mtd: spi-nor: cadence-quadspi: Fix page fault kernel panic

The current Cadence QSPI driver caused a kernel panic when loading
a Root Filesystem from QSPI. The problem was caused by reading more
bytes than needed because the QSPI operated on 4 bytes at a time.
<snip>
[    7.947754] spi_nor_read[1048]:from 0x037cad74, len 1 [bfe07fff]
[    7.956247] cqspi_read[910]:offset 0x58502516, buffer=bfe07fff
[    7.956247]
[    7.966046] Unable to handle kernel paging request at virtual
address bfe08002
[    7.973239] pgd = eebfc000
[    7.975931] [bfe08002] *pgd=2fffb811, *pte=00000000, *ppte=00000000
</snip>
Notice above how only 1 byte needed to be read but by reading 4 bytes
into the end of a mapped page, an unrecoverable page fault occurred.

This patch uses a temporary buffer to hold the 4 bytes read and then
copies only the bytes required into the buffer. A min() function is
used to limit the length to prevent buffer overflows.

Request testing of this patch on other platforms. This was tested
on the Intel Arria10 SoCFPGA DevKit.

Fixes: 0cf1725676 ("mtd: spi-nor: cqspi: Fix build on arches missing readsl/writesl")
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
This commit is contained in:
Thor Thayer 2018-04-23 12:45:11 -05:00 committed by Boris Brezillon
parent 23566c3798
commit 47016b341f
1 changed files with 17 additions and 2 deletions

View File

@ -501,7 +501,9 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
void __iomem *reg_base = cqspi->iobase;
void __iomem *ahb_base = cqspi->ahb_base;
unsigned int remaining = n_rx;
unsigned int mod_bytes = n_rx % 4;
unsigned int bytes_to_read = 0;
u8 *rxbuf_end = rxbuf + n_rx;
int ret = 0;
writel(from_addr, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
@ -530,11 +532,24 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
}
while (bytes_to_read != 0) {
unsigned int word_remain = round_down(remaining, 4);
bytes_to_read *= cqspi->fifo_width;
bytes_to_read = bytes_to_read > remaining ?
remaining : bytes_to_read;
ioread32_rep(ahb_base, rxbuf,
DIV_ROUND_UP(bytes_to_read, 4));
bytes_to_read = round_down(bytes_to_read, 4);
/* Read 4 byte word chunks then single bytes */
if (bytes_to_read) {
ioread32_rep(ahb_base, rxbuf,
(bytes_to_read / 4));
} else if (!word_remain && mod_bytes) {
unsigned int temp = ioread32(ahb_base);
bytes_to_read = mod_bytes;
memcpy(rxbuf, &temp, min((unsigned int)
(rxbuf_end - rxbuf),
bytes_to_read));
}
rxbuf += bytes_to_read;
remaining -= bytes_to_read;
bytes_to_read = cqspi_get_rd_sram_level(cqspi);