drm/vc4: Report HVS underrun errors
Add a debugfs entry and helper for reporting HVS underrun errors as well as helpers for masking and unmasking the underrun interrupts. Add an IRQ handler and initial IRQ configuration. Rework related register definitions to take the channel number. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-2-paul.kocialkowski@bootlin.com
This commit is contained in:
Boris Brezillon
Maxime Ripard
parent
dbfbe717cc
commit
531a1b622d
|
|
@ -834,6 +834,14 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
|
|||
drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
|
||||
vc4_crtc->event = NULL;
|
||||
drm_crtc_vblank_put(crtc);
|
||||
|
||||
/* Wait for the page flip to unmask the underrun to ensure that
|
||||
* the display list was updated by the hardware. Before that
|
||||
* happens, the HVS will be using the previous display list with
|
||||
* the CRTC and encoder already reconfigured, leading to
|
||||
* underruns. This can be seen when reconfiguring the CRTC.
|
||||
*/
|
||||
vc4_hvs_unmask_underrun(dev, vc4_crtc->channel);
|
||||
}
|
||||
spin_unlock_irqrestore(&dev->event_lock, flags);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -23,6 +23,7 @@ static const struct drm_info_list vc4_debugfs_list[] = {
|
|||
{"vec_regs", vc4_vec_debugfs_regs, 0},
|
||||
{"txp_regs", vc4_txp_debugfs_regs, 0},
|
||||
{"hvs_regs", vc4_hvs_debugfs_regs, 0},
|
||||
{"hvs_underrun", vc4_hvs_debugfs_underrun, 0},
|
||||
{"crtc0_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)0},
|
||||
{"crtc1_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)1},
|
||||
{"crtc2_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)2},
|
||||
|
|
|
|||
|
|
@ -184,6 +184,13 @@ struct vc4_dev {
|
|||
/* Bitmask of the current bin_alloc used for overflow memory. */
|
||||
uint32_t bin_alloc_overflow;
|
||||
|
||||
/* Incremented when an underrun error happened after an atomic commit.
|
||||
* This is particularly useful to detect when a specific modeset is too
|
||||
* demanding in term of memory or HVS bandwidth which is hard to guess
|
||||
* at atomic check time.
|
||||
*/
|
||||
atomic_t underrun;
|
||||
|
||||
struct work_struct overflow_mem_work;
|
||||
|
||||
int power_refcount;
|
||||
|
|
@ -767,6 +774,9 @@ void vc4_irq_reset(struct drm_device *dev);
|
|||
extern struct platform_driver vc4_hvs_driver;
|
||||
void vc4_hvs_dump_state(struct drm_device *dev);
|
||||
int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused);
|
||||
int vc4_hvs_debugfs_underrun(struct seq_file *m, void *unused);
|
||||
void vc4_hvs_unmask_underrun(struct drm_device *dev, int channel);
|
||||
void vc4_hvs_mask_underrun(struct drm_device *dev, int channel);
|
||||
|
||||
/* vc4_kms.c */
|
||||
int vc4_kms_load(struct drm_device *dev);
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@
|
|||
* each CRTC.
|
||||
*/
|
||||
|
||||
#include <drm/drm_atomic_helper.h>
|
||||
#include <linux/component.h>
|
||||
#include "vc4_drv.h"
|
||||
#include "vc4_regs.h"
|
||||
|
|
@ -102,6 +103,18 @@ int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused)
|
|||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int vc4_hvs_debugfs_underrun(struct seq_file *m, void *data)
|
||||
{
|
||||
struct drm_info_node *node = m->private;
|
||||
struct drm_device *dev = node->minor->dev;
|
||||
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
||||
struct drm_printer p = drm_seq_file_printer(m);
|
||||
|
||||
drm_printf(&p, "%d\n", atomic_read(&vc4->underrun));
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* The filter kernel is composed of dwords each containing 3 9-bit
|
||||
|
|
@ -166,6 +179,67 @@ static int vc4_hvs_upload_linear_kernel(struct vc4_hvs *hvs,
|
|||
return 0;
|
||||
}
|
||||
|
||||
void vc4_hvs_mask_underrun(struct drm_device *dev, int channel)
|
||||
{
|
||||
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
||||
u32 dispctrl = HVS_READ(SCALER_DISPCTRL);
|
||||
|
||||
dispctrl &= ~SCALER_DISPCTRL_DSPEISLUR(channel);
|
||||
|
||||
HVS_WRITE(SCALER_DISPCTRL, dispctrl);
|
||||
}
|
||||
|
||||
void vc4_hvs_unmask_underrun(struct drm_device *dev, int channel)
|
||||
{
|
||||
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
||||
u32 dispctrl = HVS_READ(SCALER_DISPCTRL);
|
||||
|
||||
dispctrl |= SCALER_DISPCTRL_DSPEISLUR(channel);
|
||||
|
||||
HVS_WRITE(SCALER_DISPSTAT,
|
||||
SCALER_DISPSTAT_EUFLOW(channel));
|
||||
HVS_WRITE(SCALER_DISPCTRL, dispctrl);
|
||||
}
|
||||
|
||||
static void vc4_hvs_report_underrun(struct drm_device *dev)
|
||||
{
|
||||
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
||||
|
||||
atomic_inc(&vc4->underrun);
|
||||
DRM_DEV_ERROR(dev->dev, "HVS underrun\n");
|
||||
}
|
||||
|
||||
static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
|
||||
{
|
||||
struct drm_device *dev = data;
|
||||
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
||||
irqreturn_t irqret = IRQ_NONE;
|
||||
int channel;
|
||||
u32 control;
|
||||
u32 status;
|
||||
|
||||
status = HVS_READ(SCALER_DISPSTAT);
|
||||
control = HVS_READ(SCALER_DISPCTRL);
|
||||
|
||||
for (channel = 0; channel < SCALER_CHANNELS_COUNT; channel++) {
|
||||
/* Interrupt masking is not always honored, so check it here. */
|
||||
if (status & SCALER_DISPSTAT_EUFLOW(channel) &&
|
||||
control & SCALER_DISPCTRL_DSPEISLUR(channel)) {
|
||||
vc4_hvs_mask_underrun(dev, channel);
|
||||
vc4_hvs_report_underrun(dev);
|
||||
|
||||
irqret = IRQ_HANDLED;
|
||||
}
|
||||
}
|
||||
|
||||
/* Clear every per-channel interrupt flag. */
|
||||
HVS_WRITE(SCALER_DISPSTAT, SCALER_DISPSTAT_IRQMASK(0) |
|
||||
SCALER_DISPSTAT_IRQMASK(1) |
|
||||
SCALER_DISPSTAT_IRQMASK(2));
|
||||
|
||||
return irqret;
|
||||
}
|
||||
|
||||
static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
|
|
@ -219,15 +293,36 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
|
|||
dispctrl = HVS_READ(SCALER_DISPCTRL);
|
||||
|
||||
dispctrl |= SCALER_DISPCTRL_ENABLE;
|
||||
dispctrl |= SCALER_DISPCTRL_DISPEIRQ(0) |
|
||||
SCALER_DISPCTRL_DISPEIRQ(1) |
|
||||
SCALER_DISPCTRL_DISPEIRQ(2);
|
||||
|
||||
/* Set DSP3 (PV1) to use HVS channel 2, which would otherwise
|
||||
* be unused.
|
||||
*/
|
||||
dispctrl &= ~SCALER_DISPCTRL_DSP3_MUX_MASK;
|
||||
dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
|
||||
SCALER_DISPCTRL_SLVWREIRQ |
|
||||
SCALER_DISPCTRL_SLVRDEIRQ |
|
||||
SCALER_DISPCTRL_DSPEIEOF(0) |
|
||||
SCALER_DISPCTRL_DSPEIEOF(1) |
|
||||
SCALER_DISPCTRL_DSPEIEOF(2) |
|
||||
SCALER_DISPCTRL_DSPEIEOLN(0) |
|
||||
SCALER_DISPCTRL_DSPEIEOLN(1) |
|
||||
SCALER_DISPCTRL_DSPEIEOLN(2) |
|
||||
SCALER_DISPCTRL_DSPEISLUR(0) |
|
||||
SCALER_DISPCTRL_DSPEISLUR(1) |
|
||||
SCALER_DISPCTRL_DSPEISLUR(2) |
|
||||
SCALER_DISPCTRL_SCLEIRQ);
|
||||
dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX);
|
||||
|
||||
HVS_WRITE(SCALER_DISPCTRL, dispctrl);
|
||||
|
||||
ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
|
||||
vc4_hvs_irq_handler, 0, "vc4 hvs", drm);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -138,6 +138,16 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
|
|||
{
|
||||
struct drm_device *dev = state->dev;
|
||||
struct vc4_dev *vc4 = to_vc4_dev(dev);
|
||||
struct vc4_crtc *vc4_crtc;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < dev->mode_config.num_crtc; i++) {
|
||||
if (!state->crtcs[i].ptr || !state->crtcs[i].commit)
|
||||
continue;
|
||||
|
||||
vc4_crtc = to_vc4_crtc(state->crtcs[i].ptr);
|
||||
vc4_hvs_mask_underrun(dev, vc4_crtc->channel);
|
||||
}
|
||||
|
||||
drm_atomic_helper_wait_for_fences(dev, state, false);
|
||||
|
||||
|
|
|
|||
|
|
@ -212,11 +212,11 @@
|
|||
|
||||
#define PV_HACT_ACT 0x30
|
||||
|
||||
#define SCALER_CHANNELS_COUNT 3
|
||||
|
||||
#define SCALER_DISPCTRL 0x00000000
|
||||
/* Global register for clock gating the HVS */
|
||||
# define SCALER_DISPCTRL_ENABLE BIT(31)
|
||||
# define SCALER_DISPCTRL_DSP2EISLUR BIT(15)
|
||||
# define SCALER_DISPCTRL_DSP1EISLUR BIT(14)
|
||||
# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18)
|
||||
# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18
|
||||
|
||||
|
|
@ -224,45 +224,25 @@
|
|||
* SCALER_DISPSTAT_IRQDISP0. Note that short frame contributions are
|
||||
* always enabled.
|
||||
*/
|
||||
# define SCALER_DISPCTRL_DSP0EISLUR BIT(13)
|
||||
# define SCALER_DISPCTRL_DSP2EIEOLN BIT(12)
|
||||
# define SCALER_DISPCTRL_DSP2EIEOF BIT(11)
|
||||
# define SCALER_DISPCTRL_DSP1EIEOLN BIT(10)
|
||||
# define SCALER_DISPCTRL_DSP1EIEOF BIT(9)
|
||||
# define SCALER_DISPCTRL_DSPEISLUR(x) BIT(13 + (x))
|
||||
/* Enables Display 0 end-of-line-N contribution to
|
||||
* SCALER_DISPSTAT_IRQDISP0
|
||||
*/
|
||||
# define SCALER_DISPCTRL_DSP0EIEOLN BIT(8)
|
||||
# define SCALER_DISPCTRL_DSPEIEOLN(x) BIT(8 + ((x) * 2))
|
||||
/* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
|
||||
# define SCALER_DISPCTRL_DSP0EIEOF BIT(7)
|
||||
# define SCALER_DISPCTRL_DSPEIEOF(x) BIT(7 + ((x) * 2))
|
||||
|
||||
# define SCALER_DISPCTRL_SLVRDEIRQ BIT(6)
|
||||
# define SCALER_DISPCTRL_SLVWREIRQ BIT(5)
|
||||
# define SCALER_DISPCTRL_DMAEIRQ BIT(4)
|
||||
# define SCALER_DISPCTRL_DISP2EIRQ BIT(3)
|
||||
# define SCALER_DISPCTRL_DISP1EIRQ BIT(2)
|
||||
/* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
|
||||
* bits and short frames..
|
||||
*/
|
||||
# define SCALER_DISPCTRL_DISP0EIRQ BIT(1)
|
||||
# define SCALER_DISPCTRL_DISPEIRQ(x) BIT(1 + (x))
|
||||
/* Enables interrupt generation on scaler profiler interrupt. */
|
||||
# define SCALER_DISPCTRL_SCLEIRQ BIT(0)
|
||||
|
||||
#define SCALER_DISPSTAT 0x00000004
|
||||
# define SCALER_DISPSTAT_COBLOW2 BIT(29)
|
||||
# define SCALER_DISPSTAT_EOLN2 BIT(28)
|
||||
# define SCALER_DISPSTAT_ESFRAME2 BIT(27)
|
||||
# define SCALER_DISPSTAT_ESLINE2 BIT(26)
|
||||
# define SCALER_DISPSTAT_EUFLOW2 BIT(25)
|
||||
# define SCALER_DISPSTAT_EOF2 BIT(24)
|
||||
|
||||
# define SCALER_DISPSTAT_COBLOW1 BIT(21)
|
||||
# define SCALER_DISPSTAT_EOLN1 BIT(20)
|
||||
# define SCALER_DISPSTAT_ESFRAME1 BIT(19)
|
||||
# define SCALER_DISPSTAT_ESLINE1 BIT(18)
|
||||
# define SCALER_DISPSTAT_EUFLOW1 BIT(17)
|
||||
# define SCALER_DISPSTAT_EOF1 BIT(16)
|
||||
|
||||
# define SCALER_DISPSTAT_RESP_MASK VC4_MASK(15, 14)
|
||||
# define SCALER_DISPSTAT_RESP_SHIFT 14
|
||||
# define SCALER_DISPSTAT_RESP_OKAY 0
|
||||
|
|
@ -270,23 +250,26 @@
|
|||
# define SCALER_DISPSTAT_RESP_SLVERR 2
|
||||
# define SCALER_DISPSTAT_RESP_DECERR 3
|
||||
|
||||
# define SCALER_DISPSTAT_COBLOW0 BIT(13)
|
||||
# define SCALER_DISPSTAT_COBLOW(x) BIT(13 + ((x) * 8))
|
||||
/* Set when the DISPEOLN line is done compositing. */
|
||||
# define SCALER_DISPSTAT_EOLN0 BIT(12)
|
||||
# define SCALER_DISPSTAT_EOLN(x) BIT(12 + ((x) * 8))
|
||||
/* Set when VSTART is seen but there are still pixels in the current
|
||||
* output line.
|
||||
*/
|
||||
# define SCALER_DISPSTAT_ESFRAME0 BIT(11)
|
||||
# define SCALER_DISPSTAT_ESFRAME(x) BIT(11 + ((x) * 8))
|
||||
/* Set when HSTART is seen but there are still pixels in the current
|
||||
* output line.
|
||||
*/
|
||||
# define SCALER_DISPSTAT_ESLINE0 BIT(10)
|
||||
# define SCALER_DISPSTAT_ESLINE(x) BIT(10 + ((x) * 8))
|
||||
/* Set when the the downstream tries to read from the display FIFO
|
||||
* while it's empty.
|
||||
*/
|
||||
# define SCALER_DISPSTAT_EUFLOW0 BIT(9)
|
||||
# define SCALER_DISPSTAT_EUFLOW(x) BIT(9 + ((x) * 8))
|
||||
/* Set when the display mode changes from RUN to EOF */
|
||||
# define SCALER_DISPSTAT_EOF0 BIT(8)
|
||||
# define SCALER_DISPSTAT_EOF(x) BIT(8 + ((x) * 8))
|
||||
|
||||
# define SCALER_DISPSTAT_IRQMASK(x) VC4_MASK(13 + ((x) * 8), \
|
||||
8 + ((x) * 8))
|
||||
|
||||
/* Set on AXI invalid DMA ID error. */
|
||||
# define SCALER_DISPSTAT_DMA_ERROR BIT(7)
|
||||
|
|
@ -298,12 +281,10 @@
|
|||
* SCALER_DISPSTAT_RESP_ERROR is not SCALER_DISPSTAT_RESP_OKAY.
|
||||
*/
|
||||
# define SCALER_DISPSTAT_IRQDMA BIT(4)
|
||||
# define SCALER_DISPSTAT_IRQDISP2 BIT(3)
|
||||
# define SCALER_DISPSTAT_IRQDISP1 BIT(2)
|
||||
/* Set when any of the EOF/EOLN/ESFRAME/ESLINE bits are set and their
|
||||
* corresponding interrupt bit is enabled in DISPCTRL.
|
||||
*/
|
||||
# define SCALER_DISPSTAT_IRQDISP0 BIT(1)
|
||||
# define SCALER_DISPSTAT_IRQDISP(x) BIT(1 + (x))
|
||||
/* On read, the profiler interrupt. On write, clear *all* interrupt bits. */
|
||||
# define SCALER_DISPSTAT_IRQSCL BIT(0)
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue