Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces

Add documentation for the new attributes for systems of type MQM87xx,
MSN34xx, MSN37xx. It includes the attributes related to ComEx resets,
system platform reset, JTAG interface enabling, additional CPLD device.
All the above system are equipped with ComEX board, have JTAG selector
and extra CPLD.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Change kernel version from 5.0 to 4.21 until we know for sure]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This commit is contained in:
Vadim Pasternak 2018-11-15 17:26:59 +00:00 committed by Darren Hart (VMware)
parent e2883859dd
commit 52675da1d0
1 changed files with 40 additions and 1 deletions

View File

@ -12,7 +12,6 @@ Description: This file shows ASIC health status. The possible values are:
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
cpld1_version
cpld2_version
Date: June 2018
KernelVersion: 4.19
Contact: Vadim Pasternak <vadimpmellanox.com>
@ -21,6 +20,28 @@ Description: These files show with which CPLD versions have been burned
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
cpld3_version
Date: November 2018
KernelVersion: 4.21
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files show with which CPLD versions have been burned
on LED board.
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
jtag_enable
Date: November 2018
KernelVersion: 4.21
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files enable and disable the access to the JTAG domain.
By default access to the JTAG domain is disabled.
The file is read/write.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
Date: June 2018
KernelVersion: 4.19
@ -76,3 +97,21 @@ Description: These files show the system reset cause, as following: power
reset cause.
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
reset_comex_pwr_fail
reset_from_comex
reset_system
reset_voltmon_upgrade_fail
Date: November 2018
KernelVersion: 4.21
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files show the system reset cause, as following: ComEx
power fail, reset from ComEx, system platform reset, reset
due to voltage monitor devices upgrade failure,
Value 1 in file means this is reset cause, 0 - otherwise.
Only one bit could be 1 at the same time, representing only
the last reset cause.
The files are read only.