Merge branch 'merge' into next

This commit is contained in:
Benjamin Herrenschmidt 2011-05-19 17:00:06 +10:00
commit 4c8440666b
803 changed files with 8421 additions and 4483 deletions

View File

@ -294,6 +294,7 @@
<!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
<!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
<!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
<!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
<!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
<!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
<!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">

View File

@ -34,7 +34,7 @@
<varlistentry>
<term><parameter>request</parameter></term>
<listitem>
<para>MEDIA_IOC_ENUM_LINKS</para>
<para>MEDIA_IOC_SETUP_LINK</para>
</listitem>
</varlistentry>
<varlistentry>

View File

@ -0,0 +1,79 @@
<refentry id="V4L2-PIX-FMT-Y12">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_Y12 ('Y12 ')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname><constant>V4L2_PIX_FMT_Y12</constant></refname>
<refpurpose>Grey-scale image</refpurpose>
</refnamediv>
<refsect1>
<title>Description</title>
<para>This is a grey-scale image with a depth of 12 bits per pixel. Pixels
are stored in 16-bit words with unused high bits padded with 0. The least
significant byte is stored at lower memory addresses (little-endian).</para>
<example>
<title><constant>V4L2_PIX_FMT_Y12</constant> 4 &times; 4
pixel image</title>
<formalpara>
<title>Byte Order.</title>
<para>Each cell is one byte.
<informaltable frame="none">
<tgroup cols="9" align="center">
<colspec align="left" colwidth="2*" />
<tbody valign="top">
<row>
<entry>start&nbsp;+&nbsp;0:</entry>
<entry>Y'<subscript>00low</subscript></entry>
<entry>Y'<subscript>00high</subscript></entry>
<entry>Y'<subscript>01low</subscript></entry>
<entry>Y'<subscript>01high</subscript></entry>
<entry>Y'<subscript>02low</subscript></entry>
<entry>Y'<subscript>02high</subscript></entry>
<entry>Y'<subscript>03low</subscript></entry>
<entry>Y'<subscript>03high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;8:</entry>
<entry>Y'<subscript>10low</subscript></entry>
<entry>Y'<subscript>10high</subscript></entry>
<entry>Y'<subscript>11low</subscript></entry>
<entry>Y'<subscript>11high</subscript></entry>
<entry>Y'<subscript>12low</subscript></entry>
<entry>Y'<subscript>12high</subscript></entry>
<entry>Y'<subscript>13low</subscript></entry>
<entry>Y'<subscript>13high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;16:</entry>
<entry>Y'<subscript>20low</subscript></entry>
<entry>Y'<subscript>20high</subscript></entry>
<entry>Y'<subscript>21low</subscript></entry>
<entry>Y'<subscript>21high</subscript></entry>
<entry>Y'<subscript>22low</subscript></entry>
<entry>Y'<subscript>22high</subscript></entry>
<entry>Y'<subscript>23low</subscript></entry>
<entry>Y'<subscript>23high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;24:</entry>
<entry>Y'<subscript>30low</subscript></entry>
<entry>Y'<subscript>30high</subscript></entry>
<entry>Y'<subscript>31low</subscript></entry>
<entry>Y'<subscript>31high</subscript></entry>
<entry>Y'<subscript>32low</subscript></entry>
<entry>Y'<subscript>32high</subscript></entry>
<entry>Y'<subscript>33low</subscript></entry>
<entry>Y'<subscript>33high</subscript></entry>
</row>
</tbody>
</tgroup>
</informaltable>
</para>
</formalpara>
</example>
</refsect1>
</refentry>

View File

@ -696,6 +696,7 @@ information.</para>
&sub-packed-yuv;
&sub-grey;
&sub-y10;
&sub-y12;
&sub-y16;
&sub-yuyv;
&sub-uyvy;

View File

@ -456,6 +456,23 @@
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
</row>
<row id="V4L2-MBUS-FMT-SGBRG8-1X8">
<entry>V4L2_MBUS_FMT_SGBRG8_1X8</entry>
<entry>0x3013</entry>
<entry></entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>g<subscript>7</subscript></entry>
<entry>g<subscript>6</subscript></entry>
<entry>g<subscript>5</subscript></entry>
<entry>g<subscript>4</subscript></entry>
<entry>g<subscript>3</subscript></entry>
<entry>g<subscript>2</subscript></entry>
<entry>g<subscript>1</subscript></entry>
<entry>g<subscript>0</subscript></entry>
</row>
<row id="V4L2-MBUS-FMT-SGRBG8-1X8">
<entry>V4L2_MBUS_FMT_SGRBG8_1X8</entry>
<entry>0x3002</entry>
@ -473,6 +490,23 @@
<entry>g<subscript>1</subscript></entry>
<entry>g<subscript>0</subscript></entry>
</row>
<row id="V4L2-MBUS-FMT-SRGGB8-1X8">
<entry>V4L2_MBUS_FMT_SRGGB8_1X8</entry>
<entry>0x3014</entry>
<entry></entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>r<subscript>7</subscript></entry>
<entry>r<subscript>6</subscript></entry>
<entry>r<subscript>5</subscript></entry>
<entry>r<subscript>4</subscript></entry>
<entry>r<subscript>3</subscript></entry>
<entry>r<subscript>2</subscript></entry>
<entry>r<subscript>1</subscript></entry>
<entry>r<subscript>0</subscript></entry>
</row>
<row id="V4L2-MBUS-FMT-SBGGR10-DPCM8-1X8">
<entry>V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8</entry>
<entry>0x300b</entry>
@ -2159,6 +2193,31 @@
<entry>u<subscript>1</subscript></entry>
<entry>u<subscript>0</subscript></entry>
</row>
<row id="V4L2-MBUS-FMT-Y12-1X12">
<entry>V4L2_MBUS_FMT_Y12_1X12</entry>
<entry>0x2013</entry>
<entry></entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>-</entry>
<entry>y<subscript>11</subscript></entry>
<entry>y<subscript>10</subscript></entry>
<entry>y<subscript>9</subscript></entry>
<entry>y<subscript>8</subscript></entry>
<entry>y<subscript>7</subscript></entry>
<entry>y<subscript>6</subscript></entry>
<entry>y<subscript>5</subscript></entry>
<entry>y<subscript>4</subscript></entry>
<entry>y<subscript>3</subscript></entry>
<entry>y<subscript>2</subscript></entry>
<entry>y<subscript>1</subscript></entry>
<entry>y<subscript>0</subscript></entry>
</row>
<row id="V4L2-MBUS-FMT-UYVY8-1X16">
<entry>V4L2_MBUS_FMT_UYVY8_1X16</entry>
<entry>0x200f</entry>

View File

@ -52,8 +52,10 @@ Brief summary of control files.
tasks # attach a task(thread) and show list of threads
cgroup.procs # show list of processes
cgroup.event_control # an interface for event_fd()
memory.usage_in_bytes # show current memory(RSS+Cache) usage.
memory.memsw.usage_in_bytes # show current memory+Swap usage
memory.usage_in_bytes # show current res_counter usage for memory
(See 5.5 for details)
memory.memsw.usage_in_bytes # show current res_counter usage for memory+Swap
(See 5.5 for details)
memory.limit_in_bytes # set/show limit of memory usage
memory.memsw.limit_in_bytes # set/show limit of memory+Swap usage
memory.failcnt # show the number of memory usage hits limits
@ -453,6 +455,15 @@ memory under it will be reclaimed.
You can reset failcnt by writing 0 to failcnt file.
# echo 0 > .../memory.failcnt
5.5 usage_in_bytes
For efficiency, as other kernel components, memory cgroup uses some optimization
to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the
method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz
value for efficient access. (Of course, when necessary, it's synchronized.)
If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
value in memory.stat(see 5.2).
6. Hierarchy support
The memory controller supports a deep hierarchy and hierarchical accounting.

View File

@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before
entering atomic context, using:
int flex_array_prealloc(struct flex_array *array, unsigned int start,
unsigned int end, gfp_t flags);
unsigned int nr_elements, gfp_t flags);
This function will ensure that memory for the elements indexed in the range
defined by start and end has been allocated. Thereafter, a
defined by start and nr_elements has been allocated. Thereafter, a
flex_array_put() call on an element in that range is guaranteed not to
block.

View File

@ -14,10 +14,6 @@ Supported chips:
Prefix: 'gl523sm'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet:
* Intel Xeon Processor
Prefix: - any other - may require 'force_adm1021' parameter
Addresses scanned: none
Datasheet: Publicly available at Intel website
* Maxim MAX1617
Prefix: 'max1617'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
@ -91,21 +87,27 @@ will do no harm, but will return 'old' values. It is possible to make
ADM1021-clones do faster measurements, but there is really no good reason
for that.
Xeon support
------------
Some Xeon processors have real max1617, adm1021, or compatible chips
within them, with two temperature sensors.
Netburst-based Xeon support
---------------------------
Other Xeons have chips with only one sensor.
Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to
2003) microarchitecture had real MAX1617, ADM1021, or compatible chips
within them, with two temperature sensors. Other Xeon processors of this
era (with 400 MHz FSB) had chips with only one temperature sensor.
If you have a Xeon, and the adm1021 module loads, and both temperatures
appear valid, then things are good.
If you have such an old Xeon, and you get two valid temperatures when
loading the adm1021 module, then things are good.
If the adm1021 module doesn't load, you should try this:
modprobe adm1021 force_adm1021=BUS,ADDRESS
ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e.
If nothing happens when loading the adm1021 module, and you are certain
that your specific Xeon processor model includes compatible sensors, you
will have to explicitly instantiate the sensor chips from user-space. See
method 4 in Documentation/i2c/instantiating-devices. Possible slave
addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that
only temp2 will be correct and temp1 will have to be ignored.
If you have dual Xeons you may have appear to have two separate
adm1021-compatible chips, or two single-temperature sensors, at distinct
addresses.
Previous generations of the Xeon processor (based on Pentium II/III)
didn't have these sensors. Next generations of Xeon processors (533 MHz
FSB and faster) lost them, until the Core-based generation which
introduced integrated digital thermal sensors. These are supported by
the coretemp driver.

View File

@ -32,6 +32,16 @@ Supported chips:
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the ON Semiconductor website
http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
* Analog Devices ADT7461A
Prefix: 'adt7461a'
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the ON Semiconductor website
http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
* ON Semiconductor NCT1008
Prefix: 'nct1008'
Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the ON Semiconductor website
http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
* Maxim MAX6646
Prefix: 'max6646'
Addresses scanned: I2C 0x4d
@ -149,7 +159,7 @@ ADM1032:
* ALERT is triggered by open remote sensor.
* SMBus PEC support for Write Byte and Receive Byte transactions.
ADT7461:
ADT7461, ADT7461A, NCT1008:
* Extended temperature range (breaks compatibility)
* Lower resolution for remote temperature
@ -195,9 +205,9 @@ are exported, one for each channel, but these values are of course linked.
Only the local hysteresis can be set from user-space, and the same delta
applies to the remote hysteresis.
The lm90 driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.
The lm90 driver will not update its values more frequently than configured with
the update_interval attribute; reading them more often will do no harm, but will
return 'old' values.
SMBus Alert Support
-------------------
@ -205,11 +215,12 @@ SMBus Alert Support
This driver has basic support for SMBus alert. When an alert is received,
the status register is read and the faulty temperature channel is logged.
The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus
alert protocol properly so additional care is needed: the ALERT output is
disabled when an alert is received, and is re-enabled only when the alarm
is gone. Otherwise the chip would block alerts from other chips in the bus
as long as the alarm is active.
The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
properly so additional care is needed: the ALERT output is disabled when
an alert is received, and is re-enabled only when the alarm is gone.
Otherwise the chip would block alerts from other chips in the bus as long
as the alarm is active.
PEC Support
-----------

View File

@ -0,0 +1,62 @@
Kernel driver max16064
======================
Supported chips:
* Maxim MAX16064
Prefix: 'max16064'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
Description
-----------
This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply
Controller with Active-Voltage Output Control and PMBus Interface.
The driver is a client driver to the core PMBus driver.
Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
Platform data support
---------------------
The driver supports standard PMBus driver platform data.
Sysfs entries
-------------
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
in[1-4]_label "vout[1-4]"
in[1-4]_input Measured voltage. From READ_VOUT register.
in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
temp1_input Measured temperature. From READ_TEMPERATURE_1 register.
temp1_max Maximum temperature. From OT_WARN_LIMIT register.
temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
temp1_max_alarm Chip temperature high alarm. Set by comparing
READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
status is set.
temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
status is set.

View File

@ -0,0 +1,79 @@
Kernel driver max34440
======================
Supported chips:
* Maxim MAX34440
Prefixes: 'max34440'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
* Maxim MAX34441
PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
Prefixes: 'max34441'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
Description
-----------
This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
and Intelligent Fan Controller.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
Platform data support
---------------------
The driver supports standard PMBus driver platform data.
Sysfs entries
-------------
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
in[1-6]_label "vout[1-6]".
in[1-6]_input Measured voltage. From READ_VOUT register.
in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
curr[1-6]_label "iout[1-6]".
curr[1-6]_input Measured current. From READ_IOUT register.
curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
in6 and curr6 attributes only exist for MAX34440.
temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register.
temp1 is the chip's internal temperature. temp2..temp5
are remote I2C temperature sensors. For MAX34441, temp6
is a remote thermal-diode sensor. For MAX34440, temp6..8
are remote I2C temperature sensors.
temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register.
temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register.
temp[1-8]_max_alarm Temperature high alarm.
temp[1-8]_crit_alarm Temperature critical high alarm.
temp7 and temp8 attributes only exist for MAX34440.

View File

@ -0,0 +1,69 @@
Kernel driver max8688
=====================
Supported chips:
* Maxim MAX8688
Prefix: 'max8688'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
Description
-----------
This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply
Controller/Monitor with PMBus Interface.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
Platform data support
---------------------
The driver supports standard PMBus driver platform data.
Sysfs entries
-------------
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
in1_label "vout1"
in1_input Measured voltage. From READ_VOUT register.
in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
curr1_label "iout1"
curr1_input Measured current. From READ_IOUT register.
curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register.
curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
temp1_input Measured temperature. From READ_TEMPERATURE_1 register.
temp1_max Maximum temperature. From OT_WARN_LIMIT register.
temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
temp1_max_alarm Chip temperature high alarm. Set by comparing
READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
status is set.
temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
status is set.

View File

@ -13,26 +13,6 @@ Supported chips:
Prefix: 'ltc2978'
Addresses scanned: -
Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
* Maxim MAX16064
Quad Power-Supply Controller
Prefix: 'max16064'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
* Maxim MAX34440
PMBus 6-Channel Power-Supply Manager
Prefixes: 'max34440'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
* Maxim MAX34441
PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
Prefixes: 'max34441'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
* Maxim MAX8688
Digital Power-Supply Controller/Monitor
Prefix: 'max8688'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
* Generic PMBus devices
Prefix: 'pmbus'
Addresses scanned: -
@ -175,11 +155,13 @@ currX_crit Critical maximum current.
From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
currX_alarm Current high alarm.
From IIN_OC_WARNING or IOUT_OC_WARNING status.
currX_max_alarm Current high alarm.
From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
currX_lcrit_alarm Output current critical low alarm.
From IOUT_UC_FAULT status.
currX_crit_alarm Current critical high alarm.
From IIN_OC_FAULT or IOUT_OC_FAULT status.
currX_label "iin" or "vinY"
currX_label "iin" or "ioutY"
powerX_input Measured power. From READ_PIN or READ_POUT register.
powerX_cap Output power cap. From POUT_MAX register.
@ -193,13 +175,13 @@ powerX_crit_alarm Output power critical high alarm.
From POUT_OP_FAULT status.
powerX_label "pin" or "poutY"
tempX_input Measured tempererature.
tempX_input Measured temperature.
From READ_TEMPERATURE_X register.
tempX_min Mimimum tempererature. From UT_WARN_LIMIT register.
tempX_max Maximum tempererature. From OT_WARN_LIMIT register.
tempX_lcrit Critical low tempererature.
tempX_min Mimimum temperature. From UT_WARN_LIMIT register.
tempX_max Maximum temperature. From OT_WARN_LIMIT register.
tempX_lcrit Critical low temperature.
From UT_FAULT_LIMIT register.
tempX_crit Critical high tempererature.
tempX_crit Critical high temperature.
From OT_FAULT_LIMIT register.
tempX_min_alarm Chip temperature low alarm. Set by comparing
READ_TEMPERATURE_X with UT_WARN_LIMIT if

View File

@ -150,8 +150,8 @@ in8_crit_alarm Channel F critical alarm
in9_crit_alarm AIN1 critical alarm
in10_crit_alarm AIN2 critical alarm
temp1_input Chip tempererature
temp1_min Mimimum chip tempererature
temp1_max Maximum chip tempererature
temp1_crit Critical chip tempererature
temp1_input Chip temperature
temp1_min Mimimum chip temperature
temp1_max Maximum chip temperature
temp1_crit Critical chip temperature
temp1_crit_alarm Temperature critical alarm

View File

@ -0,0 +1,109 @@
How to Get Your Patch Accepted Into the Hwmon Subsystem
-------------------------------------------------------
This text is is a collection of suggestions for people writing patches or
drivers for the hwmon subsystem. Following these suggestions will greatly
increase the chances of your change being accepted.
1. General
----------
* It should be unnecessary to mention, but please read and follow
Documentation/SubmitChecklist
Documentation/SubmittingDrivers
Documentation/SubmittingPatches
Documentation/CodingStyle
* If your patch generates checkpatch warnings, please refrain from explanations
such as "I don't like that coding style". Keep in mind that each unnecessary
warning helps hiding a real problem. If you don't like the kernel coding
style, don't write kernel drivers.
* Please test your patch thoroughly. We are not your test group.
Sometimes a patch can not or not completely be tested because of missing
hardware. In such cases, you should test-build the code on at least one
architecture. If run-time testing was not achieved, it should be written
explicitly below the patch header.
* If your patch (or the driver) is affected by configuration options such as
CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration
variants.
2. Adding functionality to existing drivers
-------------------------------------------
* Make sure the documentation in Documentation/hwmon/<driver_name> is up to
date.
* Make sure the information in Kconfig is up to date.
* If the added functionality requires some cleanup or structural changes, split
your patch into a cleanup part and the actual addition. This makes it easier
to review your changes, and to bisect any resulting problems.
* Never mix bug fixes, cleanup, and functional enhancements in a single patch.
3. New drivers
--------------
* Running your patch or driver file(s) through checkpatch does not mean its
formatting is clean. If unsure about formatting in your new driver, run it
through Lindent. Lindent is not perfect, and you may have to do some minor
cleanup, but it is a good start.
* Consider adding yourself to MAINTAINERS.
* Document the driver in Documentation/hwmon/<driver_name>.
* Add the driver to Kconfig and Makefile in alphabetical order.
* Make sure that all dependencies are listed in Kconfig. For new drivers, it
is most likely prudent to add a dependency on EXPERIMENTAL.
* Avoid forward declarations if you can. Rearrange the code if necessary.
* Avoid calculations in macros and macro-generated functions. While such macros
may save a line or so in the source, it obfuscates the code and makes code
review more difficult. It may also result in code which is more complicated
than necessary. Use inline functions or just regular functions instead.
* If the driver has a detect function, make sure it is silent. Debug messages
and messages printed after a successful detection are acceptable, but it
must not print messages such as "Chip XXX not found/supported".
Keep in mind that the detect function will run for all drivers supporting an
address if a chip is detected on that address. Unnecessary messages will just
pollute the kernel log and not provide any value.
* Provide a detect function if and only if a chip can be detected reliably.
* Avoid writing to chip registers in the detect function. If you have to write,
only do it after you have already gathered enough data to be certain that the
detection is going to be successful.
Keep in mind that the chip might not be what your driver believes it is, and
writing to it might cause a bad misconfiguration.
* Make sure there are no race conditions in the probe function. Specifically,
completely initialize your chip first, then create sysfs entries and register
with the hwmon subsystem.
* Do not provide support for deprecated sysfs attributes.
* Do not create non-standard attributes unless really needed. If you have to use
non-standard attributes, or you believe you do, discuss it on the mailing list
first. Either case, provide a detailed explanation why you need the
non-standard attribute(s).
Standard attributes are specified in Documentation/hwmon/sysfs-interface.
* When deciding which sysfs attributes to support, look at the chip's
capabilities. While we do not expect your driver to support everything the
chip may offer, it should at least support all limits and alarms.
* Last but not least, please check if a driver for your chip already exists
before starting to write a new driver. Especially for temperature sensors,
new chips are often variants of previously released chips. In some cases,
a presumably new chip may simply have been relabeled.

View File

@ -552,6 +552,16 @@ also have
within the array where IO will be blocked. This is currently
only supported for raid4/5/6.
sync_min
sync_max
The two values, given as numbers of sectors, indicate a range
withing the array where 'check'/'repair' will operate. Must be
a multiple of chunk_size. When it reaches "sync_max" it will
pause, rather than complete.
You can use 'select' or 'poll' on "sync_completed" to wait for
that number to reach sync_max. Then you can either increase
"sync_max", or can write 'idle' to "sync_action".
Each active md device may also have attributes specific to the
personality module that manages it.

View File

@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
The result is forwarded to the ADC capture FIFO (thus to the standard capture
PCM device).
name='Music Playback Volume',index=0
name='Synth Playback Volume',index=0
This control is used to attenuate samples for left and right MIDI FX-bus
accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
name='Music Capture Volume',index=0
name='Music Capture Switch',index=0
name='Synth Capture Volume',index=0
name='Synth Capture Switch',index=0
These controls are used to attenuate samples for left and right MIDI FX-bus
accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.

View File

@ -37,7 +37,7 @@ Generic scaling / cropping scheme
-1'-
In the above chart minuses and slashes represent "real" data amounts, points and
accents represent "useful" data, basically, CEU scaled amd cropped output,
accents represent "useful" data, basically, CEU scaled and cropped output,
mapped back onto the client's source plane.
Such a configuration can be produced by user requests:
@ -65,7 +65,7 @@ Do not touch input rectangle - it is already optimal.
1. Calculate current sensor scales:
scale_s = ((3') - (3)) / ((2') - (2))
scale_s = ((2') - (2)) / ((3') - (3))
2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
current sensor scales onto input window - this is user S_CROP:
@ -80,7 +80,7 @@ window:
4. Calculate sensor output window by applying combined scales to real input
window:
width_s_out = ((2') - (2)) / scale_comb
width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb
5. Apply iterative sensor S_FMT for sensor output window.

View File

@ -12,6 +12,7 @@ CONTENTS
4. Application Programming Interface (API)
5. Example Execution Scenarios
6. Guidelines
7. Debugging
1. Introduction
@ -379,3 +380,42 @@ If q1 has WQ_CPU_INTENSIVE set,
* Unless work items are expected to consume a huge amount of CPU
cycles, using a bound wq is usually beneficial due to the increased
level of locality in wq operations and work item execution.
7. Debugging
Because the work functions are executed by generic worker threads
there are a few tricks needed to shed some light on misbehaving
workqueue users.
Worker threads show up in the process list as:
root 5671 0.0 0.0 0 0 ? S 12:07 0:00 [kworker/0:1]
root 5672 0.0 0.0 0 0 ? S 12:07 0:00 [kworker/1:2]
root 5673 0.0 0.0 0 0 ? S 12:12 0:00 [kworker/0:0]
root 5674 0.0 0.0 0 0 ? S 12:13 0:00 [kworker/1:0]
If kworkers are going crazy (using too much cpu), there are two types
of possible problems:
1. Something beeing scheduled in rapid succession
2. A single work item that consumes lots of cpu cycles
The first one can be tracked using tracing:
$ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
$ cat /sys/kernel/debug/tracing/trace_pipe > out.txt
(wait a few secs)
^C
If something is busy looping on work queueing, it would be dominating
the output and the offender can be determined with the work item
function.
For the second type of problems it should be possible to just check
the stack trace of the offending worker thread.
$ cat /proc/THE_OFFENDING_KWORKER/stack
The work item's function should be trivially visible in the stack
trace.

View File

@ -151,6 +151,7 @@ S: Maintained
F: drivers/net/hamradio/6pack.c
8169 10/100/1000 GIGABIT ETHERNET DRIVER
M: Realtek linux nic maintainers <nic_swsd@realtek.com>
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
@ -1031,12 +1032,13 @@ W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c64xx/
ARM/S5P ARM ARCHITECTURES
ARM/S5P EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene.kim@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5p*/
F: arch/arm/mach-exynos*/
ARM/SAMSUNG MOBILE MACHINE SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
@ -2807,42 +2809,23 @@ GPIO SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
S: Maintained
T: git git://git.secretlab.ca/git/linux-2.6.git
F: Documentation/gpio/gpio.txt
F: Documentation/gpio.txt
F: drivers/gpio/
F: include/linux/gpio*
GRE DEMULTIPLEXER DRIVER
M: Dmitry Kozlov <xeb@mail.ru>
L: netdev@vger.kernel.org
S: Maintained
F: net/ipv4/gre.c
F: include/net/gre.h
GRETH 10/100/1G Ethernet MAC device driver
M: Kristoffer Glembo <kristoffer@gaisler.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/greth*
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
M: Frank Seidel <frank@f-seidel.de>
L: platform-driver-x86@vger.kernel.org
W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
F: drivers/platform/x86/hdaps.c
HWPOISON MEMORY FAILURE HANDLING
M: Andi Kleen <andi@firstfloor.org>
L: linux-mm@kvack.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
S: Maintained
F: mm/memory-failure.c
F: mm/hwpoison-inject.c
HYPERVISOR VIRTUAL CONSOLE DRIVER
L: linuxppc-dev@lists.ozlabs.org
S: Odd Fixes
F: drivers/tty/hvc/
iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
M: Peter Jones <pjones@redhat.com>
M: Konrad Rzeszutek Wilk <konrad@kernel.org>
S: Maintained
F: drivers/firmware/iscsi_ibft*
GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
@ -2893,6 +2876,26 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
M: Frank Seidel <frank@f-seidel.de>
L: platform-driver-x86@vger.kernel.org
W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
F: drivers/platform/x86/hdaps.c
HWPOISON MEMORY FAILURE HANDLING
M: Andi Kleen <andi@firstfloor.org>
L: linux-mm@kvack.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
S: Maintained
F: mm/memory-failure.c
F: mm/hwpoison-inject.c
HYPERVISOR VIRTUAL CONSOLE DRIVER
L: linuxppc-dev@lists.ozlabs.org
S: Odd Fixes
F: drivers/tty/hvc/
HARDWARE MONITORING
M: Jean Delvare <khali@linux-fr.org>
M: Guenter Roeck <guenter.roeck@ericsson.com>
@ -3476,6 +3479,12 @@ F: Documentation/isapnp.txt
F: drivers/pnp/isapnp/
F: include/linux/isapnp.h
iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
M: Peter Jones <pjones@redhat.com>
M: Konrad Rzeszutek Wilk <konrad@kernel.org>
S: Maintained
F: drivers/firmware/iscsi_ibft*
ISCSI
M: Mike Christie <michaelc@cs.wisc.edu>
L: open-iscsi@googlegroups.com
@ -4987,6 +4996,13 @@ F: Documentation/pps/
F: drivers/pps/
F: include/linux/pps*.h
PPTP DRIVER
M: Dmitry Kozlov <xeb@mail.ru>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pptp.c
W: http://sourceforge.net/projects/accel-pptp
PREEMPTIBLE KERNEL
M: Robert Love <rml@tech9.net>
L: kpreempt-tech@lists.sourceforge.net
@ -5395,7 +5411,7 @@ F: drivers/media/video/*7146*
F: include/media/*7146*
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassi.brar@samsung.com>
M: Jassi Brar <jassisinghbrar@gmail.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/samsung
@ -6554,7 +6570,7 @@ S: Maintained
F: drivers/usb/host/uhci*
USB "USBNET" DRIVER FRAMEWORK
M: David Brownell <dbrownell@users.sourceforge.net>
M: Oliver Neukum <oneukum@suse.de>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
@ -6920,6 +6936,18 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
S: Maintained
F: drivers/platform/x86
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.linux-foundation.org
S: Supported
F: arch/x86/xen/
F: drivers/*/xen-*front.c
F: drivers/xen/
F: arch/x86/include/asm/xen/
F: include/xen/
XEN NETWORK BACKEND DRIVER
M: Ian Campbell <ian.campbell@citrix.com>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
@ -6941,18 +6969,6 @@ S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.linux-foundation.org
S: Supported
F: arch/x86/xen/
F: drivers/*/xen-*front.c
F: drivers/xen/
F: arch/x86/include/asm/xen/
F: include/xen/
XFS FILESYSTEM
P: Silicon Graphics Inc
M: Alex Elder <aelder@sgi.com>
@ -7022,20 +7038,6 @@ M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/tty/serial/zs.*
GRE DEMULTIPLEXER DRIVER
M: Dmitry Kozlov <xeb@mail.ru>
L: netdev@vger.kernel.org
S: Maintained
F: net/ipv4/gre.c
F: include/net/gre.h
PPTP DRIVER
M: Dmitry Kozlov <xeb@mail.ru>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pptp.c
W: http://sourceforge.net/projects/accel-pptp
THE REST
M: Linus Torvalds <torvalds@linux-foundation.org>
L: linux-kernel@vger.kernel.org

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 39
EXTRAVERSION = -rc4
EXTRAVERSION = -rc7
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*

View File

@ -452,10 +452,14 @@
#define __NR_fanotify_init 494
#define __NR_fanotify_mark 495
#define __NR_prlimit64 496
#define __NR_name_to_handle_at 497
#define __NR_open_by_handle_at 498
#define __NR_clock_adjtime 499
#define __NR_syncfs 500
#ifdef __KERNEL__
#define NR_SYSCALLS 497
#define NR_SYSCALLS 501
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR

View File

@ -498,23 +498,27 @@ sys_call_table:
.quad sys_ni_syscall /* sys_timerfd */
.quad sys_eventfd
.quad sys_recvmmsg
.quad sys_fallocate /* 480 */
.quad sys_fallocate /* 480 */
.quad sys_timerfd_create
.quad sys_timerfd_settime
.quad sys_timerfd_gettime
.quad sys_signalfd4
.quad sys_eventfd2 /* 485 */
.quad sys_eventfd2 /* 485 */
.quad sys_epoll_create1
.quad sys_dup3
.quad sys_pipe2
.quad sys_inotify_init1
.quad sys_preadv /* 490 */
.quad sys_preadv /* 490 */
.quad sys_pwritev
.quad sys_rt_tgsigqueueinfo
.quad sys_perf_event_open
.quad sys_fanotify_init
.quad sys_fanotify_mark /* 495 */
.quad sys_fanotify_mark /* 495 */
.quad sys_prlimit64
.quad sys_name_to_handle_at
.quad sys_open_by_handle_at
.quad sys_clock_adjtime
.quad sys_syncfs /* 500 */
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object

View File

@ -375,8 +375,7 @@ static struct clocksource clocksource_rpcc = {
static inline void register_rpcc_clocksource(long cycle_freq)
{
clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4);
clocksource_register(&clocksource_rpcc);
clocksource_register_hz(&clocksource_rpcc, cycle_freq);
}
#else /* !CONFIG_SMP */
static inline void register_rpcc_clocksource(long cycle_freq)

View File

@ -74,7 +74,7 @@ ZTEXTADDR := $(CONFIG_ZBOOT_ROM_TEXT)
ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS)
else
ZTEXTADDR := 0
ZBSSADDR := ALIGN(4)
ZBSSADDR := ALIGN(8)
endif
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/

View File

@ -179,15 +179,14 @@ not_angel:
bl cache_on
restart: adr r0, LC0
ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12}
ldr sp, [r0, #32]
ldmia r0, {r1, r2, r3, r6, r9, r11, r12}
ldr sp, [r0, #28]
/*
* We might be running at a different address. We need
* to fix up various pointers.
*/
sub r0, r0, r1 @ calculate the delta offset
add r5, r5, r0 @ _start
add r6, r6, r0 @ _edata
#ifndef CONFIG_ZBOOT_ROM
@ -206,31 +205,40 @@ restart: adr r0, LC0
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
* r5 = start of this image
* r9 = size of decompressed image
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
* r4 >= r10 -> OK
* r4 + image length <= r5 -> OK
* r4 - 16k page directory >= r10 -> OK
* r4 + image length <= current position (pc) -> OK
*/
add r10, r10, #16384
cmp r4, r10
bhs wont_overwrite
add r10, r4, r9
cmp r10, r5
ARM( cmp r10, pc )
THUMB( mov lr, pc )
THUMB( cmp r10, lr )
bls wont_overwrite
/*
* Relocate ourselves past the end of the decompressed kernel.
* r5 = start of this image
* r6 = _edata
* r10 = end of the decompressed kernel
* Because we always copy ahead, we need to do it from the end and go
* backward in case the source and destination overlap.
*/
/* Round up to next 256-byte boundary. */
add r10, r10, #256
/*
* Bump to the next 256-byte boundary with the size of
* the relocation code added. This avoids overwriting
* ourself when the offset is small.
*/
add r10, r10, #((reloc_code_end - restart + 256) & ~255)
bic r10, r10, #255
/* Get start of code we want to copy and align it down. */
adr r5, restart
bic r5, r5, #31
sub r9, r6, r5 @ size to copy
add r9, r9, #31 @ rounded up to a multiple
bic r9, r9, #31 @ ... of 32 bytes
@ -245,6 +253,11 @@ restart: adr r0, LC0
/* Preserve offset to relocated code. */
sub r6, r9, r6
#ifndef CONFIG_ZBOOT_ROM
/* cache_clean_flush may use the stack, so relocate it */
add sp, sp, r6
#endif
bl cache_clean_flush
adr r0, BSYM(restart)
@ -333,7 +346,6 @@ not_relocated: mov r0, #0
LC0: .word LC0 @ r1
.word __bss_start @ r2
.word _end @ r3
.word _start @ r5
.word _edata @ r6
.word _image_size @ r9
.word _got_start @ r11
@ -1062,6 +1074,7 @@ memdump: mov r12, r0
#endif
.ltorg
reloc_code_end:
.align
.section ".stack", "aw", %nobits

View File

@ -54,6 +54,7 @@ SECTIONS
.bss : { *(.bss) }
_end = .;
. = ALIGN(8); /* the stack must be 64-bit aligned */
.stack : { *(.stack) }
.stab 0 : { *(.stab) }

View File

@ -0,0 +1,48 @@
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_HOTPLUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_FUTEX is not set
# CONFIG_TIMERFD is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_MMU is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91X40=y
CONFIG_MACH_AT91EB01=y
CONFIG_AT91_EARLY_USART0=y
CONFIG_CPU_ARM7TDMI=y
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_BASE=0x01000000
CONFIG_DRAM_SIZE=0x00400000
CONFIG_FLASH_MEM_BASE=0x01400000
CONFIG_PROCESSOR_ID=0x14000040
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_BINFMT_FLAT=y
# CONFIG_SUSPEND is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_FS=y
# CONFIG_ENABLE_MUST_CHECK is not set

View File

@ -2,6 +2,7 @@
#define __ASM_ARM_CPUTYPE_H
#include <linux/stringify.h>
#include <linux/kernel.h>
#define CPUID_ID 0
#define CPUID_CACHETYPE 1

View File

@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t;
struct kprobe;
typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
typedef unsigned long (kprobe_check_cc)(unsigned long);
/* Architecture specific copy of original instruction. */
struct arch_specific_insn {
kprobe_opcode_t *insn;
kprobe_insn_handler_t *insn_handler;
kprobe_check_cc *insn_check_cc;
};
struct prev_kprobe {

View File

@ -159,7 +159,7 @@ extern unsigned int user_debug;
#include <mach/barriers.h>
#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
#define mb() do { dsb(); outer_sync(); } while (0)
#define rmb() dmb()
#define rmb() dsb()
#define wmb() mb()
#else
#include <asm/memory.h>

View File

@ -396,6 +396,10 @@
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370)
#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371)
#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372)
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
/*
* The following SWIs are ARM private.

View File

@ -379,6 +379,10 @@
CALL(sys_fanotify_init)
CALL(sys_fanotify_mark)
CALL(sys_prlimit64)
/* 370 */ CALL(sys_name_to_handle_at)
CALL(sys_open_by_handle_at)
CALL(sys_clock_adjtime)
CALL(sys_syncfs)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

File diff suppressed because it is too large Load Diff

View File

@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
regs->ARM_pc += 4;
p->ainsn.insn_handler(p, regs);
if (p->ainsn.insn_check_cc(regs->ARM_cpsr))
p->ainsn.insn_handler(p, regs);
}
/*

View File

@ -746,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
tail = (struct frame_tail __user *)regs->ARM_fp - 1;
while (tail && !((unsigned long)tail & 0x3))
while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
tail && !((unsigned long)tail & 0x3))
tail = user_backtrace(tail, entry);
}

View File

@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request,
#ifdef CONFIG_HAVE_HW_BREAKPOINT
case PTRACE_GETHBPREGS:
if (ptrace_get_breakpoints(child) < 0)
return -ESRCH;
ret = ptrace_gethbpregs(child, addr,
(unsigned long __user *)data);
ptrace_put_breakpoints(child);
break;
case PTRACE_SETHBPREGS:
if (ptrace_get_breakpoints(child) < 0)
return -ESRCH;
ret = ptrace_sethbpregs(child, addr,
(unsigned long __user *)data);
ptrace_put_breakpoints(child);
break;
#endif

View File

@ -597,45 +597,19 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
return err;
}
static inline void setup_syscall_restart(struct pt_regs *regs)
{
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
}
/*
* OK, we're invoking a handler
*/
static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, int syscall)
struct pt_regs * regs)
{
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = current;
int usig = sig;
int ret;
/*
* If we were from a system call, check for system call restarting...
*/
if (syscall) {
switch (regs->ARM_r0) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ARM_r0 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ARM_r0 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
setup_syscall_restart(regs);
}
}
/*
* translate the signal
*/
@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
*/
static void do_signal(struct pt_regs *regs, int syscall)
{
unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
struct k_sigaction ka;
siginfo_t info;
int signr;
@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall)
if (!user_mode(regs))
return;
/*
* If we were from a system call, check for system call restarting...
*/
if (syscall) {
continue_addr = regs->ARM_pc;
restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
retval = regs->ARM_r0;
/*
* Prepare for system call restart. We do this here so that a
* debugger will see the already changed PSW.
*/
switch (retval) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc = restart_addr;
break;
case -ERESTART_RESTARTBLOCK:
regs->ARM_r0 = -EINTR;
break;
}
}
if (try_to_freeze())
goto no_signal;
/*
* Get the signal to deliver. When running under ptrace, at this
* point the debugger may change all our registers ...
*/
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
sigset_t *oldset;
/*
* Depending on the signal settings we may need to revert the
* decision to restart the system call. But skip this if a
* debugger has chosen to restart at a different PC.
*/
if (regs->ARM_pc == restart_addr) {
if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART))) {
regs->ARM_r0 = -EINTR;
regs->ARM_pc = continue_addr;
}
}
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall)
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
/*
* Handle restarting a different system call. As above,
* if a debugger has chosen to restart at a different PC,
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
&& regs->ARM_pc == continue_addr) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
regs->ARM_pc -= 2;
@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
#endif
}
}
if (regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR) {
setup_syscall_restart(regs);
}
/* If there's no signal to deliver, we just put the saved sigmask
* back.

View File

@ -479,7 +479,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
{
}
static void broadcast_timer_setup(struct clock_event_device *evt)
static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
{
evt->name = "dummy_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT |

View File

@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid,
long err;
int i;
if (nsops < 1)
if (nsops < 1 || nsops > SEMOPM)
return -EINVAL;
sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
if (!sops)

View File

@ -83,6 +83,7 @@ config ARCH_AT91CAP9
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_NET_MACB
config ARCH_AT572D940HF
bool "AT572D940HF"

View File

@ -30,6 +30,11 @@
#include <mach/board.h>
#include "generic.h"
static void __init at91eb01_init_irq(void)
{
at91x40_init_interrupts(NULL);
}
static void __init at91eb01_map_io(void)
{
at91x40_initialize(40000000);
@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void)
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.timer = &at91x40_timer,
.init_irq = at91x40_init_interrupts,
.init_irq = at91eb01_init_irq,
.map_io = at91eb01_map_io,
MACHINE_END

View File

@ -27,6 +27,7 @@
#define ARCH_ID_AT91SAM9G45 0x819b05a0
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
#define ARCH_EXID_AT91SAM9G46 0x00000003
#define ARCH_EXID_AT91SAM9G45 0x00000004
#define ARCH_EXID_AT91SAM9G15 0x00000000
#define ARCH_EXID_AT91SAM9G35 0x00000001
#define ARCH_EXID_AT91SAM9X35 0x00000002
#define ARCH_EXID_AT91SAM9G25 0x00000003
#define ARCH_EXID_AT91SAM9X25 0x00000004
static inline unsigned long at91_exid_identify(void)
{
return at91_sys_read(AT91_DBGU_EXID);
@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9m11() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9X5
#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \
(at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \
(at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \
(at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \
(at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \
(at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
#else
#define cpu_is_at91sam9x5() (0)
#define cpu_is_at91sam9g15() (0)
#define cpu_is_at91sam9g35() (0)
#define cpu_is_at91sam9x35() (0)
#define cpu_is_at91sam9g25() (0)
#define cpu_is_at91sam9x25() (0)
#endif
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)

View File

@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
select I2C
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
@ -72,6 +73,7 @@ config MACH_SFFSDR
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
select I2C
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM
select MACH_DAVINCI_DM6467TEVM
select MISC_DEVICES
select EEPROM_AT24
select I2C
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM
depends on ARCH_DAVINCI_DM365
select MISC_DEVICES
select EEPROM_AT24
select I2C
help
Configure this option to specify whether the board used
for development is a DM365 EVM
@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM
select GPIO_PCF857X
select MISC_DEVICES
select EEPROM_AT24
select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@ -205,6 +210,7 @@ config MACH_MITYOMAPL138
depends on ARCH_DAVINCI_DA850
select MISC_DEVICES
select EEPROM_AT24
select I2C
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at

View File

@ -29,7 +29,7 @@
#include <mach/mux.h>
#include <mach/spi.h>
#define MITYOMAPL138_PHY_ID "0:03"
#define MITYOMAPL138_PHY_ID ""
#define FACTORY_CONFIG_MAGIC 0x012C0138
#define FACTORY_CONFIG_VERSION 0x00010001
@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = {
static struct platform_device mityomapl138_nandflash_device = {
.name = "davinci_nand",
.id = 0,
.id = 1,
.dev = {
.platform_data = &mityomapl138_nandflash_data,
},

View File

@ -39,7 +39,8 @@
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
#define DA8XX_SPI0_BASE 0x01c41000
#define DA8XX_SPI1_BASE 0x01f0e000
#define DA830_SPI1_BASE 0x01e12000
#define DA850_SPI1_BASE 0x01f0e000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
static struct resource da8xx_spi1_resources[] = {
[0] = {
.start = DA8XX_SPI1_BASE,
.end = DA8XX_SPI1_BASE + SZ_4K - 1,
.start = DA830_SPI1_BASE,
.end = DA830_SPI1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
da8xx_spi_pdata[instance].num_chipselect = len;
if (instance == 1 && cpu_is_davinci_da850()) {
da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
}
return platform_device_register(&da8xx_spi_device[instance]);
}

View File

@ -314,7 +314,7 @@ static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
.usecount = 1, /* REVISIT: why can't' this be disabled? */
.usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk timer3_clk = {

View File

@ -274,7 +274,7 @@ static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
.usecount = 1, /* REVISIT: why can't' this be disabled? */
.usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk_lookup dm644x_clks[] = {

View File

@ -24,6 +24,9 @@
#define UART_SHIFT 2
#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
@ -34,7 +37,7 @@ davinci_uart_virt: .word 0
/* Use davinci_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =__virt_to_phys(davinci_uart_phys)
ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rp, =davinci_uart_phys
add \rv, \rp, #4 @ davinci_uart_virt
ldr \rp, [\rp, #0]
@ -48,18 +51,18 @@ davinci_uart_virt: .word 0
tst \rp, #1 @ MMU enabled?
/* Copy uart phys address from decompressor uart info */
ldreq \rv, =__virt_to_phys(davinci_uart_phys)
ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rv, =davinci_uart_phys
ldreq \rp, =DAVINCI_UART_INFO
ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #0]
str \rp, [\rv]
/* Copy uart virt address from decompressor uart info */
ldreq \rv, =__virt_to_phys(davinci_uart_virt)
ldreq \rv, =davinci_uart_v2p(davinci_uart_virt)
ldrne \rv, =davinci_uart_virt
ldreq \rp, =DAVINCI_UART_INFO
ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #4]
str \rp, [\rv]

View File

@ -22,7 +22,7 @@
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
*/
#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8)
#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8)
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)

View File

@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
static int vpr200_usbh_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id,
MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
}
/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY,
.init = vpr200_usbh_init,
.portsc = MXC_EHCI_MODE_SERIAL,
};
static struct platform_device *devices[] __initdata = {

View File

@ -193,7 +193,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
.wakeup = wake, \
}
static const struct gpio_keys_button loco_buttons[] __initconst = {
static struct gpio_keys_button loco_buttons[] = {
GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),

View File

@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
unsigned long diff, parent_rate, calc_rate; \
int i; \
\
parent_rate = clk_get_rate(clk->parent); \
div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
bm_busy = BM_CLKCTRL_##dr##_BUSY; \
\
if (clk->parent == &ref_xtal_clk) { \
parent_rate = clk_get_rate(clk->parent); \
div = DIV_ROUND_UP(parent_rate, rate); \
if (clk == &cpu_clk) { \
div_max = BM_CLKCTRL_CPU_DIV_XTAL >> \
@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
if (div == 0 || div > div_max) \
return -EINVAL; \
} else { \
/* \
* hack alert: this block modifies clk->parent, too, \
* so the base to use it the grand parent. \
*/ \
parent_rate = clk_get_rate(clk->parent->parent); \
rate >>= PARENT_RATE_SHIFT; \
parent_rate >>= PARENT_RATE_SHIFT; \
diff = parent_rate; \

View File

@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o += -DDEBUG

View File

@ -141,14 +141,19 @@ static void __init rx51_init(void)
static void __init rx51_map_io(void)
{
omap2_set_globals_3xxx();
rx51_video_mem_init();
omap34xx_map_common_io();
}
static void __init rx51_reserve(void)
{
rx51_video_mem_init();
omap_reserve();
}
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
.boot_params = 0x80000100,
.reserve = omap_reserve,
.reserve = rx51_reserve,
.map_io = rx51_map_io,
.init_early = rx51_init_early,
.init_irq = omap_init_irq,

View File

@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);
clk->rate = rate;
return 0;
}

View File

@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X),
CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X),
CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X),
CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X),
CLK("omapdss_dss", "fck", &dss_fck, CK_443X),
/*
* On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
* with OMAP2/3.
*/
CLK("omapdss_dss", "ick", &dummy_ck, CK_443X),
CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X),
CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
CLK(NULL, "emif2_fck", &emif2_fck, CK_443X),

View File

@ -247,6 +247,7 @@ struct omap3_cm_regs {
u32 per_cm_clksel;
u32 emu_cm_clksel;
u32 emu_cm_clkstctrl;
u32 pll_cm_autoidle;
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
@ -319,6 +320,15 @@ void omap3_cm_save_context(void)
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
cm_context.emu_cm_clkstctrl =
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
/*
* As per erratum i671, ROM code does not respect the PER DPLL
* programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
* In this case, even though this register has been saved in
* scratchpad contents, we need to restore AUTO_PERIPH_DPLL
* by ourselves. So, we need to save it anyway.
*/
cm_context.pll_cm_autoidle =
omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
cm_context.pll_cm_autoidle2 =
omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
cm_context.pll_cm_clksel4 =
@ -441,6 +451,13 @@ void omap3_cm_restore_context(void)
CM_CLKSEL1);
omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
OMAP2_CM_CLKSTCTRL);
/*
* As per erratum i671, ROM code does not respect the PER DPLL
* programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
* In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
*/
omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
CM_AUTOIDLE2);
omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,

View File

@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void)
omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
prcm_block_contents.cm_clken_pll =
omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
/*
* As per erratum i671, ROM code does not respect the PER DPLL
* programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
* Then, in anycase, clear these bits to avoid extra latencies.
*/
prcm_block_contents.cm_autoidle_pll =
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
~OMAP3430_AUTO_PERIPH_DPLL_MASK;
prcm_block_contents.cm_clksel1_pll =
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
prcm_block_contents.cm_clksel2_pll =

View File

@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
static struct omap_hwmod omap2420_gpio1_hwmod = {
.name = "gpio1",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs),
.main_clk = "gpios_fck",
@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
static struct omap_hwmod omap2420_gpio2_hwmod = {
.name = "gpio2",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs),
.main_clk = "gpios_fck",
@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
static struct omap_hwmod omap2420_gpio3_hwmod = {
.name = "gpio3",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs),
.main_clk = "gpios_fck",
@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
static struct omap_hwmod omap2420_gpio4_hwmod = {
.name = "gpio4",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap242x_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs),
.main_clk = "gpios_fck",
@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x4a0560ff,
.pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};

View File

@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
static struct omap_hwmod omap2430_gpio1_hwmod = {
.name = "gpio1",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs),
.main_clk = "gpios_fck",
@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
static struct omap_hwmod omap2430_gpio2_hwmod = {
.name = "gpio2",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs),
.main_clk = "gpios_fck",
@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
static struct omap_hwmod omap2430_gpio3_hwmod = {
.name = "gpio3",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs),
.main_clk = "gpios_fck",
@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
static struct omap_hwmod omap2430_gpio4_hwmod = {
.name = "gpio4",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs),
.main_clk = "gpios_fck",
@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
static struct omap_hwmod omap2430_gpio5_hwmod = {
.name = "gpio5",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio5_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs),
.main_clk = "gpio5_fck",
@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x4a0560ff,
.pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};

View File

@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
static struct omap_hwmod omap3xxx_gpio1_hwmod = {
.name = "gpio1",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio1_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs),
.main_clk = "gpio1_ick",
@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
static struct omap_hwmod omap3xxx_gpio2_hwmod = {
.name = "gpio2",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio2_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs),
.main_clk = "gpio2_ick",
@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
static struct omap_hwmod omap3xxx_gpio3_hwmod = {
.name = "gpio3",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio3_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs),
.main_clk = "gpio3_ick",
@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
static struct omap_hwmod omap3xxx_gpio4_hwmod = {
.name = "gpio4",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio4_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs),
.main_clk = "gpio4_ick",
@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
static struct omap_hwmod omap3xxx_gpio5_hwmod = {
.name = "gpio5",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio5_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs),
.main_clk = "gpio5_ick",
@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
static struct omap_hwmod omap3xxx_gpio6_hwmod = {
.name = "gpio6",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap3xxx_gpio6_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs),
.main_clk = "gpio6_ick",
@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x4a0560ff,
.pa_end = 0x48056fff,
.flags = ADDR_TYPE_RT
},
};

View File

@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
{
.pa_start = 0x4a056000,
.pa_end = 0x4a0560ff,
.pa_end = 0x4a056fff,
.flags = ADDR_TYPE_RT
},
};

View File

@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
/* No timeout error for debug sources */
}
base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source)));
/* identify the error source */
for (err_source = 0; !(status & (1 << err_source)); err_source++)
;
base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
error = omap3_l3_readll(base, L3_ERROR_LOG);
if (error) {

View File

@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void)
if (cpu_is_omap44xx()) {
_init_omap_device("l3_main_1", &l3_dev);
_init_omap_device("dsp", &dsp_dev);
_init_omap_device("iva", &iva_dev);
} else {
_init_omap_device("l3_main", &l3_dev);
}

View File

@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
sys_clk_speed /= 1000;
/* Generic voltage parameters */
vdd->curr_volt = 1200000;
vdd->volt_scale = vp_forceupdate_scale_voltage;
vdd->vp_enabled = false;

View File

@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,

View File

@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,

View File

@ -4,5 +4,5 @@
* operation to deadlock the system.
*/
#define mb() dsb()
#define rmb() dmb()
#define rmb() dsb()
#define wmb() mb()

View File

@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = {
.num_resources = 0,
};
static struct platform_device gta02_dfbmcs320_device = {
.name = "dfbmcs320",
};
static struct i2c_board_info gta02_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("pcf50633", 0x73),
@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = {
&s3c_device_iis,
&samsung_asoc_dma,
&s3c_device_i2c0,
&gta02_dfbmcs320_device,
&gta02_buttons_device,
&s3c_device_adc,
&s3c_device_ts,

View File

@ -23,7 +23,7 @@
#include <asm/outercache.h>
#define rmb() dmb()
#define rmb() dsb()
#define wmb() do { dsb(); outer_sync(); } while (0)
#define mb() wmb()

View File

@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
.irq = NOMADIK_GPIO_TO_IRQ(217),
.platform_data = &mop500_tc35892_data,
},
};
/* I2C0 devices only available prior to HREFv60 */
static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
/* I2C0 devices only available prior to HREFv60 */
{
I2C_BOARD_INFO("tps61052", 0x33),
.platform_data = &mop500_tps61052_data,
},
};
#define NUM_PRE_V60_I2C0_DEVICES 1
static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
{
/* lp5521 LED driver, 1st device */
@ -425,6 +424,8 @@ static void __init mop500_uart_init(void)
static void __init mop500_init_machine(void)
{
int i2c0_devs;
/*
* The HREFv60 board removed a GPIO expander and routed
* all these GPIO pins to the internal GPIO controller
@ -448,11 +449,11 @@ static void __init mop500_init_machine(void)
platform_device_register(&ab8500_device);
i2c_register_board_info(0, mop500_i2c0_devices,
ARRAY_SIZE(mop500_i2c0_devices));
if (!machine_is_hrefv60())
i2c_register_board_info(0, mop500_i2c0_old_devices,
ARRAY_SIZE(mop500_i2c0_old_devices));
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
if (machine_is_hrefv60())
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
}

View File

@ -392,7 +392,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
* Convert start_pfn/end_pfn to a struct page pointer.
*/
start_pg = pfn_to_page(start_pfn - 1) + 1;
end_pg = pfn_to_page(end_pfn);
end_pg = pfn_to_page(end_pfn - 1) + 1;
/*
* Convert to physical addresses, and
@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi)
bank_start = bank_pfn_start(bank);
#ifdef CONFIG_SPARSEMEM
/*
* Take care not to free memmap entries that don't exist
* due to SPARSEMEM sections which aren't present.
*/
bank_start = min(bank_start,
ALIGN(prev_bank_end, PAGES_PER_SECTION));
#endif
/*
* If we had a previous bank, and there is a space
* between the current bank and the previous, free it.
@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi)
*/
prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
}
#ifdef CONFIG_SPARSEMEM
if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
free_memmap(prev_bank_end,
ALIGN(prev_bank_end, PAGES_PER_SECTION));
#endif
}
static void __init free_highpages(void)

View File

@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area)
teq r2, #DMA_TO_DEVICE
beq xscale_dma_clean_range
b xscale_dma_flush_range
ENDPROC(xscsale_dma_a0_map_area)
ENDPROC(xscale_dma_a0_map_area)
/*
* dma_unmap_area(start, size, dir)

View File

@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
return 0;
}
/*
* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
{
int i, j;
@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
__raw_writel(~0, port[i].base + GPIO_ISR);
for (j = port[i].virtual_irq_start;
j < port[i].virtual_irq_start + 32; j++) {
irq_set_lockdep_class(j, &gpio_lock_class);
irq_set_chip_and_handler(j, &gpio_irq_chip,
handle_level_irq);
set_irq_flags(j, IRQF_VALID);

View File

@ -124,6 +124,8 @@ imx_ssi_fiq_start:
1:
@ return from FIQ
subs pc, lr, #4
.align
imx_ssi_fiq_base:
.word 0x0
imx_ssi_fiq_rx_buffer:

View File

@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
clk_enable(obj->clk);
errs = iommu_report_fault(obj, &da);
clk_disable(obj->clk);
if (errs == 0)
return IRQ_HANDLED;
/* Fault callback or TLB/PTE Dynamic loading */
if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv))

View File

@ -300,6 +300,8 @@ void __init paging_init(void)
zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
free_area_init_node(i, zones_size,
m68k_memory[i].addr >> PAGE_SHIFT, NULL);
if (node_present_pages(i))
node_set_state(i, N_NORMAL_MEMORY);
}
}

View File

@ -997,9 +997,6 @@ config IRQ_GT641XX
config IRQ_GIC
bool
config IRQ_CPU_OCTEON
bool
config MIPS_BOARDS_GEN
bool
@ -1359,8 +1356,6 @@ config CPU_SB1
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
select IRQ_CPU
select IRQ_CPU_OCTEON
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_SMP

View File

@ -127,13 +127,10 @@ const char *get_system_type(void)
void __init board_setup(void)
{
unsigned long bcsr1, bcsr2;
u32 pin_func;
bcsr1 = DB1000_BCSR_PHYS_ADDR;
bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
pin_func = 0;
#ifdef CONFIG_MIPS_DB1000
printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
@ -164,12 +161,16 @@ void __init board_setup(void)
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
/* Set IRFIRSEL instead of GPIO15 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
/* Power off until the driver is in use */
bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
BCSR_RESETS_IRDA_MODE_OFF);
{
u32 pin_func;
/* Set IRFIRSEL instead of GPIO15 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
/* Power off until the driver is in use */
bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
BCSR_RESETS_IRDA_MODE_OFF);
}
#endif
bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */
@ -177,31 +178,35 @@ void __init board_setup(void)
alchemy_gpio1_input_enable();
#ifdef CONFIG_MIPS_MIRAGE
/* GPIO[20] is output */
alchemy_gpio_direction_output(20, 0);
{
u32 pin_func;
/* Set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
/* GPIO[20] is output */
alchemy_gpio_direction_output(20, 0);
/* Set GPIO[215:211] for LEDs */
pin_func |= 5 << 2;
/* Set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
/* Set GPIO[214:213] for more LEDs */
pin_func |= 5 << 12;
/* Set GPIO[215:211] for LEDs */
pin_func |= 5 << 2;
/* Set GPIO[207:200] instead of PCMCIA/LCD */
pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
/* Set GPIO[214:213] for more LEDs */
pin_func |= 5 << 12;
/*
* Enable speaker amplifier. This should
* be part of the audio driver.
*/
alchemy_gpio_direction_output(209, 1);
/* Set GPIO[207:200] instead of PCMCIA/LCD */
pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
pm_power_off = mirage_power_off;
_machine_halt = mirage_power_off;
_machine_restart = (void(*)(char *))mips_softreset;
/*
* Enable speaker amplifier. This should
* be part of the audio driver.
*/
alchemy_gpio_direction_output(209, 1);
pm_power_off = mirage_power_off;
_machine_halt = mirage_power_off;
_machine_restart = (void(*)(char *))mips_softreset;
}
#endif
#ifdef CONFIG_MIPS_BOSPORUS

View File

@ -51,10 +51,9 @@ void __init prom_init(void)
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
memsize = 0x04000000;
else
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}

View File

@ -325,9 +325,7 @@ int __init ar7_gpio_init(void)
size = 0x1f;
}
gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
AR7_REGS_GPIO + 0x10);
gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
if (!gpch->regs) {
printk(KERN_ERR "%s: failed to ioremap regs\n",
gpch->chip.label);

View File

@ -16,8 +16,8 @@
int main(int argc, char *argv[])
{
unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
struct stat sb;
uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
if (argc != 3) {
fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n",

View File

@ -1,11 +1,7 @@
config CAVIUM_OCTEON_SPECIFIC_OPTIONS
bool "Enable Octeon specific options"
depends on CPU_CAVIUM_OCTEON
default "y"
if CPU_CAVIUM_OCTEON
config CAVIUM_CN63XXP1
bool "Enable CN63XXP1 errata worarounds"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "n"
help
The CN63XXP1 chip requires build time workarounds to
@ -16,7 +12,6 @@ config CAVIUM_CN63XXP1
config CAVIUM_OCTEON_2ND_KERNEL
bool "Build the kernel to be used as a 2nd kernel on the same chip"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "n"
help
This option configures this kernel to be linked at a different
@ -26,7 +21,6 @@ config CAVIUM_OCTEON_2ND_KERNEL
config CAVIUM_OCTEON_HW_FIX_UNALIGNED
bool "Enable hardware fixups of unaligned loads and stores"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Configure the Octeon hardware to automatically fix unaligned loads
@ -38,7 +32,6 @@ config CAVIUM_OCTEON_HW_FIX_UNALIGNED
config CAVIUM_OCTEON_CVMSEG_SIZE
int "Number of L1 cache lines reserved for CVMSEG memory"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
range 0 54
default 1
help
@ -50,7 +43,6 @@ config CAVIUM_OCTEON_CVMSEG_SIZE
config CAVIUM_OCTEON_LOCK_L2
bool "Lock often used kernel code in the L2"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Enable locking parts of the kernel into the L2 cache.
@ -93,7 +85,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_STATIC
depends on CPU_CAVIUM_OCTEON
config CAVIUM_OCTEON_HELPER
def_bool y
@ -107,6 +98,8 @@ config NEED_SG_DMA_LENGTH
config SWIOTLB
def_bool y
depends on CPU_CAVIUM_OCTEON
select IOMMU_HELPER
select NEED_SG_DMA_LENGTH
endif # CPU_CAVIUM_OCTEON

View File

@ -17,6 +17,6 @@
#define SMP_CACHE_SHIFT L1_CACHE_SHIFT
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#define __read_mostly __attribute__((__section__(".data.read_mostly")))
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
#endif /* _ASM_CACHE_H */

View File

@ -14,6 +14,9 @@
#ifndef __ASM_CEVT_R4K_H
#define __ASM_CEVT_R4K_H
#include <linux/clockchips.h>
#include <asm/time.h>
DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
void mips_event_handler(struct clock_event_device *dev);

View File

@ -5,7 +5,9 @@
#include <asm/cache.h>
#include <asm-generic/dma-coherent.h>
#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
#include <dma-coherence.h>
#endif
extern struct dma_map_ops *mips_dma_map_ops;

View File

@ -70,6 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
flush_tlb_mm(vma->vm_mm);
}
static inline int huge_pte_none(pte_t pte)

View File

@ -88,7 +88,7 @@ struct bcm_tag {
char kernel_crc[CRC_LEN];
/* 228-235: Unused at present */
char reserved1[8];
/* 236-239: CRC32 of header excluding tagVersion */
/* 236-239: CRC32 of header excluding last 20 bytes */
char header_crc[CRC_LEN];
/* 240-255: Unused at present */
char reserved2[16];

View File

@ -211,7 +211,7 @@ EXPORT_SYMBOL(vdma_free);
*/
int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size)
{
int first, pages, npages;
int first, pages;
if (laddr > 0xffffff) {
if (vdma_debug)
@ -228,8 +228,7 @@ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size)
return -EINVAL; /* invalid physical address */
}
npages = pages =
(((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
first = laddr >> 12;
if (vdma_debug)
printk("vdma_remap: first=%x, pages=%x\n", first, pages);

View File

@ -242,9 +242,7 @@ EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
{
uint32_t status;
status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
(void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);

View File

@ -89,7 +89,7 @@ static int jz4740_clockevent_set_next(unsigned long evt,
static struct clock_event_device jz4740_clockevent = {
.name = "jz4740-timer",
.features = CLOCK_EVT_FEAT_PERIODIC,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = jz4740_clockevent_set_next,
.set_mode = jz4740_clockevent_set_mode,
.rating = 200,

View File

@ -27,11 +27,13 @@ void jz4740_timer_enable_watchdog(void)
{
writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
}
EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog);
void jz4740_timer_disable_watchdog(void)
{
writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
}
EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog);
void __init jz4740_timer_init(void)
{

View File

@ -23,6 +23,7 @@
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */
#define JUMP_RANGE_MASK ((1UL << 28) - 1)
#define INSN_NOP 0x00000000 /* nop */
#define INSN_JAL(addr) \
@ -44,12 +45,12 @@ static inline void ftrace_dyn_arch_init_insns(void)
/* jal (ftrace_caller + 8), jump over the first two instruction */
buf = (u32 *)&insn_jal_ftrace_caller;
uasm_i_jal(&buf, (FTRACE_ADDR + 8));
uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* j ftrace_graph_caller */
buf = (u32 *)&insn_j_ftrace_graph_caller;
uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK);
#endif
}

View File

@ -540,8 +540,8 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
secure_computing(regs->regs[2]);
if (unlikely(current->audit_context) && entryexit)
audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
regs->regs[2]);
audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]),
-regs->regs[2]);
if (!(current->ptrace & PT_PTRACED))
goto out;

View File

@ -565,7 +565,7 @@ einval: li v0, -ENOSYS
sys sys_ioprio_get 2 /* 4315 */
sys sys_utimensat 4
sys sys_signalfd 3
sys sys_ni_syscall 0
sys sys_ni_syscall 0 /* was timerfd */
sys sys_eventfd 1
sys sys_fallocate 6 /* 4320 */
sys sys_timerfd_create 2

View File

@ -404,7 +404,7 @@ sys_call_table:
PTR sys_ioprio_get
PTR sys_utimensat /* 5275 */
PTR sys_signalfd
PTR sys_ni_syscall
PTR sys_ni_syscall /* was timerfd */
PTR sys_eventfd
PTR sys_fallocate
PTR sys_timerfd_create /* 5280 */

View File

@ -403,7 +403,7 @@ EXPORT(sysn32_call_table)
PTR sys_ioprio_get
PTR compat_sys_utimensat
PTR compat_sys_signalfd /* 6280 */
PTR sys_ni_syscall
PTR sys_ni_syscall /* was timerfd */
PTR sys_eventfd
PTR sys_fallocate
PTR sys_timerfd_create

View File

@ -522,7 +522,7 @@ sys_call_table:
PTR sys_ioprio_get /* 4315 */
PTR compat_sys_utimensat
PTR compat_sys_signalfd
PTR sys_ni_syscall
PTR sys_ni_syscall /* was timerfd */
PTR sys_eventfd
PTR sys32_fallocate /* 4320 */
PTR sys_timerfd_create

View File

@ -374,7 +374,8 @@ void __noreturn die(const char *str, struct pt_regs *regs)
unsigned long dvpret = dvpe();
#endif /* CONFIG_MIPS_MT_SMTC */
notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV);
if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
sig = 0;
console_verbose();
spin_lock_irq(&die_lock);
@ -383,9 +384,6 @@ void __noreturn die(const char *str, struct pt_regs *regs)
mips_mt_regdump(dvpret);
#endif /* CONFIG_MIPS_MT_SMTC */
if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
sig = 0;
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE);

Some files were not shown because too many files have changed in this diff Show More