From fa84d7310d19e0b77979019df82e357b1e8443e3 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 4 Jan 2017 12:02:44 -0800 Subject: [PATCH 01/10] ARC: mmu: clarify the MMUv3 programming model Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index ec86ac0e3321..6d98e1d57a18 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -271,7 +271,11 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr, /* * For ARC700 MMUv3 I-cache and D-cache flushes - * Also reused for HS38 aliasing I-cache configuration + * - ARC700 programming model requires paddr and vaddr be passed in seperate + * AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the + * caches actually alias or not. + * - For HS38, only the aliasing I-cache configuration uses the PTAG reg + * (non aliasing I-cache version doesn't; while D-cache can't possibly alias) */ static inline void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, From 2163266c2704aa44211b6b61924a0fa570fe0d4b Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Wed, 28 Dec 2016 11:46:24 +0300 Subject: [PATCH 02/10] ARC: IRQ: Use hwirq instead of virq in mask/unmask It is necessary to use hwirq instead of virq when you communicate with an interrupt controller since there is no guaranty that virq numbers match hwirq numbers. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta --- arch/arc/kernel/intc-arcv2.c | 6 +++--- arch/arc/kernel/intc-compact.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 994dca7014db..ecef0fb0b66c 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -77,20 +77,20 @@ void arc_init_IRQ(void) static void arcv2_irq_mask(struct irq_data *data) { - write_aux_reg(AUX_IRQ_SELECT, data->irq); + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); write_aux_reg(AUX_IRQ_ENABLE, 0); } static void arcv2_irq_unmask(struct irq_data *data) { - write_aux_reg(AUX_IRQ_SELECT, data->irq); + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); write_aux_reg(AUX_IRQ_ENABLE, 1); } void arcv2_irq_enable(struct irq_data *data) { /* set default priority */ - write_aux_reg(AUX_IRQ_SELECT, data->irq); + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO); /* diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c index ce9deb953ca9..8c1fd5c00782 100644 --- a/arch/arc/kernel/intc-compact.c +++ b/arch/arc/kernel/intc-compact.c @@ -57,7 +57,7 @@ static void arc_irq_mask(struct irq_data *data) unsigned int ienb; ienb = read_aux_reg(AUX_IENABLE); - ienb &= ~(1 << data->irq); + ienb &= ~(1 << data->hwirq); write_aux_reg(AUX_IENABLE, ienb); } @@ -66,7 +66,7 @@ static void arc_irq_unmask(struct irq_data *data) unsigned int ienb; ienb = read_aux_reg(AUX_IENABLE); - ienb |= (1 << data->irq); + ienb |= (1 << data->hwirq); write_aux_reg(AUX_IENABLE, ienb); } From e51d5d02f688c45b6f644f472f0c80fdfa73f0cb Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Wed, 28 Dec 2016 11:46:25 +0300 Subject: [PATCH 03/10] ARCv2: IRQ: Call entry/exit functions for chained handlers in MCIP It is necessary to call entry/exit functions for parent interrupt controllers for proper masking/unmasking of interrupt lines. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta --- arch/arc/kernel/mcip.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 560c4afc2af4..9274f8ade8c7 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -221,10 +222,13 @@ static irq_hw_number_t idu_first_hwirq; static void idu_cascade_isr(struct irq_desc *desc) { struct irq_domain *idu_domain = irq_desc_get_handler_data(desc); + struct irq_chip *core_chip = irq_desc_get_chip(desc); irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc)); irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq; + chained_irq_enter(core_chip, desc); generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq)); + chained_irq_exit(core_chip, desc); } static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) From ecd43afdbe72017aefe48080631eb625e177ef4d Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 8 Jan 2017 19:45:48 -0800 Subject: [PATCH 04/10] ARCv2: save r30 on kernel entry as gcc uses it for code-gen This is not exposed to userspace debugers yet, which can be done independently as a seperate patch ! Signed-off-by: Vineet Gupta --- arch/arc/include/asm/entry-arcv2.h | 2 ++ arch/arc/include/asm/ptrace.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h index b5ff87e6f4b7..aee1a77934cf 100644 --- a/arch/arc/include/asm/entry-arcv2.h +++ b/arch/arc/include/asm/entry-arcv2.h @@ -16,6 +16,7 @@ ; ; Now manually save: r12, sp, fp, gp, r25 + PUSH r30 PUSH r12 ; Saving pt_regs->sp correctly requires some extra work due to the way @@ -72,6 +73,7 @@ POPAX AUX_USER_SP 1: POP r12 + POP r30 .endm diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h index 69095da1fcfd..47111d565a95 100644 --- a/arch/arc/include/asm/ptrace.h +++ b/arch/arc/include/asm/ptrace.h @@ -84,7 +84,7 @@ struct pt_regs { unsigned long fp; unsigned long sp; /* user/kernel sp depending on where we came from */ - unsigned long r12; + unsigned long r12, r30; /*------- Below list auto saved by h/w -----------*/ unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11; From eb1357d942e5d96de6b4c20a8ffa55acf96233a2 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 16 Jan 2017 10:48:09 -0800 Subject: [PATCH 05/10] ARC: module: Fix !CONFIG_ARC_DW2_UNWIND builds commit d65283f7b695b5 added mod->arch.secstr under CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds when the option was disabled. Fix that by adjusting the #ifdef guard. And while at it add a missing guard (for unwinder) in module.c as well Reported-by: Waldemar Brodkorb Cc: stable@vger.kernel.org #4.9 Fixes: d65283f7b695b5 ("ARC: module: elide loop to save reference to .eh_frame") Tested-by: Anton Kolesov Reviewed-by: Alexey Brodkin [abrodkin: provided fixlet to Kconfig per failure in allnoconfig build] Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 2 +- arch/arc/include/asm/module.h | 4 ++-- arch/arc/kernel/module.c | 4 +++- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index c75d29077e4a..283099c9560a 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -29,7 +29,7 @@ config ARC select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_MEMBLOCK - select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND + select HAVE_MOD_ARCH_SPECIFIC select HAVE_OPROFILE select HAVE_PERF_EVENTS select HANDLE_DOMAIN_IRQ diff --git a/arch/arc/include/asm/module.h b/arch/arc/include/asm/module.h index 6e91d8b339c3..567590ea8f6c 100644 --- a/arch/arc/include/asm/module.h +++ b/arch/arc/include/asm/module.h @@ -14,13 +14,13 @@ #include -#ifdef CONFIG_ARC_DW2_UNWIND struct mod_arch_specific { +#ifdef CONFIG_ARC_DW2_UNWIND void *unw_info; int unw_sec_idx; +#endif const char *secstr; }; -#endif #define MODULE_PROC_FAMILY "ARC700" diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c index 42e964db2967..3d99a6091332 100644 --- a/arch/arc/kernel/module.c +++ b/arch/arc/kernel/module.c @@ -32,8 +32,8 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, #ifdef CONFIG_ARC_DW2_UNWIND mod->arch.unw_sec_idx = 0; mod->arch.unw_info = NULL; - mod->arch.secstr = secstr; #endif + mod->arch.secstr = secstr; return 0; } @@ -113,8 +113,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, } +#ifdef CONFIG_ARC_DW2_UNWIND if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0) module->arch.unw_sec_idx = tgtsec; +#endif return 0; From d4911cdd3270da45d3a1c55bf28e88a932bbba7b Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 Jun 2016 15:43:22 +0530 Subject: [PATCH 06/10] ARCv2: IOC: refactor the IOC and SLC operations into own functions - Move IOC setup into arc_ioc_setup() - Move SLC disabling into arc_slc_disable() Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cache.h | 2 +- arch/arc/mm/cache.c | 68 +++++++++++++++++++++++++----------- 2 files changed, 48 insertions(+), 22 deletions(-) diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index b3410ff6a62d..5f924a1024fa 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -92,8 +92,8 @@ extern unsigned long perip_base, perip_end; #define ARC_REG_SLC_RGN_END 0x916 /* Bit val in SLC_CONTROL */ +#define SLC_CTRL_DIS 0x001 #define SLC_CTRL_IM 0x040 -#define SLC_CTRL_DISABLE 0x001 #define SLC_CTRL_BUSY 0x100 #define SLC_CTRL_RGN_OP_INV 0x200 diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 6d98e1d57a18..2c36370a1689 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -601,6 +601,40 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) #endif } +noinline static void slc_entire_op(const int op) +{ + unsigned int ctrl, r = ARC_REG_SLC_CTRL; + + ctrl = read_aux_reg(r); + + if (!(op & OP_FLUSH)) /* i.e. OP_INV */ + ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ + else + ctrl |= SLC_CTRL_IM; + + write_aux_reg(r, ctrl); + + write_aux_reg(ARC_REG_SLC_INVALIDATE, 1); + + /* Important to wait for flush to complete */ + while (read_aux_reg(r) & SLC_CTRL_BUSY); +} + +static inline void arc_slc_disable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + slc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS); +} + +static inline void arc_slc_enable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS); +} + /*********************************************************** * Exported APIs */ @@ -927,6 +961,14 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) return 0; } +noinline void arc_ioc_setup(void) +{ + write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); + write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); + write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); + write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); +} + void arc_cache_init(void) { unsigned int __maybe_unused cpu = smp_processor_id(); @@ -989,30 +1031,14 @@ void arc_cache_init(void) } } - if (is_isa_arcv2() && l2_line_sz && !slc_enable) { + /* Note that SLC disable not formally supported till HS 3.0 */ + if (is_isa_arcv2() && l2_line_sz && !slc_enable) + arc_slc_disable(); - /* IM set : flush before invalidate */ - write_aux_reg(ARC_REG_SLC_CTRL, - read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM); - - write_aux_reg(ARC_REG_SLC_INVALIDATE, 1); - - /* Important to wait for flush to complete */ - while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); - write_aux_reg(ARC_REG_SLC_CTRL, - read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE); - } + if (is_isa_arcv2() && ioc_enable) + arc_ioc_setup(); if (is_isa_arcv2() && ioc_enable) { - /* IO coherency base - 0x8z */ - write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); - /* IO coherency aperture size - 512Mb: 0x8z-0xAz */ - write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); - /* Enable partial writes */ - write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); - /* Enable IO coherency */ - write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); - __dma_cache_wback_inv = __dma_cache_wback_inv_ioc; __dma_cache_inv = __dma_cache_inv_ioc; __dma_cache_wback = __dma_cache_wback_ioc; From 8c47f83ba45928ce9495fcf1b29e828c28e3c839 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 Jun 2016 16:01:19 +0530 Subject: [PATCH 07/10] ARCv2: IOC: Adhere to progamming model guidelines to avoid DMA corruption On AXS103 release bitfiles, DMA data corruptions were seen because IOC setup was not following the recommended way in documentation. Flipping IOC on when caches are enabled or coherency transactions are in flight, might cause some of the memory operations to not observe coherency as expected. So strictly follow the programming model recommendations as documented in comment header above arc_ioc_setup() Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cache.h | 7 +++--- arch/arc/mm/cache.c | 46 ++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 3 deletions(-) diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 5f924a1024fa..5008021fba98 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -67,7 +67,7 @@ extern unsigned long perip_base, perip_end; #define ARC_REG_IC_PTAG_HI 0x1F /* Bit val in IC_CTRL */ -#define IC_CTRL_CACHE_DISABLE 0x1 +#define IC_CTRL_DIS 0x1 /* Data cache related Auxiliary registers */ #define ARC_REG_DC_BCR 0x72 /* Build Config reg */ @@ -80,8 +80,9 @@ extern unsigned long perip_base, perip_end; #define ARC_REG_DC_PTAG_HI 0x5F /* Bit val in DC_CTRL */ -#define DC_CTRL_INV_MODE_FLUSH 0x40 -#define DC_CTRL_FLUSH_STATUS 0x100 +#define DC_CTRL_DIS 0x001 +#define DC_CTRL_INV_MODE_FLUSH 0x040 +#define DC_CTRL_FLUSH_STATUS 0x100 /*System-level cache (L2 cache) related Auxiliary registers */ #define ARC_REG_SLC_CFG 0x901 diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 2c36370a1689..1b4cda10844a 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -462,6 +462,21 @@ static inline void __dc_entire_op(const int op) __after_dc_op(op); } +static inline void __dc_disable(void) +{ + const int r = ARC_REG_DC_CTRL; + + __dc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS); +} + +static void __dc_enable(void) +{ + const int r = ARC_REG_DC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS); +} + /* For kernel mappings cache operation: index is same as paddr */ #define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) @@ -487,6 +502,8 @@ static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr, #else #define __dc_entire_op(op) +#define __dc_disable() +#define __dc_enable() #define __dc_line_op(paddr, vaddr, sz, op) #define __dc_line_op_k(paddr, sz, op) @@ -961,12 +978,41 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) return 0; } +/* + * IO-Coherency (IOC) setup rules: + * + * 1. Needs to be at system level, so only once by Master core + * Non-Masters need not be accessing caches at that time + * - They are either HALT_ON_RESET and kick started much later or + * - if run on reset, need to ensure that arc_platform_smp_wait_to_boot() + * doesn't perturb caches or coherency unit + * + * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC, + * otherwise any straggler data might behave strangely post IOC enabling + * + * 3. All Caches need to be disabled when setting up IOC to elide any in-flight + * Coherency transactions + */ noinline void arc_ioc_setup(void) { + /* Flush + invalidate + disable L1 dcache */ + __dc_disable(); + + /* Flush + invalidate SLC */ + if (read_aux_reg(ARC_REG_SLC_BCR)) + slc_entire_op(OP_FLUSH_N_INV); + + /* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */ write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); + + /* IOC Aperture size: TBD: handle different mem sizes, PAE... */ write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); + write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); + + /* Re-enable L1 dcache */ + __dc_enable(); } void arc_cache_init(void) From e497c8e52a83ebb5309ab41c8851c9cb53f28b73 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 18 Jan 2017 12:59:21 -0800 Subject: [PATCH 08/10] ARCv2: IOC: Use actual memory size to setup aperture size vs. fixed 512M before. But this still assumes that all of memory is under IOC which may not be true for the SoC. Improve that later when this becomes a real issue, by specifying this from DT. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/setup.h | 1 + arch/arc/mm/cache.c | 12 ++++++++++-- arch/arc/mm/init.c | 5 +++++ 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h index cb954cdab070..c568a9df82b1 100644 --- a/arch/arc/include/asm/setup.h +++ b/arch/arc/include/asm/setup.h @@ -31,6 +31,7 @@ extern int root_mountflags, end_mem; void setup_processor(void); void __init setup_arch_memory(void); +long __init arc_get_mem_sz(void); /* Helpers used in arc_*_mumbojumbo routines */ #define IS_AVAIL1(v, s) ((v) ? s : "") diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 1b4cda10844a..3c275a81528c 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -995,6 +995,8 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) */ noinline void arc_ioc_setup(void) { + unsigned int ap_sz; + /* Flush + invalidate + disable L1 dcache */ __dc_disable(); @@ -1005,8 +1007,14 @@ noinline void arc_ioc_setup(void) /* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */ write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); - /* IOC Aperture size: TBD: handle different mem sizes, PAE... */ - write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); + /* + * IOC Aperture size: + * decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M + * TBD: fix for PGU + 1GB of low mem + * TBD: fix for PAE + */ + ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2; + write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz); write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 399e2f223d25..8c9415ed6280 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -40,6 +40,11 @@ struct pglist_data node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); #endif +long __init arc_get_mem_sz(void) +{ + return low_mem_sz; +} + /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ static int __init setup_mem_sz(char *str) { From 76894a72a0d7e0759de272bf3f4d2279ebd86d0b Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 18 Jan 2017 15:10:52 -0800 Subject: [PATCH 09/10] ARC: mm: split arc_cache_init to allow __init reaping of bulk arc_cache_init() is called for each core so can't be tagged __init. However bulk of it is only executed by master core and thus is candidate for __init reaping. So split it up to allow that. Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 3c275a81528c..ee01979e3d01 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -993,7 +993,7 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) * 3. All Caches need to be disabled when setting up IOC to elide any in-flight * Coherency transactions */ -noinline void arc_ioc_setup(void) +noinline void __init arc_ioc_setup(void) { unsigned int ap_sz; @@ -1023,21 +1023,9 @@ noinline void arc_ioc_setup(void) __dc_enable(); } -void arc_cache_init(void) +void __init arc_cache_init_master(void) { unsigned int __maybe_unused cpu = smp_processor_id(); - char str[256]; - - printk(arc_cache_mumbojumbo(0, str, sizeof(str))); - - /* - * Only master CPU needs to execute rest of function: - * - Assume SMP so all cores will have same cache config so - * any geomtry checks will be same for all - * - IOC setup / dma callbacks only need to be setup once - */ - if (cpu) - return; if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; @@ -1106,3 +1094,20 @@ void arc_cache_init(void) __dma_cache_wback = __dma_cache_wback_l1; } } + +void __ref arc_cache_init(void) +{ + unsigned int __maybe_unused cpu = smp_processor_id(); + char str[256]; + + printk(arc_cache_mumbojumbo(0, str, sizeof(str))); + + /* + * Only master CPU needs to execute rest of function: + * - Assume SMP so all cores will have same cache config so + * any geomtry checks will be same for all + * - IOC setup / dma callbacks only need to be setup once + */ + if (!cpu) + arc_cache_init_master(); +} From d0e73e2ac6a6b157159e1e62f981c06d29f42336 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 17 Jan 2017 11:09:18 -0800 Subject: [PATCH 10/10] ARC: Revert "ARC: mm: IOC: Don't enable IOC by default" The programming model has been fixed with prev patches so re-enable it by default This reverts commit 23cb1f644019bac49d87b4dd7c1eac0569cc4f53. Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index ee01979e3d01..d408fa21a07c 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -23,7 +23,7 @@ static int l2_line_sz; static int ioc_exists; -int slc_enable = 1, ioc_enable = 0; +int slc_enable = 1, ioc_enable = 1; unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */ unsigned long perip_end = 0xFFFFFFFF; /* legacy value */