diff --git a/Documentation/devicetree/bindings/mfd/bcm590xx.txt b/Documentation/devicetree/bindings/mfd/bcm590xx.txt index 1fe30e2b10da..be51a15e05f9 100644 --- a/Documentation/devicetree/bindings/mfd/bcm590xx.txt +++ b/Documentation/devicetree/bindings/mfd/bcm590xx.txt @@ -19,7 +19,9 @@ Optional child nodes: The valid regulator node names for BCM59056 are: rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo, mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo, - csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr + csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr, + gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6, + vbus Example: pmu: bcm59056@8 { diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 802e839b0829..d81ba30c0d8b 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -56,6 +56,20 @@ for a particular group of BUCKs. So provide same regulator-ramp-delay. Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6], BUCK[3, 4], and BUCK[7, 8, 10] +On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control +over GPIO. To turn this feature on this property must be added to the regulator +sub-node: + - samsung,ext-control-gpios: GPIO specifier for one GPIO + controlling this regulator (enable/disable); +Example: + LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + The regulator constraints inside the regulator nodes use the standard regulator bindings which are documented elsewhere. diff --git a/Documentation/devicetree/bindings/regulator/ltc3589.txt b/Documentation/devicetree/bindings/regulator/ltc3589.txt new file mode 100644 index 000000000000..801053036146 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ltc3589.txt @@ -0,0 +1,99 @@ +Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators + +Required properties: +- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2" +- reg: I2C slave address + +Required child node: +- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out, + ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as + documented in Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. The +nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify +the resistor values of their external feedback voltage dividers: + +Required properties (not on ldo3, ldo4): +- lltc,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in ohms. + +Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from +0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between +0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1 +have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3 +regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4 +regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V +and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not +be disabled and thus should have the regulator-always-on property set. + +Example: + + ltc3589: pmic@34 { + compatible = "lltc,ltc3589-1"; + reg = <0x34>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <591930>; + regulator-max-microvolt = <1224671>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456803>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1341250>; + regulator-max-microvolt = <2775000>; + lltc,fb-voltage-divider = <270000 100000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + bb_out_reg: bb-out { + regulator-min-microvolt = <3387341>; + regulator-max-microvolt = <3387341>; + lltc,fb-voltage-divider = <511000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <1306329>; + regulator-max-microvolt = <1306329>; + lltc,fb-voltage-divider = <100000 158000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <704123>; + regulator-max-microvolt = <1456806>; + lltc,fb-voltage-divider = <180000 191000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3200000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt index 313a60ba61d8..340980239ea9 100644 --- a/Documentation/devicetree/bindings/regulator/tps65090.txt +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -21,6 +21,10 @@ Optional properties: number should be provided. If it is externally controlled and no GPIO entry then driver will just configure this rails as external control and will not provide any enable/disable APIs. +- ti,overcurrent-wait: This is applicable to FET registers, which have a + poorly defined "overcurrent wait" field. If this property is present it + should be between 0 - 3. If this property isn't present we won't touch the + "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with. Each regulator is defined using the standard binding for regulators. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 2ee6ead72434..941980474e14 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -74,6 +74,7 @@ lantiq Lantiq Semiconductor lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) +lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products microchip Microchip Technology Inc. diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 1c3ae57082ed..07e6e27be23c 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -508,19 +508,31 @@ int arizona_of_get_type(struct device *dev) } EXPORT_SYMBOL_GPL(arizona_of_get_type); +int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop, + bool mandatory) +{ + int gpio; + + gpio = of_get_named_gpio(arizona->dev->of_node, prop, 0); + if (gpio < 0) { + if (mandatory) + dev_err(arizona->dev, + "Mandatory DT gpio %s missing/malformed: %d\n", + prop, gpio); + + gpio = 0; + } + + return gpio; +} +EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio); + static int arizona_of_get_core_pdata(struct arizona *arizona) { + struct arizona_pdata *pdata = &arizona->pdata; int ret, i; - arizona->pdata.reset = of_get_named_gpio(arizona->dev->of_node, - "wlf,reset", 0); - if (arizona->pdata.reset < 0) - arizona->pdata.reset = 0; - - arizona->pdata.ldoena = of_get_named_gpio(arizona->dev->of_node, - "wlf,ldoena", 0); - if (arizona->pdata.ldoena < 0) - arizona->pdata.ldoena = 0; + pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true); ret = of_property_read_u32_array(arizona->dev->of_node, "wlf,gpio-defaults", @@ -652,6 +664,9 @@ int arizona_dev_init(struct arizona *arizona) return -EINVAL; } + /* Mark DCVDD as external, LDO1 driver will clear if internal */ + arizona->external_dcvdd = true; + ret = mfd_add_devices(arizona->dev, -1, early_devs, ARRAY_SIZE(early_devs), NULL, 0, NULL); if (ret != 0) { @@ -851,14 +866,6 @@ int arizona_dev_init(struct arizona *arizona) arizona->pdata.gpio_defaults[i]); } - /* - * LDO1 can only be used to supply DCVDD so if it has no - * consumers then DCVDD is supplied externally. - */ - if (arizona->pdata.ldo1 && - arizona->pdata.ldo1->num_consumer_supplies == 0) - arizona->external_dcvdd = true; - pm_runtime_set_autosuspend_delay(arizona->dev, 100); pm_runtime_use_autosuspend(arizona->dev); pm_runtime_enable(arizona->dev); diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c index e9a33c79431b..43cba1a1973c 100644 --- a/drivers/mfd/bcm590xx.c +++ b/drivers/mfd/bcm590xx.c @@ -28,39 +28,71 @@ static const struct mfd_cell bcm590xx_devs[] = { }, }; -static const struct regmap_config bcm590xx_regmap_config = { +static const struct regmap_config bcm590xx_regmap_config_pri = { .reg_bits = 8, .val_bits = 8, - .max_register = BCM590XX_MAX_REGISTER, + .max_register = BCM590XX_MAX_REGISTER_PRI, .cache_type = REGCACHE_RBTREE, }; -static int bcm590xx_i2c_probe(struct i2c_client *i2c, +static const struct regmap_config bcm590xx_regmap_config_sec = { + .reg_bits = 8, + .val_bits = 8, + .max_register = BCM590XX_MAX_REGISTER_SEC, + .cache_type = REGCACHE_RBTREE, +}; + +static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri, const struct i2c_device_id *id) { struct bcm590xx *bcm590xx; int ret; - bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL); + bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL); if (!bcm590xx) return -ENOMEM; - i2c_set_clientdata(i2c, bcm590xx); - bcm590xx->dev = &i2c->dev; - bcm590xx->i2c_client = i2c; + i2c_set_clientdata(i2c_pri, bcm590xx); + bcm590xx->dev = &i2c_pri->dev; + bcm590xx->i2c_pri = i2c_pri; - bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config); - if (IS_ERR(bcm590xx->regmap)) { - ret = PTR_ERR(bcm590xx->regmap); - dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri, + &bcm590xx_regmap_config_pri); + if (IS_ERR(bcm590xx->regmap_pri)) { + ret = PTR_ERR(bcm590xx->regmap_pri); + dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret); return ret; } - ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs, - ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL); - if (ret < 0) - dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret); + /* Secondary I2C slave address is the base address with A(2) asserted */ + bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter, + i2c_pri->addr | BIT(2)); + if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) { + dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n"); + return -ENODEV; + } + i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx); + bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec, + &bcm590xx_regmap_config_sec); + if (IS_ERR(bcm590xx->regmap_sec)) { + ret = PTR_ERR(bcm590xx->regmap_sec); + dev_err(&bcm590xx->i2c_sec->dev, + "secondary regmap init failed: %d\n", ret); + goto err; + } + + ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs, + ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL); + if (ret < 0) { + dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret); + goto err; + } + + return 0; + +err: + i2c_unregister_device(bcm590xx->i2c_sec); return ret; } diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index ba1a25d758c1..1c3e6e2efe41 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -32,14 +32,6 @@ #define NUM_INT_REG 2 #define TOTAL_NUM_REG 0x18 -/* interrupt status registers */ -#define TPS65090_INT_STS 0x0 -#define TPS65090_INT_STS2 0x1 - -/* interrupt mask registers */ -#define TPS65090_INT_MSK 0x2 -#define TPS65090_INT_MSK2 0x3 - #define TPS65090_INT1_MASK_VAC_STATUS_CHANGE 1 #define TPS65090_INT1_MASK_VSYS_STATUS_CHANGE 2 #define TPS65090_INT1_MASK_BAT_STATUS_CHANGE 3 @@ -64,11 +56,16 @@ static struct resource charger_resources[] = { } }; -static const struct mfd_cell tps65090s[] = { - { +enum tps65090_cells { + PMIC = 0, + CHARGER = 1, +}; + +static struct mfd_cell tps65090s[] = { + [PMIC] = { .name = "tps65090-pmic", }, - { + [CHARGER] = { .name = "tps65090-charger", .num_resources = ARRAY_SIZE(charger_resources), .resources = &charger_resources[0], @@ -139,17 +136,26 @@ static struct regmap_irq_chip tps65090_irq_chip = { .irqs = tps65090_irqs, .num_irqs = ARRAY_SIZE(tps65090_irqs), .num_regs = NUM_INT_REG, - .status_base = TPS65090_INT_STS, - .mask_base = TPS65090_INT_MSK, + .status_base = TPS65090_REG_INTR_STS, + .mask_base = TPS65090_REG_INTR_MASK, .mask_invert = true, }; static bool is_volatile_reg(struct device *dev, unsigned int reg) { - if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS2)) - return true; - else + /* Nearly all registers have status bits mixed in, except a few */ + switch (reg) { + case TPS65090_REG_INTR_MASK: + case TPS65090_REG_INTR_MASK2: + case TPS65090_REG_CG_CTRL0: + case TPS65090_REG_CG_CTRL1: + case TPS65090_REG_CG_CTRL2: + case TPS65090_REG_CG_CTRL3: + case TPS65090_REG_CG_CTRL4: + case TPS65090_REG_CG_CTRL5: return false; + } + return true; } static const struct regmap_config tps65090_regmap_config = { @@ -211,6 +217,9 @@ static int tps65090_i2c_probe(struct i2c_client *client, "IRQ init failed with err: %d\n", ret); return ret; } + } else { + /* Don't tell children they have an IRQ that'll never fire */ + tps65090s[CHARGER].num_resources = 0; } ret = mfd_add_devices(tps65090->dev, -1, tps65090s, diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index bbd54414a75d..835e5549ecdd 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -495,6 +495,10 @@ static void tps6586x_print_version(struct i2c_client *client, int version) case TPS658623: name = "TPS658623"; break; + case TPS658640: + case TPS658640v2: + name = "TPS658640"; + break; case TPS658643: name = "TPS658643"; break; diff --git a/drivers/power/tps65090-charger.c b/drivers/power/tps65090-charger.c index 8fc9d6df87f6..1685f63b9e5d 100644 --- a/drivers/power/tps65090-charger.c +++ b/drivers/power/tps65090-charger.c @@ -28,17 +28,6 @@ #include -#define TPS65090_REG_INTR_STS 0x00 -#define TPS65090_REG_INTR_MASK 0x02 -#define TPS65090_REG_CG_CTRL0 0x04 -#define TPS65090_REG_CG_CTRL1 0x05 -#define TPS65090_REG_CG_CTRL2 0x06 -#define TPS65090_REG_CG_CTRL3 0x07 -#define TPS65090_REG_CG_CTRL4 0x08 -#define TPS65090_REG_CG_CTRL5 0x09 -#define TPS65090_REG_CG_STATUS1 0x0a -#define TPS65090_REG_CG_STATUS2 0x0b - #define TPS65090_CHARGER_ENABLE BIT(0) #define TPS65090_VACG BIT(1) #define TPS65090_NOITERM BIT(5) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f0cc9e6dac3a..789eb46090e3 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -139,6 +139,13 @@ config REGULATOR_AS3722 AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_AXP20X + tristate "X-POWERS AXP20X PMIC Regulators" + depends on MFD_AXP20X + help + This driver provides support for the voltage regulators on the + AXP20X PMIC. + config REGULATOR_BCM590XX tristate "Broadcom BCM590xx PMU Regulators" depends on MFD_BCM590XX @@ -265,6 +272,14 @@ config REGULATOR_LP8788 help This driver supports LP8788 voltage regulator chip. +config REGULATOR_LTC3589 + tristate "LTC3589 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3589, LTC3589-1, and LTC3589-2 + 8-output regulators controlled via I2C. + config REGULATOR_MAX14577 tristate "Maxim 14577/77836 regulator" depends on MFD_MAX14577 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 12ef277a48b4..d461110f4463 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o +obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o @@ -37,6 +38,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o +obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 7c397bb81e01..4f730af70e7c 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -300,7 +300,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) return 0; } -static struct of_device_id of_anatop_regulator_match_tbl[] = { +static const struct of_device_id of_anatop_regulator_match_tbl[] = { { .compatible = "fsl,anatop-regulator", }, { /* end */ } }; diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index b1033d30b504..04f262a836b2 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -16,9 +16,11 @@ #include #include #include +#include #include #include #include +#include #include #include @@ -178,6 +180,42 @@ static const struct regulator_init_data arizona_ldo1_default = { .num_consumer_supplies = 1, }; +static int arizona_ldo1_of_get_pdata(struct arizona *arizona, + struct regulator_config *config) +{ + struct arizona_pdata *pdata = &arizona->pdata; + struct arizona_ldo1 *ldo1 = config->driver_data; + struct device_node *init_node, *dcvdd_node; + struct regulator_init_data *init_data; + + pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true); + + init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1"); + dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0); + + if (init_node) { + config->of_node = init_node; + + init_data = of_get_regulator_init_data(arizona->dev, init_node); + + if (init_data) { + init_data->consumer_supplies = &ldo1->supply; + init_data->num_consumer_supplies = 1; + + if (dcvdd_node && dcvdd_node != init_node) + arizona->external_dcvdd = true; + + pdata->ldo1 = init_data; + } + } else if (dcvdd_node) { + arizona->external_dcvdd = true; + } + + of_node_put(dcvdd_node); + + return 0; +} + static int arizona_ldo1_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); @@ -186,6 +224,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) struct arizona_ldo1 *ldo1; int ret; + arizona->external_dcvdd = false; + ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); if (!ldo1) return -ENOMEM; @@ -216,6 +256,15 @@ static int arizona_ldo1_probe(struct platform_device *pdev) config.dev = arizona->dev; config.driver_data = ldo1; config.regmap = arizona->regmap; + + if (IS_ENABLED(CONFIG_OF)) { + if (!dev_get_platdata(arizona->dev)) { + ret = arizona_ldo1_of_get_pdata(arizona, &config); + if (ret < 0) + return ret; + } + } + config.ena_gpio = arizona->pdata.ldoena; if (arizona->pdata.ldo1) @@ -223,6 +272,13 @@ static int arizona_ldo1_probe(struct platform_device *pdev) else config.init_data = &ldo1->init_data; + /* + * LDO1 can only be used to supply DCVDD so if it has no + * consumers then DCVDD is supplied externally. + */ + if (config.init_data->num_consumer_supplies == 0) + arizona->external_dcvdd = true; + ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config); if (IS_ERR(ldo1->regulator)) { ret = PTR_ERR(ldo1->regulator); @@ -231,6 +287,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) return ret; } + of_node_put(config.of_node); + platform_set_drvdata(pdev, ldo1); return 0; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 6fdd9bf6927f..ce9aca5f8ee7 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -16,9 +16,11 @@ #include #include #include +#include #include #include #include +#include #include #include #include @@ -195,6 +197,32 @@ static const struct regulator_init_data arizona_micsupp_ext_default = { .num_consumer_supplies = 1, }; +static int arizona_micsupp_of_get_pdata(struct arizona *arizona, + struct regulator_config *config) +{ + struct arizona_pdata *pdata = &arizona->pdata; + struct arizona_micsupp *micsupp = config->driver_data; + struct device_node *np; + struct regulator_init_data *init_data; + + np = of_get_child_by_name(arizona->dev->of_node, "micvdd"); + + if (np) { + config->of_node = np; + + init_data = of_get_regulator_init_data(arizona->dev, np); + + if (init_data) { + init_data->consumer_supplies = &micsupp->supply; + init_data->num_consumer_supplies = 1; + + pdata->micvdd = init_data; + } + } + + return 0; +} + static int arizona_micsupp_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); @@ -234,6 +262,14 @@ static int arizona_micsupp_probe(struct platform_device *pdev) config.driver_data = micsupp; config.regmap = arizona->regmap; + if (IS_ENABLED(CONFIG_OF)) { + if (!dev_get_platdata(arizona->dev)) { + ret = arizona_micsupp_of_get_pdata(arizona, &config); + if (ret < 0) + return ret; + } + } + if (arizona->pdata.micvdd) config.init_data = arizona->pdata.micvdd; else @@ -253,6 +289,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev) return ret; } + of_node_put(config.of_node); + platform_set_drvdata(pdev, micsupp); return 0; diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c new file mode 100644 index 000000000000..004aadb7bcc1 --- /dev/null +++ b/drivers/regulator/axp20x-regulator.c @@ -0,0 +1,286 @@ +/* + * AXP20x regulators driver. + * + * Copyright (C) 2013 Carlo Caione + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AXP20X_IO_ENABLED 0x03 +#define AXP20X_IO_DISABLED 0x07 + +#define AXP20X_WORKMODE_DCDC2_MASK BIT(2) +#define AXP20X_WORKMODE_DCDC3_MASK BIT(1) + +#define AXP20X_FREQ_DCDC_MASK 0x0f + +#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ + _emask, _enable_val, _disable_val) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = (((_max) - (_min)) / (_step) + 1), \ + .owner = THIS_MODULE, \ + .min_uV = (_min) * 1000, \ + .uV_step = (_step) * 1000, \ + .vsel_reg = (_vreg), \ + .vsel_mask = (_vmask), \ + .enable_reg = (_ereg), \ + .enable_mask = (_emask), \ + .enable_val = (_enable_val), \ + .disable_val = (_disable_val), \ + .ops = &axp20x_ops, \ + } + +#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \ + _emask) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = (((_max) - (_min)) / (_step) + 1), \ + .owner = THIS_MODULE, \ + .min_uV = (_min) * 1000, \ + .uV_step = (_step) * 1000, \ + .vsel_reg = (_vreg), \ + .vsel_mask = (_vmask), \ + .enable_reg = (_ereg), \ + .enable_mask = (_emask), \ + .ops = &axp20x_ops, \ + } + +#define AXP20X_DESC_FIXED(_id, _supply, _volt) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = 1, \ + .owner = THIS_MODULE, \ + .min_uV = (_volt) * 1000, \ + .ops = &axp20x_ops_fixed \ + } + +#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \ + [AXP20X_##_id] = { \ + .name = #_id, \ + .supply_name = (_supply), \ + .type = REGULATOR_VOLTAGE, \ + .id = AXP20X_##_id, \ + .n_voltages = ARRAY_SIZE(_table), \ + .owner = THIS_MODULE, \ + .vsel_reg = (_vreg), \ + .vsel_mask = (_vmask), \ + .enable_reg = (_ereg), \ + .enable_mask = (_emask), \ + .volt_table = (_table), \ + .ops = &axp20x_ops_table, \ + } + +static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, + 1700000, 1800000, 1900000, 2000000, 2500000, + 2700000, 2800000, 3000000, 3100000, 3200000, + 3300000 }; + +static struct regulator_ops axp20x_ops_fixed = { + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops axp20x_ops_table = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops axp20x_ops = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc axp20x_regulators[] = { + AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, + AXP20X_PWR_OUT_CTRL, 0x10), + AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f, + AXP20X_PWR_OUT_CTRL, 0x02), + AXP20X_DESC_FIXED(LDO1, "acin", 1300), + AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0, + AXP20X_PWR_OUT_CTRL, 0x04), + AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, + AXP20X_PWR_OUT_CTRL, 0x40), + AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f, + AXP20X_PWR_OUT_CTRL, 0x08), + AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, + AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, + AXP20X_IO_DISABLED), +}; + +#define AXP_MATCH(_name, _id) \ + [AXP20X_##_id] = { \ + .name = #_name, \ + .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \ + } + +static struct of_regulator_match axp20x_matches[] = { + AXP_MATCH(dcdc2, DCDC2), + AXP_MATCH(dcdc3, DCDC3), + AXP_MATCH(ldo1, LDO1), + AXP_MATCH(ldo2, LDO2), + AXP_MATCH(ldo3, LDO3), + AXP_MATCH(ldo4, LDO4), + AXP_MATCH(ldo5, LDO5), +}; + +static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) +{ + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + + if (dcdcfreq < 750) { + dcdcfreq = 750; + dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); + } + + if (dcdcfreq > 1875) { + dcdcfreq = 1875; + dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); + } + + dcdcfreq = (dcdcfreq - 750) / 75; + + return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, + AXP20X_FREQ_DCDC_MASK, dcdcfreq); +} + +static int axp20x_regulator_parse_dt(struct platform_device *pdev) +{ + struct device_node *np, *regulators; + int ret; + u32 dcdcfreq; + + np = of_node_get(pdev->dev.parent->of_node); + if (!np) + return 0; + + regulators = of_get_child_by_name(np, "regulators"); + if (!regulators) { + dev_warn(&pdev->dev, "regulators node not found\n"); + } else { + ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches, + ARRAY_SIZE(axp20x_matches)); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); + return ret; + } + + dcdcfreq = 1500; + of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); + ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); + if (ret < 0) { + dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret); + return ret; + } + + of_node_put(regulators); + } + + return 0; +} + +static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) +{ + unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; + + if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) + return -EINVAL; + + if (id == AXP20X_DCDC3) + mask = AXP20X_WORKMODE_DCDC3_MASK; + + workmode <<= ffs(mask) - 1; + + return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); +} + +static int axp20x_regulator_probe(struct platform_device *pdev) +{ + struct regulator_dev *rdev; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = { }; + struct regulator_init_data *init_data; + int ret, i; + u32 workmode; + + ret = axp20x_regulator_parse_dt(pdev); + if (ret) + return ret; + + for (i = 0; i < AXP20X_REG_ID_MAX; i++) { + init_data = axp20x_matches[i].init_data; + + config.dev = &pdev->dev; + config.init_data = init_data; + config.regmap = axp20x->regmap; + config.of_node = axp20x_matches[i].of_node; + + rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register %s\n", + axp20x_regulators[i].name); + + return PTR_ERR(rdev); + } + + ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode", + &workmode); + if (!ret) { + if (axp20x_set_dcdc_workmode(rdev, i, workmode)) + dev_err(&pdev->dev, "Failed to set workmode on %s\n", + axp20x_regulators[i].name); + } + } + + return 0; +} + +static struct platform_driver axp20x_regulator_driver = { + .probe = axp20x_regulator_probe, + .driver = { + .name = "axp20x-regulator", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(axp20x_regulator_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Carlo Caione "); +MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC"); diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c index c3750c5b382b..57544e254a78 100644 --- a/drivers/regulator/bcm590xx-regulator.c +++ b/drivers/regulator/bcm590xx-regulator.c @@ -22,7 +22,7 @@ #include #include -/* Register defs */ +/* I2C slave 0 registers */ #define BCM590XX_RFLDOPMCTRL1 0x60 #define BCM590XX_IOSR1PMCTRL1 0x7a #define BCM590XX_IOSR2PMCTRL1 0x7c @@ -31,13 +31,34 @@ #define BCM590XX_SDSR2PMCTRL1 0x86 #define BCM590XX_MSRPMCTRL1 0x8a #define BCM590XX_VSRPMCTRL1 0x8e -#define BCM590XX_REG_ENABLE BIT(7) - #define BCM590XX_RFLDOCTRL 0x96 #define BCM590XX_CSRVOUT1 0xc0 + +/* I2C slave 1 registers */ +#define BCM590XX_GPLDO5PMCTRL1 0x16 +#define BCM590XX_GPLDO6PMCTRL1 0x18 +#define BCM590XX_GPLDO1CTRL 0x1a +#define BCM590XX_GPLDO2CTRL 0x1b +#define BCM590XX_GPLDO3CTRL 0x1c +#define BCM590XX_GPLDO4CTRL 0x1d +#define BCM590XX_GPLDO5CTRL 0x1e +#define BCM590XX_GPLDO6CTRL 0x1f +#define BCM590XX_OTG_CTRL 0x40 +#define BCM590XX_GPLDO1PMCTRL1 0x57 +#define BCM590XX_GPLDO2PMCTRL1 0x59 +#define BCM590XX_GPLDO3PMCTRL1 0x5b +#define BCM590XX_GPLDO4PMCTRL1 0x5d + +#define BCM590XX_REG_ENABLE BIT(7) +#define BCM590XX_VBUS_ENABLE BIT(2) #define BCM590XX_LDO_VSEL_MASK GENMASK(5, 3) #define BCM590XX_SR_VSEL_MASK GENMASK(5, 0) +/* + * RFLDO to VSR regulators are + * accessed via I2C slave 0 + */ + /* LDO regulator IDs */ #define BCM590XX_REG_RFLDO 0 #define BCM590XX_REG_CAMLDO1 1 @@ -62,9 +83,25 @@ #define BCM590XX_REG_SDSR2 18 #define BCM590XX_REG_VSR 19 -#define BCM590XX_NUM_REGS 20 +/* + * GPLDO1 to VBUS regulators are + * accessed via I2C slave 1 + */ + +#define BCM590XX_REG_GPLDO1 20 +#define BCM590XX_REG_GPLDO2 21 +#define BCM590XX_REG_GPLDO3 22 +#define BCM590XX_REG_GPLDO4 23 +#define BCM590XX_REG_GPLDO5 24 +#define BCM590XX_REG_GPLDO6 25 +#define BCM590XX_REG_VBUS 26 + +#define BCM590XX_NUM_REGS 27 #define BCM590XX_REG_IS_LDO(n) (n < BCM590XX_REG_CSR) +#define BCM590XX_REG_IS_GPLDO(n) \ + ((n > BCM590XX_REG_VSR) && (n < BCM590XX_REG_VBUS)) +#define BCM590XX_REG_IS_VBUS(n) (n == BCM590XX_REG_VBUS) struct bcm590xx_board { struct regulator_init_data *bcm590xx_pmu_init_data[BCM590XX_NUM_REGS]; @@ -149,6 +186,12 @@ static struct bcm590xx_info bcm590xx_regs[] = { BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges), BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges), BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges), + BCM590XX_REG_TABLE(gpldo1, ldo_a_table), + BCM590XX_REG_TABLE(gpldo2, ldo_a_table), + BCM590XX_REG_TABLE(gpldo3, ldo_a_table), + BCM590XX_REG_TABLE(gpldo4, ldo_a_table), + BCM590XX_REG_TABLE(gpldo5, ldo_a_table), + BCM590XX_REG_TABLE(gpldo6, ldo_a_table), }; struct bcm590xx_reg { @@ -161,6 +204,8 @@ static int bcm590xx_get_vsel_register(int id) { if (BCM590XX_REG_IS_LDO(id)) return BCM590XX_RFLDOCTRL + id; + else if (BCM590XX_REG_IS_GPLDO(id)) + return BCM590XX_GPLDO1CTRL + id; else return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3; } @@ -171,6 +216,8 @@ static int bcm590xx_get_enable_register(int id) if (BCM590XX_REG_IS_LDO(id)) reg = BCM590XX_RFLDOPMCTRL1 + id * 2; + else if (BCM590XX_REG_IS_GPLDO(id)) + reg = BCM590XX_GPLDO1PMCTRL1 + id * 2; else switch (id) { case BCM590XX_REG_CSR: @@ -191,8 +238,11 @@ static int bcm590xx_get_enable_register(int id) case BCM590XX_REG_SDSR2: reg = BCM590XX_SDSR2PMCTRL1; break; + case BCM590XX_REG_VBUS: + reg = BCM590XX_OTG_CTRL; }; + return reg; } @@ -216,6 +266,12 @@ static struct regulator_ops bcm590xx_ops_dcdc = { .map_voltage = regulator_map_voltage_linear_range, }; +static struct regulator_ops bcm590xx_ops_vbus = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, +}; + #define BCM590XX_MATCH(_name, _id) \ { \ .name = #_name, \ @@ -243,6 +299,13 @@ static struct of_regulator_match bcm590xx_matches[] = { BCM590XX_MATCH(sdsr1, SDSR1), BCM590XX_MATCH(sdsr2, SDSR2), BCM590XX_MATCH(vsr, VSR), + BCM590XX_MATCH(gpldo1, GPLDO1), + BCM590XX_MATCH(gpldo2, GPLDO2), + BCM590XX_MATCH(gpldo3, GPLDO3), + BCM590XX_MATCH(gpldo4, GPLDO4), + BCM590XX_MATCH(gpldo5, GPLDO5), + BCM590XX_MATCH(gpldo6, GPLDO6), + BCM590XX_MATCH(vbus, VBUS), }; static struct bcm590xx_board *bcm590xx_parse_dt_reg_data( @@ -353,17 +416,23 @@ static int bcm590xx_probe(struct platform_device *pdev) pmu->desc[i].linear_ranges = info->linear_ranges; pmu->desc[i].n_linear_ranges = info->n_linear_ranges; - if (BCM590XX_REG_IS_LDO(i)) { + if ((BCM590XX_REG_IS_LDO(i)) || (BCM590XX_REG_IS_GPLDO(i))) { pmu->desc[i].ops = &bcm590xx_ops_ldo; pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK; - } else { + } else if (BCM590XX_REG_IS_VBUS(i)) + pmu->desc[i].ops = &bcm590xx_ops_vbus; + else { pmu->desc[i].ops = &bcm590xx_ops_dcdc; pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK; } - pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i); - pmu->desc[i].enable_is_inverted = true; - pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE; + if (BCM590XX_REG_IS_VBUS(i)) + pmu->desc[i].enable_mask = BCM590XX_VBUS_ENABLE; + else { + pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i); + pmu->desc[i].enable_is_inverted = true; + pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE; + } pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i); pmu->desc[i].type = REGULATOR_VOLTAGE; pmu->desc[i].owner = THIS_MODULE; @@ -371,7 +440,10 @@ static int bcm590xx_probe(struct platform_device *pdev) config.dev = bcm590xx->dev; config.init_data = reg_data; config.driver_data = pmu; - config.regmap = bcm590xx->regmap; + if (BCM590XX_REG_IS_GPLDO(i) || BCM590XX_REG_IS_VBUS(i)) + config.regmap = bcm590xx->regmap_sec; + else + config.regmap = bcm590xx->regmap_pri; if (bcm590xx_reg_matches) config.of_node = bcm590xx_reg_matches[i].of_node; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9a09f3cdbabb..4c1f999041dd 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -844,13 +844,22 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, /* do we need to apply the constraint voltage */ if (rdev->constraints->apply_uV && rdev->constraints->min_uV == rdev->constraints->max_uV) { - ret = _regulator_do_set_voltage(rdev, - rdev->constraints->min_uV, - rdev->constraints->max_uV); - if (ret < 0) { - rdev_err(rdev, "failed to apply %duV constraint\n", - rdev->constraints->min_uV); - return ret; + int current_uV = _regulator_get_voltage(rdev); + if (current_uV < 0) { + rdev_err(rdev, "failed to get the current voltage\n"); + return current_uV; + } + if (current_uV < rdev->constraints->min_uV || + current_uV > rdev->constraints->max_uV) { + ret = _regulator_do_set_voltage( + rdev, rdev->constraints->min_uV, + rdev->constraints->max_uV); + if (ret < 0) { + rdev_err(rdev, + "failed to apply %duV constraint\n", + rdev->constraints->min_uV); + return ret; + } } } @@ -1430,9 +1439,9 @@ EXPORT_SYMBOL_GPL(regulator_get); * * Returns a struct regulator corresponding to the regulator producer, * or IS_ERR() condition containing errno. Other consumers will be - * unable to obtain this reference is held and the use count for the - * regulator will be initialised to reflect the current state of the - * regulator. + * unable to obtain this regulator while this reference is held and the + * use count for the regulator will be initialised to reflect the current + * state of the regulator. * * This is intended for use by consumers which cannot tolerate shared * use of the regulator such as those which need to force the @@ -1456,10 +1465,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive); * @id: Supply name or regulator ID. * * Returns a struct regulator corresponding to the regulator producer, - * or IS_ERR() condition containing errno. Other consumers will be - * unable to obtain this reference is held and the use count for the - * regulator will be initialised to reflect the current state of the - * regulator. + * or IS_ERR() condition containing errno. * * This is intended for use by consumers for devices which can have * some supplies unconnected in normal use, such as some MMC devices. @@ -1597,9 +1603,10 @@ EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias); * registered any aliases that were registered will be removed * before returning to the caller. */ -int regulator_bulk_register_supply_alias(struct device *dev, const char **id, +int regulator_bulk_register_supply_alias(struct device *dev, + const char *const *id, struct device *alias_dev, - const char **alias_id, + const char *const *alias_id, int num_id) { int i; @@ -1637,7 +1644,7 @@ EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias); * aliases in one operation. */ void regulator_bulk_unregister_supply_alias(struct device *dev, - const char **id, + const char *const *id, int num_id) { int i; @@ -2321,6 +2328,10 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, regulator_list_voltage_linear) ret = regulator_map_voltage_linear(rdev, min_uV, max_uV); + else if (rdev->desc->ops->list_voltage == + regulator_list_voltage_linear_range) + ret = regulator_map_voltage_linear_range(rdev, + min_uV, max_uV); else ret = regulator_map_voltage_iterate(rdev, min_uV, max_uV); @@ -3447,7 +3458,7 @@ regulator_register(const struct regulator_desc *regulator_desc, /* register with sysfs */ rdev->dev.class = ®ulator_class; - rdev->dev.of_node = config->of_node; + rdev->dev.of_node = of_node_get(config->of_node); rdev->dev.parent = dev; dev_set_name(&rdev->dev, "regulator.%d", atomic_inc_return(®ulator_no) - 1); @@ -3589,6 +3600,7 @@ void regulator_unregister(struct regulator_dev *rdev) list_del(&rdev->list); kfree(rdev->constraints); regulator_ena_gpio_free(rdev); + of_node_put(rdev->dev.of_node); device_unregister(&rdev->dev); mutex_unlock(®ulator_list_mutex); } @@ -3819,8 +3831,9 @@ static int __init regulator_init_complete(void) mutex_lock(®ulator_list_mutex); /* If we have a full configuration then disable any regulators - * which are not in use or always_on. This will become the - * default behaviour in the future. + * we have permission to change the status for and which are + * not in use or always_on. This is effectively the default + * for DT and ACPI as they have full constraints. */ list_for_each_entry(rdev, ®ulator_list, list) { ops = rdev->desc->ops; @@ -3829,6 +3842,9 @@ static int __init regulator_init_complete(void) if (c && c->always_on) continue; + if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS)) + continue; + mutex_lock(&rdev->mutex); if (rdev->use_count) @@ -3867,4 +3883,4 @@ unlock: return 0; } -late_initcall(regulator_init_complete); +late_initcall_sync(regulator_init_complete); diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c index f44818b838dc..8f785bc9e510 100644 --- a/drivers/regulator/devres.c +++ b/drivers/regulator/devres.c @@ -360,9 +360,9 @@ EXPORT_SYMBOL_GPL(devm_regulator_unregister_supply_alias); * will be removed before returning to the caller. */ int devm_regulator_bulk_register_supply_alias(struct device *dev, - const char **id, + const char *const *id, struct device *alias_dev, - const char **alias_id, + const char *const *alias_id, int num_id) { int i; @@ -404,7 +404,7 @@ EXPORT_SYMBOL_GPL(devm_regulator_bulk_register_supply_alias); * will ensure that the resource is freed. */ void devm_regulator_bulk_unregister_supply_alias(struct device *dev, - const char **id, + const char *const *id, int num_id) { int i; diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index c61f7e97e4f8..354105eff1f8 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -50,7 +50,6 @@ of_get_fixed_voltage_config(struct device *dev) { struct fixed_voltage_config *config; struct device_node *np = dev->of_node; - const __be32 *delay; struct regulator_init_data *init_data; config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config), @@ -91,15 +90,11 @@ of_get_fixed_voltage_config(struct device *dev) if ((config->gpio == -ENODEV) || (config->gpio == -EPROBE_DEFER)) return ERR_PTR(-EPROBE_DEFER); - delay = of_get_property(np, "startup-delay-us", NULL); - if (delay) - config->startup_delay = be32_to_cpu(*delay); + of_property_read_u32(np, "startup-delay-us", &config->startup_delay); - if (of_find_property(np, "enable-active-high", NULL)) - config->enable_high = true; - - if (of_find_property(np, "gpio-open-drain", NULL)) - config->gpio_is_open_drain = true; + config->enable_high = of_property_read_bool(np, "enable-active-high"); + config->gpio_is_open_drain = of_property_read_bool(np, + "gpio-open-drain"); if (of_find_property(np, "vin-supply", NULL)) config->input_supply = "vin"; diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c new file mode 100644 index 000000000000..110a99ee1162 --- /dev/null +++ b/drivers/regulator/ltc3589.c @@ -0,0 +1,554 @@ +/* + * Linear Technology LTC3589,LTC3589-1 regulator support + * + * Copyright (c) 2014 Philipp Zabel , Pengutronix + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "ltc3589" + +#define LTC3589_IRQSTAT 0x02 +#define LTC3589_SCR1 0x07 +#define LTC3589_OVEN 0x10 +#define LTC3589_SCR2 0x12 +#define LTC3589_PGSTAT 0x13 +#define LTC3589_VCCR 0x20 +#define LTC3589_CLIRQ 0x21 +#define LTC3589_B1DTV1 0x23 +#define LTC3589_B1DTV2 0x24 +#define LTC3589_VRRCR 0x25 +#define LTC3589_B2DTV1 0x26 +#define LTC3589_B2DTV2 0x27 +#define LTC3589_B3DTV1 0x29 +#define LTC3589_B3DTV2 0x2a +#define LTC3589_L2DTV1 0x32 +#define LTC3589_L2DTV2 0x33 + +#define LTC3589_IRQSTAT_PGOOD_TIMEOUT BIT(3) +#define LTC3589_IRQSTAT_UNDERVOLT_WARN BIT(4) +#define LTC3589_IRQSTAT_UNDERVOLT_FAULT BIT(5) +#define LTC3589_IRQSTAT_THERMAL_WARN BIT(6) +#define LTC3589_IRQSTAT_THERMAL_FAULT BIT(7) + +#define LTC3589_OVEN_SW1 BIT(0) +#define LTC3589_OVEN_SW2 BIT(1) +#define LTC3589_OVEN_SW3 BIT(2) +#define LTC3589_OVEN_BB_OUT BIT(3) +#define LTC3589_OVEN_LDO2 BIT(4) +#define LTC3589_OVEN_LDO3 BIT(5) +#define LTC3589_OVEN_LDO4 BIT(6) +#define LTC3589_OVEN_SW_CTRL BIT(7) + +#define LTC3589_VCCR_SW1_GO BIT(0) +#define LTC3589_VCCR_SW2_GO BIT(2) +#define LTC3589_VCCR_SW3_GO BIT(4) +#define LTC3589_VCCR_LDO2_GO BIT(6) + +enum ltc3589_variant { + LTC3589, + LTC3589_1, + LTC3589_2, +}; + +enum ltc3589_reg { + LTC3589_SW1, + LTC3589_SW2, + LTC3589_SW3, + LTC3589_BB_OUT, + LTC3589_LDO1, + LTC3589_LDO2, + LTC3589_LDO3, + LTC3589_LDO4, + LTC3589_NUM_REGULATORS, +}; + +struct ltc3589_regulator { + struct regulator_desc desc; + + /* External feedback voltage divider */ + unsigned int r1; + unsigned int r2; +}; + +struct ltc3589 { + struct regmap *regmap; + struct device *dev; + enum ltc3589_variant variant; + struct ltc3589_regulator regulator_descs[LTC3589_NUM_REGULATORS]; + struct regulator_dev *regulators[LTC3589_NUM_REGULATORS]; +}; + +static const int ltc3589_ldo4[] = { + 2800000, 2500000, 1800000, 3300000, +}; + +static const int ltc3589_12_ldo4[] = { + 1200000, 1800000, 2500000, 3200000, +}; + +static int ltc3589_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev); + int sel, shift; + + if (unlikely(ramp_delay <= 0)) + return -EINVAL; + + /* VRRCR slew rate offsets are the same as VCCR go bit offsets */ + shift = ffs(rdev->desc->apply_bit) - 1; + + /* The slew rate can be set to 0.88, 1.75, 3.5, or 7 mV/uS */ + for (sel = 0; sel < 4; sel++) { + if ((880 << sel) >= ramp_delay) { + return regmap_update_bits(ltc3589->regmap, + LTC3589_VRRCR, + 0x3 << shift, sel << shift); + } + } + return -EINVAL; +} + +static int ltc3589_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev); + int sel; + + sel = regulator_map_voltage_linear(rdev, uV, uV); + if (sel < 0) + return sel; + + /* DTV2 register follows right after the corresponding DTV1 register */ + return regmap_update_bits(ltc3589->regmap, rdev->desc->vsel_reg + 1, + rdev->desc->vsel_mask, sel); +} + +static int ltc3589_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct ltc3589 *ltc3589 = rdev_get_drvdata(rdev); + int mask, bit = 0; + + /* VCCR reference selects are right next to the VCCR go bits */ + mask = rdev->desc->apply_bit << 1; + + if (mode == REGULATOR_MODE_STANDBY) + bit = mask; /* Select DTV2 */ + + mask |= rdev->desc->apply_bit; + bit |= rdev->desc->apply_bit; + return regmap_update_bits(ltc3589->regmap, LTC3589_VCCR, mask, bit); +} + +/* SW1, SW2, SW3, LDO2 */ +static struct regulator_ops ltc3589_linear_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_ramp_delay = ltc3589_set_ramp_delay, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_voltage = ltc3589_set_suspend_voltage, + .set_suspend_mode = ltc3589_set_suspend_mode, +}; + +/* BB_OUT, LDO3 */ +static struct regulator_ops ltc3589_fixed_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +/* LDO1 */ +static struct regulator_ops ltc3589_fixed_standby_regulator_ops = { +}; + +/* LDO4 */ +static struct regulator_ops ltc3589_table_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + + +#define LTC3589_REG(_name, _ops, en_bit, dtv1_reg, dtv_mask, go_bit) \ + [LTC3589_ ## _name] = { \ + .desc = { \ + .name = #_name, \ + .n_voltages = (dtv_mask) + 1, \ + .min_uV = (go_bit) ? 362500 : 0, \ + .uV_step = (go_bit) ? 12500 : 0, \ + .ramp_delay = (go_bit) ? 1750 : 0, \ + .fixed_uV = (dtv_mask) ? 0 : 800000, \ + .ops = <c3589_ ## _ops ## _regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = LTC3589_ ## _name, \ + .owner = THIS_MODULE, \ + .vsel_reg = (dtv1_reg), \ + .vsel_mask = (dtv_mask), \ + .apply_reg = (go_bit) ? LTC3589_VCCR : 0, \ + .apply_bit = (go_bit), \ + .enable_reg = (en_bit) ? LTC3589_OVEN : 0, \ + .enable_mask = (en_bit), \ + }, \ + } + +#define LTC3589_LINEAR_REG(_name, _dtv1) \ + LTC3589_REG(_name, linear, LTC3589_OVEN_ ## _name, \ + LTC3589_ ## _dtv1, 0x1f, \ + LTC3589_VCCR_ ## _name ## _GO) + +#define LTC3589_FIXED_REG(_name) \ + LTC3589_REG(_name, fixed, LTC3589_OVEN_ ## _name, 0, 0, 0) + +static struct ltc3589_regulator ltc3589_regulators[LTC3589_NUM_REGULATORS] = { + LTC3589_LINEAR_REG(SW1, B1DTV1), + LTC3589_LINEAR_REG(SW2, B2DTV1), + LTC3589_LINEAR_REG(SW3, B3DTV1), + LTC3589_FIXED_REG(BB_OUT), + LTC3589_REG(LDO1, fixed_standby, 0, 0, 0, 0), + LTC3589_LINEAR_REG(LDO2, L2DTV1), + LTC3589_FIXED_REG(LDO3), + LTC3589_REG(LDO4, table, LTC3589_OVEN_LDO4, LTC3589_L2DTV2, 0x60, 0), +}; + +#ifdef CONFIG_OF +static struct of_regulator_match ltc3589_matches[LTC3589_NUM_REGULATORS] = { + { .name = "sw1", }, + { .name = "sw2", }, + { .name = "sw3", }, + { .name = "bb-out", }, + { .name = "ldo1", }, /* standby */ + { .name = "ldo2", }, + { .name = "ldo3", }, + { .name = "ldo4", }, +}; + +static int ltc3589_parse_regulators_dt(struct ltc3589 *ltc3589) +{ + struct device *dev = ltc3589->dev; + struct device_node *node; + int i, ret; + + node = of_find_node_by_name(dev->of_node, "regulators"); + if (!node) { + dev_err(dev, "regulators node not found\n"); + return -EINVAL; + } + + ret = of_regulator_match(dev, node, ltc3589_matches, + ARRAY_SIZE(ltc3589_matches)); + of_node_put(node); + if (ret < 0) { + dev_err(dev, "Error parsing regulator init data: %d\n", ret); + return ret; + } + if (ret != LTC3589_NUM_REGULATORS) { + dev_err(dev, "Only %d regulators described in device tree\n", + ret); + return -EINVAL; + } + + /* Parse feedback voltage dividers. LDO3 and LDO4 don't have them */ + for (i = 0; i < LTC3589_LDO3; i++) { + struct ltc3589_regulator *desc = <c3589->regulator_descs[i]; + struct device_node *np = ltc3589_matches[i].of_node; + u32 vdiv[2]; + + ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", + vdiv, 2); + if (ret) { + dev_err(dev, "Failed to parse voltage divider: %d\n", + ret); + return ret; + } + + desc->r1 = vdiv[0]; + desc->r2 = vdiv[1]; + } + + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return ltc3589_matches[index].init_data; +} + +static inline struct device_node *match_of_node(int index) +{ + return ltc3589_matches[index].of_node; +} +#else +static inline int ltc3589_parse_regulators_dt(struct ltc3589 *ltc3589) +{ + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return NULL; +} + +static inline struct device_node *match_of_node(int index) +{ + return NULL; +} +#endif + +static bool ltc3589_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3589_IRQSTAT: + case LTC3589_SCR1: + case LTC3589_OVEN: + case LTC3589_SCR2: + case LTC3589_VCCR: + case LTC3589_CLIRQ: + case LTC3589_B1DTV1: + case LTC3589_B1DTV2: + case LTC3589_VRRCR: + case LTC3589_B2DTV1: + case LTC3589_B2DTV2: + case LTC3589_B3DTV1: + case LTC3589_B3DTV2: + case LTC3589_L2DTV1: + case LTC3589_L2DTV2: + return true; + } + return false; +} + +static bool ltc3589_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3589_IRQSTAT: + case LTC3589_SCR1: + case LTC3589_OVEN: + case LTC3589_SCR2: + case LTC3589_PGSTAT: + case LTC3589_VCCR: + case LTC3589_B1DTV1: + case LTC3589_B1DTV2: + case LTC3589_VRRCR: + case LTC3589_B2DTV1: + case LTC3589_B2DTV2: + case LTC3589_B3DTV1: + case LTC3589_B3DTV2: + case LTC3589_L2DTV1: + case LTC3589_L2DTV2: + return true; + } + return false; +} + +static bool ltc3589_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3589_IRQSTAT: + case LTC3589_PGSTAT: + return true; + } + return false; +} + +struct reg_default ltc3589_reg_defaults[] = { + { LTC3589_SCR1, 0x00 }, + { LTC3589_OVEN, 0x00 }, + { LTC3589_SCR2, 0x00 }, + { LTC3589_VCCR, 0x00 }, + { LTC3589_B1DTV1, 0x19 }, + { LTC3589_B1DTV2, 0x19 }, + { LTC3589_VRRCR, 0xff }, + { LTC3589_B2DTV1, 0x19 }, + { LTC3589_B2DTV2, 0x19 }, + { LTC3589_B3DTV1, 0x19 }, + { LTC3589_B3DTV2, 0x19 }, + { LTC3589_L2DTV1, 0x19 }, + { LTC3589_L2DTV2, 0x19 }, +}; + +static const struct regmap_config ltc3589_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = ltc3589_writeable_reg, + .readable_reg = ltc3589_readable_reg, + .volatile_reg = ltc3589_volatile_reg, + .max_register = LTC3589_L2DTV2, + .reg_defaults = ltc3589_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(ltc3589_reg_defaults), + .use_single_rw = true, + .cache_type = REGCACHE_RBTREE, +}; + + +static irqreturn_t ltc3589_isr(int irq, void *dev_id) +{ + struct ltc3589 *ltc3589 = dev_id; + unsigned int i, irqstat, event; + + regmap_read(ltc3589->regmap, LTC3589_IRQSTAT, &irqstat); + + if (irqstat & LTC3589_IRQSTAT_THERMAL_WARN) { + event = REGULATOR_EVENT_OVER_TEMP; + for (i = 0; i < LTC3589_NUM_REGULATORS; i++) + regulator_notifier_call_chain(ltc3589->regulators[i], + event, NULL); + } + + if (irqstat & LTC3589_IRQSTAT_UNDERVOLT_WARN) { + event = REGULATOR_EVENT_UNDER_VOLTAGE; + for (i = 0; i < LTC3589_NUM_REGULATORS; i++) + regulator_notifier_call_chain(ltc3589->regulators[i], + event, NULL); + } + + /* Clear warning condition */ + regmap_write(ltc3589->regmap, LTC3589_CLIRQ, 0); + + return IRQ_HANDLED; +} + +static inline unsigned int ltc3589_scale(unsigned int uV, u32 r1, u32 r2) +{ + uint64_t tmp; + if (uV == 0) + return 0; + tmp = (uint64_t)uV * r1; + do_div(tmp, r2); + return uV + (unsigned int)tmp; +} + +static void ltc3589_apply_fb_voltage_divider(struct ltc3589_regulator *rdesc) +{ + struct regulator_desc *desc = &rdesc->desc; + + if (!rdesc->r1 || !rdesc->r2) + return; + + desc->min_uV = ltc3589_scale(desc->min_uV, rdesc->r1, rdesc->r2); + desc->uV_step = ltc3589_scale(desc->uV_step, rdesc->r1, rdesc->r2); + desc->fixed_uV = ltc3589_scale(desc->fixed_uV, rdesc->r1, rdesc->r2); +} + +static int ltc3589_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ltc3589_regulator *descs; + struct ltc3589 *ltc3589; + int i, ret; + + ltc3589 = devm_kzalloc(dev, sizeof(*ltc3589), GFP_KERNEL); + if (!ltc3589) + return -ENOMEM; + + i2c_set_clientdata(client, ltc3589); + ltc3589->variant = id->driver_data; + ltc3589->dev = dev; + + descs = ltc3589->regulator_descs; + memcpy(descs, ltc3589_regulators, sizeof(ltc3589_regulators)); + if (ltc3589->variant == LTC3589) { + descs[LTC3589_LDO3].desc.fixed_uV = 1800000; + descs[LTC3589_LDO4].desc.volt_table = ltc3589_ldo4; + } else { + descs[LTC3589_LDO3].desc.fixed_uV = 2800000; + descs[LTC3589_LDO4].desc.volt_table = ltc3589_12_ldo4; + } + + ltc3589->regmap = devm_regmap_init_i2c(client, <c3589_regmap_config); + if (IS_ERR(ltc3589->regmap)) { + ret = PTR_ERR(ltc3589->regmap); + dev_err(dev, "failed to initialize regmap: %d\n", ret); + return ret; + } + + ret = ltc3589_parse_regulators_dt(ltc3589); + if (ret) + return ret; + + for (i = 0; i < LTC3589_NUM_REGULATORS; i++) { + struct ltc3589_regulator *rdesc = <c3589->regulator_descs[i]; + struct regulator_desc *desc = &rdesc->desc; + struct regulator_init_data *init_data; + struct regulator_config config = { }; + + init_data = match_init_data(i); + + if (i < LTC3589_LDO3) + ltc3589_apply_fb_voltage_divider(rdesc); + + config.dev = dev; + config.init_data = init_data; + config.driver_data = ltc3589; + config.of_node = match_of_node(i); + + ltc3589->regulators[i] = devm_regulator_register(dev, desc, + &config); + if (IS_ERR(ltc3589->regulators[i])) { + ret = PTR_ERR(ltc3589->regulators[i]); + dev_err(dev, "failed to register regulator %s: %d\n", + desc->name, ret); + return ret; + } + } + + ret = devm_request_threaded_irq(dev, client->irq, NULL, ltc3589_isr, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, ltc3589); + if (ret) { + dev_err(dev, "Failed to request IRQ: %d\n", ret); + return ret; + } + + return 0; +} + +static struct i2c_device_id ltc3589_i2c_id[] = { + { "ltc3589", LTC3589 }, + { "ltc3589-1", LTC3589_1 }, + { "ltc3589-2", LTC3589_2 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc3589_i2c_id); + +static struct i2c_driver ltc3589_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = ltc3589_probe, + .id_table = ltc3589_i2c_id, +}; +module_i2c_driver(ltc3589_driver); + +MODULE_AUTHOR("Philipp Zabel "); +MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC3589(-1,2)"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("i2c:ltc3589"); diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index 3172da847d24..c8bddcc8f911 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -161,10 +161,8 @@ static int max8649_regulator_probe(struct i2c_client *client, info = devm_kzalloc(&client->dev, sizeof(struct max8649_regulator_info), GFP_KERNEL); - if (!info) { - dev_err(&client->dev, "No enough memory\n"); + if (!info) return -ENOMEM; - } info->regmap = devm_regmap_init_i2c(client, &max8649_regmap_config); if (IS_ERR(info->regmap)) { diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index d920f5a32ec8..c2792f0271ab 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -129,7 +129,7 @@ static const struct regulator_desc regulator = { }; #ifdef CONFIG_OF -static struct of_device_id max8952_dt_match[] = { +static const struct of_device_id max8952_dt_match[] = { { .compatible = "maxim,max8952" }, {}, }; diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index ea4f36f2cbe2..ee5e67bc8d5b 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -19,9 +19,7 @@ static void of_get_regulation_constraints(struct device_node *np, struct regulator_init_data **init_data) { - const __be32 *min_uV, *max_uV, *uV_offset; - const __be32 *min_uA, *max_uA, *ramp_delay; - struct property *prop; + const __be32 *min_uV, *max_uV; struct regulation_constraints *constraints = &(*init_data)->constraints; int ret; u32 pval; @@ -42,36 +40,29 @@ static void of_get_regulation_constraints(struct device_node *np, if (min_uV && max_uV && constraints->min_uV == constraints->max_uV) constraints->apply_uV = true; - uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL); - if (uV_offset) - constraints->uV_offset = be32_to_cpu(*uV_offset); - min_uA = of_get_property(np, "regulator-min-microamp", NULL); - if (min_uA) - constraints->min_uA = be32_to_cpu(*min_uA); - max_uA = of_get_property(np, "regulator-max-microamp", NULL); - if (max_uA) - constraints->max_uA = be32_to_cpu(*max_uA); + if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval)) + constraints->uV_offset = pval; + if (!of_property_read_u32(np, "regulator-min-microamp", &pval)) + constraints->min_uA = pval; + if (!of_property_read_u32(np, "regulator-max-microamp", &pval)) + constraints->max_uA = pval; /* Current change possible? */ if (constraints->min_uA != constraints->max_uA) constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT; - if (of_find_property(np, "regulator-boot-on", NULL)) - constraints->boot_on = true; - - if (of_find_property(np, "regulator-always-on", NULL)) - constraints->always_on = true; - else /* status change should be possible if not always on. */ + constraints->boot_on = of_property_read_bool(np, "regulator-boot-on"); + constraints->always_on = of_property_read_bool(np, "regulator-always-on"); + if (!constraints->always_on) /* status change should be possible. */ constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS; if (of_property_read_bool(np, "regulator-allow-bypass")) constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS; - prop = of_find_property(np, "regulator-ramp-delay", NULL); - if (prop && prop->value) { - ramp_delay = prop->value; - if (*ramp_delay) - constraints->ramp_delay = be32_to_cpu(*ramp_delay); + ret = of_property_read_u32(np, "regulator-ramp-delay", &pval); + if (!ret) { + if (pval) + constraints->ramp_delay = pval; else constraints->ramp_disable = true; } @@ -106,6 +97,20 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev, } EXPORT_SYMBOL_GPL(of_get_regulator_init_data); +struct devm_of_regulator_matches { + struct of_regulator_match *matches; + unsigned int num_matches; +}; + +static void devm_of_regulator_put_matches(struct device *dev, void *res) +{ + struct devm_of_regulator_matches *devm_matches = res; + int i; + + for (i = 0; i < devm_matches->num_matches; i++) + of_node_put(devm_matches->matches[i].of_node); +} + /** * of_regulator_match - extract multiple regulator init data from device tree. * @dev: device requesting the data @@ -119,7 +124,8 @@ EXPORT_SYMBOL_GPL(of_get_regulator_init_data); * regulator. The data parsed from a child node will be matched to a regulator * based on either the deprecated property regulator-compatible if present, * or otherwise the child node's name. Note that the match table is modified - * in place. + * in place and an additional of_node reference is taken for each matched + * regulator. * * Returns the number of matches found or a negative error code on failure. */ @@ -131,10 +137,22 @@ int of_regulator_match(struct device *dev, struct device_node *node, unsigned int i; const char *name; struct device_node *child; + struct devm_of_regulator_matches *devm_matches; if (!dev || !node) return -EINVAL; + devm_matches = devres_alloc(devm_of_regulator_put_matches, + sizeof(struct devm_of_regulator_matches), + GFP_KERNEL); + if (!devm_matches) + return -ENOMEM; + + devm_matches->matches = matches; + devm_matches->num_matches = num_matches; + + devres_add(dev, devm_matches); + for (i = 0; i < num_matches; i++) { struct of_regulator_match *match = &matches[i]; match->init_data = NULL; @@ -162,7 +180,7 @@ int of_regulator_match(struct device *dev, struct device_node *node, child->name); return -EINVAL; } - match->of_node = child; + match->of_node = of_node_get(child); count++; break; } diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 9c62b1d34685..864ed02ce4b7 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -36,6 +36,18 @@ struct regs_info { int sleep_id; }; +static const struct regulator_linear_range smps_low_ranges[] = { + REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0), + REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000), + REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0), +}; + +static const struct regulator_linear_range smps_high_ranges[] = { + REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0), + REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000), + REGULATOR_LINEAR_RANGE(3300000, 0x7A, 0x7f, 0), +}; + static const struct regs_info palmas_regs_info[] = { { .name = "SMPS12", @@ -280,54 +292,6 @@ static int palmas_ldo_write(struct palmas *palmas, unsigned int reg, return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value); } -static int palmas_is_enabled_smps(struct regulator_dev *dev) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - unsigned int reg; - - palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); - - reg &= PALMAS_SMPS12_CTRL_STATUS_MASK; - reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT; - - return !!(reg); -} - -static int palmas_enable_smps(struct regulator_dev *dev) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - unsigned int reg; - - palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); - - reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK; - if (pmic->current_reg_mode[id]) - reg |= pmic->current_reg_mode[id]; - else - reg |= SMPS_CTRL_MODE_ON; - - palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg); - - return 0; -} - -static int palmas_disable_smps(struct regulator_dev *dev) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - unsigned int reg; - - palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); - - reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK; - - palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg); - - return 0; -} - static int palmas_set_mode_smps(struct regulator_dev *dev, unsigned int mode) { struct palmas_pmic *pmic = rdev_get_drvdata(dev); @@ -382,81 +346,6 @@ static unsigned int palmas_get_mode_smps(struct regulator_dev *dev) return 0; } -static int palmas_list_voltage_smps(struct regulator_dev *dev, - unsigned selector) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - int mult = 1; - - /* Read the multiplier set in VSEL register to return - * the correct voltage. - */ - if (pmic->range[id]) - mult = 2; - - if (selector == 0) - return 0; - else if (selector < 6) - return 500000 * mult; - else - /* Voltage is linear mapping starting from selector 6, - * volt = (0.49V + ((selector - 5) * 0.01V)) * RANGE - * RANGE is either x1 or x2 - */ - return (490000 + ((selector - 5) * 10000)) * mult; -} - -static int palmas_map_voltage_smps(struct regulator_dev *rdev, - int min_uV, int max_uV) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - int ret, voltage; - - if (min_uV == 0) - return 0; - - if (pmic->range[id]) { /* RANGE is x2 */ - if (min_uV < 1000000) - min_uV = 1000000; - ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 6; - } else { /* RANGE is x1 */ - if (min_uV < 500000) - min_uV = 500000; - ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 6; - } - - /* Map back into a voltage to verify we're still in bounds */ - voltage = palmas_list_voltage_smps(rdev, ret); - if (voltage < min_uV || voltage > max_uV) - return -EINVAL; - - return ret; -} - -static int palma_smps_set_voltage_smps_time_sel(struct regulator_dev *rdev, - unsigned int old_selector, unsigned int new_selector) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - int old_uv, new_uv; - unsigned int ramp_delay = pmic->ramp_delay[id]; - - if (!ramp_delay) - return 0; - - old_uv = palmas_list_voltage_smps(rdev, old_selector); - if (old_uv < 0) - return old_uv; - - new_uv = palmas_list_voltage_smps(rdev, new_selector); - if (new_uv < 0) - return new_uv; - - return DIV_ROUND_UP(abs(old_uv - new_uv), ramp_delay); -} - static int palmas_smps_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { @@ -493,16 +382,16 @@ static int palmas_smps_set_ramp_delay(struct regulator_dev *rdev, } static struct regulator_ops palmas_ops_smps = { - .is_enabled = palmas_is_enabled_smps, - .enable = palmas_enable_smps, - .disable = palmas_disable_smps, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, .set_mode = palmas_set_mode_smps, .get_mode = palmas_get_mode_smps, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, - .list_voltage = palmas_list_voltage_smps, - .map_voltage = palmas_map_voltage_smps, - .set_voltage_time_sel = palma_smps_set_voltage_smps_time_sel, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = palmas_smps_set_ramp_delay, }; @@ -511,9 +400,9 @@ static struct regulator_ops palmas_ops_ext_control_smps = { .get_mode = palmas_get_mode_smps, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, - .list_voltage = palmas_list_voltage_smps, - .map_voltage = palmas_map_voltage_smps, - .set_voltage_time_sel = palma_smps_set_voltage_smps_time_sel, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = palmas_smps_set_ramp_delay, }; @@ -1042,12 +931,17 @@ static int palmas_regulators_probe(struct platform_device *pdev) * ranges. Read the current smps mode for later use. */ addr = palmas_regs_info[id].vsel_addr; + pmic->desc[id].n_linear_ranges = 3; ret = palmas_smps_read(pmic->palmas, addr, ®); if (ret) return ret; if (reg & PALMAS_SMPS12_VOLTAGE_RANGE) pmic->range[id] = 1; + if (pmic->range[id]) + pmic->desc[id].linear_ranges = smps_high_ranges; + else + pmic->desc[id].linear_ranges = smps_low_ranges; if (reg_init && reg_init->roof_floor) pmic->desc[id].ops = @@ -1199,7 +1093,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) return 0; } -static struct of_device_id of_palmas_match_tbl[] = { +static const struct of_device_id of_palmas_match_tbl[] = { { .compatible = "ti,palmas-pmic", }, { .compatible = "ti,twl6035-pmic", }, { .compatible = "ti,twl6036-pmic", }, diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c index 6d38be3d970c..6d02d68dfb46 100644 --- a/drivers/regulator/pbias-regulator.c +++ b/drivers/regulator/pbias-regulator.c @@ -49,33 +49,13 @@ static const unsigned int pbias_volt_table[] = { 3000000 }; -static int pbias_regulator_enable(struct regulator_dev *rdev) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(rdev); - const struct pbias_reg_info *info = data->info; - - return regmap_update_bits(data->syscon, rdev->desc->enable_reg, - info->enable_mask, info->enable); -} - -static int pbias_regulator_is_enable(struct regulator_dev *rdev) -{ - struct pbias_regulator_data *data = rdev_get_drvdata(rdev); - const struct pbias_reg_info *info = data->info; - int value; - - regmap_read(data->syscon, rdev->desc->enable_reg, &value); - - return (value & info->enable_mask) == info->enable; -} - static struct regulator_ops pbias_regulator_voltage_ops = { .list_voltage = regulator_list_voltage_table, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, - .enable = pbias_regulator_enable, + .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, - .is_enabled = pbias_regulator_is_enable, + .is_enabled = regulator_is_enabled_regmap, }; static const struct pbias_reg_info pbias_mmc_omap2430 = { @@ -142,10 +122,8 @@ static int pbias_regulator_probe(struct platform_device *pdev) drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data) * count, GFP_KERNEL); - if (drvdata == NULL) { - dev_err(&pdev->dev, "Failed to allocate device data\n"); + if (!drvdata) return -ENOMEM; - } syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); if (IS_ERR(syscon)) @@ -180,6 +158,7 @@ static int pbias_regulator_probe(struct platform_device *pdev) drvdata[data_idx].desc.vsel_mask = info->vmode; drvdata[data_idx].desc.enable_reg = res->start; drvdata[data_idx].desc.enable_mask = info->enable_mask; + drvdata[data_idx].desc.enable_val = info->enable; cfg.init_data = pbias_matches[idx].init_data; cfg.driver_data = &drvdata[data_idx]; diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 67e678c4301c..c879dff597ee 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -125,6 +125,9 @@ static struct regulator_ops pfuze100_ldo_regulator_ops = { }; static struct regulator_ops pfuze100_fixed_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_linear, }; @@ -137,6 +140,8 @@ static struct regulator_ops pfuze100_sw_regulator_ops = { }; static struct regulator_ops pfuze100_swb_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -189,6 +194,8 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .volt_table = voltages, \ .vsel_reg = (base), \ .vsel_mask = (mask), \ + .enable_reg = (base), \ + .enable_mask = 0x48, \ }, \ } @@ -502,6 +509,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, config.init_data = init_data; config.driver_data = pfuze_chip; config.of_node = match_of_node(i); + config.ena_gpio = -EINVAL; pfuze_chip->regulators[i] = devm_regulator_register(&client->dev, desc, &config); diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c index f19a30f0fb42..ee83b4876420 100644 --- a/drivers/regulator/s2mpa01.c +++ b/drivers/regulator/s2mpa01.c @@ -61,7 +61,7 @@ static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int ramp_delay = 0; int old_volt, new_volt; - switch (rdev->desc->id) { + switch (rdev_get_id(rdev)) { case S2MPA01_BUCK2: case S2MPA01_BUCK4: ramp_delay = s2mpa01->ramp_delay24; @@ -102,7 +102,7 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) unsigned int ramp_enable = 1, enable_shift = 0; int ret; - switch (rdev->desc->id) { + switch (rdev_get_id(rdev)) { case S2MPA01_BUCK1: enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT; if (!ramp_delay) { @@ -116,7 +116,6 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) ramp_delay = s2mpa01->ramp_delay16; ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; - ramp_reg = S2MPA01_REG_RAMP1; break; case S2MPA01_BUCK2: enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT; @@ -192,11 +191,15 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) if (!ramp_enable) goto ramp_disable; - ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, - 1 << enable_shift, 1 << enable_shift); - if (ret) { - dev_err(&rdev->dev, "failed to enable ramp rate\n"); - return ret; + /* Ramp delay can be enabled/disabled only for buck[1234] */ + if (rdev_get_id(rdev) >= S2MPA01_BUCK1 && + rdev_get_id(rdev) <= S2MPA01_BUCK4) { + ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, + 1 << enable_shift, 1 << enable_shift); + if (ret) { + dev_err(&rdev->dev, "failed to enable ramp rate\n"); + return ret; + } } ramp_val = get_ramp_delay(ramp_delay); diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index e713c162fbd4..02e2fb2fca66 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -44,6 +45,8 @@ struct s2mps11_info { * was enabled. */ unsigned int s2mps14_suspend_state:30; + /* Array of size rdev_num with GPIO-s for external sleep control */ + int *ext_control_gpio; }; static int get_ramp_delay(int ramp_delay) @@ -202,11 +205,16 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) if (!ramp_enable) goto ramp_disable; - ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP, - 1 << enable_shift, 1 << enable_shift); - if (ret) { - dev_err(&rdev->dev, "failed to enable ramp rate\n"); - return ret; + /* Ramp delay can be enabled/disabled only for buck[2346] */ + if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 && + rdev_get_id(rdev) <= S2MPS11_BUCK4) || + rdev_get_id(rdev) == S2MPS11_BUCK6) { + ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP, + 1 << enable_shift, 1 << enable_shift); + if (ret) { + dev_err(&rdev->dev, "failed to enable ramp rate\n"); + return ret; + } } ramp_val = get_ramp_delay(ramp_delay); @@ -409,6 +417,8 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev) if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev))) val = S2MPS14_ENABLE_SUSPEND; + else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)])) + val = S2MPS14_ENABLE_EXT_CONTROL; else val = rdev->desc->enable_mask; @@ -565,12 +575,61 @@ static const struct regulator_desc s2mps14_regulators[] = { regulator_desc_s2mps14_buck1235(5), }; +static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11, + struct regulator_dev *rdev) +{ + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, S2MPS14_ENABLE_EXT_CONTROL); +} + +static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev, + struct of_regulator_match *rdata, struct s2mps11_info *s2mps11) +{ + int *gpio = s2mps11->ext_control_gpio; + unsigned int i; + unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11, + S2MPS14_LDO12 }; + + for (i = 0; i < ARRAY_SIZE(valid_regulators); i++) { + unsigned int reg = valid_regulators[i]; + + if (!rdata[reg].init_data || !rdata[reg].of_node) + continue; + + gpio[reg] = of_get_named_gpio(rdata[reg].of_node, + "samsung,ext-control-gpios", 0); + if (gpio_is_valid(gpio[reg])) + dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n", + gpio[reg], reg, rdata[reg].name); + } +} + +static int s2mps11_pmic_dt_parse(struct platform_device *pdev, + struct of_regulator_match *rdata, struct s2mps11_info *s2mps11, + enum sec_device_type dev_type) +{ + struct device_node *reg_np; + + reg_np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators"); + if (!reg_np) { + dev_err(&pdev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num); + if (dev_type == S2MPS14X) + s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11); + + of_node_put(reg_np); + + return 0; +} + static int s2mps11_pmic_probe(struct platform_device *pdev) { struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct sec_platform_data *pdata = iodev->pdata; + struct sec_platform_data *pdata = NULL; struct of_regulator_match *rdata = NULL; - struct device_node *reg_np = NULL; struct regulator_config config = { }; struct s2mps11_info *s2mps11; int i, ret = 0; @@ -597,8 +656,21 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) return -EINVAL; }; + s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev, + sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num, + GFP_KERNEL); + if (!s2mps11->ext_control_gpio) + return -ENOMEM; + /* + * 0 is a valid GPIO so initialize all GPIO-s to negative value + * to indicate that external control won't be used for this regulator. + */ + for (i = 0; i < s2mps11->rdev_num; i++) + s2mps11->ext_control_gpio[i] = -EINVAL; + if (!iodev->dev->of_node) { - if (pdata) { + if (iodev->pdata) { + pdata = iodev->pdata; goto common_reg; } else { dev_err(pdev->dev.parent, @@ -614,15 +686,9 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) for (i = 0; i < s2mps11->rdev_num; i++) rdata[i].name = regulators[i].name; - reg_np = of_get_child_by_name(iodev->dev->of_node, "regulators"); - if (!reg_np) { - dev_err(&pdev->dev, "could not find regulators sub-node\n"); - ret = -EINVAL; + ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11, dev_type); + if (ret) goto out; - } - - of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num); - of_node_put(reg_np); common_reg: platform_set_drvdata(pdev, s2mps11); @@ -630,16 +696,18 @@ common_reg: config.dev = &pdev->dev; config.regmap = iodev->regmap_pmic; config.driver_data = s2mps11; + config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH; for (i = 0; i < s2mps11->rdev_num; i++) { struct regulator_dev *regulator; - if (!reg_np) { + if (pdata) { config.init_data = pdata->regulators[i].initdata; config.of_node = pdata->regulators[i].reg_node; } else { config.init_data = rdata[i].init_data; config.of_node = rdata[i].of_node; } + config.ena_gpio = s2mps11->ext_control_gpio[i]; regulator = devm_regulator_register(&pdev->dev, ®ulators[i], &config); @@ -649,6 +717,17 @@ common_reg: i); goto out; } + + if (gpio_is_valid(s2mps11->ext_control_gpio[i])) { + ret = s2mps14_pmic_enable_ext_control(s2mps11, + regulator); + if (ret < 0) { + dev_err(&pdev->dev, + "failed to enable GPIO control over %s: %d\n", + regulator->desc->name, ret); + goto out; + } + } } out: diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 92f19a005dc3..c79af943a5c0 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -28,7 +28,6 @@ struct s5m8767_info { struct device *dev; struct sec_pmic_dev *iodev; int num_regulators; - struct regulator_dev **rdev; struct sec_opmode_data *opmode; int ramp_delay; @@ -529,16 +528,6 @@ static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev, return 0; } -static void s5m8767_pmic_dt_parse_ext_control_gpio(struct sec_pmic_dev *iodev, - struct sec_regulator_data *rdata, - struct device_node *reg_np) -{ - rdata->ext_control_gpio = of_get_named_gpio(reg_np, - "s5m8767,pmic-ext-control-gpios", 0); - if (!gpio_is_valid(rdata->ext_control_gpio)) - rdata->ext_control_gpio = 0; -} - static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, struct sec_platform_data *pdata) { @@ -587,7 +576,8 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, continue; } - s5m8767_pmic_dt_parse_ext_control_gpio(iodev, rdata, reg_np); + rdata->ext_control_gpio = of_get_named_gpio(reg_np, + "s5m8767,pmic-ext-control-gpios", 0); rdata->id = i; rdata->initdata = of_get_regulator_init_data( @@ -695,7 +685,6 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct sec_platform_data *pdata = iodev->pdata; struct regulator_config config = { }; - struct regulator_dev **rdev; struct s5m8767_info *s5m8767; int i, ret, size, buck_init; @@ -737,11 +726,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) return -ENOMEM; size = sizeof(struct regulator_dev *) * (S5M8767_REG_MAX - 2); - s5m8767->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!s5m8767->rdev) - return -ENOMEM; - rdev = s5m8767->rdev; s5m8767->dev = &pdev->dev; s5m8767->iodev = iodev; s5m8767->num_regulators = pdata->num_regulators; @@ -938,6 +923,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) const struct sec_voltage_desc *desc; int id = pdata->regulators[i].id; int enable_reg, enable_val; + struct regulator_dev *rdev; desc = reg_voltage_map[id]; if (desc) { @@ -964,26 +950,27 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) config.driver_data = s5m8767; config.regmap = iodev->regmap_pmic; config.of_node = pdata->regulators[i].reg_node; - config.ena_gpio = config.ena_gpio_flags = 0; - if (pdata->regulators[i].ext_control_gpio) + config.ena_gpio = -EINVAL; + config.ena_gpio_flags = 0; + if (gpio_is_valid(pdata->regulators[i].ext_control_gpio)) s5m8767_regulator_config_ext_control(s5m8767, &pdata->regulators[i], &config); - rdev[i] = devm_regulator_register(&pdev->dev, ®ulators[id], + rdev = devm_regulator_register(&pdev->dev, ®ulators[id], &config); - if (IS_ERR(rdev[i])) { - ret = PTR_ERR(rdev[i]); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); dev_err(s5m8767->dev, "regulator init failed for %d\n", id); return ret; } - if (pdata->regulators[i].ext_control_gpio) { - ret = s5m8767_enable_ext_control(s5m8767, rdev[i]); + if (gpio_is_valid(pdata->regulators[i].ext_control_gpio)) { + ret = s5m8767_enable_ext_control(s5m8767, rdev); if (ret < 0) { dev_err(s5m8767->dev, "failed to enable gpio control over %s: %d\n", - rdev[i]->desc->name, ret); + rdev->desc->name, ret); return ret; } } diff --git a/drivers/regulator/st-pwm.c b/drivers/regulator/st-pwm.c index e367af1c5f9d..5ea78df449f8 100644 --- a/drivers/regulator/st-pwm.c +++ b/drivers/regulator/st-pwm.c @@ -118,7 +118,7 @@ static const struct st_pwm_regulator_pdata b2105_info = { .duty_cycle_table = b2105_duty_cycle_table, }; -static struct of_device_id st_pwm_of_match[] = { +static const struct of_device_id st_pwm_of_match[] = { { .compatible = "st,b2105-pwm-regulator", .data = &b2105_info, }, { }, }; diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c index 2e92ef68574d..2064b3fd45f7 100644 --- a/drivers/regulator/tps65090-regulator.c +++ b/drivers/regulator/tps65090-regulator.c @@ -17,6 +17,7 @@ */ #include +#include #include #include #include @@ -28,49 +29,216 @@ #include #include +#define MAX_CTRL_READ_TRIES 5 +#define MAX_FET_ENABLE_TRIES 1000 + +#define CTRL_EN_BIT 0 /* Regulator enable bit, active high */ +#define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */ +#define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */ +#define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */ + +#define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */ + +/** + * struct tps65090_regulator - Per-regulator data for a tps65090 regulator + * + * @dev: Pointer to our device. + * @desc: The struct regulator_desc for the regulator. + * @rdev: The struct regulator_dev for the regulator. + * @overcurrent_wait_valid: True if overcurrent_wait is valid. + * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield. + */ + struct tps65090_regulator { struct device *dev; struct regulator_desc *desc; struct regulator_dev *rdev; + bool overcurrent_wait_valid; + int overcurrent_wait; }; static struct regulator_ops tps65090_ext_control_ops = { }; -static struct regulator_ops tps65090_reg_contol_ops = { +/** + * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait + * + * This will set the overcurrent wait time based on what's in the regulator + * info. + * + * @ri: Overall regulator data + * @rdev: Regulator device + * + * Return: 0 if no error, non-zero if there was an error writing the register. + */ +static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri, + struct regulator_dev *rdev) +{ + int ret; + + ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + MAX_OVERCURRENT_WAIT << CTRL_WT_BIT, + ri->overcurrent_wait << CTRL_WT_BIT); + if (ret) { + dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n", + rdev->desc->enable_reg); + } + + return ret; +} + +/** + * tps65090_try_enable_fet - Try to enable a FET + * + * @rdev: Regulator device + * + * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get + * set, or some other -ve value if another error occurred (e.g. i2c error) + */ +static int tps65090_try_enable_fet(struct regulator_dev *rdev) +{ + unsigned int control; + int ret, i; + + ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, + rdev->desc->enable_mask); + if (ret < 0) { + dev_err(&rdev->dev, "Error in updating reg %#x\n", + rdev->desc->enable_reg); + return ret; + } + + for (i = 0; i < MAX_CTRL_READ_TRIES; i++) { + ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, + &control); + if (ret < 0) + return ret; + + if (!(control & BIT(CTRL_TO_BIT))) + break; + + usleep_range(1000, 1500); + } + if (!(control & BIT(CTRL_PG_BIT))) + return -ENOTRECOVERABLE; + + return 0; +} + +/** + * tps65090_fet_enable - Enable a FET, trying a few times if it fails + * + * Some versions of the tps65090 have issues when turning on the FETs. + * This function goes through several steps to ensure the best chance of the + * FET going on. Specifically: + * - We'll make sure that we bump the "overcurrent wait" to the maximum, which + * increases the chances that we'll turn on properly. + * - We'll retry turning the FET on multiple times (turning off in between). + * + * @rdev: Regulator device + * + * Return: 0 if ok, non-zero if it fails. + */ +static int tps65090_fet_enable(struct regulator_dev *rdev) +{ + int ret, tries; + + /* + * Try enabling multiple times until we succeed since sometimes the + * first try times out. + */ + tries = 0; + while (true) { + ret = tps65090_try_enable_fet(rdev); + if (!ret) + break; + if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES) + goto err; + + /* Try turning the FET off (and then on again) */ + ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, 0); + if (ret) + goto err; + + tries++; + } + + if (tries) + dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n", + rdev->desc->enable_reg, tries); + + return 0; +err: + dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg); + WARN_ON(1); + + return ret; +} + +static struct regulator_ops tps65090_reg_control_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, }; +static struct regulator_ops tps65090_fet_control_ops = { + .enable = tps65090_fet_enable, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + static struct regulator_ops tps65090_ldo_ops = { }; -#define tps65090_REG_DESC(_id, _sname, _en_reg, _ops) \ +#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _ops) \ { \ .name = "TPS65090_RAILS"#_id, \ .supply_name = _sname, \ .id = TPS65090_REGULATOR_##_id, \ .ops = &_ops, \ .enable_reg = _en_reg, \ - .enable_mask = BIT(0), \ + .enable_val = _en_bits, \ + .enable_mask = _en_bits, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ } static struct regulator_desc tps65090_regulator_desc[] = { - tps65090_REG_DESC(DCDC1, "vsys1", 0x0C, tps65090_reg_contol_ops), - tps65090_REG_DESC(DCDC2, "vsys2", 0x0D, tps65090_reg_contol_ops), - tps65090_REG_DESC(DCDC3, "vsys3", 0x0E, tps65090_reg_contol_ops), - tps65090_REG_DESC(FET1, "infet1", 0x0F, tps65090_reg_contol_ops), - tps65090_REG_DESC(FET2, "infet2", 0x10, tps65090_reg_contol_ops), - tps65090_REG_DESC(FET3, "infet3", 0x11, tps65090_reg_contol_ops), - tps65090_REG_DESC(FET4, "infet4", 0x12, tps65090_reg_contol_ops), - tps65090_REG_DESC(FET5, "infet5", 0x13, tps65090_reg_contol_ops), - tps65090_REG_DESC(FET6, "infet6", 0x14, tps65090_reg_contol_ops), - tps65090_REG_DESC(FET7, "infet7", 0x15, tps65090_reg_contol_ops), - tps65090_REG_DESC(LDO1, "vsys-l1", 0, tps65090_ldo_ops), - tps65090_REG_DESC(LDO2, "vsys-l2", 0, tps65090_ldo_ops), + tps65090_REG_DESC(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT), + tps65090_reg_control_ops), + tps65090_REG_DESC(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT), + tps65090_reg_control_ops), + tps65090_REG_DESC(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT), + tps65090_reg_control_ops), + + tps65090_REG_DESC(FET1, "infet1", 0x0F, + BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), + tps65090_fet_control_ops), + tps65090_REG_DESC(FET2, "infet2", 0x10, + BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), + tps65090_fet_control_ops), + tps65090_REG_DESC(FET3, "infet3", 0x11, + BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), + tps65090_fet_control_ops), + tps65090_REG_DESC(FET4, "infet4", 0x12, + BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), + tps65090_fet_control_ops), + tps65090_REG_DESC(FET5, "infet5", 0x13, + BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), + tps65090_fet_control_ops), + tps65090_REG_DESC(FET6, "infet6", 0x14, + BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), + tps65090_fet_control_ops), + tps65090_REG_DESC(FET7, "infet7", 0x15, + BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), + tps65090_fet_control_ops), + + tps65090_REG_DESC(LDO1, "vsys-l1", 0, 0, + tps65090_ldo_ops), + tps65090_REG_DESC(LDO2, "vsys-l2", 0, 0, + tps65090_ldo_ops), }; static inline bool is_dcdc(int id) @@ -209,6 +377,11 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data( rpdata->gpio = of_get_named_gpio(np, "dcdc-ext-control-gpios", 0); + if (of_property_read_u32(tps65090_matches[idx].of_node, + "ti,overcurrent-wait", + &rpdata->overcurrent_wait) == 0) + rpdata->overcurrent_wait_valid = true; + tps65090_pdata->reg_pdata[idx] = rpdata; } return tps65090_pdata; @@ -258,6 +431,11 @@ static int tps65090_regulator_probe(struct platform_device *pdev) ri = &pmic[num]; ri->dev = &pdev->dev; ri->desc = &tps65090_regulator_desc[num]; + if (tps_pdata) { + ri->overcurrent_wait_valid = + tps_pdata->overcurrent_wait_valid; + ri->overcurrent_wait = tps_pdata->overcurrent_wait; + } /* * TPS5090 DCDC support the control from external digital input. @@ -299,6 +477,12 @@ static int tps65090_regulator_probe(struct platform_device *pdev) } ri->rdev = rdev; + if (ri->overcurrent_wait_valid) { + ret = tps65090_reg_set_overcurrent_wait(ri, rdev); + if (ret < 0) + return ret; + } + /* Enable external control if it is require */ if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data && tps_pdata->enable_ext_control) { diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index 10b78d2b766a..f7ed20a5a8b9 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -134,6 +134,7 @@ static struct regulator_ops tps65217_pmic_ldo1_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = tps65217_pmic_set_voltage_sel, .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, }; static const struct regulator_desc regulators[] = { @@ -257,9 +258,6 @@ static int tps65217_regulator_probe(struct platform_device *pdev) pdev->name); return PTR_ERR(rdev); } - - /* Save regulator for cleanup */ - tps->rdev[i] = rdev; } return 0; } diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index cec72fa71d1d..69b4b7750410 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -27,12 +27,10 @@ #include #include -static unsigned int tps65218_ramp_delay = 4000; - enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4, DCDC5, DCDC6, LDO1 }; #define TPS65218_REGULATOR(_name, _id, _ops, _n, _vr, _vm, _er, _em, _t, \ - _lr, _nlr) \ + _lr, _nlr, _delay) \ { \ .name = _name, \ .id = _id, \ @@ -47,6 +45,7 @@ enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4, DCDC5, DCDC6, LDO1 }; .volt_table = _t, \ .linear_ranges = _lr, \ .n_linear_ranges = _nlr, \ + .ramp_delay = _delay, \ } \ #define TPS65218_INFO(_id, _nm, _min, _max) \ @@ -152,22 +151,6 @@ static int tps65218_pmic_disable(struct regulator_dev *dev) dev->desc->enable_mask, TPS65218_PROTECT_L1); } -static int tps65218_set_voltage_time_sel(struct regulator_dev *rdev, - unsigned int old_selector, unsigned int new_selector) -{ - int old_uv, new_uv; - - old_uv = regulator_list_voltage_linear_range(rdev, old_selector); - if (old_uv < 0) - return old_uv; - - new_uv = regulator_list_voltage_linear_range(rdev, new_selector); - if (new_uv < 0) - return new_uv; - - return DIV_ROUND_UP(abs(old_uv - new_uv), tps65218_ramp_delay); -} - /* Operations permitted on DCDC1, DCDC2 */ static struct regulator_ops tps65218_dcdc12_ops = { .is_enabled = regulator_is_enabled_regmap, @@ -177,7 +160,7 @@ static struct regulator_ops tps65218_dcdc12_ops = { .set_voltage_sel = tps65218_pmic_set_voltage_sel, .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, - .set_voltage_time_sel = tps65218_set_voltage_time_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, }; /* Operations permitted on DCDC3, DCDC4 and LDO1 */ @@ -203,33 +186,33 @@ static const struct regulator_desc regulators[] = { TPS65218_REG_CONTROL_DCDC1, TPS65218_CONTROL_DCDC1_MASK, TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC1_EN, NULL, - dcdc1_dcdc2_ranges, 2), + dcdc1_dcdc2_ranges, 2, 4000), TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC2, TPS65218_CONTROL_DCDC2_MASK, TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC2_EN, NULL, - dcdc1_dcdc2_ranges, 2), + dcdc1_dcdc2_ranges, 2, 4000), TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, tps65218_ldo1_dcdc34_ops, 64, TPS65218_REG_CONTROL_DCDC3, TPS65218_CONTROL_DCDC3_MASK, TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC3_EN, NULL, - ldo1_dcdc3_ranges, 2), + ldo1_dcdc3_ranges, 2, 0), TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, tps65218_ldo1_dcdc34_ops, 53, TPS65218_REG_CONTROL_DCDC4, TPS65218_CONTROL_DCDC4_MASK, TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC4_EN, NULL, - dcdc4_ranges, 2), + dcdc4_ranges, 2, 0), TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, tps65218_dcdc56_pmic_ops, 1, -1, -1, TPS65218_REG_ENABLE1, - TPS65218_ENABLE1_DC5_EN, NULL, NULL, 0), + TPS65218_ENABLE1_DC5_EN, NULL, NULL, 0, 0), TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, tps65218_dcdc56_pmic_ops, 1, -1, -1, TPS65218_REG_ENABLE1, - TPS65218_ENABLE1_DC6_EN, NULL, NULL, 0), + TPS65218_ENABLE1_DC6_EN, NULL, NULL, 0, 0), TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, tps65218_ldo1_dcdc34_ops, 64, TPS65218_REG_CONTROL_DCDC4, TPS65218_CONTROL_LDO1_MASK, TPS65218_REG_ENABLE2, TPS65218_ENABLE2_LDO1_EN, NULL, ldo1_dcdc3_ranges, - 2), + 2, 0), }; static int tps65218_regulator_probe(struct platform_device *pdev) diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index 32f38a63d944..0a3bb3aecd97 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -63,12 +63,7 @@ struct tps6586x_regulator { int enable_reg[2]; }; -static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev) -{ - return rdev_get_dev(rdev)->parent; -} - -static struct regulator_ops tps6586x_regulator_ops = { +static struct regulator_ops tps6586x_rw_regulator_ops = { .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_ascend, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -79,6 +74,16 @@ static struct regulator_ops tps6586x_regulator_ops = { .disable = regulator_disable_regmap, }; +static struct regulator_ops tps6586x_ro_regulator_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, +}; + static struct regulator_ops tps6586x_sys_regulator_ops = { }; @@ -106,6 +111,13 @@ static const unsigned int tps6586x_sm2_voltages[] = { 4200000, 4250000, 4300000, 4350000, 4400000, 4450000, 4500000, 4550000, }; +static int tps658640_sm2_voltages[] = { + 2150000, 2200000, 2250000, 2300000, 2350000, 2400000, 2450000, 2500000, + 2550000, 2600000, 2650000, 2700000, 2750000, 2800000, 2850000, 2900000, + 2950000, 3000000, 3050000, 3100000, 3150000, 3200000, 3250000, 3300000, + 3350000, 3400000, 3450000, 3500000, 3550000, 3600000, 3650000, 3700000, +}; + static const unsigned int tps658643_sm2_voltages[] = { 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000, @@ -120,12 +132,16 @@ static const unsigned int tps6586x_dvm_voltages[] = { 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, }; -#define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \ +static int tps658640_rtc_voltages[] = { + 2500000, 2850000, 3100000, 3300000, +}; + +#define TPS6586X_REGULATOR(_id, _ops, _pin_name, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ .desc = { \ .supply_name = _pin_name, \ .name = "REG-" #_id, \ - .ops = &tps6586x_regulator_ops, \ + .ops = &tps6586x_## _ops ## _regulator_ops, \ .type = REGULATOR_VOLTAGE, \ .id = TPS6586X_ID_##_id, \ .n_voltages = ARRAY_SIZE(vdata##_voltages), \ @@ -146,14 +162,21 @@ static const unsigned int tps6586x_dvm_voltages[] = { #define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1) \ { \ - TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \ + TPS6586X_REGULATOR(_id, rw, _pname, vdata, vreg, shift, nbits, \ + ereg0, ebit0, ereg1, ebit1, 0, 0) \ +} + +#define TPS6586X_FIXED_LDO(_id, _pname, vdata, vreg, shift, nbits, \ + ereg0, ebit0, ereg1, ebit1) \ +{ \ + TPS6586X_REGULATOR(_id, ro, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1, 0, 0) \ } #define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ { \ - TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \ + TPS6586X_REGULATOR(_id, rw, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ } @@ -207,6 +230,26 @@ static struct tps6586x_regulator tps658623_regulator[] = { END, 7), }; +static struct tps6586x_regulator tps658640_regulator[] = { + TPS6586X_LDO(LDO_3, "vinldo23", tps6586x_ldo0, SUPPLYV4, 0, 3, + ENC, 2, END, 2), + TPS6586X_LDO(LDO_5, "REG-SYS", tps6586x_ldo0, SUPPLYV6, 0, 3, + ENE, 6, ENE, 6), + TPS6586X_LDO(LDO_6, "vinldo678", tps6586x_ldo0, SUPPLYV3, 0, 3, + ENC, 4, END, 4), + TPS6586X_LDO(LDO_7, "vinldo678", tps6586x_ldo0, SUPPLYV3, 3, 3, + ENC, 5, END, 5), + TPS6586X_LDO(LDO_8, "vinldo678", tps6586x_ldo0, SUPPLYV2, 5, 3, + ENC, 6, END, 6), + TPS6586X_LDO(LDO_9, "vinldo9", tps6586x_ldo0, SUPPLYV6, 3, 3, + ENE, 7, ENE, 7), + TPS6586X_LDO(SM_2, "vin-sm2", tps658640_sm2, SUPPLYV2, 0, 5, + ENC, 7, END, 7), + + TPS6586X_FIXED_LDO(LDO_RTC, "REG-SYS", tps658640_rtc, SUPPLYV4, 3, 2, + V4, 7, V4, 7), +}; + static struct tps6586x_regulator tps658643_regulator[] = { TPS6586X_LDO(SM_2, "vin-sm2", tps658643_sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), @@ -295,6 +338,11 @@ static struct tps6586x_regulator *find_regulator_info(int id, int version) table = tps658623_regulator; num = ARRAY_SIZE(tps658623_regulator); break; + case TPS658640: + case TPS658640v2: + table = tps658640_regulator; + num = ARRAY_SIZE(tps658640_regulator); + break; case TPS658643: table = tps658643_regulator; num = ARRAY_SIZE(tps658643_regulator); diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c index 2863428813e4..02e7267ccf92 100644 --- a/drivers/regulator/vexpress.c +++ b/drivers/regulator/vexpress.c @@ -98,7 +98,7 @@ static int vexpress_regulator_probe(struct platform_device *pdev) return 0; } -static struct of_device_id vexpress_regulator_of_match[] = { +static const struct of_device_id vexpress_regulator_of_match[] = { { .compatible = "arm,vexpress-volt", }, { } }; diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index 5cf8b91ce996..6d9371f88875 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -124,4 +124,7 @@ int wm5102_patch(struct arizona *arizona); int wm5110_patch(struct arizona *arizona); int wm8997_patch(struct arizona *arizona); +extern int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop, + bool mandatory); + #endif diff --git a/include/linux/mfd/bcm590xx.h b/include/linux/mfd/bcm590xx.h index 434df2d4e587..267aedee1c7a 100644 --- a/include/linux/mfd/bcm590xx.h +++ b/include/linux/mfd/bcm590xx.h @@ -19,12 +19,15 @@ #include /* max register address */ -#define BCM590XX_MAX_REGISTER 0xe7 +#define BCM590XX_MAX_REGISTER_PRI 0xe7 +#define BCM590XX_MAX_REGISTER_SEC 0xf0 struct bcm590xx { struct device *dev; - struct i2c_client *i2c_client; - struct regmap *regmap; + struct i2c_client *i2c_pri; + struct i2c_client *i2c_sec; + struct regmap *regmap_pri; + struct regmap *regmap_sec; unsigned int id; }; diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index bdba8c61207b..f543de91ce19 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -63,7 +63,7 @@ struct mfd_cell { /* A list of regulator supplies that should be mapped to the MFD * device rather than the child device when requested */ - const char **parent_supplies; + const char * const *parent_supplies; int num_parent_supplies; }; diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h index 4b449b8ac548..900cd7a04314 100644 --- a/include/linux/mfd/samsung/s2mps14.h +++ b/include/linux/mfd/samsung/s2mps14.h @@ -148,6 +148,8 @@ enum s2mps14_regulators { #define S2MPS14_ENABLE_SHIFT 6 /* On/Off controlled by PWREN */ #define S2MPS14_ENABLE_SUSPEND (0x01 << S2MPS14_ENABLE_SHIFT) +/* On/Off controlled by LDO10EN or EMMCEN */ +#define S2MPS14_ENABLE_EXT_CONTROL (0x00 << S2MPS14_ENABLE_SHIFT) #define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1) #define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1) diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 3f43069413e7..0bf2708df150 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -64,6 +64,20 @@ enum { TPS65090_REGULATOR_MAX, }; +/* Register addresses */ +#define TPS65090_REG_INTR_STS 0x00 +#define TPS65090_REG_INTR_STS2 0x01 +#define TPS65090_REG_INTR_MASK 0x02 +#define TPS65090_REG_INTR_MASK2 0x03 +#define TPS65090_REG_CG_CTRL0 0x04 +#define TPS65090_REG_CG_CTRL1 0x05 +#define TPS65090_REG_CG_CTRL2 0x06 +#define TPS65090_REG_CG_CTRL3 0x07 +#define TPS65090_REG_CG_CTRL4 0x08 +#define TPS65090_REG_CG_CTRL5 0x09 +#define TPS65090_REG_CG_STATUS1 0x0a +#define TPS65090_REG_CG_STATUS2 0x0b + struct tps65090 { struct device *dev; struct regmap *rmap; @@ -78,11 +92,16 @@ struct tps65090 { * DCDC1, DCDC2 and DCDC3. * @gpio: Gpio number if external control is enabled and controlled through * gpio. + * @overcurrent_wait_valid: True if the overcurrent_wait should be applied. + * @overcurrent_wait: Value to set as the overcurrent wait time. This is the + * actual bitfield value, not a time in ms (valid value are 0 - 3). */ struct tps65090_regulator_plat_data { struct regulator_init_data *reg_init_data; bool enable_ext_control; int gpio; + bool overcurrent_wait_valid; + int overcurrent_wait; }; struct tps65090_platform_data { diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index 54b5458ec084..95d6938737fd 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -254,7 +254,6 @@ struct tps65217 { struct tps65217_board *pdata; unsigned long id; struct regulator_desc desc[TPS65217_NUM_REGULATOR]; - struct regulator_dev *rdev[TPS65217_NUM_REGULATOR]; struct regmap *regmap; }; diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index cbecec2e353a..96187ed9f9bb 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -17,6 +17,8 @@ #define TPS658621A 0x15 #define TPS658621CD 0x2c #define TPS658623 0x1b +#define TPS658640 0x01 +#define TPS658640v2 0x02 #define TPS658643 0x03 enum { diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 1a4a8c157b31..a2d9d81038d1 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -151,11 +151,13 @@ int regulator_register_supply_alias(struct device *dev, const char *id, const char *alias_id); void regulator_unregister_supply_alias(struct device *dev, const char *id); -int regulator_bulk_register_supply_alias(struct device *dev, const char **id, +int regulator_bulk_register_supply_alias(struct device *dev, + const char *const *id, struct device *alias_dev, - const char **alias_id, int num_id); + const char *const *alias_id, + int num_id); void regulator_bulk_unregister_supply_alias(struct device *dev, - const char **id, int num_id); + const char * const *id, int num_id); int devm_regulator_register_supply_alias(struct device *dev, const char *id, struct device *alias_dev, @@ -164,12 +166,12 @@ void devm_regulator_unregister_supply_alias(struct device *dev, const char *id); int devm_regulator_bulk_register_supply_alias(struct device *dev, - const char **id, + const char *const *id, struct device *alias_dev, - const char **alias_id, + const char *const *alias_id, int num_id); void devm_regulator_bulk_unregister_supply_alias(struct device *dev, - const char **id, + const char *const *id, int num_id); /* regulator output control and status */ @@ -290,17 +292,17 @@ static inline void regulator_unregister_supply_alias(struct device *dev, } static inline int regulator_bulk_register_supply_alias(struct device *dev, - const char **id, - struct device *alias_dev, - const char **alias_id, - int num_id) + const char *const *id, + struct device *alias_dev, + const char * const *alias_id, + int num_id) { return 0; } static inline void regulator_bulk_unregister_supply_alias(struct device *dev, - const char **id, - int num_id) + const char * const *id, + int num_id) { } @@ -317,15 +319,17 @@ static inline void devm_regulator_unregister_supply_alias(struct device *dev, { } -static inline int devm_regulator_bulk_register_supply_alias( - struct device *dev, const char **id, struct device *alias_dev, - const char **alias_id, int num_id) +static inline int devm_regulator_bulk_register_supply_alias(struct device *dev, + const char *const *id, + struct device *alias_dev, + const char *const *alias_id, + int num_id) { return 0; } static inline void devm_regulator_bulk_unregister_supply_alias( - struct device *dev, const char **id, int num_id) + struct device *dev, const char *const *id, int num_id) { } @@ -397,6 +401,12 @@ static inline int regulator_set_voltage(struct regulator *regulator, return 0; } +static inline int regulator_set_voltage_time(struct regulator *regulator, + int old_uV, int new_uV) +{ + return 0; +} + static inline int regulator_get_voltage(struct regulator *regulator) { return -EINVAL;