diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 9f25fd8ca4a9..77e806798822 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -136,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio) } static struct i2c_board_info dm355evm_i2c_info[] = { - { I2C_BOARD_INFO("dm355evm_msp", 0x25), + { I2C_BOARD_INFO("dm355evm_msp", 0x25), .platform_data = dm355evm_mmcsd_gpios, - /* plus irq */ }, + }, + /* { plus irq }, */ { I2C_BOARD_INFO("tlv320aic33", 0x1b), }, - /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ }; static void __init evm_init_i2c(void) @@ -179,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = { .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), }; +static struct tvp514x_platform_data tvp5146_pdata = { + .clk_polarity = 0, + .hs_polarity = 1, + .vs_polarity = 1 +}; + +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) +/* Inputs available at the TVP5146 */ +static struct v4l2_input tvp5146_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, +}; + +/* + * this is the route info for connecting each input to decoder + * ouput that goes to vpfe. There is a one to one correspondence + * with tvp5146_inputs + */ +static struct vpfe_route tvp5146_routes[] = { + { + .input = INPUT_CVBS_VI2B, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + }, + { + .input = INPUT_SVIDEO_VI2C_VI1C, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + }, +}; + +static struct vpfe_subdev_info vpfe_sub_devs[] = { + { + .name = "tvp5146", + .grp_id = 0, + .num_inputs = ARRAY_SIZE(tvp5146_inputs), + .inputs = tvp5146_inputs, + .routes = tvp5146_routes, + .can_route = 1, + .ccdc_if_params = { + .if_type = VPFE_BT656, + .hdpol = VPFE_PINPOL_POSITIVE, + .vdpol = VPFE_PINPOL_POSITIVE, + }, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5d), + .platform_data = &tvp5146_pdata, + }, + } +}; + +static struct vpfe_config vpfe_cfg = { + .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .sub_devs = vpfe_sub_devs, + .card_name = "DM355 EVM", + .ccdc = "DM355 CCDC", +}; + static struct platform_device *davinci_evm_devices[] __initdata = { &dm355evm_dm9000, &davinci_nand_device, @@ -190,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm355_evm_map_io(void) { + /* setup input configuration for VPFE input devices */ + dm355_set_vpfe_config(&vpfe_cfg); dm355_init(); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 4f42169c029c..059670018aff 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -488,6 +488,14 @@ MUX_CFG(DM355, VOUT_FIELD_G70, 1, 18, 3, 0, false) MUX_CFG(DM355, VOUT_HVSYNC, 1, 16, 1, 0, false) MUX_CFG(DM355, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false) MUX_CFG(DM355, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false) + +MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false) +MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false) +MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false) +MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false) +MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false) +MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false) +MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false) #endif }; @@ -659,6 +667,67 @@ static struct platform_device dm355_asp1_device = { .resource = dm355_asp1_resources, }; +static struct resource dm355_vpss_resources[] = { + { + /* VPSS BL Base address */ + .name = "vpss", + .start = 0x01c70800, + .end = 0x01c70800 + 0xff, + .flags = IORESOURCE_MEM, + }, + { + /* VPSS CLK Base address */ + .name = "vpss", + .start = 0x01c70000, + .end = 0x01c70000 + 0xf, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm355_vpss_device = { + .name = "vpss", + .id = -1, + .dev.platform_data = "dm355_vpss", + .num_resources = ARRAY_SIZE(dm355_vpss_resources), + .resource = dm355_vpss_resources, +}; + +static struct resource vpfe_resources[] = { + { + .start = IRQ_VDINT0, + .end = IRQ_VDINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_VDINT1, + .end = IRQ_VDINT1, + .flags = IORESOURCE_IRQ, + }, + /* CCDC Base address */ + { + .flags = IORESOURCE_MEM, + .start = 0x01c70600, + .end = 0x01c70600 + 0x1ff, + }, +}; + +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static struct platform_device vpfe_capture_dev = { + .name = CAPTURE_DRV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(vpfe_resources), + .resource = vpfe_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void dm355_set_vpfe_config(struct vpfe_config *cfg) +{ + vpfe_capture_dev.dev.platform_data = cfg; +} + /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -792,6 +861,20 @@ static int __init dm355_init_devices(void) davinci_cfg_reg(DM355_INT_EDMA_CC); platform_device_register(&dm355_edma_device); + platform_device_register(&dm355_vpss_device); + /* + * setup Mux configuration for vpfe input and register + * vpfe capture platform device + */ + davinci_cfg_reg(DM355_VIN_PCLK); + davinci_cfg_reg(DM355_VIN_CAM_WEN); + davinci_cfg_reg(DM355_VIN_CAM_VD); + davinci_cfg_reg(DM355_VIN_CAM_HD); + davinci_cfg_reg(DM355_VIN_YIN_EN); + davinci_cfg_reg(DM355_VIN_CINL_EN); + davinci_cfg_reg(DM355_VIN_CINH_EN); + platform_device_register(&vpfe_capture_dev); + return 0; } postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h index 03faaef95a9a..85536d8e8336 100644 --- a/arch/arm/mach-davinci/include/mach/dm355.h +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -13,6 +13,7 @@ #include #include +#include #define ASP1_TX_EVT_EN 1 #define ASP1_RX_EVT_EN 2 @@ -23,5 +24,6 @@ void __init dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, struct spi_board_info *info, unsigned len); void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); +void dm355_set_vpfe_config(struct vpfe_config *cfg); #endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 773283281be8..bb84893a4e83 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -161,6 +161,15 @@ enum davinci_dm355_index { DM355_VOUT_HVSYNC, DM355_VOUT_COUTL_EN, DM355_VOUT_COUTH_EN, + + /* Video In Pin Mux */ + DM355_VIN_PCLK, + DM355_VIN_CAM_WEN, + DM355_VIN_CAM_VD, + DM355_VIN_CAM_HD, + DM355_VIN_YIN_EN, + DM355_VIN_CINL_EN, + DM355_VIN_CINH_EN, }; enum davinci_dm365_index {