OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

NetXen: Fix ping issue after reboot on Blades with 3.4.19 firmware 

NetXen: Fix initialization and subsequent ping issue on 3.4.19 firmware
This patch fixes the ping problem seen X/PBlades after the adapter's
firmware was moved to 3.4.19. After configured interface up, ping
failed.
NetXen adapter couldn't accept ARP broadcast packet. Manual addition of
MAC address in the ARP table, made ping work.
NetXen adapter should finish initilization after system boot. But looks
NetXen adapter didn't initilization correctly after system boot up.
So have to re-load the firmware again in probe routine.
Also re-initilization netxen_config_0 and netxen_config_1 registers.

Signed-off by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Mithlesh Thukral 2007-06-07 04:33:02 -07:00 committed by Jeff Garzik
parent b4fea61a19
commit 3e2facef86
2 changed files with 9 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/net/netxen/netxen_nic_main.c
View File

@ -542,6 +542,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
NETXEN_ROMUSB_GLB_PEGTUNE_DONE));
/* Handshake with the card before we register the devices. */
netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
/* leave the hw in the same state as reboot */
writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
netxen_pinit_from_rom(adapter, 0);
udelay(500);
netxen_load_firmware(adapter);
netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
}
/*

8
drivers/net/netxen/netxen_nic_niu.c
View File

@ -454,16 +454,12 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
{
u32 reg;
u32 portnum = physical_port[adapter->portnum];
netxen_crb_writelit_adapter(adapter,
NETXEN_NIU_XGE_CONFIG_0+(0x10000*portnum), 0x5);
netxen_nic_hw_read_wx(adapter,
NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), &reg, 4);
reg = (reg & ~0x2000UL);
NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447);
netxen_crb_writelit_adapter(adapter,
NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), reg);
NETXEN_NIU_XGE_CONFIG_0+(0x10000*portnum), 0x5);
return 0;
}