input: remove obsolete {corgi,spitz,tosa}kbd.c

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
This commit is contained in:
Eric Miao 2010-04-27 14:50:54 +08:00
parent cb8f3c7dea
commit 25646d70a0
6 changed files with 0 additions and 1393 deletions

View File

@ -520,17 +520,6 @@ Who: Hans de Goede <hdegoede@redhat.com>
----------------------------
What: corgikbd, spitzkbd, tosakbd driver
When: 2.6.35
Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c
Why: We now have a generic GPIO based matrix keyboard driver that
are fully capable of handling all the keys on these devices.
The original drivers manipulate the GPIO registers directly
and so are difficult to maintain.
Who: Eric Miao <eric.y.miao@gmail.com>
----------------------------
What: capifs
When: February 2011
Files: drivers/isdn/capi/capifs.*

View File

@ -143,19 +143,6 @@ config KEYBOARD_BFIN
To compile this driver as a module, choose M here: the
module will be called bf54x-keys.
config KEYBOARD_CORGI
tristate "Corgi keyboard (deprecated)"
depends on PXA_SHARPSL
help
Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
series of PDAs.
This driver is now deprecated, use generic GPIO based matrix
keyboard driver instead.
To compile this driver as a module, choose M here: the
module will be called corgikbd.
config KEYBOARD_LKKBD
tristate "DECstation/VAXstation LK201/LK401 keyboard"
select SERIO
@ -339,19 +326,6 @@ config KEYBOARD_PXA930_ROTARY
To compile this driver as a module, choose M here: the
module will be called pxa930_rotary.
config KEYBOARD_SPITZ
tristate "Spitz keyboard (deprecated)"
depends on PXA_SHARPSL
help
Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
SL-C3000 and Sl-C3100 series of PDAs.
This driver is now deprecated, use generic GPIO based matrix
keyboard driver instead.
To compile this driver as a module, choose M here: the
module will be called spitzkbd.
config KEYBOARD_STOWAWAY
tristate "Stowaway keyboard"
select SERIO
@ -414,18 +388,6 @@ config KEYBOARD_TWL4030
To compile this driver as a module, choose M here: the
module will be called twl4030_keypad.
config KEYBOARD_TOSA
tristate "Tosa keyboard (deprecated)"
depends on MACH_TOSA
help
Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
This driver is now deprecated, use generic GPIO based matrix
keyboard driver instead.
To compile this driver as a module, choose M here: the
module will be called tosakbd.
config KEYBOARD_XTKBD
tristate "XT keyboard"
select SERIO

View File

@ -11,7 +11,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
@ -33,10 +32,8 @@ obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o

View File

@ -1,414 +0,0 @@
/*
* Keyboard driver for Sharp Corgi models (SL-C7xx)
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on xtkbd.c/locomkbd.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <mach/corgi.h>
#include <mach/pxa2xx-gpio.h>
#include <asm/hardware/scoop.h>
#define KB_ROWS 8
#define KB_COLS 12
#define KB_ROWMASK(r) (1 << (r))
#define SCANCODE(r,c) ( ((r)<<4) + (c) + 1 )
/* zero code, 124 scancodes */
#define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 )
#define SCAN_INTERVAL (50) /* ms */
#define HINGE_SCAN_INTERVAL (250) /* ms */
#define CORGI_KEY_CALENDER KEY_F1
#define CORGI_KEY_ADDRESS KEY_F2
#define CORGI_KEY_FN KEY_F3
#define CORGI_KEY_CANCEL KEY_F4
#define CORGI_KEY_OFF KEY_SUSPEND
#define CORGI_KEY_EXOK KEY_F5
#define CORGI_KEY_EXCANCEL KEY_F6
#define CORGI_KEY_EXJOGDOWN KEY_F7
#define CORGI_KEY_EXJOGUP KEY_F8
#define CORGI_KEY_JAP1 KEY_LEFTCTRL
#define CORGI_KEY_JAP2 KEY_LEFTALT
#define CORGI_KEY_MAIL KEY_F10
#define CORGI_KEY_OK KEY_F11
#define CORGI_KEY_MENU KEY_F12
static unsigned char corgikbd_keycode[NR_SCANCODES] = {
0, /* 0 */
0, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, 0, 0, 0, 0, 0, 0, 0, /* 1-16 */
0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, 0, 0, 0, 0, 0, 0, 0, /* 17-32 */
KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */
CORGI_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */
CORGI_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, 0, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, /* 65-80 */
CORGI_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, 0, CORGI_KEY_FN, 0, 0, 0, 0, /* 81-96 */
KEY_SYSRQ, CORGI_KEY_JAP1, CORGI_KEY_JAP2, CORGI_KEY_CANCEL, CORGI_KEY_OK, CORGI_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0, /* 97-112 */
CORGI_KEY_OFF, CORGI_KEY_EXOK, CORGI_KEY_EXCANCEL, CORGI_KEY_EXJOGDOWN, CORGI_KEY_EXJOGUP, 0, 0, 0, 0, 0, 0, 0, /* 113-124 */
};
struct corgikbd {
unsigned char keycode[ARRAY_SIZE(corgikbd_keycode)];
struct input_dev *input;
spinlock_t lock;
struct timer_list timer;
struct timer_list htimer;
unsigned int suspended;
unsigned long suspend_jiffies;
};
#define KB_DISCHARGE_DELAY 10
#define KB_ACTIVATE_DELAY 10
/* Helper functions for reading the keyboard matrix
* Note: We should really be using the generic gpio functions to alter
* GPDR but it requires a function call per GPIO bit which is
* excessive when we need to access 12 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
static inline void corgikbd_discharge_all(void)
{
/* STROBE All HiZ */
GPCR2 = CORGI_GPIO_ALL_STROBE_BIT;
GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT;
}
static inline void corgikbd_activate_all(void)
{
/* STROBE ALL -> High */
GPSR2 = CORGI_GPIO_ALL_STROBE_BIT;
GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT;
udelay(KB_DISCHARGE_DELAY);
/* Clear any interrupts we may have triggered when altering the GPIO lines */
GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT;
GEDR2 = CORGI_GPIO_LOW_SENSE_BIT;
}
static inline void corgikbd_activate_col(int col)
{
/* STROBE col -> High, not col -> HiZ */
GPSR2 = CORGI_GPIO_STROBE_BIT(col);
GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col);
}
static inline void corgikbd_reset_col(int col)
{
/* STROBE col -> Low */
GPCR2 = CORGI_GPIO_STROBE_BIT(col);
/* STROBE col -> out, not col -> HiZ */
GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col);
}
#define GET_ROWS_STATUS(c) (((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT))
/*
* The corgi keyboard only generates interrupts when a key is pressed.
* When a key is pressed, we enable a timer which then scans the
* keyboard to detect when the key is released.
*/
/* Scan the hardware keyboard and push any changes up through the input layer */
static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data)
{
unsigned int row, col, rowd;
unsigned long flags;
unsigned int num_pressed;
if (corgikbd_data->suspended)
return;
spin_lock_irqsave(&corgikbd_data->lock, flags);
num_pressed = 0;
for (col = 0; col < KB_COLS; col++) {
/*
* Discharge the output driver capacitatance
* in the keyboard matrix. (Yes it is significant..)
*/
corgikbd_discharge_all();
udelay(KB_DISCHARGE_DELAY);
corgikbd_activate_col(col);
udelay(KB_ACTIVATE_DELAY);
rowd = GET_ROWS_STATUS(col);
for (row = 0; row < KB_ROWS; row++) {
unsigned int scancode, pressed;
scancode = SCANCODE(row, col);
pressed = rowd & KB_ROWMASK(row);
input_report_key(corgikbd_data->input, corgikbd_data->keycode[scancode], pressed);
if (pressed)
num_pressed++;
if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF)
&& time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) {
input_event(corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1);
corgikbd_data->suspend_jiffies=jiffies;
}
}
corgikbd_reset_col(col);
}
corgikbd_activate_all();
input_sync(corgikbd_data->input);
/* if any keys are pressed, enable the timer */
if (num_pressed)
mod_timer(&corgikbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL));
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
}
/*
* corgi keyboard interrupt handler.
*/
static irqreturn_t corgikbd_interrupt(int irq, void *dev_id)
{
struct corgikbd *corgikbd_data = dev_id;
if (!timer_pending(&corgikbd_data->timer)) {
/** wait chattering delay **/
udelay(20);
corgikbd_scankeyboard(corgikbd_data);
}
return IRQ_HANDLED;
}
/*
* corgi timer checking for released keys
*/
static void corgikbd_timer_callback(unsigned long data)
{
struct corgikbd *corgikbd_data = (struct corgikbd *) data;
corgikbd_scankeyboard(corgikbd_data);
}
/*
* The hinge switches generate no interrupt so they need to be
* monitored by a timer.
*
* We debounce the switches and pass them to the input system.
*
* gprr == 0x00 - Keyboard with Landscape Screen
* 0x08 - No Keyboard with Portrait Screen
* 0x0c - Keyboard and Screen Closed
*/
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
#define HINGE_STABLE_COUNT 2
static int sharpsl_hinge_state;
static int hinge_count;
static void corgikbd_hinge_timer(unsigned long data)
{
struct corgikbd *corgikbd_data = (struct corgikbd *) data;
unsigned long gprr;
unsigned long flags;
gprr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_GPRR) & (CORGI_SCP_SWA | CORGI_SCP_SWB);
gprr |= (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0);
if (gprr != sharpsl_hinge_state) {
hinge_count = 0;
sharpsl_hinge_state = gprr;
} else if (hinge_count < HINGE_STABLE_COUNT) {
hinge_count++;
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&corgikbd_data->lock, flags);
input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
input_sync(corgikbd_data->input);
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
}
}
mod_timer(&corgikbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
}
#ifdef CONFIG_PM
static int corgikbd_suspend(struct platform_device *dev, pm_message_t state)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(dev);
corgikbd->suspended = 1;
/* strobe 0 is the power key so this can't be made an input for
powersaving therefore i = 1 */
for (i = 1; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_IN);
return 0;
}
static int corgikbd_resume(struct platform_device *dev)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(dev);
for (i = 1; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
/* Upon resume, ignore the suspend key for a short while */
corgikbd->suspend_jiffies=jiffies;
corgikbd->suspended = 0;
return 0;
}
#else
#define corgikbd_suspend NULL
#define corgikbd_resume NULL
#endif
static int __devinit corgikbd_probe(struct platform_device *pdev)
{
struct corgikbd *corgikbd;
struct input_dev *input_dev;
int i, err = -ENOMEM;
corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL);
input_dev = input_allocate_device();
if (!corgikbd || !input_dev)
goto fail;
platform_set_drvdata(pdev, corgikbd);
corgikbd->input = input_dev;
spin_lock_init(&corgikbd->lock);
/* Init Keyboard rescan timer */
init_timer(&corgikbd->timer);
corgikbd->timer.function = corgikbd_timer_callback;
corgikbd->timer.data = (unsigned long) corgikbd;
/* Init Hinge Timer */
init_timer(&corgikbd->htimer);
corgikbd->htimer.function = corgikbd_hinge_timer;
corgikbd->htimer.data = (unsigned long) corgikbd;
corgikbd->suspend_jiffies=jiffies;
memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode));
input_dev->name = "Corgi Keyboard";
input_dev->phys = "corgikbd/input0";
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &pdev->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
BIT_MASK(EV_PWR) | BIT_MASK(EV_SW);
input_dev->keycode = corgikbd->keycode;
input_dev->keycodesize = sizeof(unsigned char);
input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode);
for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
set_bit(corgikbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
set_bit(SW_LID, input_dev->swbit);
set_bit(SW_TABLET_MODE, input_dev->swbit);
set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
err = input_register_device(corgikbd->input);
if (err)
goto fail;
mod_timer(&corgikbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) {
pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN);
if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt,
IRQF_DISABLED | IRQF_TRIGGER_RISING,
"corgikbd", corgikbd))
printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i);
}
/* Set Strobe lines as outputs - set high */
for (i = 0; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
/* Setup the headphone jack as an input */
pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
return 0;
fail: input_free_device(input_dev);
kfree(corgikbd);
return err;
}
static int __devexit corgikbd_remove(struct platform_device *pdev)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(pdev);
for (i = 0; i < CORGI_KEY_SENSE_NUM; i++)
free_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd);
del_timer_sync(&corgikbd->htimer);
del_timer_sync(&corgikbd->timer);
input_unregister_device(corgikbd->input);
kfree(corgikbd);
return 0;
}
static struct platform_driver corgikbd_driver = {
.probe = corgikbd_probe,
.remove = __devexit_p(corgikbd_remove),
.suspend = corgikbd_suspend,
.resume = corgikbd_resume,
.driver = {
.name = "corgi-keyboard",
.owner = THIS_MODULE,
},
};
static int __init corgikbd_init(void)
{
return platform_driver_register(&corgikbd_driver);
}
static void __exit corgikbd_exit(void)
{
platform_driver_unregister(&corgikbd_driver);
}
module_init(corgikbd_init);
module_exit(corgikbd_exit);
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Corgi Keyboard Driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:corgi-keyboard");

View File

@ -1,496 +0,0 @@
/*
* Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series)
*
* Copyright (c) 2005 Richard Purdie
*
* Based on corgikbd.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <mach/spitz.h>
#include <mach/pxa2xx-gpio.h>
#define KB_ROWS 7
#define KB_COLS 11
#define KB_ROWMASK(r) (1 << (r))
#define SCANCODE(r,c) (((r)<<4) + (c) + 1)
#define NR_SCANCODES ((KB_ROWS<<4) + 1)
#define SCAN_INTERVAL (50) /* ms */
#define HINGE_SCAN_INTERVAL (150) /* ms */
#define SPITZ_KEY_CALENDER KEY_F1
#define SPITZ_KEY_ADDRESS KEY_F2
#define SPITZ_KEY_FN KEY_F3
#define SPITZ_KEY_CANCEL KEY_F4
#define SPITZ_KEY_EXOK KEY_F5
#define SPITZ_KEY_EXCANCEL KEY_F6
#define SPITZ_KEY_EXJOGDOWN KEY_F7
#define SPITZ_KEY_EXJOGUP KEY_F8
#define SPITZ_KEY_JAP1 KEY_LEFTALT
#define SPITZ_KEY_JAP2 KEY_RIGHTCTRL
#define SPITZ_KEY_SYNC KEY_F9
#define SPITZ_KEY_MAIL KEY_F10
#define SPITZ_KEY_OK KEY_F11
#define SPITZ_KEY_MENU KEY_F12
static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
0, /* 0 */
KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0, /* 1-16 */
0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */
SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */
SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */
SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0, /* 81-96 */
KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0 /* 97-112 */
};
static int spitz_strobes[] = {
SPITZ_GPIO_KEY_STROBE0,
SPITZ_GPIO_KEY_STROBE1,
SPITZ_GPIO_KEY_STROBE2,
SPITZ_GPIO_KEY_STROBE3,
SPITZ_GPIO_KEY_STROBE4,
SPITZ_GPIO_KEY_STROBE5,
SPITZ_GPIO_KEY_STROBE6,
SPITZ_GPIO_KEY_STROBE7,
SPITZ_GPIO_KEY_STROBE8,
SPITZ_GPIO_KEY_STROBE9,
SPITZ_GPIO_KEY_STROBE10,
};
static int spitz_senses[] = {
SPITZ_GPIO_KEY_SENSE0,
SPITZ_GPIO_KEY_SENSE1,
SPITZ_GPIO_KEY_SENSE2,
SPITZ_GPIO_KEY_SENSE3,
SPITZ_GPIO_KEY_SENSE4,
SPITZ_GPIO_KEY_SENSE5,
SPITZ_GPIO_KEY_SENSE6,
};
struct spitzkbd {
unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)];
struct input_dev *input;
char phys[32];
spinlock_t lock;
struct timer_list timer;
struct timer_list htimer;
unsigned int suspended;
unsigned long suspend_jiffies;
};
#define KB_DISCHARGE_DELAY 10
#define KB_ACTIVATE_DELAY 10
/* Helper functions for reading the keyboard matrix
* Note: We should really be using the generic gpio functions to alter
* GPDR but it requires a function call per GPIO bit which is
* excessive when we need to access 11 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
static inline void spitzkbd_discharge_all(void)
{
/* STROBE All HiZ */
GPCR0 = SPITZ_GPIO_G0_STROBE_BIT;
GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
GPCR1 = SPITZ_GPIO_G1_STROBE_BIT;
GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
GPCR2 = SPITZ_GPIO_G2_STROBE_BIT;
GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
GPCR3 = SPITZ_GPIO_G3_STROBE_BIT;
GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
}
static inline void spitzkbd_activate_all(void)
{
/* STROBE ALL -> High */
GPSR0 = SPITZ_GPIO_G0_STROBE_BIT;
GPDR0 |= SPITZ_GPIO_G0_STROBE_BIT;
GPSR1 = SPITZ_GPIO_G1_STROBE_BIT;
GPDR1 |= SPITZ_GPIO_G1_STROBE_BIT;
GPSR2 = SPITZ_GPIO_G2_STROBE_BIT;
GPDR2 |= SPITZ_GPIO_G2_STROBE_BIT;
GPSR3 = SPITZ_GPIO_G3_STROBE_BIT;
GPDR3 |= SPITZ_GPIO_G3_STROBE_BIT;
udelay(KB_DISCHARGE_DELAY);
/* Clear any interrupts we may have triggered when altering the GPIO lines */
GEDR0 = SPITZ_GPIO_G0_SENSE_BIT;
GEDR1 = SPITZ_GPIO_G1_SENSE_BIT;
GEDR2 = SPITZ_GPIO_G2_SENSE_BIT;
GEDR3 = SPITZ_GPIO_G3_SENSE_BIT;
}
static inline void spitzkbd_activate_col(int col)
{
int gpio = spitz_strobes[col];
GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
GPSR(gpio) = GPIO_bit(gpio);
GPDR(gpio) |= GPIO_bit(gpio);
}
static inline void spitzkbd_reset_col(int col)
{
int gpio = spitz_strobes[col];
GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
GPCR(gpio) = GPIO_bit(gpio);
GPDR(gpio) |= GPIO_bit(gpio);
}
static inline int spitzkbd_get_row_status(int col)
{
return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02)
| ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08)
| ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60);
}
/*
* The spitz keyboard only generates interrupts when a key is pressed.
* When a key is pressed, we enable a timer which then scans the
* keyboard to detect when the key is released.
*/
/* Scan the hardware keyboard and push any changes up through the input layer */
static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data)
{
unsigned int row, col, rowd;
unsigned long flags;
unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0);
if (spitzkbd_data->suspended)
return;
spin_lock_irqsave(&spitzkbd_data->lock, flags);
num_pressed = 0;
for (col = 0; col < KB_COLS; col++) {
/*
* Discharge the output driver capacitatance
* in the keyboard matrix. (Yes it is significant..)
*/
spitzkbd_discharge_all();
udelay(KB_DISCHARGE_DELAY);
spitzkbd_activate_col(col);
udelay(KB_ACTIVATE_DELAY);
rowd = spitzkbd_get_row_status(col);
for (row = 0; row < KB_ROWS; row++) {
unsigned int scancode, pressed;
scancode = SCANCODE(row, col);
pressed = rowd & KB_ROWMASK(row);
input_report_key(spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed);
if (pressed)
num_pressed++;
}
spitzkbd_reset_col(col);
}
spitzkbd_activate_all();
input_report_key(spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 );
input_report_key(spitzkbd_data->input, KEY_SUSPEND, pwrkey);
if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) {
input_event(spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1);
spitzkbd_data->suspend_jiffies = jiffies;
}
input_sync(spitzkbd_data->input);
/* if any keys are pressed, enable the timer */
if (num_pressed)
mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL));
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
}
/*
* spitz keyboard interrupt handler.
*/
static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id)
{
struct spitzkbd *spitzkbd_data = dev_id;
if (!timer_pending(&spitzkbd_data->timer)) {
/** wait chattering delay **/
udelay(20);
spitzkbd_scankeyboard(spitzkbd_data);
}
return IRQ_HANDLED;
}
/*
* spitz timer checking for released keys
*/
static void spitzkbd_timer_callback(unsigned long data)
{
struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
spitzkbd_scankeyboard(spitzkbd_data);
}
/*
* The hinge switches generate an interrupt.
* We debounce the switches and pass them to the input system.
*/
static irqreturn_t spitzkbd_hinge_isr(int irq, void *dev_id)
{
struct spitzkbd *spitzkbd_data = dev_id;
if (!timer_pending(&spitzkbd_data->htimer))
mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
return IRQ_HANDLED;
}
#define HINGE_STABLE_COUNT 2
static int sharpsl_hinge_state;
static int hinge_count;
static void spitzkbd_hinge_timer(unsigned long data)
{
struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
unsigned long state;
unsigned long flags;
state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
if (state != sharpsl_hinge_state) {
hinge_count = 0;
sharpsl_hinge_state = state;
} else if (hinge_count < HINGE_STABLE_COUNT) {
hinge_count++;
}
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&spitzkbd_data->lock, flags);
input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
input_sync(spitzkbd_data->input);
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
} else {
mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
}
}
#ifdef CONFIG_PM
static int spitzkbd_suspend(struct platform_device *dev, pm_message_t state)
{
int i;
struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
spitzkbd->suspended = 1;
/* Set Strobe lines as inputs - *except* strobe line 0 leave this
enabled so we can detect a power button press for resume */
for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++)
pxa_gpio_mode(spitz_strobes[i] | GPIO_IN);
return 0;
}
static int spitzkbd_resume(struct platform_device *dev)
{
int i;
struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
/* Upon resume, ignore the suspend key for a short while */
spitzkbd->suspend_jiffies = jiffies;
spitzkbd->suspended = 0;
return 0;
}
#else
#define spitzkbd_suspend NULL
#define spitzkbd_resume NULL
#endif
static int __devinit spitzkbd_probe(struct platform_device *dev)
{
struct spitzkbd *spitzkbd;
struct input_dev *input_dev;
int i, err = -ENOMEM;
spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL);
input_dev = input_allocate_device();
if (!spitzkbd || !input_dev)
goto fail;
platform_set_drvdata(dev, spitzkbd);
strcpy(spitzkbd->phys, "spitzkbd/input0");
spin_lock_init(&spitzkbd->lock);
/* Init Keyboard rescan timer */
init_timer(&spitzkbd->timer);
spitzkbd->timer.function = spitzkbd_timer_callback;
spitzkbd->timer.data = (unsigned long) spitzkbd;
/* Init Hinge Timer */
init_timer(&spitzkbd->htimer);
spitzkbd->htimer.function = spitzkbd_hinge_timer;
spitzkbd->htimer.data = (unsigned long) spitzkbd;
spitzkbd->suspend_jiffies = jiffies;
spitzkbd->input = input_dev;
input_dev->name = "Spitz Keyboard";
input_dev->phys = spitzkbd->phys;
input_dev->dev.parent = &dev->dev;
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
BIT_MASK(EV_PWR) | BIT_MASK(EV_SW);
input_dev->keycode = spitzkbd->keycode;
input_dev->keycodesize = sizeof(unsigned char);
input_dev->keycodemax = ARRAY_SIZE(spitzkbd_keycode);
memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode));
for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
set_bit(spitzkbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
set_bit(KEY_SUSPEND, input_dev->keybit);
set_bit(SW_LID, input_dev->swbit);
set_bit(SW_TABLET_MODE, input_dev->swbit);
set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
err = input_register_device(input_dev);
if (err)
goto fail;
mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) {
pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt,
IRQF_DISABLED|IRQF_TRIGGER_RISING,
"Spitzkbd Sense", spitzkbd))
printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i);
}
/* Set Strobe lines as outputs - set high */
for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_SWA | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN);
request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd Sync", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd PwrOn", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWA", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWB", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd HP", spitzkbd);
return 0;
fail: input_free_device(input_dev);
kfree(spitzkbd);
return err;
}
static int __devexit spitzkbd_remove(struct platform_device *dev)
{
int i;
struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++)
free_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd);
del_timer_sync(&spitzkbd->htimer);
del_timer_sync(&spitzkbd->timer);
input_unregister_device(spitzkbd->input);
kfree(spitzkbd);
return 0;
}
static struct platform_driver spitzkbd_driver = {
.probe = spitzkbd_probe,
.remove = __devexit_p(spitzkbd_remove),
.suspend = spitzkbd_suspend,
.resume = spitzkbd_resume,
.driver = {
.name = "spitz-keyboard",
.owner = THIS_MODULE,
},
};
static int __init spitzkbd_init(void)
{
return platform_driver_register(&spitzkbd_driver);
}
static void __exit spitzkbd_exit(void)
{
platform_driver_unregister(&spitzkbd_driver);
}
module_init(spitzkbd_init);
module_exit(spitzkbd_exit);
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Spitz Keyboard Driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:spitz-keyboard");

View File

@ -1,431 +0,0 @@
/*
* Keyboard driver for Sharp Tosa models (SL-6000x)
*
* Copyright (c) 2005 Dirk Opfer
* Copyright (c) 2007 Dmitry Baryshkov
*
* Based on xtkbd.c/locomkbd.c/corgikbd.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <mach/gpio.h>
#include <mach/tosa.h>
#define KB_ROWMASK(r) (1 << (r))
#define SCANCODE(r, c) (((r)<<4) + (c) + 1)
#define NR_SCANCODES SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1
#define SCAN_INTERVAL (HZ/10)
#define KB_DISCHARGE_DELAY 10
#define KB_ACTIVATE_DELAY 10
static unsigned short tosakbd_keycode[NR_SCANCODES] = {
0,
0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P,
0, 0, 0, 0, 0, 0, 0, 0,
KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA,
0, 0, 0, 0, 0, 0, 0, 0,
KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT,
0, 0, 0, 0, 0, 0, 0, 0,
KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK,
KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0,
KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT,
0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,
KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0,
0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0,
KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT,
0, 0, 0,
};
struct tosakbd {
unsigned short keycode[ARRAY_SIZE(tosakbd_keycode)];
struct input_dev *input;
bool suspended;
spinlock_t lock; /* protect kbd scanning */
struct timer_list timer;
};
/* Helper functions for reading the keyboard matrix
* Note: We should really be using the generic gpio functions to alter
* GPDR but it requires a function call per GPIO bit which is
* excessive when we need to access 12 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
#define GET_ROWS_STATUS(c) ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT)
static inline void tosakbd_discharge_all(void)
{
/* STROBE All HiZ */
GPCR1 = TOSA_GPIO_HIGH_STROBE_BIT;
GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT;
GPCR2 = TOSA_GPIO_LOW_STROBE_BIT;
GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT;
}
static inline void tosakbd_activate_all(void)
{
/* STROBE ALL -> High */
GPSR1 = TOSA_GPIO_HIGH_STROBE_BIT;
GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT;
GPSR2 = TOSA_GPIO_LOW_STROBE_BIT;
GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT;
udelay(KB_DISCHARGE_DELAY);
/* STATE CLEAR */
GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT;
}
static inline void tosakbd_activate_col(int col)
{
if (col <= 5) {
/* STROBE col -> High, not col -> HiZ */
GPSR1 = TOSA_GPIO_STROBE_BIT(col);
GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
} else {
/* STROBE col -> High, not col -> HiZ */
GPSR2 = TOSA_GPIO_STROBE_BIT(col);
GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
}
}
static inline void tosakbd_reset_col(int col)
{
if (col <= 5) {
/* STROBE col -> Low */
GPCR1 = TOSA_GPIO_STROBE_BIT(col);
/* STROBE col -> out, not col -> HiZ */
GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
} else {
/* STROBE col -> Low */
GPCR2 = TOSA_GPIO_STROBE_BIT(col);
/* STROBE col -> out, not col -> HiZ */
GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
}
}
/*
* The tosa keyboard only generates interrupts when a key is pressed.
* So when a key is pressed, we enable a timer. This timer scans the
* keyboard, and this is how we detect when the key is released.
*/
/* Scan the hardware keyboard and push any changes up through the input layer */
static void tosakbd_scankeyboard(struct platform_device *dev)
{
struct tosakbd *tosakbd = platform_get_drvdata(dev);
unsigned int row, col, rowd;
unsigned long flags;
unsigned int num_pressed = 0;
spin_lock_irqsave(&tosakbd->lock, flags);
if (tosakbd->suspended)
goto out;
for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) {
/*
* Discharge the output driver capacitatance
* in the keyboard matrix. (Yes it is significant..)
*/
tosakbd_discharge_all();
udelay(KB_DISCHARGE_DELAY);
tosakbd_activate_col(col);
udelay(KB_ACTIVATE_DELAY);
rowd = GET_ROWS_STATUS(col);
for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) {
unsigned int scancode, pressed;
scancode = SCANCODE(row, col);
pressed = rowd & KB_ROWMASK(row);
if (pressed && !tosakbd->keycode[scancode])
dev_warn(&dev->dev,
"unhandled scancode: 0x%02x\n",
scancode);
input_report_key(tosakbd->input,
tosakbd->keycode[scancode],
pressed);
if (pressed)
num_pressed++;
}
tosakbd_reset_col(col);
}
tosakbd_activate_all();
input_sync(tosakbd->input);
/* if any keys are pressed, enable the timer */
if (num_pressed)
mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL);
out:
spin_unlock_irqrestore(&tosakbd->lock, flags);
}
/*
* tosa keyboard interrupt handler.
*/
static irqreturn_t tosakbd_interrupt(int irq, void *__dev)
{
struct platform_device *dev = __dev;
struct tosakbd *tosakbd = platform_get_drvdata(dev);
if (!timer_pending(&tosakbd->timer)) {
/** wait chattering delay **/
udelay(20);
tosakbd_scankeyboard(dev);
}
return IRQ_HANDLED;
}
/*
* tosa timer checking for released keys
*/
static void tosakbd_timer_callback(unsigned long __dev)
{
struct platform_device *dev = (struct platform_device *)__dev;
tosakbd_scankeyboard(dev);
}
#ifdef CONFIG_PM
static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
{
struct tosakbd *tosakbd = platform_get_drvdata(dev);
unsigned long flags;
spin_lock_irqsave(&tosakbd->lock, flags);
tosakbd->suspended = true;
spin_unlock_irqrestore(&tosakbd->lock, flags);
del_timer_sync(&tosakbd->timer);
return 0;
}
static int tosakbd_resume(struct platform_device *dev)
{
struct tosakbd *tosakbd = platform_get_drvdata(dev);
tosakbd->suspended = false;
tosakbd_scankeyboard(dev);
return 0;
}
#else
#define tosakbd_suspend NULL
#define tosakbd_resume NULL
#endif
static int __devinit tosakbd_probe(struct platform_device *pdev) {
int i;
struct tosakbd *tosakbd;
struct input_dev *input_dev;
int error;
tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL);
if (!tosakbd)
return -ENOMEM;
input_dev = input_allocate_device();
if (!input_dev) {
kfree(tosakbd);
return -ENOMEM;
}
platform_set_drvdata(pdev, tosakbd);
spin_lock_init(&tosakbd->lock);
/* Init Keyboard rescan timer */
init_timer(&tosakbd->timer);
tosakbd->timer.function = tosakbd_timer_callback;
tosakbd->timer.data = (unsigned long) pdev;
tosakbd->input = input_dev;
input_set_drvdata(input_dev, tosakbd);
input_dev->name = "Tosa Keyboard";
input_dev->phys = "tosakbd/input0";
input_dev->dev.parent = &pdev->dev;
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
input_dev->keycode = tosakbd->keycode;
input_dev->keycodesize = sizeof(tosakbd->keycode[0]);
input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode);
memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode));
for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++)
__set_bit(tosakbd->keycode[i], input_dev->keybit);
__clear_bit(KEY_RESERVED, input_dev->keybit);
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
int gpio = TOSA_GPIO_KEY_SENSE(i);
int irq;
error = gpio_request(gpio, "tosakbd");
if (error < 0) {
printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
" error %d\n", gpio, error);
goto fail;
}
error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i));
if (error < 0) {
printk(KERN_ERR "tosakbd: failed to configure input"
" direction for GPIO %d, error %d\n",
gpio, error);
gpio_free(gpio);
goto fail;
}
irq = gpio_to_irq(gpio);
if (irq < 0) {
error = irq;
printk(KERN_ERR "gpio-keys: Unable to get irq number"
" for GPIO %d, error %d\n",
gpio, error);
gpio_free(gpio);
goto fail;
}
error = request_irq(irq, tosakbd_interrupt,
IRQF_DISABLED | IRQF_TRIGGER_RISING,
"tosakbd", pdev);
if (error) {
printk("tosakbd: Can't get IRQ: %d: error %d!\n",
irq, error);
gpio_free(gpio);
goto fail;
}
}
/* Set Strobe lines as outputs - set high */
for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) {
int gpio = TOSA_GPIO_KEY_STROBE(i);
error = gpio_request(gpio, "tosakbd");
if (error < 0) {
printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
" error %d\n", gpio, error);
goto fail2;
}
error = gpio_direction_output(gpio, 1);
if (error < 0) {
printk(KERN_ERR "tosakbd: failed to configure input"
" direction for GPIO %d, error %d\n",
gpio, error);
gpio_free(gpio);
goto fail2;
}
}
error = input_register_device(input_dev);
if (error) {
printk(KERN_ERR "tosakbd: Unable to register input device, "
"error: %d\n", error);
goto fail2;
}
printk(KERN_INFO "input: Tosa Keyboard Registered\n");
return 0;
fail2:
while (--i >= 0)
gpio_free(TOSA_GPIO_KEY_STROBE(i));
i = TOSA_KEY_SENSE_NUM;
fail:
while (--i >= 0) {
free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev);
gpio_free(TOSA_GPIO_KEY_SENSE(i));
}
platform_set_drvdata(pdev, NULL);
input_free_device(input_dev);
kfree(tosakbd);
return error;
}
static int __devexit tosakbd_remove(struct platform_device *dev)
{
int i;
struct tosakbd *tosakbd = platform_get_drvdata(dev);
for (i = 0; i < TOSA_KEY_STROBE_NUM; i++)
gpio_free(TOSA_GPIO_KEY_STROBE(i));
for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev);
gpio_free(TOSA_GPIO_KEY_SENSE(i));
}
del_timer_sync(&tosakbd->timer);
input_unregister_device(tosakbd->input);
kfree(tosakbd);
return 0;
}
static struct platform_driver tosakbd_driver = {
.probe = tosakbd_probe,
.remove = __devexit_p(tosakbd_remove),
.suspend = tosakbd_suspend,
.resume = tosakbd_resume,
.driver = {
.name = "tosa-keyboard",
.owner = THIS_MODULE,
},
};
static int __devinit tosakbd_init(void)
{
return platform_driver_register(&tosakbd_driver);
}
static void __exit tosakbd_exit(void)
{
platform_driver_unregister(&tosakbd_driver);
}
module_init(tosakbd_init);
module_exit(tosakbd_exit);
MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
MODULE_DESCRIPTION("Tosa Keyboard Driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:tosa-keyboard");