pktgen: add sample script pktgen_sample02_multiqueue.sh

Add the pktgen samples script pktgen_sample02_multiqueue.sh that
demonstrates generating packets on multiqueue NICs.

Specifically notice the options "-t" that specifies how many
kernel threads to activate.  Also notice the flag QUEUE_MAP_CPU,
which cause the SKB TX queue to be mapped to the CPU running the
kernel thread.  For best scalability people are also encourage to
map NIC IRQ /proc/irq/*/smp_affinity to CPU number.

Usage example with "-t" 4 threads and help:
 ./pktgen_sample02_multiqueue.sh -i eth4 -m 00:1B:21:3C:9D:F8 -t 4

Usage: ./pktgen_sample02_multiqueue.sh [-vx] -i ethX
  -i : ($DEV)       output interface/device (required)
  -s : ($PKT_SIZE)  packet size
  -d : ($DEST_IP)   destination IP
  -m : ($DST_MAC)   destination MAC-addr
  -t : ($THREADS)   threads to start
  -c : ($SKB_CLONE) SKB clones send before alloc new SKB
  -b : ($BURST)     HW level bursting of SKBs
  -v : ($VERBOSE)   verbose
  -x : ($DEBUG)     debug

Removing pktgen.conf-2-1 and pktgen.conf-2-2 as these examples
should be covered now.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jesper Dangaard Brouer 2015-05-21 12:17:48 +02:00 committed by David S. Miller
parent 6f09479758
commit 282fb58947
4 changed files with 75 additions and 141 deletions

View File

@ -244,8 +244,6 @@ pktgen_sampleXX scripts and modify them to fit your own needs.
The old scripts: The old scripts:
pktgen.conf-1-2 # 1 CPU 2 dev pktgen.conf-1-2 # 1 CPU 2 dev
pktgen.conf-2-1 # 2 CPU's 1 dev
pktgen.conf-2-2 # 2 CPU's 2 dev
pktgen.conf-1-1-rdos # 1 CPU 1 dev w. route DoS pktgen.conf-1-1-rdos # 1 CPU 1 dev w. route DoS
pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6 pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6
pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS

View File

@ -1,66 +0,0 @@
#!/bin/bash
#modprobe pktgen
function pgset() {
local result
echo $1 > $PGDEV
result=`cat $PGDEV | fgrep "Result: OK:"`
if [ "$result" = "" ]; then
cat $PGDEV | fgrep Result:
fi
}
# Config Start Here -----------------------------------------------------------
# thread config
# Each CPU has its own thread. Two CPU example. We add eth1 to the first
# and leave the second idle.
PGDEV=/proc/net/pktgen/kpktgend_0
echo "Removing all devices"
pgset "rem_device_all"
echo "Adding eth1"
pgset "add_device eth1"
# We need to remove old config since we dont use this thread. We can only
# one NIC on one CPU due to affinity reasons.
PGDEV=/proc/net/pktgen/kpktgend_1
echo "Removing all devices"
pgset "rem_device_all"
# device config
# delay 0 means maximum speed.
CLONE_SKB="clone_skb 1000000"
# NIC adds 4 bytes CRC
PKT_SIZE="pkt_size 60"
# COUNT 0 means forever
#COUNT="count 0"
COUNT="count 10000000"
DELAY="delay 0"
PGDEV=/proc/net/pktgen/eth1
echo "Configuring $PGDEV"
pgset "$COUNT"
pgset "$CLONE_SKB"
pgset "$PKT_SIZE"
pgset "$DELAY"
pgset "dst 10.10.11.2"
pgset "dst_mac 00:04:23:08:91:dc"
# Time to run
PGDEV=/proc/net/pktgen/pgctrl
echo "Running... ctrl^C to stop"
trap true INT
pgset "start"
echo "Done"
cat /proc/net/pktgen/eth1

View File

@ -1,73 +0,0 @@
#!/bin/bash
#modprobe pktgen
function pgset() {
local result
echo $1 > $PGDEV
result=`cat $PGDEV | fgrep "Result: OK:"`
if [ "$result" = "" ]; then
cat $PGDEV | fgrep Result:
fi
}
# Config Start Here -----------------------------------------------------------
# thread config
# Each CPU has its own thread. Two CPU example. We add eth1, eth2 respectively.
PGDEV=/proc/net/pktgen/kpktgend_0
echo "Removing all devices"
pgset "rem_device_all"
echo "Adding eth1"
pgset "add_device eth1"
PGDEV=/proc/net/pktgen/kpktgend_1
echo "Removing all devices"
pgset "rem_device_all"
echo "Adding eth2"
pgset "add_device eth2"
# device config
# delay 0 means maximum speed.
CLONE_SKB="clone_skb 1000000"
# NIC adds 4 bytes CRC
PKT_SIZE="pkt_size 60"
# COUNT 0 means forever
#COUNT="count 0"
COUNT="count 10000000"
DELAY="delay 0"
PGDEV=/proc/net/pktgen/eth1
echo "Configuring $PGDEV"
pgset "$COUNT"
pgset "$CLONE_SKB"
pgset "$PKT_SIZE"
pgset "$DELAY"
pgset "dst 10.10.11.2"
pgset "dst_mac 00:04:23:08:91:dc"
PGDEV=/proc/net/pktgen/eth2
echo "Configuring $PGDEV"
pgset "$COUNT"
pgset "$CLONE_SKB"
pgset "$PKT_SIZE"
pgset "$DELAY"
pgset "dst 192.168.2.2"
pgset "dst_mac 00:04:23:08:91:de"
# Time to run
PGDEV=/proc/net/pktgen/pgctrl
echo "Running... ctrl^C to stop"
trap true INT
pgset "start"
echo "Done"
cat /proc/net/pktgen/eth1 /proc/net/pktgen/eth2

View File

@ -0,0 +1,75 @@
#!/bin/bash
#
# Multiqueue: Using pktgen threads for sending on multiple CPUs
# * adding devices to kernel threads
# * notice the naming scheme for keeping device names unique
# * nameing scheme: dev@thread_number
# * flow variation via random UDP source port
#
basedir=`dirname $0`
source ${basedir}/functions.sh
root_check_run_with_sudo "$@"
#
# Required param: -i dev in $DEV
source ${basedir}/parameters.sh
# Base Config
DELAY="0" # Zero means max speed
COUNT="100000" # Zero means indefinitely
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
# Flow variation random source port between min and max
UDP_MIN=9
UDP_MAX=109
# (example of setting default params in your script)
[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
# General cleanup everything since last run
pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((thread = 0; thread < $THREADS; thread++)); do
# The device name is extended with @name, using thread number to
# make then unique, but any name will do.
dev=${DEV}@${thread}
# Add remove all other devices and add_device $dev to thread
pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# Notice config queue to map to cpu (mirrors smp_processor_id())
# It is beneficial to map IRQ /proc/irq/*/smp_affinity 1:1 to CPU number
pg_set $dev "flag QUEUE_MAP_CPU"
# Base config of dev
pg_set $dev "count $COUNT"
pg_set $dev "clone_skb $CLONE_SKB"
pg_set $dev "pkt_size $PKT_SIZE"
pg_set $dev "delay $DELAY"
# Flag example disabling timestamping
pg_set $dev "flag NO_TIMESTAMP"
# Destination
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst $DEST_IP"
# Setup random UDP port src range
pg_set $dev "flag UDPSRC_RND"
pg_set $dev "udp_src_min $UDP_MIN"
pg_set $dev "udp_src_max $UDP_MAX"
done
# start_run
echo "Running... ctrl^C to stop" >&2
pg_ctrl "start"
echo "Done" >&2
# Print results
for ((thread = 0; thread < $THREADS; thread++)); do
dev=${DEV}@${thread}
echo "Device: $dev"
cat /proc/net/pktgen/$dev | grep -A2 "Result:"
done