Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"

This reverts commit 68677ab3d0.

A smoother migration path would be making corgi_ts.c and other drivers
depending on corgi_ssp.c and corgi_lcd.c to depend on BROKEN instead,
and still allows those to exist around for some time.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
This commit is contained in:
Eric Miao 2008-10-21 09:42:29 +08:00
parent 0cfd81031a
commit 25af3b0f75
5 changed files with 583 additions and 2 deletions

View File

@ -0,0 +1,290 @@
/*
* linux/arch/arm/mach-pxa/corgi_lcd.c
*
* Corgi/Spitz LCD Specific Code
*
* Copyright (C) 2005 Richard Purdie
*
* Connectivity:
* Corgi - LCD to ATI Imageon w100 (Wallaby)
* Spitz - LCD to PXA Framebuffer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/string.h>
#include <mach/akita.h>
#include <mach/corgi.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/sharpsl.h>
#include <mach/spitz.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
/* Register Addresses */
#define RESCTL_ADRS 0x00
#define PHACTRL_ADRS 0x01
#define DUTYCTRL_ADRS 0x02
#define POWERREG0_ADRS 0x03
#define POWERREG1_ADRS 0x04
#define GPOR3_ADRS 0x05
#define PICTRL_ADRS 0x06
#define POLCTRL_ADRS 0x07
/* Register Bit Definitions */
#define RESCTL_QVGA 0x01
#define RESCTL_VGA 0x00
#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
#define PICTRL_INIT_STATE 0x01
#define PICTRL_INIOFF 0x02
#define PICTRL_POWER_DOWN 0x04
#define PICTRL_COM_SIGNAL_OFF 0x08
#define PICTRL_DAC_SIGNAL_OFF 0x10
#define POLCTRL_SYNC_POL_FALL 0x01
#define POLCTRL_EN_POL_FALL 0x02
#define POLCTRL_DATA_POL_FALL 0x04
#define POLCTRL_SYNC_ACT_H 0x08
#define POLCTRL_EN_ACT_L 0x10
#define POLCTRL_SYNC_POL_RISE 0x00
#define POLCTRL_EN_POL_RISE 0x00
#define POLCTRL_DATA_POL_RISE 0x00
#define POLCTRL_SYNC_ACT_L 0x00
#define POLCTRL_EN_ACT_H 0x00
#define PHACTRL_PHASE_MANUAL 0x01
#define DEFAULT_PHAD_QVGA (9)
#define DEFAULT_COMADJ (125)
/*
* This is only a psuedo I2C interface. We can't use the standard kernel
* routines as the interface is write only. We just assume the data is acked...
*/
static void lcdtg_ssp_i2c_send(u8 data)
{
corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
udelay(10);
}
static void lcdtg_i2c_send_bit(u8 data)
{
lcdtg_ssp_i2c_send(data);
lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(data);
}
static void lcdtg_i2c_send_start(u8 base)
{
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(base);
}
static void lcdtg_i2c_send_stop(u8 base)
{
lcdtg_ssp_i2c_send(base);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
}
static void lcdtg_i2c_send_byte(u8 base, u8 data)
{
int i;
for (i = 0; i < 8; i++) {
if (data & 0x80)
lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
else
lcdtg_i2c_send_bit(base);
data <<= 1;
}
}
static void lcdtg_i2c_wait_ack(u8 base)
{
lcdtg_i2c_send_bit(base);
}
static void lcdtg_set_common_voltage(u8 base_data, u8 data)
{
/* Set Common Voltage to M62332FP via I2C */
lcdtg_i2c_send_start(base_data);
lcdtg_i2c_send_byte(base_data, 0x9c);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_byte(base_data, 0x00);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_byte(base_data, data);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_stop(base_data);
}
/* Set Phase Adjust */
static void lcdtg_set_phadadj(int mode)
{
int adj;
switch(mode) {
case 480:
case 640:
/* Setting for VGA */
adj = sharpsl_param.phadadj;
if (adj < 0) {
adj = PHACTRL_PHASE_MANUAL;
} else {
adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
}
break;
case 240:
case 320:
default:
/* Setting for QVGA */
adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
break;
}
corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
}
static int lcd_inited;
void corgi_lcdtg_hw_init(int mode)
{
if (!lcd_inited) {
int comadj;
/* Initialize Internal Logic & Port */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
| POWER0_COM_OFF | POWER0_VCC5_OFF);
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
/* VDD(+8V), SVSS(-4V) ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
mdelay(3);
/* DAC ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
| POWER0_COM_OFF | POWER0_VCC5_OFF);
/* INIB = H, INI = L */
/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
/* Set Common Voltage */
comadj = sharpsl_param.comadj;
if (comadj < 0)
comadj = DEFAULT_COMADJ;
lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
/* VCC5 ON, DAC ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
POWER0_COM_OFF | POWER0_VCC5_ON);
/* GVSS(-8V) ON, VDD ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
mdelay(2);
/* COM SIGNAL ON (PICTL[3] = L) */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
/* COM ON, DAC ON, VCC5_ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
| POWER0_COM_ON | POWER0_VCC5_ON);
/* VW ON, GVSS ON, VDD ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
/* Signals output enable */
corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
/* Set Phase Adjust */
lcdtg_set_phadadj(mode);
/* Initialize for Input Signals from ATI */
corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
udelay(1000);
lcd_inited=1;
} else {
lcdtg_set_phadadj(mode);
}
switch(mode) {
case 480:
case 640:
/* Set Lcd Resolution (VGA) */
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
break;
case 240:
case 320:
default:
/* Set Lcd Resolution (QVGA) */
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
break;
}
}
void corgi_lcdtg_suspend(void)
{
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
mdelay(34);
/* (1)VW OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
/* (2)COM OFF */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
/* (3)Set Common Voltage Bias 0V */
lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
/* (4)GVSS OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
/* (5)VCC5 OFF */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
/* (6)Set PDWN, INIOFF, DACOFF */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
/* (7)DAC OFF */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
/* (8)VDD OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
lcd_inited = 0;
}

View File

@ -0,0 +1,276 @@
/*
* SSP control code for Sharp Corgi devices
*
* Copyright (c) 2004-2005 Richard Purdie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/ssp.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/regs-ssp.h>
#include "sharpsl.h"
static DEFINE_SPINLOCK(corgi_ssp_lock);
static struct ssp_dev corgi_ssp_dev;
static struct ssp_state corgi_ssp_state;
static struct corgissp_machinfo *ssp_machinfo;
/*
* There are three devices connected to the SSP interface:
* 1. A touchscreen controller (TI ADS7846 compatible)
* 2. An LCD controller (with some Backlight functionality)
* 3. A battery monitoring IC (Maxim MAX1111)
*
* Each device uses a different speed/mode of communication.
*
* The touchscreen is very sensitive and the most frequently used
* so the port is left configured for this.
*
* Devices are selected using Chip Selects on GPIOs.
*/
/*
* ADS7846 Routines
*/
unsigned long corgi_ssp_ads7846_putget(ulong data)
{
unsigned long flag;
u32 ret = 0;
spin_lock_irqsave(&corgi_ssp_lock, flag);
if (ssp_machinfo->cs_ads7846 >= 0)
GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
ssp_write_word(&corgi_ssp_dev,data);
ssp_read_word(&corgi_ssp_dev, &ret);
if (ssp_machinfo->cs_ads7846 >= 0)
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
return ret;
}
/*
* NOTE: These functions should always be called in interrupt context
* and use the _lock and _unlock functions. They are very time sensitive.
*/
void corgi_ssp_ads7846_lock(void)
{
spin_lock(&corgi_ssp_lock);
if (ssp_machinfo->cs_ads7846 >= 0)
GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
}
void corgi_ssp_ads7846_unlock(void)
{
if (ssp_machinfo->cs_ads7846 >= 0)
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
spin_unlock(&corgi_ssp_lock);
}
void corgi_ssp_ads7846_put(ulong data)
{
ssp_write_word(&corgi_ssp_dev,data);
}
unsigned long corgi_ssp_ads7846_get(void)
{
u32 ret = 0;
ssp_read_word(&corgi_ssp_dev, &ret);
return ret;
}
EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
EXPORT_SYMBOL(corgi_ssp_ads7846_put);
EXPORT_SYMBOL(corgi_ssp_ads7846_get);
/*
* LCD/Backlight Routines
*/
unsigned long corgi_ssp_dac_put(ulong data)
{
unsigned long flag, sscr1 = SSCR1_SPH;
u32 tmp;
spin_lock_irqsave(&corgi_ssp_lock, flag);
if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
sscr1 = 0;
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
ssp_enable(&corgi_ssp_dev);
if (ssp_machinfo->cs_lcdcon >= 0)
GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
ssp_write_word(&corgi_ssp_dev,data);
/* Read null data back from device to prevent SSP overflow */
ssp_read_word(&corgi_ssp_dev, &tmp);
if (ssp_machinfo->cs_lcdcon >= 0)
GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
return 0;
}
void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
{
corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
}
void corgi_ssp_blduty_set(int duty)
{
corgi_ssp_lcdtg_send(0x02,duty);
}
EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
EXPORT_SYMBOL(corgi_ssp_blduty_set);
/*
* Max1111 Routines
*/
int corgi_ssp_max1111_get(ulong data)
{
unsigned long flag;
long voltage = 0, voltage1 = 0, voltage2 = 0;
spin_lock_irqsave(&corgi_ssp_lock, flag);
if (ssp_machinfo->cs_max1111 >= 0)
GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
ssp_enable(&corgi_ssp_dev);
udelay(1);
/* TB1/RB1 */
ssp_write_word(&corgi_ssp_dev,data);
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
/* TB12/RB2 */
ssp_write_word(&corgi_ssp_dev,0);
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
/* TB13/RB3*/
ssp_write_word(&corgi_ssp_dev,0);
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
if (ssp_machinfo->cs_max1111 >= 0)
GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
if (voltage1 & 0xc0 || voltage2 & 0x3f)
voltage = -1;
else
voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
return voltage;
}
EXPORT_SYMBOL(corgi_ssp_max1111_get);
/*
* Support Routines
*/
void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
{
ssp_machinfo = machinfo;
}
static int __init corgi_ssp_probe(struct platform_device *dev)
{
int ret;
/* Chip Select - Disable All */
if (ssp_machinfo->cs_lcdcon >= 0)
pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH);
if (ssp_machinfo->cs_max1111 >= 0)
pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
if (ssp_machinfo->cs_ads7846 >= 0)
pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
if (ret)
printk(KERN_ERR "Unable to register SSP handler!\n");
else {
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
}
return ret;
}
static int corgi_ssp_remove(struct platform_device *dev)
{
ssp_exit(&corgi_ssp_dev);
return 0;
}
static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
{
ssp_flush(&corgi_ssp_dev);
ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
return 0;
}
static int corgi_ssp_resume(struct platform_device *dev)
{
if (ssp_machinfo->cs_lcdcon >= 0)
GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
if (ssp_machinfo->cs_max1111 >= 0)
GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
if (ssp_machinfo->cs_ads7846 >= 0)
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
ssp_enable(&corgi_ssp_dev);
return 0;
}
static struct platform_driver corgissp_driver = {
.probe = corgi_ssp_probe,
.remove = corgi_ssp_remove,
.suspend = corgi_ssp_suspend,
.resume = corgi_ssp_resume,
.driver = {
.name = "corgi-ssp",
},
};
int __init corgi_ssp_init(void)
{
return platform_driver_register(&corgissp_driver);
}
arch_initcall(corgi_ssp_init);

View File

@ -113,6 +113,7 @@
* Shared data structures
*/
extern struct platform_device corgiscoop_device;
extern struct platform_device corgissp_device;
#endif /* __ASM_ARCH_CORGI_H */

View File

@ -187,4 +187,5 @@
*/
extern struct platform_device spitzscoop_device;
extern struct platform_device spitzscoop2_device;
extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;

View File

@ -116,20 +116,33 @@ struct battery_thresh spitz_battery_levels_noac[] = {
{ 0, 0},
};
/* MAX1111 Commands */
#define MAXCTRL_PD0 1u << 0
#define MAXCTRL_PD1 1u << 1
#define MAXCTRL_SGL 1u << 2
#define MAXCTRL_UNI 1u << 3
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR 1u << 7
/*
* Read MAX1111 ADC
*/
extern int max1111_read_channel(int);
int sharpsl_pm_pxa_read_max1111(int channel)
{
if (machine_is_tosa()) // Ugly, better move this function into another module
return 0;
#ifdef CONFIG_SENSORS_MAX1111
extern int max1111_read_channel(int);
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/
return max1111_read_channel(channel >> 1);
#else
return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
#endif
}
void sharpsl_pm_pxa_init(void)