OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[BNX2]: Add 40-bit DMA workaround for 5708. 

The internal PCIE-to-PCIX bridge of the 5708 has the same 40-bit DMA
limitation as some of the tg3 chips.  Set dma_mask and persistent DMA
mask to 40-bit to workaround.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Michael Chan 2007-05-03 13:19:18 -07:00 committed by David S. Miller
parent 5bae30c96a
commit 40453c839f
2 changed files with 21 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
drivers/net/bnx2.c
View File

@ -5711,6 +5711,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
unsigned long mem_len;
int rc;
u32 reg;
u64 dma_mask, persist_dma_mask;
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
@ -5749,21 +5750,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
goto err_out_release;
}
if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) {
bp->flags |= USING_DAC_FLAG;
if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
dev_err(&pdev->dev,
"pci_set_consistent_dma_mask failed, aborting.\n");
rc = -EIO;
goto err_out_release;
}
}
else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) {
dev_err(&pdev->dev, "System does not support DMA, aborting.\n");
rc = -EIO;
goto err_out_release;
}
bp->dev = dev;
bp->pdev = pdev;
@ -5805,6 +5791,26 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
}
}
/* 5708 cannot support DMA addresses > 40-bit. */
if (CHIP_NUM(bp) == CHIP_NUM_5708)
persist_dma_mask = dma_mask = DMA_40BIT_MASK;
else
persist_dma_mask = dma_mask = DMA_64BIT_MASK;
/* Configure DMA attributes. */
if (pci_set_dma_mask(pdev, dma_mask) == 0) {
dev->features |= NETIF_F_HIGHDMA;
rc = pci_set_consistent_dma_mask(pdev, persist_dma_mask);
if (rc) {
dev_err(&pdev->dev,
"pci_set_consistent_dma_mask failed, aborting.\n");
goto err_out_unmap;
}
} else if ((rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) {
dev_err(&pdev->dev, "System does not support DMA, aborting.\n");
goto err_out_unmap;
}
/* Get bus information. */
reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS);
if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) {
@ -6114,8 +6120,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
printk("\n");
dev->features |= NETIF_F_SG;
if (bp->flags & USING_DAC_FLAG)
dev->features |= NETIF_F_HIGHDMA;
dev->features |= NETIF_F_IP_CSUM;
#ifdef BCM_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;

1
drivers/net/bnx2.h
View File

@ -6433,7 +6433,6 @@ struct bnx2 {
#define PCI_32BIT_FLAG 2
#define ONE_TDMA_FLAG 4 /* no longer used */
#define NO_WOL_FLAG 8
#define USING_DAC_FLAG 0x10
#define USING_MSI_FLAG 0x20
#define ASF_ENABLE_FLAG 0x40