mfd: rtsx: Add support for rts525A
Add support for new chip rts525A. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
parent
663c425f2c
commit
41bc233473
|
@ -487,3 +487,106 @@ void rts524a_init_params(struct rtsx_pcr *pcr)
|
|||
pcr->ops = &rts524a_pcr_ops;
|
||||
}
|
||||
|
||||
static int rts525a_card_power_on(struct rtsx_pcr *pcr, int card)
|
||||
{
|
||||
rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
|
||||
LDO_VCC_TUNE_MASK, LDO_VCC_3V3);
|
||||
return rtsx_base_card_power_on(pcr, card);
|
||||
}
|
||||
|
||||
static int rts525a_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
|
||||
{
|
||||
switch (voltage) {
|
||||
case OUTPUT_3V3:
|
||||
rtsx_pci_write_register(pcr, LDO_CONFIG2,
|
||||
LDO_D3318_MASK, LDO_D3318_33V);
|
||||
rtsx_pci_write_register(pcr, SD_PAD_CTL, SD_IO_USING_1V8, 0);
|
||||
break;
|
||||
case OUTPUT_1V8:
|
||||
rtsx_pci_write_register(pcr, LDO_CONFIG2,
|
||||
LDO_D3318_MASK, LDO_D3318_18V);
|
||||
rtsx_pci_write_register(pcr, SD_PAD_CTL, SD_IO_USING_1V8,
|
||||
SD_IO_USING_1V8);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
rtsx_pci_init_cmd(pcr);
|
||||
rts5249_fill_driving(pcr, voltage);
|
||||
return rtsx_pci_send_cmd(pcr, 100);
|
||||
}
|
||||
|
||||
static int rts525a_optimize_phy(struct rtsx_pcr *pcr)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
|
||||
D3_DELINK_MODE_EN, 0x00);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
rtsx_pci_write_phy_register(pcr, _PHY_FLD0,
|
||||
_PHY_FLD0_CLK_REQ_20C | _PHY_FLD0_RX_IDLE_EN |
|
||||
_PHY_FLD0_BIT_ERR_RSTN | _PHY_FLD0_BER_COUNT |
|
||||
_PHY_FLD0_BER_TIMER | _PHY_FLD0_CHECK_EN);
|
||||
|
||||
rtsx_pci_write_phy_register(pcr, _PHY_ANA03,
|
||||
_PHY_ANA03_TIMER_MAX | _PHY_ANA03_OOBS_DEB_EN |
|
||||
_PHY_CMU_DEBUG_EN);
|
||||
|
||||
if (is_version(pcr, 0x525A, IC_VER_A))
|
||||
rtsx_pci_write_phy_register(pcr, _PHY_REV0,
|
||||
_PHY_REV0_FILTER_OUT | _PHY_REV0_CDR_BYPASS_PFD |
|
||||
_PHY_REV0_CDR_RX_IDLE_BYPASS);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rts525a_extra_init_hw(struct rtsx_pcr *pcr)
|
||||
{
|
||||
rts5249_extra_init_hw(pcr);
|
||||
|
||||
rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);
|
||||
if (is_version(pcr, 0x525A, IC_VER_A)) {
|
||||
rtsx_pci_write_register(pcr, L1SUB_CONFIG2,
|
||||
L1SUB_AUTO_CFG, L1SUB_AUTO_CFG);
|
||||
rtsx_pci_write_register(pcr, RREF_CFG,
|
||||
RREF_VBGSEL_MASK, RREF_VBGSEL_1V25);
|
||||
rtsx_pci_write_register(pcr, LDO_VIO_CFG,
|
||||
LDO_VIO_TUNE_MASK, LDO_VIO_1V7);
|
||||
rtsx_pci_write_register(pcr, LDO_DV12S_CFG,
|
||||
LDO_D12_TUNE_MASK, LDO_D12_TUNE_DF);
|
||||
rtsx_pci_write_register(pcr, LDO_AV12S_CFG,
|
||||
LDO_AV12S_TUNE_MASK, LDO_AV12S_TUNE_DF);
|
||||
rtsx_pci_write_register(pcr, LDO_VCC_CFG0,
|
||||
LDO_VCC_LMTVTH_MASK, LDO_VCC_LMTVTH_2A);
|
||||
rtsx_pci_write_register(pcr, OOBS_CONFIG,
|
||||
OOBS_AUTOK_DIS | OOBS_VAL_MASK, 0x89);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pcr_ops rts525a_pcr_ops = {
|
||||
.fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
|
||||
.extra_init_hw = rts525a_extra_init_hw,
|
||||
.optimize_phy = rts525a_optimize_phy,
|
||||
.turn_on_led = rtsx_base_turn_on_led,
|
||||
.turn_off_led = rtsx_base_turn_off_led,
|
||||
.enable_auto_blink = rtsx_base_enable_auto_blink,
|
||||
.disable_auto_blink = rtsx_base_disable_auto_blink,
|
||||
.card_power_on = rts525a_card_power_on,
|
||||
.card_power_off = rtsx_base_card_power_off,
|
||||
.switch_output_voltage = rts525a_switch_output_voltage,
|
||||
.force_power_down = rtsx_base_force_power_down,
|
||||
};
|
||||
|
||||
void rts525a_init_params(struct rtsx_pcr *pcr)
|
||||
{
|
||||
rts5249_init_params(pcr);
|
||||
|
||||
pcr->reg_pm_ctrl3 = RTS524A_PM_CTRL3;
|
||||
pcr->ops = &rts525a_pcr_ops;
|
||||
}
|
||||
|
||||
|
|
|
@ -59,6 +59,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
|
|||
{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
|
||||
{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
|
||||
{ PCI_DEVICE(0x10EC, 0x524A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
|
||||
{ PCI_DEVICE(0x10EC, 0x525A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
|
||||
{ 0, }
|
||||
};
|
||||
|
||||
|
@ -1114,6 +1115,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
|
|||
rts524a_init_params(pcr);
|
||||
break;
|
||||
|
||||
case 0x525A:
|
||||
rts525a_init_params(pcr);
|
||||
break;
|
||||
|
||||
case 0x5287:
|
||||
rtl8411b_init_params(pcr);
|
||||
break;
|
||||
|
@ -1159,7 +1164,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
|
|||
struct rtsx_pcr *pcr;
|
||||
struct pcr_handle *handle;
|
||||
u32 base, len;
|
||||
int ret, i;
|
||||
int ret, i, bar = 0;
|
||||
|
||||
dev_dbg(&(pcidev->dev),
|
||||
": Realtek PCI-E Card Reader found at %s [%04x:%04x] (rev %x)\n",
|
||||
|
@ -1204,8 +1209,10 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
|
|||
pcr->pci = pcidev;
|
||||
dev_set_drvdata(&pcidev->dev, handle);
|
||||
|
||||
len = pci_resource_len(pcidev, 0);
|
||||
base = pci_resource_start(pcidev, 0);
|
||||
if (CHK_PCI_PID(pcr, 0x525A))
|
||||
bar = 1;
|
||||
len = pci_resource_len(pcidev, bar);
|
||||
base = pci_resource_start(pcidev, bar);
|
||||
pcr->remap_addr = ioremap_nocache(base, len);
|
||||
if (!pcr->remap_addr) {
|
||||
ret = -ENOMEM;
|
||||
|
|
|
@ -40,6 +40,7 @@ void rtl8402_init_params(struct rtsx_pcr *pcr);
|
|||
void rts5227_init_params(struct rtsx_pcr *pcr);
|
||||
void rts5249_init_params(struct rtsx_pcr *pcr);
|
||||
void rts524a_init_params(struct rtsx_pcr *pcr);
|
||||
void rts525a_init_params(struct rtsx_pcr *pcr);
|
||||
void rtl8411b_init_params(struct rtsx_pcr *pcr);
|
||||
|
||||
static inline u8 map_sd_drive(int idx)
|
||||
|
|
|
@ -727,6 +727,10 @@
|
|||
#define PHY_SSCCR3 0x03
|
||||
#define PHY_SSCCR3_STEP_IN 0x2740
|
||||
#define PHY_SSCCR3_CHECK_DELAY 0x0008
|
||||
#define _PHY_ANA03 0x03
|
||||
#define _PHY_ANA03_TIMER_MAX 0x2700
|
||||
#define _PHY_ANA03_OOBS_DEB_EN 0x0040
|
||||
#define _PHY_CMU_DEBUG_EN 0x0008
|
||||
|
||||
#define PHY_RTCR 0x04
|
||||
#define PHY_RDR 0x05
|
||||
|
@ -785,6 +789,10 @@
|
|||
#define PHY_REV_STOP_CLKRD 0x0020
|
||||
#define PHY_REV_RX_PWST 0x0008
|
||||
#define PHY_REV_STOP_CLKWR 0x0004
|
||||
#define _PHY_REV0 0x19
|
||||
#define _PHY_REV0_FILTER_OUT 0x3800
|
||||
#define _PHY_REV0_CDR_BYPASS_PFD 0x0100
|
||||
#define _PHY_REV0_CDR_RX_IDLE_BYPASS 0x0002
|
||||
|
||||
#define PHY_FLD0 0x1A
|
||||
#define PHY_ANA1A 0x1A
|
||||
|
@ -800,6 +808,13 @@
|
|||
#define PHY_FLD3_RXDELINK 0x0004
|
||||
#define PHY_ANA1D 0x1D
|
||||
#define PHY_ANA1D_DEBUG_ADDR 0x0004
|
||||
#define _PHY_FLD0 0x1D
|
||||
#define _PHY_FLD0_CLK_REQ_20C 0x8000
|
||||
#define _PHY_FLD0_RX_IDLE_EN 0x1000
|
||||
#define _PHY_FLD0_BIT_ERR_RSTN 0x0800
|
||||
#define _PHY_FLD0_BER_COUNT 0x01E0
|
||||
#define _PHY_FLD0_BER_TIMER 0x001E
|
||||
#define _PHY_FLD0_CHECK_EN 0x0001
|
||||
|
||||
#define PHY_FLD4 0x1E
|
||||
#define PHY_FLD4_FLDEN_SEL 0x4000
|
||||
|
|
Loading…
Reference in New Issue