spi: sun4i: Add YAML schemas

Switch the DT binding to a YAML schema to enable the DT validation.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/allwinner,sun4i-a10-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 SPI Controller Device Tree Bindings
+
+allOf:
+  - $ref: "spi-controller.yaml"
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    const: allwinner,sun4i-a10-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  num-cs: true
+
+patternProperties:
+  "^.*@[0-9a-f]+":
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 4
+
+      spi-rx-bus-width:
+        const: 1
+
+      spi-tx-bus-width:
+        const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi1: spi@1c06000 {
+        compatible = "allwinner,sun4i-a10-spi";
+        reg = <0x01c06000 0x1000>;
+        interrupts = <11>;
+        clocks = <&ahb_gates 21>, <&spi1_clk>;
+        clock-names = "ahb", "mod";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
+...

Documentation/devicetree/bindings/spi/spi-sun4i.txt

@@ -1,23 +0,0 @@
-Allwinner A10 SPI controller
-
-Required properties:
-- compatible: Should be "allwinner,sun4-a10-spi".
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks: phandle to the clocks feeding the SPI controller. Two are
-          needed:
-  - "ahb": the gated AHB parent clock
-  - "mod": the parent module clock
-- clock-names: Must contain the clock names described just above
-
-Example:
-
-spi1: spi@1c06000 {
-	compatible = "allwinner,sun4i-a10-spi";
-	reg = <0x01c06000 0x1000>;
-	interrupts = <11>;
-	clocks = <&ahb_gates 21>, <&spi1_clk>;
-	clock-names = "ahb", "mod";
-	#address-cells = <1>;
-	#size-cells = <0>;
-};