diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 483da1660eae..76c255fcdc2d 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -80,11 +80,11 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
 	.mode = STEDMA40_MODE_PHYSICAL,
 	.dir = DMA_MEM_TO_MEM,
 
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 	.src_info.psize = STEDMA40_PSIZE_PHY_1,
 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 };
@@ -94,11 +94,11 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = DMA_MEM_TO_MEM,
 
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 	.src_info.psize = STEDMA40_PSIZE_LOG_1,
 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 };
@@ -1005,20 +1005,21 @@ static int d40_psize_2_burst_size(bool is_log, int psize)
 
 /*
  * The dma only supports transmitting packages up to
- * STEDMA40_MAX_SEG_SIZE << data_width. Calculate the total number of
- * dma elements required to send the entire sg list
+ * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
+ *
+ * Calculate the total number of dma elements required to send the entire sg list.
  */
 static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
 {
 	int dmalen;
 	u32 max_w = max(data_width1, data_width2);
 	u32 min_w = min(data_width1, data_width2);
-	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
 
 	if (seg_max > STEDMA40_MAX_SEG_SIZE)
-		seg_max -= (1 << max_w);
+		seg_max -= max_w;
 
-	if (!IS_ALIGNED(size, 1 << max_w))
+	if (!IS_ALIGNED(size, max_w))
 		return -EINVAL;
 
 	if (size <= seg_max)
@@ -1464,7 +1465,7 @@ static u32 d40_residue(struct d40_chan *d40c)
 			  >> D40_SREG_ELEM_PHY_ECNT_POS;
 	}
 
-	return num_elt * (1 << d40c->dma_cfg.dst_info.data_width);
+	return num_elt * d40c->dma_cfg.dst_info.data_width;
 }
 
 static bool d40_tx_is_linked(struct d40_chan *d40c)
@@ -1784,9 +1785,9 @@ static int d40_validate_conf(struct d40_chan *d40c,
 	}
 
 	if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
-	    (1 << conf->src_info.data_width) !=
+	    conf->src_info.data_width !=
 	    d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
-	    (1 << conf->dst_info.data_width)) {
+	    conf->dst_info.data_width) {
 		/*
 		 * The DMAC hardware only supports
 		 * src (burst x width) == dst (burst x width)
@@ -2673,33 +2674,10 @@ static void d40_terminate_all(struct dma_chan *chan)
 static int
 dma40_config_to_halfchannel(struct d40_chan *d40c,
 			    struct stedma40_half_channel_info *info,
-			    enum dma_slave_buswidth width,
 			    u32 maxburst)
 {
-	enum stedma40_periph_data_width addr_width;
 	int psize;
 
-	switch (width) {
-	case DMA_SLAVE_BUSWIDTH_1_BYTE:
-		addr_width = STEDMA40_BYTE_WIDTH;
-		break;
-	case DMA_SLAVE_BUSWIDTH_2_BYTES:
-		addr_width = STEDMA40_HALFWORD_WIDTH;
-		break;
-	case DMA_SLAVE_BUSWIDTH_4_BYTES:
-		addr_width = STEDMA40_WORD_WIDTH;
-		break;
-	case DMA_SLAVE_BUSWIDTH_8_BYTES:
-		addr_width = STEDMA40_DOUBLEWORD_WIDTH;
-		break;
-	default:
-		dev_err(d40c->base->dev,
-			"illegal peripheral address width "
-			"requested (%d)\n",
-			width);
-		return -EINVAL;
-	}
-
 	if (chan_is_logical(d40c)) {
 		if (maxburst >= 16)
 			psize = STEDMA40_PSIZE_LOG_16;
@@ -2720,7 +2698,6 @@ dma40_config_to_halfchannel(struct d40_chan *d40c,
 			psize = STEDMA40_PSIZE_PHY_1;
 	}
 
-	info->data_width = addr_width;
 	info->psize = psize;
 	info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
 
@@ -2804,14 +2781,24 @@ static int d40_set_runtime_config(struct dma_chan *chan,
 		src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
 	}
 
+	/* Only valid widths are; 1, 2, 4 and 8. */
+	if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
+	    src_addr_width >  DMA_SLAVE_BUSWIDTH_8_BYTES   ||
+	    dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
+	    dst_addr_width >  DMA_SLAVE_BUSWIDTH_8_BYTES   ||
+	    ((src_addr_width > 1) && (src_addr_width & 1)) ||
+	    ((dst_addr_width > 1) && (dst_addr_width & 1)))
+		return -EINVAL;
+
+	cfg->src_info.data_width = src_addr_width;
+	cfg->dst_info.data_width = dst_addr_width;
+
 	ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
-					  src_addr_width,
 					  src_maxburst);
 	if (ret)
 		return ret;
 
 	ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
-					  dst_addr_width,
 					  dst_maxburst);
 	if (ret)
 		return ret;
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index 5ddd724dcdc5..a035dfeab6cb 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -10,6 +10,18 @@
 
 #include "ste_dma40_ll.h"
 
+u8 d40_width_to_bits(enum dma_slave_buswidth width)
+{
+	if (width == DMA_SLAVE_BUSWIDTH_1_BYTE)
+		return STEDMA40_ESIZE_8_BIT;
+	else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
+		return STEDMA40_ESIZE_16_BIT;
+	else if (width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+		return STEDMA40_ESIZE_64_BIT;
+	else
+		return STEDMA40_ESIZE_32_BIT;
+}
+
 /* Sets up proper LCSP1 and LCSP3 register for a logical channel */
 void d40_log_cfg(struct stedma40_chan_cfg *cfg,
 		 u32 *lcsp1, u32 *lcsp3)
@@ -39,11 +51,13 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
 
 	l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS);
 	l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS;
-	l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS;
+	l3 |= d40_width_to_bits(cfg->dst_info.data_width)
+		<< D40_MEM_LCSP3_DCFG_ESIZE_POS;
 
 	l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS);
 	l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
-	l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS;
+	l1 |= d40_width_to_bits(cfg->src_info.data_width)
+		<< D40_MEM_LCSP1_SCFG_ESIZE_POS;
 
 	*lcsp1 = l1;
 	*lcsp3 = l3;
@@ -95,8 +109,10 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
 	}
 
 	/* Element size */
-	src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
-	dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
+	src |= d40_width_to_bits(cfg->src_info.data_width)
+		<< D40_SREG_CFG_ESIZE_POS;
+	dst |= d40_width_to_bits(cfg->dst_info.data_width)
+		<< D40_SREG_CFG_ESIZE_POS;
 
 	/* Set the priority bit to high for the physical channel */
 	if (cfg->high_priority) {
@@ -133,23 +149,22 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
 		num_elems = 2 << psize;
 
 	/* Must be aligned */
-	if (!IS_ALIGNED(data, 0x1 << data_width))
+	if (!IS_ALIGNED(data, data_width))
 		return -EINVAL;
 
 	/* Transfer size can't be smaller than (num_elms * elem_size) */
-	if (data_size < num_elems * (0x1 << data_width))
+	if (data_size < num_elems * data_width)
 		return -EINVAL;
 
 	/* The number of elements. IE now many chunks */
-	lli->reg_elt = (data_size >> data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
+	lli->reg_elt = (data_size / data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
 
 	/*
 	 * Distance to next element sized entry.
 	 * Usually the size of the element unless you want gaps.
 	 */
 	if (addr_inc)
-		lli->reg_elt |= (0x1 << data_width) <<
-			D40_SREG_ELEM_PHY_EIDX_POS;
+		lli->reg_elt |= data_width << D40_SREG_ELEM_PHY_EIDX_POS;
 
 	/* Where the data is */
 	lli->reg_ptr = data;
@@ -177,16 +192,16 @@ static int d40_seg_size(int size, int data_width1, int data_width2)
 {
 	u32 max_w = max(data_width1, data_width2);
 	u32 min_w = min(data_width1, data_width2);
-	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
 
 	if (seg_max > STEDMA40_MAX_SEG_SIZE)
-		seg_max -= (1 << max_w);
+		seg_max -= max_w;
 
 	if (size <= seg_max)
 		return size;
 
 	if (size <= 2 * seg_max)
-		return ALIGN(size / 2, 1 << max_w);
+		return ALIGN(size / 2, max_w);
 
 	return seg_max;
 }
@@ -352,10 +367,10 @@ static void d40_log_fill_lli(struct d40_log_lli *lli,
 	lli->lcsp13 = reg_cfg;
 
 	/* The number of elements to transfer */
-	lli->lcsp02 = ((data_size >> data_width) <<
+	lli->lcsp02 = ((data_size / data_width) <<
 		       D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK;
 
-	BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE);
+	BUG_ON((data_size / data_width) > STEDMA40_MAX_SEG_SIZE);
 
 	/* 16 LSBs address of the current element */
 	lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK;
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index 54ddca615cb4..ceba6dc566a9 100644
--- a/include/linux/platform_data/dma-ste-dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -70,13 +70,6 @@ enum stedma40_flow_ctrl {
 	STEDMA40_FLOW_CTRL,
 };
 
-enum stedma40_periph_data_width {
-	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
-	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
-	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
-	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
 /**
  * struct stedma40_half_channel_info - dst/src channel configuration
  *
@@ -87,7 +80,7 @@ enum stedma40_periph_data_width {
  */
 struct stedma40_half_channel_info {
 	bool big_endian;
-	enum stedma40_periph_data_width data_width;
+	enum dma_slave_buswidth data_width;
 	int psize;
 	enum stedma40_flow_ctrl flow_ctrl;
 };
diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c
index b6e5ae277299..31f9bbc74521 100644
--- a/sound/soc/ux500/ux500_pcm.c
+++ b/sound/soc/ux500/ux500_pcm.c
@@ -76,20 +76,20 @@ static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
 	dma_params = snd_soc_dai_get_dma_data(dai, substream);
 	dma_cfg = dma_params->dma_cfg;
 
-	mem_data_width = STEDMA40_HALFWORD_WIDTH;
+	mem_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 
 	switch (dma_params->data_size) {
 	case 32:
-		per_data_width = STEDMA40_WORD_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		break;
 	case 16:
-		per_data_width = STEDMA40_HALFWORD_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		break;
 	case 8:
-		per_data_width = STEDMA40_BYTE_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 		break;
 	default:
-		per_data_width = STEDMA40_WORD_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	}
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {