ath10k: use kzalloc to read for ath10k_sdio_hif_diag_read
When use command to read values, it crashed. command: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233)) It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4. Then system crash: [ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000 [ 1786.013273] Mem abort info: [ 1786.013281] ESR = 0x96000045 [ 1786.013291] Exception class = DABT (current EL), IL = 32 bits [ 1786.013299] SET = 0, FnV = 0 [ 1786.013307] EA = 0, S1PTW = 0 [ 1786.013314] Data abort info: [ 1786.013322] ISV = 0, ISS = 0x00000045 [ 1786.013330] CM = 0, WnR = 1 [ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e [ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000 [ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6) [ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137 [ 1786.013631] Hardware name: MediaTek krane sku176 board (DT) [ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 1786.013662] pc : __memcpy+0x94/0x180 [ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150 [ 1786.013686] sp : ffffff8008003c60 [ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80 [ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8 [ 1786.013721] x25: 0000000000000000 x24: 0000000000000001 [ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4 [ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000 [ 1786.013760] x19: 0000000000000004 x18: 0000000000000020 [ 1786.013773] x17: 0000000000000001 x16: 0000000000000000 [ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0 [ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000 [ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000 [ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000 [ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000 [ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000 [ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004 [ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000 [ 1786.013891] Call trace: [ 1786.013903] __memcpy+0x94/0x180 [ 1786.013914] unmap_single+0x6c/0x84 [ 1786.013925] swiotlb_unmap_sg_attrs+0x54/0x80 [ 1786.013938] __swiotlb_unmap_sg_attrs+0x8c/0xa4 [ 1786.013952] msdc_unprepare_data+0x6c/0x84 [ 1786.013963] msdc_request_done+0x58/0x84 [ 1786.013974] msdc_data_xfer_done+0x1a0/0x1c8 [ 1786.013985] msdc_irq+0x12c/0x17c [ 1786.013996] __handle_irq_event_percpu+0xe4/0x250 [ 1786.014006] handle_irq_event_percpu+0x28/0x68 [ 1786.014015] handle_irq_event+0x48/0x78 [ 1786.014026] handle_fasteoi_irq+0xd0/0x1a0 [ 1786.014039] __handle_domain_irq+0x84/0xc4 [ 1786.014050] gic_handle_irq+0x124/0x1a4 [ 1786.014059] el1_irq+0xb0/0x128 [ 1786.014072] cpuidle_enter_state+0x298/0x328 [ 1786.014082] cpuidle_enter+0x30/0x40 [ 1786.014094] do_idle+0x190/0x268 [ 1786.014104] cpu_startup_entry+0x24/0x28 [ 1786.014116] rest_init+0xd4/0xe0 [ 1786.014126] start_kernel+0x30c/0x38c [ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3) [ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]--- [ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt [ 1786.015433] SMP: stopping secondary CPUs [ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000 [ 1786.015458] CPU features: 0x0,2188200c [ 1786.015466] Memory Limit: none For sdio chip, it need the memory which is kmalloc, if it is vmalloc from ath10k_mem_value_read, then it have a memory error. kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer which is vmalloc from ath10k_mem_value_read. This patch only effect sdio chip. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This commit is contained in:
parent
37b7ecb756
commit
402f2992b4
@ -1650,23 +1650,33 @@ static int ath10k_sdio_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
|
||||
size_t buf_len)
|
||||
{
|
||||
int ret;
|
||||
void *mem;
|
||||
|
||||
mem = kzalloc(buf_len, GFP_KERNEL);
|
||||
if (!mem)
|
||||
return -ENOMEM;
|
||||
|
||||
/* set window register to start read cycle */
|
||||
ret = ath10k_sdio_write32(ar, MBOX_WINDOW_READ_ADDR_ADDRESS, address);
|
||||
if (ret) {
|
||||
ath10k_warn(ar, "failed to set mbox window read address: %d", ret);
|
||||
return ret;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* read the data */
|
||||
ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, buf, buf_len);
|
||||
ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, mem, buf_len);
|
||||
if (ret) {
|
||||
ath10k_warn(ar, "failed to read from mbox window data address: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
goto out;
|
||||
}
|
||||
|
||||
return 0;
|
||||
memcpy(buf, mem, buf_len);
|
||||
|
||||
out:
|
||||
kfree(mem);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ath10k_sdio_hif_diag_read32(struct ath10k *ar, u32 address,
|
||||
|
Loading…
Reference in New Issue
Block a user