151,6 @@ ENTRY(_ex_syscall) jump.s _bfin_return_from_exception; ENDPROC(_ex_syscall) -ENTRY(_ex_soft_bp) - r7 = retx; - r7 += -2; - retx = r7; - jump.s _ex_trap_c; -ENDPROC(_ex_soft_bp) - ENTRY(_ex_single_step) /* If we just returned from an interrupt, the single step event is for the RTI instruction. */ @@ -1087,7 +1080,7 @@ ENTRY(_ex_table) * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined */ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ - .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ + .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */ #ifdef CONFIG_KGDB .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection and break signal trap */ diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index e1e42c029e15..698d4c05947e 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -17,6 +17,19 @@ __INIT +ENTRY(__init_clear_bss) + r2 = r2 - r1; + cc = r2 == 0; + if cc jump .L_bss_done; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (1f, 1f) lc0 = p2; +1: [p1++] = r0; +.L_bss_done: + rts; +ENDPROC(__init_clear_bss) + #define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) ENTRY(__start) @@ -144,6 +157,35 @@ ENTRY(__start) call _init_early_exception_vectors; #endif + r0 = 0 (x); + /* Zero out all of the fun bss regions */ +#if L1_DATA_A_LENGTH > 0 + r1.l = __sbss_l1; + r1.h = __sbss_l1; + r2.l = __ebss_l1; + r2.h = __ebss_l1; + call __init_clear_bss +#endif +#if L1_DATA_B_LENGTH > 0 + r1.l = __sbss_b_l1; + r1.h = __sbss_b_l1; + r2.l = __ebss_b_l1; + r2.h = __ebss_b_l1; + call __init_clear_bss +#endif +#if L2_LENGTH > 0 + r1.l = __sbss_l2; + r1.h = __sbss_l2; + r2.l = __ebss_l2; + r2.h = __ebss_l2; + call __init_clear_bss +#endif + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + call __init_clear_bss + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; #ifdef CONFIG_BFIN_KERNEL_CLOCK @@ -185,19 +227,6 @@ ENDPROC(__start) # define WDOG_CTL WDOGA_CTL #endif -ENTRY(__init_clear_bss) - r2 = r2 - r1; - cc = r2 == 0; - if cc jump .L_bss_done; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (1f, 1f) lc0 = p2; -1: [p1++] = r0; -.L_bss_done: - rts; -ENDPROC(__init_clear_bss) - ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; @@ -209,35 +238,6 @@ ENTRY(_real_start) w[p0] = r0; ssync; - r0 = 0 (x); - /* Zero out all of the fun bss regions */ -#if L1_DATA_A_LENGTH > 0 - r1.l = __sbss_l1; - r1.h = __sbss_l1; - r2.l = __ebss_l1; - r2.h = __ebss_l1; - call __init_clear_bss -#endif -#if L1_DATA_B_LENGTH > 0 - r1.l = __sbss_b_l1; - r1.h = __sbss_b_l1; - r2.l = __ebss_b_l1; - r2.h = __ebss_b_l1; - call __init_clear_bss -#endif -#if L2_LENGTH > 0 - r1.l = __sbss_l2; - r1.h = __sbss_l2; - r2.l = __ebss_l2; - r2.h = __ebss_l2; - call __init_clear_bss -#endif - r1.l = ___bss_start; - r1.h = ___bss_start; - r2.l = ___bss_stop; - r2.h = ___bss_stop; - call __init_clear_bss - /* Pass the u-boot arguments to the global value command line */ R0 = R7; call _cmdline_init; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 473df0f7fa78..43c4eb9acb65 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: - * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi + * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi */ ENTRY(_evt_nmi) .weak _evt_nmi diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 1bba6030dce9..202494568c6c 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1101,10 +1101,9 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ - || defined(BF538_FAMILY) || defined(CONFIG_BF51x) +#ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) +# ifdef SIC_IWR1 /* BF52x/BF51x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -1114,10 +1113,8 @@ int __init init_arch_irq(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#else - bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#endif -# ifdef CONFIG_BF54x +# endif +# ifdef SIC_IWR2 bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index d3d70fd67c16..f48a6aebb49b 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -82,10 +82,9 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \ - defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x) +#ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) +# ifdef SIC_IWR1 /* BF52x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -95,10 +94,8 @@ void bfin_pm_suspend_standby_enter(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#else - bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#endif -# ifdef CONFIG_BF54x +# endif +# ifdef SIC_IWR2 bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c index c5a214026a77..d0223abbbbd4 100644 --- a/arch/ia64/sn/kernel/io_acpi_init.c +++ b/arch/ia64/sn/kernel/io_acpi_init.c @@ -443,7 +443,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev) size = pci_resource_len(dev, PCI_ROM_RESOURCE); addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE], size); - image_size = pci_get_rom_size(addr, size); + image_size = pci_get_rom_size(dev, addr, size); dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr; dev->resource[PCI_ROM_RESOURCE].end = (unsigned long) addr + image_size - 1; diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 4e1801bad83a..e2eb2da60f96 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -269,7 +269,7 @@ sn_io_slot_fixup(struct pci_dev *dev) rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE), size + 1); - image_size = pci_get_rom_size(rom, size + 1); + image_size = pci_get_rom_size(dev, rom, size + 1); dev->resource[PCI_ROM_RESOURCE].end = dev->resource[PCI_ROM_RESOURCE].start + image_size - 1; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 52c80c2a57f2..600eef3f3ac7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -351,7 +351,7 @@ config SGI_IP27 select ARC64 select BOOT_ELF64 select DEFAULT_SGI_PARTITION - select DMA_IP27 + select DMA_COHERENT select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI select NR_CPUS_DEFAULT_64 @@ -761,9 +761,6 @@ config CFE config DMA_COHERENT bool -config DMA_IP27 - bool - config DMA_NONCOHERENT bool select DMA_NEED_PCI_MAP_STATE @@ -1368,7 +1365,7 @@ config CPU_SUPPORTS_64BIT_KERNEL # config HARDWARE_WATCHPOINTS bool - default y if CPU_MIPS32 || CPU_MIPS64 + default y if CPU_MIPSR1 || CPU_MIPSR2 menu "Kernel type" diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 32880146cbc1..6fd441d16af5 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -89,7 +89,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { .irq = AU1000_RTC_MATCH2_INT, .set_next_event = au1x_rtcmatch2_set_next_event, .set_mode = au1x_rtcmatch2_set_mode, - .cpumask = CPU_MASK_ALL, + .cpumask = CPU_MASK_ALL_PTR, }; static struct irqaction au1x_rtcmatch2_irqaction = { diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index e085feddb4a4..5f4e49ba4713 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -15,13 +15,11 @@ #include #include #include /* for memset */ -#include #include #include #include #include #include -#include #include #include diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 34ea319be94c..f2baea3039bb 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -53,7 +53,7 @@ CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARC=y -CONFIG_DMA_IP27=y +CONFIG_DMA_COHERENT=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_NO_IOPORT is not set diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index c996c3b4d074..1b332e15ab52 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -50,7 +50,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -62,7 +62,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -95,7 +95,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) static __inline__ void atomic_sub(int i, atomic_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -107,7 +107,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -135,12 +135,12 @@ static __inline__ void atomic_sub(int i, atomic_t * v) */ static __inline__ int atomic_add_return(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -154,7 +154,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -187,12 +187,12 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) static __inline__ int atomic_sub_return(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -206,7 +206,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -247,12 +247,12 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) */ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) { - unsigned long result; + int result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -270,7 +270,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + int temp; __asm__ __volatile__( " .set mips3 \n" @@ -429,7 +429,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) static __inline__ void atomic64_add(long i, atomic64_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -441,7 +441,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -474,7 +474,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) static __inline__ void atomic64_sub(long i, atomic64_t * v) { if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -486,7 +486,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -514,12 +514,12 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) */ static __inline__ long atomic64_add_return(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -533,7 +533,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -566,12 +566,12 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) static __inline__ long atomic64_sub_return(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -585,7 +585,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -626,12 +626,12 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) */ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) { - unsigned long result; + long result; smp_llsc_mb(); if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" @@ -649,7 +649,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) : "Ir" (i), "m" (v->counter) : "memory"); } else if (cpu_has_llsc) { - unsigned long temp; + long temp; __asm__ __volatile__( " .set mips3 \n" diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index b5cf6457305a..3cb50d17b62d 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -80,11 +80,8 @@ struct rb532_gpio_reg { /* Compact Flash GPIO pin */ #define CF_GPIO_NUM 13 -extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); -extern unsigned get_434_reg(unsigned reg_offs); -extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); -extern unsigned char get_latch_u5(void); extern void rb532_gpio_set_ilevel(int bit, unsigned gpio); extern void rb532_gpio_set_istat(int bit, unsigned gpio); +extern void rb532_gpio_set_func(unsigned gpio); #endif /* _RC32434_GPIO_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h index 56738d8ec4e2..023a5b100ed0 100644 --- a/arch/mips/include/asm/mach-rc32434/irq.h +++ b/arch/mips/include/asm/mach-rc32434/irq.h @@ -30,4 +30,7 @@ #define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) #define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) +#define GPIO_MAPPED_IRQ_BASE GROUP4_IRQ_BASE +#define GPIO_MAPPED_IRQ_GROUP 4 + #endif /* __ASM_RC32434_IRQ_H */ diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h index f25a84916703..6dc5f8df1f3e 100644 --- a/arch/mips/include/asm/mach-rc32434/rb.h +++ b/arch/mips/include/asm/mach-rc32434/rb.h @@ -83,4 +83,7 @@ struct mpmc_device { void __iomem *base; }; +extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); +extern unsigned char get_latch_u5(void); + #endif /* __ASM_RC32434_RB_H */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 1f30d16d4669..ce47118e52b7 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -105,7 +105,7 @@ struct pt_watch_regs { enum pt_watch_style style; union { struct mips32_watch_regs mips32; - struct mips32_watch_regs mips64; + struct mips64_watch_regs mips64; }; }; diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h index a275661fa7e1..8f77f774a2a0 100644 --- a/arch/mips/include/asm/termios.h +++ b/arch/mips/include/asm/termios.h @@ -9,6 +9,7 @@ #ifndef _ASM_TERMIOS_H #define _ASM_TERMIOS_H +#include #include #include @@ -94,38 +95,81 @@ struct termio { /* * Translate a "termio" structure into a "termios". Ugh. */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - get_user((termios)->c_line, &(termio)->c_line); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) +static inline int user_termio_to_kernel_termios(struct ktermios *termios, + struct termio __user *termio) +{ + unsigned short iflag, oflag, cflag, lflag; + unsigned int err; + + if (!access_ok(VERIFY_READ, termio, sizeof(struct termio))) + return -EFAULT; + + err = __get_user(iflag, &termio->c_iflag); + termios->c_iflag = (termios->c_iflag & 0xffff0000) | iflag; + err |=__get_user(oflag, &termio->c_oflag); + termios->c_oflag = (termios->c_oflag & 0xffff0000) | oflag; + err |=__get_user(cflag, &termio->c_cflag); + termios->c_cflag = (termios->c_cflag & 0xffff0000) | cflag; + err |=__get_user(lflag, &termio->c_lflag); + termios->c_lflag = (termios->c_lflag & 0xffff0000) | lflag; + err |=__get_user(termios->c_line, &termio->c_line); + if (err) + return -EFAULT; + + if (__copy_from_user(termios->c_cc, termio->c_cc, NCC)) + return -EFAULT; + + return 0; +} /* * Translate a "termios" structure into a "termio". Ugh. */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) +static inline int kernel_termios_to_user_termio(struct termio __user *termio, + struct ktermios *termios) +{ + int err; -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + if (!access_ok(VERIFY_WRITE, termio, sizeof(struct termio))) + return -EFAULT; + + err = __put_user(termios->c_iflag, &termio->c_iflag); + err |= __put_user(termios->c_oflag, &termio->c_oflag); + err |= __put_user(termios->c_cflag, &termio->c_cflag); + err |= __put_user(termios->c_lflag, &termio->c_lflag); + err |= __put_user(termios->c_line, &termio->c_line); + if (err) + return -EFAULT; + + if (__copy_to_user(termio->c_cc, termios->c_cc, NCC)) + return -EFAULT; + + return 0; +} + +static inline int user_termios_to_kernel_termios(struct ktermios __user *k, + struct termios2 *u) +{ + return copy_from_user(k, u, sizeof(struct termios2)) ? -EFAULT : 0; +} + +static inline int kernel_termios_to_user_termios(struct termios2 __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios2)) ? -EFAULT : 0; +} + +static inline int user_termios_to_kernel_termios_1(struct ktermios *k, + struct termios __user *u) +{ + return copy_from_user(k, u, sizeof(struct termios)) ? -EFAULT : 0; +} + +static inline int kernel_termios_to_user_termios_1(struct termios __user *u, + struct ktermios *k) +{ + return copy_to_user(u, k, sizeof(struct termios)) ? -EFAULT : 0; +} #endif /* defined(__KERNEL__) */ diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 88badb423010..964ef7ede268 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -541,5 +541,6 @@ void tx4939_irq_init(void); int tx4939_irq(void); void tx4939_mtd_init(int ch); void tx4939_ata_init(void); +void tx4939_rtc_init(void); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index fb6f73148df2..8882e5766f27 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -458,7 +458,11 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER fpe fpe fpe silent /* #15 */ BUILD_HANDLER mdmx mdmx sti silent /* #22 */ #ifdef CONFIG_HARDWARE_WATCHPOINTS - BUILD_HANDLER watch watch sti silent /* #23 */ + /* + * For watch, interrupts will be enabled after the watch + * registers are read. + */ + BUILD_HANDLER watch watch cli silent /* #23 */ #else BUILD_HANDLER watch watch sti verbose /* #23 */ #endif diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index 5e77a3a21f98..42461310b185 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -79,7 +79,8 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, euid = current_euid(); retval = -EPERM; - if (euid != p->euid && euid != p->uid && !capable(CAP_SYS_NICE)) { + if (euid != p->cred->euid && euid != p->cred->uid && + !capable(CAP_SYS_NICE)) { read_unlock(&tasklist_lock); goto out_unlock; } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f6083c6bfaa4..b2d7041341b8 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -944,6 +944,9 @@ asmlinkage void do_mdmx(struct pt_regs *regs) force_sig(SIGILL, current); } +/* + * Called with interrupts disabled. + */ asmlinkage void do_watch(struct pt_regs *regs) { u32 cause; @@ -963,9 +966,12 @@ asmlinkage void do_watch(struct pt_regs *regs) */ if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) { mips_read_watch_registers(); + local_irq_enable(); force_sig(SIGTRAP, current); - } else + } else { mips_clear_watch_registers(); + local_irq_enable(); + } } asmlinkage void do_mcheck(struct pt_regs *regs) @@ -1582,7 +1588,11 @@ void __init set_handler(unsigned long offset, void *addr, unsigned long size) static char panic_null_cerr[] __cpuinitdata = "Trying to set NULL cache error exception handler"; -/* Install uncached CPU exception handler */ +/* + * Install uncached CPU exception handler. + * This is suitable only for the cache error exception which is the only + * exception handler that is being run uncached. + */ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long size) { @@ -1593,7 +1603,7 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long uncached_ebase = TO_UNCAC(ebase); #endif if (cpu_has_mips_r2) - ebase += (read_c0_ebase() & 0x3ffff000); + uncached_ebase += (read_c0_ebase() & 0x3ffff000); if (!addr) panic(panic_null_cerr); diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S index 736d0fb56a94..68853a038d3f 100644 --- a/arch/mips/lib/memcpy-inatomic.S +++ b/arch/mips/lib/memcpy-inatomic.S @@ -21,7 +21,7 @@ * end of memory on some systems. It's also a seriously bad idea on non * dma-coherent systems. */ -#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27) +#ifdef CONFIG_DMA_NONCOHERENT #undef CONFIG_CPU_HAS_PREFETCH #endif #ifdef CONFIG_MIPS_MALTA diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index c06cccf60bec..56a1f85a1ce8 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -21,7 +21,7 @@ * end of memory on some systems. It's also a seriously bad idea on non * dma-coherent systems. */ -#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27) +#ifdef CONFIG_DMA_NONCOHERENT #undef CONFIG_CPU_HAS_PREFETCH #endif #ifdef CONFIG_MIPS_MALTA diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 6e99665ae860..c43f4b26a690 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -618,15 +618,35 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) if (cpu_has_inclusive_pcaches) { if (size >= scache_size) r4k_blast_scache(); - else + else { + unsigned long lsize = cpu_scache_line_size(); + unsigned long almask = ~(lsize - 1); + + /* + * There is no clearly documented alignment requirement + * for the cache instruction on MIPS processors and + * some processors, among them the RM5200 and RM7000 + * QED processors will throw an address error for cache + * hit ops with insufficient alignment. Solved by + * aligning the address to cache line size. + */ + cache_op(Hit_Writeback_Inv_SD, addr & almask); + cache_op(Hit_Writeback_Inv_SD, + (addr + size - 1) & almask); blast_inv_scache_range(addr, addr + size); + } return; } if (cpu_has_safe_index_cacheops && size >= dcache_size) { r4k_blast_dcache(); } else { + unsigned long lsize = cpu_dcache_line_size(); + unsigned long almask = ~(lsize - 1); + R4600_HIT_CACHEOP_WAR_IMPL; + cache_op(Hit_Writeback_Inv_D, addr & almask); + cache_op(Hit_Writeback_Inv_D, (addr + size - 1) & almask); blast_inv_dcache_range(addr, addr + size); } diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index fa636fc6b7b9..55767ad9f00e 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -97,7 +97,6 @@ good_area: goto bad_area; } -survive: /* * If for any reason at all we couldn't handle the fault, * make sure we exit gracefully rather than endlessly redo @@ -167,21 +166,13 @@ no_context: field, regs->regs[31]); die("Oops", regs); -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ out_of_memory: - up_read(&mm->mmap_sem); - if (is_global_init(tsk)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } - printk("VM: killing process %s\n", tsk->comm); - if (user_mode(regs)) - do_group_exit(SIGKILL); - goto no_context; + /* + * We ran out of memory, call the OOM killer, and return the userspace + * (which will retry the fault, or kill us if we got oom-killed). + */ + pagefault_out_of_memory(); + return; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c index 1c2821e2f494..71f7d27b0d4c 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c @@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void) static int __init rc32434_pci_init(void) { + void __iomem *io_map_base; + pr_info("PCI: Initializing PCI\n"); ioport_resource.start = rc32434_res_pci_io1.start; @@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void) rc32434_pcibridge_init(); + io_map_base = ioremap(rc32434_res_pci_io1.start, + rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1); + + if (!io_map_base) + return -ENOMEM; + + rc32434_controller.io_map_base = + (unsigned long)io_map_base - rc32434_res_pci_io1.start; + register_pci_controller(&rc32434_controller); rc32434_sync(); diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index c1c29181bd46..4a5f05b662ae 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -24,6 +24,7 @@ #include #include #include +#include #include @@ -39,6 +40,29 @@ #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET) #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET) +extern unsigned int idt_cpu_freq; + +static struct mpmc_device dev3; + +void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) +{ + unsigned long flags; + + spin_lock_irqsave(&dev3.lock, flags); + + dev3.state = (dev3.state | or_mask) & ~nand_mask; + writeb(dev3.state, dev3.base); + + spin_unlock_irqrestore(&dev3.lock, flags); +} +EXPORT_SYMBOL(set_latch_u5); + +unsigned char get_latch_u5(void) +{ + return dev3.state; +} +EXPORT_SYMBOL(get_latch_u5); + static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -86,7 +110,7 @@ static struct korina_device korina_dev0_data = { static struct platform_device korina_dev0 = { .id = -1, .name = "korina", - .dev.platform_data = &korina_dev0_data, + .dev.driver_data = &korina_dev0_data, .resource = korina_dev0_res, .num_resources = ARRAY_SIZE(korina_dev0_res), }; @@ -214,12 +238,32 @@ static struct platform_device rb532_wdt = { .num_resources = ARRAY_SIZE(rb532_wdt_res), }; +static struct plat_serial8250_port rb532_uart_res[] = { + { + .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE), + .irq = UART0_IRQ, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF, + }, + { + .flags = 0, + } +}; + +static struct platform_device rb532_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = &rb532_uart_res, +}; + static struct platform_device *rb532_devs[] = { &korina_dev0, &nand_slot0, &cf_slot0, &rb532_led, &rb532_button, + &rb532_uart, &rb532_wdt }; @@ -291,9 +335,20 @@ static int __init plat_setup_devices(void) nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE); nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; + /* Read and map device controller 3 */ + dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1); + + if (!dev3.base) { + printk(KERN_ERR "rb532: cannot remap device controller 3\n"); + return -ENXIO; + } + /* Initialise the NAND device */ rb532_nand_setup(); + /* set the uart clock to the current cpu frequency */ + rb532_uart_res[0].uartclk = idt_cpu_freq; + return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); } diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 0e84c8ab6a39..37de05d595e7 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -41,8 +41,6 @@ struct rb532_gpio_chip { void __iomem *regbase; }; -struct mpmc_device dev3; - static struct resource rb532_gpio_reg0_res[] = { { .name = "gpio_reg0", @@ -52,61 +50,6 @@ static struct resource rb532_gpio_reg0_res[] = { } }; -static struct resource rb532_dev3_ctl_res[] = { - { - .name = "dev3_ctl", - .start = REGBASE + DEV3BASE, - .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1, - .flags = IORESOURCE_MEM, - } -}; - -void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) -{ - unsigned long flags; - unsigned data; - unsigned i = 0; - - spin_lock_irqsave(&dev3.lock, flags); - - data = readl(IDT434_REG_BASE + reg_offs); - for (i = 0; i != len; ++i) { - if (val & (1 << i)) - data |= (1 << (i + bit)); - else - data &= ~(1 << (i + bit)); - } - writel(data, (IDT434_REG_BASE + reg_offs)); - - spin_unlock_irqrestore(&dev3.lock, flags); -} -EXPORT_SYMBOL(set_434_reg); - -unsigned get_434_reg(unsigned reg_offs) -{ - return readl(IDT434_REG_BASE + reg_offs); -} -EXPORT_SYMBOL(get_434_reg); - -void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) -{ - unsigned long flags; - - spin_lock_irqsave(&dev3.lock, flags); - - dev3.state = (dev3.state | or_mask) & ~nand_mask; - writel(dev3.state, &dev3.base); - - spin_unlock_irqrestore(&dev3.lock, flags); -} -EXPORT_SYMBOL(set_latch_u5); - -unsigned char get_latch_u5(void) -{ - return dev3.state; -} -EXPORT_SYMBOL(get_latch_u5); - /* rb532_set_bit - sanely set a bit * * bitval: new value for the bit @@ -119,13 +62,11 @@ static inline void rb532_set_bit(unsigned bitval, unsigned long flags; u32 val; - bitval = !!bitval; /* map parameter to {0,1} */ - local_irq_save(flags); val = readl(ioaddr); - val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */ - val |= ( bitval << offset ); /* set bit if bitval == 1 */ + val &= ~(!bitval << offset); /* unset bit if bitval == 0 */ + val |= (!!bitval << offset); /* set bit if bitval == 1 */ writel(val, ioaddr); local_irq_restore(flags); @@ -171,8 +112,8 @@ static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset) gpch = container_of(chip, struct rb532_gpio_chip, chip); - if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) - return 1; /* alternate function, GPIOCFG is ignored */ + /* disable alternate function in case it's set */ + rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC); rb532_set_bit(0, offset, gpch->regbase + GPIOCFG); return 0; @@ -188,8 +129,8 @@ static int rb532_gpio_direction_output(struct gpio_chip *chip, gpch = container_of(chip, struct rb532_gpio_chip, chip); - if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC)) - return 1; /* alternate function, GPIOCFG is ignored */ + /* disable alternate function in case it's set */ + rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC); /* set the initial output value */ rb532_set_bit(value, offset, gpch->regbase + GPIOD); @@ -233,10 +174,11 @@ EXPORT_SYMBOL(rb532_gpio_set_istat); /* * Configure GPIO alternate function */ -static void rb532_gpio_set_func(int bit, unsigned gpio) +void rb532_gpio_set_func(unsigned gpio) { - rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC); + rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC); } +EXPORT_SYMBOL(rb532_gpio_set_func); int __init rb532_gpio_init(void) { @@ -253,20 +195,6 @@ int __init rb532_gpio_init(void) /* Register our GPIO chip */ gpiochip_add(&rb532_gpio_chip->chip); - r = rb532_dev3_ctl_res; - dev3.base = ioremap_nocache(r->start, r->end - r->start); - - if (!dev3.base) { - printk(KERN_ERR "rb532: cannot remap device controller 3\n"); - return -ENXIO; - } - - /* configure CF_GPIO_NUM as CFRDY IRQ source */ - rb532_gpio_set_func(0, CF_GPIO_NUM); - rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM); - rb532_gpio_set_ilevel(1, CF_GPIO_NUM); - rb532_gpio_set_istat(0, CF_GPIO_NUM); - return 0; } arch_initcall(rb532_gpio_init); diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c index 549b46d2fcee..53eeb5e7bc5b 100644 --- a/arch/mips/rb532/irq.c +++ b/arch/mips/rb532/irq.c @@ -46,6 +46,7 @@ #include #include +#include struct intr_group { u32 mask; /* mask of valid bits in pending/mask registers */ @@ -150,6 +151,9 @@ static void rb532_disable_irq(unsigned int irq_nr) mask |= intr_bit; WRITE_MASK(addr, mask); + if (group == GPIO_MAPPED_IRQ_GROUP) + rb532_gpio_set_istat(0, irq_nr - GPIO_MAPPED_IRQ_BASE); + /* * if there are no more interrupts enabled in this * group, disable corresponding IP @@ -165,12 +169,35 @@ static void rb532_mask_and_ack_irq(unsigned int irq_nr) ack_local_irq(group_to_ip(irq_to_group(irq_nr))); } +static int rb532_set_type(unsigned int irq_nr, unsigned type) +{ + int gpio = irq_nr - GPIO_MAPPED_IRQ_BASE; + int group = irq_to_group(irq_nr); + + if (group != GPIO_MAPPED_IRQ_GROUP) + return (type == IRQ_TYPE_LEVEL_HIGH) ? 0 : -EINVAL; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + rb532_gpio_set_ilevel(1, gpio); + break; + case IRQ_TYPE_LEVEL_LOW: + rb532_gpio_set_ilevel(0, gpio); + break; + default: + return -EINVAL; + } + + return 0; +} + static struct irq_chip rc32434_irq_type = { .name = "RB532", .ack = rb532_disable_irq, .mask = rb532_disable_irq, .mask_ack = rb532_mask_and_ack_irq, .unmask = rb532_enable_irq, + .set_type = rb532_set_type, }; void __init arch_init_irq(void) diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c index 3e0d7ec3a579..00ed19f0bdb5 100644 --- a/arch/mips/rb532/serial.c +++ b/arch/mips/rb532/serial.c @@ -36,7 +36,7 @@ extern unsigned int idt_cpu_freq; static struct uart_port rb532_uart = { - .type = PORT_16550A, + .flags = UPF_BOOT_AUTOCONF, .line = 0, .irq = UART0_IRQ, .iotype = UPIO_MEM, diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 6c0049a5bbc1..55440967b3a8 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -435,6 +435,28 @@ void __init tx4939_ata_init(void) platform_device_register(&ata1_dev); } +void __init tx4939_rtc_init(void) +{ + static struct resource res[] = { + { + .start = TX4939_RTC_REG & 0xfffffffffULL, + .end = (TX4939_RTC_REG & 0xfffffffffULL) + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_RTC, + .flags = IORESOURCE_IRQ, + }, + }; + static struct platform_device rtc_dev = { + .name = "tx4939rtc", + .id = -1, + .num_resources = ARRAY_SIZE(res), + .resource = res, + }; + + platform_device_register(&rtc_dev); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 98fbd9391bf8..656603b85b71 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -336,6 +336,7 @@ static void __init rbtx4939_device_init(void) rbtx4939_led_setup(); tx4939_wdt_init(); tx4939_ata_init(); + tx4939_rtc_init(); } static void __init rbtx4939_setup(void) diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 99c495ad9c75..1239c6132b4a 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:12:40 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:58 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -182,9 +187,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,6 +215,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -222,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +275,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -426,6 +436,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -514,6 +530,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -538,6 +557,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -588,8 +611,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -629,8 +654,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -675,10 +698,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -736,6 +761,7 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -760,18 +786,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -817,6 +842,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -826,7 +855,6 @@ CONFIG_USB_STORAGE=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -847,6 +875,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -883,10 +912,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -906,6 +932,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1002,6 +1029,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1053,6 +1081,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1061,6 +1090,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1069,11 +1100,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1100,11 +1133,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 9796220032fd..b7b880562906 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:10:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:14 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,14 +72,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +121,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +131,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +138,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,7 +156,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # @@ -192,7 +196,7 @@ CONFIG_PPC_LITE5200=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,13 +407,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -445,6 +462,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -461,6 +479,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -580,6 +600,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -626,6 +649,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -648,6 +672,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -695,8 +723,10 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -762,8 +792,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -796,10 +824,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -846,9 +876,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -860,7 +894,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -881,6 +914,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -914,10 +948,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -926,6 +957,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -967,6 +999,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1016,6 +1049,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1024,6 +1058,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1032,11 +1068,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1063,11 +1101,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index d081e0031057..fb10f22fd0d2 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:11:02 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:42:29 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,13 +129,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,7 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -182,9 +187,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,6 +216,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -222,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +276,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -426,6 +437,12 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -447,10 +464,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -492,6 +515,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -525,6 +549,9 @@ CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -548,6 +575,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -590,8 +621,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -629,8 +662,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -659,6 +690,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -678,6 +710,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -721,10 +754,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -835,7 +870,6 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -856,6 +890,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -892,10 +927,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -915,6 +947,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1011,6 +1044,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1062,6 +1096,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1070,6 +1105,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1078,11 +1115,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1109,11 +1148,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index b21b8e8c3a78..00944c09a0ae 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:13:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:41:33 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,15 +72,24 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +121,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +132,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +139,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,7 +157,6 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -191,9 +195,9 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -CONFIG_PPC_BESTCOMM_ATA=y +CONFIG_PPC_BESTCOMM_ATA=m CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -212,7 +216,6 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set @@ -222,6 +225,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -233,12 +237,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -261,6 +267,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -283,6 +290,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -365,6 +375,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -413,9 +424,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -438,6 +447,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -587,6 +602,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -620,6 +638,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -675,7 +697,9 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -740,8 +764,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -774,10 +796,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -837,6 +861,7 @@ CONFIG_USB_DEVICEFS=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m @@ -864,18 +889,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -921,6 +945,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -983,7 +1011,6 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1004,6 +1031,7 @@ CONFIG_FS_MBCACHE=m CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -1039,10 +1067,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1062,6 +1087,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1141,6 +1167,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1173,6 +1200,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1180,6 +1209,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 79954579f5ec..65237ad6f07e 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:09:30 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:42:58 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,14 +71,23 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -121,7 +129,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -129,11 +136,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -149,7 +154,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -188,9 +192,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y -# CONFIG_PPC_BESTCOMM_ATA is not set +CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_PPC_BESTCOMM_GEN_BD is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -217,6 +221,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -228,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +281,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -364,6 +374,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -432,6 +443,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -496,6 +513,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -530,6 +548,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -554,6 +575,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -604,8 +629,10 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -645,8 +672,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -675,6 +700,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -694,6 +720,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -742,10 +769,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -803,6 +832,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -827,18 +857,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -884,6 +913,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -947,7 +980,6 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -968,6 +1000,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1004,10 +1037,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1027,6 +1057,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1123,6 +1154,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1174,6 +1206,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1182,6 +1215,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1190,11 +1225,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1221,11 +1258,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 5ff3de205d6a..81afc8b373d7 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Thu Nov 13 02:09:07 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 21:40:44 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,10 +72,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -108,7 +117,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,7 +127,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -127,11 +134,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,7 +152,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # @@ -192,7 +196,7 @@ CONFIG_RTAS_PROC=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -CONFIG_PPC_BESTCOMM_GEN_BD=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -220,6 +224,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -231,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -342,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -376,6 +387,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -446,6 +458,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + # # UBI - Unsorted block images # @@ -474,13 +492,19 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -539,6 +563,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -659,6 +685,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -692,6 +721,10 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + # # USB Network Adapters # @@ -774,9 +807,11 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_RTAS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -844,8 +879,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -874,6 +907,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -894,6 +928,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -953,10 +988,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -1051,7 +1088,7 @@ CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1093,21 +1130,22 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y # CONFIG_HID_APPLE is not set CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y # CONFIG_HID_GYRATION is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1137,6 +1175,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1164,18 +1203,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1222,6 +1260,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1243,7 +1285,6 @@ CONFIG_NEW_LEDS=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1264,6 +1305,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1300,10 +1342,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1323,6 +1362,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1403,6 +1443,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1454,6 +1495,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1462,6 +1504,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1470,11 +1514,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1501,11 +1547,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index da5a3855a0c4..19b12d2cbb4b 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -16,8 +16,6 @@ * 2 of the License, or (at your option) any later version. */ -#define DEBUG - #include #include #include @@ -258,7 +256,8 @@ int pci_read_irq_line(struct pci_dev *pci_dev) } else { pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", oirq.size, oirq.specifier[0], oirq.specifier[1], - oirq.controller->full_name); + oirq.controller ? oirq.controller->full_name : + ""); virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index c3f2c21024e3..87ff522f28b5 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -19,14 +19,6 @@ #include -/* ======================================================================== */ -/* PCI windows config */ -/* ======================================================================== */ - -#define MPC52xx_PCI_TARGET_IO 0xf0000000 -#define MPC52xx_PCI_TARGET_MEM 0x00000000 - - /* ======================================================================== */ /* Structures mapping & Defines for PCI Unit */ /* ======================================================================== */ @@ -244,7 +236,7 @@ static struct pci_ops mpc52xx_pci_ops = { static void __init mpc52xx_pci_setup(struct pci_controller *hose, - struct mpc52xx_pci __iomem *pci_regs) + struct mpc52xx_pci __iomem *pci_regs, phys_addr_t pci_phys) { struct resource *res; u32 tmp; @@ -314,10 +306,14 @@ mpc52xx_pci_setup(struct pci_controller *hose, /* Set all the IWCR fields at once; they're in the same reg */ out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2)); - out_be32(&pci_regs->tbatr0, - MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO ); - out_be32(&pci_regs->tbatr1, - MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); + /* Map IMMR onto PCI bus */ + pci_phys &= 0xfffc0000; /* bar0 has only 14 significant bits */ + out_be32(&pci_regs->tbatr0, MPC52xx_PCI_TBATR_ENABLE | pci_phys); + out_be32(&pci_regs->bar0, PCI_BASE_ADDRESS_MEM_PREFETCH | pci_phys); + + /* Map memory onto PCI bus */ + out_be32(&pci_regs->tbatr1, MPC52xx_PCI_TBATR_ENABLE); + out_be32(&pci_regs->bar1, PCI_BASE_ADDRESS_MEM_PREFETCH); out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8); @@ -414,7 +410,7 @@ mpc52xx_add_bridge(struct device_node *node) /* Finish setting up PCI using values obtained by * pci_proces_bridge_OF_ranges */ - mpc52xx_pci_setup(hose, pci_regs); + mpc52xx_pci_setup(hose, pci_regs, rsrc.start); return 0; } diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index caf4c33f4e84..7c35787d29b4 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include