diff --git a/Documentation/devicetree/bindings/mfd/s2mpa01.txt b/Documentation/devicetree/bindings/mfd/s2mpa01.txt
new file mode 100644
index 000000000000..c13d3d8c3947
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/s2mpa01.txt
@@ -0,0 +1,90 @@
+
+* Samsung S2MPA01 Voltage and Current Regulator
+
+The Samsung S2MPA01 is a multi-function device which includes high
+efficiency buck converters including Dual-Phase buck converter, various LDOs,
+and an RTC. It is interfaced to the host controller using an I2C interface.
+Each sub-block is addressed by the host system using different I2C slave
+addresses.
+
+Required properties:
+- compatible: Should be "samsung,s2mpa01-pmic".
+- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from s2mpa01 are delivered to.
+- interrupts: An interrupt specifier for the sole interrupt generated by the
+  device.
+
+Optional nodes:
+- regulators: The regulators of s2mpa01 that have to be instantiated should be
+  included in a sub-node named 'regulators'. Regulator nodes and constraints
+  included in this sub-node use the standard regulator bindings which are
+  documented elsewhere.
+
+Properties for BUCK regulator nodes:
+- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
+  (default), 25000, or 50000. May be 0 for disabling the ramp delay on
+  BUCK{1,2,3,4}.
+
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+  NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
+  for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
+
+  The following BUCKs share ramp settings:
+  * 1 and 6
+  * 2 and 4
+  * 8, 9, and 10
+
+The following are the names of the regulators that the s2mpa01 PMIC block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s2mpa01.
+
+	- LDOn
+		  - valid values for n are 1 to 26
+		  - Example: LDO1, LD02, LDO26
+	- BUCKn
+		  - valid values for n are 1 to 10.
+		  - Example: BUCK1, BUCK2, BUCK9
+
+Example:
+
+	s2mpa01_pmic@66 {
+		compatible = "samsung,s2mpa01-pmic";
+		reg = <0x66>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 714e2135210e..281a82747275 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -26,7 +26,9 @@
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/rtc.h>
+#include <linux/mfd/samsung/s2mpa01.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/regmap.h>
@@ -69,18 +71,53 @@ static const struct mfd_cell s2mps11_devs[] = {
 	}
 };
 
+static const struct mfd_cell s2mps14_devs[] = {
+	{
+		.name = "s2mps14-pmic",
+	}, {
+		.name = "s2mps14-rtc",
+	}, {
+		.name = "s2mps14-clk",
+	}
+};
+
+static const struct mfd_cell s2mpa01_devs[] = {
+	{
+		.name = "s2mpa01-pmic",
+	},
+};
+
 #ifdef CONFIG_OF
 static struct of_device_id sec_dt_match[] = {
 	{	.compatible = "samsung,s5m8767-pmic",
 		.data = (void *)S5M8767X,
-	},
-	{	.compatible = "samsung,s2mps11-pmic",
+	}, {
+		.compatible = "samsung,s2mps11-pmic",
 		.data = (void *)S2MPS11X,
+	}, {
+		.compatible = "samsung,s2mps14-pmic",
+		.data = (void *)S2MPS14X,
+	}, {
+		.compatible = "samsung,s2mpa01-pmic",
+		.data = (void *)S2MPA01,
+	}, {
+		/* Sentinel */
 	},
-	{},
 };
 #endif
 
+static bool s2mpa01_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S2MPA01_REG_INT1M:
+	case S2MPA01_REG_INT2M:
+	case S2MPA01_REG_INT3M:
+		return false;
+	default:
+		return true;
+	}
+}
+
 static bool s2mps11_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -111,6 +148,15 @@ static const struct regmap_config sec_regmap_config = {
 	.val_bits = 8,
 };
 
+static const struct regmap_config s2mpa01_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPA01_REG_LDO_OVCB4,
+	.volatile_reg = s2mpa01_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s2mps11_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -120,6 +166,15 @@ static const struct regmap_config s2mps11_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mps14_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS14_REG_LDODSCH3,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s5m8763_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -138,9 +193,18 @@ static const struct regmap_config s5m8767_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
-static const struct regmap_config sec_rtc_regmap_config = {
+static const struct regmap_config s5m_rtc_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+
+	.max_register = SEC_RTC_REG_MAX,
+};
+
+static const struct regmap_config s2mps14_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS_RTC_REG_MAX,
 };
 
 #ifdef CONFIG_OF
@@ -180,24 +244,24 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
 }
 #endif
 
-static inline int sec_i2c_get_driver_data(struct i2c_client *i2c,
+static inline unsigned long sec_i2c_get_driver_data(struct i2c_client *i2c,
 						const struct i2c_device_id *id)
 {
 #ifdef CONFIG_OF
 	if (i2c->dev.of_node) {
 		const struct of_device_id *match;
 		match = of_match_node(sec_dt_match, i2c->dev.of_node);
-		return (int)match->data;
+		return (unsigned long)match->data;
 	}
 #endif
-	return (int)id->driver_data;
+	return id->driver_data;
 }
 
 static int sec_pmic_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
 	struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
-	const struct regmap_config *regmap;
+	const struct regmap_config *regmap, *regmap_rtc;
 	struct sec_pmic_dev *sec_pmic;
 	int ret;
 
@@ -229,17 +293,34 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	}
 
 	switch (sec_pmic->device_type) {
+	case S2MPA01:
+		regmap = &s2mpa01_regmap_config;
+		break;
 	case S2MPS11X:
 		regmap = &s2mps11_regmap_config;
+		/*
+		 * The rtc-s5m driver does not support S2MPS11 and there
+		 * is no mfd_cell for S2MPS11 RTC device.
+		 * However we must pass something to devm_regmap_init_i2c()
+		 * so use S5M-like regmap config even though it wouldn't work.
+		 */
+		regmap_rtc = &s5m_rtc_regmap_config;
+		break;
+	case S2MPS14X:
+		regmap = &s2mps14_regmap_config;
+		regmap_rtc = &s2mps14_rtc_regmap_config;
 		break;
 	case S5M8763X:
 		regmap = &s5m8763_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	case S5M8767X:
 		regmap = &s5m8767_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	default:
 		regmap = &sec_regmap_config;
+		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	}
 
@@ -252,10 +333,13 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	}
 
 	sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
+	if (!sec_pmic->rtc) {
+		dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n");
+		return -ENODEV;
+	}
 	i2c_set_clientdata(sec_pmic->rtc, sec_pmic);
 
-	sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc,
-			&sec_rtc_regmap_config);
+	sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc);
 	if (IS_ERR(sec_pmic->regmap_rtc)) {
 		ret = PTR_ERR(sec_pmic->regmap_rtc);
 		dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
@@ -283,10 +367,18 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
 				      ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
 		break;
+	case S2MPA01:
+		ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
+				      ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
+		break;
 	case S2MPS11X:
 		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
 				      ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
 		break;
+	case S2MPS14X:
+		ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
+				      ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
+		break;
 	default:
 		/* If this happens the probe function is problem */
 		BUG();
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 4de494f51d40..64e7913aadc6 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -1,7 +1,7 @@
 /*
  * sec-irq.c
  *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -19,6 +19,7 @@
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
 
@@ -59,14 +60,14 @@ static const struct regmap_irq s2mps11_irqs[] = {
 		.reg_offset = 1,
 		.mask = S2MPS11_IRQ_RTC60S_MASK,
 	},
+	[S2MPS11_IRQ_RTCA0] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA0_MASK,
+	},
 	[S2MPS11_IRQ_RTCA1] = {
 		.reg_offset = 1,
 		.mask = S2MPS11_IRQ_RTCA1_MASK,
 	},
-	[S2MPS11_IRQ_RTCA2] = {
-		.reg_offset = 1,
-		.mask = S2MPS11_IRQ_RTCA2_MASK,
-	},
 	[S2MPS11_IRQ_SMPL] = {
 		.reg_offset = 1,
 		.mask = S2MPS11_IRQ_SMPL_MASK,
@@ -89,6 +90,76 @@ static const struct regmap_irq s2mps11_irqs[] = {
 	},
 };
 
+static const struct regmap_irq s2mps14_irqs[] = {
+	[S2MPS14_IRQ_PWRONF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONF_MASK,
+	},
+	[S2MPS14_IRQ_PWRONR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRONR_MASK,
+	},
+	[S2MPS14_IRQ_JIGONBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBF_MASK,
+	},
+	[S2MPS14_IRQ_JIGONBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_JIGONBR_MASK,
+	},
+	[S2MPS14_IRQ_ACOKBF] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBF_MASK,
+	},
+	[S2MPS14_IRQ_ACOKBR] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_ACOKBR_MASK,
+	},
+	[S2MPS14_IRQ_PWRON1S] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_PWRON1S_MASK,
+	},
+	[S2MPS14_IRQ_MRB] = {
+		.reg_offset = 0,
+		.mask = S2MPS11_IRQ_MRB_MASK,
+	},
+	[S2MPS14_IRQ_RTC60S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC60S_MASK,
+	},
+	[S2MPS14_IRQ_RTCA1] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA1_MASK,
+	},
+	[S2MPS14_IRQ_RTCA0] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTCA0_MASK,
+	},
+	[S2MPS14_IRQ_SMPL] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_SMPL_MASK,
+	},
+	[S2MPS14_IRQ_RTC1S] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_RTC1S_MASK,
+	},
+	[S2MPS14_IRQ_WTSR] = {
+		.reg_offset = 1,
+		.mask = S2MPS11_IRQ_WTSR_MASK,
+	},
+	[S2MPS14_IRQ_INT120C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT120C_MASK,
+	},
+	[S2MPS14_IRQ_INT140C] = {
+		.reg_offset = 2,
+		.mask = S2MPS11_IRQ_INT140C_MASK,
+	},
+	[S2MPS14_IRQ_TSD] = {
+		.reg_offset = 2,
+		.mask = S2MPS14_IRQ_TSD_MASK,
+	},
+};
 
 static const struct regmap_irq s5m8767_irqs[] = {
 	[S5M8767_IRQ_PWRR] = {
@@ -246,6 +317,16 @@ static const struct regmap_irq_chip s2mps11_irq_chip = {
 	.ack_base = S2MPS11_REG_INT1,
 };
 
+static const struct regmap_irq_chip s2mps14_irq_chip = {
+	.name = "s2mps14",
+	.irqs = s2mps14_irqs,
+	.num_irqs = ARRAY_SIZE(s2mps14_irqs),
+	.num_regs = 3,
+	.status_base = S2MPS14_REG_INT1,
+	.mask_base = S2MPS14_REG_INT1M,
+	.ack_base = S2MPS14_REG_INT1,
+};
+
 static const struct regmap_irq_chip s5m8767_irq_chip = {
 	.name = "s5m8767",
 	.irqs = s5m8767_irqs,
@@ -297,6 +378,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 				  sec_pmic->irq_base, &s2mps11_irq_chip,
 				  &sec_pmic->irq_data);
 		break;
+	case S2MPS14X:
+		ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
+				  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				  sec_pmic->irq_base, &s2mps14_irq_chip,
+				  &sec_pmic->irq_data);
+		break;
 	default:
 		dev_err(sec_pmic->dev, "Unknown device type %d\n",
 			sec_pmic->device_type);
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6a7932822e37..8f8e6710bb45 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -416,6 +416,13 @@ config REGULATOR_RC5T583
 	  through regulator interface. The device supports multiple DCDC/LDO
 	  outputs which can be controlled by i2c communication.
 
+config REGULATOR_S2MPA01
+	tristate "Samsung S2MPA01 voltage regulator"
+	depends on MFD_SEC_CORE
+	help
+	 This driver controls Samsung S2MPA01 voltage output regulator
+	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
+
 config REGULATOR_S2MPS11
 	tristate "Samsung S2MPS11 voltage regulator"
 	depends on MFD_SEC_CORE
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 979f9ddcf259..b3ece84289cf 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
+obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
new file mode 100644
index 000000000000..808b3aa7a42c
--- /dev/null
+++ b/drivers/regulator/s2mpa01.c
@@ -0,0 +1,481 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd
+ *		http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mpa01.h>
+
+#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
+
+struct s2mpa01_info {
+	int ramp_delay24;
+	int ramp_delay3;
+	int ramp_delay5;
+	int ramp_delay16;
+	int ramp_delay7;
+	int ramp_delay8910;
+};
+
+static int get_ramp_delay(int ramp_delay)
+{
+	unsigned char cnt = 0;
+
+	ramp_delay /= 6250;
+
+	while (true) {
+		ramp_delay = ramp_delay >> 1;
+		if (ramp_delay == 0)
+			break;
+		cnt++;
+	}
+
+	if (cnt > 3)
+		cnt = 3;
+
+	return cnt;
+}
+
+static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+				   unsigned int old_selector,
+				   unsigned int new_selector)
+{
+	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
+	unsigned int ramp_delay = 0;
+	int old_volt, new_volt;
+
+	switch (rdev->desc->id) {
+	case S2MPA01_BUCK2:
+	case S2MPA01_BUCK4:
+		ramp_delay = s2mpa01->ramp_delay24;
+		break;
+	case S2MPA01_BUCK3:
+		ramp_delay = s2mpa01->ramp_delay3;
+		break;
+	case S2MPA01_BUCK5:
+		ramp_delay = s2mpa01->ramp_delay5;
+		break;
+	case S2MPA01_BUCK1:
+	case S2MPA01_BUCK6:
+		ramp_delay = s2mpa01->ramp_delay16;
+		break;
+	case S2MPA01_BUCK7:
+		ramp_delay = s2mpa01->ramp_delay7;
+		break;
+	case S2MPA01_BUCK8:
+	case S2MPA01_BUCK9:
+	case S2MPA01_BUCK10:
+		ramp_delay = s2mpa01->ramp_delay8910;
+		break;
+	}
+
+	if (ramp_delay == 0)
+		ramp_delay = rdev->desc->ramp_delay;
+
+	old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
+	new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
+
+	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+}
+
+static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+	struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
+	unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
+	unsigned int ramp_enable = 1, enable_shift = 0;
+	int ret;
+
+	switch (rdev->desc->id) {
+	case S2MPA01_BUCK1:
+		enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		if (ramp_delay > s2mpa01->ramp_delay16)
+			s2mpa01->ramp_delay16 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay16;
+
+		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
+		ramp_reg = S2MPA01_REG_RAMP1;
+		break;
+	case S2MPA01_BUCK2:
+		enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		if (ramp_delay > s2mpa01->ramp_delay24)
+			s2mpa01->ramp_delay24 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay24;
+
+		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
+		ramp_reg = S2MPA01_REG_RAMP1;
+		break;
+	case S2MPA01_BUCK3:
+		enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		s2mpa01->ramp_delay3 = ramp_delay;
+		ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
+		ramp_reg = S2MPA01_REG_RAMP1;
+		break;
+	case S2MPA01_BUCK4:
+		enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
+		if (!ramp_delay) {
+			ramp_enable = 0;
+			break;
+		}
+
+		if (ramp_delay > s2mpa01->ramp_delay24)
+			s2mpa01->ramp_delay24 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay24;
+
+		ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
+		ramp_reg = S2MPA01_REG_RAMP1;
+		break;
+	case S2MPA01_BUCK5:
+		s2mpa01->ramp_delay5 = ramp_delay;
+		ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
+		break;
+	case S2MPA01_BUCK6:
+		if (ramp_delay > s2mpa01->ramp_delay16)
+			s2mpa01->ramp_delay16 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay16;
+
+		ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
+		break;
+	case S2MPA01_BUCK7:
+		s2mpa01->ramp_delay7 = ramp_delay;
+		ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
+		break;
+	case S2MPA01_BUCK8:
+	case S2MPA01_BUCK9:
+	case S2MPA01_BUCK10:
+		if (ramp_delay > s2mpa01->ramp_delay8910)
+			s2mpa01->ramp_delay8910 = ramp_delay;
+		else
+			ramp_delay = s2mpa01->ramp_delay8910;
+
+		ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
+		break;
+	default:
+		return 0;
+	}
+
+	if (!ramp_enable)
+		goto ramp_disable;
+
+	if (enable_shift) {
+		ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+					1 << enable_shift, 1 << enable_shift);
+		if (ret) {
+			dev_err(&rdev->dev, "failed to enable ramp rate\n");
+			return ret;
+		}
+	}
+
+	ramp_val = get_ramp_delay(ramp_delay);
+
+	return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
+				  ramp_val << ramp_shift);
+
+ramp_disable:
+	return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+				  1 << enable_shift, 0);
+}
+
+static struct regulator_ops s2mpa01_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops s2mpa01_buck_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= s2mpa01_regulator_set_voltage_time_sel,
+	.set_ramp_delay		= s2mpa01_set_ramp_delay,
+};
+
+#define regulator_desc_ldo1(num)	{		\
+	.name		= "LDO"#num,			\
+	.id		= S2MPA01_LDO##num,		\
+	.ops		= &s2mpa01_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= S2MPA01_LDO_MIN,		\
+	.uV_step	= S2MPA01_LDO_STEP1,		\
+	.n_voltages	= S2MPA01_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
+	.vsel_mask	= S2MPA01_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
+	.enable_mask	= S2MPA01_ENABLE_MASK		\
+}
+#define regulator_desc_ldo2(num)	{		\
+	.name		= "LDO"#num,			\
+	.id		= S2MPA01_LDO##num,		\
+	.ops		= &s2mpa01_ldo_ops,		\
+	.type		= REGULATOR_VOLTAGE,		\
+	.owner		= THIS_MODULE,			\
+	.min_uV		= S2MPA01_LDO_MIN,		\
+	.uV_step	= S2MPA01_LDO_STEP2,		\
+	.n_voltages	= S2MPA01_LDO_N_VOLTAGES,	\
+	.vsel_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
+	.vsel_mask	= S2MPA01_LDO_VSEL_MASK,	\
+	.enable_reg	= S2MPA01_REG_L1CTRL + num - 1,	\
+	.enable_mask	= S2MPA01_ENABLE_MASK		\
+}
+
+#define regulator_desc_buck1_4(num)	{			\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPA01_BUCK##num,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPA01_BUCK_MIN1,			\
+	.uV_step	= S2MPA01_BUCK_STEP1,			\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B1CTRL2 + (num - 1) * 2,	\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B1CTRL1 + (num - 1) * 2,	\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+#define regulator_desc_buck5	{				\
+	.name		= "BUCK5",				\
+	.id		= S2MPA01_BUCK5,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPA01_BUCK_MIN2,			\
+	.uV_step	= S2MPA01_BUCK_STEP1,			\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B5CTRL2,			\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B5CTRL1,			\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+#define regulator_desc_buck6_7(num)	{			\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPA01_BUCK##num,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPA01_BUCK_MIN1,			\
+	.uV_step	= S2MPA01_BUCK_STEP1,			\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B6CTRL2 + (num - 6) * 2,	\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B6CTRL1 + (num - 6) * 2,	\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+#define regulator_desc_buck8	{				\
+	.name		= "BUCK8",				\
+	.id		= S2MPA01_BUCK8,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPA01_BUCK_MIN2,			\
+	.uV_step	= S2MPA01_BUCK_STEP2,			\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B8CTRL2,			\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B8CTRL1,			\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+#define regulator_desc_buck9	{				\
+	.name		= "BUCK9",				\
+	.id		= S2MPA01_BUCK9,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPA01_BUCK_MIN4,			\
+	.uV_step	= S2MPA01_BUCK_STEP2,			\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B9CTRL2,			\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B9CTRL1,			\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+#define regulator_desc_buck10	{				\
+	.name		= "BUCK10",				\
+	.id		= S2MPA01_BUCK10,			\
+	.ops		= &s2mpa01_buck_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= S2MPA01_BUCK_MIN3,			\
+	.uV_step	= S2MPA01_BUCK_STEP2,			\
+	.n_voltages	= S2MPA01_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPA01_RAMP_DELAY,			\
+	.vsel_reg	= S2MPA01_REG_B10CTRL2,			\
+	.vsel_mask	= S2MPA01_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPA01_REG_B10CTRL1,			\
+	.enable_mask	= S2MPA01_ENABLE_MASK			\
+}
+
+static struct regulator_desc regulators[] = {
+	regulator_desc_ldo2(1),
+	regulator_desc_ldo1(2),
+	regulator_desc_ldo1(3),
+	regulator_desc_ldo1(4),
+	regulator_desc_ldo1(5),
+	regulator_desc_ldo2(6),
+	regulator_desc_ldo1(7),
+	regulator_desc_ldo1(8),
+	regulator_desc_ldo1(9),
+	regulator_desc_ldo1(10),
+	regulator_desc_ldo2(11),
+	regulator_desc_ldo1(12),
+	regulator_desc_ldo1(13),
+	regulator_desc_ldo1(14),
+	regulator_desc_ldo1(15),
+	regulator_desc_ldo1(16),
+	regulator_desc_ldo1(17),
+	regulator_desc_ldo1(18),
+	regulator_desc_ldo1(19),
+	regulator_desc_ldo1(20),
+	regulator_desc_ldo1(21),
+	regulator_desc_ldo2(22),
+	regulator_desc_ldo2(23),
+	regulator_desc_ldo1(24),
+	regulator_desc_ldo1(25),
+	regulator_desc_ldo1(26),
+	regulator_desc_buck1_4(1),
+	regulator_desc_buck1_4(2),
+	regulator_desc_buck1_4(3),
+	regulator_desc_buck1_4(4),
+	regulator_desc_buck5,
+	regulator_desc_buck6_7(6),
+	regulator_desc_buck6_7(7),
+	regulator_desc_buck8,
+	regulator_desc_buck9,
+	regulator_desc_buck10,
+};
+
+static int s2mpa01_pmic_probe(struct platform_device *pdev)
+{
+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
+	struct device_node *reg_np = NULL;
+	struct regulator_config config = { };
+	struct s2mpa01_info *s2mpa01;
+	int i;
+
+	s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
+	if (!s2mpa01)
+		return -ENOMEM;
+
+	for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
+		rdata[i].name = regulators[i].name;
+
+	if (iodev->dev->of_node) {
+		reg_np = of_get_child_by_name(iodev->dev->of_node,
+							"regulators");
+			if (!reg_np) {
+				dev_err(&pdev->dev,
+					"could not find regulators sub-node\n");
+				return -EINVAL;
+			}
+
+		of_regulator_match(&pdev->dev, reg_np, rdata,
+						S2MPA01_REGULATOR_MAX);
+		of_node_put(reg_np);
+	}
+
+	platform_set_drvdata(pdev, s2mpa01);
+
+	config.dev = &pdev->dev;
+	config.regmap = iodev->regmap_pmic;
+	config.driver_data = s2mpa01;
+
+	for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
+		struct regulator_dev *rdev;
+		if (pdata)
+			config.init_data = pdata->regulators[i].initdata;
+		else
+			config.init_data = rdata[i].init_data;
+
+		if (reg_np)
+			config.of_node = rdata[i].of_node;
+
+		rdev = devm_regulator_register(&pdev->dev,
+						&regulators[i], &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "regulator init failed for %d\n",
+				i);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id s2mpa01_pmic_id[] = {
+	{ "s2mpa01-pmic", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
+
+static struct platform_driver s2mpa01_pmic_driver = {
+	.driver = {
+		.name = "s2mpa01-pmic",
+		.owner = THIS_MODULE,
+	},
+	.probe = s2mpa01_pmic_probe,
+	.id_table = s2mpa01_pmic_id,
+};
+
+module_platform_driver(s2mpa01_pmic_driver);
+
+/* Module information */
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
+MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 41c9bde410c5..900bc9e1888b 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -18,7 +18,9 @@ enum sec_device_type {
 	S5M8751X,
 	S5M8763X,
 	S5M8767X,
+	S2MPA01,
 	S2MPS11X,
+	S2MPS14X,
 };
 
 /**
@@ -50,7 +52,7 @@ struct sec_pmic_dev {
 	struct regmap_irq_chip_data *irq_data;
 
 	int ono;
-	int type;
+	unsigned long type;
 	bool wakeup;
 	bool wtsr_smpl;
 };
@@ -92,7 +94,7 @@ struct sec_platform_data {
 	int				buck3_default_idx;
 	int				buck4_default_idx;
 
-	int                             buck_ramp_delay;
+	int				buck_ramp_delay;
 
 	int				buck2_ramp_delay;
 	int				buck34_ramp_delay;
@@ -100,10 +102,15 @@ struct sec_platform_data {
 	int				buck16_ramp_delay;
 	int				buck7810_ramp_delay;
 	int				buck9_ramp_delay;
+	int				buck24_ramp_delay;
+	int				buck3_ramp_delay;
+	int				buck7_ramp_delay;
+	int				buck8910_ramp_delay;
 
-	bool                            buck2_ramp_enable;
-	bool                            buck3_ramp_enable;
-	bool                            buck4_ramp_enable;
+	bool				buck1_ramp_enable;
+	bool				buck2_ramp_enable;
+	bool				buck3_ramp_enable;
+	bool				buck4_ramp_enable;
 	bool				buck6_ramp_enable;
 
 	int				buck2_init;
diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
index d43b4f9e7fb2..1224f447356b 100644
--- a/include/linux/mfd/samsung/irq.h
+++ b/include/linux/mfd/samsung/irq.h
@@ -13,6 +13,56 @@
 #ifndef __LINUX_MFD_SEC_IRQ_H
 #define __LINUX_MFD_SEC_IRQ_H
 
+enum s2mpa01_irq {
+	S2MPA01_IRQ_PWRONF,
+	S2MPA01_IRQ_PWRONR,
+	S2MPA01_IRQ_JIGONBF,
+	S2MPA01_IRQ_JIGONBR,
+	S2MPA01_IRQ_ACOKBF,
+	S2MPA01_IRQ_ACOKBR,
+	S2MPA01_IRQ_PWRON1S,
+	S2MPA01_IRQ_MRB,
+
+	S2MPA01_IRQ_RTC60S,
+	S2MPA01_IRQ_RTCA1,
+	S2MPA01_IRQ_RTCA0,
+	S2MPA01_IRQ_SMPL,
+	S2MPA01_IRQ_RTC1S,
+	S2MPA01_IRQ_WTSR,
+
+	S2MPA01_IRQ_INT120C,
+	S2MPA01_IRQ_INT140C,
+	S2MPA01_IRQ_LDO3_TSD,
+	S2MPA01_IRQ_B16_TSD,
+	S2MPA01_IRQ_B24_TSD,
+	S2MPA01_IRQ_B35_TSD,
+
+	S2MPA01_IRQ_NR,
+};
+
+#define S2MPA01_IRQ_PWRONF_MASK		(1 << 0)
+#define S2MPA01_IRQ_PWRONR_MASK		(1 << 1)
+#define S2MPA01_IRQ_JIGONBF_MASK	(1 << 2)
+#define S2MPA01_IRQ_JIGONBR_MASK	(1 << 3)
+#define S2MPA01_IRQ_ACOKBF_MASK		(1 << 4)
+#define S2MPA01_IRQ_ACOKBR_MASK		(1 << 5)
+#define S2MPA01_IRQ_PWRON1S_MASK	(1 << 6)
+#define S2MPA01_IRQ_MRB_MASK		(1 << 7)
+
+#define S2MPA01_IRQ_RTC60S_MASK		(1 << 0)
+#define S2MPA01_IRQ_RTCA1_MASK		(1 << 1)
+#define S2MPA01_IRQ_RTCA0_MASK		(1 << 2)
+#define S2MPA01_IRQ_SMPL_MASK		(1 << 3)
+#define S2MPA01_IRQ_RTC1S_MASK		(1 << 4)
+#define S2MPA01_IRQ_WTSR_MASK		(1 << 5)
+
+#define S2MPA01_IRQ_INT120C_MASK	(1 << 0)
+#define S2MPA01_IRQ_INT140C_MASK	(1 << 1)
+#define S2MPA01_IRQ_LDO3_TSD_MASK	(1 << 2)
+#define S2MPA01_IRQ_B16_TSD_MASK	(1 << 3)
+#define S2MPA01_IRQ_B24_TSD_MASK	(1 << 4)
+#define S2MPA01_IRQ_B35_TSD_MASK	(1 << 5)
+
 enum s2mps11_irq {
 	S2MPS11_IRQ_PWRONF,
 	S2MPS11_IRQ_PWRONR,
@@ -24,8 +74,8 @@ enum s2mps11_irq {
 	S2MPS11_IRQ_MRB,
 
 	S2MPS11_IRQ_RTC60S,
+	S2MPS11_IRQ_RTCA0,
 	S2MPS11_IRQ_RTCA1,
-	S2MPS11_IRQ_RTCA2,
 	S2MPS11_IRQ_SMPL,
 	S2MPS11_IRQ_RTC1S,
 	S2MPS11_IRQ_WTSR,
@@ -47,7 +97,7 @@ enum s2mps11_irq {
 
 #define S2MPS11_IRQ_RTC60S_MASK		(1 << 0)
 #define S2MPS11_IRQ_RTCA1_MASK		(1 << 1)
-#define S2MPS11_IRQ_RTCA2_MASK		(1 << 2)
+#define S2MPS11_IRQ_RTCA0_MASK		(1 << 2)
 #define S2MPS11_IRQ_SMPL_MASK		(1 << 3)
 #define S2MPS11_IRQ_RTC1S_MASK		(1 << 4)
 #define S2MPS11_IRQ_WTSR_MASK		(1 << 5)
@@ -55,6 +105,33 @@ enum s2mps11_irq {
 #define S2MPS11_IRQ_INT120C_MASK	(1 << 0)
 #define S2MPS11_IRQ_INT140C_MASK	(1 << 1)
 
+enum s2mps14_irq {
+	S2MPS14_IRQ_PWRONF,
+	S2MPS14_IRQ_PWRONR,
+	S2MPS14_IRQ_JIGONBF,
+	S2MPS14_IRQ_JIGONBR,
+	S2MPS14_IRQ_ACOKBF,
+	S2MPS14_IRQ_ACOKBR,
+	S2MPS14_IRQ_PWRON1S,
+	S2MPS14_IRQ_MRB,
+
+	S2MPS14_IRQ_RTC60S,
+	S2MPS14_IRQ_RTCA1,
+	S2MPS14_IRQ_RTCA0,
+	S2MPS14_IRQ_SMPL,
+	S2MPS14_IRQ_RTC1S,
+	S2MPS14_IRQ_WTSR,
+
+	S2MPS14_IRQ_INT120C,
+	S2MPS14_IRQ_INT140C,
+	S2MPS14_IRQ_TSD,
+
+	S2MPS14_IRQ_NR,
+};
+
+/* Masks for interrupts are the same as in s2mps11 */
+#define S2MPS14_IRQ_TSD_MASK		(1 << 2)
+
 enum s5m8767_irq {
 	S5M8767_IRQ_PWRR,
 	S5M8767_IRQ_PWRF,
diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h
index 94b7cd6d8891..3e02b768d537 100644
--- a/include/linux/mfd/samsung/rtc.h
+++ b/include/linux/mfd/samsung/rtc.h
@@ -1,12 +1,17 @@
-/*  rtc.h
+/* rtc.h
  *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  *
  */
 
@@ -43,6 +48,39 @@ enum sec_rtc_reg {
 	SEC_RTC_STATUS,
 	SEC_WTSR_SMPL_CNTL,
 	SEC_RTC_UDR_CON,
+
+	SEC_RTC_REG_MAX,
+};
+
+enum s2mps_rtc_reg {
+	S2MPS_RTC_CTRL,
+	S2MPS_WTSR_SMPL_CNTL,
+	S2MPS_RTC_UDR_CON,
+	S2MPS_RSVD,
+	S2MPS_RTC_SEC,
+	S2MPS_RTC_MIN,
+	S2MPS_RTC_HOUR,
+	S2MPS_RTC_WEEKDAY,
+	S2MPS_RTC_DATE,
+	S2MPS_RTC_MONTH,
+	S2MPS_RTC_YEAR,
+	S2MPS_ALARM0_SEC,
+	S2MPS_ALARM0_MIN,
+	S2MPS_ALARM0_HOUR,
+	S2MPS_ALARM0_WEEKDAY,
+	S2MPS_ALARM0_DATE,
+	S2MPS_ALARM0_MONTH,
+	S2MPS_ALARM0_YEAR,
+	S2MPS_ALARM1_SEC,
+	S2MPS_ALARM1_MIN,
+	S2MPS_ALARM1_HOUR,
+	S2MPS_ALARM1_WEEKDAY,
+	S2MPS_ALARM1_DATE,
+	S2MPS_ALARM1_MONTH,
+	S2MPS_ALARM1_YEAR,
+	S2MPS_OFFSRC,
+
+	S2MPS_RTC_REG_MAX,
 };
 
 #define RTC_I2C_ADDR		(0x0C >> 1)
@@ -54,6 +92,9 @@ enum sec_rtc_reg {
 #define ALARM1_STATUS		(1 << 2)
 #define UPDATE_AD		(1 << 0)
 
+#define S2MPS_ALARM0_STATUS	(1 << 2)
+#define S2MPS_ALARM1_STATUS	(1 << 1)
+
 /* RTC Control Register */
 #define BCD_EN_SHIFT		0
 #define BCD_EN_MASK		(1 << BCD_EN_SHIFT)
@@ -62,6 +103,10 @@ enum sec_rtc_reg {
 /* RTC Update Register1 */
 #define RTC_UDR_SHIFT		0
 #define RTC_UDR_MASK		(1 << RTC_UDR_SHIFT)
+#define S2MPS_RTC_WUDR_SHIFT	4
+#define S2MPS_RTC_WUDR_MASK	(1 << S2MPS_RTC_WUDR_SHIFT)
+#define S2MPS_RTC_RUDR_SHIFT	0
+#define S2MPS_RTC_RUDR_MASK	(1 << S2MPS_RTC_RUDR_SHIFT)
 #define RTC_TCON_SHIFT		1
 #define RTC_TCON_MASK		(1 << RTC_TCON_SHIFT)
 #define RTC_TIME_EN_SHIFT	3
diff --git a/include/linux/mfd/samsung/s2mpa01.h b/include/linux/mfd/samsung/s2mpa01.h
new file mode 100644
index 000000000000..fbc63bc0d6a2
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mpa01.h
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd
+ *		http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPA01_H
+#define __LINUX_MFD_S2MPA01_H
+
+/* S2MPA01 registers */
+enum s2mpa01_reg {
+	S2MPA01_REG_ID,
+	S2MPA01_REG_INT1,
+	S2MPA01_REG_INT2,
+	S2MPA01_REG_INT3,
+	S2MPA01_REG_INT1M,
+	S2MPA01_REG_INT2M,
+	S2MPA01_REG_INT3M,
+	S2MPA01_REG_ST1,
+	S2MPA01_REG_ST2,
+	S2MPA01_REG_PWRONSRC,
+	S2MPA01_REG_OFFSRC,
+	S2MPA01_REG_RTC_BUF,
+	S2MPA01_REG_CTRL1,
+	S2MPA01_REG_ETC_TEST,
+	S2MPA01_REG_RSVD1,
+	S2MPA01_REG_BU_CHG,
+	S2MPA01_REG_RAMP1,
+	S2MPA01_REG_RAMP2,
+	S2MPA01_REG_LDO_DSCH1,
+	S2MPA01_REG_LDO_DSCH2,
+	S2MPA01_REG_LDO_DSCH3,
+	S2MPA01_REG_LDO_DSCH4,
+	S2MPA01_REG_OTP_ADRL,
+	S2MPA01_REG_OTP_ADRH,
+	S2MPA01_REG_OTP_DATA,
+	S2MPA01_REG_MON1SEL,
+	S2MPA01_REG_MON2SEL,
+	S2MPA01_REG_LEE,
+	S2MPA01_REG_RSVD2,
+	S2MPA01_REG_RSVD3,
+	S2MPA01_REG_RSVD4,
+	S2MPA01_REG_RSVD5,
+	S2MPA01_REG_RSVD6,
+	S2MPA01_REG_TOP_RSVD,
+	S2MPA01_REG_DVS_SEL,
+	S2MPA01_REG_DVS_PTR,
+	S2MPA01_REG_DVS_DATA,
+	S2MPA01_REG_RSVD_NO,
+	S2MPA01_REG_UVLO,
+	S2MPA01_REG_LEE_NO,
+	S2MPA01_REG_B1CTRL1,
+	S2MPA01_REG_B1CTRL2,
+	S2MPA01_REG_B2CTRL1,
+	S2MPA01_REG_B2CTRL2,
+	S2MPA01_REG_B3CTRL1,
+	S2MPA01_REG_B3CTRL2,
+	S2MPA01_REG_B4CTRL1,
+	S2MPA01_REG_B4CTRL2,
+	S2MPA01_REG_B5CTRL1,
+	S2MPA01_REG_B5CTRL2,
+	S2MPA01_REG_B5CTRL3,
+	S2MPA01_REG_B5CTRL4,
+	S2MPA01_REG_B5CTRL5,
+	S2MPA01_REG_B5CTRL6,
+	S2MPA01_REG_B6CTRL1,
+	S2MPA01_REG_B6CTRL2,
+	S2MPA01_REG_B7CTRL1,
+	S2MPA01_REG_B7CTRL2,
+	S2MPA01_REG_B8CTRL1,
+	S2MPA01_REG_B8CTRL2,
+	S2MPA01_REG_B9CTRL1,
+	S2MPA01_REG_B9CTRL2,
+	S2MPA01_REG_B10CTRL1,
+	S2MPA01_REG_B10CTRL2,
+	S2MPA01_REG_L1CTRL,
+	S2MPA01_REG_L2CTRL,
+	S2MPA01_REG_L3CTRL,
+	S2MPA01_REG_L4CTRL,
+	S2MPA01_REG_L5CTRL,
+	S2MPA01_REG_L6CTRL,
+	S2MPA01_REG_L7CTRL,
+	S2MPA01_REG_L8CTRL,
+	S2MPA01_REG_L9CTRL,
+	S2MPA01_REG_L10CTRL,
+	S2MPA01_REG_L11CTRL,
+	S2MPA01_REG_L12CTRL,
+	S2MPA01_REG_L13CTRL,
+	S2MPA01_REG_L14CTRL,
+	S2MPA01_REG_L15CTRL,
+	S2MPA01_REG_L16CTRL,
+	S2MPA01_REG_L17CTRL,
+	S2MPA01_REG_L18CTRL,
+	S2MPA01_REG_L19CTRL,
+	S2MPA01_REG_L20CTRL,
+	S2MPA01_REG_L21CTRL,
+	S2MPA01_REG_L22CTRL,
+	S2MPA01_REG_L23CTRL,
+	S2MPA01_REG_L24CTRL,
+	S2MPA01_REG_L25CTRL,
+	S2MPA01_REG_L26CTRL,
+
+	S2MPA01_REG_LDO_OVCB1,
+	S2MPA01_REG_LDO_OVCB2,
+	S2MPA01_REG_LDO_OVCB3,
+	S2MPA01_REG_LDO_OVCB4,
+
+};
+
+/* S2MPA01 regulator ids */
+enum s2mpa01_regulators {
+	S2MPA01_LDO1,
+	S2MPA01_LDO2,
+	S2MPA01_LDO3,
+	S2MPA01_LDO4,
+	S2MPA01_LDO5,
+	S2MPA01_LDO6,
+	S2MPA01_LDO7,
+	S2MPA01_LDO8,
+	S2MPA01_LDO9,
+	S2MPA01_LDO10,
+	S2MPA01_LDO11,
+	S2MPA01_LDO12,
+	S2MPA01_LDO13,
+	S2MPA01_LDO14,
+	S2MPA01_LDO15,
+	S2MPA01_LDO16,
+	S2MPA01_LDO17,
+	S2MPA01_LDO18,
+	S2MPA01_LDO19,
+	S2MPA01_LDO20,
+	S2MPA01_LDO21,
+	S2MPA01_LDO22,
+	S2MPA01_LDO23,
+	S2MPA01_LDO24,
+	S2MPA01_LDO25,
+	S2MPA01_LDO26,
+
+	S2MPA01_BUCK1,
+	S2MPA01_BUCK2,
+	S2MPA01_BUCK3,
+	S2MPA01_BUCK4,
+	S2MPA01_BUCK5,
+	S2MPA01_BUCK6,
+	S2MPA01_BUCK7,
+	S2MPA01_BUCK8,
+	S2MPA01_BUCK9,
+	S2MPA01_BUCK10,
+
+	S2MPA01_REGULATOR_MAX,
+};
+
+#define S2MPA01_BUCK_MIN1	600000
+#define S2MPA01_BUCK_MIN2	800000
+#define S2MPA01_BUCK_MIN3	1000000
+#define S2MPA01_BUCK_MIN4	1500000
+#define S2MPA01_LDO_MIN		800000
+
+#define S2MPA01_BUCK_STEP1	6250
+#define S2MPA01_BUCK_STEP2	12500
+
+#define S2MPA01_LDO_STEP1	50000
+#define S2MPA01_LDO_STEP2	25000
+
+#define S2MPA01_LDO_VSEL_MASK	0x3F
+#define S2MPA01_BUCK_VSEL_MASK	0xFF
+#define S2MPA01_ENABLE_MASK	(0x03 << S2MPA01_ENABLE_SHIFT)
+#define S2MPA01_ENABLE_SHIFT	0x06
+#define S2MPA01_LDO_N_VOLTAGES	(S2MPA01_LDO_VSEL_MASK + 1)
+#define S2MPA01_BUCK_N_VOLTAGES (S2MPA01_BUCK_VSEL_MASK + 1)
+
+#define S2MPA01_RAMP_DELAY	12500	/* uV/us */
+
+#define S2MPA01_BUCK16_RAMP_SHIFT	4
+#define S2MPA01_BUCK24_RAMP_SHIFT	6
+#define S2MPA01_BUCK3_RAMP_SHIFT	4
+#define S2MPA01_BUCK5_RAMP_SHIFT	6
+#define S2MPA01_BUCK7_RAMP_SHIFT	2
+#define S2MPA01_BUCK8910_RAMP_SHIFT	0
+
+#define S2MPA01_BUCK1_RAMP_EN_SHIFT	3
+#define S2MPA01_BUCK2_RAMP_EN_SHIFT	2
+#define S2MPA01_BUCK3_RAMP_EN_SHIFT	1
+#define S2MPA01_BUCK4_RAMP_EN_SHIFT	0
+#define S2MPA01_PMIC_EN_SHIFT	6
+
+#endif /*__LINUX_MFD_S2MPA01_H */
diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h
new file mode 100644
index 000000000000..ec1e0857ddde
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mps14.h
@@ -0,0 +1,152 @@
+/*
+ * s2mps14.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPS14_H
+#define __LINUX_MFD_S2MPS14_H
+
+/* S2MPS14 registers */
+enum s2mps14_reg {
+	S2MPS14_REG_ID,
+	S2MPS14_REG_INT1,
+	S2MPS14_REG_INT2,
+	S2MPS14_REG_INT3,
+	S2MPS14_REG_INT1M,
+	S2MPS14_REG_INT2M,
+	S2MPS14_REG_INT3M,
+	S2MPS14_REG_ST1,
+	S2MPS14_REG_ST2,
+	S2MPS14_REG_PWRONSRC,
+	S2MPS14_REG_OFFSRC,
+	S2MPS14_REG_BU_CHG,
+	S2MPS14_REG_RTCCTRL,
+	S2MPS14_REG_CTRL1,
+	S2MPS14_REG_CTRL2,
+	S2MPS14_REG_RSVD1,
+	S2MPS14_REG_RSVD2,
+	S2MPS14_REG_RSVD3,
+	S2MPS14_REG_RSVD4,
+	S2MPS14_REG_RSVD5,
+	S2MPS14_REG_RSVD6,
+	S2MPS14_REG_CTRL3,
+	S2MPS14_REG_RSVD7,
+	S2MPS14_REG_RSVD8,
+	S2MPS14_REG_WRSTBI,
+	S2MPS14_REG_B1CTRL1,
+	S2MPS14_REG_B1CTRL2,
+	S2MPS14_REG_B2CTRL1,
+	S2MPS14_REG_B2CTRL2,
+	S2MPS14_REG_B3CTRL1,
+	S2MPS14_REG_B3CTRL2,
+	S2MPS14_REG_B4CTRL1,
+	S2MPS14_REG_B4CTRL2,
+	S2MPS14_REG_B5CTRL1,
+	S2MPS14_REG_B5CTRL2,
+	S2MPS14_REG_L1CTRL,
+	S2MPS14_REG_L2CTRL,
+	S2MPS14_REG_L3CTRL,
+	S2MPS14_REG_L4CTRL,
+	S2MPS14_REG_L5CTRL,
+	S2MPS14_REG_L6CTRL,
+	S2MPS14_REG_L7CTRL,
+	S2MPS14_REG_L8CTRL,
+	S2MPS14_REG_L9CTRL,
+	S2MPS14_REG_L10CTRL,
+	S2MPS14_REG_L11CTRL,
+	S2MPS14_REG_L12CTRL,
+	S2MPS14_REG_L13CTRL,
+	S2MPS14_REG_L14CTRL,
+	S2MPS14_REG_L15CTRL,
+	S2MPS14_REG_L16CTRL,
+	S2MPS14_REG_L17CTRL,
+	S2MPS14_REG_L18CTRL,
+	S2MPS14_REG_L19CTRL,
+	S2MPS14_REG_L20CTRL,
+	S2MPS14_REG_L21CTRL,
+	S2MPS14_REG_L22CTRL,
+	S2MPS14_REG_L23CTRL,
+	S2MPS14_REG_L24CTRL,
+	S2MPS14_REG_L25CTRL,
+	S2MPS14_REG_LDODSCH1,
+	S2MPS14_REG_LDODSCH2,
+	S2MPS14_REG_LDODSCH3,
+};
+
+/* S2MPS14 regulator ids */
+enum s2mps14_regulators {
+	S2MPS14_LDO1,
+	S2MPS14_LDO2,
+	S2MPS14_LDO3,
+	S2MPS14_LDO4,
+	S2MPS14_LDO5,
+	S2MPS14_LDO6,
+	S2MPS14_LDO7,
+	S2MPS14_LDO8,
+	S2MPS14_LDO9,
+	S2MPS14_LDO10,
+	S2MPS14_LDO11,
+	S2MPS14_LDO12,
+	S2MPS14_LDO13,
+	S2MPS14_LDO14,
+	S2MPS14_LDO15,
+	S2MPS14_LDO16,
+	S2MPS14_LDO17,
+	S2MPS14_LDO18,
+	S2MPS14_LDO19,
+	S2MPS14_LDO20,
+	S2MPS14_LDO21,
+	S2MPS14_LDO22,
+	S2MPS14_LDO23,
+	S2MPS14_LDO24,
+	S2MPS14_LDO25,
+	S2MPS14_BUCK1,
+	S2MPS14_BUCK2,
+	S2MPS14_BUCK3,
+	S2MPS14_BUCK4,
+	S2MPS14_BUCK5,
+
+	S2MPS14_REGULATOR_MAX,
+};
+
+/* Regulator constraints for BUCKx */
+#define S2MPS14_BUCK1235_MIN_600MV	600000
+#define S2MPS14_BUCK4_MIN_1400MV	1400000
+#define S2MPS14_BUCK1235_STEP_6_25MV	6250
+#define S2MPS14_BUCK4_STEP_12_5MV	12500
+#define S2MPS14_BUCK1235_START_SEL	0x20
+#define S2MPS14_BUCK4_START_SEL		0x40
+/*
+ * Default ramp delay in uv/us. Datasheet says that ramp delay can be
+ * controlled however it does not specify which register is used for that.
+ * Let's assume that default value will be set.
+ */
+#define S2MPS14_BUCK_RAMP_DELAY		12500
+
+/* Regulator constraints for different types of LDOx */
+#define S2MPS14_LDO_MIN_800MV		800000
+#define S2MPS14_LDO_MIN_1800MV		1800000
+#define S2MPS14_LDO_STEP_12_5MV		12500
+#define S2MPS14_LDO_STEP_25MV		25000
+
+#define S2MPS14_LDO_VSEL_MASK		0x3F
+#define S2MPS14_BUCK_VSEL_MASK		0xFF
+#define S2MPS14_ENABLE_MASK		(0x03 << S2MPS14_ENABLE_SHIFT)
+#define S2MPS14_ENABLE_SHIFT		6
+#define S2MPS14_LDO_N_VOLTAGES		(S2MPS14_LDO_VSEL_MASK + 1)
+#define S2MPS14_BUCK_N_VOLTAGES		(S2MPS14_BUCK_VSEL_MASK + 1)
+
+#endif /*  __LINUX_MFD_S2MPS14_H */