bnx2: Reorganize timeout constants.

Move all related timeout constants to the same location.  BNX2
prefix is also added to make them more consistent.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Michael Chan 2008-11-12 16:02:45 -08:00 committed by David S. Miller
parent d8026d9394
commit 40105c0b07
2 changed files with 11 additions and 11 deletions

View File

@ -1656,7 +1656,7 @@ bnx2_setup_serdes_phy(struct bnx2 *bp, u8 port)
* exchanging base pages plus 3 next pages and
* normally completes in about 120 msec.
*/
bp->current_interval = SERDES_AN_TIMEOUT;
bp->current_interval = BNX2_SERDES_AN_TIMEOUT;
bp->serdes_an_pending = 1;
mod_timer(&bp->timer, jiffies + bp->current_interval);
} else {
@ -2278,7 +2278,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)
return 0;
/* wait for an acknowledgement. */
for (i = 0; i < (FW_ACK_TIME_OUT_MS / 10); i++) {
for (i = 0; i < (BNX2_FW_ACK_TIME_OUT_MS / 10); i++) {
msleep(10);
val = bnx2_shmem_rd(bp, BNX2_FW_MB);
@ -5705,7 +5705,7 @@ bnx2_5708_serdes_timer(struct bnx2 *bp)
bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
if (bmcr & BMCR_ANENABLE) {
bnx2_enable_forced_2g5(bp);
bp->current_interval = SERDES_FORCED_TIMEOUT;
bp->current_interval = BNX2_SERDES_FORCED_TIMEOUT;
} else {
bnx2_disable_forced_2g5(bp);
bp->serdes_an_pending = 2;
@ -6522,7 +6522,7 @@ bnx2_nway_reset(struct net_device *dev)
spin_lock_bh(&bp->phy_lock);
bp->current_interval = SERDES_AN_TIMEOUT;
bp->current_interval = BNX2_SERDES_AN_TIMEOUT;
bp->serdes_an_pending = 1;
mod_timer(&bp->timer, jiffies + bp->current_interval);
}

View File

@ -6679,8 +6679,6 @@ struct bnx2_napi {
struct bnx2_tx_ring_info tx_ring;
};
#define BNX2_TIMER_INTERVAL HZ
struct bnx2 {
/* Fields used in the tx and intr/napi performance paths are grouped */
/* together in the beginning of the structure. */
@ -6728,7 +6726,11 @@ struct bnx2 {
/* End of fields used in the performance code paths. */
int current_interval;
unsigned int current_interval;
#define BNX2_TIMER_INTERVAL HZ
#define BNX2_SERDES_AN_TIMEOUT (HZ / 3)
#define BNX2_SERDES_FORCED_TIMEOUT (HZ / 10)
struct timer_list timer;
struct work_struct reset_task;
@ -6860,8 +6862,6 @@ struct bnx2 {
#define PHY_LOOPBACK 2
u8 serdes_an_pending;
#define SERDES_AN_TIMEOUT (HZ / 3)
#define SERDES_FORCED_TIMEOUT (HZ / 10)
u8 mac_addr[8];
@ -6959,14 +6959,14 @@ struct fw_info {
/* This value (in milliseconds) determines the frequency of the driver
* issuing the PULSE message code. The firmware monitors this periodic
* pulse to determine when to switch to an OS-absent mode. */
#define DRV_PULSE_PERIOD_MS 250
#define BNX2_DRV_PULSE_PERIOD_MS 250
/* This value (in milliseconds) determines how long the driver should
* wait for an acknowledgement from the firmware before timing out. Once
* the firmware has timed out, the driver will assume there is no firmware
* running and there won't be any firmware-driver synchronization during a
* driver reset. */
#define FW_ACK_TIME_OUT_MS 1000
#define BNX2_FW_ACK_TIME_OUT_MS 1000
#define BNX2_DRV_RESET_SIGNATURE 0x00000000