diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index a511ef3614b9..3fda750db2a9 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3312,7 +3312,7 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	}
 
 	/* fw uses seconds, also make sure that it's >0 */
-	interval = max_t(u16, 1, request->interval / 1000);
+	interval = max_t(u16, 1, request->scan_plans[0].interval);
 
 	ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx,
 				  interval, interval,
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 064c100e45fe..f0728b784edb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -629,6 +629,7 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
 	kfree(mvm->d3_resume_sram);
 	if (mvm->nd_config) {
 		kfree(mvm->nd_config->match_sets);
+		kfree(mvm->nd_config->scan_plans);
 		kfree(mvm->nd_config);
 		mvm->nd_config = NULL;
 	}
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 4a1f9af63bf0..cee4f267ca66 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -1271,12 +1271,12 @@ int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm,
 
 	params.type = iwl_mvm_get_scan_type(mvm, vif, &params);
 
-	if (req->interval > U16_MAX) {
+	if (req->scan_plans[0].interval > U16_MAX) {
 		IWL_DEBUG_SCAN(mvm,
 			       "interval value is > 16-bits, set to max possible\n");
 		params.interval = U16_MAX;
 	} else {
-		params.interval = req->interval / MSEC_PER_SEC;
+		params.interval = req->scan_plans[0].interval;
 	}
 
 	/* In theory, LMAC scans can handle a 32-bit delay, but since
diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c
index 7c355fff2c5e..ebed13af9852 100644
--- a/drivers/net/wireless/ti/wl12xx/scan.c
+++ b/drivers/net/wireless/ti/wl12xx/scan.c
@@ -350,7 +350,8 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 	cfg->bss_type = SCAN_BSS_TYPE_ANY;
 	/* currently NL80211 supports only a single interval */
 	for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
-		cfg->intervals[i] = cpu_to_le32(req->interval);
+		cfg->intervals[i] = cpu_to_le32(req->scan_plans[0].interval *
+						MSEC_PER_SEC);
 
 	cfg->ssid_len = 0;
 	ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req);
diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c
index c938c494c785..bc15aa2c3efa 100644
--- a/drivers/net/wireless/ti/wl18xx/scan.c
+++ b/drivers/net/wireless/ti/wl18xx/scan.c
@@ -228,13 +228,15 @@ int wl18xx_scan_sched_scan_config(struct wl1271 *wl,
 	wl18xx_adjust_channels(cmd, cmd_channels);
 
 	if (c->num_short_intervals && c->long_interval &&
-	    c->long_interval > req->interval) {
-		cmd->short_cycles_msec = cpu_to_le16(req->interval);
+	    c->long_interval > req->scan_plans[0].interval * MSEC_PER_SEC) {
+		cmd->short_cycles_msec =
+			cpu_to_le16(req->scan_plans[0].interval * MSEC_PER_SEC);
 		cmd->long_cycles_msec = cpu_to_le16(c->long_interval);
 		cmd->short_cycles_count = c->num_short_intervals;
 	} else {
 		cmd->short_cycles_msec = 0;
-		cmd->long_cycles_msec = cpu_to_le16(req->interval);
+		cmd->long_cycles_msec =
+			cpu_to_le16(req->scan_plans[0].interval * MSEC_PER_SEC);
 		cmd->short_cycles_count = 0;
 	}
 	wl1271_debug(DEBUG_SCAN, "short_interval: %d, long_interval: %d, num_short: %d",
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7f1e9ee844e2..48155be5db7f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5,6 +5,7 @@
  *
  * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014 Intel Mobile Communications GmbH
+ * Copyright 2015	Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -1500,6 +1501,20 @@ struct cfg80211_match_set {
 	s32 rssi_thold;
 };
 
+/**
+ * struct cfg80211_sched_scan_plan - scan plan for scheduled scan
+ *
+ * @interval: interval between scheduled scan iterations. In seconds.
+ * @iterations: number of scan iterations in this scan plan. Zero means
+ *	infinite loop.
+ *	The last scan plan will always have this parameter set to zero,
+ *	all other scan plans will have a finite number of iterations.
+ */
+struct cfg80211_sched_scan_plan {
+	u32 interval;
+	u32 iterations;
+};
+
 /**
  * struct cfg80211_sched_scan_request - scheduled scan request description
  *
@@ -1507,7 +1522,6 @@ struct cfg80211_match_set {
  * @n_ssids: number of SSIDs
  * @n_channels: total number of channels to scan
  * @scan_width: channel width for scanning
- * @interval: interval between each scheduled scan cycle
  * @ie: optional information element(s) to add into Probe Request or %NULL
  * @ie_len: length of ie in octets
  * @flags: bit field of flags controlling operation
@@ -1526,6 +1540,9 @@ struct cfg80211_match_set {
  * @mac_addr_mask: MAC address mask used with randomisation, bits that
  *	are 0 in the mask should be randomised, bits that are 1 should
  *	be taken from the @mac_addr
+ * @scan_plans: scan plans to be executed in this scheduled scan. Lowest
+ *	index must be executed first.
+ * @n_scan_plans: number of scan plans, at least 1.
  * @rcu_head: RCU callback used to free the struct
  * @owner_nlportid: netlink portid of owner (if this should is a request
  *	owned by a particular socket)
@@ -1539,7 +1556,6 @@ struct cfg80211_sched_scan_request {
 	int n_ssids;
 	u32 n_channels;
 	enum nl80211_bss_scan_width scan_width;
-	u32 interval;
 	const u8 *ie;
 	size_t ie_len;
 	u32 flags;
@@ -1547,6 +1563,8 @@ struct cfg80211_sched_scan_request {
 	int n_match_sets;
 	s32 min_rssi_thold;
 	u32 delay;
+	struct cfg80211_sched_scan_plan *scan_plans;
+	int n_scan_plans;
 
 	u8 mac_addr[ETH_ALEN] __aligned(2);
 	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
@@ -3076,6 +3094,12 @@ struct wiphy_vendor_command {
  *	include fixed IEs like supported rates
  * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled
  *	scans
+ * @max_sched_scan_plans: maximum number of scan plans (scan interval and number
+ *	of iterations) for scheduled scan supported by the device.
+ * @max_sched_scan_plan_interval: maximum interval (in seconds) for a
+ *	single scan plan supported by the device.
+ * @max_sched_scan_plan_iterations: maximum number of iterations for a single
+ *	scan plan supported by the device.
  * @coverage_class: current coverage class
  * @fw_version: firmware version for ethtool reporting
  * @hw_version: hardware version for ethtool reporting
@@ -3183,6 +3207,9 @@ struct wiphy {
 	u8 max_match_sets;
 	u16 max_scan_ie_len;
 	u16 max_sched_scan_ie_len;
+	u32 max_sched_scan_plans;
+	u32 max_sched_scan_plan_interval;
+	u32 max_sched_scan_plan_iterations;
 
 	int n_cipher_suites;
 	const u32 *cipher_suites;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 5dadb844fe18..1f0b4cf5dd03 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -10,6 +10,7 @@
  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015	Intel Deutschland GmbH
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -328,7 +329,15 @@
  *	partial scan results may be available
  *
  * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	intervals and certain number of cycles, as specified by
+ *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
+ *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
+ *	scheduled scan will run in an infinite loop with the specified interval.
+ *	These attributes are mutually exculsive,
+ *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
+ *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
+ *	If for some reason scheduled scan is aborted by the driver, all scan
+ *	plans are canceled (including scan plans that did not start yet).
  *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
  *	are passed, they are used in the probe requests.  For
  *	broadcast, a broadcast SSID must be passed (ie. an empty
@@ -1761,6 +1770,19 @@ enum nl80211_commands {
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
+ *	scheduled scan supported by the device (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
+ *	Each scan plan defines the number of scan iterations and the interval
+ *	between scans. The last scan plan will always run infinitely,
+ *	thus it must not specify the number of iterations, only the interval
+ *	between scans. The scan plans are executed sequentially.
+ *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2130,6 +2152,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_REG_INDOOR,
 
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+	NL80211_ATTR_SCHED_SCAN_PLANS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -4593,4 +4620,28 @@ enum nl80211_tdls_peer_capability {
 	NL80211_TDLS_PEER_WMM = 1<<2,
 };
 
+/**
+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
+ *	seconds (u32).
+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
+ *	scan plan (u32). The last scan plan must not specify this attribute
+ *	because it will run infinitely. A value of zero is invalid as it will
+ *	make the scan plan meaningless.
+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
+ *	currently defined
+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_plan {
+	__NL80211_SCHED_SCAN_PLAN_INVALID,
+	NL80211_SCHED_SCAN_PLAN_INTERVAL,
+	NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
+	NL80211_SCHED_SCAN_PLAN_MAX =
+		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/net/wireless/core.c b/net/wireless/core.c
index f223026ddb03..a83037da21b6 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -461,6 +461,9 @@ use_default_name:
 
 	rdev->wiphy.max_num_csa_counters = 1;
 
+	rdev->wiphy.max_sched_scan_plans = 1;
+	rdev->wiphy.max_sched_scan_plan_interval = U32_MAX;
+
 	return &rdev->wiphy;
 }
 EXPORT_SYMBOL(wiphy_new_nm);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fb0712b3d9cb..28c29e7da749 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -479,6 +479,12 @@ nl80211_match_policy[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1] = {
 	[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI] = { .type = NLA_U32 },
 };
 
+static const struct nla_policy
+nl80211_plan_policy[NL80211_SCHED_SCAN_PLAN_MAX + 1] = {
+	[NL80211_SCHED_SCAN_PLAN_INTERVAL] = { .type = NLA_U32 },
+	[NL80211_SCHED_SCAN_PLAN_ITERATIONS] = { .type = NLA_U32 },
+};
+
 static int nl80211_prepare_wdev_dump(struct sk_buff *skb,
 				     struct netlink_callback *cb,
 				     struct cfg80211_registered_device **rdev,
@@ -1304,7 +1310,13 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		    nla_put_u16(msg, NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
 				rdev->wiphy.max_sched_scan_ie_len) ||
 		    nla_put_u8(msg, NL80211_ATTR_MAX_MATCH_SETS,
-			       rdev->wiphy.max_match_sets))
+			       rdev->wiphy.max_match_sets) ||
+		    nla_put_u32(msg, NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+				rdev->wiphy.max_sched_scan_plans) ||
+		    nla_put_u32(msg, NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+				rdev->wiphy.max_sched_scan_plan_interval) ||
+		    nla_put_u32(msg, NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+				rdev->wiphy.max_sched_scan_plan_iterations))
 			goto nla_put_failure;
 
 		if ((rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN) &&
@@ -5974,14 +5986,100 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	return err;
 }
 
+static int
+nl80211_parse_sched_scan_plans(struct wiphy *wiphy, int n_plans,
+			       struct cfg80211_sched_scan_request *request,
+			       struct nlattr **attrs)
+{
+	int tmp, err, i = 0;
+	struct nlattr *attr;
+
+	if (!attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
+		u32 interval;
+
+		/*
+		 * If scan plans are not specified,
+		 * %NL80211_ATTR_SCHED_SCAN_INTERVAL must be specified. In this
+		 * case one scan plan will be set with the specified scan
+		 * interval and infinite number of iterations.
+		 */
+		if (!attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+			return -EINVAL;
+
+		interval = nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
+		if (!interval)
+			return -EINVAL;
+
+		request->scan_plans[0].interval =
+			DIV_ROUND_UP(interval, MSEC_PER_SEC);
+		if (!request->scan_plans[0].interval)
+			return -EINVAL;
+
+		if (request->scan_plans[0].interval >
+		    wiphy->max_sched_scan_plan_interval)
+			request->scan_plans[0].interval =
+				wiphy->max_sched_scan_plan_interval;
+
+		return 0;
+	}
+
+	nla_for_each_nested(attr, attrs[NL80211_ATTR_SCHED_SCAN_PLANS], tmp) {
+		struct nlattr *plan[NL80211_SCHED_SCAN_PLAN_MAX + 1];
+
+		if (WARN_ON(i >= n_plans))
+			return -EINVAL;
+
+		err = nla_parse(plan, NL80211_SCHED_SCAN_PLAN_MAX,
+				nla_data(attr), nla_len(attr),
+				nl80211_plan_policy);
+		if (err)
+			return err;
+
+		if (!plan[NL80211_SCHED_SCAN_PLAN_INTERVAL])
+			return -EINVAL;
+
+		request->scan_plans[i].interval =
+			nla_get_u32(plan[NL80211_SCHED_SCAN_PLAN_INTERVAL]);
+		if (!request->scan_plans[i].interval ||
+		    request->scan_plans[i].interval >
+		    wiphy->max_sched_scan_plan_interval)
+			return -EINVAL;
+
+		if (plan[NL80211_SCHED_SCAN_PLAN_ITERATIONS]) {
+			request->scan_plans[i].iterations =
+				nla_get_u32(plan[NL80211_SCHED_SCAN_PLAN_ITERATIONS]);
+			if (!request->scan_plans[i].iterations ||
+			    (request->scan_plans[i].iterations >
+			     wiphy->max_sched_scan_plan_iterations))
+				return -EINVAL;
+		} else if (i < n_plans - 1) {
+			/*
+			 * All scan plans but the last one must specify
+			 * a finite number of iterations
+			 */
+			return -EINVAL;
+		}
+
+		i++;
+	}
+
+	/*
+	 * The last scan plan must not specify the number of
+	 * iterations, it is supposed to run infinitely
+	 */
+	if (request->scan_plans[n_plans - 1].iterations)
+		return  -EINVAL;
+
+	return 0;
+}
+
 static struct cfg80211_sched_scan_request *
 nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 			 struct nlattr **attrs)
 {
 	struct cfg80211_sched_scan_request *request;
 	struct nlattr *attr;
-	int err, tmp, n_ssids = 0, n_match_sets = 0, n_channels, i;
-	u32 interval;
+	int err, tmp, n_ssids = 0, n_match_sets = 0, n_channels, i, n_plans = 0;
 	enum ieee80211_band band;
 	size_t ie_len;
 	struct nlattr *tb[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1];
@@ -5990,13 +6088,6 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 	if (!is_valid_ie_attr(attrs[NL80211_ATTR_IE]))
 		return ERR_PTR(-EINVAL);
 
-	if (!attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
-		return ERR_PTR(-EINVAL);
-
-	interval = nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
-	if (interval == 0)
-		return ERR_PTR(-EINVAL);
-
 	if (attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
 		n_channels = validate_scan_freqs(
 				attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
@@ -6060,9 +6151,37 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 	if (ie_len > wiphy->max_sched_scan_ie_len)
 		return ERR_PTR(-EINVAL);
 
+	if (attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
+		/*
+		 * NL80211_ATTR_SCHED_SCAN_INTERVAL must not be specified since
+		 * each scan plan already specifies its own interval
+		 */
+		if (attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+			return ERR_PTR(-EINVAL);
+
+		nla_for_each_nested(attr,
+				    attrs[NL80211_ATTR_SCHED_SCAN_PLANS], tmp)
+			n_plans++;
+	} else {
+		/*
+		 * The scan interval attribute is kept for backward
+		 * compatibility. If no scan plans are specified and sched scan
+		 * interval is specified, one scan plan will be set with this
+		 * scan interval and infinite number of iterations.
+		 */
+		if (!attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+			return ERR_PTR(-EINVAL);
+
+		n_plans = 1;
+	}
+
+	if (!n_plans || n_plans > wiphy->max_sched_scan_plans)
+		return ERR_PTR(-EINVAL);
+
 	request = kzalloc(sizeof(*request)
 			+ sizeof(*request->ssids) * n_ssids
 			+ sizeof(*request->match_sets) * n_match_sets
+			+ sizeof(*request->scan_plans) * n_plans
 			+ sizeof(*request->channels) * n_channels
 			+ ie_len, GFP_KERNEL);
 	if (!request)
@@ -6090,6 +6209,18 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 	}
 	request->n_match_sets = n_match_sets;
 
+	if (n_match_sets)
+		request->scan_plans = (void *)(request->match_sets +
+					       n_match_sets);
+	else if (request->ie)
+		request->scan_plans = (void *)(request->ie + ie_len);
+	else if (n_ssids)
+		request->scan_plans = (void *)(request->ssids + n_ssids);
+	else
+		request->scan_plans = (void *)(request->channels + n_channels);
+
+	request->n_scan_plans = n_plans;
+
 	i = 0;
 	if (attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
 		/* user specified, bail out if channel not found */
@@ -6252,7 +6383,10 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 		request->delay =
 			nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_DELAY]);
 
-	request->interval = interval;
+	err = nl80211_parse_sched_scan_plans(wiphy, n_plans, request, attrs);
+	if (err)
+		goto out_free;
+
 	request->scan_start = jiffies;
 
 	return request;
@@ -8850,7 +8984,7 @@ static int nl80211_send_wowlan_tcp(struct sk_buff *msg,
 static int nl80211_send_wowlan_nd(struct sk_buff *msg,
 				  struct cfg80211_sched_scan_request *req)
 {
-	struct nlattr *nd, *freqs, *matches, *match;
+	struct nlattr *nd, *freqs, *matches, *match, *scan_plans, *scan_plan;
 	int i;
 
 	if (!req)
@@ -8860,7 +8994,9 @@ static int nl80211_send_wowlan_nd(struct sk_buff *msg,
 	if (!nd)
 		return -ENOBUFS;
 
-	if (nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_INTERVAL, req->interval))
+	if (req->n_scan_plans == 1 &&
+	    nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_INTERVAL,
+			req->scan_plans[0].interval * 1000))
 		return -ENOBUFS;
 
 	if (nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_DELAY, req->delay))
@@ -8887,6 +9023,23 @@ static int nl80211_send_wowlan_nd(struct sk_buff *msg,
 		nla_nest_end(msg, matches);
 	}
 
+	scan_plans = nla_nest_start(msg, NL80211_ATTR_SCHED_SCAN_PLANS);
+	if (!scan_plans)
+		return -ENOBUFS;
+
+	for (i = 0; i < req->n_scan_plans; i++) {
+		scan_plan = nla_nest_start(msg, i + 1);
+		if (!scan_plan ||
+		    nla_put_u32(msg, NL80211_SCHED_SCAN_PLAN_INTERVAL,
+				req->scan_plans[i].interval) ||
+		    (req->scan_plans[i].iterations &&
+		     nla_put_u32(msg, NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+				 req->scan_plans[i].iterations)))
+			return -ENOBUFS;
+		nla_nest_end(msg, scan_plan);
+	}
+	nla_nest_end(msg, scan_plans);
+
 	nla_nest_end(msg, nd);
 
 	return 0;
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 3feaa03aa046..14d5369eb778 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -266,8 +266,7 @@ void __cfg80211_sched_scan_results(struct work_struct *wk)
 			spin_lock_bh(&rdev->bss_lock);
 			__cfg80211_bss_expire(rdev, request->scan_start);
 			spin_unlock_bh(&rdev->bss_lock);
-			request->scan_start =
-				jiffies + msecs_to_jiffies(request->interval);
+			request->scan_start = jiffies;
 		}
 		nl80211_send_sched_scan_results(rdev, request->dev);
 	}