diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index 56c54558c8a4..8d55a83d6921 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -23,9 +23,10 @@ Contact: linux-input@vger.kernel.org Description: Attribute group for control of the status LEDs and the OLEDs. This attribute group is only available for Intuos 4 M, L, - and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD - (LEDs only). Therefore its presence implicitly signifies the - presence of said LEDs and OLEDs on the tablet device. + and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq + 21UX2 and Cintiq 24HD (LEDs only). Therefore its presence + implicitly signifies the presence of said LEDs and OLEDs on the + tablet device. What: /sys/bus/usb/devices/-:./wacom_led/status0_luminance Date: August 2011 @@ -48,10 +49,10 @@ What: /sys/bus/usb/devices/-:./wacom_led/status_led0 Date: August 2011 Contact: linux-input@vger.kernel.org Description: - Writing to this file sets which one of the four (for Intuos 4) - or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status - LEDs is active (0..3). The other three LEDs on the same side are - always inactive. + Writing to this file sets which one of the four (for Intuos 4 + and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq + 24HD) status LEDs is active (0..3). The other three LEDs on the + same side are always inactive. What: /sys/bus/usb/devices/-:./wacom_led/status_led1_select Date: September 2011 diff --git a/Documentation/devicetree/bindings/input/spear-keyboard.txt b/Documentation/devicetree/bindings/input/spear-keyboard.txt new file mode 100644 index 000000000000..4a846d26da23 --- /dev/null +++ b/Documentation/devicetree/bindings/input/spear-keyboard.txt @@ -0,0 +1,20 @@ +* SPEAr keyboard controller + +Required properties: +- compatible: "st,spear300-kbd" + +Optional properties, in addition to those specified by the shared +matrix-keyboard bindings: +- autorepeat: bool: enables key autorepeat +- st,mode: keyboard mode: 0 - 9x9, 1 - 6x6, 2 - 2x2 + +Example: + +kbd@fc400000 { + compatible = "st,spear300-kbd"; + reg = <0xfc400000 0x100>; + linux,keymap = < 0x00030012 + 0x0102003a >; + autorepeat; + st,mode = <0>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt new file mode 100644 index 000000000000..41cbf4b7a670 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt @@ -0,0 +1,16 @@ +* NXP LPC32xx SoC Touchscreen Controller (TSC) + +Required properties: +- compatible: must be "nxp,lpc3220-tsc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The TSC/ADC interrupt + +Example: + + tsc@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + }; diff --git a/Documentation/devicetree/bindings/input/twl6040-vibra.txt b/Documentation/devicetree/bindings/input/twl6040-vibra.txt new file mode 100644 index 000000000000..5b1918b818fb --- /dev/null +++ b/Documentation/devicetree/bindings/input/twl6040-vibra.txt @@ -0,0 +1,37 @@ +Vibra driver for the twl6040 family + +The vibra driver is a child of the twl6040 MFD dirver. +Documentation/devicetree/bindings/mfd/twl6040.txt + +Required properties: +- compatible : Must be "ti,twl6040-vibra"; +- interrupts: 4, Vibra overcurrent interrupt +- vddvibl-supply: Regulator supplying the left vibra motor +- vddvibr-supply: Regulator supplying the right vibra motor +- vibldrv_res: Board specific left driver resistance +- vibrdrv_res: Board specific right driver resistance +- viblmotor_res: Board specific left motor resistance +- vibrmotor_res: Board specific right motor resistance + +Optional properties: +- vddvibl_uV: If the vddvibl default voltage need to be changed +- vddvibr_uV: If the vddvibr default voltage need to be changed + +Example: +/* + * 8-channel high quality low-power audio codec + * http://www.ti.com/lit/ds/symlink/twl6040.pdf + */ +twl6040: twl6040@4b { + ... + twl6040_vibra: twl6040@1 { + compatible = "ti,twl6040-vibra"; + interrupts = <4>; + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + vibldrv_res = <8>; + vibrdrv_res = <3>; + viblmotor_res = <10>; + vibrmotor_res = <10>; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 54c984e9d058..62b0cf496ebd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3465,6 +3465,8 @@ Q: http://patchwork.kernel.org/project/linux-input/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git S: Maintained F: drivers/input/ +F: include/linux/input.h +F: include/linux/input/ INPUT MULTITOUCH (MT) PROTOCOL M: Henrik Rydberg diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 332597980817..55f7e57d4e42 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -25,10 +25,6 @@ config INPUT if INPUT -config INPUT_OF_MATRIX_KEYMAP - depends on USE_OF - bool - config INPUT_FF_MEMLESS tristate "Support for memoryless force-feedback devices" help @@ -68,6 +64,19 @@ config INPUT_SPARSEKMAP To compile this driver as a module, choose M here: the module will be called sparse-keymap. +config INPUT_MATRIXKMAP + tristate "Matrix keymap support library" + help + Say Y here if you are using a driver for an input + device that uses matrix keymap. This option is only + useful for out-of-tree drivers since in-tree drivers + select it automatically. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called matrix-keymap. + comment "Userland interfaces" config INPUT_MOUSEDEV diff --git a/drivers/input/Makefile b/drivers/input/Makefile index b173a13a73ca..5ca3f631497f 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -10,6 +10,7 @@ input-core-y := input.o input-compat.o input-mt.o ff-core.o obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o obj-$(CONFIG_INPUT_SPARSEKMAP) += sparse-keymap.o +obj-$(CONFIG_INPUT_MATRIXKMAP) += matrix-keymap.o obj-$(CONFIG_INPUT_MOUSEDEV) += mousedev.o obj-$(CONFIG_INPUT_JOYDEV) += joydev.o @@ -24,4 +25,3 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/ obj-$(CONFIG_INPUT_MISC) += misc/ obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o -obj-$(CONFIG_INPUT_OF_MATRIX_KEYMAP) += of_keymap.o diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 4b2e10d5d641..6c58bfff01a3 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -180,7 +180,10 @@ static int evdev_grab(struct evdev *evdev, struct evdev_client *client) static int evdev_ungrab(struct evdev *evdev, struct evdev_client *client) { - if (evdev->grab != client) + struct evdev_client *grab = rcu_dereference_protected(evdev->grab, + lockdep_is_held(&evdev->mutex)); + + if (grab != client) return -EINVAL; rcu_assign_pointer(evdev->grab, NULL); @@ -259,8 +262,7 @@ static int evdev_release(struct inode *inode, struct file *file) struct evdev *evdev = client->evdev; mutex_lock(&evdev->mutex); - if (evdev->grab == client) - evdev_ungrab(evdev, client); + evdev_ungrab(evdev, client); mutex_unlock(&evdev->mutex); evdev_detach_client(evdev, client); @@ -343,7 +345,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer, struct input_event event; int retval = 0; - if (count < input_event_size()) + if (count != 0 && count < input_event_size()) return -EINVAL; retval = mutex_lock_interruptible(&evdev->mutex); @@ -355,7 +357,8 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer, goto out; } - do { + while (retval + input_event_size() <= count) { + if (input_event_from_user(buffer + retval, &event)) { retval = -EFAULT; goto out; @@ -364,7 +367,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer, input_inject_event(&evdev->handle, event.type, event.code, event.value); - } while (retval + input_event_size() <= count); + } out: mutex_unlock(&evdev->mutex); @@ -395,35 +398,49 @@ static ssize_t evdev_read(struct file *file, char __user *buffer, struct evdev_client *client = file->private_data; struct evdev *evdev = client->evdev; struct input_event event; - int retval = 0; + size_t read = 0; + int error; - if (count < input_event_size()) + if (count != 0 && count < input_event_size()) return -EINVAL; - if (!(file->f_flags & O_NONBLOCK)) { - retval = wait_event_interruptible(evdev->wait, - client->packet_head != client->tail || - !evdev->exist); - if (retval) - return retval; + for (;;) { + if (!evdev->exist) + return -ENODEV; + + if (client->packet_head == client->tail && + (file->f_flags & O_NONBLOCK)) + return -EAGAIN; + + /* + * count == 0 is special - no IO is done but we check + * for error conditions (see above). + */ + if (count == 0) + break; + + while (read + input_event_size() <= count && + evdev_fetch_next_event(client, &event)) { + + if (input_event_to_user(buffer + read, &event)) + return -EFAULT; + + read += input_event_size(); + } + + if (read) + break; + + if (!(file->f_flags & O_NONBLOCK)) { + error = wait_event_interruptible(evdev->wait, + client->packet_head != client->tail || + !evdev->exist); + if (error) + return error; + } } - if (!evdev->exist) - return -ENODEV; - - while (retval + input_event_size() <= count && - evdev_fetch_next_event(client, &event)) { - - if (input_event_to_user(buffer + retval, &event)) - return -EFAULT; - - retval += input_event_size(); - } - - if (retval == 0 && (file->f_flags & O_NONBLOCK)) - return -EAGAIN; - - return retval; + return read; } /* No kernel lock - fine */ diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c index 422aa0a6b77f..daceafe7ee7d 100644 --- a/drivers/input/gameport/emu10k1-gp.c +++ b/drivers/input/gameport/emu10k1-gp.c @@ -125,15 +125,4 @@ static struct pci_driver emu_driver = { .remove = __devexit_p(emu_remove), }; -static int __init emu_init(void) -{ - return pci_register_driver(&emu_driver); -} - -static void __exit emu_exit(void) -{ - pci_unregister_driver(&emu_driver); -} - -module_init(emu_init); -module_exit(emu_exit); +module_pci_driver(emu_driver); diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c index a3b70ff21018..48ad3829ff20 100644 --- a/drivers/input/gameport/fm801-gp.c +++ b/drivers/input/gameport/fm801-gp.c @@ -144,6 +144,7 @@ static const struct pci_device_id fm801_gp_id_table[] = { { PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0 } }; +MODULE_DEVICE_TABLE(pci, fm801_gp_id_table); static struct pci_driver fm801_gp_driver = { .name = "FM801_gameport", @@ -152,20 +153,7 @@ static struct pci_driver fm801_gp_driver = { .remove = __devexit_p(fm801_gp_remove), }; -static int __init fm801_gp_init(void) -{ - return pci_register_driver(&fm801_gp_driver); -} - -static void __exit fm801_gp_exit(void) -{ - pci_unregister_driver(&fm801_gp_driver); -} - -module_init(fm801_gp_init); -module_exit(fm801_gp_exit); - -MODULE_DEVICE_TABLE(pci, fm801_gp_id_table); +module_pci_driver(fm801_gp_driver); MODULE_DESCRIPTION("FM801 gameport driver"); MODULE_AUTHOR("Takashi Iwai "); diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c index 1639ab2b94b7..85bc8dc07cfc 100644 --- a/drivers/input/joystick/a3d.c +++ b/drivers/input/joystick/a3d.c @@ -413,15 +413,4 @@ static struct gameport_driver a3d_drv = { .disconnect = a3d_disconnect, }; -static int __init a3d_init(void) -{ - return gameport_register_driver(&a3d_drv); -} - -static void __exit a3d_exit(void) -{ - gameport_unregister_driver(&a3d_drv); -} - -module_init(a3d_init); -module_exit(a3d_exit); +module_gameport_driver(a3d_drv); diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c index b992fbf91f2f..0cbfd2dfabf4 100644 --- a/drivers/input/joystick/adi.c +++ b/drivers/input/joystick/adi.c @@ -557,10 +557,6 @@ static void adi_disconnect(struct gameport *gameport) kfree(port); } -/* - * The gameport device structure. - */ - static struct gameport_driver adi_drv = { .driver = { .name = "adi", @@ -570,15 +566,4 @@ static struct gameport_driver adi_drv = { .disconnect = adi_disconnect, }; -static int __init adi_init(void) -{ - return gameport_register_driver(&adi_drv); -} - -static void __exit adi_exit(void) -{ - gameport_unregister_driver(&adi_drv); -} - -module_init(adi_init); -module_exit(adi_exit); +module_gameport_driver(adi_drv); diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c index 3497b87c3d05..65367e44d715 100644 --- a/drivers/input/joystick/cobra.c +++ b/drivers/input/joystick/cobra.c @@ -261,15 +261,4 @@ static struct gameport_driver cobra_drv = { .disconnect = cobra_disconnect, }; -static int __init cobra_init(void) -{ - return gameport_register_driver(&cobra_drv); -} - -static void __exit cobra_exit(void) -{ - gameport_unregister_driver(&cobra_drv); -} - -module_init(cobra_init); -module_exit(cobra_exit); +module_gameport_driver(cobra_drv); diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c index 0536b1b2f018..ab1cf2882004 100644 --- a/drivers/input/joystick/gf2k.c +++ b/drivers/input/joystick/gf2k.c @@ -373,15 +373,4 @@ static struct gameport_driver gf2k_drv = { .disconnect = gf2k_disconnect, }; -static int __init gf2k_init(void) -{ - return gameport_register_driver(&gf2k_drv); -} - -static void __exit gf2k_exit(void) -{ - gameport_unregister_driver(&gf2k_drv); -} - -module_init(gf2k_init); -module_exit(gf2k_exit); +module_gameport_driver(gf2k_drv); diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c index fc55899ba6c5..9e1beff57c33 100644 --- a/drivers/input/joystick/grip.c +++ b/drivers/input/joystick/grip.c @@ -424,15 +424,4 @@ static struct gameport_driver grip_drv = { .disconnect = grip_disconnect, }; -static int __init grip_init(void) -{ - return gameport_register_driver(&grip_drv); -} - -static void __exit grip_exit(void) -{ - gameport_unregister_driver(&grip_drv); -} - -module_init(grip_init); -module_exit(grip_exit); +module_gameport_driver(grip_drv); diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c index 2d47baf47769..c0f9c7b7eb4e 100644 --- a/drivers/input/joystick/grip_mp.c +++ b/drivers/input/joystick/grip_mp.c @@ -687,15 +687,4 @@ static struct gameport_driver grip_drv = { .disconnect = grip_disconnect, }; -static int __init grip_init(void) -{ - return gameport_register_driver(&grip_drv); -} - -static void __exit grip_exit(void) -{ - gameport_unregister_driver(&grip_drv); -} - -module_init(grip_init); -module_exit(grip_exit); +module_gameport_driver(grip_drv); diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c index 4058d4b272fe..55196f730af6 100644 --- a/drivers/input/joystick/guillemot.c +++ b/drivers/input/joystick/guillemot.c @@ -281,15 +281,4 @@ static struct gameport_driver guillemot_drv = { .disconnect = guillemot_disconnect, }; -static int __init guillemot_init(void) -{ - return gameport_register_driver(&guillemot_drv); -} - -static void __exit guillemot_exit(void) -{ - gameport_unregister_driver(&guillemot_drv); -} - -module_init(guillemot_init); -module_exit(guillemot_exit); +module_gameport_driver(guillemot_drv); diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c index 16fb19d1ca25..88c22623a2e8 100644 --- a/drivers/input/joystick/interact.c +++ b/drivers/input/joystick/interact.c @@ -311,15 +311,4 @@ static struct gameport_driver interact_drv = { .disconnect = interact_disconnect, }; -static int __init interact_init(void) -{ - return gameport_register_driver(&interact_drv); -} - -static void __exit interact_exit(void) -{ - gameport_unregister_driver(&interact_drv); -} - -module_init(interact_init); -module_exit(interact_exit); +module_gameport_driver(interact_drv); diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c index cd894a0564a2..7eb878bab968 100644 --- a/drivers/input/joystick/joydump.c +++ b/drivers/input/joystick/joydump.c @@ -159,15 +159,4 @@ static struct gameport_driver joydump_drv = { .disconnect = joydump_disconnect, }; -static int __init joydump_init(void) -{ - return gameport_register_driver(&joydump_drv); -} - -static void __exit joydump_exit(void) -{ - gameport_unregister_driver(&joydump_drv); -} - -module_init(joydump_init); -module_exit(joydump_exit); +module_gameport_driver(joydump_drv); diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c index 40e40780747d..9fb153eef2fc 100644 --- a/drivers/input/joystick/magellan.c +++ b/drivers/input/joystick/magellan.c @@ -222,19 +222,4 @@ static struct serio_driver magellan_drv = { .disconnect = magellan_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init magellan_init(void) -{ - return serio_register_driver(&magellan_drv); -} - -static void __exit magellan_exit(void) -{ - serio_unregister_driver(&magellan_drv); -} - -module_init(magellan_init); -module_exit(magellan_exit); +module_serio_driver(magellan_drv); diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c index b8d86115644b..04c69af37148 100644 --- a/drivers/input/joystick/sidewinder.c +++ b/drivers/input/joystick/sidewinder.c @@ -820,15 +820,4 @@ static struct gameport_driver sw_drv = { .disconnect = sw_disconnect, }; -static int __init sw_init(void) -{ - return gameport_register_driver(&sw_drv); -} - -static void __exit sw_exit(void) -{ - gameport_unregister_driver(&sw_drv); -} - -module_init(sw_init); -module_exit(sw_exit); +module_gameport_driver(sw_drv); diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c index 0cd9b29356a8..80a7b27a457a 100644 --- a/drivers/input/joystick/spaceball.c +++ b/drivers/input/joystick/spaceball.c @@ -296,19 +296,4 @@ static struct serio_driver spaceball_drv = { .disconnect = spaceball_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init spaceball_init(void) -{ - return serio_register_driver(&spaceball_drv); -} - -static void __exit spaceball_exit(void) -{ - serio_unregister_driver(&spaceball_drv); -} - -module_init(spaceball_init); -module_exit(spaceball_exit); +module_serio_driver(spaceball_drv); diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c index a694bf8e557b..a41f291652e6 100644 --- a/drivers/input/joystick/spaceorb.c +++ b/drivers/input/joystick/spaceorb.c @@ -237,19 +237,4 @@ static struct serio_driver spaceorb_drv = { .disconnect = spaceorb_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init spaceorb_init(void) -{ - return serio_register_driver(&spaceorb_drv); -} - -static void __exit spaceorb_exit(void) -{ - serio_unregister_driver(&spaceorb_drv); -} - -module_init(spaceorb_init); -module_exit(spaceorb_exit); +module_serio_driver(spaceorb_drv); diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c index e0db9f5e4b41..0f51a60e14a7 100644 --- a/drivers/input/joystick/stinger.c +++ b/drivers/input/joystick/stinger.c @@ -208,19 +208,4 @@ static struct serio_driver stinger_drv = { .disconnect = stinger_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init stinger_init(void) -{ - return serio_register_driver(&stinger_drv); -} - -static void __exit stinger_exit(void) -{ - serio_unregister_driver(&stinger_drv); -} - -module_init(stinger_init); -module_exit(stinger_exit); +module_serio_driver(stinger_drv); diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c index d6c609807115..5ef9bcdb0345 100644 --- a/drivers/input/joystick/tmdc.c +++ b/drivers/input/joystick/tmdc.c @@ -436,15 +436,4 @@ static struct gameport_driver tmdc_drv = { .disconnect = tmdc_disconnect, }; -static int __init tmdc_init(void) -{ - return gameport_register_driver(&tmdc_drv); -} - -static void __exit tmdc_exit(void) -{ - gameport_unregister_driver(&tmdc_drv); -} - -module_init(tmdc_init); -module_exit(tmdc_exit); +module_gameport_driver(tmdc_drv); diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c index 3f4ec73c9553..2556a8193579 100644 --- a/drivers/input/joystick/twidjoy.c +++ b/drivers/input/joystick/twidjoy.c @@ -257,19 +257,4 @@ static struct serio_driver twidjoy_drv = { .disconnect = twidjoy_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init twidjoy_init(void) -{ - return serio_register_driver(&twidjoy_drv); -} - -static void __exit twidjoy_exit(void) -{ - serio_unregister_driver(&twidjoy_drv); -} - -module_init(twidjoy_init); -module_exit(twidjoy_exit); +module_serio_driver(twidjoy_drv); diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c index f72c83e15e60..23b3071abb6e 100644 --- a/drivers/input/joystick/warrior.c +++ b/drivers/input/joystick/warrior.c @@ -217,19 +217,4 @@ static struct serio_driver warrior_drv = { .disconnect = warrior_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init warrior_init(void) -{ - return serio_register_driver(&warrior_drv); -} - -static void __exit warrior_exit(void) -{ - serio_unregister_driver(&warrior_drv); -} - -module_init(warrior_init); -module_exit(warrior_exit); +module_serio_driver(warrior_drv); diff --git a/drivers/input/joystick/zhenhua.c b/drivers/input/joystick/zhenhua.c index b5853125c898..c4de4388fd7f 100644 --- a/drivers/input/joystick/zhenhua.c +++ b/drivers/input/joystick/zhenhua.c @@ -225,19 +225,4 @@ static struct serio_driver zhenhua_drv = { .disconnect = zhenhua_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init zhenhua_init(void) -{ - return serio_register_driver(&zhenhua_drv); -} - -static void __exit zhenhua_exit(void) -{ - serio_unregister_driver(&zhenhua_drv); -} - -module_init(zhenhua_init); -module_exit(zhenhua_exit); +module_serio_driver(zhenhua_drv); diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index f354813a13e8..c0e11ecc646f 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -166,6 +166,7 @@ config KEYBOARD_LKKBD config KEYBOARD_EP93XX tristate "EP93xx Matrix Keypad support" depends on ARCH_EP93XX + select INPUT_MATRIXKMAP help Say Y here to enable the matrix keypad on the Cirrus EP93XX. @@ -224,6 +225,7 @@ config KEYBOARD_TCA6416 config KEYBOARD_TCA8418 tristate "TCA8418 Keypad Support" depends on I2C + select INPUT_MATRIXKMAP help This driver implements basic keypad functionality for keys connected through TCA8418 keypad decoder. @@ -240,6 +242,7 @@ config KEYBOARD_TCA8418 config KEYBOARD_MATRIX tristate "GPIO driven matrix keypad support" depends on GENERIC_GPIO + select INPUT_MATRIXKMAP help Enable support for GPIO driven matrix keypad. @@ -309,6 +312,17 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. +config KEYBOARD_LM8333 + tristate "LM8333 keypad chip" + depends on I2C + select INPUT_MATRIXKMAP + help + If you say yes here you get support for the National Semiconductor + LM8333 keypad controller. + + To compile this driver as a module, choose M here: the + module will be called lm8333. + config KEYBOARD_LOCOMO tristate "LoCoMo Keyboard Support" depends on SHARP_LOCOMO @@ -366,6 +380,7 @@ config KEYBOARD_MPR121 config KEYBOARD_IMX tristate "IMX keypad support" depends on ARCH_MXC + select INPUT_MATRIXKMAP help Enable support for IMX keypad port. @@ -384,6 +399,7 @@ config KEYBOARD_NEWTON config KEYBOARD_NOMADIK tristate "ST-Ericsson Nomadik SKE keyboard" depends on PLAT_NOMADIK + select INPUT_MATRIXKMAP help Say Y here if you want to use a keypad provided on the SKE controller used on the Ux500 and Nomadik platforms @@ -394,7 +410,7 @@ config KEYBOARD_NOMADIK config KEYBOARD_TEGRA tristate "NVIDIA Tegra internal matrix keyboard controller support" depends on ARCH_TEGRA - select INPUT_OF_MATRIX_KEYMAP if USE_OF + select INPUT_MATRIXKMAP help Say Y here if you want to use a matrix keyboard connected directly to the internal keyboard controller on Tegra SoCs. @@ -432,6 +448,7 @@ config KEYBOARD_PXA930_ROTARY config KEYBOARD_PMIC8XXX tristate "Qualcomm PMIC8XXX keypad support" depends on MFD_PM8XXX + select INPUT_MATRIXKMAP help Say Y here if you want to enable the driver for the PMIC8XXX keypad provided as a reference design from Qualcomm. This is intended @@ -443,6 +460,7 @@ config KEYBOARD_PMIC8XXX config KEYBOARD_SAMSUNG tristate "Samsung keypad support" depends on HAVE_CLK + select INPUT_MATRIXKMAP help Say Y here if you want to use the keypad on your Samsung mobile device. @@ -485,6 +503,7 @@ config KEYBOARD_SH_KEYSC config KEYBOARD_STMPE tristate "STMPE keypad support" depends on MFD_STMPE + select INPUT_MATRIXKMAP help Say Y here if you want to use the keypad controller on STMPE I/O expanders. @@ -505,6 +524,7 @@ config KEYBOARD_DAVINCI config KEYBOARD_OMAP tristate "TI OMAP keypad support" depends on (ARCH_OMAP1 || ARCH_OMAP2) + select INPUT_MATRIXKMAP help Say Y here if you want to use the OMAP keypad. @@ -512,9 +532,10 @@ config KEYBOARD_OMAP module will be called omap-keypad. config KEYBOARD_OMAP4 - tristate "TI OMAP4 keypad support" + tristate "TI OMAP4+ keypad support" + select INPUT_MATRIXKMAP help - Say Y here if you want to use the OMAP4 keypad. + Say Y here if you want to use the OMAP4+ keypad. To compile this driver as a module, choose M here: the module will be called omap4-keypad. @@ -522,6 +543,7 @@ config KEYBOARD_OMAP4 config KEYBOARD_SPEAR tristate "ST SPEAR keyboard support" depends on PLAT_SPEAR + select INPUT_MATRIXKMAP help Say Y here if you want to use the SPEAR keyboard. @@ -531,6 +553,7 @@ config KEYBOARD_SPEAR config KEYBOARD_TC3589X tristate "TC3589X Keypad support" depends on MFD_TC3589X + select INPUT_MATRIXKMAP help Say Y here if you want to use the keypad controller on TC35892/3 I/O expander. @@ -541,6 +564,7 @@ config KEYBOARD_TC3589X config KEYBOARD_TNETV107X tristate "TI TNETV107X keypad support" depends on ARCH_DAVINCI_TNETV107X + select INPUT_MATRIXKMAP help Say Y here if you want to use the TNETV107X keypad. @@ -550,6 +574,7 @@ config KEYBOARD_TNETV107X config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE + select INPUT_MATRIXKMAP help Say Y here if your board use the keypad controller on TWL4030 family chips. It's safe to say enable this @@ -573,6 +598,7 @@ config KEYBOARD_XTKBD config KEYBOARD_W90P910 tristate "W90P910 Matrix Keypad support" depends on ARCH_W90X900 + select INPUT_MATRIXKMAP help Say Y here to enable the matrix keypad on evaluation board based on W90P910. diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index df7061f12918..b03b02456a82 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LM8333) += lm8333.o obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 39ebffac207e..b083bf10f139 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -197,6 +197,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad) kpad->gc.base = gpio_data->gpio_start; kpad->gc.label = kpad->client->name; kpad->gc.owner = THIS_MODULE; + kpad->gc.names = gpio_data->names; mutex_init(&kpad->gpio_lock); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index e05a2e7073c6..add5ffd9fe26 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -433,7 +433,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, if (printk_ratelimit()) dev_warn(&serio->dev, "Spurious %s on %s. " - "Some program might be trying access hardware directly.\n", + "Some program might be trying to access hardware directly.\n", data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); goto out; case ATKBD_RET_ERR: diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index 0ba69f3fcb52..c46fc8185469 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -182,16 +182,10 @@ static void ep93xx_keypad_close(struct input_dev *pdev) } -#ifdef CONFIG_PM -/* - * NOTE: I don't know if this is correct, or will work on the ep93xx. - * - * None of the existing ep93xx drivers have power management support. - * But, this is basically what the pxa27x_keypad driver does. - */ -static int ep93xx_keypad_suspend(struct platform_device *pdev, - pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int ep93xx_keypad_suspend(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); struct input_dev *input_dev = keypad->input_dev; @@ -210,8 +204,9 @@ static int ep93xx_keypad_suspend(struct platform_device *pdev, return 0; } -static int ep93xx_keypad_resume(struct platform_device *pdev) +static int ep93xx_keypad_resume(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); struct input_dev *input_dev = keypad->input_dev; @@ -232,10 +227,10 @@ static int ep93xx_keypad_resume(struct platform_device *pdev) return 0; } -#else /* !CONFIG_PM */ -#define ep93xx_keypad_suspend NULL -#define ep93xx_keypad_resume NULL -#endif /* !CONFIG_PM */ +#endif + +static SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops, + ep93xx_keypad_suspend, ep93xx_keypad_resume); static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) { @@ -308,19 +303,16 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) input_dev->open = ep93xx_keypad_open; input_dev->close = ep93xx_keypad_close; input_dev->dev.parent = &pdev->dev; - input_dev->keycode = keypad->keycodes; - input_dev->keycodesize = sizeof(keypad->keycodes[0]); - input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); - input_set_drvdata(input_dev, keypad); + err = matrix_keypad_build_keymap(keymap_data, NULL, + EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS, + keypad->keycodes, input_dev); + if (err) + goto failed_free_dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY); if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT) - input_dev->evbit[0] |= BIT_MASK(EV_REP); - - matrix_keypad_build_keymap(keymap_data, 3, - input_dev->keycode, input_dev->keybit); - platform_set_drvdata(pdev, keypad); + __set_bit(EV_REP, input_dev->evbit); + input_set_drvdata(input_dev, keypad); err = request_irq(keypad->irq, ep93xx_keypad_irq_handler, 0, pdev->name, keypad); @@ -331,6 +323,7 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) if (err) goto failed_free_irq; + platform_set_drvdata(pdev, keypad); device_init_wakeup(&pdev->dev, 1); return 0; @@ -384,11 +377,10 @@ static struct platform_driver ep93xx_keypad_driver = { .driver = { .name = "ep93xx-keypad", .owner = THIS_MODULE, + .pm = &ep93xx_keypad_pm_ops, }, .probe = ep93xx_keypad_probe, .remove = __devexit_p(ep93xx_keypad_remove), - .suspend = ep93xx_keypad_suspend, - .resume = ep93xx_keypad_resume, }; module_platform_driver(ep93xx_keypad_driver); diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index fed31e0947a1..589e3c258f3f 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -583,15 +583,4 @@ static struct serio_driver hil_serio_drv = { .interrupt = hil_dev_interrupt }; -static int __init hil_dev_init(void) -{ - return serio_register_driver(&hil_serio_drv); -} - -static void __exit hil_dev_exit(void) -{ - serio_unregister_driver(&hil_serio_drv); -} - -module_init(hil_dev_init); -module_exit(hil_dev_exit); +module_serio_driver(hil_serio_drv); diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index fb87b3bcadb9..6ee7421e2321 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -481,7 +481,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) } if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) || - keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) { + keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) { dev_err(&pdev->dev, "invalid key data (too many rows or colums)\n"); error = -EINVAL; @@ -496,14 +496,17 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) input_dev->dev.parent = &pdev->dev; input_dev->open = imx_keypad_open; input_dev->close = imx_keypad_close; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - input_dev->keycode = keypad->keycodes; - input_dev->keycodesize = sizeof(keypad->keycodes[0]); - input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); - matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT, - keypad->keycodes, input_dev->keybit); + error = matrix_keypad_build_keymap(keymap_data, NULL, + MAX_MATRIX_KEY_ROWS, + MAX_MATRIX_KEY_COLS, + keypad->keycodes, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto failed_clock_put; + } + __set_bit(EV_REP, input_dev->evbit); input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_set_drvdata(input_dev, keypad); diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c index fa9bb6d235e2..fc0a63c2f278 100644 --- a/drivers/input/keyboard/lkkbd.c +++ b/drivers/input/keyboard/lkkbd.c @@ -731,19 +731,4 @@ static struct serio_driver lkkbd_drv = { .interrupt = lkkbd_interrupt, }; -/* - * The functions for insering/removing us as a module. - */ -static int __init lkkbd_init(void) -{ - return serio_register_driver(&lkkbd_drv); -} - -static void __exit lkkbd_exit(void) -{ - serio_unregister_driver(&lkkbd_drv); -} - -module_init(lkkbd_init); -module_exit(lkkbd_exit); - +module_serio_driver(lkkbd_drv); diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c new file mode 100644 index 000000000000..ca168a6679de --- /dev/null +++ b/drivers/input/keyboard/lm8333.c @@ -0,0 +1,235 @@ +/* + * LM8333 keypad driver + * Copyright (C) 2012 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define LM8333_FIFO_READ 0x20 +#define LM8333_DEBOUNCE 0x22 +#define LM8333_READ_INT 0xD0 +#define LM8333_ACTIVE 0xE4 +#define LM8333_READ_ERROR 0xF0 + +#define LM8333_KEYPAD_IRQ (1 << 0) +#define LM8333_ERROR_IRQ (1 << 3) + +#define LM8333_ERROR_KEYOVR 0x04 +#define LM8333_ERROR_FIFOOVR 0x40 + +#define LM8333_FIFO_TRANSFER_SIZE 16 + +#define LM8333_NUM_ROWS 8 +#define LM8333_NUM_COLS 16 +#define LM8333_ROW_SHIFT 4 + +struct lm8333 { + struct i2c_client *client; + struct input_dev *input; + unsigned short keycodes[LM8333_NUM_ROWS << LM8333_ROW_SHIFT]; +}; + +/* The accessors try twice because the first access may be needed for wakeup */ +#define LM8333_READ_RETRIES 2 + +int lm8333_read8(struct lm8333 *lm8333, u8 cmd) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_read_byte_data(lm8333->client, cmd); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_write_byte_data(lm8333->client, cmd, val); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_read_i2c_block_data(lm8333->client, + cmd, len, buf); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +static void lm8333_key_handler(struct lm8333 *lm8333) +{ + struct input_dev *input = lm8333->input; + u8 keys[LM8333_FIFO_TRANSFER_SIZE]; + u8 code, pressed; + int i, ret; + + ret = lm8333_read_block(lm8333, LM8333_FIFO_READ, + LM8333_FIFO_TRANSFER_SIZE, keys); + if (ret != LM8333_FIFO_TRANSFER_SIZE) { + dev_err(&lm8333->client->dev, + "Error %d while reading FIFO\n", ret); + return; + } + + for (i = 0; keys[i] && i < LM8333_FIFO_TRANSFER_SIZE; i++) { + pressed = keys[i] & 0x80; + code = keys[i] & 0x7f; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, lm8333->keycodes[code], pressed); + } + + input_sync(input); +} + +static irqreturn_t lm8333_irq_thread(int irq, void *data) +{ + struct lm8333 *lm8333 = data; + u8 status = lm8333_read8(lm8333, LM8333_READ_INT); + + if (!status) + return IRQ_NONE; + + if (status & LM8333_ERROR_IRQ) { + u8 err = lm8333_read8(lm8333, LM8333_READ_ERROR); + + if (err & (LM8333_ERROR_KEYOVR | LM8333_ERROR_FIFOOVR)) { + u8 dummy[LM8333_FIFO_TRANSFER_SIZE]; + + lm8333_read_block(lm8333, LM8333_FIFO_READ, + LM8333_FIFO_TRANSFER_SIZE, dummy); + } + dev_err(&lm8333->client->dev, "Got error %02x\n", err); + } + + if (status & LM8333_KEYPAD_IRQ) + lm8333_key_handler(lm8333); + + return IRQ_HANDLED; +} + +static int __devinit lm8333_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct lm8333_platform_data *pdata = client->dev.platform_data; + struct lm8333 *lm8333; + struct input_dev *input; + int err, active_time; + + if (!pdata) + return -EINVAL; + + active_time = pdata->active_time ?: 500; + if (active_time / 3 <= pdata->debounce_time / 3) { + dev_err(&client->dev, "Active time not big enough!\n"); + return -EINVAL; + } + + lm8333 = kzalloc(sizeof(*lm8333), GFP_KERNEL); + input = input_allocate_device(); + if (!lm8333 || !input) { + err = -ENOMEM; + goto free_mem; + } + + lm8333->client = client; + lm8333->input = input; + + input->name = client->name; + input->dev.parent = &client->dev; + input->id.bustype = BUS_I2C; + + input_set_capability(input, EV_MSC, MSC_SCAN); + + err = matrix_keypad_build_keymap(pdata->matrix_data, NULL, + LM8333_NUM_ROWS, LM8333_NUM_COLS, + lm8333->keycodes, input); + if (err) + goto free_mem; + + if (pdata->debounce_time) { + err = lm8333_write8(lm8333, LM8333_DEBOUNCE, + pdata->debounce_time / 3); + if (err) + dev_warn(&client->dev, "Unable to set debounce time\n"); + } + + if (pdata->active_time) { + err = lm8333_write8(lm8333, LM8333_ACTIVE, + pdata->active_time / 3); + if (err) + dev_warn(&client->dev, "Unable to set active time\n"); + } + + err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "lm8333", lm8333); + if (err) + goto free_mem; + + err = input_register_device(input); + if (err) + goto free_irq; + + i2c_set_clientdata(client, lm8333); + return 0; + + free_irq: + free_irq(client->irq, lm8333); + free_mem: + input_free_device(input); + kfree(lm8333); + return err; +} + +static int __devexit lm8333_remove(struct i2c_client *client) +{ + struct lm8333 *lm8333 = i2c_get_clientdata(client); + + free_irq(client->irq, lm8333); + input_unregister_device(lm8333->input); + kfree(lm8333); + + return 0; +} + +static const struct i2c_device_id lm8333_id[] = { + { "lm8333", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm8333_id); + +static struct i2c_driver lm8333_driver = { + .driver = { + .name = "lm8333", + .owner = THIS_MODULE, + }, + .probe = lm8333_probe, + .remove = __devexit_p(lm8333_remove), + .id_table = lm8333_id, +}; +module_i2c_driver(lm8333_driver); + +MODULE_AUTHOR("Wolfram Sang "); +MODULE_DESCRIPTION("LM8333 keyboard driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 9b223d73de32..18b72372028a 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -27,7 +27,6 @@ struct matrix_keypad { const struct matrix_keypad_platform_data *pdata; struct input_dev *input_dev; - unsigned short *keycodes; unsigned int row_shift; DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS); @@ -38,6 +37,8 @@ struct matrix_keypad { bool scan_pending; bool stopped; bool gpio_all_disabled; + + unsigned short keycodes[]; }; /* @@ -224,7 +225,7 @@ static void matrix_keypad_stop(struct input_dev *dev) disable_row_irqs(keypad); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad) { const struct matrix_keypad_platform_data *pdata = keypad->pdata; @@ -293,16 +294,16 @@ static int matrix_keypad_resume(struct device *dev) return 0; } - -static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops, - matrix_keypad_suspend, matrix_keypad_resume); #endif -static int __devinit init_matrix_gpio(struct platform_device *pdev, - struct matrix_keypad *keypad) +static SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops, + matrix_keypad_suspend, matrix_keypad_resume); + +static int __devinit matrix_keypad_init_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) { const struct matrix_keypad_platform_data *pdata = keypad->pdata; - int i, err = -EINVAL; + int i, err; /* initialized strobe lines as outputs, activated */ for (i = 0; i < pdata->num_col_gpios; i++) { @@ -348,8 +349,7 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev, "matrix-keypad", keypad); if (err) { dev_err(&pdev->dev, - "Unable to acquire interrupt " - "for GPIO line %i\n", + "Unable to acquire interrupt for GPIO line %i\n", pdata->row_gpios[i]); goto err_free_irqs; } @@ -375,14 +375,33 @@ err_free_cols: return err; } +static void matrix_keypad_free_gpio(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (pdata->clustered_irq > 0) { + free_irq(pdata->clustered_irq, keypad); + } else { + for (i = 0; i < pdata->num_row_gpios; i++) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + } + + for (i = 0; i < pdata->num_row_gpios; i++) + gpio_free(pdata->row_gpios[i]); + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); +} + static int __devinit matrix_keypad_probe(struct platform_device *pdev) { const struct matrix_keypad_platform_data *pdata; const struct matrix_keymap_data *keymap_data; struct matrix_keypad *keypad; struct input_dev *input_dev; - unsigned short *keycodes; unsigned int row_shift; + size_t keymap_size; int err; pdata = pdev->dev.platform_data; @@ -398,20 +417,18 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev) } row_shift = get_count_order(pdata->num_col_gpios); - - keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); - keycodes = kzalloc((pdata->num_row_gpios << row_shift) * - sizeof(*keycodes), - GFP_KERNEL); + keymap_size = (pdata->num_row_gpios << row_shift) * + sizeof(keypad->keycodes[0]); + keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size, + GFP_KERNEL); input_dev = input_allocate_device(); - if (!keypad || !keycodes || !input_dev) { + if (!keypad || !input_dev) { err = -ENOMEM; goto err_free_mem; } keypad->input_dev = input_dev; keypad->pdata = pdata; - keypad->keycodes = keycodes; keypad->row_shift = row_shift; keypad->stopped = true; INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); @@ -420,38 +437,38 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev) input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY); - if (!pdata->no_autorepeat) - input_dev->evbit[0] |= BIT_MASK(EV_REP); input_dev->open = matrix_keypad_start; input_dev->close = matrix_keypad_stop; - input_dev->keycode = keycodes; - input_dev->keycodesize = sizeof(*keycodes); - input_dev->keycodemax = pdata->num_row_gpios << row_shift; - - matrix_keypad_build_keymap(keymap_data, row_shift, - input_dev->keycode, input_dev->keybit); + err = matrix_keypad_build_keymap(keymap_data, NULL, + pdata->num_row_gpios, + pdata->num_col_gpios, + keypad->keycodes, input_dev); + if (err) + goto err_free_mem; + if (!pdata->no_autorepeat) + __set_bit(EV_REP, input_dev->evbit); input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_set_drvdata(input_dev, keypad); - err = init_matrix_gpio(pdev, keypad); + err = matrix_keypad_init_gpio(pdev, keypad); if (err) goto err_free_mem; err = input_register_device(keypad->input_dev); if (err) - goto err_free_mem; + goto err_free_gpio; device_init_wakeup(&pdev->dev, pdata->wakeup); platform_set_drvdata(pdev, keypad); return 0; +err_free_gpio: + matrix_keypad_free_gpio(keypad); err_free_mem: input_free_device(input_dev); - kfree(keycodes); kfree(keypad); return err; } @@ -459,29 +476,15 @@ err_free_mem: static int __devexit matrix_keypad_remove(struct platform_device *pdev) { struct matrix_keypad *keypad = platform_get_drvdata(pdev); - const struct matrix_keypad_platform_data *pdata = keypad->pdata; - int i; device_init_wakeup(&pdev->dev, 0); - if (pdata->clustered_irq > 0) { - free_irq(pdata->clustered_irq, keypad); - } else { - for (i = 0; i < pdata->num_row_gpios; i++) - free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); - } - - for (i = 0; i < pdata->num_row_gpios; i++) - gpio_free(pdata->row_gpios[i]); - - for (i = 0; i < pdata->num_col_gpios; i++) - gpio_free(pdata->col_gpios[i]); - + matrix_keypad_free_gpio(keypad); input_unregister_device(keypad->input_dev); - platform_set_drvdata(pdev, NULL); - kfree(keypad->keycodes); kfree(keypad); + platform_set_drvdata(pdev, NULL); + return 0; } @@ -491,9 +494,7 @@ static struct platform_driver matrix_keypad_driver = { .driver = { .name = "matrix-keypad", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &matrix_keypad_pm_ops, -#endif }, }; module_platform_driver(matrix_keypad_driver); diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c index 48d1cab0aa1c..f971898ad591 100644 --- a/drivers/input/keyboard/newtonkbd.c +++ b/drivers/input/keyboard/newtonkbd.c @@ -166,15 +166,4 @@ static struct serio_driver nkbd_drv = { .disconnect = nkbd_disconnect, }; -static int __init nkbd_init(void) -{ - return serio_register_driver(&nkbd_drv); -} - -static void __exit nkbd_exit(void) -{ - serio_unregister_driver(&nkbd_drv); -} - -module_init(nkbd_init); -module_exit(nkbd_exit); +module_serio_driver(nkbd_drv); diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c index 101e245944e7..4ea4341a68c5 100644 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -39,7 +39,8 @@ #define SKE_KPRISA (0x1 << 2) #define SKE_KEYPAD_ROW_SHIFT 3 -#define SKE_KPD_KEYMAP_SIZE (8 * 8) +#define SKE_KPD_NUM_ROWS 8 +#define SKE_KPD_NUM_COLS 8 /* keypad auto scan registers */ #define SKE_ASR0 0x20 @@ -63,7 +64,7 @@ struct ske_keypad { void __iomem *reg_base; struct input_dev *input; const struct ske_keypad_platform_data *board; - unsigned short keymap[SKE_KPD_KEYMAP_SIZE]; + unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; struct clk *clk; spinlock_t ske_keypad_lock; }; @@ -261,19 +262,18 @@ static int __init ske_keypad_probe(struct platform_device *pdev) input->name = "ux500-ske-keypad"; input->dev.parent = &pdev->dev; - input->keycode = keypad->keymap; - input->keycodesize = sizeof(keypad->keymap[0]); - input->keycodemax = ARRAY_SIZE(keypad->keymap); + error = matrix_keypad_build_keymap(plat->keymap_data, NULL, + SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, + keypad->keymap, input); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + goto err_iounmap; + } input_set_capability(input, EV_MSC, MSC_SCAN); - - __set_bit(EV_KEY, input->evbit); if (!plat->no_autorepeat) __set_bit(EV_REP, input->evbit); - matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT, - input->keycode, input->keybit); - clk_enable(keypad->clk); /* go through board initialization helpers */ diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 6b630d9d3dff..a0222db4dc86 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -61,6 +61,7 @@ struct omap_kp { unsigned int cols; unsigned long delay; unsigned int debounce; + unsigned short keymap[]; }; static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0); @@ -316,13 +317,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) if (!cpu_is_omap24xx()) omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - input_dev->keycode = &omap_kp[1]; - input_dev->keycodesize = sizeof(unsigned short); - input_dev->keycodemax = keycodemax; - - if (pdata->rep) - __set_bit(EV_REP, input_dev->evbit); - if (pdata->delay) omap_kp->delay = pdata->delay; @@ -371,9 +365,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) goto err2; /* setup input device */ - __set_bit(EV_KEY, input_dev->evbit); - matrix_keypad_build_keymap(pdata->keymap_data, row_shift, - input_dev->keycode, input_dev->keybit); input_dev->name = "omap-keypad"; input_dev->phys = "omap-keypad/input0"; input_dev->dev.parent = &pdev->dev; @@ -383,6 +374,15 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) input_dev->id.product = 0x0001; input_dev->id.version = 0x0100; + if (pdata->rep) + __set_bit(EV_REP, input_dev->evbit); + + ret = matrix_keypad_build_keymap(pdata->keymap_data, NULL, + pdata->rows, pdata->cols, + omap_kp->keymap, input_dev); + if (ret < 0) + goto err3; + ret = input_register_device(omap_kp->input); if (ret < 0) { printk(KERN_ERR "Unable to register omap-keypad input device\n"); diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index e809ac095a38..aed5f6999ce2 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -68,19 +68,52 @@ #define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF +enum { + KBD_REVISION_OMAP4 = 0, + KBD_REVISION_OMAP5, +}; + struct omap4_keypad { struct input_dev *input; void __iomem *base; - int irq; + unsigned int irq; unsigned int rows; unsigned int cols; + u32 reg_offset; + u32 irqreg_offset; unsigned int row_shift; unsigned char key_state[8]; unsigned short keymap[]; }; +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) +{ + return __raw_readl(keypad_data->base + + keypad_data->reg_offset + offset); +} + +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) +{ + __raw_writel(value, + keypad_data->base + keypad_data->reg_offset + offset); +} + +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) +{ + return __raw_readl(keypad_data->base + + keypad_data->irqreg_offset + offset); +} + +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, + u32 offset, u32 value) +{ + __raw_writel(value, + keypad_data->base + keypad_data->irqreg_offset + offset); +} + + /* Interrupt handler */ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) { @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) u32 *new_state = (u32 *) key_state; /* Disable interrupts */ - __raw_writel(OMAP4_VAL_IRQDISABLE, - keypad_data->base + OMAP4_KBD_IRQENABLE); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, + OMAP4_VAL_IRQDISABLE); - *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); - *(new_state + 1) = __raw_readl(keypad_data->base - + OMAP4_KBD_FULLCODE63_32); + *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); + *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); for (row = 0; row < keypad_data->rows; row++) { changed = key_state[row] ^ keypad_data->key_state[row]; @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) sizeof(keypad_data->key_state)); /* clear pending interrupts */ - __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), - keypad_data->base + OMAP4_KBD_IRQSTATUS); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); /* enable interrupts */ - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, - keypad_data->base + OMAP4_KBD_IRQENABLE); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, + OMAP4_DEF_IRQENABLE_EVENTEN | + OMAP4_DEF_IRQENABLE_LONGKEY); return IRQ_HANDLED; } @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input) disable_irq(keypad_data->irq); - __raw_writel(OMAP4_VAL_FUNCTIONALCFG, - keypad_data->base + OMAP4_KBD_CTRL); - __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, - keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); - __raw_writel(OMAP4_VAL_IRQDISABLE, - keypad_data->base + OMAP4_KBD_IRQSTATUS); - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, - keypad_data->base + OMAP4_KBD_IRQENABLE); - __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, - keypad_data->base + OMAP4_KBD_WAKEUPENABLE); + kbd_writel(keypad_data, OMAP4_KBD_CTRL, + OMAP4_VAL_FUNCTIONALCFG); + kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, + OMAP4_VAL_DEBOUNCINGTIME); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, + OMAP4_VAL_IRQDISABLE); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, + OMAP4_DEF_IRQENABLE_EVENTEN | + OMAP4_DEF_IRQENABLE_LONGKEY); + kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, + OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); enable_irq(keypad_data->irq); @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input) disable_irq(keypad_data->irq); /* Disable interrupts */ - __raw_writel(OMAP4_VAL_IRQDISABLE, - keypad_data->base + OMAP4_KBD_IRQENABLE); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, + OMAP4_VAL_IRQDISABLE); /* clear pending interrupts */ - __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), - keypad_data->base + OMAP4_KBD_IRQSTATUS); + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); enable_irq(keypad_data->irq); @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) struct resource *res; resource_size_t size; unsigned int row_shift, max_keys; + int rev; int irq; int error; @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) keypad_data->rows = pdata->rows; keypad_data->cols = pdata->cols; + /* + * Enable clocks for the keypad module so that we can read + * revision register. + */ + pm_runtime_enable(&pdev->dev); + error = pm_runtime_get_sync(&pdev->dev); + if (error) { + dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); + goto err_unmap; + } + rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); + rev &= 0x03 << 30; + rev >>= 30; + switch (rev) { + case KBD_REVISION_OMAP4: + keypad_data->reg_offset = 0x00; + keypad_data->irqreg_offset = 0x00; + break; + case KBD_REVISION_OMAP5: + keypad_data->reg_offset = 0x10; + keypad_data->irqreg_offset = 0x0c; + break; + default: + dev_err(&pdev->dev, + "Keypad reports unsupported revision %d", rev); + error = -EINVAL; + goto err_pm_put_sync; + } + /* input device allocation */ keypad_data->input = input_dev = input_allocate_device(); if (!input_dev) { error = -ENOMEM; - goto err_unmap; + goto err_pm_put_sync; } input_dev->name = pdev->name; @@ -258,20 +322,19 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) input_dev->open = omap4_keypad_open; input_dev->close = omap4_keypad_close; - input_dev->keycode = keypad_data->keymap; - input_dev->keycodesize = sizeof(keypad_data->keymap[0]); - input_dev->keycodemax = max_keys; + error = matrix_keypad_build_keymap(pdata->keymap_data, NULL, + pdata->rows, pdata->cols, + keypad_data->keymap, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto err_free_input; + } - __set_bit(EV_KEY, input_dev->evbit); __set_bit(EV_REP, input_dev->evbit); - input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_set_drvdata(input_dev, keypad_data); - matrix_keypad_build_keymap(pdata->keymap_data, row_shift, - input_dev->keycode, input_dev->keybit); - error = request_irq(keypad_data->irq, omap4_keypad_interrupt, IRQF_TRIGGER_RISING, "omap4-keypad", keypad_data); @@ -280,7 +343,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) goto err_free_input; } - pm_runtime_enable(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); error = input_register_device(keypad_data->input); if (error < 0) { @@ -296,6 +359,8 @@ err_pm_disable: free_irq(keypad_data->irq, keypad_data); err_free_input: input_free_device(input_dev); +err_pm_put_sync: + pm_runtime_put_sync(&pdev->dev); err_unmap: iounmap(keypad_data->base); err_release_mem: diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 01a1c9f8a383..52c34657d301 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -626,21 +626,21 @@ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev) kp->input->id.product = 0x0001; kp->input->id.vendor = 0x0001; - kp->input->evbit[0] = BIT_MASK(EV_KEY); - - if (pdata->rep) - __set_bit(EV_REP, kp->input->evbit); - - kp->input->keycode = kp->keycodes; - kp->input->keycodemax = PM8XXX_MATRIX_MAX_SIZE; - kp->input->keycodesize = sizeof(kp->keycodes); kp->input->open = pmic8xxx_kp_open; kp->input->close = pmic8xxx_kp_close; - matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT, - kp->input->keycode, kp->input->keybit); + rc = matrix_keypad_build_keymap(keymap_data, NULL, + PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS, + kp->keycodes, kp->input); + if (rc) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto err_get_irq; + } + if (pdata->rep) + __set_bit(EV_REP, kp->input->evbit); input_set_capability(kp->input, EV_MSC, MSC_SCAN); + input_set_drvdata(kp->input, kp); /* initialize keypad state */ diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c index 2391ae884fee..a061ba603a29 100644 --- a/drivers/input/keyboard/samsung-keypad.c +++ b/drivers/input/keyboard/samsung-keypad.c @@ -454,23 +454,23 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; - input_set_drvdata(input_dev, keypad); input_dev->open = samsung_keypad_open; input_dev->close = samsung_keypad_close; - input_dev->evbit[0] = BIT_MASK(EV_KEY); - if (!pdata->no_autorepeat) - input_dev->evbit[0] |= BIT_MASK(EV_REP); + error = matrix_keypad_build_keymap(keymap_data, NULL, + pdata->rows, pdata->cols, + keypad->keycodes, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto err_put_clk; + } input_set_capability(input_dev, EV_MSC, MSC_SCAN); + if (!pdata->no_autorepeat) + __set_bit(EV_REP, input_dev->evbit); - input_dev->keycode = keypad->keycodes; - input_dev->keycodesize = sizeof(keypad->keycodes[0]); - input_dev->keycodemax = pdata->rows << row_shift; - - matrix_keypad_build_keymap(keymap_data, row_shift, - input_dev->keycode, input_dev->keybit); + input_set_drvdata(input_dev, keypad); keypad->irq = platform_get_irq(pdev, 0); if (keypad->irq < 0) { diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index 3b6b528f02fd..6f287f7e1538 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -49,7 +50,9 @@ #define KEY_VALUE 0x00FFFFFF #define ROW_MASK 0xF0 #define COLUMN_MASK 0x0F -#define ROW_SHIFT 4 +#define NUM_ROWS 16 +#define NUM_COLS 16 + #define KEY_MATRIX_SHIFT 6 struct spear_kbd { @@ -60,7 +63,8 @@ struct spear_kbd { unsigned int irq; unsigned int mode; unsigned short last_key; - unsigned short keycodes[256]; + unsigned short keycodes[NUM_ROWS * NUM_COLS]; + bool rep; }; static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id) @@ -136,27 +140,49 @@ static void spear_kbd_close(struct input_dev *dev) kbd->last_key = KEY_RESERVED; } +#ifdef CONFIG_OF +static int __devinit spear_kbd_parse_dt(struct platform_device *pdev, + struct spear_kbd *kbd) +{ + struct device_node *np = pdev->dev.of_node; + int error; + u32 val; + + if (!np) { + dev_err(&pdev->dev, "Missing DT data\n"); + return -EINVAL; + } + + if (of_property_read_bool(np, "autorepeat")) + kbd->rep = true; + + error = of_property_read_u32(np, "st,mode", &val); + if (error) { + dev_err(&pdev->dev, "DT: Invalid or missing mode\n"); + return error; + } + + kbd->mode = val; + return 0; +} +#else +static inline int spear_kbd_parse_dt(struct platform_device *pdev, + struct spear_kbd *kbd) +{ + return -ENOSYS; +} +#endif + static int __devinit spear_kbd_probe(struct platform_device *pdev) { - const struct kbd_platform_data *pdata = pdev->dev.platform_data; - const struct matrix_keymap_data *keymap; + struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev); + const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL; struct spear_kbd *kbd; struct input_dev *input_dev; struct resource *res; int irq; int error; - if (!pdata) { - dev_err(&pdev->dev, "Invalid platform data\n"); - return -EINVAL; - } - - keymap = pdata->keymap; - if (!keymap) { - dev_err(&pdev->dev, "no keymap defined\n"); - return -EINVAL; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "no keyboard resource defined\n"); @@ -179,7 +205,15 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev) kbd->input = input_dev; kbd->irq = irq; - kbd->mode = pdata->mode; + + if (!pdata) { + error = spear_kbd_parse_dt(pdev, kbd); + if (error) + goto err_free_mem; + } else { + kbd->mode = pdata->mode; + kbd->rep = pdata->rep; + } kbd->res = request_mem_region(res->start, resource_size(res), pdev->name); @@ -212,18 +246,17 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev) input_dev->open = spear_kbd_open; input_dev->close = spear_kbd_close; - __set_bit(EV_KEY, input_dev->evbit); - if (pdata->rep) + error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS, + kbd->keycodes, input_dev); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + goto err_put_clk; + } + + if (kbd->rep) __set_bit(EV_REP, input_dev->evbit); input_set_capability(input_dev, EV_MSC, MSC_SCAN); - input_dev->keycode = kbd->keycodes; - input_dev->keycodesize = sizeof(kbd->keycodes[0]); - input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes); - - matrix_keypad_build_keymap(keymap, ROW_SHIFT, - input_dev->keycode, input_dev->keybit); - input_set_drvdata(input_dev, kbd); error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd); @@ -317,6 +350,14 @@ static int spear_kbd_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume); +#ifdef CONFIG_OF +static const struct of_device_id spear_kbd_id_table[] = { + { .compatible = "st,spear300-kbd" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_kbd_id_table); +#endif + static struct platform_driver spear_kbd_driver = { .probe = spear_kbd_probe, .remove = __devexit_p(spear_kbd_remove), @@ -324,6 +365,7 @@ static struct platform_driver spear_kbd_driver = { .name = "keyboard", .owner = THIS_MODULE, .pm = &spear_kbd_pm_ops, + .of_match_table = of_match_ptr(spear_kbd_id_table), }, }; module_platform_driver(spear_kbd_driver); diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c index 9397cf9c625c..470a8778dec1 100644 --- a/drivers/input/keyboard/stmpe-keypad.c +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -289,19 +289,17 @@ static int __devinit stmpe_keypad_probe(struct platform_device *pdev) input->id.bustype = BUS_I2C; input->dev.parent = &pdev->dev; - input_set_capability(input, EV_MSC, MSC_SCAN); + ret = matrix_keypad_build_keymap(plat->keymap_data, NULL, + STMPE_KEYPAD_MAX_ROWS, + STMPE_KEYPAD_MAX_COLS, + keypad->keymap, input); + if (ret) + goto out_freeinput; - __set_bit(EV_KEY, input->evbit); + input_set_capability(input, EV_MSC, MSC_SCAN); if (!plat->no_autorepeat) __set_bit(EV_REP, input->evbit); - input->keycode = keypad->keymap; - input->keycodesize = sizeof(keypad->keymap[0]); - input->keycodemax = ARRAY_SIZE(keypad->keymap); - - matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT, - input->keycode, input->keybit); - for (i = 0; i < plat->keymap_data->keymap_size; i++) { unsigned int key = plat->keymap_data->keymap[i]; diff --git a/drivers/input/keyboard/stowaway.c b/drivers/input/keyboard/stowaway.c index 7437219370b1..cc612c5d5427 100644 --- a/drivers/input/keyboard/stowaway.c +++ b/drivers/input/keyboard/stowaway.c @@ -170,15 +170,4 @@ static struct serio_driver skbd_drv = { .disconnect = skbd_disconnect, }; -static int __init skbd_init(void) -{ - return serio_register_driver(&skbd_drv); -} - -static void __exit skbd_exit(void) -{ - serio_unregister_driver(&skbd_drv); -} - -module_init(skbd_init); -module_exit(skbd_exit); +module_serio_driver(skbd_drv); diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c index a99a04b03ee4..5f836b1638c1 100644 --- a/drivers/input/keyboard/sunkbd.c +++ b/drivers/input/keyboard/sunkbd.c @@ -369,19 +369,4 @@ static struct serio_driver sunkbd_drv = { .disconnect = sunkbd_disconnect, }; -/* - * The functions for insering/removing us as a module. - */ - -static int __init sunkbd_init(void) -{ - return serio_register_driver(&sunkbd_drv); -} - -static void __exit sunkbd_exit(void) -{ - serio_unregister_driver(&sunkbd_drv); -} - -module_init(sunkbd_init); -module_exit(sunkbd_exit); +module_serio_driver(sunkbd_drv); diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index 2dee3e4e7c6f..7d498e698508 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -78,7 +78,7 @@ * @input: pointer to input device object * @board: keypad platform device * @krow: number of rows - * @kcol: number of coloumns + * @kcol: number of columns * @keymap: matrix scan code table for keycodes * @keypad_stopped: holds keypad status */ @@ -96,21 +96,15 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) { int ret; struct tc3589x *tc3589x = keypad->tc3589x; - u8 settle_time = keypad->board->settle_time; - u8 dbounce_period = keypad->board->debounce_period; - u8 rows = keypad->board->krow & 0xf; /* mask out the nibble */ - u8 column = keypad->board->kcol & 0xf; /* mask out the nibble */ + const struct tc3589x_keypad_platform_data *board = keypad->board; - /* validate platform configurations */ - if (keypad->board->kcol > TC3589x_MAX_KPCOL || - keypad->board->krow > TC3589x_MAX_KPROW || - keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE || - keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE) + /* validate platform configuration */ + if (board->kcol > TC3589x_MAX_KPCOL || board->krow > TC3589x_MAX_KPROW) return -EINVAL; /* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */ ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE, - (rows << KP_ROW_SHIFT) | column); + (board->krow << KP_ROW_SHIFT) | board->kcol); if (ret < 0) return ret; @@ -124,12 +118,14 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) return ret; /* Configure settle time */ - ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time); + ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, + board->settle_time); if (ret < 0) return ret; /* Configure debounce time */ - ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period); + ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, + board->debounce_period); if (ret < 0) return ret; @@ -337,23 +333,22 @@ static int __devinit tc3589x_keypad_probe(struct platform_device *pdev) input->name = pdev->name; input->dev.parent = &pdev->dev; - input->keycode = keypad->keymap; - input->keycodesize = sizeof(keypad->keymap[0]); - input->keycodemax = ARRAY_SIZE(keypad->keymap); - input->open = tc3589x_keypad_open; input->close = tc3589x_keypad_close; - input_set_drvdata(input, keypad); + error = matrix_keypad_build_keymap(plat->keymap_data, NULL, + TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL, + keypad->keymap, input); + if (error) { + dev_err(&pdev->dev, "Failed to build keymap\n"); + goto err_free_mem; + } input_set_capability(input, EV_MSC, MSC_SCAN); - - __set_bit(EV_KEY, input->evbit); if (!plat->no_autorepeat) __set_bit(EV_REP, input->evbit); - matrix_keypad_build_keymap(plat->keymap_data, 0x3, - input->keycode, input->keybit); + input_set_drvdata(input, keypad); error = request_threaded_irq(irq, NULL, tc3589x_keypad_irq, plat->irqtype, diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c index 958ec107bfbc..5f87b28b3192 100644 --- a/drivers/input/keyboard/tca8418_keypad.c +++ b/drivers/input/keyboard/tca8418_keypad.c @@ -342,21 +342,20 @@ static int __devinit tca8418_keypad_probe(struct i2c_client *client, input->id.product = 0x001; input->id.version = 0x0001; - input->keycode = keypad_data->keymap; - input->keycodesize = sizeof(keypad_data->keymap[0]); - input->keycodemax = max_keys; + error = matrix_keypad_build_keymap(pdata->keymap_data, NULL, + pdata->rows, pdata->cols, + keypad_data->keymap, input); + if (error) { + dev_dbg(&client->dev, "Failed to build keymap\n"); + goto fail2; + } - __set_bit(EV_KEY, input->evbit); if (pdata->rep) __set_bit(EV_REP, input->evbit); - input_set_capability(input, EV_MSC, MSC_SCAN); input_set_drvdata(input, keypad_data); - matrix_keypad_build_keymap(pdata->keymap_data, row_shift, - input->keycode, input->keybit); - if (pdata->irq_is_gpio) client->irq = gpio_to_irq(client->irq); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index fe4ac95ca6c8..4ffe64d53107 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -619,8 +619,8 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata, } #ifdef CONFIG_OF -static struct tegra_kbc_platform_data * __devinit -tegra_kbc_dt_parse_pdata(struct platform_device *pdev) +static struct tegra_kbc_platform_data * __devinit tegra_kbc_dt_parse_pdata( + struct platform_device *pdev) { struct tegra_kbc_platform_data *pdata; struct device_node *np = pdev->dev.of_node; @@ -660,10 +660,6 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev) pdata->pin_cfg[KBC_MAX_ROW + i].type = PIN_CFG_COL; } - pdata->keymap_data = matrix_keyboard_of_fill_keymap(np, "linux,keymap"); - - /* FIXME: Add handling of linux,fn-keymap here */ - return pdata; } #else @@ -674,10 +670,36 @@ static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata( } #endif +static int __devinit tegra_kbd_setup_keymap(struct tegra_kbc *kbc) +{ + const struct tegra_kbc_platform_data *pdata = kbc->pdata; + const struct matrix_keymap_data *keymap_data = pdata->keymap_data; + unsigned int keymap_rows = KBC_MAX_KEY; + int retval; + + if (keymap_data && pdata->use_fn_map) + keymap_rows *= 2; + + retval = matrix_keypad_build_keymap(keymap_data, NULL, + keymap_rows, KBC_MAX_COL, + kbc->keycode, kbc->idev); + if (retval == -ENOSYS || retval == -ENOENT) { + /* + * If there is no OF support in kernel or keymap + * property is missing, use default keymap. + */ + retval = matrix_keypad_build_keymap( + &tegra_kbc_default_keymap_data, NULL, + keymap_rows, KBC_MAX_COL, + kbc->keycode, kbc->idev); + } + + return retval; +} + static int __devinit tegra_kbc_probe(struct platform_device *pdev) { const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data; - const struct matrix_keymap_data *keymap_data; struct tegra_kbc *kbc; struct input_dev *input_dev; struct resource *res; @@ -757,29 +779,26 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt; kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS); + kbc->wakeup_key = pdata->wakeup_key; + kbc->use_fn_map = pdata->use_fn_map; + kbc->use_ghost_filter = pdata->use_ghost_filter; + input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; input_dev->open = tegra_kbc_open; input_dev->close = tegra_kbc_close; - input_set_drvdata(input_dev, kbc); + err = tegra_kbd_setup_keymap(kbc); + if (err) { + dev_err(&pdev->dev, "failed to setup keymap\n"); + goto err_put_clk; + } - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + __set_bit(EV_REP, input_dev->evbit); input_set_capability(input_dev, EV_MSC, MSC_SCAN); - input_dev->keycode = kbc->keycode; - input_dev->keycodesize = sizeof(kbc->keycode[0]); - input_dev->keycodemax = KBC_MAX_KEY; - if (pdata->use_fn_map) - input_dev->keycodemax *= 2; - - kbc->use_fn_map = pdata->use_fn_map; - kbc->use_ghost_filter = pdata->use_ghost_filter; - keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data; - matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT, - input_dev->keycode, input_dev->keybit); - kbc->wakeup_key = pdata->wakeup_key; + input_set_drvdata(input_dev, kbc); err = request_irq(kbc->irq, tegra_kbc_isr, IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc); @@ -799,9 +818,6 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, kbc); device_init_wakeup(&pdev->dev, pdata->wakeup); - if (!pdev->dev.platform_data) - matrix_keyboard_of_free_keymap(pdata->keymap_data); - return 0; err_free_irq: @@ -816,10 +832,8 @@ err_free_mem: input_free_device(input_dev); kfree(kbc); err_free_pdata: - if (!pdev->dev.platform_data) { - matrix_keyboard_of_free_keymap(pdata->keymap_data); + if (!pdev->dev.platform_data) kfree(pdata); - } return err; } diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c index fb39c94b6fdd..a4a445fb7020 100644 --- a/drivers/input/keyboard/tnetv107x-keypad.c +++ b/drivers/input/keyboard/tnetv107x-keypad.c @@ -247,15 +247,11 @@ static int __devinit keypad_probe(struct platform_device *pdev) error = -ENOMEM; goto error_input; } - input_set_drvdata(kp->input_dev, kp); kp->input_dev->name = pdev->name; kp->input_dev->dev.parent = &pdev->dev; kp->input_dev->open = keypad_start; kp->input_dev->close = keypad_stop; - kp->input_dev->evbit[0] = BIT_MASK(EV_KEY); - if (!pdata->no_autorepeat) - kp->input_dev->evbit[0] |= BIT_MASK(EV_REP); clk_enable(kp->clk); rev = keypad_read(kp, rev); @@ -264,15 +260,20 @@ static int __devinit keypad_probe(struct platform_device *pdev) kp->input_dev->id.version = ((rev >> 16) & 0xfff); clk_disable(kp->clk); - kp->input_dev->keycode = kp->keycodes; - kp->input_dev->keycodesize = sizeof(kp->keycodes[0]); - kp->input_dev->keycodemax = kp->rows << kp->row_shift; - - matrix_keypad_build_keymap(keymap_data, kp->row_shift, kp->keycodes, - kp->input_dev->keybit); + error = matrix_keypad_build_keymap(keymap_data, NULL, + kp->rows, kp->cols, + kp->keycodes, kp->input_dev); + if (error) { + dev_err(dev, "Failed to build keymap\n"); + goto error_reg; + } + if (!pdata->no_autorepeat) + kp->input_dev->evbit[0] |= BIT_MASK(EV_REP); input_set_capability(kp->input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(kp->input_dev, kp); + error = input_register_device(kp->input_dev); if (error < 0) { dev_err(dev, "Could not register input device\n"); diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index 67bec14e8b96..a2c6f79aa101 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -361,14 +361,6 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev) kp->irq = platform_get_irq(pdev, 0); /* setup input device */ - __set_bit(EV_KEY, input->evbit); - - /* Enable auto repeat feature of Linux input subsystem */ - if (pdata->rep) - __set_bit(EV_REP, input->evbit); - - input_set_capability(input, EV_MSC, MSC_SCAN); - input->name = "TWL4030 Keypad"; input->phys = "twl4030_keypad/input0"; input->dev.parent = &pdev->dev; @@ -378,12 +370,19 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev) input->id.product = 0x0001; input->id.version = 0x0003; - input->keycode = kp->keymap; - input->keycodesize = sizeof(kp->keymap[0]); - input->keycodemax = ARRAY_SIZE(kp->keymap); + error = matrix_keypad_build_keymap(keymap_data, NULL, + TWL4030_MAX_ROWS, + 1 << TWL4030_ROW_SHIFT, + kp->keymap, input); + if (error) { + dev_err(kp->dbg_dev, "Failed to build keymap\n"); + goto err1; + } - matrix_keypad_build_keymap(keymap_data, TWL4030_ROW_SHIFT, - input->keycode, input->keybit); + input_set_capability(input, EV_MSC, MSC_SCAN); + /* Enable auto repeat feature of Linux input subsystem */ + if (pdata->rep) + __set_bit(EV_REP, input->evbit); error = input_register_device(input); if (error) { diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index 99bbb7e775ae..085ede4d972d 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -42,7 +42,8 @@ #define KGET_RAW(n) (((n) & KEY0R) >> 3) #define KGET_COLUMN(n) ((n) & KEY0C) -#define W90P910_MAX_KEY_NUM (8 * 8) +#define W90P910_NUM_ROWS 8 +#define W90P910_NUM_COLS 8 #define W90P910_ROW_SHIFT 3 struct w90p910_keypad { @@ -51,7 +52,7 @@ struct w90p910_keypad { struct input_dev *input_dev; void __iomem *mmio_base; int irq; - unsigned short keymap[W90P910_MAX_KEY_NUM]; + unsigned short keymap[W90P910_NUM_ROWS * W90P910_NUM_COLS]; }; static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad, @@ -190,17 +191,13 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) input_dev->close = w90p910_keypad_close; input_dev->dev.parent = &pdev->dev; - input_dev->keycode = keypad->keymap; - input_dev->keycodesize = sizeof(keypad->keymap[0]); - input_dev->keycodemax = ARRAY_SIZE(keypad->keymap); - - input_set_drvdata(input_dev, keypad); - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); - input_set_capability(input_dev, EV_MSC, MSC_SCAN); - - matrix_keypad_build_keymap(keymap_data, W90P910_ROW_SHIFT, - input_dev->keycode, input_dev->keybit); + error = matrix_keypad_build_keymap(keymap_data, NULL, + W90P910_NUM_ROWS, W90P910_NUM_COLS, + keypad->keymap, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + goto failed_put_clk; + } error = request_irq(keypad->irq, w90p910_keypad_irq_handler, 0, pdev->name, keypad); @@ -209,6 +206,10 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev) goto failed_put_clk; } + __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + /* Register the input device */ error = input_register_device(input_dev); if (error) { diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c index 37b01d777a4a..d050d9d0011b 100644 --- a/drivers/input/keyboard/xtkbd.c +++ b/drivers/input/keyboard/xtkbd.c @@ -169,15 +169,4 @@ static struct serio_driver xtkbd_drv = { .disconnect = xtkbd_disconnect, }; -static int __init xtkbd_init(void) -{ - return serio_register_driver(&xtkbd_drv); -} - -static void __exit xtkbd_exit(void) -{ - serio_unregister_driver(&xtkbd_drv); -} - -module_init(xtkbd_init); -module_exit(xtkbd_exit); +module_serio_driver(xtkbd_drv); diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c new file mode 100644 index 000000000000..443ad64b7f2a --- /dev/null +++ b/drivers/input/matrix-keymap.c @@ -0,0 +1,163 @@ +/* + * Helpers for matrix keyboard bindings + * + * Copyright (C) 2012 Google, Inc + * + * Author: + * Olof Johansson + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +static bool matrix_keypad_map_key(struct input_dev *input_dev, + unsigned int rows, unsigned int cols, + unsigned int row_shift, unsigned int key) +{ + unsigned short *keymap = input_dev->keycode; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + if (row >= rows || col >= cols) { + dev_err(input_dev->dev.parent, + "%s: invalid keymap entry 0x%x (row: %d, col: %d, rows: %d, cols: %d)\n", + __func__, key, row, col, rows, cols); + return false; + } + + keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code; + __set_bit(code, input_dev->keybit); + + return true; +} + +#ifdef CONFIG_OF +static int matrix_keypad_parse_of_keymap(const char *propname, + unsigned int rows, unsigned int cols, + struct input_dev *input_dev) +{ + struct device *dev = input_dev->dev.parent; + struct device_node *np = dev->of_node; + unsigned int row_shift = get_count_order(cols); + unsigned int max_keys = rows << row_shift; + unsigned int proplen, i, size; + const __be32 *prop; + + if (!np) + return -ENOENT; + + if (!propname) + propname = "linux,keymap"; + + prop = of_get_property(np, propname, &proplen); + if (!prop) { + dev_err(dev, "OF: %s property not defined in %s\n", + propname, np->full_name); + return -ENOENT; + } + + if (proplen % sizeof(u32)) { + dev_err(dev, "OF: Malformed keycode property %s in %s\n", + propname, np->full_name); + return -EINVAL; + } + + size = proplen / sizeof(u32); + if (size > max_keys) { + dev_err(dev, "OF: %s size overflow\n", propname); + return -EINVAL; + } + + for (i = 0; i < size; i++) { + unsigned int key = be32_to_cpup(prop + i); + + if (!matrix_keypad_map_key(input_dev, rows, cols, + row_shift, key)) + return -EINVAL; + } + + return 0; +} +#else +static int matrix_keypad_parse_of_keymap(const char *propname, + unsigned int rows, unsigned int cols, + struct input_dev *input_dev) +{ + return -ENOSYS; +} +#endif + +/** + * matrix_keypad_build_keymap - convert platform keymap into matrix keymap + * @keymap_data: keymap supplied by the platform code + * @keymap_name: name of device tree property containing keymap (if device + * tree support is enabled). + * @rows: number of rows in target keymap array + * @cols: number of cols in target keymap array + * @keymap: expanded version of keymap that is suitable for use by + * matrix keyboard driver + * @input_dev: input devices for which we are setting up the keymap + * + * This function converts platform keymap (encoded with KEY() macro) into + * an array of keycodes that is suitable for using in a standard matrix + * keyboard driver that uses row and col as indices. + * + * If @keymap_data is not supplied and device tree support is enabled + * it will attempt load the keymap from property specified by @keymap_name + * argument (or "linux,keymap" if @keymap_name is %NULL). + * + * Callers are expected to set up input_dev->dev.parent before calling this + * function. + */ +int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, + const char *keymap_name, + unsigned int rows, unsigned int cols, + unsigned short *keymap, + struct input_dev *input_dev) +{ + unsigned int row_shift = get_count_order(cols); + int i; + int error; + + input_dev->keycode = keymap; + input_dev->keycodesize = sizeof(*keymap); + input_dev->keycodemax = rows << row_shift; + + __set_bit(EV_KEY, input_dev->evbit); + + if (keymap_data) { + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + + if (!matrix_keypad_map_key(input_dev, rows, cols, + row_shift, key)) + return -EINVAL; + } + } else { + error = matrix_keypad_parse_of_keymap(keymap_name, rows, cols, + input_dev); + if (error) + return error; + } + + __clear_bit(KEY_RESERVED, input_dev->keybit); + + return 0; +} +EXPORT_SYMBOL(matrix_keypad_build_keymap); diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c index 06517e60e50c..a3735a01e9fd 100644 --- a/drivers/input/misc/cma3000_d0x.c +++ b/drivers/input/misc/cma3000_d0x.c @@ -318,7 +318,7 @@ struct cma3000_accl_data *cma3000_init(struct device *dev, int irq, mutex_init(&data->mutex); data->mode = pdata->mode; - if (data->mode < CMAMODE_DEFAULT || data->mode > CMAMODE_POFF) { + if (data->mode > CMAMODE_POFF) { data->mode = CMAMODE_MOTDET; dev_warn(dev, "Invalid mode specified, assuming Motion Detect\n"); diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c index 5403c571b6a5..306f84c2d8fb 100644 --- a/drivers/input/misc/mpu3050.c +++ b/drivers/input/misc/mpu3050.c @@ -367,7 +367,7 @@ static int __devinit mpu3050_probe(struct i2c_client *client, error = request_threaded_irq(client->irq, NULL, mpu3050_interrupt_thread, - IRQF_TRIGGER_RISING, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "mpu3050", sensor); if (error) { dev_err(&client->dev, diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 14e94f56cb7d..c34f6c0371c4 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -27,6 +27,7 @@ */ #include #include +#include #include #include #include @@ -258,10 +259,13 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); static int __devinit twl6040_vibra_probe(struct platform_device *pdev) { struct twl6040_vibra_data *pdata = pdev->dev.platform_data; + struct device_node *node = pdev->dev.of_node; struct vibra_info *info; + int vddvibl_uV = 0; + int vddvibr_uV = 0; int ret; - if (!pdata) { + if (!pdata && !node) { dev_err(&pdev->dev, "platform_data not available\n"); return -EINVAL; } @@ -273,11 +277,26 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev) } info->dev = &pdev->dev; + info->twl6040 = dev_get_drvdata(pdev->dev.parent); - info->vibldrv_res = pdata->vibldrv_res; - info->vibrdrv_res = pdata->vibrdrv_res; - info->viblmotor_res = pdata->viblmotor_res; - info->vibrmotor_res = pdata->vibrmotor_res; + if (pdata) { + info->vibldrv_res = pdata->vibldrv_res; + info->vibrdrv_res = pdata->vibrdrv_res; + info->viblmotor_res = pdata->viblmotor_res; + info->vibrmotor_res = pdata->vibrmotor_res; + vddvibl_uV = pdata->vddvibl_uV; + vddvibr_uV = pdata->vddvibr_uV; + } else { + of_property_read_u32(node, "vibldrv_res", &info->vibldrv_res); + of_property_read_u32(node, "vibrdrv_res", &info->vibrdrv_res); + of_property_read_u32(node, "viblmotor_res", + &info->viblmotor_res); + of_property_read_u32(node, "vibrmotor_res", + &info->vibrmotor_res); + of_property_read_u32(node, "vddvibl_uV", &vddvibl_uV); + of_property_read_u32(node, "vddvibr_uV", &vddvibr_uV); + } + if ((!info->vibldrv_res && !info->viblmotor_res) || (!info->vibrdrv_res && !info->vibrmotor_res)) { dev_err(info->dev, "invalid vibra driver/motor resistance\n"); @@ -339,10 +358,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev) goto err_regulator; } - if (pdata->vddvibl_uV) { + if (vddvibl_uV) { ret = regulator_set_voltage(info->supplies[0].consumer, - pdata->vddvibl_uV, - pdata->vddvibl_uV); + vddvibl_uV, vddvibl_uV); if (ret) { dev_err(info->dev, "failed to set VDDVIBL volt %d\n", ret); @@ -350,10 +368,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev) } } - if (pdata->vddvibr_uV) { + if (vddvibr_uV) { ret = regulator_set_voltage(info->supplies[1].consumer, - pdata->vddvibr_uV, - pdata->vddvibr_uV); + vddvibr_uV, vddvibr_uV); if (ret) { dev_err(info->dev, "failed to set VDDVIBR volt %d\n", ret); @@ -401,6 +418,12 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id twl6040_vibra_of_match[] = { + {.compatible = "ti,twl6040-vibra", }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl6040_vibra_of_match); + static struct platform_driver twl6040_vibra_driver = { .probe = twl6040_vibra_probe, .remove = __devexit_p(twl6040_vibra_remove), @@ -408,6 +431,7 @@ static struct platform_driver twl6040_vibra_driver = { .name = "twl6040-vibra", .owner = THIS_MODULE, .pm = &twl6040_vibra_pm_ops, + .of_match_table = twl6040_vibra_of_match, }, }; module_platform_driver(twl6040_vibra_driver); diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 9b8db821d5f0..cd6268cf7cd5 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -339,4 +339,16 @@ config MOUSE_SYNAPTICS_USB To compile this driver as a module, choose M here: the module will be called synaptics_usb. +config MOUSE_NAVPOINT_PXA27x + tristate "Synaptics NavPoint (PXA27x SSP/SPI)" + depends on PXA27x && PXA_SSP + help + This driver adds support for the Synaptics NavPoint touchpad connected + to a PXA27x SSP port in SPI slave mode. The device emulates a mouse; + a tap or tap-and-a-half drag gesture emulates the left mouse button. + For example, use the xf86-input-evdev driver for an X pointing device. + + To compile this driver as a module, choose M here: the + module will be called navpoint. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 4718effeb8d9..46ba7556fd4f 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o +obj-$(CONFIG_MOUSE_NAVPOINT_PXA27x) += navpoint.o obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 4c6a72d3d48c..4a1347e91bdc 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -553,10 +553,7 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); - input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); - input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); - input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); - input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); + input_mt_report_finger_count(dev, fingers); input_report_key(dev, BTN_LEFT, left); input_report_key(dev, BTN_RIGHT, right); @@ -604,10 +601,54 @@ static void alps_process_packet_v3(struct psmouse *psmouse) static void alps_process_packet_v4(struct psmouse *psmouse) { + struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; + int offset; int x, y, z; int left, right; + int x1, y1, x2, y2; + int fingers = 0; + unsigned int x_bitmap, y_bitmap; + + /* + * v4 has a 6-byte encoding for bitmap data, but this data is + * broken up between 3 normal packets. Use priv->multi_packet to + * track our position in the bitmap packet. + */ + if (packet[6] & 0x40) { + /* sync, reset position */ + priv->multi_packet = 0; + } + + if (WARN_ON_ONCE(priv->multi_packet > 2)) + return; + + offset = 2 * priv->multi_packet; + priv->multi_data[offset] = packet[6]; + priv->multi_data[offset + 1] = packet[7]; + + if (++priv->multi_packet > 2) { + priv->multi_packet = 0; + + x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) | + ((priv->multi_data[3] & 0x60) << 3) | + ((priv->multi_data[0] & 0x3f) << 2) | + ((priv->multi_data[1] & 0x60) >> 5); + y_bitmap = ((priv->multi_data[5] & 0x01) << 10) | + ((priv->multi_data[3] & 0x1f) << 5) | + (priv->multi_data[1] & 0x1f); + + fingers = alps_process_bitmap(x_bitmap, y_bitmap, + &x1, &y1, &x2, &y2); + + /* Store MT data.*/ + priv->fingers = fingers; + priv->x1 = x1; + priv->x2 = x2; + priv->y1 = y1; + priv->y2 = y2; + } left = packet[4] & 0x01; right = packet[4] & 0x02; @@ -617,21 +658,41 @@ static void alps_process_packet_v4(struct psmouse *psmouse) y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); z = packet[5] & 0x7f; + /* + * If there were no contacts in the bitmap, use ST + * points in MT reports. + * If there were two contacts or more, report MT data. + */ + if (priv->fingers < 2) { + x1 = x; + y1 = y; + fingers = z > 0 ? 1 : 0; + } else { + fingers = priv->fingers; + x1 = priv->x1; + x2 = priv->x2; + y1 = priv->y1; + y2 = priv->y2; + } + if (z >= 64) input_report_key(dev, BTN_TOUCH, 1); else input_report_key(dev, BTN_TOUCH, 0); + alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + + input_mt_report_finger_count(dev, fingers); + + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + if (z > 0) { input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); } input_report_abs(dev, ABS_PRESSURE, z); - input_report_key(dev, BTN_TOOL_FINGER, z > 0); - input_report_key(dev, BTN_LEFT, left); - input_report_key(dev, BTN_RIGHT, right); - input_sync(dev); } @@ -1557,6 +1618,7 @@ int alps_init(struct psmouse *psmouse) input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); break; case ALPS_PROTO_V3: + case ALPS_PROTO_V4: set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); input_mt_init_slots(dev1, 2); input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); @@ -1565,8 +1627,7 @@ int alps_init(struct psmouse *psmouse) set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); set_bit(BTN_TOOL_QUADTAP, dev1->keybit); - /* fall through */ - case ALPS_PROTO_V4: + input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0); input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0); break; diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index a00a4ab92a0f..ae1ac354c778 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -39,6 +39,8 @@ struct alps_data { int prev_fin; /* Finger bit from previous packet */ int multi_packet; /* Multi-packet data in progress */ unsigned char multi_data[6]; /* Saved multi-packet data */ + int x1, x2, y1, y2; /* Coordinates from last MT report */ + int fingers; /* Number of fingers from MT report */ u8 quirks; struct timer_list timer; }; diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c new file mode 100644 index 000000000000..c29ae7654d5e --- /dev/null +++ b/drivers/input/mouse/navpoint.c @@ -0,0 +1,369 @@ +/* + * Synaptics NavPoint (PXA27x SSP/SPI) driver. + * + * Copyright (C) 2012 Paul Parsons + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Synaptics Modular Embedded Protocol: Module Packet Format. + * Module header byte 2:0 = Length (# bytes that follow) + * Module header byte 4:3 = Control + * Module header byte 7:5 = Module Address + */ +#define HEADER_LENGTH(byte) ((byte) & 0x07) +#define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03) +#define HEADER_ADDRESS(byte) ((byte) >> 5) + +struct navpoint { + struct ssp_device *ssp; + struct input_dev *input; + struct device *dev; + int gpio; + int index; + u8 data[1 + HEADER_LENGTH(0xff)]; +}; + +/* + * Initialization values for SSCR0_x, SSCR1_x, SSSR_x. + */ +static const u32 sscr0 = 0 + | SSCR0_TUM /* TIM = 1; No TUR interrupts */ + | SSCR0_RIM /* RIM = 1; No ROR interrupts */ + | SSCR0_SSE /* SSE = 1; SSP enabled */ + | SSCR0_Motorola /* FRF = 0; Motorola SPI */ + | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */ + ; +static const u32 sscr1 = 0 + | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */ + | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */ + | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */ + | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */ + | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */ + | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */ + | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */ + ; +static const u32 sssr = 0 + | SSSR_BCE /* BCE = 1; Clear BCE */ + | SSSR_TUR /* TUR = 1; Clear TUR */ + | SSSR_EOC /* EOC = 1; Clear EOC */ + | SSSR_TINT /* TINT = 1; Clear TINT */ + | SSSR_PINT /* PINT = 1; Clear PINT */ + | SSSR_ROR /* ROR = 1; Clear ROR */ + ; + +/* + * MEP Query $22: Touchpad Coordinate Range Query is not supported by + * the NavPoint module, so sampled values provide the default limits. + */ +#define NAVPOINT_X_MIN 1278 +#define NAVPOINT_X_MAX 5340 +#define NAVPOINT_Y_MIN 1572 +#define NAVPOINT_Y_MAX 4396 +#define NAVPOINT_PRESSURE_MIN 0 +#define NAVPOINT_PRESSURE_MAX 255 + +static void navpoint_packet(struct navpoint *navpoint) +{ + int finger; + int gesture; + int x, y, z; + + switch (navpoint->data[0]) { + case 0xff: /* Garbage (packet?) between reset and Hello packet */ + case 0x00: /* Module 0, NULL packet */ + break; + + case 0x0e: /* Module 0, Absolute packet */ + finger = (navpoint->data[1] & 0x01); + gesture = (navpoint->data[1] & 0x02); + x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3]; + y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5]; + z = navpoint->data[6]; + input_report_key(navpoint->input, BTN_TOUCH, finger); + input_report_abs(navpoint->input, ABS_X, x); + input_report_abs(navpoint->input, ABS_Y, y); + input_report_abs(navpoint->input, ABS_PRESSURE, z); + input_report_key(navpoint->input, BTN_TOOL_FINGER, finger); + input_report_key(navpoint->input, BTN_LEFT, gesture); + input_sync(navpoint->input); + break; + + case 0x19: /* Module 0, Hello packet */ + if ((navpoint->data[1] & 0xf0) == 0x10) + break; + /* FALLTHROUGH */ + default: + dev_warn(navpoint->dev, + "spurious packet: data=0x%02x,0x%02x,...\n", + navpoint->data[0], navpoint->data[1]); + break; + } +} + +static irqreturn_t navpoint_irq(int irq, void *dev_id) +{ + struct navpoint *navpoint = dev_id; + struct ssp_device *ssp = navpoint->ssp; + irqreturn_t ret = IRQ_NONE; + u32 status; + + status = pxa_ssp_read_reg(ssp, SSSR); + if (status & sssr) { + dev_warn(navpoint->dev, + "unexpected interrupt: status=0x%08x\n", status); + pxa_ssp_write_reg(ssp, SSSR, (status & sssr)); + ret = IRQ_HANDLED; + } + + while (status & SSSR_RNE) { + u32 data; + + data = pxa_ssp_read_reg(ssp, SSDR); + navpoint->data[navpoint->index + 0] = (data >> 8); + navpoint->data[navpoint->index + 1] = data; + navpoint->index += 2; + if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) { + navpoint_packet(navpoint); + navpoint->index = 0; + } + status = pxa_ssp_read_reg(ssp, SSSR); + ret = IRQ_HANDLED; + } + + return ret; +} + +static void navpoint_up(struct navpoint *navpoint) +{ + struct ssp_device *ssp = navpoint->ssp; + int timeout; + + clk_prepare_enable(ssp->clk); + + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSSR, sssr); + pxa_ssp_write_reg(ssp, SSTO, 0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */ + + /* Wait until SSP port is ready for slave clock operations */ + for (timeout = 100; timeout != 0; --timeout) { + if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS)) + break; + msleep(1); + } + + if (timeout == 0) + dev_err(navpoint->dev, + "timeout waiting for SSSR[CSS] to clear\n"); + + if (gpio_is_valid(navpoint->gpio)) + gpio_set_value(navpoint->gpio, 1); +} + +static void navpoint_down(struct navpoint *navpoint) +{ + struct ssp_device *ssp = navpoint->ssp; + + if (gpio_is_valid(navpoint->gpio)) + gpio_set_value(navpoint->gpio, 0); + + pxa_ssp_write_reg(ssp, SSCR0, 0); + + clk_disable_unprepare(ssp->clk); +} + +static int navpoint_open(struct input_dev *input) +{ + struct navpoint *navpoint = input_get_drvdata(input); + + navpoint_up(navpoint); + + return 0; +} + +static void navpoint_close(struct input_dev *input) +{ + struct navpoint *navpoint = input_get_drvdata(input); + + navpoint_down(navpoint); +} + +static int __devinit navpoint_probe(struct platform_device *pdev) +{ + const struct navpoint_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct ssp_device *ssp; + struct input_dev *input; + struct navpoint *navpoint; + int error; + + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + + if (gpio_is_valid(pdata->gpio)) { + error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW, + "SYNAPTICS_ON"); + if (error) + return error; + } + + ssp = pxa_ssp_request(pdata->port, pdev->name); + if (!ssp) { + error = -ENODEV; + goto err_free_gpio; + } + + /* HaRET does not disable devices before jumping into Linux */ + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { + pxa_ssp_write_reg(ssp, SSCR0, 0); + dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port); + } + + navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL); + input = input_allocate_device(); + if (!navpoint || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + navpoint->ssp = ssp; + navpoint->input = input; + navpoint->dev = &pdev->dev; + navpoint->gpio = pdata->gpio; + + input->name = pdev->name; + input->dev.parent = &pdev->dev; + + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + + input_set_abs_params(input, ABS_X, + NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0); + input_set_abs_params(input, ABS_Y, + NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, + NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX, + 0, 0); + + input->open = navpoint_open; + input->close = navpoint_close; + + input_set_drvdata(input, navpoint); + + error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint); + if (error) + goto err_free_mem; + + error = input_register_device(input); + if (error) + goto err_free_irq; + + platform_set_drvdata(pdev, navpoint); + dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq); + + return 0; + +err_free_irq: + free_irq(ssp->irq, &pdev->dev); +err_free_mem: + input_free_device(input); + kfree(navpoint); + pxa_ssp_free(ssp); +err_free_gpio: + if (gpio_is_valid(pdata->gpio)) + gpio_free(pdata->gpio); + + return error; +} + +static int __devexit navpoint_remove(struct platform_device *pdev) +{ + const struct navpoint_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct ssp_device *ssp = navpoint->ssp; + + free_irq(ssp->irq, navpoint); + + input_unregister_device(navpoint->input); + kfree(navpoint); + + pxa_ssp_free(ssp); + + if (gpio_is_valid(pdata->gpio)) + gpio_free(pdata->gpio); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int navpoint_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct input_dev *input = navpoint->input; + + mutex_lock(&input->mutex); + if (input->users) + navpoint_down(navpoint); + mutex_unlock(&input->mutex); + + return 0; +} + +static int navpoint_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct navpoint *navpoint = platform_get_drvdata(pdev); + struct input_dev *input = navpoint->input; + + mutex_lock(&input->mutex); + if (input->users) + navpoint_up(navpoint); + mutex_unlock(&input->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume); + +static struct platform_driver navpoint_driver = { + .probe = navpoint_probe, + .remove = __devexit_p(navpoint_remove), + .driver = { + .name = "navpoint", + .owner = THIS_MODULE, + .pm = &navpoint_pm_ops, + }, +}; + +module_platform_driver(navpoint_driver); + +MODULE_AUTHOR("Paul Parsons "); +MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:navpoint"); diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 661a0ca3b3d6..3f5649f19082 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -41,7 +41,7 @@ #define GET_ABS_Y(packet) ((packet[2] << 2) | (packet[3] & 0x03)) /** Driver version. */ -static const char fsp_drv_ver[] = "1.0.0-K"; +static const char fsp_drv_ver[] = "1.1.0-K"; /* * Make sure that the value being sent to FSP will not conflict with @@ -303,6 +303,27 @@ static int fsp_get_revision(struct psmouse *psmouse, int *rev) return 0; } +static int fsp_get_sn(struct psmouse *psmouse, int *sn) +{ + int v0, v1, v2; + int rc = -EIO; + + /* production number since Cx is available at: 0x0b40 ~ 0x0b42 */ + if (fsp_page_reg_write(psmouse, FSP_PAGE_0B)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN0, &v0)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN1, &v1)) + goto out; + if (fsp_reg_read(psmouse, FSP_REG_SN2, &v2)) + goto out; + *sn = (v0 << 16) | (v1 << 8) | v2; + rc = 0; +out: + fsp_page_reg_write(psmouse, FSP_PAGE_DEFAULT); + return rc; +} + static int fsp_get_buttons(struct psmouse *psmouse, int *btn) { static const int buttons[] = { @@ -1000,16 +1021,21 @@ static int fsp_reconnect(struct psmouse *psmouse) int fsp_init(struct psmouse *psmouse) { struct fsp_data *priv; - int ver, rev; + int ver, rev, sn = 0; int error; if (fsp_get_version(psmouse, &ver) || fsp_get_revision(psmouse, &rev)) { return -ENODEV; } + if (ver >= FSP_VER_STL3888_C0) { + /* firmware information is only available since C0 */ + fsp_get_sn(psmouse, &sn); + } - psmouse_info(psmouse, "Finger Sensing Pad, hw: %d.%d.%d, sw: %s\n", - ver >> 4, ver & 0x0F, rev, fsp_drv_ver); + psmouse_info(psmouse, + "Finger Sensing Pad, hw: %d.%d.%d, sn: %x, sw: %s\n", + ver >> 4, ver & 0x0F, rev, sn, fsp_drv_ver); psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL); if (!priv) diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index 334de19e5ddb..aa697ece405b 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -65,6 +65,14 @@ #define FSP_BIT_SWC1_GST_GRP1 BIT(6) #define FSP_BIT_SWC1_BX_COMPAT BIT(7) +#define FSP_PAGE_0B (0x0b) +#define FSP_PAGE_82 (0x82) +#define FSP_PAGE_DEFAULT FSP_PAGE_82 + +#define FSP_REG_SN0 (0x40) +#define FSP_REG_SN1 (0x41) +#define FSP_REG_SN2 (0x42) + /* Finger-sensing Pad packet formating related definitions */ /* absolute packet type */ diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c index 17ff137b9bd5..d5928fd0c914 100644 --- a/drivers/input/mouse/sermouse.c +++ b/drivers/input/mouse/sermouse.c @@ -355,15 +355,4 @@ static struct serio_driver sermouse_drv = { .disconnect = sermouse_disconnect, }; -static int __init sermouse_init(void) -{ - return serio_register_driver(&sermouse_drv); -} - -static void __exit sermouse_exit(void) -{ - serio_unregister_driver(&sermouse_drv); -} - -module_init(sermouse_init); -module_exit(sermouse_exit); +module_serio_driver(sermouse_drv); diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index a4b14a41cbf4..c703d53be3a0 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -45,16 +45,6 @@ #define YMIN_NOMINAL 1408 #define YMAX_NOMINAL 4448 -/* - * Synaptics touchpads report the y coordinate from bottom to top, which is - * opposite from what userspace expects. - * This function is used to invert y before reporting. - */ -static int synaptics_invert_y(int y) -{ - return YMAX_NOMINAL + YMIN_NOMINAL - y; -} - /***************************************************************************** * Stuff we need even when we do not want native Synaptics support @@ -111,6 +101,16 @@ void synaptics_reset(struct psmouse *psmouse) * Synaptics communications functions ****************************************************************************/ +/* + * Synaptics touchpads report the y coordinate from bottom to top, which is + * opposite from what userspace expects. + * This function is used to invert y before reporting. + */ +static int synaptics_invert_y(int y) +{ + return YMAX_NOMINAL + YMIN_NOMINAL - y; +} + /* * Send a command to the synpatics touchpad by special commands */ diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index eb9a3cfbeefa..e900d465aaf6 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -548,16 +548,4 @@ static struct serio_driver vsxxxaa_drv = { .disconnect = vsxxxaa_disconnect, }; -static int __init vsxxxaa_init(void) -{ - return serio_register_driver(&vsxxxaa_drv); -} - -static void __exit vsxxxaa_exit(void) -{ - serio_unregister_driver(&vsxxxaa_drv); -} - -module_init(vsxxxaa_init); -module_exit(vsxxxaa_exit); - +module_serio_driver(vsxxxaa_drv); diff --git a/drivers/input/of_keymap.c b/drivers/input/of_keymap.c deleted file mode 100644 index 061493d57682..000000000000 --- a/drivers/input/of_keymap.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Helpers for open firmware matrix keyboard bindings - * - * Copyright (C) 2012 Google, Inc - * - * Author: - * Olof Johansson - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -struct matrix_keymap_data * -matrix_keyboard_of_fill_keymap(struct device_node *np, - const char *propname) -{ - struct matrix_keymap_data *kd; - u32 *keymap; - int proplen, i; - const __be32 *prop; - - if (!np) - return NULL; - - if (!propname) - propname = "linux,keymap"; - - prop = of_get_property(np, propname, &proplen); - if (!prop) - return NULL; - - if (proplen % sizeof(u32)) { - pr_warn("Malformed keymap property %s in %s\n", - propname, np->full_name); - return NULL; - } - - kd = kzalloc(sizeof(*kd), GFP_KERNEL); - if (!kd) - return NULL; - - kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL); - if (!kd->keymap) { - kfree(kd); - return NULL; - } - - kd->keymap_size = proplen / sizeof(u32); - - for (i = 0; i < kd->keymap_size; i++) { - u32 tmp = be32_to_cpup(prop + i); - int key_code, row, col; - - row = (tmp >> 24) & 0xff; - col = (tmp >> 16) & 0xff; - key_code = tmp & 0xffff; - keymap[i] = KEY(row, col, key_code); - } - - return kd; -} -EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap); - -void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) -{ - if (kd) { - kfree(kd->keymap); - kfree(kd); - } -} -EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap); diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c index 43494742541c..0c42497aaaf4 100644 --- a/drivers/input/serio/pcips2.c +++ b/drivers/input/serio/pcips2.c @@ -206,6 +206,7 @@ static const struct pci_device_id pcips2_ids[] = { }, { 0, } }; +MODULE_DEVICE_TABLE(pci, pcips2_ids); static struct pci_driver pcips2_driver = { .name = "pcips2", @@ -214,20 +215,8 @@ static struct pci_driver pcips2_driver = { .remove = __devexit_p(pcips2_remove), }; -static int __init pcips2_init(void) -{ - return pci_register_driver(&pcips2_driver); -} - -static void __exit pcips2_exit(void) -{ - pci_unregister_driver(&pcips2_driver); -} - -module_init(pcips2_init); -module_exit(pcips2_exit); +module_pci_driver(pcips2_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Russell King "); MODULE_DESCRIPTION("PCI PS/2 keyboard/mouse driver"); -MODULE_DEVICE_TABLE(pci, pcips2_ids); diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c index 15aa81c9f1fb..a76fb64f03db 100644 --- a/drivers/input/serio/ps2mult.c +++ b/drivers/input/serio/ps2mult.c @@ -304,15 +304,4 @@ static struct serio_driver ps2mult_drv = { .reconnect = ps2mult_reconnect, }; -static int __init ps2mult_init(void) -{ - return serio_register_driver(&ps2mult_drv); -} - -static void __exit ps2mult_exit(void) -{ - serio_unregister_driver(&ps2mult_drv); -} - -module_init(ps2mult_init); -module_exit(ps2mult_exit); +module_serio_driver(ps2mult_drv); diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 4494233d331a..59df2e7317a3 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -165,31 +165,38 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, struct serio_raw *serio_raw = client->serio_raw; char uninitialized_var(c); ssize_t read = 0; - int retval; + int error; - if (serio_raw->dead) - return -ENODEV; + for (;;) { + if (serio_raw->dead) + return -ENODEV; - if (serio_raw->head == serio_raw->tail && (file->f_flags & O_NONBLOCK)) - return -EAGAIN; + if (serio_raw->head == serio_raw->tail && + (file->f_flags & O_NONBLOCK)) + return -EAGAIN; - retval = wait_event_interruptible(serio_raw->wait, - serio_raw->head != serio_raw->tail || serio_raw->dead); - if (retval) - return retval; - - if (serio_raw->dead) - return -ENODEV; - - while (read < count && serio_raw_fetch_byte(serio_raw, &c)) { - if (put_user(c, buffer++)) { - retval = -EFAULT; + if (count == 0) break; + + while (read < count && serio_raw_fetch_byte(serio_raw, &c)) { + if (put_user(c, buffer++)) + return -EFAULT; + read++; + } + + if (read) + break; + + if (!(file->f_flags & O_NONBLOCK)) { + error = wait_event_interruptible(serio_raw->wait, + serio_raw->head != serio_raw->tail || + serio_raw->dead); + if (error) + return error; } - read++; } - return read ?: retval; + return read; } static ssize_t serio_raw_write(struct file *file, const char __user *buffer, @@ -197,8 +204,7 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer, { struct serio_raw_client *client = file->private_data; struct serio_raw *serio_raw = client->serio_raw; - ssize_t written = 0; - int retval; + int retval = 0; unsigned char c; retval = mutex_lock_interruptible(&serio_raw_mutex); @@ -218,16 +224,20 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer, retval = -EFAULT; goto out; } + if (serio_write(serio_raw->serio, c)) { - retval = -EIO; + /* Either signal error or partial write */ + if (retval == 0) + retval = -EIO; goto out; } - written++; + + retval++; } out: mutex_unlock(&serio_raw_mutex); - return written ?: retval; + return retval; } static unsigned int serio_raw_poll(struct file *file, poll_table *wait) @@ -432,15 +442,4 @@ static struct serio_driver serio_raw_drv = { .manual_bind = true, }; -static int __init serio_raw_init(void) -{ - return serio_register_driver(&serio_raw_drv); -} - -static void __exit serio_raw_exit(void) -{ - serio_unregister_driver(&serio_raw_drv); -} - -module_init(serio_raw_init); -module_exit(serio_raw_exit); +module_serio_driver(serio_raw_drv); diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c index d96d4c2a76a9..1e983bec7d86 100644 --- a/drivers/input/serio/xilinx_ps2.c +++ b/drivers/input/serio/xilinx_ps2.c @@ -73,7 +73,8 @@ struct xps2data { spinlock_t lock; void __iomem *base_address; /* virt. address of control registers */ unsigned int flags; - struct serio serio; /* serio */ + struct serio *serio; /* serio */ + struct device *dev; }; /************************************/ @@ -119,7 +120,7 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id) /* Check which interrupt is active */ if (intr_sr & XPS2_IPIXR_RX_OVF) - dev_warn(drvdata->serio.dev.parent, "receive overrun error\n"); + dev_warn(drvdata->dev, "receive overrun error\n"); if (intr_sr & XPS2_IPIXR_RX_ERR) drvdata->flags |= SERIO_PARITY; @@ -132,10 +133,10 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id) /* Error, if a byte is not received */ if (status) { - dev_err(drvdata->serio.dev.parent, + dev_err(drvdata->dev, "wrong rcvd byte count (%d)\n", status); } else { - serio_interrupt(&drvdata->serio, c, drvdata->flags); + serio_interrupt(drvdata->serio, c, drvdata->flags); drvdata->flags = 0; } } @@ -193,7 +194,7 @@ static int sxps2_open(struct serio *pserio) error = request_irq(drvdata->irq, &xps2_interrupt, 0, DRIVER_NAME, drvdata); if (error) { - dev_err(drvdata->serio.dev.parent, + dev_err(drvdata->dev, "Couldn't allocate interrupt %d\n", drvdata->irq); return error; } @@ -259,15 +260,16 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev) } drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL); - if (!drvdata) { - dev_err(dev, "Couldn't allocate device private record\n"); - return -ENOMEM; + serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!drvdata || !serio) { + error = -ENOMEM; + goto failed1; } - dev_set_drvdata(dev, drvdata); - spin_lock_init(&drvdata->lock); drvdata->irq = r_irq.start; + drvdata->serio = serio; + drvdata->dev = dev; phys_addr = r_mem.start; remap_size = resource_size(&r_mem); @@ -298,7 +300,6 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev) (unsigned long long)phys_addr, drvdata->base_address, drvdata->irq); - serio = &drvdata->serio; serio->id.type = SERIO_8042; serio->write = sxps2_write; serio->open = sxps2_open; @@ -312,13 +313,14 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev) serio_register_port(serio); + platform_set_drvdata(ofdev, drvdata); return 0; /* success */ failed2: release_mem_region(phys_addr, remap_size); failed1: + kfree(serio); kfree(drvdata); - dev_set_drvdata(dev, NULL); return error; } @@ -333,22 +335,21 @@ failed1: */ static int __devexit xps2_of_remove(struct platform_device *of_dev) { - struct device *dev = &of_dev->dev; - struct xps2data *drvdata = dev_get_drvdata(dev); + struct xps2data *drvdata = platform_get_drvdata(of_dev); struct resource r_mem; /* IO mem resources */ - serio_unregister_port(&drvdata->serio); + serio_unregister_port(drvdata->serio); iounmap(drvdata->base_address); /* Get iospace of the device */ if (of_address_to_resource(of_dev->dev.of_node, 0, &r_mem)) - dev_err(dev, "invalid address\n"); + dev_err(drvdata->dev, "invalid address\n"); else release_mem_region(r_mem.start, resource_size(&r_mem)); kfree(drvdata); - dev_set_drvdata(dev, NULL); + platform_set_drvdata(of_dev, NULL); return 0; } diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 755a39e4c9e9..ee83c3904ee8 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -1862,7 +1862,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) if (i == ARRAY_SIZE(speeds)) { dev_info(&intf->dev, "Aiptek tried all speeds, no sane response\n"); - goto fail2; + goto fail3; } /* Associate this driver's struct with the usb interface. diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index b4842d0e61dd..b79d45198d82 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -135,6 +135,6 @@ extern const struct usb_device_id wacom_ids[]; void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); void wacom_setup_device_quirks(struct wacom_features *features); -void wacom_setup_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac); +int wacom_setup_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac); #endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 79a0509882d4..cad5602d3ce4 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -28,6 +28,7 @@ #define HID_USAGE_Y_TILT 0x3e #define HID_USAGE_FINGER 0x22 #define HID_USAGE_STYLUS 0x20 +#define HID_USAGE_CONTACTMAX 0x55 #define HID_COLLECTION 0xa1 #define HID_COLLECTION_LOGICAL 0x02 #define HID_COLLECTION_END 0xc0 @@ -204,6 +205,27 @@ static int wacom_parse_logical_collection(unsigned char *report, return length; } +static void wacom_retrieve_report_data(struct usb_interface *intf, + struct wacom_features *features) +{ + int result = 0; + unsigned char *rep_data; + + rep_data = kmalloc(2, GFP_KERNEL); + if (rep_data) { + + rep_data[0] = 12; + result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT, + rep_data[0], &rep_data, 2, + WAC_MSG_RETRIES); + + if (result >= 0 && rep_data[1] > 2) + features->touch_max = rep_data[1]; + + kfree(rep_data); + } +} + /* * Interface Descriptor of wacom devices can be incomplete and * inconsistent so wacom_features table is used to store stylus @@ -236,6 +258,9 @@ static int wacom_parse_logical_collection(unsigned char *report, * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical * Collection. Instead they define a Logical Collection with a single * Logical Maximum for both X and Y. + * + * Intuos5 touch interface does not contain useful data. We deal with + * this after returning from this function. */ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, @@ -295,6 +320,10 @@ static int wacom_parse_hid(struct usb_interface *intf, /* need to reset back */ features->pktlen = WACOM_PKGLEN_TPC2FG; } + + if (features->type == MTSCREEN) + features->pktlen = WACOM_PKGLEN_MTOUCH; + if (features->type == BAMBOO_PT) { /* need to reset back */ features->pktlen = WACOM_PKGLEN_BBTOUCH; @@ -327,18 +356,15 @@ static int wacom_parse_hid(struct usb_interface *intf, case HID_USAGE_Y: if (usage == WCM_DESKTOP) { if (finger) { - features->device_type = BTN_TOOL_FINGER; - if (features->type == TABLETPC2FG) { - /* need to reset back */ - features->pktlen = WACOM_PKGLEN_TPC2FG; + int type = features->type; + + if (type == TABLETPC2FG || type == MTSCREEN) { features->y_max = get_unaligned_le16(&report[i + 3]); features->y_phy = get_unaligned_le16(&report[i + 6]); i += 7; - } else if (features->type == BAMBOO_PT) { - /* need to reset back */ - features->pktlen = WACOM_PKGLEN_BBTOUCH; + } else if (type == BAMBOO_PT) { features->y_phy = get_unaligned_le16(&report[i + 3]); features->y_max = @@ -352,10 +378,6 @@ static int wacom_parse_hid(struct usb_interface *intf, i += 4; } } else if (pen) { - /* penabled only accepts exact bytes of data */ - if (features->type == TABLETPC2FG) - features->pktlen = WACOM_PKGLEN_GRAPHIRE; - features->device_type = BTN_TOOL_PEN; features->y_max = get_unaligned_le16(&report[i + 3]); i += 4; @@ -377,6 +399,11 @@ static int wacom_parse_hid(struct usb_interface *intf, pen = 1; i++; break; + + case HID_USAGE_CONTACTMAX: + wacom_retrieve_report_data(intf, features); + i++; + break; } break; @@ -413,22 +440,29 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat if (!rep_data) return error; - /* ask to report tablet data if it is MT Tablet PC or - * not a Tablet PC */ - if (features->type == TABLETPC2FG) { - do { - rep_data[0] = 3; - rep_data[1] = 4; - rep_data[2] = 0; - rep_data[3] = 0; - report_id = 3; - error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT, - report_id, rep_data, 4, 1); - if (error >= 0) - error = wacom_get_report(intf, - WAC_HID_FEATURE_REPORT, - report_id, rep_data, 4, 1); - } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES); + /* ask to report Wacom data */ + if (features->device_type == BTN_TOOL_FINGER) { + /* if it is an MT Tablet PC touch */ + if (features->type == TABLETPC2FG || + features->type == MTSCREEN) { + do { + rep_data[0] = 3; + rep_data[1] = 4; + rep_data[2] = 0; + rep_data[3] = 0; + report_id = 3; + error = wacom_set_report(intf, + WAC_HID_FEATURE_REPORT, + report_id, + rep_data, 4, 1); + if (error >= 0) + error = wacom_get_report(intf, + WAC_HID_FEATURE_REPORT, + report_id, + rep_data, 4, 1); + } while ((error < 0 || rep_data[1] != 4) && + limit++ < WAC_MSG_RETRIES); + } } else if (features->type != TABLETPC && features->type != WIRELESS && features->device_type == BTN_TOOL_PEN) { @@ -450,7 +484,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat } static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, - struct wacom_features *features) + struct wacom_features *features) { int error = 0; struct usb_host_interface *interface = intf->cur_altsetting; @@ -478,16 +512,21 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, } } - /* only Tablet PCs and Bamboo P&T need to retrieve the info */ - if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) && - (features->type != BAMBOO_PT)) + /* only devices that support touch need to retrieve the info */ + if (features->type != TABLETPC && + features->type != TABLETPC2FG && + features->type != BAMBOO_PT && + features->type != MTSCREEN) { goto out; + } - if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { - if (usb_get_extra_descriptor(&interface->endpoint[0], - HID_DEVICET_REPORT, &hid_desc)) { - printk("wacom: can not retrieve extra class descriptor\n"); - error = 1; + error = usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc); + if (error) { + error = usb_get_extra_descriptor(&interface->endpoint[0], + HID_DEVICET_REPORT, &hid_desc); + if (error) { + dev_err(&intf->dev, + "can not retrieve extra class descriptor\n"); goto out; } } @@ -577,23 +616,39 @@ static void wacom_remove_shared_data(struct wacom_wac *wacom) static int wacom_led_control(struct wacom *wacom) { unsigned char *buf; - int retval, led = 0; + int retval; buf = kzalloc(9, GFP_KERNEL); if (!buf) return -ENOMEM; - if (wacom->wacom_wac.features.type == WACOM_21UX2 || - wacom->wacom_wac.features.type == WACOM_24HD) - led = (wacom->led.select[1] << 4) | 0x40; + if (wacom->wacom_wac.features.type >= INTUOS5S && + wacom->wacom_wac.features.type <= INTUOS5L) { + /* + * Touch Ring and crop mark LED luminance may take on + * one of four values: + * 0 = Low; 1 = Medium; 2 = High; 3 = Off + */ + int ring_led = wacom->led.select[0] & 0x03; + int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03; + int crop_lum = 0; - led |= wacom->led.select[0] | 0x4; + buf[0] = WAC_CMD_LED_CONTROL; + buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led); + } + else { + int led = wacom->led.select[0] | 0x4; - buf[0] = WAC_CMD_LED_CONTROL; - buf[1] = led; - buf[2] = wacom->led.llv; - buf[3] = wacom->led.hlv; - buf[4] = wacom->led.img_lum; + if (wacom->wacom_wac.features.type == WACOM_21UX2 || + wacom->wacom_wac.features.type == WACOM_24HD) + led |= (wacom->led.select[1] << 4) | 0x40; + + buf[0] = WAC_CMD_LED_CONTROL; + buf[1] = led; + buf[2] = wacom->led.llv; + buf[3] = wacom->led.hlv; + buf[4] = wacom->led.img_lum; + } retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL, buf, 9, WAC_CMD_RETRIES); @@ -786,6 +841,17 @@ static struct attribute_group intuos4_led_attr_group = { .attrs = intuos4_led_attrs, }; +static struct attribute *intuos5_led_attrs[] = { + &dev_attr_status0_luminance.attr, + &dev_attr_status_led0_select.attr, + NULL +}; + +static struct attribute_group intuos5_led_attr_group = { + .name = "wacom_led", + .attrs = intuos5_led_attrs, +}; + static int wacom_initialize_leds(struct wacom *wacom) { int error; @@ -815,6 +881,19 @@ static int wacom_initialize_leds(struct wacom *wacom) &cintiq_led_attr_group); break; + case INTUOS5S: + case INTUOS5: + case INTUOS5L: + wacom->led.select[0] = 0; + wacom->led.select[1] = 0; + wacom->led.llv = 32; + wacom->led.hlv = 0; + wacom->led.img_lum = 0; + + error = sysfs_create_group(&wacom->intf->dev.kobj, + &intuos5_led_attr_group); + break; + default: return 0; } @@ -843,6 +922,13 @@ static void wacom_destroy_leds(struct wacom *wacom) sysfs_remove_group(&wacom->intf->dev.kobj, &cintiq_led_attr_group); break; + + case INTUOS5S: + case INTUOS5: + case INTUOS5L: + sysfs_remove_group(&wacom->intf->dev.kobj, + &intuos5_led_attr_group); + break; } } @@ -904,8 +990,10 @@ static int wacom_register_input(struct wacom *wacom) int error; input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; + if (!input_dev) { + error = -ENOMEM; + goto fail1; + } input_dev->name = wacom_wac->name; input_dev->dev.parent = &intf->dev; @@ -915,14 +1003,20 @@ static int wacom_register_input(struct wacom *wacom) input_set_drvdata(input_dev, wacom); wacom_wac->input = input_dev; - wacom_setup_input_capabilities(input_dev, wacom_wac); + error = wacom_setup_input_capabilities(input_dev, wacom_wac); + if (error) + goto fail1; error = input_register_device(input_dev); - if (error) { - input_free_device(input_dev); - wacom_wac->input = NULL; - } + if (error) + goto fail2; + return 0; + +fail2: + input_free_device(input_dev); + wacom_wac->input = NULL; +fail1: return error; } @@ -941,22 +1035,22 @@ static void wacom_wireless_work(struct work_struct *work) wacom = usb_get_intfdata(usbdev->config->interface[1]); if (wacom->wacom_wac.input) input_unregister_device(wacom->wacom_wac.input); - wacom->wacom_wac.input = 0; + wacom->wacom_wac.input = NULL; /* Touch interface */ wacom = usb_get_intfdata(usbdev->config->interface[2]); if (wacom->wacom_wac.input) input_unregister_device(wacom->wacom_wac.input); - wacom->wacom_wac.input = 0; + wacom->wacom_wac.input = NULL; if (wacom_wac->pid == 0) { - printk(KERN_INFO "wacom: wireless tablet disconnected\n"); + dev_info(&wacom->intf->dev, "wireless tablet disconnected\n"); } else { const struct usb_device_id *id = wacom_ids; - printk(KERN_INFO - "wacom: wireless tablet connected with PID %x\n", - wacom_wac->pid); + dev_info(&wacom->intf->dev, + "wireless tablet connected with PID %x\n", + wacom_wac->pid); while (id->match_flags) { if (id->idVendor == USB_VENDOR_ID_WACOM && @@ -966,8 +1060,8 @@ static void wacom_wireless_work(struct work_struct *work) } if (!id->match_flags) { - printk(KERN_INFO - "wacom: ignorning unknown PID.\n"); + dev_info(&wacom->intf->dev, + "ignoring unknown PID.\n"); return; } @@ -1038,11 +1132,33 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i endpoint = &intf->cur_altsetting->endpoint[0].desc; - /* Retrieve the physical and logical size for OEM devices */ + /* Retrieve the physical and logical size for touch devices */ error = wacom_retrieve_hid_descriptor(intf, features); if (error) goto fail3; + /* + * Intuos5 has no useful data about its touch interface in its + * HID descriptor. If this is the touch interface (wMaxPacketSize + * of WACOM_PKGLEN_BBTOUCH3), override the table values. + */ + if (features->type >= INTUOS5S && features->type <= INTUOS5L) { + if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) { + features->device_type = BTN_TOOL_FINGER; + features->pktlen = WACOM_PKGLEN_BBTOUCH3; + + features->x_phy = + (features->x_max * 100) / features->x_resolution; + features->y_phy = + (features->y_max * 100) / features->y_resolution; + + features->x_max = 4096; + features->y_max = 4096; + } else { + features->device_type = BTN_TOOL_PEN; + } + } + wacom_setup_device_quirks(features); strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index b327790e9a0c..004bc1bb1544 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -61,7 +61,8 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom) break; default: - printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]); + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); return 0; } @@ -76,8 +77,8 @@ static int wacom_pl_irq(struct wacom_wac *wacom) int prox, pressure; if (data[0] != WACOM_REPORT_PENABLED) { - dev_dbg(&input->dev, - "wacom_pl_irq: received unknown report #%d\n", data[0]); + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); return 0; } @@ -147,7 +148,8 @@ static int wacom_ptu_irq(struct wacom_wac *wacom) struct input_dev *input = wacom->input; if (data[0] != WACOM_REPORT_PENABLED) { - printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]); + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); return 0; } @@ -176,7 +178,8 @@ static int wacom_dtu_irq(struct wacom_wac *wacom) struct input_dev *input = wacom->input; int prox = data[1] & 0x20, pressure; - dev_dbg(&input->dev, "wacom_dtu_irq: received report #%d\n", data[0]); + dev_dbg(input->dev.parent, + "%s: received report #%d", __func__, data[0]); if (prox) { /* Going into proximity select tool */ @@ -212,9 +215,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) int retval = 0; if (data[0] != WACOM_REPORT_PENABLED) { - dev_dbg(&input->dev, - "wacom_graphire_irq: received unknown report #%d\n", - data[0]); + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); goto exit; } @@ -324,6 +326,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) /* Enter report */ if ((data[1] & 0xfc) == 0xc0) { + if (features->type >= INTUOS5S && features->type <= INTUOS5L) + wacom->shared->stylus_in_proximity = true; + /* serial number of the tool */ wacom->serial[idx] = ((data[3] & 0x0f) << 28) + (data[4] << 20) + (data[5] << 12) + @@ -409,6 +414,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom) /* Exit report */ if ((data[1] & 0xfe) == 0x80) { + if (features->type >= INTUOS5S && features->type <= INTUOS5L) + wacom->shared->stylus_in_proximity = false; + /* * Reset all states otherwise we lose the initial states * when in-prox next time @@ -455,6 +463,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom) if ((data[1] & 0xb8) == 0xa0) { t = (data[6] << 2) | ((data[7] >> 6) & 3); if ((features->type >= INTUOS4S && features->type <= INTUOS4L) || + (features->type >= INTUOS5S && features->type <= INTUOS5L) || features->type == WACOM_21UX2 || features->type == WACOM_24HD) { t = (t << 1) | (data[1] & 1); } @@ -485,11 +494,13 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) unsigned int t; int idx = 0, result; - if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD - && data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) { - dev_dbg(&input->dev, - "wacom_intuos_irq: received unknown report #%d\n", - data[0]); + if (data[0] != WACOM_REPORT_PENABLED && + data[0] != WACOM_REPORT_INTUOSREAD && + data[0] != WACOM_REPORT_INTUOSWRITE && + data[0] != WACOM_REPORT_INTUOSPAD && + data[0] != WACOM_REPORT_INTUOS5PAD) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, data[0]); return 0; } @@ -498,7 +509,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) idx = data[1] & 0x01; /* pad packets. Works as a second tool and is always in prox */ - if (data[0] == WACOM_REPORT_INTUOSPAD) { + if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) { if (features->type >= INTUOS4S && features->type <= INTUOS4L) { input_report_key(input, BTN_0, (data[2] & 0x01)); input_report_key(input, BTN_1, (data[3] & 0x01)); @@ -574,6 +585,34 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } + } else if (features->type >= INTUOS5S && features->type <= INTUOS5L) { + int i; + + /* Touch ring mode switch has no capacitive sensor */ + input_report_key(input, BTN_0, (data[3] & 0x01)); + + /* + * ExpressKeys on Intuos5 have a capacitive sensor in + * addition to the mechanical switch. Switch data is + * stored in data[4], capacitive data in data[5]. + */ + for (i = 0; i < 8; i++) + input_report_key(input, BTN_1 + i, data[4] & (1 << i)); + + if (data[2] & 0x80) { + input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f)); + } else { + /* Out of proximity, clear wheel value. */ + input_report_abs(input, ABS_WHEEL, 0); + } + + if (data[2] | (data[3] & 0x01) | data[4]) { + input_report_key(input, wacom->tool[1], 1); + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_key(input, wacom->tool[1], 0); + input_report_abs(input, ABS_MISC, 0); + } } else { if (features->type == WACOM_21UX2) { input_report_key(input, BTN_0, (data[5] & 0x01)); @@ -637,7 +676,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) (features->type == INTUOS3 || features->type == INTUOS3S || features->type == INTUOS4 || - features->type == INTUOS4S)) { + features->type == INTUOS4S || + features->type == INTUOS5 || + features->type == INTUOS5S)) { return 0; } @@ -690,7 +731,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { /* I4 mouse */ - if (features->type >= INTUOS4S && features->type <= INTUOS4L) { + if ((features->type >= INTUOS4S && features->type <= INTUOS4L) || + (features->type >= INTUOS5S && features->type <= INTUOS5L)) { input_report_key(input, BTN_LEFT, data[6] & 0x01); input_report_key(input, BTN_MIDDLE, data[6] & 0x02); input_report_key(input, BTN_RIGHT, data[6] & 0x04); @@ -717,7 +759,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) } } } else if ((features->type < INTUOS3S || features->type == INTUOS3L || - features->type == INTUOS4L) && + features->type == INTUOS4L || features->type == INTUOS5L) && wacom->tool[idx] == BTN_TOOL_LENS) { /* Lens cursor packets */ input_report_key(input, BTN_LEFT, data[8] & 0x01); @@ -734,6 +776,72 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) return 1; } +static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid) +{ + int touch_max = wacom->features.touch_max; + int i; + + if (!wacom->slots) + return -1; + + for (i = 0; i < touch_max; ++i) { + if (wacom->slots[i] == contactid) + return i; + } + for (i = 0; i < touch_max; ++i) { + if (wacom->slots[i] == -1) + return i; + } + return -1; +} + +static int wacom_mt_touch(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + char *data = wacom->data; + int i; + int current_num_contacts = data[2]; + int contacts_to_send = 0; + + /* + * First packet resets the counter since only the first + * packet in series will have non-zero current_num_contacts. + */ + if (current_num_contacts) + wacom->num_contacts_left = current_num_contacts; + + /* There are at most 5 contacts per packet */ + contacts_to_send = min(5, wacom->num_contacts_left); + + for (i = 0; i < contacts_to_send; i++) { + int offset = (WACOM_BYTES_PER_MT_PACKET * i) + 3; + bool touch = data[offset] & 0x1; + int id = le16_to_cpup((__le16 *)&data[offset + 1]); + int slot = find_slot_from_contactid(wacom, id); + + if (slot < 0) + continue; + + input_mt_slot(input, slot); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + int x = le16_to_cpup((__le16 *)&data[offset + 7]); + int y = le16_to_cpup((__le16 *)&data[offset + 9]); + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + } + wacom->slots[slot] = touch ? id : -1; + } + + input_mt_report_pointer_emulation(input, true); + + wacom->num_contacts_left -= contacts_to_send; + if (wacom->num_contacts_left < 0) + wacom->num_contacts_left = 0; + + return 1; +} + static int wacom_tpc_mt_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; @@ -772,6 +880,9 @@ static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len) bool prox; int x = 0, y = 0; + if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG) + return 0; + if (!wacom->shared->stylus_in_proximity) { if (len == WACOM_PKGLEN_TPC1FG) { prox = data[0] & 0x01; @@ -835,15 +946,15 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) { char *data = wacom->data; - dev_dbg(&wacom->input->dev, "wacom_tpc_irq: received report #%d\n", - data[0]); + dev_dbg(wacom->input->dev.parent, + "%s: received report #%d\n", __func__, data[0]); switch (len) { case WACOM_PKGLEN_TPC1FG: - return wacom_tpc_single_touch(wacom, len); + return wacom_tpc_single_touch(wacom, len); case WACOM_PKGLEN_TPC2FG: - return wacom_tpc_mt_touch(wacom); + return wacom_tpc_mt_touch(wacom); default: switch (data[0]) { @@ -852,6 +963,9 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) case WACOM_REPORT_TPCST: return wacom_tpc_single_touch(wacom, len); + case WACOM_REPORT_TPCMT: + return wacom_mt_touch(wacom); + case WACOM_REPORT_PENABLED: return wacom_tpc_pen(wacom); } @@ -1120,8 +1234,18 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) sync = wacom_intuos_irq(wacom_wac); break; + case INTUOS5S: + case INTUOS5: + case INTUOS5L: + if (len == WACOM_PKGLEN_BBTOUCH3) + sync = wacom_bpt3_touch(wacom_wac); + else + sync = wacom_intuos_irq(wacom_wac); + break; + case TABLETPC: case TABLETPC2FG: + case MTSCREEN: sync = wacom_tpc_irq(wacom_wac, len); break; @@ -1194,7 +1318,9 @@ void wacom_setup_device_quirks(struct wacom_features *features) /* these device have multiple inputs */ if (features->type == TABLETPC || features->type == TABLETPC2FG || - features->type == BAMBOO_PT || features->type == WIRELESS) + features->type == BAMBOO_PT || features->type == WIRELESS || + (features->type >= INTUOS5S && features->type <= INTUOS5L) || + features->type == MTSCREEN) features->quirks |= WACOM_QUIRK_MULTI_INPUT; /* quirk for bamboo touch with 2 low res touches */ @@ -1225,8 +1351,8 @@ static unsigned int wacom_calculate_touch_res(unsigned int logical_max, return (logical_max * 100) / physical_max; } -void wacom_setup_input_capabilities(struct input_dev *input_dev, - struct wacom_wac *wacom_wac) +int wacom_setup_input_capabilities(struct input_dev *input_dev, + struct wacom_wac *wacom_wac) { struct wacom_features *features = &wacom_wac->features; int i; @@ -1361,6 +1487,50 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, wacom_setup_intuos(wacom_wac); break; + case INTUOS5: + case INTUOS5L: + if (features->device_type == BTN_TOOL_PEN) { + __set_bit(BTN_7, input_dev->keybit); + __set_bit(BTN_8, input_dev->keybit); + } + /* fall through */ + + case INTUOS5S: + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + + if (features->device_type == BTN_TOOL_PEN) { + for (i = 0; i < 7; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_DISTANCE, 0, + features->distance_max, + 0, 0); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + + wacom_setup_intuos(wacom_wac); + } else if (features->device_type == BTN_TOOL_FINGER) { + __clear_bit(ABS_MISC, input_dev->absbit); + + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); + + input_mt_init_slots(input_dev, features->touch_max); + + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, 255, 0, 0); + + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, features->x_max, + features->x_fuzz, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, features->y_max, + features->y_fuzz, 0); + } + break; + case INTUOS4: case INTUOS4L: __set_bit(BTN_7, input_dev->keybit); @@ -1378,9 +1548,19 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, break; case TABLETPC2FG: + case MTSCREEN: if (features->device_type == BTN_TOOL_FINGER) { - input_mt_init_slots(input_dev, 2); + wacom_wac->slots = kmalloc(features->touch_max * + sizeof(int), + GFP_KERNEL); + if (!wacom_wac->slots) + return -ENOMEM; + + for (i = 0; i < features->touch_max; i++) + wacom_wac->slots[i] = -1; + + input_mt_init_slots(input_dev, features->touch_max); input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_X, @@ -1435,6 +1615,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + input_mt_init_slots(input_dev, features->touch_max); if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { __set_bit(BTN_TOOL_TRIPLETAP, @@ -1442,13 +1623,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); - input_mt_init_slots(input_dev, 16); - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); - } else { - input_mt_init_slots(input_dev, 2); } input_set_abs_params(input_dev, ABS_MT_POSITION_X, @@ -1468,6 +1645,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, } break; } + return 0; } static const struct wacom_features wacom_features_0x00 = @@ -1635,6 +1813,24 @@ static const struct wacom_features wacom_features_0xBB = static const struct wacom_features wacom_features_0xBC = { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x26 = + { "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, + 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .touch_max = 16 }; +static const struct wacom_features wacom_features_0x27 = + { "Wacom Intuos5 touch M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, + 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .touch_max = 16 }; +static const struct wacom_features wacom_features_0x28 = + { "Wacom Intuos5 touch L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047, + 63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .touch_max = 16 }; +static const struct wacom_features wacom_features_0x29 = + { "Wacom Intuos5 S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047, + 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0x2A = + { "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, + 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF4 = { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; @@ -1676,13 +1872,19 @@ static const struct wacom_features wacom_features_0x9F = 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE2 = { "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, - 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xE3 = { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, - 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; +static const struct wacom_features wacom_features_0xE5 = + { "Wacom ISDv4 E5", WACOM_PKGLEN_MTOUCH, 26202, 16325, 255, + 0, MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE6 = { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, - 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xEC = { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1691,19 +1893,22 @@ static const struct wacom_features wacom_features_0x47 = 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x84 = { "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0, - 0, WIRELESS, 0, 0 }; + 0, WIRELESS, 0, 0, .touch_max = 16 }; static const struct wacom_features wacom_features_0xD0 = { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xD1 = { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xD2 = { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xD4 = { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1712,28 +1917,35 @@ static const struct wacom_features wacom_features_0xD5 = 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xD7 = { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xD8 = { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xDA = { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static struct wacom_features wacom_features_0xDB = { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 2 }; static const struct wacom_features wacom_features_0xDD = { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xDE = { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 16 }; static const struct wacom_features wacom_features_0xDF = { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN, 21648, 13700, 1023, - 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, + .touch_max = 16 }; static const struct wacom_features wacom_features_0x6004 = { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1807,6 +2019,11 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xBA) }, { USB_DEVICE_WACOM(0xBB) }, { USB_DEVICE_WACOM(0xBC) }, + { USB_DEVICE_WACOM(0x26) }, + { USB_DEVICE_WACOM(0x27) }, + { USB_DEVICE_WACOM(0x28) }, + { USB_DEVICE_WACOM(0x29) }, + { USB_DEVICE_WACOM(0x2A) }, { USB_DEVICE_WACOM(0x3F) }, { USB_DEVICE_WACOM(0xC5) }, { USB_DEVICE_WACOM(0xC6) }, @@ -1842,6 +2059,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x9F) }, { USB_DEVICE_WACOM(0xE2) }, { USB_DEVICE_WACOM(0xE3) }, + { USB_DEVICE_WACOM(0xE5) }, { USB_DEVICE_WACOM(0xE6) }, { USB_DEVICE_WACOM(0xEC) }, { USB_DEVICE_WACOM(0x47) }, diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index ba5a334e54d6..78fbd3f42009 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -25,6 +25,10 @@ #define WACOM_PKGLEN_BBTOUCH3 64 #define WACOM_PKGLEN_BBPEN 10 #define WACOM_PKGLEN_WIRELESS 32 +#define WACOM_PKGLEN_MTOUCH 62 + +/* wacom data size per MT contact */ +#define WACOM_BYTES_PER_MT_PACKET 11 /* device IDs */ #define STYLUS_DEVICE_ID 0x02 @@ -38,8 +42,10 @@ #define WACOM_REPORT_INTUOSREAD 5 #define WACOM_REPORT_INTUOSWRITE 6 #define WACOM_REPORT_INTUOSPAD 12 +#define WACOM_REPORT_INTUOS5PAD 3 #define WACOM_REPORT_TPC1FG 6 #define WACOM_REPORT_TPC2FG 13 +#define WACOM_REPORT_TPCMT 13 #define WACOM_REPORT_TPCHID 15 #define WACOM_REPORT_TPCST 16 @@ -65,6 +71,9 @@ enum { INTUOS4S, INTUOS4, INTUOS4L, + INTUOS5S, + INTUOS5, + INTUOS5L, WACOM_24HD, WACOM_21UX2, CINTIQ, @@ -72,6 +81,7 @@ enum { WACOM_MO, TABLETPC, TABLETPC2FG, + MTSCREEN, MAX_TYPE }; @@ -95,6 +105,7 @@ struct wacom_features { int pressure_fuzz; int distance_fuzz; unsigned quirks; + unsigned touch_max; }; struct wacom_shared { @@ -113,6 +124,8 @@ struct wacom_wac { struct input_dev *input; int pid; int battery_capacity; + int num_contacts_left; + int *slots; }; #endif diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 75838d7710ce..98d263504eea 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -187,6 +187,23 @@ config TOUCHSCREEN_DA9034 Say Y here to enable the support for the touchscreen found on Dialog Semiconductor DA9034 PMIC. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called da9034-ts. + +config TOUCHSCREEN_DA9052 + tristate "Dialog DA9052/DA9053 TSI" + depends on PMIC_DA9052 + help + Say Y here to support the touchscreen found on Dialog Semiconductor + DA9052-BC and DA9053-AA/Bx PMICs. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called da9052_tsi. + config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO @@ -306,6 +323,18 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +config TOUCHSCREEN_WACOM_I2C + tristate "Wacom Tablet support (I2C)" + depends on I2C + help + Say Y here if you want to use the I2C version of the Wacom + Pen Tablet. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module + will be called wacom_i2c. + config TOUCHSCREEN_LPC32XX tristate "LPC32XX touchscreen controller" depends on ARCH_LPC32XX @@ -635,6 +664,7 @@ config TOUCHSCREEN_USB_COMPOSITE - Zytronic controllers - Elo TouchSystems 2700 IntelliTouch - EasyTouch USB Touch Controller from Data Modul + - e2i (Mimo monitors) Have a look at for a usage description and the required user-space stuff. @@ -721,7 +751,7 @@ config TOUCHSCREEN_USB_ELO config TOUCHSCREEN_USB_E2I default y - bool "e2i Touchscreen controller (e.g. from Mimo 740)" + bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ZYTRONIC @@ -744,7 +774,7 @@ config TOUCHSCREEN_USB_EASYTOUCH bool "EasyTouch USB Touch controller device support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE help - Say Y here if you have a EasyTouch USB Touch controller device support. + Say Y here if you have an EasyTouch USB Touch controller. If unsure, say N. config TOUCHSCREEN_TOUCHIT213 diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 3d5cf8cbf89c..eb8bfe1c1a46 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o +obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o @@ -59,6 +60,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o +obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C) += wacom_i2c.o obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 19d4ea65ea01..42e645062c20 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -236,7 +236,6 @@ struct mxt_object { struct mxt_message { u8 reportid; u8 message[7]; - u8 checksum; }; struct mxt_finger { @@ -326,17 +325,12 @@ static bool mxt_object_writable(unsigned int type) } static void mxt_dump_message(struct device *dev, - struct mxt_message *message) + struct mxt_message *message) { - dev_dbg(dev, "reportid:\t0x%x\n", message->reportid); - dev_dbg(dev, "message1:\t0x%x\n", message->message[0]); - dev_dbg(dev, "message2:\t0x%x\n", message->message[1]); - dev_dbg(dev, "message3:\t0x%x\n", message->message[2]); - dev_dbg(dev, "message4:\t0x%x\n", message->message[3]); - dev_dbg(dev, "message5:\t0x%x\n", message->message[4]); - dev_dbg(dev, "message6:\t0x%x\n", message->message[5]); - dev_dbg(dev, "message7:\t0x%x\n", message->message[6]); - dev_dbg(dev, "checksum:\t0x%x\n", message->checksum); + dev_dbg(dev, "reportid: %u\tmessage: %02x %02x %02x %02x %02x %02x %02x\n", + message->reportid, message->message[0], message->message[1], + message->message[2], message->message[3], message->message[4], + message->message[5], message->message[6]); } static int mxt_check_bootloader(struct i2c_client *client, @@ -506,7 +500,7 @@ static int mxt_write_object(struct mxt_data *data, u16 reg; object = mxt_get_object(data, type); - if (!object) + if (!object || offset >= object->size + 1) return -EINVAL; reg = object->start_address; @@ -1049,8 +1043,8 @@ static ssize_t mxt_update_fw_store(struct device *dev, return count; } -static DEVICE_ATTR(object, 0444, mxt_object_show, NULL); -static DEVICE_ATTR(update_fw, 0664, NULL, mxt_update_fw_store); +static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL); +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store); static struct attribute *mxt_attrs[] = { &dev_attr_object.attr, @@ -1201,7 +1195,7 @@ static int __devexit mxt_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int mxt_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -1239,13 +1233,10 @@ static int mxt_resume(struct device *dev) return 0; } - -static const struct dev_pm_ops mxt_pm_ops = { - .suspend = mxt_suspend, - .resume = mxt_resume, -}; #endif +static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume); + static const struct i2c_device_id mxt_id[] = { { "qt602240_ts", 0 }, { "atmel_mxt_ts", 0 }, @@ -1258,9 +1249,7 @@ static struct i2c_driver mxt_driver = { .driver = { .name = "atmel_mxt_ts", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &mxt_pm_ops, -#endif }, .probe = mxt_probe, .remove = __devexit_p(mxt_remove), diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c new file mode 100644 index 000000000000..e8df341090c0 --- /dev/null +++ b/drivers/input/touchscreen/da9052_tsi.c @@ -0,0 +1,370 @@ +/* + * TSI driver for Dialog DA9052 + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include + +#include +#include + +#define TSI_PEN_DOWN_STATUS 0x40 + +struct da9052_tsi { + struct da9052 *da9052; + struct input_dev *dev; + struct delayed_work ts_pen_work; + struct mutex mutex; + unsigned int irq_pendwn; + unsigned int irq_datardy; + bool stopped; + bool adc_on; +}; + +static void da9052_ts_adc_toggle(struct da9052_tsi *tsi, bool on) +{ + da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, on); + tsi->adc_on = on; +} + +static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data) +{ + struct da9052_tsi *tsi = data; + + if (!tsi->stopped) { + /* Mask PEN_DOWN event and unmask TSI_READY event */ + disable_irq_nosync(tsi->irq_pendwn); + enable_irq(tsi->irq_datardy); + + da9052_ts_adc_toggle(tsi, true); + + schedule_delayed_work(&tsi->ts_pen_work, HZ / 50); + } + + return IRQ_HANDLED; +} + +static void da9052_ts_read(struct da9052_tsi *tsi) +{ + struct input_dev *input = tsi->dev; + int ret; + u16 x, y, z; + u8 v; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG); + if (ret < 0) + return; + + x = (u16) ret; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG); + if (ret < 0) + return; + + y = (u16) ret; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG); + if (ret < 0) + return; + + z = (u16) ret; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG); + if (ret < 0) + return; + + v = (u8) ret; + + x = ((x << 2) & 0x3fc) | (v & 0x3); + y = ((y << 2) & 0x3fc) | ((v & 0xc) >> 2); + z = ((z << 2) & 0x3fc) | ((v & 0x30) >> 4); + + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_PRESSURE, z); + input_sync(input); +} + +static irqreturn_t da9052_ts_datardy_irq(int irq, void *data) +{ + struct da9052_tsi *tsi = data; + + da9052_ts_read(tsi); + + return IRQ_HANDLED; +} + +static void da9052_ts_pen_work(struct work_struct *work) +{ + struct da9052_tsi *tsi = container_of(work, struct da9052_tsi, + ts_pen_work.work); + if (!tsi->stopped) { + int ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG); + if (ret < 0 || (ret & TSI_PEN_DOWN_STATUS)) { + /* Pen is still DOWN (or read error) */ + schedule_delayed_work(&tsi->ts_pen_work, HZ / 50); + } else { + struct input_dev *input = tsi->dev; + + /* Pen UP */ + da9052_ts_adc_toggle(tsi, false); + + /* Report Pen UP */ + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); + + /* + * FIXME: Fixes the unhandled irq issue when quick + * pen down and pen up events occurs + */ + ret = da9052_reg_update(tsi->da9052, + DA9052_EVENT_B_REG, 0xC0, 0xC0); + if (ret < 0) + return; + + /* Mask TSI_READY event and unmask PEN_DOWN event */ + disable_irq(tsi->irq_datardy); + enable_irq(tsi->irq_pendwn); + } + } +} + +static int __devinit da9052_ts_configure_gpio(struct da9052 *da9052) +{ + int error; + + error = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0); + if (error < 0) + return error; + + error = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0); + if (error < 0) + return error; + + error = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0); + if (error < 0) + return error; + + return 0; +} + +static int __devinit da9052_configure_tsi(struct da9052_tsi *tsi) +{ + int error; + + error = da9052_ts_configure_gpio(tsi->da9052); + if (error) + return error; + + /* Measure TSI sample every 1ms */ + error = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG, + 1 << 6, 1 << 6); + if (error < 0) + return error; + + /* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */ + error = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0); + if (error < 0) + return error; + + /* Supply TSIRef through LD09 */ + error = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59); + if (error < 0) + return error; + + return 0; +} + +static int da9052_ts_input_open(struct input_dev *input_dev) +{ + struct da9052_tsi *tsi = input_get_drvdata(input_dev); + + tsi->stopped = false; + mb(); + + /* Unmask PEN_DOWN event */ + enable_irq(tsi->irq_pendwn); + + /* Enable Pen Detect Circuit */ + return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, + 1 << 1, 1 << 1); +} + +static void da9052_ts_input_close(struct input_dev *input_dev) +{ + struct da9052_tsi *tsi = input_get_drvdata(input_dev); + + tsi->stopped = true; + mb(); + disable_irq(tsi->irq_pendwn); + cancel_delayed_work_sync(&tsi->ts_pen_work); + + if (tsi->adc_on) { + disable_irq(tsi->irq_datardy); + da9052_ts_adc_toggle(tsi, false); + + /* + * If ADC was on that means that pendwn IRQ was disabled + * twice and we need to enable it to keep enable/disable + * counter balanced. IRQ is still off though. + */ + enable_irq(tsi->irq_pendwn); + } + + /* Disable Pen Detect Circuit */ + da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0); +} + +static int __devinit da9052_ts_probe(struct platform_device *pdev) +{ + struct da9052 *da9052; + struct da9052_tsi *tsi; + struct input_dev *input_dev; + int irq_pendwn; + int irq_datardy; + int error; + + da9052 = dev_get_drvdata(pdev->dev.parent); + if (!da9052) + return -EINVAL; + + irq_pendwn = platform_get_irq_byname(pdev, "PENDWN"); + irq_datardy = platform_get_irq_byname(pdev, "TSIRDY"); + if (irq_pendwn < 0 || irq_datardy < 0) { + dev_err(da9052->dev, "Unable to determine device interrupts\n"); + return -ENXIO; + } + + tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!tsi || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + tsi->da9052 = da9052; + tsi->dev = input_dev; + tsi->irq_pendwn = da9052->irq_base + irq_pendwn; + tsi->irq_datardy = da9052->irq_base + irq_datardy; + tsi->stopped = true; + INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work); + + input_dev->id.version = 0x0101; + input_dev->id.vendor = 0x15B6; + input_dev->id.product = 0x9052; + input_dev->name = "Dialog DA9052 TouchScreen Driver"; + input_dev->dev.parent = &pdev->dev; + input_dev->open = da9052_ts_input_open; + input_dev->close = da9052_ts_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0); + + input_set_drvdata(input_dev, tsi); + + /* Disable Pen Detect Circuit */ + da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0); + + /* Disable ADC */ + da9052_ts_adc_toggle(tsi, false); + + error = request_threaded_irq(tsi->irq_pendwn, + NULL, da9052_ts_pendwn_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "PENDWN", tsi); + if (error) { + dev_err(tsi->da9052->dev, + "Failed to register PENDWN IRQ %d, error = %d\n", + tsi->irq_pendwn, error); + goto err_free_mem; + } + + error = request_threaded_irq(tsi->irq_datardy, + NULL, da9052_ts_datardy_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "TSIRDY", tsi); + if (error) { + dev_err(tsi->da9052->dev, + "Failed to register TSIRDY IRQ %d, error = %d\n", + tsi->irq_datardy, error); + goto err_free_pendwn_irq; + } + + /* Mask PEN_DOWN and TSI_READY events */ + disable_irq(tsi->irq_pendwn); + disable_irq(tsi->irq_datardy); + + error = da9052_configure_tsi(tsi); + if (error) + goto err_free_datardy_irq; + + error = input_register_device(tsi->dev); + if (error) + goto err_free_datardy_irq; + + platform_set_drvdata(pdev, tsi); + + return 0; + +err_free_datardy_irq: + free_irq(tsi->irq_datardy, tsi); +err_free_pendwn_irq: + free_irq(tsi->irq_pendwn, tsi); +err_free_mem: + kfree(tsi); + input_free_device(input_dev); + + return error; +} + +static int __devexit da9052_ts_remove(struct platform_device *pdev) +{ + struct da9052_tsi *tsi = platform_get_drvdata(pdev); + + da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19); + + free_irq(tsi->irq_pendwn, tsi); + free_irq(tsi->irq_datardy, tsi); + + input_unregister_device(tsi->dev); + kfree(tsi); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver da9052_tsi_driver = { + .probe = da9052_ts_probe, + .remove = __devexit_p(da9052_ts_remove), + .driver = { + .name = "da9052-tsi", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(da9052_tsi_driver); + +MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052"); +MODULE_AUTHOR("Anthony Olech "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-tsi"); diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c index 455353908bdf..1809677a6513 100644 --- a/drivers/input/touchscreen/dynapro.c +++ b/drivers/input/touchscreen/dynapro.c @@ -188,19 +188,4 @@ static struct serio_driver dynapro_drv = { .disconnect = dynapro_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init dynapro_init(void) -{ - return serio_register_driver(&dynapro_drv); -} - -static void __exit dynapro_exit(void) -{ - serio_unregister_driver(&dynapro_drv); -} - -module_init(dynapro_init); -module_exit(dynapro_exit); +module_serio_driver(dynapro_drv); diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index 486d31ba9c09..957423d1471d 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -405,19 +405,4 @@ static struct serio_driver elo_drv = { .disconnect = elo_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init elo_init(void) -{ - return serio_register_driver(&elo_drv); -} - -static void __exit elo_exit(void) -{ - serio_unregister_driver(&elo_drv); -} - -module_init(elo_init); -module_exit(elo_exit); +module_serio_driver(elo_drv); diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c index 80b21800355f..10794ddbdf58 100644 --- a/drivers/input/touchscreen/fujitsu_ts.c +++ b/drivers/input/touchscreen/fujitsu_ts.c @@ -175,15 +175,4 @@ static struct serio_driver fujitsu_drv = { .disconnect = fujitsu_disconnect, }; -static int __init fujitsu_init(void) -{ - return serio_register_driver(&fujitsu_drv); -} - -static void __exit fujitsu_exit(void) -{ - serio_unregister_driver(&fujitsu_drv); -} - -module_init(fujitsu_init); -module_exit(fujitsu_exit); +module_serio_driver(fujitsu_drv); diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c index a54f90e02ab6..41c71766bf18 100644 --- a/drivers/input/touchscreen/gunze.c +++ b/drivers/input/touchscreen/gunze.c @@ -186,19 +186,4 @@ static struct serio_driver gunze_drv = { .disconnect = gunze_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init gunze_init(void) -{ - return serio_register_driver(&gunze_drv); -} - -static void __exit gunze_exit(void) -{ - serio_unregister_driver(&gunze_drv); -} - -module_init(gunze_init); -module_exit(gunze_exit); +module_serio_driver(gunze_drv); diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index 6107e563e681..b9e8686a6f1c 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -476,19 +476,4 @@ static struct serio_driver h3600ts_drv = { .disconnect = h3600ts_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init h3600ts_init(void) -{ - return serio_register_driver(&h3600ts_drv); -} - -static void __exit h3600ts_exit(void) -{ - serio_unregister_driver(&h3600ts_drv); -} - -module_init(h3600ts_init); -module_exit(h3600ts_exit); +module_serio_driver(h3600ts_drv); diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c index 2da6cc31bb21..0cc47ea98acf 100644 --- a/drivers/input/touchscreen/hampshire.c +++ b/drivers/input/touchscreen/hampshire.c @@ -187,19 +187,4 @@ static struct serio_driver hampshire_drv = { .disconnect = hampshire_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init hampshire_init(void) -{ - return serio_register_driver(&hampshire_drv); -} - -static void __exit hampshire_exit(void) -{ - serio_unregister_driver(&hampshire_drv); -} - -module_init(hampshire_init); -module_exit(hampshire_exit); +module_serio_driver(hampshire_drv); diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c index 192ade0a0fb9..a29c99c32245 100644 --- a/drivers/input/touchscreen/inexio.c +++ b/drivers/input/touchscreen/inexio.c @@ -189,19 +189,4 @@ static struct serio_driver inexio_drv = { .disconnect = inexio_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init inexio_init(void) -{ - return serio_register_driver(&inexio_drv); -} - -static void __exit inexio_exit(void) -{ - serio_unregister_driver(&inexio_drv); -} - -module_init(inexio_init); -module_exit(inexio_exit); +module_serio_driver(inexio_drv); diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c index afcd0691ec67..4c2b8ed3bf16 100644 --- a/drivers/input/touchscreen/lpc32xx_ts.c +++ b/drivers/input/touchscreen/lpc32xx_ts.c @@ -22,6 +22,7 @@ #include #include #include +#include /* * Touchscreen controller register offsets @@ -383,6 +384,14 @@ static const struct dev_pm_ops lpc32xx_ts_pm_ops = { #define LPC32XX_TS_PM_OPS NULL #endif +#ifdef CONFIG_OF +static struct of_device_id lpc32xx_tsc_of_match[] = { + { .compatible = "nxp,lpc3220-tsc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_tsc_of_match); +#endif + static struct platform_driver lpc32xx_ts_driver = { .probe = lpc32xx_ts_probe, .remove = __devexit_p(lpc32xx_ts_remove), @@ -390,6 +399,7 @@ static struct platform_driver lpc32xx_ts_driver = { .name = MOD_NAME, .owner = THIS_MODULE, .pm = LPC32XX_TS_PM_OPS, + .of_match_table = of_match_ptr(lpc32xx_tsc_of_match), }, }; module_platform_driver(lpc32xx_ts_driver); diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c index 9077228418b7..eb66b7c37c2f 100644 --- a/drivers/input/touchscreen/mtouch.c +++ b/drivers/input/touchscreen/mtouch.c @@ -202,19 +202,4 @@ static struct serio_driver mtouch_drv = { .disconnect = mtouch_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init mtouch_init(void) -{ - return serio_register_driver(&mtouch_drv); -} - -static void __exit mtouch_exit(void) -{ - serio_unregister_driver(&mtouch_drv); -} - -module_init(mtouch_init); -module_exit(mtouch_exit); +module_serio_driver(mtouch_drv); diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c index 4c012fb2b01e..4ccde45b9da2 100644 --- a/drivers/input/touchscreen/penmount.c +++ b/drivers/input/touchscreen/penmount.c @@ -317,19 +317,4 @@ static struct serio_driver pm_drv = { .disconnect = pm_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init pm_init(void) -{ - return serio_register_driver(&pm_drv); -} - -static void __exit pm_exit(void) -{ - serio_unregister_driver(&pm_drv); -} - -module_init(pm_init); -module_exit(pm_exit); +module_serio_driver(pm_drv); diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c index cbbf71b22696..6cb68a1981bf 100644 --- a/drivers/input/touchscreen/st1232.c +++ b/drivers/input/touchscreen/st1232.c @@ -218,7 +218,7 @@ static int __devexit st1232_ts_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int st1232_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -243,18 +243,25 @@ static int st1232_ts_resume(struct device *dev) return 0; } -static const struct dev_pm_ops st1232_ts_pm_ops = { - .suspend = st1232_ts_suspend, - .resume = st1232_ts_resume, -}; #endif +static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops, + st1232_ts_suspend, st1232_ts_resume); + static const struct i2c_device_id st1232_ts_id[] = { { ST1232_TS_NAME, 0 }, { } }; MODULE_DEVICE_TABLE(i2c, st1232_ts_id); +#ifdef CONFIG_OF +static const struct of_device_id st1232_ts_dt_ids[] __devinitconst = { + { .compatible = "sitronix,st1232", }, + { } +}; +MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids); +#endif + static struct i2c_driver st1232_ts_driver = { .probe = st1232_ts_probe, .remove = __devexit_p(st1232_ts_remove), @@ -262,9 +269,8 @@ static struct i2c_driver st1232_ts_driver = { .driver = { .name = ST1232_TS_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM + .of_match_table = of_match_ptr(st1232_ts_dt_ids), .pm = &st1232_ts_pm_ops, -#endif }, }; diff --git a/drivers/input/touchscreen/touchit213.c b/drivers/input/touchscreen/touchit213.c index d1297ba19daf..5f29e5b8e1c1 100644 --- a/drivers/input/touchscreen/touchit213.c +++ b/drivers/input/touchscreen/touchit213.c @@ -216,19 +216,4 @@ static struct serio_driver touchit213_drv = { .disconnect = touchit213_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init touchit213_init(void) -{ - return serio_register_driver(&touchit213_drv); -} - -static void __exit touchit213_exit(void) -{ - serio_unregister_driver(&touchit213_drv); -} - -module_init(touchit213_init); -module_exit(touchit213_exit); +module_serio_driver(touchit213_drv); diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c index 3a5c142c2a78..8a2887daf194 100644 --- a/drivers/input/touchscreen/touchright.c +++ b/drivers/input/touchscreen/touchright.c @@ -176,19 +176,4 @@ static struct serio_driver tr_drv = { .disconnect = tr_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init tr_init(void) -{ - return serio_register_driver(&tr_drv); -} - -static void __exit tr_exit(void) -{ - serio_unregister_driver(&tr_drv); -} - -module_init(tr_init); -module_exit(tr_exit); +module_serio_driver(tr_drv); diff --git a/drivers/input/touchscreen/touchwin.c b/drivers/input/touchscreen/touchwin.c index 763a656a59f8..588cdcb839dd 100644 --- a/drivers/input/touchscreen/touchwin.c +++ b/drivers/input/touchscreen/touchwin.c @@ -183,19 +183,4 @@ static struct serio_driver tw_drv = { .disconnect = tw_disconnect, }; -/* - * The functions for inserting/removing us as a module. - */ - -static int __init tw_init(void) -{ - return serio_register_driver(&tw_drv); -} - -static void __exit tw_exit(void) -{ - serio_unregister_driver(&tw_drv); -} - -module_init(tw_init); -module_exit(tw_exit); +module_serio_driver(tw_drv); diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c index 29d5ed4dd31c..63209aaa55f0 100644 --- a/drivers/input/touchscreen/tsc40.c +++ b/drivers/input/touchscreen/tsc40.c @@ -167,17 +167,7 @@ static struct serio_driver tsc_drv = { .disconnect = tsc_disconnect, }; -static int __init tsc_ser_init(void) -{ - return serio_register_driver(&tsc_drv); -} -module_init(tsc_ser_init); - -static void __exit tsc_exit(void) -{ - serio_unregister_driver(&tsc_drv); -} -module_exit(tsc_exit); +module_serio_driver(tsc_drv); MODULE_AUTHOR("Sebastian Andrzej Siewior "); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c new file mode 100644 index 000000000000..35572575d34a --- /dev/null +++ b/drivers/input/touchscreen/wacom_i2c.c @@ -0,0 +1,282 @@ +/* + * Wacom Penabled Driver for I2C + * + * Copyright (c) 2011 Tatsunosuke Tobita, Wacom. + * + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version of 2 of the License, + * or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define WACOM_CMD_QUERY0 0x04 +#define WACOM_CMD_QUERY1 0x00 +#define WACOM_CMD_QUERY2 0x33 +#define WACOM_CMD_QUERY3 0x02 +#define WACOM_CMD_THROW0 0x05 +#define WACOM_CMD_THROW1 0x00 +#define WACOM_QUERY_SIZE 19 +#define WACOM_RETRY_CNT 100 + +struct wacom_features { + int x_max; + int y_max; + int pressure_max; + char fw_version; +}; + +struct wacom_i2c { + struct i2c_client *client; + struct input_dev *input; + u8 data[WACOM_QUERY_SIZE]; +}; + +static int wacom_query_device(struct i2c_client *client, + struct wacom_features *features) +{ + int ret; + u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1, + WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 }; + u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 }; + u8 data[WACOM_QUERY_SIZE]; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = sizeof(cmd1), + .buf = cmd1, + }, + { + .addr = client->addr, + .flags = 0, + .len = sizeof(cmd2), + .buf = cmd2, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(data), + .buf = data, + }, + }; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + if (ret != ARRAY_SIZE(msgs)) + return -EIO; + + features->x_max = get_unaligned_le16(&data[3]); + features->y_max = get_unaligned_le16(&data[5]); + features->pressure_max = get_unaligned_le16(&data[11]); + features->fw_version = get_unaligned_le16(&data[13]); + + dev_dbg(&client->dev, + "x_max:%d, y_max:%d, pressure:%d, fw:%d\n", + features->x_max, features->y_max, + features->pressure_max, features->fw_version); + + return 0; +} + +static irqreturn_t wacom_i2c_irq(int irq, void *dev_id) +{ + struct wacom_i2c *wac_i2c = dev_id; + struct input_dev *input = wac_i2c->input; + u8 *data = wac_i2c->data; + unsigned int x, y, pressure; + unsigned char tsw, f1, f2, ers; + int error; + + error = i2c_master_recv(wac_i2c->client, + wac_i2c->data, sizeof(wac_i2c->data)); + if (error < 0) + goto out; + + tsw = data[3] & 0x01; + ers = data[3] & 0x04; + f1 = data[3] & 0x02; + f2 = data[3] & 0x10; + x = le16_to_cpup((__le16 *)&data[4]); + y = le16_to_cpup((__le16 *)&data[6]); + pressure = le16_to_cpup((__le16 *)&data[8]); + + input_report_key(input, BTN_TOUCH, tsw || ers); + input_report_key(input, BTN_TOOL_PEN, tsw); + input_report_key(input, BTN_TOOL_RUBBER, ers); + input_report_key(input, BTN_STYLUS, f1); + input_report_key(input, BTN_STYLUS2, f2); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_PRESSURE, pressure); + input_sync(input); + +out: + return IRQ_HANDLED; +} + +static int wacom_i2c_open(struct input_dev *dev) +{ + struct wacom_i2c *wac_i2c = input_get_drvdata(dev); + struct i2c_client *client = wac_i2c->client; + + enable_irq(client->irq); + + return 0; +} + +static void wacom_i2c_close(struct input_dev *dev) +{ + struct wacom_i2c *wac_i2c = input_get_drvdata(dev); + struct i2c_client *client = wac_i2c->client; + + disable_irq(client->irq); +} + +static int __devinit wacom_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct wacom_i2c *wac_i2c; + struct input_dev *input; + struct wacom_features features; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c_check_functionality error\n"); + return -EIO; + } + + error = wacom_query_device(client, &features); + if (error) + return error; + + wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL); + input = input_allocate_device(); + if (!wac_i2c || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + wac_i2c->client = client; + wac_i2c->input = input; + + input->name = "Wacom I2C Digitizer"; + input->id.bustype = BUS_I2C; + input->id.vendor = 0x56a; + input->id.version = features.fw_version; + input->dev.parent = &client->dev; + input->open = wacom_i2c_open; + input->close = wacom_i2c_close; + + input->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + + __set_bit(BTN_TOOL_PEN, input->keybit); + __set_bit(BTN_TOOL_RUBBER, input->keybit); + __set_bit(BTN_STYLUS, input->keybit); + __set_bit(BTN_STYLUS2, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); + + input_set_abs_params(input, ABS_X, 0, features.x_max, 0, 0); + input_set_abs_params(input, ABS_Y, 0, features.y_max, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, + 0, features.pressure_max, 0, 0); + + input_set_drvdata(input, wac_i2c); + + error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "wacom_i2c", wac_i2c); + if (error) { + dev_err(&client->dev, + "Failed to enable IRQ, error: %d\n", error); + goto err_free_mem; + } + + /* Disable the IRQ, we'll enable it in wac_i2c_open() */ + disable_irq(client->irq); + + error = input_register_device(wac_i2c->input); + if (error) { + dev_err(&client->dev, + "Failed to register input device, error: %d\n", error); + goto err_free_irq; + } + + i2c_set_clientdata(client, wac_i2c); + return 0; + +err_free_irq: + free_irq(client->irq, wac_i2c); +err_free_mem: + input_free_device(input); + kfree(wac_i2c); + + return error; +} + +static int __devexit wacom_i2c_remove(struct i2c_client *client) +{ + struct wacom_i2c *wac_i2c = i2c_get_clientdata(client); + + free_irq(client->irq, wac_i2c); + input_unregister_device(wac_i2c->input); + kfree(wac_i2c); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int wacom_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + disable_irq(client->irq); + + return 0; +} + +static int wacom_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + enable_irq(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume); + +static const struct i2c_device_id wacom_i2c_id[] = { + { "WAC_I2C_EMR", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, wacom_i2c_id); + +static struct i2c_driver wacom_i2c_driver = { + .driver = { + .name = "wacom_i2c", + .owner = THIS_MODULE, + .pm = &wacom_i2c_pm, + }, + + .probe = wacom_i2c_probe, + .remove = __devexit_p(wacom_i2c_remove), + .id_table = wacom_i2c_id, +}; +module_i2c_driver(wacom_i2c_driver); + +MODULE_AUTHOR("Tatsunosuke Tobita "); +MODULE_DESCRIPTION("WACOM EMR I2C Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 1569a3934ab2..8f9ad2f893b8 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -594,15 +594,4 @@ static struct serio_driver w8001_drv = { .disconnect = w8001_disconnect, }; -static int __init w8001_init(void) -{ - return serio_register_driver(&w8001_drv); -} - -static void __exit w8001_exit(void) -{ - serio_unregister_driver(&w8001_drv); -} - -module_init(w8001_init); -module_exit(w8001_exit); +module_serio_driver(w8001_drv); diff --git a/include/linux/gameport.h b/include/linux/gameport.h index b456b08d70ed..b986be513406 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -153,6 +153,19 @@ int __must_check __gameport_register_driver(struct gameport_driver *drv, void gameport_unregister_driver(struct gameport_driver *drv); +/** + * module_gameport_driver() - Helper macro for registering a gameport driver + * @__gameport_driver: gameport_driver struct + * + * Helper macro for gameport drivers which do not do anything special in + * module init/exit. This eliminates a lot of boilerplate. Each module may + * only use this macro once, and calling it replaces module_init() and + * module_exit(). + */ +#define module_gameport_driver(__gameport_driver) \ + module_driver(__gameport_driver, gameport_register_driver, \ + gameport_unregister_driver) + #endif /* __KERNEL__ */ #define GAMEPORT_MODE_DISABLED 0 diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index cec17cf6cac2..d8341cb47b60 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -157,6 +157,7 @@ struct i2c_client; /* forward declaration */ struct adp5588_gpio_platform_data { int gpio_start; /* GPIO Chip base # */ + const char *const *names; unsigned irq_base; /* interrupt base # */ unsigned pullup_dis_mask; /* Pull-Up Disable Mask */ int (*setup)(struct i2c_client *client, diff --git a/include/linux/input/lm8333.h b/include/linux/input/lm8333.h new file mode 100644 index 000000000000..79f918c6e8c5 --- /dev/null +++ b/include/linux/input/lm8333.h @@ -0,0 +1,24 @@ +/* + * public include for LM8333 keypad driver - same license as driver + * Copyright (C) 2012 Wolfram Sang, Pengutronix + */ + +#ifndef _LM8333_H +#define _LM8333_H + +struct lm8333; + +struct lm8333_platform_data { + /* Keymap data */ + const struct matrix_keymap_data *matrix_data; + /* Active timeout before enter HALT mode in microseconds */ + unsigned active_time; + /* Debounce interval in microseconds */ + unsigned debounce_time; +}; + +extern int lm8333_read8(struct lm8333 *lm8333, u8 cmd); +extern int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val); +extern int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf); + +#endif /* _LM8333_H */ diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 6c07ced0af81..5f3aa6b11bfa 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -75,54 +75,10 @@ struct matrix_keypad_platform_data { bool no_autorepeat; }; -/** - * matrix_keypad_build_keymap - convert platform keymap into matrix keymap - * @keymap_data: keymap supplied by the platform code - * @row_shift: number of bits to shift row value by to advance to the next - * line in the keymap - * @keymap: expanded version of keymap that is suitable for use by - * matrix keyboad driver - * @keybit: pointer to bitmap of keys supported by input device - * - * This function converts platform keymap (encoded with KEY() macro) into - * an array of keycodes that is suitable for using in a standard matrix - * keyboard driver that uses row and col as indices. - */ -static inline void -matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, - unsigned int row_shift, - unsigned short *keymap, unsigned long *keybit) -{ - int i; - - for (i = 0; i < keymap_data->keymap_size; i++) { - unsigned int key = keymap_data->keymap[i]; - unsigned int row = KEY_ROW(key); - unsigned int col = KEY_COL(key); - unsigned short code = KEY_VAL(key); - - keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code; - __set_bit(code, keybit); - } - __clear_bit(KEY_RESERVED, keybit); -} - -#ifdef CONFIG_INPUT_OF_MATRIX_KEYMAP -struct matrix_keymap_data * -matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname); - -void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd); -#else -static inline struct matrix_keymap_data * -matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname) -{ - return NULL; -} - -static inline void -matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) -{ -} -#endif +int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, + const char *keymap_name, + unsigned int rows, unsigned int cols, + unsigned short *keymap, + struct input_dev *input_dev); #endif /* _MATRIX_KEYPAD_H */ diff --git a/include/linux/input/navpoint.h b/include/linux/input/navpoint.h new file mode 100644 index 000000000000..45050eb34de3 --- /dev/null +++ b/include/linux/input/navpoint.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2012 Paul Parsons + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +struct navpoint_platform_data { + int port; /* PXA SSP port for pxa_ssp_request() */ + int gpio; /* GPIO for power on/off */ +}; diff --git a/include/linux/serio.h b/include/linux/serio.h index ca82861b0e46..6d6cfd3e94a3 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -96,6 +96,19 @@ int __must_check __serio_register_driver(struct serio_driver *drv, void serio_unregister_driver(struct serio_driver *drv); +/** + * module_serio_driver() - Helper macro for registering a serio driver + * @__serio_driver: serio_driver struct + * + * Helper macro for serio drivers which do not do anything special in + * module init/exit. This eliminates a lot of boilerplate. Each module + * may only use this macro once, and calling it replaces module_init() + * and module_exit(). + */ +#define module_serio_driver(__serio_driver) \ + module_driver(__serio_driver, serio_register_driver, \ + serio_unregister_driver) + static inline int serio_write(struct serio *serio, unsigned char data) { if (serio->write)