ARM: S3C24XX: Remove unused GPIO definitions for port J

There is no need now for individual GPIO port J pin control bit
definitions, the GPIO0..12 pins can be configured using the gpiolib
API. The GPJ* register address offset definitions for S3C2413 are
moved to the common mach-s3c24xx/include/mach/regs-gpio.h header.
These are still used outside of the gpio-samsung driver by PM code.

Switching GPJ port to camera function can be done for example with:
s3c_gpio_cfgall_range(S3C2410_GPJ(0), 13, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);

Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Sylwester Nawrocki 2012-07-13 18:05:29 +09:00 committed by Kukjin Kim
parent b5fe5d7d9d
commit 353ba37a09
7 changed files with 15 additions and 77 deletions

View File

@ -302,7 +302,7 @@
/* S3C2410:
* Port G consists of 8 GPIO/IRQ/Special function
*
* GPGCON has 2 bits for each of the input pins on port F
* GPGCON has 2 bits for each of the input pins on port G
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
@ -366,7 +366,7 @@
/* Port H consists of11 GPIO/serial/Misc pins
*
* GPGCON has 2 bits for each of the input pins on port F
* GPHCON has 2 bits for each of the input pins on port H
* 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
*
* pull up works like all other ports.
@ -427,6 +427,19 @@
* for the 2412/2413 from the 2410/2440/2442
*/
/*
* Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
* for each of the pins on port J.
* 00 - input, 01 output, 10 - camera
*
* Pull up works like all other ports.
*/
#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
/* S3C2443 and above */
#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0)
#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4)

View File

@ -1,70 +0,0 @@
/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
*
* Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C2440 GPIO J register definitions
*/
#ifndef __ASM_ARCH_REGS_GPIOJ_H
#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
/* Port J consists of 13 GPIO/Camera pins
*
* GPJCON has 2 bits for each of the input pins on port F
* 00 = 0 input, 1 output, 2 Camera
*
* pull up works like all other ports.
*/
#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
#define S3C2440_GPJ0_OUTP (0x01 << 0)
#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
#define S3C2440_GPJ1_OUTP (0x01 << 2)
#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
#define S3C2440_GPJ2_OUTP (0x01 << 4)
#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
#define S3C2440_GPJ3_OUTP (0x01 << 6)
#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
#define S3C2440_GPJ4_OUTP (0x01 << 8)
#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
#define S3C2440_GPJ5_OUTP (0x01 << 10)
#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
#define S3C2440_GPJ6_OUTP (0x01 << 12)
#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
#define S3C2440_GPJ7_OUTP (0x01 << 14)
#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
#define S3C2440_GPJ8_OUTP (0x01 << 16)
#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
#define S3C2440_GPJ9_OUTP (0x01 << 18)
#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
#define S3C2440_GPJ10_OUTP (0x01 << 20)
#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
#define S3C2440_GPJ11_OUTP (0x01 << 22)
#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
#define S3C2440_GPJ12_OUTP (0x01 << 24)
#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
#endif /* __ASM_ARCH_REGS_GPIOJ_H */

View File

@ -71,7 +71,6 @@
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/fb.h>
#include <plat/usb-control.h>

View File

@ -42,7 +42,6 @@
#include <asm/mach-types.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <mach/fb.h>

View File

@ -26,7 +26,6 @@
#include <asm/irq.h>
#include <mach/regs-power.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-gpio.h>
#include <mach/regs-dsc.h>

View File

@ -39,7 +39,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>

View File

@ -36,7 +36,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>