OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix misc Kconfig typos 

Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
This commit is contained in:
Matt LaPlante 2006-11-30 05:22:59 +01:00 committed by Adrian Bunk
parent 5d3f083d8f
commit 3cb2fccc5f
24 changed files with 34 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/mach-ixp4xx/Kconfig
View File

@ -133,7 +133,7 @@ config IXP4XX_INDIRECT_PCI
into the kernel and we can use the standard read[bwl]/write[bwl]
macros. This is the preferred method due to speed but it
limits the system to just 64MB of PCI memory. This can be
problamatic if using video cards and other memory-heavy devices.
problematic if using video cards and other memory-heavy devices.
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access PCI This allows

2
arch/arm/mach-lh7a40x/Kconfig
View File

@ -8,7 +8,7 @@ config MACH_KEV7A400
help
Say Y here if you are using the Sharp KEV7A400 development
board. This hardware is discontinued, so I'd be very
suprised if you wanted this option.
surprised if you wanted this option.
config MACH_LPD7A400
bool "LPD7A400 Card Engine"

2
arch/arm/mach-s3c2410/Kconfig
View File

@ -91,7 +91,7 @@ config SMDK2440_CPU2442
config MACH_S3C2413
bool
help
Internal node for S3C2413 verison of SMDK2413, so that
Internal node for S3C2413 version of SMDK2413, so that
machine_is_s3c2413() will work when MACH_SMDK2413 is
selected

2
arch/arm/mm/Kconfig
View File

@ -197,7 +197,7 @@ config CPU_ARM940T
select CPU_CP15_MPU
help
ARM940T is a member of the ARM9TDMI family of general-
purpose microprocessors with MPU and seperate 4KB
purpose microprocessors with MPU and separate 4KB
instruction and 4KB data cases, each with a 4-word line
length.

2
arch/cris/arch-v10/Kconfig
View File

@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
depends on ETRAX_ARCH_V10
default "95a6"
help
Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a
Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a
good choice for most Axis products...
config ETRAX_DEF_R_BUS_CONFIG

2
arch/cris/arch-v10/drivers/Kconfig
View File

@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
default "0"
help
This controls the initial value of the trickle charge register.
0 = disabled (use this if you are unsure or have a non rechargable battery)
0 = disabled (use this if you are unsure or have a non rechargeable battery)
Otherwise the following values can be OR:ed together to control the
charge current:
1 = 2kohm, 2 = 4kohm, 3 = 4kohm

8
arch/cris/arch-v32/drivers/Kconfig
View File

@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN
help
Enables the DMA7 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
used when receiveing data.
used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN
help
Enables the DMA5 input channel for ser1 (ttyS1).
If you do not enable DMA, an interrupt for each character will be
used when receiveing data.
used when receiving data.
Normally you want this on, unless you use the DMA channel for
something else.
@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN
help
Enables the DMA3 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
used when receiveing data.
used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN
help
Enables the DMA9 input channel for ser3 (ttyS3).
If you do not enable DMA, an interrupt for each character will be
used when receiveing data.
used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.

4
arch/m68knommu/Kconfig
View File

@ -565,7 +565,7 @@ config ROMVEC
depends on ROM
help
This is almost always the same as the base of the ROM. Since on all
68000 type varients the vectors are at the base of the boot device
68000 type variants the vectors are at the base of the boot device
on system startup.
config ROMVECSIZE
@ -574,7 +574,7 @@ config ROMVECSIZE
depends on ROM
help
Define the size of the vector region in ROM. For most 68000
varients this would be 0x400 bytes in size. Set to 0 if you do
variants this would be 0x400 bytes in size. Set to 0 if you do
not want a vector region at the start of the ROM.
config ROMSTART

4
arch/mips/Kconfig
View File

@ -865,7 +865,7 @@ config MIPS_DISABLE_OBSOLETE_IDE
bool
#
# Endianess selection. Suffiently obscure so many users don't know what to
# Endianess selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
@ -874,7 +874,7 @@ choice
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different
Linux distribution. In general there is one prefered byteorder for a
Linux distribution. In general there is one preferred byteorder for a
particular system but some systems are just as commonly used in the
one or the other endianess.

2
arch/powerpc/Kconfig
View File

@ -425,7 +425,7 @@ config PPC_MAPLE
default n
help
This option enables support for the Maple 970FX Evaluation Board.
For more informations, refer to <http://www.970eval.com>
For more information, refer to <http://www.970eval.com>
config PPC_PASEMI
depends on PPC_MULTIPLATFORM && PPC64

4
arch/powerpc/platforms/83xx/Kconfig
View File

@ -21,7 +21,7 @@ config MPC834x_SYS
Be aware that PCI buses can only function when SYS board is plugged
into the PIB (Platform IO Board) board from Freescale which provide
3 PCI slots. The PIBs PCI initialization is the bootloader's
responsiblilty.
responsibility.
config MPC834x_ITX
bool "Freescale MPC834x ITX"
@ -30,7 +30,7 @@ config MPC834x_ITX
This option enables support for the MPC 834x ITX evaluation board.
Be aware that PCI initialization is the bootloader's
responsiblilty.
responsibility.
config MPC8360E_PB
bool "Freescale MPC8360E PB"

2
arch/ppc/Kconfig
View File

@ -724,7 +724,7 @@ config MPC834x_SYS
Be aware that PCI buses can only function when SYS board is plugged
into the PIB (Platform IO Board) board from Freescale which provide
3 PCI slots. The PIBs PCI initialization is the bootloader's
responsiblilty.
responsibility.
config EV64360
bool "Marvell-EV64360BP"

2
arch/sh/Kconfig
View File

@ -217,7 +217,7 @@ config SH_SHMIN
bool "SHMIN"
select CPU_SUBTYPE_SH7706
help
Select SHMIN if configureing for the SHMIN board
Select SHMIN if configuring for the SHMIN board.
config SH_UNKNOWN
bool "BareCPU"

4
arch/sparc/Kconfig
View File

@ -212,8 +212,8 @@ config SPARC_LED
tristate "Sun4m LED driver"
help
This driver toggles the front-panel LED on sun4m systems
in a user-specifyable manner. It's state can be probed
by reading /proc/led and it's blinking mode can be changed
in a user-specifiable manner. Its state can be probed
by reading /proc/led and its blinking mode can be changed
via writes to /proc/led
source "fs/Kconfig.binfmt"

2
drivers/char/Kconfig
View File

@ -994,7 +994,7 @@ config HPET
help
If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
open selects one of the timers supported by the HPET. The timers are
non-periodioc and/or periodic.
non-periodic and/or periodic.
config HPET_RTC_IRQ
bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC

2
drivers/media/video/Kconfig
View File

@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO
decode audio/video standards. This option will autoselect
all pertinent modules to each selected video module.
Unselect this only if you know exaclty what you are doing, since
Unselect this only if you know exactly what you are doing, since
it may break support on some boards.
In doubt, say Y.

2
drivers/mtd/maps/Kconfig
View File

@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE
default "4"
config MTD_SHARP_SL
bool "ROM maped on Sharp SL Series"
bool "ROM mapped on Sharp SL Series"
depends on MTD && ARCH_PXA
help
This enables access to the flash chip on the Sharp SL Series of PDAs.

4
drivers/net/Kconfig
View File

@ -32,7 +32,7 @@ config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
---help---
This is an intermidiate driver that allows sharing of
This is an intermediate driver that allows sharing of
resources.
To compile this driver as a module, choose M here: the module
will be called ifb. If you want to use more than one ifb
@ -2136,7 +2136,7 @@ config SK98LIN
This driver supports the original Yukon chipset. A cleaner driver is
also available (skge) which seems to work better than this one.
This driver does not support the newer Yukon2 chipset. A seperate
This driver does not support the newer Yukon2 chipset. A separate
driver, sky2, is provided to support Yukon2-based adapters.
The following adapters are supported by this driver:

4
drivers/net/phy/Kconfig
View File

@ -61,8 +61,8 @@ config FIXED_PHY
depends on PHYLIB
---help---
Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
but with the ability to manipulate with speed/link in software. The relavant MII
speed/duplex parameters could be effectively handled in user-specified fuction.
but with the ability to manipulate the speed/link in software. The relevant MII
speed/duplex parameters could be effectively handled in a user-specified function.
Currently tested with mpc866ads.
config FIXED_MII_10_FDX

2
drivers/pci/Kconfig
View File

@ -27,7 +27,7 @@ config PCI_MULTITHREAD_PROBE
smaller speedup on single processor machines.
But it can also cause lots of bad things to happen. A number
of PCI drivers can not properly handle running in this way,
of PCI drivers cannot properly handle running in this way,
some will just not work properly at all, while others might
decide to blow up power supplies with a huge load all at once,
so use this option at your own risk.

2
drivers/spi/Kconfig
View File

@ -16,7 +16,7 @@ config SPI
controller and a chipselect. Most SPI slaves don't support
dynamic device discovery; some are even write-only or read-only.
SPI is widely used by microcontollers to talk with sensors,
SPI is widely used by microcontrollers to talk with sensors,
eeprom and flash memory, codecs and various other controller
chips, analog to digital (and d-to-a) converters, and more.
MMC and SD cards can be accessed using SPI protocol; and for

2
drivers/usb/host/Kconfig
View File

@ -153,7 +153,7 @@ config USB_U132_HCD
adapter will *NOT* work with PC cards that do not contain an OHCI
controller.
For those PC cards that contain multiple OHCI controllers only ther
For those PC cards that contain multiple OHCI controllers only the
first one is used.
The driver consists of two modules, the "ftdi-elan" module is a

2
fs/Kconfig
View File

@ -1145,7 +1145,7 @@ config BEFS_FS
help
The BeOS File System (BeFS) is the native file system of Be, Inc's
BeOS. Notable features include support for arbitrary attributes
on files and directories, and database-like indeces on selected
on files and directories, and database-like indices on selected
attributes. (Also note that this driver doesn't make those features
available at this time). It is a 64 bit filesystem, so it supports
extremely large volumes and files.

4
sound/Kconfig
View File

@ -64,11 +64,11 @@ source "sound/arm/Kconfig"
source "sound/mips/Kconfig"
# the following will depenend on the order of config.
# the following will depend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"
# the following will depenend on the order of config.
# the following will depend on the order of config.
# here assuming PCMCIA is defined before ALSA
source "sound/pcmcia/Kconfig"