[PATCH] x86-64: Support dualcore and 8 socket systems in k8 fallback node parsing

In particular on systems where the local APIC space and node space
is very different from the Linux CPU number space.

Previously the older NUMA setup code directly parsing the K8
northbridge registers had some issues on 8 socket or dual core
systems. This patch fixes them.

This is mainly done by fixing some confusion between Linux
CPU numbers and local APIC ids. We now pass the local APIC IDs
to later code, which avoids mismatches.

Also add some heuristics to detect cases where the Hypertransport
nodeids and the local APIC IDs don't match, but are shifted
by a constant offset.

This is still all quite hackish, hopefully BIOS writers fill
in correct SRATs instead.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Andi Kleen 2005-09-12 18:49:24 +02:00 committed by Linus Torvalds
parent b91691164b
commit 3f098c2605
4 changed files with 63 additions and 25 deletions

View File

@ -755,6 +755,24 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
}
}
#ifdef CONFIG_NUMA
static int nearby_node(int apicid)
{
int i;
for (i = apicid - 1; i >= 0; i--) {
int node = apicid_to_node[i];
if (node != NUMA_NO_NODE && node_online(node))
return node;
}
for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
int node = apicid_to_node[i];
if (node != NUMA_NO_NODE && node_online(node))
return node;
}
return first_node(node_online_map); /* Shouldn't happen */
}
#endif
/*
* On a AMD dual core setup the lower bits of the APIC id distingush the cores.
* Assumes number of cores is a power of two.
@ -763,9 +781,11 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
int cpu = smp_processor_id();
int node = 0;
unsigned bits;
#ifdef CONFIG_NUMA
int node = 0;
unsigned apicid = phys_proc_id[cpu];
#endif
bits = 0;
while ((1 << bits) < c->x86_num_cores)
@ -777,24 +797,32 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
phys_proc_id[cpu] >>= bits;
#ifdef CONFIG_NUMA
/* When an ACPI SRAT table is available use the mappings from SRAT
instead. */
node = phys_proc_id[cpu];
if (acpi_numa > 0) {
if (apicid_to_node[apicid] != NUMA_NO_NODE)
node = apicid_to_node[apicid];
else
printk(KERN_ERR
"SRAT: Didn't specify node for CPU %d(%d)\n",
cpu, apicid);
}
if (!node_online(node))
node = first_node(node_online_map);
cpu_to_node[cpu] = node;
#endif
node = phys_proc_id[cpu];
if (apicid_to_node[apicid] != NUMA_NO_NODE)
node = apicid_to_node[apicid];
if (!node_online(node)) {
/* Two possibilities here:
- The CPU is missing memory and no node was created.
In that case try picking one from a nearby CPU
- The APIC IDs differ from the HyperTransport node IDs
which the K8 northbridge parsing fills in.
Assume they are all increased by a constant offset,
but in the same order as the HT nodeids.
If that doesn't result in a usable node fall back to the
path for the previous case. */
int ht_nodeid = apicid - (phys_proc_id[0] << bits);
if (ht_nodeid >= 0 &&
apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
node = apicid_to_node[ht_nodeid];
/* Pick a nearby node */
if (!node_online(node))
node = nearby_node(apicid);
}
cpu_to_node[cpu] = node;
printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
#endif
#endif
}

View File

@ -45,10 +45,12 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
unsigned long prevbase;
struct node nodes[8];
int nodeid, i, nb;
unsigned char nodeids[8];
int found = 0;
u32 reg;
unsigned numnodes;
nodemask_t nodes_parsed;
unsigned dualcore = 0;
nodes_clear(nodes_parsed);
@ -67,11 +69,15 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
prevbase = 0;
for (i = 0; i < 8; i++) {
unsigned long base,limit;
u32 nodeid;
/* Undefined before E stepping, but hopefully 0 */
dualcore |= ((read_pci_config(0, nb, 3, 0xe8) >> 12) & 3) == 1;
base = read_pci_config(0, nb, 1, 0x40 + i*8);
limit = read_pci_config(0, nb, 1, 0x44 + i*8);
nodeid = limit & 7;
nodeids[i] = nodeid;
if ((base & 3) == 0) {
if (i < numnodes)
printk("Skipping disabled node %d\n", i);
@ -157,8 +163,9 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
for (i = 0; i < 8; i++) {
if (nodes[i].start != nodes[i].end) {
/* assume 1:1 NODE:CPU */
cpu_to_node[i] = i;
nodeid = nodeids[i];
apicid_to_node[nodeid << dualcore] = i;
apicid_to_node[(nodeid << dualcore) + dualcore] = i;
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
}
}

View File

@ -28,11 +28,13 @@ bootmem_data_t plat_node_bdata[MAX_NUMNODES];
int memnode_shift;
u8 memnodemap[NODEMAPSIZE];
unsigned char cpu_to_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = NUMA_NO_NODE };
unsigned char apicid_to_node[256] __cpuinitdata = {
[0 ... NR_CPUS-1] = NUMA_NO_NODE
unsigned char cpu_to_node[NR_CPUS] __read_mostly = {
[0 ... NR_CPUS-1] = NUMA_NO_NODE
};
cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly;
unsigned char apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
};
cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly;
int numa_off __initdata;

View File

@ -113,6 +113,7 @@
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
#define MAX_IO_APICS 128
#define MAX_LOCAL_APIC 256
/*
* All x86-64 systems are xAPIC compatible.