x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag

It appears that the BayTrail-T class of hardware requires EFI in order
to powerdown and reboot and no other reliable method exists.

This quirk is generally applicable to all hardware that has the ACPI
Hardware Reduced bit set, since usually ACPI would be the preferred
method.

Cc: Len Brown <len.brown@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

arch/x86/include/asm/efi.h

@@ -183,6 +183,8 @@ extern struct efi_config *efi_early;
 #define efi_call_early(f, ...)						\
 	efi_early->call(efi_early->f, __VA_ARGS__);
 
+extern bool efi_reboot_required(void);
+
 #else
 /*
  * IF EFI is not configured, have the EFI calls return -ENOSYS.
@@ -195,6 +197,10 @@ extern struct efi_config *efi_early;
 #define efi_call5(_f, _a1, _a2, _a3, _a4, _a5)		(-ENOSYS)
 #define efi_call6(_f, _a1, _a2, _a3, _a4, _a5, _a6)	(-ENOSYS)
 static inline void parse_efi_setup(u64 phys_addr, u32 data_len) {}
+static inline bool efi_reboot_required(void)
+{
+	return false;
+}
 #endif /* CONFIG_EFI */
 
 #endif /* _ASM_X86_EFI_H */

arch/x86/kernel/reboot.c

@@ -28,6 +28,7 @@
 #include <linux/mc146818rtc.h>
 #include <asm/realmode.h>
 #include <asm/x86_init.h>
+#include <asm/efi.h>
 
 /*
  * Power off function, if any
@@ -401,12 +402,25 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 
 static int __init reboot_init(void)
 {
+	int rv;
+
 	/*
 	 * Only do the DMI check if reboot_type hasn't been overridden
 	 * on the command line
 	 */
-	if (reboot_default)
-		dmi_check_system(reboot_dmi_table);
+	if (!reboot_default)
+		return 0;
+
+	/*
+	 * The DMI quirks table takes precedence. If no quirks entry
+	 * matches and the ACPI Hardware Reduced bit is set, force EFI
+	 * reboot.
+	 */
+	rv = dmi_check_system(reboot_dmi_table);
+
+	if (!rv && efi_reboot_required())
+		reboot_type = BOOT_EFI;
+
 	return 0;
 }
 core_initcall(reboot_init);

arch/x86/platform/efi/quirks.c

@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <linux/memblock.h>
 #include <linux/bootmem.h>
+#include <linux/acpi.h>
 #include <asm/efi.h>
 #include <asm/uv/uv.h>
 
@@ -265,3 +266,25 @@ void __init efi_apply_memmap_quirks(void)
 	if (is_uv_system())
 		set_bit(EFI_OLD_MEMMAP, &efi.flags);
 }
+
+/*
+ * For most modern platforms the preferred method of powering off is via
+ * ACPI. However, there are some that are known to require the use of
+ * EFI runtime services and for which ACPI does not work at all.
+ *
+ * Using EFI is a last resort, to be used only if no other option
+ * exists.
+ */
+bool efi_reboot_required(void)
+{
+	if (!acpi_gbl_reduced_hardware)
+		return false;
+
+	efi_reboot_quirk_mode = EFI_RESET_WARM;
+	return true;
+}
+
+bool efi_poweroff_required(void)
+{
+	return !!acpi_gbl_reduced_hardware;
+}

drivers/firmware/efi/reboot.c

@@ -5,6 +5,8 @@
 #include <linux/efi.h>
 #include <linux/reboot.h>
 
+int efi_reboot_quirk_mode = -1;
+
 void efi_reboot(enum reboot_mode reboot_mode, const char *__unused)
 {
 	int efi_mode;
@@ -22,6 +24,12 @@ void efi_reboot(enum reboot_mode reboot_mode, const char *__unused)
 		break;
 	}
 
+	/*
+	 * If a quirk forced an EFI reset mode, always use that.
+	 */
+	if (efi_reboot_quirk_mode != -1)
+		efi_mode = efi_reboot_quirk_mode;
+
 	efi.reset_system(efi_mode, EFI_SUCCESS, 0, NULL);
 }
 

include/linux/efi.h

@@ -878,6 +878,7 @@ extern void efi_reserve_boot_services(void);
 extern int efi_get_fdt_params(struct efi_fdt_params *params, int verbose);
 extern struct efi_memory_map memmap;
 
+extern int efi_reboot_quirk_mode;
 extern bool efi_poweroff_required(void);
 
 /* Iterate through an efi_memory_map */