[SCSI] lpfc 8.3.20: Implement new SLI4 init procedures based on if_type

Implement new SLI4 init procedures based on if_type:

- Add structure changes for new SLIPORT registers and BAR changes.
- Update register names to be consistent with inteface spec terms.
- Added union to encapsulate Hardward error registers.
- Rework lpfc_sli4_post_status_check() around SLI-4's SLI_INTF type
- Removed the lpfc_sli4_fw_cfg_check routine
- Segmented driver logic to include evaluation of the if_type to
  engage different behaviors.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This commit is contained in:
James Smart 2010-12-15 17:57:46 -05:00 committed by James Bottomley
parent 70f3c07336
commit 2fcee4bf87
4 changed files with 568 additions and 325 deletions

View File

@ -460,42 +460,41 @@ struct lpfc_register {
uint32_t word0;
};
/* The SLI4 INTF register offset is common to all if_type values. */
#define LPFC_SLI_INTF 0x0058
/* The following BAR0 Registers apply to SLI4 if_type 0 UCNAs. */
#define LPFC_UERR_STATUS_HI 0x00A4
#define LPFC_UERR_STATUS_LO 0x00A0
#define LPFC_UE_MASK_HI 0x00AC
#define LPFC_UE_MASK_LO 0x00A8
#define LPFC_HST_STATE 0x00AC
#define lpfc_hst_state_perr_SHIFT 31
#define lpfc_hst_state_perr_MASK 0x1
#define lpfc_hst_state_perr_WORD word0
#define lpfc_hst_state_sfi_SHIFT 30
#define lpfc_hst_state_sfi_MASK 0x1
#define lpfc_hst_state_sfi_WORD word0
#define lpfc_hst_state_nip_SHIFT 29
#define lpfc_hst_state_nip_MASK 0x1
#define lpfc_hst_state_nip_WORD word0
#define lpfc_hst_state_ipc_SHIFT 28
#define lpfc_hst_state_ipc_MASK 0x1
#define lpfc_hst_state_ipc_WORD word0
#define lpfc_hst_state_xrom_SHIFT 27
#define lpfc_hst_state_xrom_MASK 0x1
#define lpfc_hst_state_xrom_WORD word0
#define lpfc_hst_state_dl_SHIFT 26
#define lpfc_hst_state_dl_MASK 0x1
#define lpfc_hst_state_dl_WORD word0
#define lpfc_hst_state_port_status_SHIFT 0
#define lpfc_hst_state_port_status_MASK 0xFFFF
#define lpfc_hst_state_port_status_WORD word0
/* The following BAR0 register sets are defined for if_type 0 and 2 UCNAs. */
#define LPFC_SLI_INTF 0x0058
#define LPFC_SLIPORT_IF2_SMPHR 0x0400
#define lpfc_port_smphr_perr_SHIFT 31
#define lpfc_port_smphr_perr_MASK 0x1
#define lpfc_port_smphr_perr_WORD word0
#define lpfc_port_smphr_sfi_SHIFT 30
#define lpfc_port_smphr_sfi_MASK 0x1
#define lpfc_port_smphr_sfi_WORD word0
#define lpfc_port_smphr_nip_SHIFT 29
#define lpfc_port_smphr_nip_MASK 0x1
#define lpfc_port_smphr_nip_WORD word0
#define lpfc_port_smphr_ipc_SHIFT 28
#define lpfc_port_smphr_ipc_MASK 0x1
#define lpfc_port_smphr_ipc_WORD word0
#define lpfc_port_smphr_scr1_SHIFT 27
#define lpfc_port_smphr_scr1_MASK 0x1
#define lpfc_port_smphr_scr1_WORD word0
#define lpfc_port_smphr_scr2_SHIFT 26
#define lpfc_port_smphr_scr2_MASK 0x1
#define lpfc_port_smphr_scr2_WORD word0
#define lpfc_port_smphr_host_scratch_SHIFT 16
#define lpfc_port_smphr_host_scratch_MASK 0xFF
#define lpfc_port_smphr_host_scratch_WORD word0
#define lpfc_port_smphr_port_status_SHIFT 0
#define lpfc_port_smphr_port_status_MASK 0xFFFF
#define lpfc_port_smphr_port_status_WORD word0
/*
* The following Port Status Values apply to SLI4, if_type 0 and 2
* UCNAs.
*/
#define LPFC_POST_STAGE_POWER_ON_RESET 0x0000
#define LPFC_POST_STAGE_AWAITING_HOST_RDY 0x0001
#define LPFC_POST_STAGE_HOST_RDY 0x0002
@ -527,36 +526,8 @@ struct lpfc_register {
#define LPFC_POST_STAGE_RC_DONE 0x0B07
#define LPFC_POST_STAGE_REBOOT_SYSTEM 0x0B08
#define LPFC_POST_STAGE_MAC_ADDRESS 0x0C00
#define LPFC_POST_STAGE_ARMFW_READY 0xC000
#define LPFC_POST_STAGE_ARMFW_UE 0xF000
/* The following BAR0 register sets are defined for if_type 2 UCNAs. */
#define LPFC_SLIPORT_SEMAPHORE 0x0400
#define lpfc_sliport_smphr_perr_SHIFT 31
#define lpfc_sliport_smphr_perr_MASK 0x1
#define lpfc_sliport_smphr_perr_WORD word0
#define lpfc_sliport_smphr_sfi_SHIFT 30
#define lpfc_sliport_smphr_sfi_MASK 0x1
#define lpfc_sliport_smphr_sfi_WORD word0
#define lpfc_sliport_smphr_nip_SHIFT 29
#define lpfc_sliport_smphr_nip_MASK 0x1
#define lpfc_sliport_smphr_nip_WORD word0
#define lpfc_sliport_smphr_ipc_SHIFT 28
#define lpfc_sliport_smphr_ipc_MASK 0x1
#define lpfc_sliport_smphr_ipc_WORD word0
#define lpfc_sliport_smphr_scr1_SHIFT 27
#define lpfc_sliport_smphr_scr1_MASK 0x1
#define lpfc_sliport_smphr_scr1_WORD word0
#define lpfc_sliport_smphr_scr2_SHIFT 26
#define lpfc_sliport_smphr_scr2_MASK 0x1
#define lpfc_sliport_smphr_scr2_WORD word0
#define lpfc_sliport_smphr_host_scratch_SHIFT 16
#define lpfc_sliport_smphr_host_scratch_MASK 0xFF
#define lpfc_sliport_smphr_host_scratch_WORD word0
#define lpfc_sliport_smphr_port_status_SHIFT 0
#define lpfc_sliport_smphr_port_status_MASK 0xFFFF
#define lpfc_sliport_smphr_port_status_WORD word0
#define LPFC_POST_STAGE_PORT_READY 0xC000
#define LPFC_POST_STAGE_PORT_UE 0xF000
#define LPFC_SLIPORT_STATUS 0x0404
#define lpfc_sliport_status_err_SHIFT 31
@ -574,8 +545,9 @@ struct lpfc_register {
#define lpfc_sliport_status_rdy_SHIFT 23
#define lpfc_sliport_status_rdy_MASK 0x1
#define lpfc_sliport_status_rdy_WORD word0
#define MAX_IF_TYPE_2_RESETS 1000
#define LPFC_SLIPORT_CONTROL 0x0408
#define LPFC_SLIPORT_CNTRL 0x0408
#define lpfc_sliport_ctrl_end_SHIFT 30
#define lpfc_sliport_ctrl_end_MASK 0x1
#define lpfc_sliport_ctrl_end_WORD word0
@ -584,11 +556,16 @@ struct lpfc_register {
#define lpfc_sliport_ctrl_ip_SHIFT 27
#define lpfc_sliport_ctrl_ip_MASK 0x1
#define lpfc_sliport_ctrl_ip_WORD word0
#define LPFC_SLIPORT_INIT_PORT 1
#define LPFC_SLIPORT_ERROR_1 0x040C
#define LPFC_SLIPORT_ERROR_2 0x0410
#define LPFC_SLIPORT_ERR_1 0x040C
#define LPFC_SLIPORT_ERR_2 0x0410
/* The following Registers apply to SLI4 if_type 0 UCNAs. They typically
* reside in BAR 2.
*/
#define LPFC_SLIPORT_IF0_SMPHR 0x00AC
/* BAR1 Registers */
#define LPFC_IMR_MASK_ALL 0xFFFFFFFF
#define LPFC_ISCR_CLEAR_ALL 0xFFFFFFFF
@ -647,7 +624,7 @@ struct lpfc_register {
* The Doorbell registers defined here exist in different BAR
* register sets depending on the UCNA Port's reported if_type
* value. For UCNA ports running SLI4 and if_type 0, they reside in
* BAR2. For UCNA ports running SLI4 and if_type 2, they reside in
* BAR4. For UCNA ports running SLI4 and if_type 2, they reside in
* BAR0. The offsets are the same so the driver must account for
* any base address difference.
*/
@ -2378,7 +2355,7 @@ struct wqe_common {
#define wqe_rcvoxid_WORD word9
uint32_t word10;
#define wqe_ebde_cnt_SHIFT 0
#define wqe_ebde_cnt_MASK 0x00000007
#define wqe_ebde_cnt_MASK 0x0000000f
#define wqe_ebde_cnt_WORD word10
#define wqe_lenloc_SHIFT 7
#define wqe_lenloc_MASK 0x00000003
@ -2570,7 +2547,6 @@ struct xmit_seq64_wqe {
uint32_t relative_offset;
struct wqe_rctl_dfctl wge_ctl;
struct wqe_common wqe_com; /* words 6-11 */
/* Note: word10 different REVISIT */
uint32_t xmit_len;
uint32_t rsvd_12_15[3];
};

View File

@ -1406,6 +1406,8 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
struct lpfc_vport *vport = phba->pport;
uint32_t event_data;
struct Scsi_Host *shost;
uint32_t if_type;
struct lpfc_register portstat_reg;
/* If the pci channel is offline, ignore possible errors, since
* we cannot communicate with the pci card anyway.
@ -1422,17 +1424,49 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
/* For now, the actual action for SLI4 device handling is not
* specified yet, just treated it as adaptor hardware failure
*/
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
phba->work_status[0], phba->work_status[1]);
event_data = FC_REG_DUMP_EVENT;
shost = lpfc_shost_from_vport(vport);
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(event_data), (char *) &event_data,
SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
lpfc_sli4_offline_eratt(phba);
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
case LPFC_SLI_INTF_IF_TYPE_0:
lpfc_sli4_offline_eratt(phba);
break;
case LPFC_SLI_INTF_IF_TYPE_2:
portstat_reg.word0 =
readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
/* TODO: Register for Overtemp async events. */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2889 Port Overtemperature event, "
"taking port\n");
spin_lock_irq(&phba->hbalock);
phba->over_temp_state = HBA_OVER_TEMP;
spin_unlock_irq(&phba->hbalock);
lpfc_sli4_offline_eratt(phba);
return;
}
if (bf_get(lpfc_sliport_status_rn, &portstat_reg)) {
/*
* TODO: Attempt port recovery via a port reset.
* When fully implemented, the driver should
* attempt to recover the port here and return.
* For now, log an error and take the port offline.
*/
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2887 Port Error: Attempting "
"Port Recovery\n");
}
lpfc_sli4_offline_eratt(phba);
break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
break;
}
}
/**
@ -2982,63 +3016,6 @@ lpfc_sli4_fcf_redisc_wait_tmo(unsigned long ptr)
lpfc_worker_wake_up(phba);
}
/**
* lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
* @phba: pointer to lpfc hba data structure.
*
* This function uses the QUERY_FW_CFG mailbox command to determine if the
* firmware loaded supports FCoE. A return of zero indicates that the mailbox
* was successful and the firmware supports FCoE. Any other return indicates
* a error. It is assumed that this function will be called before interrupts
* are enabled.
**/
static int
lpfc_sli4_fw_cfg_check(struct lpfc_hba *phba)
{
int rc = 0;
LPFC_MBOXQ_t *mboxq;
struct lpfc_mbx_query_fw_cfg *query_fw_cfg;
uint32_t length;
uint32_t shdr_status, shdr_add_status;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2621 Failed to allocate mbox for "
"query firmware config cmd\n");
return -ENOMEM;
}
query_fw_cfg = &mboxq->u.mqe.un.query_fw_cfg;
length = (sizeof(struct lpfc_mbx_query_fw_cfg) -
sizeof(struct lpfc_sli4_cfg_mhdr));
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_QUERY_FW_CFG,
length, LPFC_SLI4_MBX_EMBED);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
/* The IOCTL status is embedded in the mailbox subheader. */
shdr_status = bf_get(lpfc_mbox_hdr_status,
&query_fw_cfg->header.cfg_shdr.response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
&query_fw_cfg->header.cfg_shdr.response);
if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2622 Query Firmware Config failed "
"mbx status x%x, status x%x add_status x%x\n",
rc, shdr_status, shdr_add_status);
return -EINVAL;
}
if (!bf_get(lpfc_function_mode_fcoe_i, query_fw_cfg)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2623 FCoE Function not supported by firmware. "
"Function mode = %08x\n",
query_fw_cfg->function_mode);
return -EINVAL;
}
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
return 0;
}
/**
* lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
* @phba: pointer to lpfc hba data structure.
@ -4268,6 +4245,14 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
if (rc)
return -ENOMEM;
/* IF Type 2 ports get initialized now. */
if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
LPFC_SLI_INTF_IF_TYPE_2) {
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc))
return -ENODEV;
}
/* Create the bootstrap mailbox command */
rc = lpfc_create_bootstrap_mbox(phba);
if (unlikely(rc))
@ -4278,19 +4263,18 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
if (unlikely(rc))
goto out_free_bsmbx;
rc = lpfc_sli4_fw_cfg_check(phba);
if (unlikely(rc))
goto out_free_bsmbx;
/* Set up the hba's configuration parameters. */
rc = lpfc_sli4_read_config(phba);
if (unlikely(rc))
goto out_free_bsmbx;
/* Perform a function reset */
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc))
goto out_free_bsmbx;
/* IF Type 0 ports get initialized now. */
if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
LPFC_SLI_INTF_IF_TYPE_0) {
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc))
goto out_free_bsmbx;
}
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
GFP_KERNEL);
@ -5388,49 +5372,51 @@ lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
int
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg;
int i, port_error = -ENODEV;
struct lpfc_register portsmphr_reg, uerrlo_reg, uerrhi_reg;
struct lpfc_register reg_data;
int i, port_error = 0;
uint32_t if_type;
if (!phba->sli4_hba.STAregaddr)
if (!phba->sli4_hba.PSMPHRregaddr)
return -ENODEV;
/* Wait up to 30 seconds for the SLI Port POST done and ready */
for (i = 0; i < 3000; i++) {
sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
/* Encounter fatal POST error, break out */
if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
portsmphr_reg.word0 = readl(phba->sli4_hba.PSMPHRregaddr);
if (bf_get(lpfc_port_smphr_perr, &portsmphr_reg)) {
/* Port has a fatal POST error, break out */
port_error = -ENODEV;
break;
}
if (LPFC_POST_STAGE_ARMFW_READY ==
bf_get(lpfc_hst_state_port_status, &sta_reg)) {
port_error = 0;
if (LPFC_POST_STAGE_PORT_READY ==
bf_get(lpfc_port_smphr_port_status, &portsmphr_reg))
break;
}
msleep(10);
}
if (port_error)
/*
* If there was a port error during POST, then don't proceed with
* other register reads as the data may not be valid. Just exit.
*/
if (port_error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1408 Failure HBA POST Status: sta_reg=0x%x, "
"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
"dl=x%x, pstatus=x%x\n", sta_reg.word0,
bf_get(lpfc_hst_state_perr, &sta_reg),
bf_get(lpfc_hst_state_sfi, &sta_reg),
bf_get(lpfc_hst_state_nip, &sta_reg),
bf_get(lpfc_hst_state_ipc, &sta_reg),
bf_get(lpfc_hst_state_xrom, &sta_reg),
bf_get(lpfc_hst_state_dl, &sta_reg),
bf_get(lpfc_hst_state_port_status, &sta_reg));
/* Log device information */
phba->sli4_hba.sli_intf.word0 = readl(phba->sli4_hba.SLIINTFregaddr);
if (bf_get(lpfc_sli_intf_valid,
&phba->sli4_hba.sli_intf) == LPFC_SLI_INTF_VALID) {
"1408 Port Failed POST - portsmphr=0x%x, "
"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, scr1=x%x, "
"scr2=x%x, hscratch=x%x, pstatus=x%x\n",
portsmphr_reg.word0,
bf_get(lpfc_port_smphr_perr, &portsmphr_reg),
bf_get(lpfc_port_smphr_sfi, &portsmphr_reg),
bf_get(lpfc_port_smphr_nip, &portsmphr_reg),
bf_get(lpfc_port_smphr_ipc, &portsmphr_reg),
bf_get(lpfc_port_smphr_scr1, &portsmphr_reg),
bf_get(lpfc_port_smphr_scr2, &portsmphr_reg),
bf_get(lpfc_port_smphr_host_scratch, &portsmphr_reg),
bf_get(lpfc_port_smphr_port_status, &portsmphr_reg));
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
"IFType=0x%x, SLIHint_1=0x%x, SLIHint_2=0x%x, "
"FT=0x%x\n",
"2534 Device Info: SLIFamily=0x%x, "
"SLIRev=0x%x, IFType=0x%x, SLIHint_1=0x%x, "
"SLIHint_2=0x%x, FT=0x%x\n",
bf_get(lpfc_sli_intf_sli_family,
&phba->sli4_hba.sli_intf),
bf_get(lpfc_sli_intf_slirev,
@ -5443,48 +5429,126 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
&phba->sli4_hba.sli_intf),
bf_get(lpfc_sli_intf_func_type,
&phba->sli4_hba.sli_intf));
/*
* Check for other Port errors during the initialization
* process. Fail the load if the port did not come up
* correctly.
*/
if_type = bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf);
switch (if_type) {
case LPFC_SLI_INTF_IF_TYPE_0:
phba->sli4_hba.ue_mask_lo =
readl(phba->sli4_hba.u.if_type0.UEMASKLOregaddr);
phba->sli4_hba.ue_mask_hi =
readl(phba->sli4_hba.u.if_type0.UEMASKHIregaddr);
uerrlo_reg.word0 =
readl(phba->sli4_hba.u.if_type0.UERRLOregaddr);
uerrhi_reg.word0 =
readl(phba->sli4_hba.u.if_type0.UERRHIregaddr);
if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
(~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1422 Unrecoverable Error "
"Detected during POST "
"uerr_lo_reg=0x%x, "
"uerr_hi_reg=0x%x, "
"ue_mask_lo_reg=0x%x, "
"ue_mask_hi_reg=0x%x\n",
uerrlo_reg.word0,
uerrhi_reg.word0,
phba->sli4_hba.ue_mask_lo,
phba->sli4_hba.ue_mask_hi);
port_error = -ENODEV;
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
/* Final checks. The port status should be clean. */
reg_data.word0 =
readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
if (bf_get(lpfc_sliport_status_err, &reg_data)) {
phba->work_status[0] =
readl(phba->sli4_hba.u.if_type2.
ERR1regaddr);
phba->work_status[1] =
readl(phba->sli4_hba.u.if_type2.
ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2888 Port Error Detected "
"during POST: "
"port status reg 0x%x, "
"port_smphr reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
reg_data.word0,
portsmphr_reg.word0,
phba->work_status[0],
phba->work_status[1]);
port_error = -ENODEV;
}
break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
break;
}
}
phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
/* With uncoverable error, log the error message and return error */
uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
(~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1422 HBA Unrecoverable error: "
"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
"ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
uerrlo_reg.word0, uerrhi_reg.word0,
phba->sli4_hba.ue_mask_lo,
phba->sli4_hba.ue_mask_hi);
return -ENODEV;
}
return port_error;
}
/**
* lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
* @phba: pointer to lpfc hba data structure.
* @if_type: The SLI4 interface type getting configured.
*
* This routine is invoked to set up SLI4 BAR0 PCI config space register
* memory map.
**/
static void
lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
{
phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UERR_STATUS_LO;
phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UERR_STATUS_HI;
phba->sli4_hba.UEMASKLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UE_MASK_LO;
phba->sli4_hba.UEMASKHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UE_MASK_HI;
phba->sli4_hba.SLIINTFregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_SLI_INTF;
switch (if_type) {
case LPFC_SLI_INTF_IF_TYPE_0:
phba->sli4_hba.u.if_type0.UERRLOregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_LO;
phba->sli4_hba.u.if_type0.UERRHIregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_HI;
phba->sli4_hba.u.if_type0.UEMASKLOregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_LO;
phba->sli4_hba.u.if_type0.UEMASKHIregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_HI;
phba->sli4_hba.SLIINTFregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
break;
case LPFC_SLI_INTF_IF_TYPE_2:
phba->sli4_hba.u.if_type2.ERR1regaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_1;
phba->sli4_hba.u.if_type2.ERR2regaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_2;
phba->sli4_hba.u.if_type2.CTRLregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_CNTRL;
phba->sli4_hba.u.if_type2.STATUSregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_STATUS;
phba->sli4_hba.SLIINTFregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
phba->sli4_hba.PSMPHRregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_IF2_SMPHR;
phba->sli4_hba.RQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_RQ_DOORBELL;
phba->sli4_hba.WQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_WQ_DOORBELL;
phba->sli4_hba.EQCQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_EQCQ_DOORBELL;
phba->sli4_hba.MQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_MQ_DOORBELL;
phba->sli4_hba.BMBXregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
dev_printk(KERN_ERR, &phba->pcidev->dev,
"FATAL - unsupported SLI4 interface type - %d\n",
if_type);
break;
}
}
/**
@ -5497,16 +5561,14 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
static void
lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
{
phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_STATE;
phba->sli4_hba.PSMPHRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_SLIPORT_IF0_SMPHR;
phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_ISR0;
LPFC_HST_ISR0;
phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_IMR0;
LPFC_HST_IMR0;
phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
LPFC_HST_ISCR0;
return;
LPFC_HST_ISCR0;
}
/**
@ -5746,11 +5808,12 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
}
/**
* lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
* lpfc_setup_endian_order - Write endian order to an SLI4 if_type 0 port.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to setup the host-side endian order to the
* HBA consistent with the SLI-4 interface spec.
* This routine is invoked to setup the port-side endian order when
* the port if_type is 0. This routine has no function for other
* if_types.
*
* Return codes
* 0 - successful
@ -5761,34 +5824,44 @@ static int
lpfc_setup_endian_order(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *mboxq;
uint32_t rc = 0;
uint32_t if_type, rc = 0;
uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
HOST_ENDIAN_HIGH_WORD1};
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0492 Unable to allocate memory for issuing "
"SLI_CONFIG_SPECIAL mailbox command\n");
return -ENOMEM;
}
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
case LPFC_SLI_INTF_IF_TYPE_0:
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0492 Unable to allocate memory for "
"issuing SLI_CONFIG_SPECIAL mailbox "
"command\n");
return -ENOMEM;
}
/*
* The SLI4_CONFIG_SPECIAL mailbox command requires the first two
* words to contain special data values and no other data.
*/
memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0493 SLI_CONFIG_SPECIAL mailbox failed with "
"status x%x\n",
rc);
rc = -EIO;
/*
* The SLI4_CONFIG_SPECIAL mailbox command requires the first
* two words to contain special data values and no other data.
*/
memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0493 SLI_CONFIG_SPECIAL mailbox "
"failed with status x%x\n",
rc);
rc = -EIO;
}
mempool_free(mboxq, phba->mbox_mem_pool);
break;
case LPFC_SLI_INTF_IF_TYPE_2:
case LPFC_SLI_INTF_IF_TYPE_1:
default:
break;
}
mempool_free(mboxq, phba->mbox_mem_pool);
return rc;
}
@ -6620,36 +6693,124 @@ int
lpfc_pci_function_reset(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *mboxq;
uint32_t rc = 0;
uint32_t rc = 0, if_type;
uint32_t shdr_status, shdr_add_status;
uint32_t rdy_chk, num_resets = 0, reset_again = 0;
union lpfc_sli4_cfg_shdr *shdr;
struct lpfc_register reg_data;
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0494 Unable to allocate memory for issuing "
"SLI_FUNCTION_RESET mailbox command\n");
return -ENOMEM;
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
case LPFC_SLI_INTF_IF_TYPE_0:
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
GFP_KERNEL);
if (!mboxq) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0494 Unable to allocate memory for "
"issuing SLI_FUNCTION_RESET mailbox "
"command\n");
return -ENOMEM;
}
/* Setup PCI function reset mailbox-ioctl command */
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
LPFC_SLI4_MBX_EMBED);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
shdr = (union lpfc_sli4_cfg_shdr *)
&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
&shdr->response);
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
if (shdr_status || shdr_add_status || rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0495 SLI_FUNCTION_RESET mailbox "
"failed with status x%x add_status x%x,"
" mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
for (num_resets = 0;
num_resets < MAX_IF_TYPE_2_RESETS;
num_resets++) {
reg_data.word0 = 0;
bf_set(lpfc_sliport_ctrl_end, &reg_data,
LPFC_SLIPORT_LITTLE_ENDIAN);
bf_set(lpfc_sliport_ctrl_ip, &reg_data,
LPFC_SLIPORT_INIT_PORT);
writel(reg_data.word0, phba->sli4_hba.u.if_type2.
CTRLregaddr);
/*
* Poll the Port Status Register and wait for RDY for
* up to 10 seconds. If the port doesn't respond, treat
* it as an error. If the port responds with RN, start
* the loop again.
*/
for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
reg_data.word0 =
readl(phba->sli4_hba.u.if_type2.
STATUSregaddr);
if (bf_get(lpfc_sliport_status_rdy, &reg_data))
break;
if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
reset_again++;
break;
}
msleep(10);
}
/*
* If the port responds to the init request with
* reset needed, delay for a bit and restart the loop.
*/
if (reset_again) {
msleep(10);
reset_again = 0;
continue;
}
/* Detect any port errors. */
reg_data.word0 = readl(phba->sli4_hba.u.if_type2.
STATUSregaddr);
if ((bf_get(lpfc_sliport_status_err, &reg_data)) ||
(rdy_chk >= 1000)) {
phba->work_status[0] = readl(
phba->sli4_hba.u.if_type2.ERR1regaddr);
phba->work_status[1] = readl(
phba->sli4_hba.u.if_type2.ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2890 Port Error Detected "
"during Port Reset: "
"port status reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
reg_data.word0,
phba->work_status[0],
phba->work_status[1]);
rc = -ENODEV;
}
/*
* Terminate the outer loop provided the Port indicated
* ready within 10 seconds.
*/
if (rdy_chk < 1000)
break;
}
break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
break;
}
/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
LPFC_SLI4_MBX_EMBED);
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
shdr = (union lpfc_sli4_cfg_shdr *)
&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
if (rc != MBX_TIMEOUT)
mempool_free(mboxq, phba->mbox_mem_pool);
if (shdr_status || shdr_add_status || rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0495 SLI_FUNCTION_RESET mailbox failed with "
"status x%x add_status x%x, mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
}
/* Catch the not-ready port failure after a port reset. */
if (num_resets >= MAX_IF_TYPE_2_RESETS)
rc = -ENODEV;
return rc;
}
@ -6740,6 +6901,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
struct pci_dev *pdev;
unsigned long bar0map_len, bar1map_len, bar2map_len;
int error = -ENODEV;
uint32_t if_type;
/* Obtain PCI device reference */
if (!phba->pcidev)
@ -6756,61 +6918,105 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
}
}
/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
* number of bytes required by each mapping. They are actually
* mapping to the PCI BAR regions 0 or 1, 2, and 4 by the SLI4 device.
/*
* The BARs and register set definitions and offset locations are
* dependent on the if_type.
*/
if (pci_read_config_dword(pdev, LPFC_SLI_INTF,
&phba->sli4_hba.sli_intf.word0)) {
return error;
}
/* There is no SLI3 failback for SLI4 devices. */
if (bf_get(lpfc_sli_intf_valid, &phba->sli4_hba.sli_intf) !=
LPFC_SLI_INTF_VALID) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2894 SLI_INTF reg contents invalid "
"sli_intf reg 0x%x\n",
phba->sli4_hba.sli_intf.word0);
return error;
}
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
/*
* Get the bus address of SLI4 device Bar regions and the
* number of bytes required by each mapping. The mapping of the
* particular PCI BARs regions is dependent on the type of
* SLI4 device.
*/
if (pci_resource_start(pdev, 0)) {
phba->pci_bar0_map = pci_resource_start(pdev, 0);
bar0map_len = pci_resource_len(pdev, 0);
/*
* Map SLI4 PCI Config Space Register base to a kernel virtual
* addr
*/
phba->sli4_hba.conf_regs_memmap_p =
ioremap(phba->pci_bar0_map, bar0map_len);
if (!phba->sli4_hba.conf_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config "
"registers.\n");
goto out;
}
/* Set up BAR0 PCI config space register memory map */
lpfc_sli4_bar0_register_memmap(phba, if_type);
} else {
phba->pci_bar0_map = pci_resource_start(pdev, 1);
bar0map_len = pci_resource_len(pdev, 1);
}
phba->pci_bar1_map = pci_resource_start(pdev, 2);
bar1map_len = pci_resource_len(pdev, 2);
phba->pci_bar2_map = pci_resource_start(pdev, 4);
bar2map_len = pci_resource_len(pdev, 4);
/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
phba->sli4_hba.conf_regs_memmap_p =
if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
dev_printk(KERN_ERR, &pdev->dev,
"FATAL - No BAR0 mapping for SLI4, if_type 2\n");
goto out;
}
phba->sli4_hba.conf_regs_memmap_p =
ioremap(phba->pci_bar0_map, bar0map_len);
if (!phba->sli4_hba.conf_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config registers.\n");
goto out;
if (!phba->sli4_hba.conf_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 PCI config "
"registers.\n");
goto out;
}
lpfc_sli4_bar0_register_memmap(phba, if_type);
}
/* Map SLI4 HBA Control Register base to a kernel virtual address. */
phba->sli4_hba.ctrl_regs_memmap_p =
if (pci_resource_start(pdev, 2)) {
/*
* Map SLI4 if type 0 HBA Control Register base to a kernel
* virtual address and setup the registers.
*/
phba->pci_bar1_map = pci_resource_start(pdev, 2);
bar1map_len = pci_resource_len(pdev, 2);
phba->sli4_hba.ctrl_regs_memmap_p =
ioremap(phba->pci_bar1_map, bar1map_len);
if (!phba->sli4_hba.ctrl_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
if (!phba->sli4_hba.ctrl_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 HBA control registers.\n");
goto out_iounmap_conf;
goto out_iounmap_conf;
}
lpfc_sli4_bar1_register_memmap(phba);
}
/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
phba->sli4_hba.drbl_regs_memmap_p =
if (pci_resource_start(pdev, 4)) {
/*
* Map SLI4 if type 0 HBA Doorbell Register base to a kernel
* virtual address and setup the registers.
*/
phba->pci_bar2_map = pci_resource_start(pdev, 4);
bar2map_len = pci_resource_len(pdev, 4);
phba->sli4_hba.drbl_regs_memmap_p =
ioremap(phba->pci_bar2_map, bar2map_len);
if (!phba->sli4_hba.drbl_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
if (!phba->sli4_hba.drbl_regs_memmap_p) {
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLI4 HBA doorbell registers.\n");
goto out_iounmap_ctrl;
goto out_iounmap_ctrl;
}
error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
if (error)
goto out_iounmap_all;
}
/* Set up BAR0 PCI config space register memory map */
lpfc_sli4_bar0_register_memmap(phba);
/* Set up BAR1 register memory map */
lpfc_sli4_bar1_register_memmap(phba);
/* Set up BAR2 register memory map */
error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
if (error)
goto out_iounmap_all;
return 0;
out_iounmap_all:
@ -8424,7 +8630,11 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
"0451 Configure interrupt mode (%d) "
"failed active interrupt test.\n",
intr_mode);
/* Unset the preivous SLI-4 HBA setup */
/* Unset the previous SLI-4 HBA setup. */
/*
* TODO: Is this operation compatible with IF TYPE 2
* devices? All port state is deleted and cleared.
*/
lpfc_sli4_unset_hba(phba);
/* Try next level of interrupt mode */
cfg_mode = --intr_mode;

View File

@ -4690,6 +4690,10 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
struct lpfc_vport *vport = phba->pport;
struct lpfc_dmabuf *mp;
/*
* TODO: Why does this routine execute these task in a different
* order from probe?
*/
/* Perform a PCI function reset to start from clean */
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc))
@ -8439,29 +8443,66 @@ static int
lpfc_sli4_eratt_read(struct lpfc_hba *phba)
{
uint32_t uerr_sta_hi, uerr_sta_lo;
uint32_t if_type, portsmphr;
struct lpfc_register portstat_reg;
/* For now, use the SLI4 device internal unrecoverable error
/*
* For now, use the SLI4 device internal unrecoverable error
* registers for error attention. This can be changed later.
*/
uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
(~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
case LPFC_SLI_INTF_IF_TYPE_0:
uerr_sta_lo = readl(phba->sli4_hba.u.if_type0.UERRLOregaddr);
uerr_sta_hi = readl(phba->sli4_hba.u.if_type0.UERRHIregaddr);
if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
(~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1423 HBA Unrecoverable error: "
"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
"ue_mask_lo_reg=0x%x, "
"ue_mask_hi_reg=0x%x\n",
uerr_sta_lo, uerr_sta_hi,
phba->sli4_hba.ue_mask_lo,
phba->sli4_hba.ue_mask_hi);
phba->work_status[0] = uerr_sta_lo;
phba->work_status[1] = uerr_sta_hi;
phba->work_ha |= HA_ERATT;
phba->hba_flag |= HBA_ERATT_HANDLED;
return 1;
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
portstat_reg.word0 =
readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
portsmphr = readl(phba->sli4_hba.PSMPHRregaddr);
if (bf_get(lpfc_sliport_status_err, &portstat_reg)) {
phba->work_status[0] =
readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
phba->work_status[1] =
readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2885 Port Error Detected: "
"port status reg 0x%x, "
"port smphr reg 0x%x, "
"error 1=0x%x, error 2=0x%x\n",
portstat_reg.word0,
portsmphr,
phba->work_status[0],
phba->work_status[1]);
phba->work_ha |= HA_ERATT;
phba->hba_flag |= HBA_ERATT_HANDLED;
return 1;
}
break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1423 HBA Unrecoverable error: "
"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
"ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
uerr_sta_lo, uerr_sta_hi,
phba->sli4_hba.ue_mask_lo,
phba->sli4_hba.ue_mask_hi);
phba->work_status[0] = uerr_sta_lo;
phba->work_status[1] = uerr_sta_hi;
/* Set the driver HA work bitmap */
phba->work_ha |= HA_ERATT;
/* Indicate polling handles this ERATT */
phba->hba_flag |= HBA_ERATT_HANDLED;
"2886 HBA Error Attention on unsupported "
"if type %d.", if_type);
return 1;
}
return 0;
}
@ -8516,7 +8557,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
ha_copy = lpfc_sli_eratt_read(phba);
break;
case LPFC_SLI_REV4:
/* Read devcie Uncoverable Error (UERR) registers */
/* Read device Uncoverable Error (UERR) registers */
ha_copy = lpfc_sli4_eratt_read(phba);
break;
default:

View File

@ -369,23 +369,39 @@ struct lpfc_sli4_hba {
PCI BAR1, control registers */
void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
PCI BAR2, doorbell registers */
/* BAR0 PCI config space register memory map */
void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
void __iomem *UEMASKLOregaddr; /* Address to UE_MASK_LO register */
void __iomem *UEMASKHIregaddr; /* Address to UE_MASK_HI register */
void __iomem *SLIINTFregaddr; /* Address to SLI_INTF register */
/* BAR1 FCoE function CSR register memory map */
void __iomem *STAregaddr; /* Address to HST_STATE register */
void __iomem *ISRregaddr; /* Address to HST_ISR register */
void __iomem *IMRregaddr; /* Address to HST_IMR register */
void __iomem *ISCRregaddr; /* Address to HST_ISCR register */
/* BAR2 VF-0 doorbell register memory map */
void __iomem *RQDBregaddr; /* Address to RQ_DOORBELL register */
void __iomem *WQDBregaddr; /* Address to WQ_DOORBELL register */
void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
void __iomem *MQDBregaddr; /* Address to MQ_DOORBELL register */
void __iomem *BMBXregaddr; /* Address to BootStrap MBX register */
union {
struct {
/* IF Type 0, BAR 0 PCI cfg space reg mem map */
void __iomem *UERRLOregaddr;
void __iomem *UERRHIregaddr;
void __iomem *UEMASKLOregaddr;
void __iomem *UEMASKHIregaddr;
} if_type0;
struct {
/* IF Type 2, BAR 0 PCI cfg space reg mem map. */
void __iomem *STATUSregaddr;
void __iomem *CTRLregaddr;
void __iomem *ERR1regaddr;
void __iomem *ERR2regaddr;
} if_type2;
} u;
/* IF type 0, BAR1 and if type 2, Bar 0 CSR register memory map */
void __iomem *PSMPHRregaddr;
/* Well-known SLI INTF register memory map. */
void __iomem *SLIINTFregaddr;
/* IF type 0, BAR 1 function CSR register memory map */
void __iomem *ISRregaddr; /* HST_ISR register */
void __iomem *IMRregaddr; /* HST_IMR register */
void __iomem *ISCRregaddr; /* HST_ISCR register */
/* IF type 0, BAR 0 and if type 2, BAR 0 doorbell register memory map */
void __iomem *RQDBregaddr; /* RQ_DOORBELL register */
void __iomem *WQDBregaddr; /* WQ_DOORBELL register */
void __iomem *EQCQDBregaddr; /* EQCQ_DOORBELL register */
void __iomem *MQDBregaddr; /* MQ_DOORBELL register */
void __iomem *BMBXregaddr; /* BootStrap MBX register */
uint32_t ue_mask_lo;
uint32_t ue_mask_hi;