OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Gemini DTS updates for v4.21: 

- Fix the erroneous partition table on D-Link DIR-685
 - Multiplex flash usage with other usage using pin control
   handling (merged to the MTD tree)
 - Use the RedBoot partition parser on SQ201
 - Add the USB blocks (DT bindings merged in the last merge
   window)
 - Bump the debounce times a bit to avoid bouncing
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcDEUHAAoJEEEQszewGV1zL38P/3QWEx2xK/2kvdXYfe/QowXg
 akdF1MgQ+0MH+fsA2TWbuRUL1yB+u9m7Vhy8CNsEu3w68Er6owcEuYu36crZjDDS
 8SymYJPQ9GUrrt+EAJ2OoxVcV+qoLJdWKnf3fbM6dNJxSzpxbsSmvT+8DomZTGd1
 VF5lGZdWNw1EMaj6W6o9fGnq03Yc7lBKFXLq0p1WOorYeogBN5VG3Yr4dCwUtJBM
 yG3XIGc+LpNgYlCTKfuiQu/DSA1Cd5VV4tx6+r/+Q2nf8JlmY1fGxUte1RiDoYHz
 a6g7UWRuercNoyA1C/CwXNmwRxmOBKpwL8ES8ZD5zFWDDM2uWNX6snflpNfyT/fN
 Wt2QZot+jcSutDBhpbWwVhKNW2EL6VtJhvUTTcDWVP7PxC/TXdRX0SZoH1xw53HK
 sooHcEBAnm05fQhCsohVxKzsIwXXhl/TTFW9Y38bE4BZ9Oy41fzuthLN59xJJest
 ZlN/vqkJ2rMiV5z/xaxV83Jeg4TOqDhlN7kMHwktw9nOqGfQzPCUY4F0/R3vyD4o
 Gigw0gY+8Od5PoAWVi5qIoOb08rXGOK1yRzXnaj4lTfOk2VOb7BM0sxUAzkWlaV4
 oEgVimWePfqYZNYluIbk9yuXxzDu1t+pwW64OfOmpnh6Rx1m/9mQUHFEF5AV57GE
 HlQ5XPFWsKTirdEhSarr
 =LrYy
 -----END PGP SIGNATURE-----

Merge tag 'gemini-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Gemini DTS updates for v4.21:
- Fix the erroneous partition table on D-Link DIR-685
- Multiplex flash usage with other usage using pin control
  handling (merged to the MTD tree)
- Use the RedBoot partition parser on SQ201
- Add the USB blocks (DT bindings merged in the last merge
  window)
- Bump the debounce times a bit to avoid bouncing

* tag 'gemini-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Bump Gemini platforms to use 100ms debounce
  ARM: dts: Add the FOTG210 USB host to Gemini boards
  ARM: dts: Fix up SQ201 flash access
  ARM: dts: Enable Gemini flash access
  ARM: dts: Fix up the D-Link DIR-685 MTD partition info

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2018-12-12 14:01:03 -08:00
parent 69c5f266d8 f18fd0f560
commit 4f474037cf
9 changed files with 161 additions and 76 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
arch/arm/boot/dts/gemini-dlink-dir-685.dts
View File

@ -28,7 +28,7 @@
compatible = "gpio-keys";
button-esc {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";
@ -36,7 +36,7 @@
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
button-eject {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_EJECTCD>;
label = "unmount";
@ -64,7 +64,6 @@
gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
/* Collides with pflash CE1, not so cool */
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
@ -253,15 +252,18 @@
soc {
flash@30000000 {
/*
* Flash access is by default disabled, because it
* collides with the Chip Enable signal for the display
* panel, that reuse the parallel flash Chip Select 1
* (CS1). Enabling flash makes graphics stop working.
*
* We might be able to hack around this by letting
* GPIO poke around in the flash controller registers.
* Flash access collides with the Chip Enable signal for
* the display panel, that reuse the parallel flash Chip
* Select 1 (CS1). We switch the pin control state so we
* enable these pins for flash access only when we need
* then, and when disabled they can be used for GPIO which
* is what the display panel needs.
*/
/* status = "okay"; */
status = "okay";
pinctrl-names = "enabled", "disabled";
pinctrl-0 = <&pflash_default_pins>;
pinctrl-1 = <&pflash_disabled_pins>;
/* 32MB of flash */
reg = <0x30000000 0x02000000>;
@ -274,20 +276,16 @@
read-only;
};
/*
* Between the boot loader and the rootfs is the kernel
* in a custom Storlink format flashed from the boot
* menu. The rootfs is in squashfs format.
* This firmware image contains the kernel catenated
* with the squashfs root filesystem. For some reason
* this is called "upgrade" on the vendor system.
*/
partition@1800c0 {
label = "rootfs";
reg = <0x001800c0 0x01dbff40>;
read-only;
};
partition@1f40000 {
partition@40000 {
label = "upgrade";
reg = <0x01f40000 0x00040000>;
reg = <0x00040000 0x01f40000>;
read-only;
};
/* RGDB, Residental Gateway Database? */
partition@1f80000 {
label = "rgdb";
reg = <0x01f80000 0x00040000>;
@ -331,7 +329,6 @@
"gpio0cgrp",
"gpio0egrp",
"gpio0fgrp",
"gpio0ggrp",
"gpio0hgrp";
};
};
@ -346,6 +343,18 @@
groups = "gpio1bgrp";
};
};
/*
* These GPIO groups will be mapped in over some
* of the flash pins when the flash is not in
* active use.
*/
pflash_disabled_pins: pinctrl-pflash-disabled {
mux {
function = "gpio0";
groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
"gpio0kgrp";
};
};
pinctrl-gmii {
mux {
function = "gmii";
@ -434,7 +443,7 @@
};
display-controller@6a000000 {
status = "okay";
status = "disabled";
port@0 {
reg = <0>;
@ -443,5 +452,13 @@
};
};
};
usb@68000000 {
status = "okay";
};
usb@69000000 {
status = "okay";
};
};
};

2
arch/arm/boot/dts/gemini-dlink-dns-313.dts
View File

@ -34,7 +34,7 @@
compatible = "gpio-keys";
button-esc {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";

12
arch/arm/boot/dts/gemini-nas4220b.dts
View File

@ -28,7 +28,7 @@
compatible = "gpio-keys";
button-setup {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Backup button";
@ -36,7 +36,7 @@
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
};
button-restart {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_RESTART>;
label = "Softreset button";
@ -204,5 +204,13 @@
ata@63400000 {
status = "okay";
};
usb@68000000 {
status = "okay";
};
usb@69000000 {
status = "okay";
};
};
};

22
arch/arm/boot/dts/gemini-rut1xx.dts
View File

@ -28,7 +28,7 @@
compatible = "gpio-keys";
button-setup {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Reset to defaults";
@ -124,5 +124,25 @@
/* Not used in this platform */
};
};
ethernet@60000000 {
status = "okay";
ethernet-port@0 {
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet-port@1 {
/* Not used in this platform */
};
};
usb@68000000 {
status = "okay";
};
usb@69000000 {
status = "okay";
};
};
};

8
arch/arm/boot/dts/gemini-sl93512r.dts
View File

@ -324,5 +324,13 @@
ata@63400000 {
status = "okay";
};
usb@68000000 {
status = "okay";
};
usb@69000000 {
status = "okay";
};
};
};

78
arch/arm/boot/dts/gemini-sq201.dts
View File

@ -20,7 +20,7 @@
};
chosen {
bootargs = "console=ttyS0,115200n8";
bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
stdout-path = &uart0;
};
@ -28,7 +28,7 @@
compatible = "gpio-keys";
button-setup {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "factory reset";
@ -41,14 +41,12 @@
compatible = "gpio-leds";
led-green-info {
label = "sq201:green:info";
/* Conflict with parallel flash */
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-green-usb {
label = "sq201:green:usb";
/* Conflict with parallel and NAND flash */
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "usb-host";
@ -126,49 +124,17 @@
soc {
flash@30000000 {
/*
* Flash access can be enabled, with the side effect
* of disabling access to GPIO LED on GPIO0[20] which
* reuse one of the parallel flash chip select lines.
* Also the default firmware on the machine has the
* problem that since it uses the flash, the two LEDS
* on the right become numb.
*/
/* status = "okay"; */
status = "okay";
pinctrl-names = "enabled", "disabled";
pinctrl-0 = <&pflash_default_pins>;
pinctrl-1 = <&pflash_disabled_pins>;
/* 16MB of flash */
reg = <0x30000000 0x01000000>;
partition@0 {
label = "RedBoot";
reg = <0x00000000 0x00120000>;
read-only;
};
partition@120000 {
label = "Kernel";
reg = <0x00120000 0x00200000>;
};
partition@320000 {
label = "Ramdisk";
reg = <0x00320000 0x00600000>;
};
partition@920000 {
label = "Application";
reg = <0x00920000 0x00600000>;
};
partition@f20000 {
label = "VCTL";
reg = <0x00f20000 0x00020000>;
read-only;
};
partition@f40000 {
label = "CurConf";
reg = <0x00f40000 0x000a0000>;
read-only;
};
partition@fe0000 {
label = "FIS directory";
reg = <0x00fe0000 0x00020000>;
read-only;
partitions {
compatible = "redboot-fis";
/* Eraseblock at 0xfe0000 */
fis-index-block = <0x1fc>;
};
};
@ -184,9 +150,7 @@
mux {
function = "gpio0";
groups = "gpio0fgrp",
"gpio0ggrp",
"gpio0hgrp",
"gpio0kgrp";
"gpio0hgrp";
};
};
/*
@ -199,6 +163,18 @@
groups = "gpio1dgrp";
};
};
/*
* These GPIO groups will be mapped in over some
* of the flash pins when the flash is not in
* active use.
*/
pflash_disabled_pins: pinctrl-pflash-disabled {
mux {
function = "gpio0";
groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
"gpio0kgrp";
};
};
pinctrl-gmii {
mux {
function = "gmii";
@ -316,5 +292,13 @@
ata@63000000 {
status = "okay";
};
usb@68000000 {
status = "okay";
};
usb@69000000 {
status = "okay";
};
};
};

10
arch/arm/boot/dts/gemini-wbd111.dts
View File

@ -29,7 +29,7 @@
compatible = "gpio-keys";
button-setup {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
@ -171,5 +171,13 @@
/* Not used in this platform */
};
};
usb@68000000 {
status = "okay";
};
usb@69000000 {
status = "okay";
};
};
};

10
arch/arm/boot/dts/gemini-wbd222.dts
View File

@ -28,7 +28,7 @@
compatible = "gpio-keys";
button-setup {
debounce-interval = <50>;
debounce-interval = <100>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
@ -183,5 +183,13 @@
phy-handle = <&phy1>;
};
};
usb@68000000 {
status = "okay";
};
usb@69000000 {
status = "okay";
};
};
};

32
arch/arm/boot/dts/gemini.dtsi
View File

@ -409,5 +409,37 @@
#size-cells = <0>;
status = "disabled";
};
usb@68000000 {
compatible = "cortina,gemini-usb", "faraday,fotg210";
reg = <0x68000000 0x1000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_USB0>;
clocks = <&syscon GEMINI_CLK_GATE_USB0>;
clock-names = "PCLK";
/*
* This will claim pins for USB0 and USB1 at the same
* time as they are using some common pins. If you for
* some reason have a system using USB1 at 96000000 but
* NOT using USB0 at 68000000 you wll have to add the
* usb_default_pins to the USB controller at 96000000
* in your .dts for the board.
*/
pinctrl-names = "default";
pinctrl-0 = <&usb_default_pins>;
syscon = <&syscon>;
status = "disabled";
};
usb@69000000 {
compatible = "cortina,gemini-usb", "faraday,fotg210";
reg = <0x69000000 0x1000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_USB1>;
clocks = <&syscon GEMINI_CLK_GATE_USB1>;
clock-names = "PCLK";
syscon = <&syscon>;
status = "disabled";
};
};
};