mfd: Fix for DA9055 driver initialization

This patch clears all the events received while powering up DA9055.

While powering up DA9055, both power sequencer and gpio events are received.
These events remain uncleared after boot up, due to which further event handling
also fails. DA9055 has three event registers. The event register bits are set
to '1' on receiving an event. The events can be cleared on writing a '1' to
the set bit, which would then clear that bit to '0'. After applying this patch
we have a clean state after boot up.

Signed-off-by: Ankur Raina <Ankur.Raina@kpitcummins.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Ankur Raina 2013-07-05 18:48:30 +05:30 committed by Samuel Ortiz
parent aa32acadcf
commit 4b3b4a501d
1 changed files with 5 additions and 0 deletions

View File

@ -381,6 +381,7 @@ int da9055_device_init(struct da9055 *da9055)
{
struct da9055_pdata *pdata = da9055->dev->platform_data;
int ret;
uint8_t clear_events[3] = {0xFF, 0xFF, 0xFF};
if (pdata && pdata->init != NULL)
pdata->init(da9055);
@ -390,6 +391,10 @@ int da9055_device_init(struct da9055 *da9055)
else
da9055->irq_base = pdata->irq_base;
ret = da9055_group_write(da9055, DA9055_REG_EVENT_A, 3, clear_events);
if (ret < 0)
return ret;
ret = regmap_add_irq_chip(da9055->regmap, da9055->chip_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
da9055->irq_base, &da9055_regmap_irq_chip,