USB: re-remove <linux/usb_sl811.h>

Remove <linux/usb_sl811.h> ... somehow this was recreated when
the Blackfin arch was merged, instead of using <linux/usb/sl811.h>
which is the correct header.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
David Brownell 2007-10-04 18:06:16 -07:00 committed by Greg Kroah-Hartman
parent 9454a57ab5
commit 27f5d75afa
4 changed files with 3 additions and 29 deletions

View File

@ -40,7 +40,7 @@
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb_sl811.h>
#include <linux/usb/sl811.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>

View File

@ -40,7 +40,7 @@
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <linux/usb_sl811.h>
#include <linux/usb/sl811.h>
#include <linux/spi/ad7877.h>

View File

@ -40,7 +40,7 @@
#include <linux/pata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb_sl811.h>
#include <linux/usb/sl811.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>

View File

@ -1,26 +0,0 @@
/*
* board initialization should put one of these into dev->platform_data
* and place the sl811hs onto platform_bus named "sl811-hcd".
*/
struct sl811_platform_data {
unsigned can_wakeup:1;
/* given port_power, msec/2 after power on till power good */
u8 potpg;
/* mA/2 power supplied on this port (max = default = 250) */
u8 power;
/* sl811 relies on an external source of VBUS current */
void (*port_power)(struct device *dev, int is_on);
/* pulse sl811 nRST (probably with a GPIO) */
void (*reset)(struct device *dev);
// some boards need something like these:
// int (*check_overcurrent)(struct device *dev);
// void (*clock_enable)(struct device *dev, int is_on);
};