staging:iio: gpio build dependency fixing

Numerous drivers either had pointless includes of gpio.h
or should have been dependent on GENERIC_GPIO and were not.
Conversion of ads1210 to use array registration triggered
build failures that highlighted all was not well.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Jonathan Cameron 2011-10-12 10:57:33 +01:00 committed by Greg Kroah-Hartman
parent 41098f8f14
commit 3e2c96eab9
19 changed files with 9 additions and 17 deletions

View File

@ -67,6 +67,7 @@ config LIS3L02DQ
depends on SPI
select IIO_TRIGGER if IIO_BUFFER
depends on !IIO_BUFFER || IIO_KFIFO_BUF || IIO_SW_RING
depends on GENERIC_GPIO
help
Say yes here to build SPI support for the ST microelectronics
accelerometer. The driver supplies direct access via sysfs files

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -11,7 +11,6 @@
*/
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/slab.h>
@ -1167,7 +1166,7 @@ static int __devinit sca3000_probe(struct spi_device *spi)
iio_scan_mask_set(indio_dev->buffer, 2);
}
if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
if (spi->irq) {
ret = request_threaded_irq(spi->irq,
NULL,
&sca3000_event_handler,
@ -1184,7 +1183,7 @@ static int __devinit sca3000_probe(struct spi_device *spi)
return 0;
error_free_irq:
if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
if (spi->irq)
free_irq(spi->irq, indio_dev);
error_unregister_ring:
iio_buffer_unregister(indio_dev);
@ -1226,7 +1225,7 @@ static int sca3000_remove(struct spi_device *spi)
ret = sca3000_stop_all_interrupts(st);
if (ret)
return ret;
if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
if (spi->irq)
free_irq(spi->irq, indio_dev);
iio_buffer_unregister(indio_dev);
sca3000_unconfigure_ring(indio_dev);

View File

@ -150,6 +150,7 @@ config AD7746
config AD7816
tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver"
depends on SPI
depends on GENERIC_GPIO
help
Say yes here to build support for Analog Devices AD7816/7/8
temperature sensors and ADC.

View File

@ -5,6 +5,7 @@ menu "Analog digital bi-direction convertors"
config ADT7316
tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver"
depends on GENERIC_GPIO
help
Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318
and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC.

View File

@ -7,7 +7,6 @@
*/
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/kernel.h>

View File

@ -7,7 +7,6 @@
*/
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/kernel.h>

View File

@ -7,7 +7,6 @@
*/
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/module.h>

View File

@ -7,7 +7,6 @@
*/
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/kernel.h>

View File

@ -5,7 +5,6 @@
*
* Licensed under the GPL-2 or later.
*/
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -6,6 +6,7 @@ menu "Magnetometer sensors"
config SENSORS_AK8975
tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
depends on I2C
depends on GENERIC_GPIO
help
Say yes here to build support for Asahi Kasei AK8975 3-Axis
Magnetometer.

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -8,7 +8,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>

View File

@ -13,6 +13,7 @@ config AD2S90
config AD2S1200
tristate "Analog Devices ad2s1200/ad2s1205 driver"
depends on SPI
depends on GENERIC_GPIO
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1200 and ad2s1205, provides direct access
@ -21,6 +22,7 @@ config AD2S1200
config AD2S1210
tristate "Analog Devices ad2s1210 driver"
depends on SPI
depends on GENERIC_GPIO
help
Say yes here to build support for Analog Devices spi resolver
to digital converters, ad2s1210, provides direct access via sysfs.