OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

media: usb: fix several typos 

Use codespell to fix lots of typos over frontends.

Manually verified to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit is contained in:
Mauro Carvalho Chehab 2019-02-18 14:29:03 -05:00
parent dda1bb4e97
commit 3e4d8f48b9
53 changed files with 81 additions and 81 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/media/usb/au0828/au0828-core.c
View File

@ -234,7 +234,7 @@ static void au0828_media_graph_notify(struct media_entity *new,
if (!new) {
/*
* Called during au0828 probe time to connect
* entites that were created prior to registering
* entities that were created prior to registering
* the notify handler. Find mixer and decoder.
*/
media_device_for_each_entity(entity, dev->media_dev) {

2
drivers/media/usb/au0828/au0828.h
View File

@ -52,7 +52,7 @@
#define AU0828_INTERLACED_DEFAULT 1
/* Defination for AU0828 USB transfer */
/* Definition for AU0828 USB transfer */
#define AU0828_MAX_ISO_BUFS 12 /* maybe resize this value in the future */
#define AU0828_ISO_PACKETS_PER_URB 128

2
drivers/media/usb/cx231xx/cx231xx-avcore.c
View File

@ -2987,7 +2987,7 @@ int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev)
{
int status = 0;
/* set SDA to ouput */
/* set SDA to output */
dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val);

2
drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h
View File

@ -86,7 +86,7 @@ enum TS_PORT{
#define EAVP_MASK 0x8
enum EAV_PRESENT{
NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs
(no need for i2s blcok),
(no need for i2s block),
Analog Tuner must be present */
EXTERNAL_AV = 0x8 /* 1: External A/V inputs
present (requires i2s blk) */

2
drivers/media/usb/cx231xx/cx231xx.h
View File

@ -646,7 +646,7 @@ struct cx231xx {
/* frame properties */
int width; /* current frame width */
int height; /* current frame height */
int interlaced; /* 1=interlace fileds, 0=just top fileds */
int interlaced; /* 1=interlace fields, 0=just top fields */
struct cx231xx_audio adev;

2
drivers/media/usb/dvb-usb-v2/dvb_usb.h
View File

@ -146,7 +146,7 @@ struct dvb_usb_rc {
};
/**
* usb streaming configration for adapter
* usb streaming configuration for adapter
* @type: urb type
* @count: count of used urbs
* @endpoint: stream usb endpoint number

8
drivers/media/usb/dvb-usb-v2/lmedm04.c
View File

@ -308,7 +308,7 @@ static void lme2510_int_response(struct urb *lme_urb)
switch (ibuf[0]) {
case 0xaa:
debug_data_snipet(1, "INT Remote data snipet", ibuf);
debug_data_snipet(1, "INT Remote data snippet", ibuf);
if (!adap_to_d(adap)->rc_dev)
break;
@ -358,13 +358,13 @@ static void lme2510_int_response(struct urb *lme_urb)
lme2510_update_stats(adap);
debug_data_snipet(5, "INT Remote data snipet in", ibuf);
debug_data_snipet(5, "INT Remote data snippet in", ibuf);
break;
case 0xcc:
debug_data_snipet(1, "INT Control data snipet", ibuf);
debug_data_snipet(1, "INT Control data snippet", ibuf);
break;
default:
debug_data_snipet(1, "INT Unknown data snipet", ibuf);
debug_data_snipet(1, "INT Unknown data snippet", ibuf);
break;
}
}

4
drivers/media/usb/dvb-usb-v2/mxl111sf.c
View File

@ -140,7 +140,7 @@ int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
if (mask != 0xff) {
ret = mxl111sf_read_reg(state, addr, &val);
#if 1
/* dont know why this usually errors out on the first try */
/* don't know why this usually errors out on the first try */
if (mxl_fail(ret))
pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...",
addr, mask, data);
@ -783,7 +783,7 @@ static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id)
if (mxl_fail(ret))
goto fail;
/* dont care if this fails */
/* don't care if this fails */
mxl111sf_init_port_expander(state);
adap->fe[fe_id] = dvb_attach(mxl111sf_demod_attach, state,

2
drivers/media/usb/dvb-usb/af9005.c
View File

@ -845,7 +845,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
/* deb_info("rc_query\n"); */
st->data[0] = 3; /* rest of packet length low */
st->data[1] = 0; /* rest of packet lentgh high */
st->data[1] = 0; /* rest of packet length high */
st->data[2] = 0x40; /* read remote */
st->data[3] = 1; /* rest of packet length */
st->data[4] = seq = st->sequence++; /* sequence number */

2
drivers/media/usb/dvb-usb/cinergyT2-fe.c
View File

@ -33,7 +33,7 @@
* This function is probably reusable and may better get placed in a support
* library.
*
* We replace errornous fields by default TPS fields (the ones with value 0).
* We replace erroneous fields by default TPS fields (the ones with value 0).
*/
static uint16_t compute_tps(struct dtv_frontend_properties *op)

2
drivers/media/usb/dvb-usb/cxusb.c
View File

@ -1016,7 +1016,7 @@ static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap)
/*
* No need to call dvb7000p_attach here, as it was called
* already, as frontend_attach method is called first, and
* tuner_attach is only called on sucess.
* tuner_attach is only called on success.
*/
tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
DIBX000_I2C_INTERFACE_TUNER, 1);

2
drivers/media/usb/dvb-usb/dvb-usb-init.c
View File

@ -98,7 +98,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
/*
* when reloading the driver w/o replugging the device
* sometimes a timeout occures, this helps
* sometimes a timeout occurs, this helps
*/
if (d->props.generic_bulk_ctrl_endpoint != 0) {
usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));

2
drivers/media/usb/dvb-usb/dvb-usb.h
View File

@ -336,7 +336,7 @@ struct usb_data_stream {
* struct dvb_usb_adapter - a DVB adapter on a USB device
* @id: index of this adapter (starting with 0).
*
* @feedcount: number of reqested feeds (used for streaming-activation)
* @feedcount: number of requested feeds (used for streaming-activation)
* @pid_filtering: is hardware pid_filtering used or not.
*
* @pll_addr: I2C address of the tuner for programming

4
drivers/media/usb/dvb-usb/pctv452e.c
View File

@ -528,13 +528,13 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i)
rx = b0 + 5;
/* hmm where shoud this should go? */
/* hmm where should this should go? */
ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE);
if (ret != 0)
info("%s: Warning set interface returned: %d\n",
__func__, ret);
/* this is a one-time initialization, dont know where to put */
/* this is a one-time initialization, don't know where to put */
b0[0] = 0xaa;
b0[1] = state->c++;
b0[2] = PCTV_CMD_RESET;

4
drivers/media/usb/em28xx/em28xx-i2c.c
View File

@ -296,7 +296,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
return ret;
}
/*
* NOTE: some devices with two i2c busses have the bad habit to return 0
* NOTE: some devices with two i2c buses have the bad habit to return 0
* bytes if we are on bus B AND there was no write attempt to the
* specified slave address before AND no device is present at the
* requested slave address.
@ -427,7 +427,7 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
return ret;
}
/*
* NOTE: some devices with two i2c busses have the bad habit to return 0
* NOTE: some devices with two i2c buses have the bad habit to return 0
* bytes if we are on bus B AND there was no write attempt to the
* specified slave address before AND no device is present at the
* requested slave address.

2
drivers/media/usb/em28xx/em28xx-reg.h
View File

@ -67,7 +67,7 @@
#define EM28XX_I2C_CLK_WAIT_ENABLE 0x40
#define EM28XX_I2C_EEPROM_ON_BOARD 0x08
#define EM28XX_I2C_EEPROM_KEY_VALID 0x04
#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c busses */
#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c buses */
#define EM28XX_I2C_FREQ_1_5_MHZ 0x03 /* bus frequency (bits [1-0]) */
#define EM28XX_I2C_FREQ_25_KHZ 0x02
#define EM28XX_I2C_FREQ_400_KHZ 0x01

2
drivers/media/usb/gspca/Kconfig
View File

@ -46,7 +46,7 @@ config USB_GSPCA_CPIA1
depends on VIDEO_V4L2 && USB_GSPCA
help
Say Y here if you want support for USB cameras based on the cpia
CPiA chip. Note that you need atleast version 0.6.4 of libv4l for
CPiA chip. Note that you need at least version 0.6.4 of libv4l for
applications to understand the videoformat generated by this driver.
To compile this driver as a module, choose M here: the

2
drivers/media/usb/gspca/autogain_functions.c
View File

@ -98,7 +98,7 @@ EXPORT_SYMBOL(gspca_expo_autogain);
80 %) and if that does not help, only then changes exposure. This leads
to a much more stable image then using the knee algorithm which at
certain points of the knee graph will only try to adjust exposure,
which leads to oscilating as one exposure step is huge.
which leads to oscillating as one exposure step is huge.
Returns 0 if no changes were made, 1 if the gain and or exposure settings
where changed. */

4
drivers/media/usb/gspca/benq.c
View File

@ -205,12 +205,12 @@ static void sd_isoc_irq(struct urb *urb)
* - 80 ba/bb 00 00 = start of image followed by 'ff d8'
* - 04 ba/bb oo oo = image piece
* where 'oo oo' is the image offset
(not cheked)
(not checked)
* - (other -> bad frame)
* The images are JPEG encoded with full header and
* normal ff escape.
* The end of image ('ff d9') may occur in any URB.
* (not cheked)
* (not checked)
*/
data = (u8 *) urb0->transfer_buffer
+ urb0->iso_frame_desc[i].offset;

10
drivers/media/usb/gspca/mr97310a.c
View File

@ -520,7 +520,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev)
switch (gspca_dev->pixfmt.width) {
case 160:
data[9] |= 0x04; /* reg 8, 2:1 scale down from 320 */
/* fall thru */
/* fall through */
case 320:
default:
data[3] = 0x28; /* reg 2, H size/8 */
@ -530,7 +530,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev)
break;
case 176:
data[9] |= 0x04; /* reg 8, 2:1 scale down from 352 */
/* fall thru */
/* fall through */
case 352:
data[3] = 0x2c; /* reg 2, H size/8 */
data[4] = 0x48; /* reg 3, V size/4 */
@ -617,10 +617,10 @@ static int start_vga_cam(struct gspca_dev *gspca_dev)
switch (gspca_dev->pixfmt.width) {
case 160:
data[9] |= 0x0c; /* reg 8, 4:1 scale down */
/* fall thru */
/* fall through */
case 320:
data[9] |= 0x04; /* reg 8, 2:1 scale down */
/* fall thru */
/* fall through */
case 640:
default:
data[3] = 0x50; /* reg 2, H size/8 */
@ -637,7 +637,7 @@ static int start_vga_cam(struct gspca_dev *gspca_dev)
case 176:
data[9] |= 0x04; /* reg 8, 2:1 scale down */
/* fall thru */
/* fall through */
case 352:
data[3] = 0x2c; /* reg 2, H size */
data[4] = 0x48; /* reg 3, V size */

4
drivers/media/usb/gspca/ov519.c
View File

@ -1945,7 +1945,7 @@ static const struct ov_i2c_regvals norm_8610[] = {
{ 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
{ 0x63, 0xff },
{ 0x64, 0x53 }, /* new windrv 090403 says 0x57,
* maybe thats wrong */
* maybe that's wrong */
{ 0x65, 0x00 },
{ 0x66, 0x55 },
{ 0x67, 0xb0 },
@ -3658,7 +3658,7 @@ static void ov518_mode_init_regs(struct sd *sd)
case SEN_OV7620AE:
/*
* HdG: 640x480 needs special handling on device
* revision 2, we check for device revison > 0 to
* revision 2, we check for device revision > 0 to
* avoid regressions, as we don't know the correct
* thing todo for revision 1.
*

2
drivers/media/usb/gspca/pac_common.h
View File

@ -21,7 +21,7 @@
/* We calculate the autogain at the end of the transfer of a frame, at this
moment a frame with the old settings is being captured and transmitted. So
if we adjust the gain or exposure we must ignore atleast the next frame for
if we adjust the gain or exposure we must ignore at least the next frame for
the new settings to come into effect before doing any other adjustments. */
#define PAC_AUTOGAIN_IGNORE_FRAMES 2

2
drivers/media/usb/gspca/sn9c20x.c
View File

@ -1634,7 +1634,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
break;
case SENSOR_HV7131R:
sd->i2c_intf = 0x81; /* i2c 400 Kb/s */
/* fall thru */
/* fall through */
default:
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);

4
drivers/media/usb/gspca/sonixb.c
View File

@ -121,7 +121,7 @@ struct sensor_data {
/* We calculate the autogain at the end of the transfer of a frame, at this
moment a frame with the old settings is being captured and transmitted. So
if we adjust the gain or exposure we must ignore atleast the next frame for
if we adjust the gain or exposure we must ignore at least the next frame for
the new settings to come into effect before doing any other adjustments. */
#define AUTOGAIN_IGNORE_FRAMES 1
@ -757,7 +757,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
/* Don't allow this to get below 10 when using autogain, the
steps become very large (relatively) when below 10 causing
the image to oscilate from much too dark, to much too bright
the image to oscillate from much too dark, to much too bright
and back again. */
if (gspca_dev->autogain->val && reg10 < 10)
reg10 = 10;

2
drivers/media/usb/gspca/sonixj.c
View File

@ -2677,7 +2677,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
* which is 62 bytes long and is followed by various information
* including statuses and luminosity.
*
* A marker may be splitted on two packets.
* A marker may be split on two packets.
*
* The 6th byte of a marker contains the bits:
* 0x08: USB full

2
drivers/media/usb/gspca/spca501.c
View File

@ -574,7 +574,7 @@ static const __u16 spca501_3com_open_data[][3] = {
{0x0, 0x0001, 0x0010}, /* TG Start Clock */
/* {0x2, 0x006a, 0x0001}, * C/S Enable ISOSYNCH Packet Engine */
{0x2, 0x0068, 0x0001}, /* C/S Diable ISOSYNCH Packet Engine */
{0x2, 0x0068, 0x0001}, /* C/S Disable ISOSYNCH Packet Engine */
{0x2, 0x0000, 0x0005},
{0x2, 0x0043, 0x0000}, /* C/S Set Timing Mode, Disable TG soft reset */
{0x2, 0x0043, 0x0000}, /* C/S Set Timing Mode, Disable TG soft reset */

2
drivers/media/usb/gspca/sq905.c
View File

@ -18,7 +18,7 @@
* History and Acknowledgments
*
* The original Linux driver for SQ905 based cameras was written by
* Marcell Lengyel and furter developed by many other contributors
* Marcell Lengyel and further developed by many other contributors
* and is available from http://sourceforge.net/projects/sqcam/
*
* This driver takes advantage of the reverse engineering work done for

4
drivers/media/usb/gspca/sunplus.c
View File

@ -555,7 +555,7 @@ static void init_ctl_reg(struct gspca_dev *gspca_dev)
case BRIDGE_SPCA504:
case BRIDGE_SPCA504C:
pollreg = 0;
/* fall thru */
/* fall through */
default:
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA504B: */
@ -638,7 +638,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00);
reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13);
reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00);
/* fall thru */
/* fall through */
case BRIDGE_SPCA533:
spca504B_PollingDataReady(gspca_dev);
spca50x_GetFirmware(gspca_dev);

2
drivers/media/usb/gspca/t613.c
View File

@ -966,7 +966,7 @@ static int sd_init_controls(struct gspca_dev *gspca_dev)
V4L2_CID_SATURATION, 0, 0xf, 1, 5);
v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 10);
/* Activate lowlight, some apps dont bring up the
/* Activate lowlight, some apps don't bring up the
backlight_compensation control) */
v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_BACKLIGHT_COMPENSATION, 0, 1, 1, 1);

4
drivers/media/usb/gspca/touptek.c
View File

@ -185,7 +185,7 @@ static const struct v4l2_pix_format vga_mode[] = {
};
/*
* As theres no known frame sync, the only way to keep synced is to try hard
* As there's no known frame sync, the only way to keep synced is to try hard
* to never miss any packets
*/
#if MAX_NURBS < 4
@ -259,7 +259,7 @@ static void setexposure(struct gspca_dev *gspca_dev, s32 val)
return;
}
gspca_dbg(gspca_dev, D_STREAM, "exposure: 0x%04X ms\n\n", value);
/* Wonder if theres a good reason for sending it twice */
/* Wonder if there's a good reason for sending it twice */
/* probably not but leave it in because...why not */
reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);

2
drivers/media/usb/gspca/w996Xcf.c
View File

@ -431,7 +431,7 @@ static void w9968cf_set_crop_window(struct sd *sd)
start_cropy = 35;
}
/* Work around to avoid FP arithmetics */
/* Work around to avoid FP arithmetic */
#define SC(x) ((x) << 10)
/* Scaling factors */

2
drivers/media/usb/gspca/zc3xx-reg.h
View File

@ -26,7 +26,7 @@
/* Test mode */
#define ZC3XX_R00B_TESTMODECONTROL 0x000b
/* Frame retreiving */
/* Frame retrieving */
#define ZC3XX_R00C_LASTACQTIME 0x000c
#define ZC3XX_R00D_MONITORRES 0x000d
#define ZC3XX_R00E_TIMESTAMPHIGH 0x000e

8
drivers/media/usb/gspca/zc3xx.c
View File

@ -3602,7 +3602,7 @@ static const struct usb_action pas106b_InitialScale[] = { /* 176x144 */
{0xaa, 0x14, 0x0081},
/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
/* Frame retreiving */
/* Frame retrieving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
/* Gains */
{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
@ -3718,7 +3718,7 @@ static const struct usb_action pas106b_Initial[] = { /* 352x288 */
{0xaa, 0x14, 0x0081},
/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
/* Frame retreiving */
/* Frame retrieving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
/* Gains */
{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
@ -6775,7 +6775,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_HV7131R:
case SENSOR_TAS5130C:
reg_r(gspca_dev, 0x0008);
/* fall thru */
/* fall through */
case SENSOR_PO2030:
reg_w(gspca_dev, 0x03, 0x0008);
break;
@ -6824,7 +6824,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_TAS5130C:
reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
reg_w(gspca_dev, 0x15, 0x01ae);
/* fall thru */
/* fall through */
case SENSOR_PAS202B:
case SENSOR_PO2030:
/* reg_w(gspca_dev, 0x40, ZC3XX_R117_GGAIN); in win traces */

2
drivers/media/usb/hdpvr/hdpvr.h
View File

@ -215,7 +215,7 @@ enum {
*/
/* :0 s 38 01 1700 0003 0001 1 = 00
* VIDEO STANDARD or FREQUNCY 0 = 60hz, 1 = 50hz
* VIDEO STANDARD or FREQUENCY 0 = 60hz, 1 = 50hz
*/
/* :0 s 38 01 3100 0003 0004 4 = 03030000

4
drivers/media/usb/pwc/pwc-dec23.c
View File

@ -41,7 +41,7 @@
* UNROLL_LOOP_FOR_COPYING_BLOCK
* 0: use a loop for a smaller code (but little slower)
* 1: when unrolling the loop, gcc produces some faster code (perhaps only
* valid for intel processor class). Activating this option, automaticaly
* valid for intel processor class). Activating this option, automatically
* activate USE_LOOKUP_TABLE_TO_CLAMP
*/
#define UNROLL_LOOP_FOR_COPY 1
@ -332,7 +332,7 @@ void pwc_dec23_init(struct pwc_device *pdev, const unsigned char *cmd)
build_table_color(TimonRomTable[version][1], pdec->table_0004_pass2, pdec->table_8004_pass2);
}
/* Informations can be coded on a variable number of bits but never less than 8 */
/* Information can be coded on a variable number of bits but never less than 8 */
shift = 8 - pdec->nbits;
pdec->scalebits = SCALEBITS - shift;
pdec->nbitsmask = 0xFF >> shift;

2
drivers/media/usb/pwc/pwc-if.c
View File

@ -653,7 +653,7 @@ static int buffer_prepare(struct vb2_buffer *vb)
{
struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
/* Don't allow queing new buffers after device disconnection */
/* Don't allow queueing new buffers after device disconnection */
if (!pdev->udev)
return -ENODEV;

2
drivers/media/usb/pwc/pwc-misc.c
View File

@ -59,7 +59,7 @@ int pwc_get_size(struct pwc_device *pdev, int width, int height)
return i;
}
/* Never reached there always is atleast one supported mode */
/* Never reached there always is at least one supported mode */
return 0;
}

2
drivers/media/usb/siano/smsusb.c
View File

@ -75,7 +75,7 @@ static int smsusb_submit_urb(struct smsusb_device_t *dev,
struct smsusb_urb_t *surb);
/*
* Completing URB's callback handler - bottom half (proccess context)
* Completing URB's callback handler - bottom half (process context)
* submits the URB prepared on smsusb_onresponse()
*/
static void do_submit_urb(struct work_struct *work)

4
drivers/media/usb/stk1160/stk1160-core.c
View File

@ -297,7 +297,7 @@ static int stk1160_probe(struct usb_interface *interface,
return -ENOMEM;
/*
* Scan usb posibilities and populate alt_max_pkt_size array.
* Scan usb possibilities and populate alt_max_pkt_size array.
* Also, check if device speed is fast enough.
*/
rc = stk1160_scan_usb(interface, udev, alt_max_pkt_size);
@ -426,7 +426,7 @@ static void stk1160_disconnect(struct usb_interface *interface)
/*
* This calls stk1160_release if it's the last reference.
* Otherwise, release is posponed until there are no users left.
* Otherwise, release is postponed until there are no users left.
*/
v4l2_device_put(&dev->v4l2_dev);
}

4
drivers/media/usb/stk1160/stk1160-reg.h
View File

@ -23,7 +23,7 @@
/* GPIO Control */
#define STK1160_GCTRL 0x000
/* Remote Wakup Control */
/* Remote Wakeup Control */
#define STK1160_RMCTL 0x00c
/* Power-on Strapping Data */
@ -104,7 +104,7 @@
#define STK1160_SBUSR_RA 0x208
#define STK1160_SBUSR_RD 0x209
/* Alternate Serial Inteface Control */
/* Alternate Serial Interface Control */
#define STK1160_ASIC 0x2fc
/* PLL Select Options */

2
drivers/media/usb/stkwebcam/stk-webcam.c
View File

@ -1006,7 +1006,7 @@ static int stk_setup_format(struct stk_camera *dev)
stk_camera_write_reg(dev, 0x001c, 0x46);
/*
* Registers 0x0115 0x0114 are the size of each line (bytes),
* regs 0x0117 0x0116 are the heigth of the image.
* regs 0x0117 0x0116 are the height of the image.
*/
stk_camera_write_reg(dev, 0x0115,
((stk_sizes[i].w * depth) >> 8) & 0xff);

2
drivers/media/usb/tm6000/tm6000-alsa.c
View File

@ -58,7 +58,7 @@ module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
/****************************************************************************
Module specific funtions
Module specific functions
****************************************************************************/
/*

4
drivers/media/usb/tm6000/tm6000-core.c
View File

@ -668,7 +668,7 @@ int tm6000_set_audio_rinput(struct tm6000_core *dev)
areg_f0 = 0x04;
break;
default:
printk(KERN_INFO "%s: audio input dosn't support\n",
printk(KERN_INFO "%s: audio input doesn't support\n",
dev->name);
return 0;
break;
@ -690,7 +690,7 @@ int tm6000_set_audio_rinput(struct tm6000_core *dev)
areg_eb = 0x04;
break;
default:
printk(KERN_INFO "%s: audio input dosn't support\n",
printk(KERN_INFO "%s: audio input doesn't support\n",
dev->name);
return 0;
break;

2
drivers/media/usb/tm6000/tm6000-dvb.c
View File

@ -149,7 +149,7 @@ static int tm6000_start_stream(struct tm6000_core *dev)
ret, __func__);
return ret;
} else
printk(KERN_ERR "tm6000: pipe resetted\n");
printk(KERN_ERR "tm6000: pipe reset\n");
/* mutex_lock(&tm6000_driver.open_close_mutex); */
ret = usb_submit_urb(dvb->bulk_urb, GFP_ATOMIC);

2
drivers/media/usb/tm6000/tm6000-i2c.c
View File

@ -155,7 +155,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
/*
* The TM6000 only supports a read transaction
* immediately after a 1 or 2 byte write to select
* a register. We cannot fulfil this request.
* a register. We cannot fulfill this request.
*/
i2c_dprintk(2, " read without preceding write not supported");
rc = -EOPNOTSUPP;

2
drivers/media/usb/tm6000/tm6000-stds.c
View File

@ -323,7 +323,7 @@ static int tm6000_set_audio_std(struct tm6000_core *dev)
{
uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */
uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */
uint8_t areg_06 = 0x02; /* Auto de-emphasis, mannual channel mode */
uint8_t areg_06 = 0x02; /* Auto de-emphasis, manual channel mode */
if (dev->radio) {
tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);

2
drivers/media/usb/tm6000/tm6000-video.c
View File

@ -180,7 +180,7 @@ static int copy_streams(u8 *data, unsigned long len,
field = (header >> 11) & 0x1;
line = (header >> 12) & 0x1ff;
cmd = (header >> 21) & 0x7;
/* Validates haeder fields */
/* Validates header fields */
if (size > TM6000_URB_MSG_LEN)
size = TM6000_URB_MSG_LEN;
pktsize = TM6000_URB_MSG_LEN;

2
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
View File

@ -306,7 +306,7 @@ static int ttusb_boot_dsp(struct ttusb *ttusb)
b[3] = 28;
/* upload dsp code in 32 byte steps (36 didn't work for me ...) */
/* 32 is max packet size, no messages should be splitted. */
/* 32 is max packet size, no messages should be split. */
for (i = 0; i < fw->size; i += 28) {
memcpy(&b[4], &fw->data[i], 28);

2
drivers/media/usb/ttusb-dec/ttusb_dec.c
View File

@ -284,7 +284,7 @@ static void ttusb_dec_handle_irq( struct urb *urb)
*
* this is an fact a bit too simple implementation;
* the box also reports a keyrepeat signal
* (with buffer[3] == 0x40) in an intervall of ~100ms.
* (with buffer[3] == 0x40) in an interval of ~100ms.
* But to handle this correctly we had to imlemenent some
* kind of timer which signals a 'key up' event if no
* keyrepeat signal is received for lets say 200ms.

8
drivers/media/usb/usbvision/usbvision-core.c
View File

@ -900,7 +900,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
if ((frame->curline + 1) >= frame->frmheight)
return parse_state_next_frame;
block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks splitted into different lines? */
block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks split into different lines? */
y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size)
+ block_split * uv_block_size;
@ -1865,7 +1865,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
value[4] = 0xA2; /* Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. */
value[5] = 0x00; /* Reg.49 DVI_YUV This has nothing to do with compression */
/* catched values for NT1004 */
/* caught values for NT1004 */
/* value[0] = 0xFF; Never apply intra mode automatically */
/* value[1] = 0xF1; Use full frame height for virtual strip width; One line per strip */
/* value[2] = 0x01; Force intra mode on all new frames */
@ -1943,7 +1943,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
/* SAA7113 uses 8 bit output */
value[0] = USBVISION_8_422_SYNC;
} else {
/* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses
/* I'm sure only about d2-d0 [010] 16 bit 4:2:2 using sync pulses
* as that is how saa7111 is configured */
value[0] = USBVISION_16_422_SYNC;
/* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/
@ -2146,7 +2146,7 @@ int usbvision_power_on(struct usb_usbvision *usbvision)
/*
* usbvision_begin_streaming()
* Sure you have to put bit 7 to 0, if not incoming frames are droped, but no
* Sure you have to put bit 7 to 0, if not incoming frames are dropped, but no
* idea about the rest
*/
int usbvision_begin_streaming(struct usb_usbvision *usbvision)

8
drivers/media/usb/usbvision/usbvision.h
View File

@ -135,11 +135,11 @@
#define MIN_FRAME_WIDTH 64
#define MAX_USB_WIDTH 320 /* 384 */
#define MAX_FRAME_WIDTH 320 /* 384 */ /* streching sometimes causes crashes*/
#define MAX_FRAME_WIDTH 320 /* 384 */ /* stretching sometimes causes crashes*/
#define MIN_FRAME_HEIGHT 48
#define MAX_USB_HEIGHT 240 /* 288 */
#define MAX_FRAME_HEIGHT 240 /* 288 */ /* Streching sometimes causes crashes*/
#define MAX_FRAME_HEIGHT 240 /* 288 */ /* Stretching sometimes causes crashes*/
#define MAX_FRAME_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
#define USBVISION_CLIPMASK_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */
@ -177,7 +177,7 @@ enum {
* G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
* R = 1.164*(Y-16) + 1.596*(U-128)
*
* If you fancy integer arithmetics (as you should), hear this:
* If you fancy integer arithmetic (as you should), hear this:
*
* 65536*B = 76284*(Y-16) + 132252*(V-128)
* 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128)
@ -438,7 +438,7 @@ struct usb_usbvision {
int last_compr_level; /* How strong (100) or weak (0) was compression */
int usb_bandwidth; /* Mbit/s */
/* Statistics that can be overlayed on the screen */
/* Statistics that can be overlaid on the screen */
unsigned long isoc_urb_count; /* How many URBs we received so far */
unsigned long urb_length; /* Length of last URB */
unsigned long isoc_data_count; /* How many bytes we received */

2
drivers/media/usb/uvc/uvc_video.c
View File

@ -2008,7 +2008,7 @@ int uvc_video_init(struct uvc_streaming *stream)
usb_set_interface(stream->dev->udev, stream->intfnum, 0);
/* Set the streaming probe control with default streaming parameters
* retrieved from the device. Webcams that don't suport GET_DEF
* retrieved from the device. Webcams that don't support GET_DEF
* requests on the probe control will just keep their current streaming
* parameters.
*/

2
drivers/media/usb/zr364xx/zr364xx.c
View File

@ -2,7 +2,7 @@
* Zoran 364xx based USB webcam module version 0.73
*
* Allows you to use your USB webcam with V4L2 applications
* This is still in heavy developpement !
* This is still in heavy development !
*
* Copyright (C) 2004 Antoine Jacquet <royale@zerezo.com>
* http://royale.zerezo.com/zr364xx/