spi: orion: Fix extended baud rates for each Armada SoCs

The commit df59fa7f4b "spi: orion: support armada extended baud
rates" made the assumptions that all the Armada SoCs supported the
same maximum frequency. However, according the hardware datasheet, the
maximum frequency supported by the Armada 370 SoC is tclk/4, for the
Armada XP, Armada 38x and Armada 39x SoCs the limitation is 50MHz and
for the Armada 375 it is tclk/15.

This patch introduces new compatible strings to handle all these
case. In order to be future proof a compatible was created for each
SoC even if currently some SoCs seem using the same IP.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Gregory CLEMENT 2015-05-26 11:44:43 +02:00 committed by Mark Brown
parent ce2f6ea1cb
commit 4dacccfac6
2 changed files with 50 additions and 5 deletions

View File

@ -1,7 +1,13 @@
Marvell Orion SPI device
Required properties:
- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi".
- compatible : should be on of the following:
- "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs
- "marvell,armada-370-spi", for the Armada 370 SoCs
- "marvell,armada-375-spi", for the Armada 375 SoCs
- "marvell,armada-380-spi", for the Armada 38x SoCs
- "marvell,armada-390-spi", for the Armada 39x SoCs
- "marvell,armada-xp-spi", for the Armada XP SoCs
- reg : offset and length of the register set for the device
- cell-index : Which of multiple SPI controllers is this.
Optional properties:

View File

@ -391,7 +391,7 @@ static const struct orion_spi_dev orion_spi_dev_data = {
.prescale_mask = ORION_SPI_CLK_PRESCALE_MASK,
};
static const struct orion_spi_dev armada_spi_dev_data = {
static const struct orion_spi_dev armada_370_spi_dev_data = {
.typ = ARMADA_SPI,
.min_divisor = 4,
.max_divisor = 1920,
@ -399,9 +399,46 @@ static const struct orion_spi_dev armada_spi_dev_data = {
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
};
static const struct orion_spi_dev armada_xp_spi_dev_data = {
.typ = ARMADA_SPI,
.max_hz = 50000000,
.max_divisor = 1920,
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
};
static const struct orion_spi_dev armada_375_spi_dev_data = {
.typ = ARMADA_SPI,
.min_divisor = 15,
.max_divisor = 1920,
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
};
static const struct of_device_id orion_spi_of_match_table[] = {
{ .compatible = "marvell,orion-spi", .data = &orion_spi_dev_data, },
{ .compatible = "marvell,armada-370-spi", .data = &armada_spi_dev_data, },
{
.compatible = "marvell,orion-spi",
.data = &orion_spi_dev_data,
},
{
.compatible = "marvell,armada-370-spi",
.data = &armada_370_spi_dev_data,
},
{
.compatible = "marvell,armada-375-spi",
.data = &armada_375_spi_dev_data,
},
{
.compatible = "marvell,armada-380-spi",
.data = &armada_xp_spi_dev_data,
},
{
.compatible = "marvell,armada-390-spi",
.data = &armada_xp_spi_dev_data,
},
{
.compatible = "marvell,armada-xp-spi",
.data = &armada_xp_spi_dev_data,
},
{}
};
MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
@ -473,9 +510,11 @@ static int orion_spi_probe(struct platform_device *pdev)
"marvell,armada-370-spi"))
master->max_speed_hz = min(devdata->max_hz,
DIV_ROUND_UP(tclk_hz, devdata->min_divisor));
else
else if (devdata->min_divisor)
master->max_speed_hz =
DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
else
master->max_speed_hz = devdata->max_hz;
master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);