staging: rtl8192e: Copy comments from r819XE_phyreg.h to r8192E_phyreg.h

Both files have the same contents (with the exception of comments).
One of them will not survive future commits.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Mateusz Kulikowski 2015-04-13 23:47:25 +02:00 committed by Greg Kroah-Hartman
parent 7b7b0c9bbc
commit 27a3071c6d
1 changed files with 65 additions and 27 deletions

View File

@ -53,10 +53,10 @@
#define MCS_TXAGC 0x340
#define CCK_TXAGC 0x348
/*---------------------0x400~0x4ff----------------------*/
/* Mac block on/off control register */
#define MacBlkCtrl 0x403
#define rFPGA0_RFMOD 0x800
#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC */
#define rFPGA0_TxInfo 0x804
#define rFPGA0_PSDFunction 0x808
#define rFPGA0_TxGainStage 0x80c
@ -98,6 +98,7 @@
#define rFPGA0_XAB_RFInterfaceRB 0x8e0
#define rFPGA0_XCD_RFInterfaceRB 0x8e4
/* Page 9 - RF mode & OFDM TxSC */
#define rFPGA1_RFMOD 0x900
#define rFPGA1_TxBlock 0x904
#define rFPGA1_DebugSelect 0x908
@ -106,14 +107,16 @@
#define rCCK0_System 0xa00
#define rCCK0_AFESetting 0xa04
#define rCCK0_CCA 0xa08
/* AGC default value, saturation level */
#define rCCK0_RxAGC1 0xa0c
#define rCCK0_RxAGC2 0xa10
#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */
#define rCCK0_RxHP 0xa14
/* Timing recovery & channel estimation threshold */
#define rCCK0_DSPParameter1 0xa18
#define rCCK0_DSPParameter2 0xa1c
#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */
#define rCCK0_TxFilter1 0xa20
#define rCCK0_TxFilter2 0xa24
#define rCCK0_DebugPort 0xa28
#define rCCK0_DebugPort 0xa28 /* Debug port and TX filter 3 */
#define rCCK0_FalseAlarmReport 0xa2c
#define rCCK0_TRSSIReport 0xa50
#define rCCK0_RxReport 0xa54
@ -124,22 +127,24 @@
#define rOFDM0_TRxPathEnable 0xc04
#define rOFDM0_TRMuxPar 0xc08
#define rOFDM0_TRSWIsolation 0xc0c
/* RxIQ DC offset, Rx digital filter, DC notch filter */
#define rOFDM0_XARxAFE 0xc10
#define rOFDM0_XARxIQImbalance 0xc14
#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imbalance matrix */
#define rOFDM0_XBRxAFE 0xc18
#define rOFDM0_XBRxIQImbalance 0xc1c
#define rOFDM0_XCRxAFE 0xc20
#define rOFDM0_XCRxIQImbalance 0xc24
#define rOFDM0_XDRxAFE 0xc28
#define rOFDM0_XDRxIQImbalance 0xc2c
#define rOFDM0_RxDetector1 0xc30
#define rOFDM0_RxDetector2 0xc34
#define rOFDM0_RxDetector3 0xc38
#define rOFDM0_RxDetector1 0xc30 /* PD, BW & SBD */
#define rOFDM0_RxDetector2 0xc34 /* SBD */
#define rOFDM0_RxDetector3 0xc38 /* Frame Sync */
/* PD, SBD, Frame Sync & Short-GI */
#define rOFDM0_RxDetector4 0xc3c
#define rOFDM0_RxDSP 0xc40
#define rOFDM0_CFOandDAGC 0xc44
#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */
#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */
#define rOFDM0_CCADropThreshold 0xc48
#define rOFDM0_ECCAThreshold 0xc4c
#define rOFDM0_ECCAThreshold 0xc4c /* Energy CCA */
#define rOFDM0_XAAGCCore1 0xc50
#define rOFDM0_XAAGCCore2 0xc54
#define rOFDM0_XBAGCCore1 0xc58
@ -184,9 +189,9 @@
#define rOFDM1_PseudoNoiseStateAB 0xd50
#define rOFDM1_PseudoNoiseStateCD 0xd54
#define rOFDM1_RxPseudoNoiseWgt 0xd58
#define rOFDM_PHYCounter1 0xda0
#define rOFDM_PHYCounter2 0xda4
#define rOFDM_PHYCounter3 0xda8
#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */
#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */
#define rOFDM_PHYCounter3 0xda8 /* MCS not supported */
#define rOFDM_ShortCFOAB 0xdac
#define rOFDM_ShortCFOCD 0xdb0
#define rOFDM_LongCFOAB 0xdb4
@ -221,14 +226,17 @@
#define rZebra1_RxLPF 0xb
#define rZebra1_RxHPFCorner 0xc
/* Zebra 4 */
#define rGlobalCtrl 0
#define rRTL8256_TxLPF 19
#define rRTL8256_RxLPF 11
/* RTL8258 */
#define rRTL8258_TxLPF 0x11
#define rRTL8258_RxLPF 0x13
#define rRTL8258_RSSILPF 0xa
/* Bit Mask - Page 1*/
#define bBBResetB 0x100
#define bGlobalResetB 0x200
#define bOFDMTxStart 0x4
@ -273,7 +281,7 @@
#define bCCKTxCRC16 0xffff
#define bCCKTxStatus 0x1
#define bOFDMTxStatus 0x2
/* Bit Mask - Page 8 */
#define bRFMOD 0x1
#define bJapanMode 0x2
#define bCCKTxSC 0x30
@ -290,13 +298,16 @@
#define bRFStart 0x0000f000
#define bBBStart 0x000000f0
#define bBBCCKStart 0x0000000f
/* Bit Mask - rFPGA0_RFTiming2 */
#define bPAEnd 0xf
#define bTREnd 0x0f000000
#define bRFEnd 0x000f0000
/* T2R */
#define bCCAMask 0x000000f0
#define bR2RCCAMask 0x00000f00
#define bHSSI_R2TDelay 0xf8000000
#define bHSSI_T2RDelay 0xf80000
/* Channel gain at continue TX. */
#define bContTxHSSI 0x400
#define bIGFromCCK 0x200
#define bAGCAddress 0x3f
@ -308,6 +319,7 @@
#define b3WireDataLength 0x800
#define b3WireAddressLength 0x400
#define b3WireRFPowerDown 0x1
/*#define bHWSISelect 0x8 */
#define b5GPAPEPolarity 0x40000000
#define b2GPAPEPolarity 0x80000000
#define bRFSW_TxDefaultAnt 0x3
@ -318,6 +330,7 @@
#define bRFSI_3WireClock 0x2
#define bRFSI_3WireLoad 0x4
#define bRFSI_3WireRW 0x8
/* 3-wire total control */
#define bRFSI_3Wire 0xf
#define bRFSI_RFENV 0x10
#define bRFSI_TRSW 0x20
@ -343,11 +356,11 @@
#define bLSIG_Length 0x1fffe
#define bLSIG_Parity 0x20
#define bCCKRxPhase 0x4
#define bLSSIReadAddress 0x3f000000
#define bLSSIReadEdge 0x80000000
#define bLSSIReadAddress 0x3f000000 /* LSSI "read" address */
#define bLSSIReadEdge 0x80000000 /* LSSI "read" edge signal */
#define bLSSIReadBackData 0xfff
#define bLSSIReadOKFlag 0x1000
#define bCCKSampleRate 0x8
#define bCCKSampleRate 0x8 /* 0: 44 MHz, 1: 88MHz */
#define bRegulator0Standby 0x1
#define bRegulatorPLLStandby 0x2
@ -404,10 +417,13 @@
#define bPSDSineToneScale 0x7f000000
#define bPSDReport 0xffff
/* Page 8 */
#define bOFDMTxSC 0x30000000
#define bCCKTxOn 0x1
#define bOFDMTxOn 0x2
/* Reset debug page and also HWord, LWord */
#define bDebugPage 0xfff
/* Reset debug page and LWord */
#define bDebugItem 0xff
#define bAntL 0x10
#define bAntNonHT 0x100
@ -416,6 +432,7 @@
#define bAntHT1S1 0x100000
#define bAntNonHTS1 0x1000000
/* Page a */
#define bCCKBBMode 0x3
#define bCCKTxPowerSaving 0x80
#define bCCKRxPowerSaving 0x40
@ -436,7 +453,7 @@
#define bCCKBistMode 0x80000000
#define bCCKCCAMask 0x40000000
#define bCCKTxDACPhase 0x4
#define bCCKRxADCPhase 0x20000000
#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */
#define bCCKr_cp_mode0 0x0100
#define bCCKTxDCOffset 0xf0
#define bCCKRxDCOffset 0xf
@ -450,11 +467,14 @@
#define bCCKRxIG 0x7f00
#define bCCKLNAPolarity 0x800000
#define bCCKRx1stGain 0x7f0000
/* CCK Rx Initial gain polarity */
#define bCCKRFExtend 0x20000000
#define bCCKRxAGCSatLevel 0x1f000000
#define bCCKRxAGCSatCount 0xe0
/* AGCSAmp_dly */
#define bCCKRxRFSettle 0x1f
#define bCCKFixedRxAGC 0x8000
/*#define bCCKRxAGCFormat 0x4000 remove to HSSI register 0x824 */
#define bCCKAntennaPolarity 0x2000
#define bCCKTxFilterType 0x0c00
#define bCCKRxAGCReportType 0x0300
@ -495,6 +515,7 @@
#define bCCKDefaultRxPath 0xc000000
#define bCCKOptionRxPath 0x3000000
/* Page c */
#define bNumOfSTF 0x3
#define bShift_L 0xc0
#define bGI_TH 0xc
@ -596,7 +617,9 @@
#define bRxHP_BBP1 0x7000
#define bRxHP_BBP2 0x70000
#define bRxHP_BBP3 0x700000
/* The threshold for high power */
#define bRSSI_H 0x7f0000
/* The threshold for ant diversity */
#define bRSSI_Gen 0x7f000000
#define bRxSettle_TRSW 0x7
#define bRxSettle_LNA 0x38
@ -631,6 +654,7 @@
#define bRxPD_Delay_TH1 0x38
#define bRxPD_Delay_TH2 0x1c0
#define bRxPD_DC_COUNT_MAX 0x600
/*#define bRxMF_Hold 0x3800*/
#define bRxPD_Delay_TH 0x8000
#define bRxProcess_Delay 0xf0000
#define bRxSearchrange_GI2_Early 0x700000
@ -656,6 +680,7 @@
#define bExtLNAGain 0x7c00
/* Page d */
#define bSTBCEn 0x4
#define bAntennaMapping 0x10
#define bNss 0x20
@ -665,6 +690,13 @@
#define bOFDMContinueTx 0x10000000
#define bOFDMSingleCarrier 0x20000000
#define bOFDMSingleTone 0x40000000
/* #define bRxPath1 0x01
* #define bRxPath2 0x02
* #define bRxPath3 0x04
* #define bRxPath4 0x08
* #define bTxPath1 0x10
* #define bTxPath2 0x20
*/
#define bHTDetect 0x100
#define bCFOEn 0x10000
#define bCFOValue 0xfff00000
@ -677,8 +709,8 @@
#define bCounter_MCSNoSupport 0xffff
#define bCounter_FastSync 0xffff
#define bShortCFO 0xfff
#define bShortCFOTLength 12
#define bShortCFOFLength 11
#define bShortCFOTLength 12 /* total */
#define bShortCFOFLength 11 /* fraction */
#define bLongCFO 0x7ff
#define bLongCFOTLength 11
#define bLongCFOFLength 11
@ -755,6 +787,7 @@
#define bUChCfg 0x7000000
#define bUpdEqz 0x8000000
/* Page e */
#define bTxAGCRate18_06 0x7f7f7f7f
#define bTxAGCRate54_24 0x7f7f7f7f
#define bTxAGCRateMCS32 0x7f
@ -764,8 +797,7 @@
#define bTxAGCRateMCS11_MCS8 0x7f7f7f7f
#define bTxAGCRateMCS15_MCS12 0x7f7f7f7f
#define bRxPesudoNoiseOn 0x20000000
#define bRxPesudoNoiseOn 0x20000000 /* Rx Pseduo noise */
#define bRxPesudoNoise_A 0xff
#define bRxPesudoNoise_B 0xff00
#define bRxPesudoNoise_C 0xff0000
@ -775,6 +807,7 @@
#define bPesudoNoiseState_C 0xffff
#define bPesudoNoiseState_D 0xffff0000
/* RF Zebra 1 */
#define bZebra1_HSSIEnable 0x8
#define bZebra1_TRxControl 0xc00
#define bZebra1_TRxGainSetting 0x07f
@ -785,15 +818,18 @@
#define bZebra1_TxLPFBW 0x400
#define bZebra1_RxLPFBW 0x600
/* Zebra4 */
#define bRTL8256RegModeCtrl1 0x100
#define bRTL8256RegModeCtrl0 0x40
#define bRTL8256_TxLPFBW 0x18
#define bRTL8256_RxLPFBW 0x600
/* RTL8258 */
#define bRTL8258_TxLPFBW 0xc
#define bRTL8258_RxLPFBW 0xc00
#define bRTL8258_RSSILPFBW 0xc0
/* byte enable for sb_write */
#define bByte0 0x1
#define bByte1 0x2
#define bByte2 0x4
@ -802,6 +838,7 @@
#define bWord1 0xc
#define bDWord 0xf
/* for PutRegsetting & GetRegSetting BitMask */
#define bMaskByte0 0xff
#define bMaskByte1 0xff00
#define bMaskByte2 0xff0000
@ -810,6 +847,7 @@
#define bMaskLWord 0x0000ffff
#define bMaskDWord 0xffffffff
/* for PutRFRegsetting & GetRFRegSetting BitMask */
#define bMask12Bits 0xfff
#define bEnable 0x1
@ -818,14 +856,14 @@
#define LeftAntenna 0x0
#define RightAntenna 0x1
#define tCheckTxStatus 500
#define tUpdateRxCounter 100
#define tCheckTxStatus 500 /* 500 ms */
#define tUpdateRxCounter 100 /* 100 ms */
#define rateCCK 0
#define rateOFDM 1
#define rateHT 2
#define bPMAC_End 0x1ff
#define bPMAC_End 0x1ff /* define Register-End */
#define bFPGAPHY0_End 0x8ff
#define bFPGAPHY1_End 0x9ff
#define bCCKPHY0_End 0xaff