[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters
This patch moves the ASIX AX8817x driver into its own file, just using the "usbnet" infrastructure as a utility library. - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks, moving code from one file to another, and exporting a few functions. - This includes updates from Jamie Painter to add (and use) a new hook to handle the different maximum transfer sizes for rx and tx sides. - Also from Jamie, some bugfixes: * MDIO byteorder (to address some PPC media negotiation problems); * Force alignment at key spots when using ax88772 framing (on some embedded hardware, the network stack will break otherwise); * Address some link reset problems. It also makes this driver use the standard (5 seconds vs half second) control timeouts used elsewhere in USB; and wraps a few lines before the 80th column (which previously needed it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
38bde1d469
commit
2e55cc7210
|
@ -202,23 +202,22 @@ config USB_CDCETHER
|
|||
IEEE 802 "local assignment" bit is set in the address, a "usbX"
|
||||
name is used instead.
|
||||
|
||||
comment "USB Network Adapters"
|
||||
depends on USB_USBNET
|
||||
comment "Drivers built using the usbnet core"
|
||||
|
||||
config USB_AX8817X
|
||||
boolean "ASIX AX88xxx Based USB 2.0 Ethernet Devices"
|
||||
config USB_NET_AX8817X
|
||||
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
|
||||
depends on USB_USBNET && NET_ETHERNET
|
||||
select CRC32
|
||||
select MII
|
||||
default y
|
||||
help
|
||||
This option adds support for ASIX AX88xxx based USB 2.0
|
||||
10/100 Ethernet devices.
|
||||
10/100 Ethernet adapters.
|
||||
|
||||
This driver should work with at least the following devices:
|
||||
* Aten UC210T
|
||||
* ASIX AX88172
|
||||
* Billionton Systems, USB2AR
|
||||
* Billionton Systems, USB2AR
|
||||
* Buffalo LUA-U2-KTX
|
||||
* Corega FEther USB2-TX
|
||||
* D-Link DUB-E100
|
||||
|
@ -231,7 +230,7 @@ config USB_AX8817X
|
|||
* TrendNet TU2-ET100
|
||||
|
||||
This driver creates an interface named "ethX", where X depends on
|
||||
what other networking devices you have in use.
|
||||
what other networking devices you have in use.
|
||||
|
||||
|
||||
config USB_NET_CDC_SUBSET
|
||||
|
|
|
@ -6,6 +6,7 @@ obj-$(CONFIG_USB_CATC) += catc.o
|
|||
obj-$(CONFIG_USB_KAWETH) += kaweth.o
|
||||
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
|
||||
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
|
||||
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
|
||||
obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o
|
||||
obj-$(CONFIG_USB_USBNET) += usbnet.o
|
||||
obj-$(CONFIG_USB_ZD1201) += zd1201.o
|
||||
|
|
|
@ -0,0 +1,948 @@
|
|||
/*
|
||||
* ASIX AX8817X based USB 2.0 Ethernet Devices
|
||||
* Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
|
||||
* Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
|
||||
* Copyright (c) 2002-2003 TiVo Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
// #define DEBUG // error path messages, extra info
|
||||
// #define VERBOSE // more; success messages
|
||||
|
||||
#include <linux/config.h>
|
||||
#ifdef CONFIG_USB_DEBUG
|
||||
# define DEBUG
|
||||
#endif
|
||||
#include <linux/module.h>
|
||||
#include <linux/kmod.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/ethtool.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/mii.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/crc32.h>
|
||||
|
||||
#include "usbnet.h"
|
||||
|
||||
|
||||
/* ASIX AX8817X based USB 2.0 Ethernet Devices */
|
||||
|
||||
#define AX_CMD_SET_SW_MII 0x06
|
||||
#define AX_CMD_READ_MII_REG 0x07
|
||||
#define AX_CMD_WRITE_MII_REG 0x08
|
||||
#define AX_CMD_SET_HW_MII 0x0a
|
||||
#define AX_CMD_READ_EEPROM 0x0b
|
||||
#define AX_CMD_WRITE_EEPROM 0x0c
|
||||
#define AX_CMD_WRITE_ENABLE 0x0d
|
||||
#define AX_CMD_WRITE_DISABLE 0x0e
|
||||
#define AX_CMD_WRITE_RX_CTL 0x10
|
||||
#define AX_CMD_READ_IPG012 0x11
|
||||
#define AX_CMD_WRITE_IPG0 0x12
|
||||
#define AX_CMD_WRITE_IPG1 0x13
|
||||
#define AX_CMD_WRITE_IPG2 0x14
|
||||
#define AX_CMD_WRITE_MULTI_FILTER 0x16
|
||||
#define AX_CMD_READ_NODE_ID 0x17
|
||||
#define AX_CMD_READ_PHY_ID 0x19
|
||||
#define AX_CMD_READ_MEDIUM_STATUS 0x1a
|
||||
#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
|
||||
#define AX_CMD_READ_MONITOR_MODE 0x1c
|
||||
#define AX_CMD_WRITE_MONITOR_MODE 0x1d
|
||||
#define AX_CMD_WRITE_GPIOS 0x1f
|
||||
#define AX_CMD_SW_RESET 0x20
|
||||
#define AX_CMD_SW_PHY_STATUS 0x21
|
||||
#define AX_CMD_SW_PHY_SELECT 0x22
|
||||
#define AX88772_CMD_READ_NODE_ID 0x13
|
||||
|
||||
#define AX_MONITOR_MODE 0x01
|
||||
#define AX_MONITOR_LINK 0x02
|
||||
#define AX_MONITOR_MAGIC 0x04
|
||||
#define AX_MONITOR_HSFS 0x10
|
||||
|
||||
/* AX88172 Medium Status Register values */
|
||||
#define AX_MEDIUM_FULL_DUPLEX 0x02
|
||||
#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
|
||||
#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
|
||||
|
||||
#define AX_MCAST_FILTER_SIZE 8
|
||||
#define AX_MAX_MCAST 64
|
||||
|
||||
#define AX_EEPROM_LEN 0x40
|
||||
|
||||
#define AX_SWRESET_CLEAR 0x00
|
||||
#define AX_SWRESET_RR 0x01
|
||||
#define AX_SWRESET_RT 0x02
|
||||
#define AX_SWRESET_PRTE 0x04
|
||||
#define AX_SWRESET_PRL 0x08
|
||||
#define AX_SWRESET_BZ 0x10
|
||||
#define AX_SWRESET_IPRL 0x20
|
||||
#define AX_SWRESET_IPPD 0x40
|
||||
|
||||
#define AX88772_IPG0_DEFAULT 0x15
|
||||
#define AX88772_IPG1_DEFAULT 0x0c
|
||||
#define AX88772_IPG2_DEFAULT 0x12
|
||||
|
||||
#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
|
||||
#define AX88772_MEDIUM_RESERVED 0x0004
|
||||
#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
|
||||
#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
|
||||
#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
|
||||
#define AX88772_MEDIUM_RX_ENABLE 0x0100
|
||||
#define AX88772_MEDIUM_100MB 0x0200
|
||||
#define AX88772_MEDIUM_DEFAULT \
|
||||
(AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
|
||||
AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
|
||||
AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
|
||||
|
||||
#define AX_EEPROM_MAGIC 0xdeadbeef
|
||||
|
||||
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
|
||||
struct ax8817x_data {
|
||||
u8 multi_filter[AX_MCAST_FILTER_SIZE];
|
||||
};
|
||||
|
||||
struct ax88172_int_data {
|
||||
u16 res1;
|
||||
u8 link;
|
||||
u16 res2;
|
||||
u8 status;
|
||||
u16 res3;
|
||||
} __attribute__ ((packed));
|
||||
|
||||
static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
|
||||
u16 size, void *data)
|
||||
{
|
||||
return usb_control_msg(
|
||||
dev->udev,
|
||||
usb_rcvctrlpipe(dev->udev, 0),
|
||||
cmd,
|
||||
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
||||
value,
|
||||
index,
|
||||
data,
|
||||
size,
|
||||
USB_CTRL_GET_TIMEOUT);
|
||||
}
|
||||
|
||||
static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
|
||||
u16 size, void *data)
|
||||
{
|
||||
return usb_control_msg(
|
||||
dev->udev,
|
||||
usb_sndctrlpipe(dev->udev, 0),
|
||||
cmd,
|
||||
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
||||
value,
|
||||
index,
|
||||
data,
|
||||
size,
|
||||
USB_CTRL_SET_TIMEOUT);
|
||||
}
|
||||
|
||||
static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
|
||||
{
|
||||
struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
|
||||
|
||||
if (urb->status < 0)
|
||||
printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
|
||||
urb->status);
|
||||
|
||||
kfree(req);
|
||||
usb_free_urb(urb);
|
||||
}
|
||||
|
||||
static void ax8817x_status(struct usbnet *dev, struct urb *urb)
|
||||
{
|
||||
struct ax88172_int_data *event;
|
||||
int link;
|
||||
|
||||
if (urb->actual_length < 8)
|
||||
return;
|
||||
|
||||
event = urb->transfer_buffer;
|
||||
link = event->link & 0x01;
|
||||
if (netif_carrier_ok(dev->net) != link) {
|
||||
if (link) {
|
||||
netif_carrier_on(dev->net);
|
||||
usbnet_defer_kevent (dev, EVENT_LINK_RESET );
|
||||
} else
|
||||
netif_carrier_off(dev->net);
|
||||
devdbg(dev, "ax8817x - Link Status is: %d", link);
|
||||
}
|
||||
}
|
||||
|
||||
static void
|
||||
ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
|
||||
u16 size, void *data)
|
||||
{
|
||||
struct usb_ctrlrequest *req;
|
||||
int status;
|
||||
struct urb *urb;
|
||||
|
||||
if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
|
||||
devdbg(dev, "Error allocating URB in write_cmd_async!");
|
||||
return;
|
||||
}
|
||||
|
||||
if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
|
||||
deverr(dev, "Failed to allocate memory for control request");
|
||||
usb_free_urb(urb);
|
||||
return;
|
||||
}
|
||||
|
||||
req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
|
||||
req->bRequest = cmd;
|
||||
req->wValue = cpu_to_le16(value);
|
||||
req->wIndex = cpu_to_le16(index);
|
||||
req->wLength = cpu_to_le16(size);
|
||||
|
||||
usb_fill_control_urb(urb, dev->udev,
|
||||
usb_sndctrlpipe(dev->udev, 0),
|
||||
(void *)req, data, size,
|
||||
ax8817x_async_cmd_callback, req);
|
||||
|
||||
if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
|
||||
deverr(dev, "Error submitting the control message: status=%d",
|
||||
status);
|
||||
kfree(req);
|
||||
usb_free_urb(urb);
|
||||
}
|
||||
}
|
||||
|
||||
static void ax8817x_set_multicast(struct net_device *net)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(net);
|
||||
struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
|
||||
u8 rx_ctl = 0x8c;
|
||||
|
||||
if (net->flags & IFF_PROMISC) {
|
||||
rx_ctl |= 0x01;
|
||||
} else if (net->flags & IFF_ALLMULTI
|
||||
|| net->mc_count > AX_MAX_MCAST) {
|
||||
rx_ctl |= 0x02;
|
||||
} else if (net->mc_count == 0) {
|
||||
/* just broadcast and directed */
|
||||
} else {
|
||||
/* We use the 20 byte dev->data
|
||||
* for our 8 byte filter buffer
|
||||
* to avoid allocating memory that
|
||||
* is tricky to free later */
|
||||
struct dev_mc_list *mc_list = net->mc_list;
|
||||
u32 crc_bits;
|
||||
int i;
|
||||
|
||||
memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
|
||||
|
||||
/* Build the multicast hash filter. */
|
||||
for (i = 0; i < net->mc_count; i++) {
|
||||
crc_bits =
|
||||
ether_crc(ETH_ALEN,
|
||||
mc_list->dmi_addr) >> 26;
|
||||
data->multi_filter[crc_bits >> 3] |=
|
||||
1 << (crc_bits & 7);
|
||||
mc_list = mc_list->next;
|
||||
}
|
||||
|
||||
ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
|
||||
AX_MCAST_FILTER_SIZE, data->multi_filter);
|
||||
|
||||
rx_ctl |= 0x10;
|
||||
}
|
||||
|
||||
ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
|
||||
}
|
||||
|
||||
static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(netdev);
|
||||
u16 res;
|
||||
u8 buf[1];
|
||||
|
||||
ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
|
||||
ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
|
||||
(__u16)loc, 2, (u16 *)&res);
|
||||
ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
|
||||
|
||||
return res & 0xffff;
|
||||
}
|
||||
|
||||
/* same as above, but converts resulting value to cpu byte order */
|
||||
static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
|
||||
{
|
||||
return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc));
|
||||
}
|
||||
|
||||
static void
|
||||
ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(netdev);
|
||||
u16 res = val;
|
||||
u8 buf[1];
|
||||
|
||||
ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
|
||||
ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
|
||||
(__u16)loc, 2, (u16 *)&res);
|
||||
ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
|
||||
}
|
||||
|
||||
/* same as above, but converts new value to le16 byte order before writing */
|
||||
static void
|
||||
ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
|
||||
{
|
||||
ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
|
||||
}
|
||||
|
||||
static int ax88172_link_reset(struct usbnet *dev)
|
||||
{
|
||||
u16 lpa;
|
||||
u16 adv;
|
||||
u16 res;
|
||||
u8 mode;
|
||||
|
||||
mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
|
||||
lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
|
||||
adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
|
||||
res = mii_nway_result(lpa|adv);
|
||||
if (res & LPA_DUPLEX)
|
||||
mode |= AX_MEDIUM_FULL_DUPLEX;
|
||||
ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(net);
|
||||
u8 opt;
|
||||
|
||||
if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
|
||||
wolinfo->supported = 0;
|
||||
wolinfo->wolopts = 0;
|
||||
return;
|
||||
}
|
||||
wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
|
||||
wolinfo->wolopts = 0;
|
||||
if (opt & AX_MONITOR_MODE) {
|
||||
if (opt & AX_MONITOR_LINK)
|
||||
wolinfo->wolopts |= WAKE_PHY;
|
||||
if (opt & AX_MONITOR_MAGIC)
|
||||
wolinfo->wolopts |= WAKE_MAGIC;
|
||||
}
|
||||
}
|
||||
|
||||
static int
|
||||
ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(net);
|
||||
u8 opt = 0;
|
||||
u8 buf[1];
|
||||
|
||||
if (wolinfo->wolopts & WAKE_PHY)
|
||||
opt |= AX_MONITOR_LINK;
|
||||
if (wolinfo->wolopts & WAKE_MAGIC)
|
||||
opt |= AX_MONITOR_MAGIC;
|
||||
if (opt != 0)
|
||||
opt |= AX_MONITOR_MODE;
|
||||
|
||||
if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
|
||||
opt, 0, 0, &buf) < 0)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ax8817x_get_eeprom_len(struct net_device *net)
|
||||
{
|
||||
return AX_EEPROM_LEN;
|
||||
}
|
||||
|
||||
static int ax8817x_get_eeprom(struct net_device *net,
|
||||
struct ethtool_eeprom *eeprom, u8 *data)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(net);
|
||||
u16 *ebuf = (u16 *)data;
|
||||
int i;
|
||||
|
||||
/* Crude hack to ensure that we don't overwrite memory
|
||||
* if an odd length is supplied
|
||||
*/
|
||||
if (eeprom->len % 2)
|
||||
return -EINVAL;
|
||||
|
||||
eeprom->magic = AX_EEPROM_MAGIC;
|
||||
|
||||
/* ax8817x returns 2 bytes from eeprom on read */
|
||||
for (i=0; i < eeprom->len / 2; i++) {
|
||||
if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
|
||||
eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ax8817x_get_drvinfo (struct net_device *net,
|
||||
struct ethtool_drvinfo *info)
|
||||
{
|
||||
/* Inherit standard device info */
|
||||
usbnet_get_drvinfo(net, info);
|
||||
info->eedump_len = 0x3e;
|
||||
}
|
||||
|
||||
static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(net);
|
||||
|
||||
return mii_ethtool_gset(&dev->mii,cmd);
|
||||
}
|
||||
|
||||
static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(net);
|
||||
|
||||
return mii_ethtool_sset(&dev->mii,cmd);
|
||||
}
|
||||
|
||||
/* We need to override some ethtool_ops so we require our
|
||||
own structure so we don't interfere with other usbnet
|
||||
devices that may be connected at the same time. */
|
||||
static struct ethtool_ops ax8817x_ethtool_ops = {
|
||||
.get_drvinfo = ax8817x_get_drvinfo,
|
||||
.get_link = ethtool_op_get_link,
|
||||
.get_msglevel = usbnet_get_msglevel,
|
||||
.set_msglevel = usbnet_set_msglevel,
|
||||
.get_wol = ax8817x_get_wol,
|
||||
.set_wol = ax8817x_set_wol,
|
||||
.get_eeprom_len = ax8817x_get_eeprom_len,
|
||||
.get_eeprom = ax8817x_get_eeprom,
|
||||
.get_settings = ax8817x_get_settings,
|
||||
.set_settings = ax8817x_set_settings,
|
||||
};
|
||||
|
||||
static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
|
||||
{
|
||||
struct usbnet *dev = netdev_priv(net);
|
||||
|
||||
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
|
||||
}
|
||||
|
||||
static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
|
||||
{
|
||||
int ret = 0;
|
||||
void *buf;
|
||||
int i;
|
||||
unsigned long gpio_bits = dev->driver_info->data;
|
||||
|
||||
usbnet_get_endpoints(dev,intf);
|
||||
|
||||
buf = kmalloc(ETH_ALEN, GFP_KERNEL);
|
||||
if(!buf) {
|
||||
ret = -ENOMEM;
|
||||
goto out1;
|
||||
}
|
||||
|
||||
/* Toggle the GPIOs in a manufacturer/model specific way */
|
||||
for (i = 2; i >= 0; i--) {
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
|
||||
(gpio_bits >> (i * 8)) & 0xff, 0, 0,
|
||||
buf)) < 0)
|
||||
goto out2;
|
||||
msleep(5);
|
||||
}
|
||||
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
|
||||
0x80, 0, 0, buf)) < 0) {
|
||||
dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
/* Get the MAC address */
|
||||
memset(buf, 0, ETH_ALEN);
|
||||
if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID,
|
||||
0, 0, 6, buf)) < 0) {
|
||||
dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
|
||||
|
||||
/* Get the PHY id */
|
||||
if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
|
||||
0, 0, 2, buf)) < 0) {
|
||||
dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
|
||||
goto out2;
|
||||
} else if (ret < 2) {
|
||||
/* this should always return 2 bytes */
|
||||
dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
|
||||
ret);
|
||||
ret = -EIO;
|
||||
goto out2;
|
||||
}
|
||||
|
||||
/* Initialize MII structure */
|
||||
dev->mii.dev = dev->net;
|
||||
dev->mii.mdio_read = ax8817x_mdio_read;
|
||||
dev->mii.mdio_write = ax8817x_mdio_write;
|
||||
dev->mii.phy_id_mask = 0x3f;
|
||||
dev->mii.reg_num_mask = 0x1f;
|
||||
dev->mii.phy_id = *((u8 *)buf + 1);
|
||||
dev->net->do_ioctl = ax8817x_ioctl;
|
||||
|
||||
dev->net->set_multicast_list = ax8817x_set_multicast;
|
||||
dev->net->ethtool_ops = &ax8817x_ethtool_ops;
|
||||
|
||||
ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
|
||||
ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
|
||||
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
|
||||
mii_nway_restart(&dev->mii);
|
||||
|
||||
return 0;
|
||||
out2:
|
||||
kfree(buf);
|
||||
out1:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct ethtool_ops ax88772_ethtool_ops = {
|
||||
.get_drvinfo = ax8817x_get_drvinfo,
|
||||
.get_link = ethtool_op_get_link,
|
||||
.get_msglevel = usbnet_get_msglevel,
|
||||
.set_msglevel = usbnet_set_msglevel,
|
||||
.get_wol = ax8817x_get_wol,
|
||||
.set_wol = ax8817x_set_wol,
|
||||
.get_eeprom_len = ax8817x_get_eeprom_len,
|
||||
.get_eeprom = ax8817x_get_eeprom,
|
||||
.get_settings = ax8817x_get_settings,
|
||||
.set_settings = ax8817x_set_settings,
|
||||
};
|
||||
|
||||
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
|
||||
{
|
||||
int ret;
|
||||
void *buf;
|
||||
|
||||
usbnet_get_endpoints(dev,intf);
|
||||
|
||||
buf = kmalloc(6, GFP_KERNEL);
|
||||
if(!buf) {
|
||||
dbg ("Cannot allocate memory for buffer");
|
||||
ret = -ENOMEM;
|
||||
goto out1;
|
||||
}
|
||||
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
|
||||
0x00B0, 0, 0, buf)) < 0)
|
||||
goto out2;
|
||||
|
||||
msleep(5);
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
|
||||
0x0001, 0, 0, buf)) < 0) {
|
||||
dbg("Select PHY #1 failed: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD,
|
||||
0, 0, buf)) < 0) {
|
||||
dbg("Failed to power down internal PHY: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
msleep(150);
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR,
|
||||
0, 0, buf)) < 0) {
|
||||
dbg("Failed to perform software reset: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
msleep(150);
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
|
||||
AX_SWRESET_IPRL | AX_SWRESET_PRL,
|
||||
0, 0, buf)) < 0) {
|
||||
dbg("Failed to set Internal/External PHY reset control: %d",
|
||||
ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
msleep(150);
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
|
||||
0x0000, 0, 0, buf)) < 0) {
|
||||
dbg("Failed to reset RX_CTL: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
/* Get the MAC address */
|
||||
memset(buf, 0, ETH_ALEN);
|
||||
if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
|
||||
0, 0, ETH_ALEN, buf)) < 0) {
|
||||
dbg("Failed to read MAC address: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
|
||||
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII,
|
||||
0, 0, 0, buf)) < 0) {
|
||||
dbg("Enabling software MII failed: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG,
|
||||
0x0010, 2, 2, buf)) < 0)
|
||||
|| (*((u16 *)buf) != 0x003b)) {
|
||||
dbg("Read PHY register 2 must be 0x3b00: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
/* Initialize MII structure */
|
||||
dev->mii.dev = dev->net;
|
||||
dev->mii.mdio_read = ax8817x_mdio_read;
|
||||
dev->mii.mdio_write = ax8817x_mdio_write;
|
||||
dev->mii.phy_id_mask = 0xff;
|
||||
dev->mii.reg_num_mask = 0xff;
|
||||
dev->net->do_ioctl = ax8817x_ioctl;
|
||||
|
||||
/* Get the PHY id */
|
||||
if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
|
||||
0, 0, 2, buf)) < 0) {
|
||||
dbg("Error reading PHY ID: %02x", ret);
|
||||
goto out2;
|
||||
} else if (ret < 2) {
|
||||
/* this should always return 2 bytes */
|
||||
dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
|
||||
ret);
|
||||
ret = -EIO;
|
||||
goto out2;
|
||||
}
|
||||
dev->mii.phy_id = *((u8 *)buf + 1);
|
||||
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL,
|
||||
0, 0, buf)) < 0) {
|
||||
dbg("Set external PHY reset pin level: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
msleep(150);
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
|
||||
AX_SWRESET_IPRL | AX_SWRESET_PRL,
|
||||
0, 0, buf)) < 0) {
|
||||
dbg("Set Internal/External PHY reset control: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
msleep(150);
|
||||
|
||||
|
||||
dev->net->set_multicast_list = ax8817x_set_multicast;
|
||||
dev->net->ethtool_ops = &ax88772_ethtool_ops;
|
||||
|
||||
ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
|
||||
ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
|
||||
ADVERTISE_ALL | ADVERTISE_CSMA);
|
||||
mii_nway_restart(&dev->mii);
|
||||
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
|
||||
AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
|
||||
dbg("Write medium mode register: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0,
|
||||
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
|
||||
AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
|
||||
dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
if ((ret =
|
||||
ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
|
||||
dbg("Failed to set hardware MII: %02x", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
|
||||
if ((ret =
|
||||
ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
|
||||
buf)) < 0) {
|
||||
dbg("Reset RX_CTL failed: %d", ret);
|
||||
goto out2;
|
||||
}
|
||||
|
||||
kfree(buf);
|
||||
|
||||
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
|
||||
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
|
||||
/* hard_mtu is still the default - the device does not support
|
||||
jumbo eth frames */
|
||||
dev->rx_urb_size = 2048;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
out2:
|
||||
kfree(buf);
|
||||
out1:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
||||
{
|
||||
u8 *head;
|
||||
u32 header;
|
||||
char *packet;
|
||||
struct sk_buff *ax_skb;
|
||||
u16 size;
|
||||
|
||||
head = (u8 *) skb->data;
|
||||
memcpy(&header, head, sizeof(header));
|
||||
le32_to_cpus(&header);
|
||||
packet = head + sizeof(header);
|
||||
|
||||
skb_pull(skb, 4);
|
||||
|
||||
while (skb->len > 0) {
|
||||
if ((short)(header & 0x0000ffff) !=
|
||||
~((short)((header & 0xffff0000) >> 16))) {
|
||||
devdbg(dev,"header length data is error");
|
||||
}
|
||||
/* get the packet length */
|
||||
size = (u16) (header & 0x0000ffff);
|
||||
|
||||
if ((skb->len) - ((size + 1) & 0xfffe) == 0)
|
||||
return 2;
|
||||
if (size > ETH_FRAME_LEN) {
|
||||
devdbg(dev,"invalid rx length %d", size);
|
||||
return 0;
|
||||
}
|
||||
ax_skb = skb_clone(skb, GFP_ATOMIC);
|
||||
if (ax_skb) {
|
||||
ax_skb->len = size;
|
||||
ax_skb->data = packet;
|
||||
ax_skb->tail = packet + size;
|
||||
usbnet_skb_return(dev, ax_skb);
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
|
||||
skb_pull(skb, (size + 1) & 0xfffe);
|
||||
|
||||
if (skb->len == 0)
|
||||
break;
|
||||
|
||||
head = (u8 *) skb->data;
|
||||
memcpy(&header, head, sizeof(header));
|
||||
le32_to_cpus(&header);
|
||||
packet = head + sizeof(header);
|
||||
skb_pull(skb, 4);
|
||||
}
|
||||
|
||||
if (skb->len < 0) {
|
||||
devdbg(dev,"invalid rx length %d", skb->len);
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
|
||||
unsigned flags)
|
||||
{
|
||||
int padlen;
|
||||
int headroom = skb_headroom(skb);
|
||||
int tailroom = skb_tailroom(skb);
|
||||
u32 packet_len;
|
||||
u32 padbytes = 0xffff0000;
|
||||
|
||||
padlen = ((skb->len + 4) % 512) ? 0 : 4;
|
||||
|
||||
if ((!skb_cloned(skb))
|
||||
&& ((headroom + tailroom) >= (4 + padlen))) {
|
||||
if ((headroom < 4) || (tailroom < padlen)) {
|
||||
skb->data = memmove(skb->head + 4, skb->data, skb->len);
|
||||
skb->tail = skb->data + skb->len;
|
||||
}
|
||||
} else {
|
||||
struct sk_buff *skb2;
|
||||
skb2 = skb_copy_expand(skb, 4, padlen, flags);
|
||||
dev_kfree_skb_any(skb);
|
||||
skb = skb2;
|
||||
if (!skb)
|
||||
return NULL;
|
||||
}
|
||||
|
||||
skb_push(skb, 4);
|
||||
packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
|
||||
memcpy(skb->data, &packet_len, sizeof(packet_len));
|
||||
|
||||
if ((skb->len % 512) == 0) {
|
||||
memcpy( skb->tail, &padbytes, sizeof(padbytes));
|
||||
skb_put(skb, sizeof(padbytes));
|
||||
}
|
||||
return skb;
|
||||
}
|
||||
|
||||
static int ax88772_link_reset(struct usbnet *dev)
|
||||
{
|
||||
u16 lpa;
|
||||
u16 adv;
|
||||
u16 res;
|
||||
u16 mode;
|
||||
|
||||
mode = AX88772_MEDIUM_DEFAULT;
|
||||
lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
|
||||
adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
|
||||
res = mii_nway_result(lpa|adv);
|
||||
|
||||
if ((res & LPA_DUPLEX) == 0)
|
||||
mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
|
||||
if ((res & LPA_100) == 0)
|
||||
mode &= ~AX88772_MEDIUM_100MB;
|
||||
ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct driver_info ax8817x_info = {
|
||||
.description = "ASIX AX8817x USB 2.0 Ethernet",
|
||||
.bind = ax8817x_bind,
|
||||
.status = ax8817x_status,
|
||||
.link_reset = ax88172_link_reset,
|
||||
.reset = ax88172_link_reset,
|
||||
.flags = FLAG_ETHER,
|
||||
.data = 0x00130103,
|
||||
};
|
||||
|
||||
static const struct driver_info dlink_dub_e100_info = {
|
||||
.description = "DLink DUB-E100 USB Ethernet",
|
||||
.bind = ax8817x_bind,
|
||||
.status = ax8817x_status,
|
||||
.link_reset = ax88172_link_reset,
|
||||
.reset = ax88172_link_reset,
|
||||
.flags = FLAG_ETHER,
|
||||
.data = 0x009f9d9f,
|
||||
};
|
||||
|
||||
static const struct driver_info netgear_fa120_info = {
|
||||
.description = "Netgear FA-120 USB Ethernet",
|
||||
.bind = ax8817x_bind,
|
||||
.status = ax8817x_status,
|
||||
.link_reset = ax88172_link_reset,
|
||||
.reset = ax88172_link_reset,
|
||||
.flags = FLAG_ETHER,
|
||||
.data = 0x00130103,
|
||||
};
|
||||
|
||||
static const struct driver_info hawking_uf200_info = {
|
||||
.description = "Hawking UF200 USB Ethernet",
|
||||
.bind = ax8817x_bind,
|
||||
.status = ax8817x_status,
|
||||
.link_reset = ax88172_link_reset,
|
||||
.reset = ax88172_link_reset,
|
||||
.flags = FLAG_ETHER,
|
||||
.data = 0x001f1d1f,
|
||||
};
|
||||
|
||||
static const struct driver_info ax88772_info = {
|
||||
.description = "ASIX AX88772 USB 2.0 Ethernet",
|
||||
.bind = ax88772_bind,
|
||||
.status = ax8817x_status,
|
||||
.link_reset = ax88772_link_reset,
|
||||
.reset = ax88772_link_reset,
|
||||
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
|
||||
.rx_fixup = ax88772_rx_fixup,
|
||||
.tx_fixup = ax88772_tx_fixup,
|
||||
.data = 0x00130103,
|
||||
};
|
||||
|
||||
static const struct usb_device_id products [] = {
|
||||
{
|
||||
// Linksys USB200M
|
||||
USB_DEVICE (0x077b, 0x2226),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// Netgear FA120
|
||||
USB_DEVICE (0x0846, 0x1040),
|
||||
.driver_info = (unsigned long) &netgear_fa120_info,
|
||||
}, {
|
||||
// DLink DUB-E100
|
||||
USB_DEVICE (0x2001, 0x1a00),
|
||||
.driver_info = (unsigned long) &dlink_dub_e100_info,
|
||||
}, {
|
||||
// Intellinet, ST Lab USB Ethernet
|
||||
USB_DEVICE (0x0b95, 0x1720),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// Hawking UF200, TrendNet TU2-ET100
|
||||
USB_DEVICE (0x07b8, 0x420a),
|
||||
.driver_info = (unsigned long) &hawking_uf200_info,
|
||||
}, {
|
||||
// Billionton Systems, USB2AR
|
||||
USB_DEVICE (0x08dd, 0x90ff),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// ATEN UC210T
|
||||
USB_DEVICE (0x0557, 0x2009),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// Buffalo LUA-U2-KTX
|
||||
USB_DEVICE (0x0411, 0x003d),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
|
||||
USB_DEVICE (0x6189, 0x182d),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// corega FEther USB2-TX
|
||||
USB_DEVICE (0x07aa, 0x0017),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// Surecom EP-1427X-2
|
||||
USB_DEVICE (0x1189, 0x0893),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// goodway corp usb gwusb2e
|
||||
USB_DEVICE (0x1631, 0x6200),
|
||||
.driver_info = (unsigned long) &ax8817x_info,
|
||||
}, {
|
||||
// ASIX AX88772 10/100
|
||||
USB_DEVICE (0x0b95, 0x7720),
|
||||
.driver_info = (unsigned long) &ax88772_info,
|
||||
},
|
||||
{ }, // END
|
||||
};
|
||||
MODULE_DEVICE_TABLE(usb, products);
|
||||
|
||||
static struct usb_driver asix_driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "asix",
|
||||
.id_table = products,
|
||||
.probe = usbnet_probe,
|
||||
.suspend = usbnet_suspend,
|
||||
.resume = usbnet_resume,
|
||||
.disconnect = usbnet_disconnect,
|
||||
};
|
||||
|
||||
static int __init asix_init(void)
|
||||
{
|
||||
return usb_register(&asix_driver);
|
||||
}
|
||||
module_init(asix_init);
|
||||
|
||||
static void __exit asix_exit(void)
|
||||
{
|
||||
usb_deregister(&asix_driver);
|
||||
}
|
||||
module_exit(asix_exit);
|
||||
|
||||
MODULE_AUTHOR("David Hollis");
|
||||
MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
File diff suppressed because it is too large
Load Diff
|
@ -44,6 +44,7 @@ struct usbnet {
|
|||
unsigned long data [5];
|
||||
u32 xid;
|
||||
u32 hard_mtu; /* count any extra framing */
|
||||
size_t rx_urb_size; /* size for rx urbs */
|
||||
struct mii_if_info mii;
|
||||
|
||||
/* various kinds of pending driver work */
|
||||
|
@ -140,6 +141,13 @@ struct skb_data { /* skb->cb is one of these */
|
|||
};
|
||||
|
||||
|
||||
extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
|
||||
extern void usbnet_defer_kevent (struct usbnet *, int);
|
||||
extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
|
||||
|
||||
extern u32 usbnet_get_msglevel (struct net_device *);
|
||||
extern void usbnet_set_msglevel (struct net_device *, u32);
|
||||
extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
|
||||
|
||||
/* messaging support includes the interface name, so it must not be
|
||||
* used before it has one ... notably, in minidriver bind() calls.
|
||||
|
|
Loading…
Reference in New Issue