regulator: Add driver for gpio-controlled regulators

This patch adds support for regulators that can be controlled via gpios.

Examples for such regulators are the TI-tps65024x voltage regulators
with 4 fixed and 1 runtime-switchable voltage regulators
or the TI-bq240XX charger regulators.

The number of controlling gpios is not limited, the mapping between
voltage/current and target gpio state is done via the states map
and the driver can be used for either voltage or current regulators.

A mapping for a regulator with two GPIOs could look like:

gpios = {
	{ .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" },
	{ .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW,  .label = "gpio name 2" },
}

The flags element of the gpios array determines the initial state of
the gpio, set during probe. The initial state of the regulator is also
calculated from these values

states = {
	{ .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) },
	{ .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) },
	{ .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) },
	{ .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) },
}

The target-state for the n-th gpio is determined by the n-th bit
in the bitfield of the target-value.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Heiko Stübner 2011-10-05 12:27:05 +02:00 committed by Mark Brown
parent e3efe6669b
commit 3f0292ae8b
4 changed files with 454 additions and 0 deletions

View File

@ -64,6 +64,15 @@ config REGULATOR_USERSPACE_CONSUMER
If unsure, say no.
config REGULATOR_GPIO
tristate "GPIO regulator support"
help
This driver provides support for regulators that can be
controlled via gpios.
It is capable of supporting current and voltage regulators
and the platform has to provide a mapping of GPIO-states
to target volts/amps.
config REGULATOR_BQ24022
tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
help

View File

@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o

View File

@ -0,0 +1,357 @@
/*
* gpio-regulator.c
*
* Copyright 2011 Heiko Stuebner <heiko@sntech.de>
*
* based on fixed.c
*
* Copyright 2008 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* Copyright (c) 2009 Nokia Corporation
* Roger Quadros <ext-roger.quadros@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This is useful for systems with mixed controllable and
* non-controllable regulators, as well as for allowing testing on
* systems with no controllable regulators.
*/
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/slab.h>
struct gpio_regulator_data {
struct regulator_desc desc;
struct regulator_dev *dev;
int enable_gpio;
bool enable_high;
bool is_enabled;
unsigned startup_delay;
struct gpio *gpios;
int nr_gpios;
struct gpio_regulator_state *states;
int nr_states;
int state;
};
static int gpio_regulator_is_enabled(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
return data->is_enabled;
}
static int gpio_regulator_enable(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
if (gpio_is_valid(data->enable_gpio)) {
gpio_set_value_cansleep(data->enable_gpio, data->enable_high);
data->is_enabled = true;
}
return 0;
}
static int gpio_regulator_disable(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
if (gpio_is_valid(data->enable_gpio)) {
gpio_set_value_cansleep(data->enable_gpio, !data->enable_high);
data->is_enabled = false;
}
return 0;
}
static int gpio_regulator_enable_time(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
return data->startup_delay;
}
static int gpio_regulator_get_value(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
int ptr;
for (ptr = 0; ptr < data->nr_states; ptr++)
if (data->states[ptr].gpios == data->state)
return data->states[ptr].value;
return -EINVAL;
}
static int gpio_regulator_set_value(struct regulator_dev *dev,
int min, int max)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
int ptr, target, state;
target = -1;
for (ptr = 0; ptr < data->nr_states; ptr++)
if (data->states[ptr].value >= min &&
data->states[ptr].value <= max)
target = data->states[ptr].gpios;
if (target < 0)
return -EINVAL;
for (ptr = 0; ptr < data->nr_gpios; ptr++) {
state = (target & (1 << ptr)) >> ptr;
gpio_set_value(data->gpios[ptr].gpio, state);
}
data->state = target;
return 0;
}
static int gpio_regulator_set_voltage(struct regulator_dev *dev,
int min_uV, int max_uV,
unsigned *selector)
{
return gpio_regulator_set_value(dev, min_uV, max_uV);
}
static int gpio_regulator_list_voltage(struct regulator_dev *dev,
unsigned selector)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
if (selector >= data->nr_states)
return -EINVAL;
return data->states[selector].value;
}
static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
int min_uA, int max_uA)
{
return gpio_regulator_set_value(dev, min_uA, max_uA);
}
static struct regulator_ops gpio_regulator_voltage_ops = {
.is_enabled = gpio_regulator_is_enabled,
.enable = gpio_regulator_enable,
.disable = gpio_regulator_disable,
.enable_time = gpio_regulator_enable_time,
.get_voltage = gpio_regulator_get_value,
.set_voltage = gpio_regulator_set_voltage,
.list_voltage = gpio_regulator_list_voltage,
};
static struct regulator_ops gpio_regulator_current_ops = {
.is_enabled = gpio_regulator_is_enabled,
.enable = gpio_regulator_enable,
.disable = gpio_regulator_disable,
.enable_time = gpio_regulator_enable_time,
.get_current_limit = gpio_regulator_get_value,
.set_current_limit = gpio_regulator_set_current_limit,
};
static int __devinit gpio_regulator_probe(struct platform_device *pdev)
{
struct gpio_regulator_config *config = pdev->dev.platform_data;
struct gpio_regulator_data *drvdata;
int ptr, ret, state;
drvdata = kzalloc(sizeof(struct gpio_regulator_data), GFP_KERNEL);
if (drvdata == NULL) {
dev_err(&pdev->dev, "Failed to allocate device data\n");
return -ENOMEM;
}
drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
ret = -ENOMEM;
goto err;
}
drvdata->gpios = kmemdup(config->gpios,
config->nr_gpios * sizeof(struct gpio),
GFP_KERNEL);
if (drvdata->gpios == NULL) {
dev_err(&pdev->dev, "Failed to allocate gpio data\n");
ret = -ENOMEM;
goto err_name;
}
drvdata->states = kmemdup(config->states,
config->nr_states *
sizeof(struct gpio_regulator_state),
GFP_KERNEL);
if (drvdata->states == NULL) {
dev_err(&pdev->dev, "Failed to allocate state data\n");
ret = -ENOMEM;
goto err_memgpio;
}
drvdata->nr_states = config->nr_states;
drvdata->desc.owner = THIS_MODULE;
/* handle regulator type*/
switch (config->type) {
case REGULATOR_VOLTAGE:
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.ops = &gpio_regulator_voltage_ops;
drvdata->desc.n_voltages = config->nr_states;
break;
case REGULATOR_CURRENT:
drvdata->desc.type = REGULATOR_CURRENT;
drvdata->desc.ops = &gpio_regulator_current_ops;
break;
default:
dev_err(&pdev->dev, "No regulator type set\n");
ret = -EINVAL;
goto err_memgpio;
break;
}
drvdata->enable_gpio = config->enable_gpio;
drvdata->startup_delay = config->startup_delay;
if (gpio_is_valid(config->enable_gpio)) {
drvdata->enable_high = config->enable_high;
ret = gpio_request(config->enable_gpio, config->supply_name);
if (ret) {
dev_err(&pdev->dev,
"Could not obtain regulator enable GPIO %d: %d\n",
config->enable_gpio, ret);
goto err_memstate;
}
/* set output direction without changing state
* to prevent glitch
*/
if (config->enabled_at_boot) {
drvdata->is_enabled = true;
ret = gpio_direction_output(config->enable_gpio,
config->enable_high);
} else {
drvdata->is_enabled = false;
ret = gpio_direction_output(config->enable_gpio,
!config->enable_high);
}
if (ret) {
dev_err(&pdev->dev,
"Could not configure regulator enable GPIO %d direction: %d\n",
config->enable_gpio, ret);
goto err_enablegpio;
}
} else {
/* Regulator without GPIO control is considered
* always enabled
*/
drvdata->is_enabled = true;
}
drvdata->nr_gpios = config->nr_gpios;
ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
if (ret) {
dev_err(&pdev->dev,
"Could not obtain regulator setting GPIOs: %d\n", ret);
goto err_enablegpio;
}
/* build initial state from gpio init data. */
state = 0;
for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
state |= (1 << ptr);
}
drvdata->state = state;
drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
config->init_data, drvdata);
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
goto err_stategpio;
}
platform_set_drvdata(pdev, drvdata);
return 0;
err_stategpio:
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
err_enablegpio:
if (gpio_is_valid(config->enable_gpio))
gpio_free(config->enable_gpio);
err_memstate:
kfree(drvdata->states);
err_memgpio:
kfree(drvdata->gpios);
err_name:
kfree(drvdata->desc.name);
err:
kfree(drvdata);
return ret;
}
static int __devexit gpio_regulator_remove(struct platform_device *pdev)
{
struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
regulator_unregister(drvdata->dev);
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
kfree(drvdata->states);
kfree(drvdata->gpios);
if (gpio_is_valid(drvdata->enable_gpio))
gpio_free(drvdata->enable_gpio);
kfree(drvdata->desc.name);
kfree(drvdata);
return 0;
}
static struct platform_driver gpio_regulator_driver = {
.probe = gpio_regulator_probe,
.remove = __devexit_p(gpio_regulator_remove),
.driver = {
.name = "gpio-regulator",
.owner = THIS_MODULE,
},
};
static int __init gpio_regulator_init(void)
{
return platform_driver_register(&gpio_regulator_driver);
}
subsys_initcall(gpio_regulator_init);
static void __exit gpio_regulator_exit(void)
{
platform_driver_unregister(&gpio_regulator_driver);
}
module_exit(gpio_regulator_exit);
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
MODULE_DESCRIPTION("gpio voltage regulator");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio-regulator");

View File

@ -0,0 +1,87 @@
/*
* gpio-regulator.h
*
* Copyright 2011 Heiko Stuebner <heiko@sntech.de>
*
* based on fixed.h
*
* Copyright 2008 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* Copyright (c) 2009 Nokia Corporation
* Roger Quadros <ext-roger.quadros@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*/
#ifndef __REGULATOR_GPIO_H
#define __REGULATOR_GPIO_H
struct regulator_init_data;
enum regulator_type;
/**
* struct gpio_regulator_state - state description
* @value: microvolts or microamps
* @gpios: bitfield of gpio target-states for the value
*
* This structure describes a supported setting of the regulator
* and the necessary gpio-state to achieve it.
*
* The n-th bit in the bitfield describes the state of the n-th GPIO
* from the gpios-array defined in gpio_regulator_config below.
*/
struct gpio_regulator_state {
int value;
int gpios;
};
/**
* struct gpio_regulator_config - config structure
* @supply_name: Name of the regulator supply
* @enable_gpio: GPIO to use for enable control
* set to -EINVAL if not used
* @enable_high: Polarity of enable GPIO
* 1 = Active high, 0 = Active low
* @enabled_at_boot: Whether regulator has been enabled at
* boot or not. 1 = Yes, 0 = No
* This is used to keep the regulator at
* the default state
* @startup_delay: Start-up time in microseconds
* @gpios: Array containing the gpios needed to control
* the setting of the regulator
* @nr_gpios: Number of gpios
* @states: Array of gpio_regulator_state entries describing
* the gpio state for specific voltages
* @nr_states: Number of states available
* @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE
* @init_data: regulator_init_data
*
* This structure contains gpio-voltage regulator configuration
* information that must be passed by platform code to the
* gpio-voltage regulator driver.
*/
struct gpio_regulator_config {
const char *supply_name;
int enable_gpio;
unsigned enable_high:1;
unsigned enabled_at_boot:1;
unsigned startup_delay;
struct gpio *gpios;
int nr_gpios;
struct gpio_regulator_state *states;
int nr_states;
enum regulator_type type;
struct regulator_init_data *init_data;
};
#endif