i2c: imx: defer probe if bus recovery GPIOs are not ready

Some SoC might load the GPIO driver after the I2C driver and
using the I2C bus recovery mechanism via GPIOs. In this case
it is crucial to defer probing if the GPIO request functions
do so, otherwise the I2C driver gets loaded without recovery
mechanisms enabled.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
This commit is contained in:
Stefan Agner 2016-09-26 17:18:58 -07:00 committed by Wolfram Sang
parent 171e23e150
commit 533169d164
1 changed files with 7 additions and 4 deletions

View File

@ -1009,10 +1009,13 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
if (!gpio_is_valid(rinfo->sda_gpio) ||
!gpio_is_valid(rinfo->scl_gpio) ||
IS_ERR(i2c_imx->pinctrl_pins_default) ||
IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
if (rinfo->sda_gpio == -EPROBE_DEFER ||
rinfo->scl_gpio == -EPROBE_DEFER) {
return -EPROBE_DEFER;
} else if (!gpio_is_valid(rinfo->sda_gpio) ||
!gpio_is_valid(rinfo->scl_gpio) ||
IS_ERR(i2c_imx->pinctrl_pins_default) ||
IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
dev_dbg(&pdev->dev, "recovery information incomplete\n");
return 0;
}