hpt366: simplify UltraDMA filtering (take 4)
Simplify UltraDMA mode filtering in the driver: - make use of the newly introduced 'udma_mask' field of 'ide_pci_device_t' to set the correct hwif->ultra_mask, modifying init_setup_hpt366() to select the correct mask based on the chip revision; - replace 'max_mode' field of the 'struct hpt_info' with 'max_ultra' specifying the maximum UltraDMA mode allowed; - rewrite hpt3xx_udma_filter() to differ the filters based on the 'chip_type' field, and only use it for HPT366 and HPT370[A] where it's really necessary. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
ef29888ea8
commit
2648e5d9a8
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/drivers/ide/pci/hpt366.c Version 1.06 Jun 27, 2007
|
||||
* linux/drivers/ide/pci/hpt366.c Version 1.10 Jun 29, 2007
|
||||
*
|
||||
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
|
||||
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
|
||||
|
@ -77,7 +77,7 @@
|
|||
* since they may tamper with its fields
|
||||
* - prefix the driver startup messages with the real chip name
|
||||
* - claim the extra 240 bytes of I/O space for all chips
|
||||
* - optimize the rate masking/filtering and the drive list lookup code
|
||||
* - optimize the UltraDMA filtering and the drive list lookup code
|
||||
* - use pci_get_slot() to get to the function 1 of HPT36x/374
|
||||
* - cache offset of the channel's misc. control registers (MCRs) being used
|
||||
* throughout the driver
|
||||
|
@ -99,9 +99,9 @@
|
|||
* stop duplicating it for each channel by storing the pointer in the pci_dev
|
||||
* structure: first, at the init_setup stage, point it to a static "template"
|
||||
* with only the chip type and its specific base DPLL frequency, the highest
|
||||
* supported DMA mode, and the chip settings table pointer filled, then, at
|
||||
* the init_chipset stage, allocate per-chip instance and fill it with the
|
||||
* rest of the necessary information
|
||||
* UltraDMA mode, and the chip settings table pointer filled, then, at the
|
||||
* init_chipset stage, allocate per-chip instance and fill it with the rest
|
||||
* of the necessary information
|
||||
* - get rid of the constant thresholds in the HPT37x PCI clock detection code,
|
||||
* switch to calculating PCI clock frequency based on the chip's base DPLL
|
||||
* frequency
|
||||
|
@ -112,6 +112,7 @@
|
|||
* also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips;
|
||||
* unify HPT36x/37x timing setup code and the speedproc handlers by joining
|
||||
* the register setting lists into the table indexed by the clock selected
|
||||
* - set the correct hwif->ultra_mask for each individual chip
|
||||
* Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
|
||||
*/
|
||||
|
||||
|
@ -391,7 +392,7 @@ enum ata_clock {
|
|||
|
||||
struct hpt_info {
|
||||
u8 chip_type; /* Chip type */
|
||||
u8 max_mode; /* Speeds allowed */
|
||||
u8 max_ultra; /* Max. UltraDMA mode allowed */
|
||||
u8 dpll_clk; /* DPLL clock in MHz */
|
||||
u8 pci_clk; /* PCI clock in MHz */
|
||||
u32 **settings; /* Chipset settings table */
|
||||
|
@ -430,77 +431,77 @@ static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
|
|||
|
||||
static struct hpt_info hpt36x __devinitdata = {
|
||||
.chip_type = HPT36x,
|
||||
.max_mode = (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1,
|
||||
.max_ultra = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? 4 : 3) : 2,
|
||||
.dpll_clk = 0, /* no DPLL */
|
||||
.settings = hpt36x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt370 __devinitdata = {
|
||||
.chip_type = HPT370,
|
||||
.max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2,
|
||||
.max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4,
|
||||
.dpll_clk = 48,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt370a __devinitdata = {
|
||||
.chip_type = HPT370A,
|
||||
.max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2,
|
||||
.max_ultra = HPT370_ALLOW_ATA100_5 ? 5 : 4,
|
||||
.dpll_clk = 48,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt374 __devinitdata = {
|
||||
.chip_type = HPT374,
|
||||
.max_mode = 3,
|
||||
.max_ultra = 5,
|
||||
.dpll_clk = 48,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt372 __devinitdata = {
|
||||
.chip_type = HPT372,
|
||||
.max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
|
||||
.max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
|
||||
.dpll_clk = 55,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt372a __devinitdata = {
|
||||
.chip_type = HPT372A,
|
||||
.max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
|
||||
.max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
|
||||
.dpll_clk = 66,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt302 __devinitdata = {
|
||||
.chip_type = HPT302,
|
||||
.max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3,
|
||||
.max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
|
||||
.dpll_clk = 66,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt371 __devinitdata = {
|
||||
.chip_type = HPT371,
|
||||
.max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3,
|
||||
.max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5,
|
||||
.dpll_clk = 66,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt372n __devinitdata = {
|
||||
.chip_type = HPT372N,
|
||||
.max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
|
||||
.max_ultra = HPT372_ALLOW_ATA133_6 ? 6 : 5,
|
||||
.dpll_clk = 77,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt302n __devinitdata = {
|
||||
.chip_type = HPT302N,
|
||||
.max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3,
|
||||
.max_ultra = HPT302_ALLOW_ATA133_6 ? 6 : 5,
|
||||
.dpll_clk = 77,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
||||
static struct hpt_info hpt371n __devinitdata = {
|
||||
.chip_type = HPT371N,
|
||||
.max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3,
|
||||
.max_ultra = HPT371_ALLOW_ATA133_6 ? 6 : 5,
|
||||
.dpll_clk = 77,
|
||||
.settings = hpt37x_settings
|
||||
};
|
||||
|
@ -523,53 +524,38 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
|
|||
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
|
||||
{
|
||||
struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev);
|
||||
u8 chip_type = info->chip_type;
|
||||
u8 mode = info->max_mode;
|
||||
u8 mask;
|
||||
|
||||
switch (mode) {
|
||||
case 0x04:
|
||||
mask = 0x7f;
|
||||
break;
|
||||
case 0x03:
|
||||
switch (info->chip_type) {
|
||||
case HPT370A:
|
||||
if (!HPT370_ALLOW_ATA100_5 ||
|
||||
check_in_drive_list(drive, bad_ata100_5))
|
||||
return 0x1f;
|
||||
else
|
||||
return 0x3f;
|
||||
case HPT370:
|
||||
if (!HPT370_ALLOW_ATA100_5 ||
|
||||
check_in_drive_list(drive, bad_ata100_5))
|
||||
mask = 0x1f;
|
||||
else
|
||||
mask = 0x3f;
|
||||
if (chip_type >= HPT374)
|
||||
break;
|
||||
if (!check_in_drive_list(drive, bad_ata100_5))
|
||||
goto check_bad_ata33;
|
||||
/* fall thru */
|
||||
case 0x02:
|
||||
break;
|
||||
case HPT36x:
|
||||
if (!HPT366_ALLOW_ATA66_4 ||
|
||||
check_in_drive_list(drive, bad_ata66_4))
|
||||
mask = 0x0f;
|
||||
else
|
||||
mask = 0x1f;
|
||||
|
||||
/*
|
||||
* CHECK ME, Does this need to be changed to HPT374 ??
|
||||
*/
|
||||
if (chip_type >= HPT370)
|
||||
goto check_bad_ata33;
|
||||
if (HPT366_ALLOW_ATA66_4 &&
|
||||
!check_in_drive_list(drive, bad_ata66_4))
|
||||
goto check_bad_ata33;
|
||||
|
||||
mask = 0x0f;
|
||||
if (HPT366_ALLOW_ATA66_3 &&
|
||||
!check_in_drive_list(drive, bad_ata66_3))
|
||||
goto check_bad_ata33;
|
||||
/* fall thru */
|
||||
case 0x01:
|
||||
if (!HPT366_ALLOW_ATA66_3 ||
|
||||
check_in_drive_list(drive, bad_ata66_3))
|
||||
mask = 0x07;
|
||||
|
||||
check_bad_ata33:
|
||||
if (chip_type >= HPT370A)
|
||||
break;
|
||||
if (!check_in_drive_list(drive, bad_ata33))
|
||||
break;
|
||||
/* fall thru */
|
||||
case 0x00:
|
||||
default:
|
||||
mask = 0x00;
|
||||
break;
|
||||
break;
|
||||
default:
|
||||
return 0x7f;
|
||||
}
|
||||
return mask;
|
||||
|
||||
return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
|
||||
}
|
||||
|
||||
static u32 get_speed_setting(u8 speed, struct hpt_info *info)
|
||||
|
@ -1150,7 +1136,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
|
|||
* Select 66 MHz DPLL clock only if UltraATA/133 mode is
|
||||
* supported/enabled, use 50 MHz DPLL clock otherwise...
|
||||
*/
|
||||
if (info->max_mode == 0x04) {
|
||||
if (info->max_ultra == 6) {
|
||||
dpll_clk = 66;
|
||||
clock = ATA_CLOCK_66MHZ;
|
||||
} else if (dpll_clk) { /* HPT36x chips don't have DPLL */
|
||||
|
@ -1243,7 +1229,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||
struct pci_dev *dev = hwif->pci_dev;
|
||||
struct hpt_info *info = pci_get_drvdata(dev);
|
||||
int serialize = HPT_SERIALIZE_IO;
|
||||
u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02;
|
||||
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
|
||||
u8 chip_type = info->chip_type;
|
||||
u8 new_mcr, old_mcr = 0;
|
||||
|
||||
|
@ -1256,7 +1242,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||
hwif->intrproc = &hpt3xx_intrproc;
|
||||
hwif->maskproc = &hpt3xx_maskproc;
|
||||
hwif->busproc = &hpt3xx_busproc;
|
||||
hwif->udma_filter = &hpt3xx_udma_filter;
|
||||
|
||||
if (chip_type <= HPT370A)
|
||||
hwif->udma_filter = &hpt3xx_udma_filter;
|
||||
|
||||
/*
|
||||
* HPT3xxN chips have some complications:
|
||||
|
@ -1305,7 +1293,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||
return;
|
||||
}
|
||||
|
||||
hwif->ultra_mask = 0x7f;
|
||||
hwif->ultra_mask = hwif->cds->udma_mask;
|
||||
hwif->mwdma_mask = 0x07;
|
||||
|
||||
/*
|
||||
|
@ -1503,9 +1491,35 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
|
|||
|
||||
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
|
||||
|
||||
if (rev > 6)
|
||||
switch (rev) {
|
||||
case 0:
|
||||
case 1:
|
||||
case 2:
|
||||
/*
|
||||
* HPT36x chips have one channel per function and have
|
||||
* both channel enable bits located differently and visible
|
||||
* to both functions -- really stupid design decision... :-(
|
||||
* Bit 4 is for the primary channel, bit 5 for the secondary.
|
||||
*/
|
||||
d->channels = 1;
|
||||
d->enablebits[0].mask = d->enablebits[0].val = 0x10;
|
||||
|
||||
d->udma_mask = HPT366_ALLOW_ATA66_3 ?
|
||||
(HPT366_ALLOW_ATA66_4 ? 0x1f : 0x0f) : 0x07;
|
||||
break;
|
||||
case 3:
|
||||
case 4:
|
||||
d->udma_mask = HPT370_ALLOW_ATA100_5 ? 0x3f : 0x1f;
|
||||
break;
|
||||
default:
|
||||
rev = 6;
|
||||
|
||||
/* fall thru */
|
||||
case 5:
|
||||
case 6:
|
||||
d->udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f;
|
||||
break;
|
||||
}
|
||||
|
||||
d->name = chipset_names[rev];
|
||||
|
||||
pci_set_drvdata(dev, info[rev]);
|
||||
|
@ -1513,15 +1527,6 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
|
|||
if (rev > 2)
|
||||
goto init_single;
|
||||
|
||||
/*
|
||||
* HPT36x chips have one channel per function and have
|
||||
* both channel enable bits located differently and visible
|
||||
* to both functions -- really stupid design decision... :-(
|
||||
* Bit 4 is for the primary channel, bit 5 for the secondary.
|
||||
*/
|
||||
d->channels = 1;
|
||||
d->enablebits[0].mask = d->enablebits[0].val = 0x10;
|
||||
|
||||
if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
|
||||
u8 mcr1 = 0, pin1 = 0, pin2 = 0;
|
||||
int ret;
|
||||
|
@ -1573,6 +1578,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
|
|||
.channels = 2,
|
||||
.autodma = AUTODMA,
|
||||
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
|
||||
.udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
|
||||
.bootable = OFF_BOARD,
|
||||
.extra = 240
|
||||
},{ /* 2 */
|
||||
|
@ -1584,6 +1590,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
|
|||
.channels = 2,
|
||||
.autodma = AUTODMA,
|
||||
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
|
||||
.udma_mask = HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f,
|
||||
.bootable = OFF_BOARD,
|
||||
.extra = 240
|
||||
},{ /* 3 */
|
||||
|
@ -1595,6 +1602,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
|
|||
.channels = 2,
|
||||
.autodma = AUTODMA,
|
||||
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
|
||||
.udma_mask = HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f,
|
||||
.bootable = OFF_BOARD,
|
||||
.extra = 240
|
||||
},{ /* 4 */
|
||||
|
@ -1606,6 +1614,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
|
|||
.channels = 2, /* 4 */
|
||||
.autodma = AUTODMA,
|
||||
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
|
||||
.udma_mask = 0x3f,
|
||||
.bootable = OFF_BOARD,
|
||||
.extra = 240
|
||||
},{ /* 5 */
|
||||
|
@ -1617,6 +1626,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
|
|||
.channels = 2, /* 4 */
|
||||
.autodma = AUTODMA,
|
||||
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
|
||||
.udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
|
||||
.bootable = OFF_BOARD,
|
||||
.extra = 240
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue