Merge airlied/drm-next into drm-misc-next
It's been a while since we've backmerged drm-next. Dave just brought back 4.15-rc8, so now's a good time to freshen things up around here. Signed-off-by: Sean Paul <seanpaul@chromium.org>
This commit is contained in:
Sean Paul
commit
54156da893
1
.mailmap
1
.mailmap
|
|
@ -107,6 +107,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
|
|||
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
|
||||
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
|
||||
Mark Brown <broonie@sirena.org.uk>
|
||||
Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
|
||||
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
|
||||
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
|
||||
Matthieu CASTET <castet.matthieu@free.fr>
|
||||
|
|
|
|||
|
|
@ -375,3 +375,19 @@ Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|||
Description: information about CPUs heterogeneity.
|
||||
|
||||
cpu_capacity: capacity of cpu#.
|
||||
|
||||
What: /sys/devices/system/cpu/vulnerabilities
|
||||
/sys/devices/system/cpu/vulnerabilities/meltdown
|
||||
/sys/devices/system/cpu/vulnerabilities/spectre_v1
|
||||
/sys/devices/system/cpu/vulnerabilities/spectre_v2
|
||||
Date: January 2018
|
||||
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
||||
Description: Information about CPU vulnerabilities
|
||||
|
||||
The files are named after the code names of CPU
|
||||
vulnerabilities. The output of those files reflects the
|
||||
state of the CPUs in the system. Possible output values:
|
||||
|
||||
"Not affected" CPU is not affected by the vulnerability
|
||||
"Vulnerable" CPU is affected and no mitigation in effect
|
||||
"Mitigation: $M" CPU is affected and mitigation $M is in effect
|
||||
|
|
|
|||
|
|
@ -109,6 +109,7 @@ parameter is applicable::
|
|||
IPV6 IPv6 support is enabled.
|
||||
ISAPNP ISA PnP code is enabled.
|
||||
ISDN Appropriate ISDN support is enabled.
|
||||
ISOL CPU Isolation is enabled.
|
||||
JOY Appropriate joystick support is enabled.
|
||||
KGDB Kernel debugger support is enabled.
|
||||
KVM Kernel Virtual Machine support is enabled.
|
||||
|
|
|
|||
|
|
@ -328,11 +328,15 @@
|
|||
not play well with APC CPU idle - disable it if you have
|
||||
APC and your system crashes randomly.
|
||||
|
||||
apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
|
||||
apic= [APIC,X86] Advanced Programmable Interrupt Controller
|
||||
Change the output verbosity whilst booting
|
||||
Format: { quiet (default) | verbose | debug }
|
||||
Change the amount of debugging information output
|
||||
when initialising the APIC and IO-APIC components.
|
||||
For X86-32, this can also be used to specify an APIC
|
||||
driver name.
|
||||
Format: apic=driver_name
|
||||
Examples: apic=bigsmp
|
||||
|
||||
apic_extnmi= [APIC,X86] External NMI delivery setting
|
||||
Format: { bsp (default) | all | none }
|
||||
|
|
@ -709,9 +713,6 @@
|
|||
It will be ignored when crashkernel=X,high is not used
|
||||
or memory reserved is below 4G.
|
||||
|
||||
crossrelease_fullstack
|
||||
[KNL] Allow to record full stack trace in cross-release
|
||||
|
||||
cryptomgr.notests
|
||||
[KNL] Disable crypto self-tests
|
||||
|
||||
|
|
@ -1737,7 +1738,7 @@
|
|||
isapnp= [ISAPNP]
|
||||
Format: <RDP>,<reset>,<pci_scan>,<verbosity>
|
||||
|
||||
isolcpus= [KNL,SMP] Isolate a given set of CPUs from disturbance.
|
||||
isolcpus= [KNL,SMP,ISOL] Isolate a given set of CPUs from disturbance.
|
||||
[Deprecated - use cpusets instead]
|
||||
Format: [flag-list,]<cpu-list>
|
||||
|
||||
|
|
@ -2622,6 +2623,11 @@
|
|||
nosmt [KNL,S390] Disable symmetric multithreading (SMT).
|
||||
Equivalent to smt=1.
|
||||
|
||||
nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2
|
||||
(indirect branch prediction) vulnerability. System may
|
||||
allow data leaks with this option, which is equivalent
|
||||
to spectre_v2=off.
|
||||
|
||||
noxsave [BUGS=X86] Disables x86 extended register state save
|
||||
and restore using xsave. The kernel will fallback to
|
||||
enabling legacy floating-point and sse state.
|
||||
|
|
@ -2662,7 +2668,7 @@
|
|||
Valid arguments: on, off
|
||||
Default: on
|
||||
|
||||
nohz_full= [KNL,BOOT]
|
||||
nohz_full= [KNL,BOOT,SMP,ISOL]
|
||||
The argument is a cpu list, as described above.
|
||||
In kernels built with CONFIG_NO_HZ_FULL=y, set
|
||||
the specified list of CPUs whose tick will be stopped
|
||||
|
|
@ -3094,6 +3100,12 @@
|
|||
pcie_scan_all Scan all possible PCIe devices. Otherwise we
|
||||
only look for one device below a PCIe downstream
|
||||
port.
|
||||
big_root_window Try to add a big 64bit memory window to the PCIe
|
||||
root complex on AMD CPUs. Some GFX hardware
|
||||
can resize a BAR to allow access to all VRAM.
|
||||
Adding the window is slightly risky (it may
|
||||
conflict with unreported devices), so this
|
||||
taints the kernel.
|
||||
|
||||
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
|
||||
Management.
|
||||
|
|
@ -3282,6 +3294,21 @@
|
|||
pt. [PARIDE]
|
||||
See Documentation/blockdev/paride.txt.
|
||||
|
||||
pti= [X86_64] Control Page Table Isolation of user and
|
||||
kernel address spaces. Disabling this feature
|
||||
removes hardening, but improves performance of
|
||||
system calls and interrupts.
|
||||
|
||||
on - unconditionally enable
|
||||
off - unconditionally disable
|
||||
auto - kernel detects whether your CPU model is
|
||||
vulnerable to issues that PTI mitigates
|
||||
|
||||
Not specifying this option is equivalent to pti=auto.
|
||||
|
||||
nopti [X86_64]
|
||||
Equivalent to pti=off
|
||||
|
||||
pty.legacy_count=
|
||||
[KNL] Number of legacy pty's. Overwrites compiled-in
|
||||
default number.
|
||||
|
|
@ -3931,6 +3958,29 @@
|
|||
sonypi.*= [HW] Sony Programmable I/O Control Device driver
|
||||
See Documentation/laptops/sonypi.txt
|
||||
|
||||
spectre_v2= [X86] Control mitigation of Spectre variant 2
|
||||
(indirect branch speculation) vulnerability.
|
||||
|
||||
on - unconditionally enable
|
||||
off - unconditionally disable
|
||||
auto - kernel detects whether your CPU model is
|
||||
vulnerable
|
||||
|
||||
Selecting 'on' will, and 'auto' may, choose a
|
||||
mitigation method at run time according to the
|
||||
CPU, the available microcode, the setting of the
|
||||
CONFIG_RETPOLINE configuration option, and the
|
||||
compiler with which the kernel was built.
|
||||
|
||||
Specific mitigations can also be selected manually:
|
||||
|
||||
retpoline - replace indirect branches
|
||||
retpoline,generic - google's original retpoline
|
||||
retpoline,amd - AMD-specific minimal thunk
|
||||
|
||||
Not specifying this option is equivalent to
|
||||
spectre_v2=auto.
|
||||
|
||||
spia_io_base= [HW,MTD]
|
||||
spia_fio_base=
|
||||
spia_pedr=
|
||||
|
|
|
|||
|
|
@ -230,7 +230,7 @@ If supported by your machine this will be exposed by the WMI bus with
|
|||
a sysfs attribute called "force_power".
|
||||
|
||||
For example the intel-wmi-thunderbolt driver exposes this attribute in:
|
||||
/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
|
||||
/sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
|
||||
|
||||
To force the power to on, write 1 to this attribute file.
|
||||
To disable force power, write 0 to this attribute file.
|
||||
|
|
|
|||
|
|
@ -75,3 +75,4 @@ stable kernels.
|
|||
| Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 |
|
||||
| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
|
||||
| Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 |
|
||||
| Qualcomm Tech. | Falkor v{1,2} | E1041 | QCOM_FALKOR_ERRATUM_1041 |
|
||||
|
|
|
|||
|
|
@ -898,6 +898,13 @@ controller implements weight and absolute bandwidth limit models for
|
|||
normal scheduling policy and absolute bandwidth allocation model for
|
||||
realtime scheduling policy.
|
||||
|
||||
WARNING: cgroup2 doesn't yet support control of realtime processes and
|
||||
the cpu controller can only be enabled when all RT processes are in
|
||||
the root cgroup. Be aware that system management software may already
|
||||
have placed RT processes into nonroot cgroups during the system boot
|
||||
process, and these processes may need to be moved to the root cgroup
|
||||
before the cpu controller can be enabled.
|
||||
|
||||
|
||||
CPU Interface Files
|
||||
~~~~~~~~~~~~~~~~~~~
|
||||
|
|
|
|||
|
|
@ -225,9 +225,9 @@ interrupts.
|
|||
|
||||
The following control flow is implemented (simplified excerpt)::
|
||||
|
||||
:c:func:`desc->irq_data.chip->irq_mask_ack`;
|
||||
desc->irq_data.chip->irq_mask_ack();
|
||||
handle_irq_event(desc->action);
|
||||
:c:func:`desc->irq_data.chip->irq_unmask`;
|
||||
desc->irq_data.chip->irq_unmask();
|
||||
|
||||
|
||||
Default Fast EOI IRQ flow handler
|
||||
|
|
@ -239,7 +239,7 @@ which only need an EOI at the end of the handler.
|
|||
The following control flow is implemented (simplified excerpt)::
|
||||
|
||||
handle_irq_event(desc->action);
|
||||
:c:func:`desc->irq_data.chip->irq_eoi`;
|
||||
desc->irq_data.chip->irq_eoi();
|
||||
|
||||
|
||||
Default Edge IRQ flow handler
|
||||
|
|
@ -251,15 +251,15 @@ interrupts.
|
|||
The following control flow is implemented (simplified excerpt)::
|
||||
|
||||
if (desc->status & running) {
|
||||
:c:func:`desc->irq_data.chip->irq_mask_ack`;
|
||||
desc->irq_data.chip->irq_mask_ack();
|
||||
desc->status |= pending | masked;
|
||||
return;
|
||||
}
|
||||
:c:func:`desc->irq_data.chip->irq_ack`;
|
||||
desc->irq_data.chip->irq_ack();
|
||||
desc->status |= running;
|
||||
do {
|
||||
if (desc->status & masked)
|
||||
:c:func:`desc->irq_data.chip->irq_unmask`;
|
||||
desc->irq_data.chip->irq_unmask();
|
||||
desc->status &= ~pending;
|
||||
handle_irq_event(desc->action);
|
||||
} while (status & pending);
|
||||
|
|
@ -293,10 +293,10 @@ simplified version without locking.
|
|||
The following control flow is implemented (simplified excerpt)::
|
||||
|
||||
if (desc->irq_data.chip->irq_ack)
|
||||
:c:func:`desc->irq_data.chip->irq_ack`;
|
||||
desc->irq_data.chip->irq_ack();
|
||||
handle_irq_event(desc->action);
|
||||
if (desc->irq_data.chip->irq_eoi)
|
||||
:c:func:`desc->irq_data.chip->irq_eoi`;
|
||||
desc->irq_data.chip->irq_eoi();
|
||||
|
||||
|
||||
EOI Edge IRQ flow handler
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ Required properties:
|
|||
|
||||
Example:
|
||||
|
||||
ccn@0x2000000000 {
|
||||
ccn@2000000000 {
|
||||
compatible = "arm,ccn-504";
|
||||
reg = <0x20 0x00000000 0 0x1000000>;
|
||||
interrupts = <0 181 4>;
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use:
|
|||
interrupts = <GIC_SPI request_number interrupt_level>
|
||||
|
||||
Example:
|
||||
device_x@0x4a023000 {
|
||||
device_x@4a023000 {
|
||||
/* Crossbar 8 used */
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
||||
...
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ Required properties:
|
|||
- interrupts : Should contain MC General interrupt.
|
||||
|
||||
Example:
|
||||
memory-controller@0x7000f000 {
|
||||
memory-controller@7000f000 {
|
||||
compatible = "nvidia,tegra20-mc";
|
||||
reg = <0x7000f000 0x024
|
||||
0x7000f03c 0x3c4>;
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ Optional properties:
|
|||
- clock-output-names : From common clock binding.
|
||||
|
||||
Example:
|
||||
clock@0xff000000 {
|
||||
clock@ff000000 {
|
||||
compatible = "adi,axi-clkgen";
|
||||
#clock-cells = <0>;
|
||||
reg = <0xff000000 0x1000>;
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ Example:
|
|||
clocks = <&clk_osc>;
|
||||
};
|
||||
|
||||
aux: aux@0x7e215004 {
|
||||
aux: aux@7e215004 {
|
||||
compatible = "brcm,bcm2835-aux";
|
||||
#clock-cells = <1>;
|
||||
reg = <0x7e215000 0x8>;
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ tree sources.
|
|||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10030000 {
|
||||
clock: clock-controller@10030000 {
|
||||
compatible = "samsung,exynos4210-clock";
|
||||
reg = <0x10030000 0x20000>;
|
||||
#clock-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ tree sources.
|
|||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5250-clock";
|
||||
reg = <0x10010000 0x30000>;
|
||||
#clock-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below.
|
|||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5410-clock";
|
||||
reg = <0x10010000 0x30000>;
|
||||
#clock-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ tree sources.
|
|||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5420-clock";
|
||||
reg = <0x10010000 0x30000>;
|
||||
#clock-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -21,7 +21,7 @@ tree sources.
|
|||
|
||||
Example: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5440-clock";
|
||||
reg = <0x160000 0x10000>;
|
||||
#clock-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ Required properties:
|
|||
|
||||
Example:
|
||||
|
||||
pllctrl: pll-controller@0x02310000 {
|
||||
pllctrl: pll-controller@02310000 {
|
||||
compatible = "ti,keystone-pllctrl", "syscon";
|
||||
reg = <0x02310000 0x200>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
|
|||
for the full list of zx296702 clock IDs.
|
||||
|
||||
|
||||
topclk: topcrm@0x09800000 {
|
||||
topclk: topcrm@09800000 {
|
||||
compatible = "zte,zx296702-topcrm-clk";
|
||||
reg = <0x09800000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
uart0: serial@0x09405000 {
|
||||
uart0: serial@09405000 {
|
||||
compatible = "zte,zx296702-uart";
|
||||
reg = <0x09405000 0x1000>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -456,7 +456,7 @@ System ON/OFF key driver
|
|||
Definition: this is phandle to the register map node.
|
||||
|
||||
EXAMPLE:
|
||||
snvs-pwrkey@0x020cc000 {
|
||||
snvs-pwrkey@020cc000 {
|
||||
compatible = "fsl,sec-v4.0-pwrkey";
|
||||
regmap = <&snvs>;
|
||||
interrupts = <0 4 0x4>
|
||||
|
|
@ -545,7 +545,7 @@ FULL EXAMPLE
|
|||
interrupts = <93 2>;
|
||||
};
|
||||
|
||||
snvs-pwrkey@0x020cc000 {
|
||||
snvs-pwrkey@020cc000 {
|
||||
compatible = "fsl,sec-v4.0-pwrkey";
|
||||
regmap = <&sec_mon>;
|
||||
interrupts = <0 4 0x4>;
|
||||
|
|
|
|||
|
|
@ -9,7 +9,7 @@ Required properties:
|
|||
- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
|
||||
|
||||
Example:
|
||||
dfi: dfi@0xff630000 {
|
||||
dfi: dfi@ff630000 {
|
||||
compatible = "rockchip,rk3399-dfi";
|
||||
reg = <0x00 0xff630000 0x00 0x4000>;
|
||||
rockchip,pmu = <&pmugrf>;
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
fb0: fb@0x00500000 {
|
||||
fb0: fb@00500000 {
|
||||
compatible = "atmel,at91sam9g45-lcdc";
|
||||
reg = <0x00500000 0x1000>;
|
||||
interrupts = <23 3 0>;
|
||||
|
|
@ -41,7 +41,7 @@ Example:
|
|||
|
||||
Example for fixed framebuffer memory:
|
||||
|
||||
fb0: fb@0x00500000 {
|
||||
fb0: fb@00500000 {
|
||||
compatible = "atmel,at91sam9263-lcdc";
|
||||
reg = <0x00700000 0x1000 0x70000000 0x200000>;
|
||||
[...]
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@ Toppoly TD028TTEC1 Panel
|
|||
========================
|
||||
|
||||
Required properties:
|
||||
- compatible: "toppoly,td028ttec1"
|
||||
- compatible: "tpo,td028ttec1"
|
||||
|
||||
Optional properties:
|
||||
- label: a symbolic name for the panel
|
||||
|
|
@ -14,7 +14,7 @@ Example
|
|||
-------
|
||||
|
||||
lcd-panel: td028ttec1@0 {
|
||||
compatible = "toppoly,td028ttec1";
|
||||
compatible = "tpo,td028ttec1";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <100000>;
|
||||
spi-cpol;
|
||||
|
|
@ -3,6 +3,8 @@
|
|||
Required Properties:
|
||||
|
||||
- compatible: must be one of the following.
|
||||
- "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
|
||||
- "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
|
||||
- "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
|
||||
- "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
|
||||
- "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
|
||||
|
|
@ -27,10 +29,10 @@ Required Properties:
|
|||
- clock-names: Name of the clocks. This property is model-dependent.
|
||||
- R8A7779 uses a single functional clock. The clock doesn't need to be
|
||||
named.
|
||||
- R8A779[0123456] use one functional clock per channel and one clock per
|
||||
LVDS encoder (if available). The functional clocks must be named "du.x"
|
||||
with "x" being the channel numerical index. The LVDS clocks must be
|
||||
named "lvds.x" with "x" being the LVDS encoder numerical index.
|
||||
- All other DU instances use one functional clock per channel and one
|
||||
clock per LVDS encoder (if available). The functional clocks must be
|
||||
named "du.x" with "x" being the channel numerical index. The LVDS clocks
|
||||
must be named "lvds.x" with "x" being the LVDS encoder numerical index.
|
||||
- In addition to the functional and encoder clocks, all DU versions also
|
||||
support externally supplied pixel clocks. Those clocks are optional.
|
||||
When supplied they must be named "dclkin.x" with "x" being the input
|
||||
|
|
@ -49,16 +51,18 @@ bindings specified in Documentation/devicetree/bindings/graph.txt.
|
|||
The following table lists for each supported model the port number
|
||||
corresponding to each DU output.
|
||||
|
||||
Port 0 Port1 Port2 Port3
|
||||
Port0 Port1 Port2 Port3
|
||||
-----------------------------------------------------------------------------
|
||||
R8A7779 (H1) DPAD 0 DPAD 1 - -
|
||||
R8A7790 (H2) DPAD LVDS 0 LVDS 1 -
|
||||
R8A7791 (M2-W) DPAD LVDS 0 - -
|
||||
R8A7792 (V2H) DPAD 0 DPAD 1 - -
|
||||
R8A7793 (M2-N) DPAD LVDS 0 - -
|
||||
R8A7794 (E2) DPAD 0 DPAD 1 - -
|
||||
R8A7795 (H3) DPAD HDMI 0 HDMI 1 LVDS
|
||||
R8A7796 (M3-W) DPAD HDMI LVDS -
|
||||
R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - -
|
||||
R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - -
|
||||
R8A7779 (R-Car H1) DPAD 0 DPAD 1 - -
|
||||
R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 -
|
||||
R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - -
|
||||
R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - -
|
||||
R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - -
|
||||
R8A7794 (R-Car E2) DPAD 0 DPAD 1 - -
|
||||
R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0
|
||||
R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 -
|
||||
|
||||
|
||||
Example: R8A7795 (R-Car H3) ES2.0 DU
|
||||
|
|
|
|||
|
|
@ -206,21 +206,33 @@ of the following host1x client modules:
|
|||
- "nvidia,tegra132-sor": for Tegra132
|
||||
- "nvidia,tegra210-sor": for Tegra210
|
||||
- "nvidia,tegra210-sor1": for Tegra210
|
||||
- "nvidia,tegra186-sor": for Tegra186
|
||||
- "nvidia,tegra186-sor1": for Tegra186
|
||||
- reg: Physical base address and length of the controller's registers.
|
||||
- interrupts: The interrupt outputs from the controller.
|
||||
- clocks: Must contain an entry for each entry in clock-names.
|
||||
See ../clocks/clock-bindings.txt for details.
|
||||
- clock-names: Must include the following entries:
|
||||
- sor: clock input for the SOR hardware
|
||||
- source: source clock for the SOR clock
|
||||
- out: SOR output clock
|
||||
- parent: input for the pixel clock
|
||||
- dp: reference clock for the SOR clock
|
||||
- safe: safe reference for the SOR clock during power up
|
||||
|
||||
For Tegra186 and later:
|
||||
- pad: SOR pad output clock (on Tegra186 and later)
|
||||
|
||||
Obsolete:
|
||||
- source: source clock for the SOR clock (obsolete, use "out" instead)
|
||||
|
||||
- resets: Must contain an entry for each entry in reset-names.
|
||||
See ../reset/reset.txt for details.
|
||||
- reset-names: Must include the following entries:
|
||||
- sor
|
||||
|
||||
Required properties on Tegra186 and later:
|
||||
- nvidia,interface: index of the SOR interface
|
||||
|
||||
Optional properties:
|
||||
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
|
||||
- nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
|
||||
|
|
|
|||
|
|
@ -47,6 +47,11 @@ Required properties:
|
|||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
Optional properties:
|
||||
- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
|
||||
in bytes per second
|
||||
|
||||
|
||||
HDMI
|
||||
----
|
||||
|
||||
|
|
|
|||
|
|
@ -28,6 +28,10 @@ Required properties:
|
|||
- ti,hwmods: "dss_dispc"
|
||||
- interrupts: the DISPC interrupt
|
||||
|
||||
Optional properties:
|
||||
- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
|
||||
in bytes per second
|
||||
|
||||
|
||||
RFBI
|
||||
----
|
||||
|
|
|
|||
|
|
@ -37,6 +37,10 @@ Required properties:
|
|||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
Optional properties:
|
||||
- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
|
||||
in bytes per second
|
||||
|
||||
|
||||
RFBI
|
||||
----
|
||||
|
|
|
|||
|
|
@ -36,6 +36,10 @@ Required properties:
|
|||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
Optional properties:
|
||||
- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
|
||||
in bytes per second
|
||||
|
||||
|
||||
RFBI
|
||||
----
|
||||
|
|
|
|||
|
|
@ -36,6 +36,10 @@ Required properties:
|
|||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
Optional properties:
|
||||
- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
|
||||
in bytes per second
|
||||
|
||||
|
||||
RFBI
|
||||
----
|
||||
|
|
|
|||
|
|
@ -73,7 +73,7 @@ Hypervisor OS configuration:
|
|||
max-read-transactions = <31>;
|
||||
channel-reset-timeout-cycles = <0x500>;
|
||||
|
||||
hidma_24: dma-controller@0x5c050000 {
|
||||
hidma_24: dma-controller@5c050000 {
|
||||
compatible = "qcom,hidma-1.0";
|
||||
reg = <0 0x5c050000 0x0 0x1000>,
|
||||
<0 0x5c0b0000 0x0 0x1000>;
|
||||
|
|
@ -85,7 +85,7 @@ Hypervisor OS configuration:
|
|||
|
||||
Guest OS configuration:
|
||||
|
||||
hidma_24: dma-controller@0x5c050000 {
|
||||
hidma_24: dma-controller@5c050000 {
|
||||
compatible = "qcom,hidma-1.0";
|
||||
reg = <0 0x5c050000 0x0 0x1000>,
|
||||
<0 0x5c0b0000 0x0 0x1000>;
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ Required properties:
|
|||
Example:
|
||||
|
||||
Controller:
|
||||
dma: dma-controller@0x09c00000{
|
||||
dma: dma-controller@09c00000{
|
||||
compatible = "zte,zx296702-dma";
|
||||
reg = <0x09c00000 0x1000>;
|
||||
clocks = <&topclk ZX296702_DMA_ACLK>;
|
||||
|
|
|
|||
|
|
@ -1,7 +1,12 @@
|
|||
EEPROMs (SPI) compatible with Atmel at25.
|
||||
|
||||
Required properties:
|
||||
- compatible : "atmel,at25".
|
||||
- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
|
||||
Example "<vendor>,<type>" values:
|
||||
"microchip,25lc040"
|
||||
"st,m95m02"
|
||||
"st,m95256"
|
||||
|
||||
- reg : chip select number
|
||||
- spi-max-frequency : max spi frequency to use
|
||||
- pagesize : size of the eeprom page
|
||||
|
|
@ -13,7 +18,7 @@ Optional properties:
|
|||
- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
|
||||
- read-only : this parameter-less property disables writes to the eeprom
|
||||
|
||||
Obsolete legacy properties are can be used in place of "size", "pagesize",
|
||||
Obsolete legacy properties can be used in place of "size", "pagesize",
|
||||
"address-width", and "read-only":
|
||||
- at25,byte-len : total eeprom size in bytes
|
||||
- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
|
||||
|
|
@ -22,8 +27,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize",
|
|||
Additional compatible properties are also allowed.
|
||||
|
||||
Example:
|
||||
at25@0 {
|
||||
compatible = "atmel,at25", "st,m95256";
|
||||
eeprom@0 {
|
||||
compatible = "st,m95256", "atmel,at25";
|
||||
reg = <0>
|
||||
spi-max-frequency = <5000000>;
|
||||
spi-cpha;
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
gpio_altr: gpio@0xff200000 {
|
||||
gpio_altr: gpio@ff200000 {
|
||||
compatible = "altr,pio-1.0";
|
||||
reg = <0xff200000 0x10>;
|
||||
interrupts = <0 45 4>;
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ Required properties:
|
|||
ti,tca6424
|
||||
ti,tca9539
|
||||
ti,tca9554
|
||||
onsemi,pca9654
|
||||
onnn,pca9654
|
||||
exar,xra1202
|
||||
|
||||
Optional properties:
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@ Optional properties:
|
|||
Example
|
||||
|
||||
/ {
|
||||
i2c4: i2c4@0x10054000 {
|
||||
i2c4: i2c4@10054000 {
|
||||
compatible = "ingenic,jz4780-i2c";
|
||||
reg = <0x10054000 0x1000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ Required properties:
|
|||
|
||||
Example:
|
||||
|
||||
hp03@0x77 {
|
||||
hp03@77 {
|
||||
compatible = "hoperf,hp03";
|
||||
reg = <0x77>;
|
||||
xclr-gpio = <&portc 0 0x0>;
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ Optional properties:
|
|||
Example:
|
||||
|
||||
i2c@80110000 {
|
||||
bu21013_tp@0x5c {
|
||||
bu21013_tp@5c {
|
||||
compatible = "rohm,bu21013_tp";
|
||||
reg = <0x5c>;
|
||||
touch-gpio = <&gpio2 20 0x4>;
|
||||
|
|
|
|||
|
|
@ -155,7 +155,7 @@ Example:
|
|||
<0x0 0xe112f000 0 0x02000>,
|
||||
<0x0 0xe1140000 0 0x10000>,
|
||||
<0x0 0xe1160000 0 0x10000>;
|
||||
v2m0: v2m@0x8000 {
|
||||
v2m0: v2m@8000 {
|
||||
compatible = "arm,gic-v2m-frame";
|
||||
msi-controller;
|
||||
reg = <0x0 0x80000 0 0x1000>;
|
||||
|
|
@ -163,7 +163,7 @@ Example:
|
|||
|
||||
....
|
||||
|
||||
v2mN: v2m@0x9000 {
|
||||
v2mN: v2m@9000 {
|
||||
compatible = "arm,gic-v2m-frame";
|
||||
msi-controller;
|
||||
reg = <0x0 0x90000 0 0x1000>;
|
||||
|
|
|
|||
|
|
@ -71,7 +71,7 @@ Example 2:
|
|||
* An interrupt generating device that is wired to a Meta external
|
||||
* trigger block.
|
||||
*/
|
||||
uart1: uart@0x02004c00 {
|
||||
uart1: uart@02004c00 {
|
||||
// Interrupt source '5' that is level-sensitive.
|
||||
// Note that there are only two cells as specified in the
|
||||
// interrupt parent's '#interrupt-cells' property.
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@ Example 1:
|
|||
/*
|
||||
* TZ1090 PDC block
|
||||
*/
|
||||
pdc: pdc@0x02006000 {
|
||||
pdc: pdc@02006000 {
|
||||
// This is an interrupt controller node.
|
||||
interrupt-controller;
|
||||
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ Example:
|
|||
|
||||
The following is an example from the SPEAr320 SoC dtsi file.
|
||||
|
||||
shirq: interrupt-controller@0xb3000000 {
|
||||
shirq: interrupt-controller@b3000000 {
|
||||
compatible = "st,spear320-shirq";
|
||||
reg = <0xb3000000 0x1000>;
|
||||
interrupts = <28 29 30 1>;
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ Optional properties:
|
|||
depends on the interrupt controller parent.
|
||||
|
||||
Example:
|
||||
mbox_tx: mailbox@0x100 {
|
||||
mbox_tx: mailbox@100 {
|
||||
compatible = "altr,mailbox-1.0";
|
||||
reg = <0x100 0x8>;
|
||||
interrupt-parent = < &gic_0 >;
|
||||
|
|
@ -22,7 +22,7 @@ Example:
|
|||
#mbox-cells = <1>;
|
||||
};
|
||||
|
||||
mbox_rx: mailbox@0x200 {
|
||||
mbox_rx: mailbox@200 {
|
||||
compatible = "altr,mailbox-1.0";
|
||||
reg = <0x200 0x8>;
|
||||
interrupt-parent = < &gic_0 >;
|
||||
|
|
@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be
|
|||
used to give a name to the communication channel to be used by the client user.
|
||||
|
||||
Example:
|
||||
mclient0: mclient0@0x400 {
|
||||
mclient0: mclient0@400 {
|
||||
compatible = "client-1.0";
|
||||
reg = <0x400 0x10>;
|
||||
mbox-names = "mbox-tx", "mbox-rx";
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ Optional properties:
|
|||
- brcm,use-bcm-hdr: present if a BCM header precedes each frame.
|
||||
|
||||
Example:
|
||||
pdc0: iproc-pdc0@0x612c0000 {
|
||||
pdc0: iproc-pdc0@612c0000 {
|
||||
compatible = "brcm,iproc-pdc-mbox";
|
||||
reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */
|
||||
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
gsc_0: gsc@0x13e00000 {
|
||||
gsc_0: gsc@13e00000 {
|
||||
compatible = "samsung,exynos5250-gsc";
|
||||
reg = <0x13e00000 0x1000>;
|
||||
interrupts = <0 85 0>;
|
||||
|
|
|
|||
|
|
@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 {
|
|||
"vdec_bus_clk_src";
|
||||
};
|
||||
|
||||
vcodec_enc: vcodec@0x18002000 {
|
||||
vcodec_enc: vcodec@18002000 {
|
||||
compatible = "mediatek,mt8173-vcodec-enc";
|
||||
reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
|
||||
<0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ Device node example
|
|||
vin0 = &vin0;
|
||||
};
|
||||
|
||||
vin0: vin@0xe6ef0000 {
|
||||
vin0: vin@e6ef0000 {
|
||||
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
|
||||
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
|
||||
reg = <0 0xe6ef0000 0 0x1000>;
|
||||
|
|
|
|||
|
|
@ -138,7 +138,7 @@ Example:
|
|||
};
|
||||
|
||||
/* MIPI CSI-2 bus IF sensor */
|
||||
s5c73m3: sensor@0x1a {
|
||||
s5c73m3: sensor@1a {
|
||||
compatible = "samsung,s5c73m3";
|
||||
reg = <0x1a>;
|
||||
vddio-supply = <...>;
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver:
|
|||
|
||||
Example:
|
||||
|
||||
ceu0: ceu@0xfe910000 {
|
||||
ceu0: ceu@fe910000 {
|
||||
compatible = "renesas,sh-mobile-ceu";
|
||||
reg = <0xfe910000 0xa0>;
|
||||
interrupt-parent = <&intcs>;
|
||||
|
|
|
|||
|
|
@ -154,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
|
|||
'port' node which may indicate that at any time only one of the following data
|
||||
pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
||||
|
||||
ceu0: ceu@0xfe910000 {
|
||||
ceu0: ceu@fe910000 {
|
||||
compatible = "renesas,sh-mobile-ceu";
|
||||
reg = <0xfe910000 0xa0>;
|
||||
interrupts = <0x880>;
|
||||
|
|
@ -193,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
|||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@0xfff20000 {
|
||||
i2c0: i2c@fff20000 {
|
||||
...
|
||||
ov772x_1: camera@0x21 {
|
||||
ov772x_1: camera@21 {
|
||||
compatible = "ovti,ov772x";
|
||||
reg = <0x21>;
|
||||
vddio-supply = <®ulator1>;
|
||||
|
|
@ -219,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
|||
};
|
||||
};
|
||||
|
||||
imx074: camera@0x1a {
|
||||
imx074: camera@1a {
|
||||
compatible = "sony,imx074";
|
||||
reg = <0x1a>;
|
||||
vddio-supply = <®ulator1>;
|
||||
|
|
@ -239,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
|||
};
|
||||
};
|
||||
|
||||
csi2: csi2@0xffc90000 {
|
||||
csi2: csi2@ffc90000 {
|
||||
compatible = "renesas,sh-mobile-csi2";
|
||||
reg = <0xffc90000 0x1000>;
|
||||
interrupts = <0x17a0>;
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
emif1: emif@0x4c000000 {
|
||||
emif1: emif@4c000000 {
|
||||
compatible = "ti,emif-4d";
|
||||
ti,hwmods = "emif2";
|
||||
phy-type = <1>;
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ Required properties:
|
|||
|
||||
Example:
|
||||
|
||||
devctrl: device-state-control@0x02620000 {
|
||||
devctrl: device-state-control@02620000 {
|
||||
compatible = "ti,keystone-devctrl", "syscon";
|
||||
reg = <0x02620000 0x1000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -9,7 +9,7 @@ Required properties:
|
|||
- reg : Location and size of bounce buffer
|
||||
|
||||
Example:
|
||||
smc@0x3404c000 {
|
||||
smc@3404c000 {
|
||||
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
|
||||
reg = <0x3404c000 0x400>; //1 KiB in SRAM
|
||||
};
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties.
|
|||
|
||||
Example:
|
||||
|
||||
sdio2: sdio@0x3f1a0000 {
|
||||
sdio2: sdio@3f1a0000 {
|
||||
compatible = "brcm,kona-sdhci";
|
||||
reg = <0x3f1a0000 0x10000>;
|
||||
clocks = <&sdio3_clk>;
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
sdhci0: sdhci@0x18041000 {
|
||||
sdhci0: sdhci@18041000 {
|
||||
compatible = "brcm,sdhci-iproc-cygnus";
|
||||
reg = <0x18041000 0x100>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ Examples:
|
|||
|
||||
[hwmod populated DMA resources]
|
||||
|
||||
mmc1: mmc@0x4809c000 {
|
||||
mmc1: mmc@4809c000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x4809c000 0x400>;
|
||||
ti,hwmods = "mmc1";
|
||||
|
|
@ -67,7 +67,7 @@ Examples:
|
|||
|
||||
[generic DMA request binding]
|
||||
|
||||
mmc1: mmc@0x4809c000 {
|
||||
mmc1: mmc@4809c000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x4809c000 0x400>;
|
||||
ti,hwmods = "mmc1";
|
||||
|
|
|
|||
|
|
@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 {
|
|||
label = "bootloader-nor";
|
||||
reg = <0 0x40000>;
|
||||
};
|
||||
partition@0x40000 {
|
||||
partition@40000 {
|
||||
label = "params-nor";
|
||||
reg = <0x40000 0x40000>;
|
||||
};
|
||||
partition@0x80000 {
|
||||
partition@80000 {
|
||||
label = "kernel-nor";
|
||||
reg = <0x80000 0x200000>;
|
||||
};
|
||||
partition@0x280000 {
|
||||
partition@280000 {
|
||||
label = "filesystem-nor";
|
||||
reg = <0x240000 0x7d80000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,7 +13,6 @@ Required properties:
|
|||
at25df321a
|
||||
at25df641
|
||||
at26df081a
|
||||
en25s64
|
||||
mr25h128
|
||||
mr25h256
|
||||
mr25h10
|
||||
|
|
@ -33,7 +32,6 @@ Required properties:
|
|||
s25fl008k
|
||||
s25fl064k
|
||||
sst25vf040b
|
||||
sst25wf040b
|
||||
m25p40
|
||||
m25p80
|
||||
m25p16
|
||||
|
|
|
|||
|
|
@ -131,7 +131,7 @@ Example:
|
|||
read-only;
|
||||
reg = <0x00000000 0x00400000>;
|
||||
};
|
||||
android@0x00400000 {
|
||||
android@00400000 {
|
||||
label = "android";
|
||||
reg = <0x00400000 0x12c00000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
|
||||
tse_sub_0_eth_tse_0: ethernet@1,00000000 {
|
||||
compatible = "altr,tse-msgdma-1.0";
|
||||
reg = <0x00000001 0x00000000 0x00000400>,
|
||||
<0x00000001 0x00000460 0x00000020>,
|
||||
|
|
@ -90,7 +90,7 @@ Example:
|
|||
};
|
||||
};
|
||||
|
||||
tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
|
||||
tse_sub_1_eth_tse_0: ethernet@1,00001000 {
|
||||
compatible = "altr,tse-msgdma-1.0";
|
||||
reg = <0x00000001 0x00001000 0x00000400>,
|
||||
<0x00000001 0x00001460 0x00000020>,
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@ Example :
|
|||
This example shows these optional properties, plus other properties
|
||||
required for the TI Davinci MDIO driver.
|
||||
|
||||
davinci_mdio: ethernet@0x5c030000 {
|
||||
davinci_mdio: ethernet@5c030000 {
|
||||
compatible = "ti,davinci_mdio";
|
||||
reg = <0x5c030000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ Required properties:
|
|||
|
||||
Example:
|
||||
|
||||
gmii_to_sgmii_converter: phy@0x100000240 {
|
||||
gmii_to_sgmii_converter: phy@100000240 {
|
||||
compatible = "altr,gmii-to-sgmii-2.0";
|
||||
reg = <0x00000001 0x00000240 0x00000008>,
|
||||
<0x00000001 0x00000200 0x00000040>;
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
cpu@0x0 {
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "altr,nios2-1.0";
|
||||
reg = <0>;
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ Optional properties:
|
|||
- bus-range: PCI bus numbers covered
|
||||
|
||||
Example
|
||||
pcie_0: pcie@0xc00000000 {
|
||||
pcie_0: pcie@c00000000 {
|
||||
compatible = "altr,pcie-root-port-1.0";
|
||||
reg = <0xc0000000 0x20000000>,
|
||||
<0xff220000 0x00004000>;
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie:
|
|||
|
||||
Example:
|
||||
|
||||
pcie@0x01000000 {
|
||||
pcie@01000000 {
|
||||
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
|
||||
reg = <0x01ffc000 0x04000>,
|
||||
<0x01f00000 0x80000>;
|
||||
|
|
|
|||
|
|
@ -21,7 +21,7 @@ Optional properties:
|
|||
- dma-coherent: Present if DMA operations are coherent.
|
||||
|
||||
Hip05 Example (note that Hip06 is the same except compatible):
|
||||
pcie@0xb0080000 {
|
||||
pcie@b0080000 {
|
||||
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
|
||||
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
|
||||
reg-names = "rc_dbi", "config";
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@ Optional properties:
|
|||
- usb3_vbus-supply : regulator phandle for controller usb3 vbus
|
||||
|
||||
Example:
|
||||
usbphy: phy@0x01c13400 {
|
||||
usbphy: phy@01c13400 {
|
||||
#phy-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-usb-phy";
|
||||
/* phy base regs, phy1 pmu reg, phy2 pmu reg */
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|||
|
||||
For example:
|
||||
|
||||
pinmux: pinmux@0x0301d0c8 {
|
||||
pinmux: pinmux@0301d0c8 {
|
||||
compatible = "brcm,cygnus-pinmux";
|
||||
reg = <0x0301d0c8 0x1b0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following:
|
|||
|
||||
For a specific board, if it wants to use sd1,
|
||||
it can add the following to its board-specific .dts file.
|
||||
sd1: sd@0x12340000 {
|
||||
sd1: sd@12340000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd1_pmx0>;
|
||||
}
|
||||
|
||||
or
|
||||
|
||||
sd1: sd@0x12340000 {
|
||||
sd1: sd@12340000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd1_pmx1>;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following:
|
|||
|
||||
For a specific board, if it wants to use uart2 without hardware flow control,
|
||||
it can add the following to its board-specific .dts file.
|
||||
uart2: uart@0xb0070000 {
|
||||
uart2: uart@b0070000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_noflow_pins_a>;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -136,7 +136,7 @@ Example for rk3188:
|
|||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gpio0: gpio0@0x2000a000 {
|
||||
gpio0: gpio0@2000a000 {
|
||||
compatible = "rockchip,rk3188-gpio-bank0";
|
||||
reg = <0x2000a000 0x100>;
|
||||
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -149,7 +149,7 @@ Example for rk3188:
|
|||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: gpio1@0x2003c000 {
|
||||
gpio1: gpio1@2003c000 {
|
||||
compatible = "rockchip,gpio-bank";
|
||||
reg = <0x2003c000 0x100>;
|
||||
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2),
|
|||
...
|
||||
};
|
||||
|
||||
mmc: mmc@0x0 {
|
||||
mmc: mmc@0 {
|
||||
...
|
||||
...
|
||||
vmmc-supply = <&twl_reg1>;
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
uart@0x4000c400 {
|
||||
uart@4000c400 {
|
||||
compatible = "energymicro,efm32-uart";
|
||||
reg = <0x4000c400 0x400>;
|
||||
interrupts = <15>;
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ Required properties:
|
|||
|
||||
|
||||
Example:
|
||||
ps20: ps2@0x01c2a000 {
|
||||
ps20: ps2@01c2a000 {
|
||||
compatible = "allwinner,sun4i-a10-ps2";
|
||||
reg = <0x01c2a000 0x400>;
|
||||
interrupts = <0 62 4>;
|
||||
|
|
|
|||
|
|
@ -220,7 +220,7 @@ qmss: qmss@2a40000 {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
pdsp0@0x2a10000 {
|
||||
pdsp0@2a10000 {
|
||||
reg = <0x2a10000 0x1000>,
|
||||
<0x2a0f000 0x100>,
|
||||
<0x2a0c000 0x3c8>,
|
||||
|
|
|
|||
|
|
@ -21,7 +21,7 @@ please check:
|
|||
|
||||
Example:
|
||||
|
||||
i2s: i2s@0x77600000 {
|
||||
i2s: i2s@77600000 {
|
||||
compatible = "adi,axi-i2s-1.00.a";
|
||||
reg = <0x77600000 0x1000>;
|
||||
clocks = <&clk 15>, <&audio_clock>;
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ please check:
|
|||
|
||||
Example:
|
||||
|
||||
spdif: spdif@0x77400000 {
|
||||
spdif: spdif@77400000 {
|
||||
compatible = "adi,axi-spdif-tx-1.00.a";
|
||||
reg = <0x77600000 0x1000>;
|
||||
clocks = <&clk 15>, <&audio_clock>;
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ Optional properties:
|
|||
Example:
|
||||
|
||||
&i2c {
|
||||
ak4613: ak4613@0x10 {
|
||||
ak4613: ak4613@10 {
|
||||
compatible = "asahi-kasei,ak4613";
|
||||
reg = <0x10>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ Optional properties:
|
|||
Example 1:
|
||||
|
||||
&i2c {
|
||||
ak4648: ak4648@0x12 {
|
||||
ak4648: ak4648@12 {
|
||||
compatible = "asahi-kasei,ak4642";
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -73,7 +73,7 @@ Example:
|
|||
compatible = "dlg,da7218";
|
||||
reg = <0x1a>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
|
||||
VDD-supply = <®_audio>;
|
||||
|
|
|
|||
|
|
@ -77,7 +77,7 @@ Example:
|
|||
reg = <0x1a>;
|
||||
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
VDD-supply = <®_audio>;
|
||||
VDDMIC-supply = <®_audio>;
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ Required properties:
|
|||
Example:
|
||||
|
||||
&i2c {
|
||||
max98371: max98371@0x31 {
|
||||
max98371: max98371@31 {
|
||||
compatible = "maxim,max98371";
|
||||
reg = <0x31>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ Required properties:
|
|||
Example:
|
||||
|
||||
&i2c {
|
||||
max9867: max9867@0x18 {
|
||||
max9867: max9867@18 {
|
||||
compatible = "maxim,max9867";
|
||||
reg = <0x18>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ Required properties:
|
|||
|
||||
Example:
|
||||
|
||||
sh_fsi2: sh_fsi2@0xec230000 {
|
||||
sh_fsi2: sh_fsi2@ec230000 {
|
||||
compatible = "renesas,sh_fsi2";
|
||||
reg = <0xec230000 0x400>;
|
||||
interrupts = <0 146 0x4>;
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ Required properties on RK3288:
|
|||
|
||||
Example for the rk3188 SPDIF controller:
|
||||
|
||||
spdif: spdif@0x1011e000 {
|
||||
spdif: spdif@1011e000 {
|
||||
compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
|
||||
reg = <0x1011e000 0x2000>;
|
||||
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
sti_uni_player1: sti-uni-player@0x8D81000 {
|
||||
sti_uni_player1: sti-uni-player@8D81000 {
|
||||
compatible = "st,stih407-uni-player-hdmi";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
|
|
@ -63,7 +63,7 @@ Example:
|
|||
st,tdm-mode = <1>;
|
||||
};
|
||||
|
||||
sti_uni_player2: sti-uni-player@0x8D82000 {
|
||||
sti_uni_player2: sti-uni-player@8D82000 {
|
||||
compatible = "st,stih407-uni-player-pcm-out";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
|
|
@ -74,7 +74,7 @@ Example:
|
|||
dma-names = "tx";
|
||||
};
|
||||
|
||||
sti_uni_player3: sti-uni-player@0x8D85000 {
|
||||
sti_uni_player3: sti-uni-player@8D85000 {
|
||||
compatible = "st,stih407-uni-player-spdif";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
|
|
@ -85,7 +85,7 @@ Example:
|
|||
dma-names = "tx";
|
||||
};
|
||||
|
||||
sti_uni_reader1: sti-uni-reader@0x8D84000 {
|
||||
sti_uni_reader1: sti-uni-reader@8D84000 {
|
||||
compatible = "st,stih407-uni-reader-hdmi";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
|
|
|
|||
|
|
@ -19,7 +19,7 @@ Recommended properties :
|
|||
|
||||
Example:
|
||||
|
||||
spi1: spi@0x4000c400 { /* USART1 */
|
||||
spi1: spi@4000c400 { /* USART1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "energymicro,efm32-spi";
|
||||
|
|
|
|||
|
|
@ -12,24 +12,30 @@ Required properties:
|
|||
- "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
|
||||
- reg : Offset and length of the register set for the device
|
||||
- interrupts : Should contain CSPI/eCSPI interrupt
|
||||
- cs-gpios : Specifies the gpio pins to be used for chipselects.
|
||||
- clocks : Clock specifiers for both ipg and per clocks.
|
||||
- clock-names : Clock names should include both "ipg" and "per"
|
||||
See the clock consumer binding,
|
||||
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
|
||||
Documentation/devicetree/bindings/dma/dma.txt
|
||||
- dma-names: DMA request names should include "tx" and "rx" if present.
|
||||
|
||||
Obsolete properties:
|
||||
- fsl,spi-num-chipselects : Contains the number of the chipselect
|
||||
Recommended properties:
|
||||
- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip
|
||||
select lines can be used, they appear to always generate a pulse between each
|
||||
word of a transfer. Most use cases will require GPIO based chip selects to
|
||||
generate a valid transaction.
|
||||
|
||||
Optional properties:
|
||||
- num-cs : Number of total chip selects, see spi-bus.txt.
|
||||
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
|
||||
Documentation/devicetree/bindings/dma/dma.txt.
|
||||
- dma-names: DMA request names, if present, should include "tx" and "rx".
|
||||
- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
|
||||
controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
|
||||
the SPI_READY mode-flag needs to be set too.
|
||||
Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
|
||||
|
||||
Obsolete properties:
|
||||
- fsl,spi-num-chipselects : Contains the number of the chipselect
|
||||
|
||||
Example:
|
||||
|
||||
ecspi@70010000 {
|
||||
|
|
|
|||
|
|
@ -239,7 +239,7 @@ cpus {
|
|||
* A simple fan controller which supports 10 speeds of operation
|
||||
* (represented as 0-9).
|
||||
*/
|
||||
fan0: fan@0x48 {
|
||||
fan0: fan@48 {
|
||||
...
|
||||
cooling-min-level = <0>;
|
||||
cooling-max-level = <9>;
|
||||
|
|
@ -252,7 +252,7 @@ ocp {
|
|||
/*
|
||||
* A simple IC with a single bandgap temperature sensor.
|
||||
*/
|
||||
bandgap0: bandgap@0x0000ED00 {
|
||||
bandgap0: bandgap@0000ED00 {
|
||||
...
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
|
@ -330,7 +330,7 @@ ocp {
|
|||
/*
|
||||
* A simple IC with several bandgap temperature sensors.
|
||||
*/
|
||||
bandgap0: bandgap@0x0000ED00 {
|
||||
bandgap0: bandgap@0000ED00 {
|
||||
...
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
|
@ -447,7 +447,7 @@ one thermal zone.
|
|||
/*
|
||||
* A simple IC with a single temperature sensor.
|
||||
*/
|
||||
adc: sensor@0x49 {
|
||||
adc: sensor@49 {
|
||||
...
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
|
@ -458,7 +458,7 @@ ocp {
|
|||
/*
|
||||
* A simple IC with a single bandgap temperature sensor.
|
||||
*/
|
||||
bandgap0: bandgap@0x0000ED00 {
|
||||
bandgap0: bandgap@0000ED00 {
|
||||
...
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
|
@ -516,7 +516,7 @@ with many sensors and many cooling devices.
|
|||
/*
|
||||
* An IC with several temperature sensor.
|
||||
*/
|
||||
adc_dummy: sensor@0x50 {
|
||||
adc_dummy: sensor@50 {
|
||||
...
|
||||
#thermal-sensor-cells = <1>; /* sensor internal ID */
|
||||
};
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@ Optional properties:
|
|||
|
||||
Example:
|
||||
|
||||
ufsphy1: ufsphy@0xfc597000 {
|
||||
ufsphy1: ufsphy@fc597000 {
|
||||
compatible = "qcom,ufs-phy-qmp-20nm";
|
||||
reg = <0xfc597000 0x800>;
|
||||
reg-names = "phy_mem";
|
||||
|
|
@ -53,7 +53,7 @@ Example:
|
|||
<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
|
||||
};
|
||||
|
||||
ufshc@0xfc598000 {
|
||||
ufshc@fc598000 {
|
||||
...
|
||||
phys = <&ufsphy1>;
|
||||
phy-names = "ufsphy";
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply
|
|||
regulators or clocks are always on.
|
||||
|
||||
Example:
|
||||
ufshc@0xfc598000 {
|
||||
ufshc@fc598000 {
|
||||
compatible = "jedec,ufs-1.1";
|
||||
reg = <0xfc598000 0x800>;
|
||||
interrupts = <0 28 0>;
|
||||
|
|
|
|||
|
|
@ -95,6 +95,7 @@ usb: usb@47400000 {
|
|||
reg = <0x47401300 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb0: usb@47401000 {
|
||||
|
|
@ -141,6 +142,7 @@ usb: usb@47400000 {
|
|||
reg = <0x47401b00 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb1: usb@47401800 {
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
|
|||
|
||||
Example:
|
||||
|
||||
ehci1: usb@0xfe203e00 {
|
||||
ehci1: usb@fe203e00 {
|
||||
compatible = "st,st-ehci-300x";
|
||||
reg = <0xfe203e00 0x100>;
|
||||
interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
|
|||
|
||||
Example:
|
||||
|
||||
ohci0: usb@0xfe1ffc00 {
|
||||
ohci0: usb@fe1ffc00 {
|
||||
compatible = "st,st-ohci-300x";
|
||||
reg = <0xfe1ffc00 0x100>;
|
||||
interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ reg: Register address and length for watchdog registers
|
|||
|
||||
Example:
|
||||
|
||||
watchdog: jz4740-watchdog@0x10002000 {
|
||||
watchdog: jz4740-watchdog@10002000 {
|
||||
compatible = "ingenic,jz4740-watchdog";
|
||||
reg = <0x10002000 0x100>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -185,7 +185,7 @@ The details of these operations are:
|
|||
void dma_async_issue_pending(struct dma_chan *chan);
|
||||
|
||||
Further APIs:
|
||||
------------
|
||||
-------------
|
||||
|
||||
1. Terminate APIs
|
||||
|
||||
|
|
|
|||
|
|
@ -25,9 +25,6 @@ PCI Support Library
|
|||
.. kernel-doc:: drivers/pci/irq.c
|
||||
:export:
|
||||
|
||||
.. kernel-doc:: drivers/pci/htirq.c
|
||||
:export:
|
||||
|
||||
.. kernel-doc:: drivers/pci/probe.c
|
||||
:export:
|
||||
|
||||
|
|
|
|||
|
|
@ -25,8 +25,8 @@ available from the following download page. At least "mkfs.nilfs2",
|
|||
cleaner or garbage collector) are required. Details on the tools are
|
||||
described in the man pages included in the package.
|
||||
|
||||
Project web page: http://nilfs.sourceforge.net/
|
||||
Download page: http://nilfs.sourceforge.net/en/download.html
|
||||
Project web page: https://nilfs.sourceforge.io/
|
||||
Download page: https://nilfs.sourceforge.io/en/download.html
|
||||
List info: http://vger.kernel.org/vger-lists.html#linux-nilfs
|
||||
|
||||
Caveats
|
||||
|
|
|
|||
|
|
@ -156,6 +156,40 @@ handle it in two different ways:
|
|||
root of the overlay. Finally the directory is moved to the new
|
||||
location.
|
||||
|
||||
There are several ways to tune the "redirect_dir" feature.
|
||||
|
||||
Kernel config options:
|
||||
|
||||
- OVERLAY_FS_REDIRECT_DIR:
|
||||
If this is enabled, then redirect_dir is turned on by default.
|
||||
- OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW:
|
||||
If this is enabled, then redirects are always followed by default. Enabling
|
||||
this results in a less secure configuration. Enable this option only when
|
||||
worried about backward compatibility with kernels that have the redirect_dir
|
||||
feature and follow redirects even if turned off.
|
||||
|
||||
Module options (can also be changed through /sys/module/overlay/parameters/*):
|
||||
|
||||
- "redirect_dir=BOOL":
|
||||
See OVERLAY_FS_REDIRECT_DIR kernel config option above.
|
||||
- "redirect_always_follow=BOOL":
|
||||
See OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW kernel config option above.
|
||||
- "redirect_max=NUM":
|
||||
The maximum number of bytes in an absolute redirect (default is 256).
|
||||
|
||||
Mount options:
|
||||
|
||||
- "redirect_dir=on":
|
||||
Redirects are enabled.
|
||||
- "redirect_dir=follow":
|
||||
Redirects are not created, but followed.
|
||||
- "redirect_dir=off":
|
||||
Redirects are not created and only followed if "redirect_always_follow"
|
||||
feature is enabled in the kernel/module config.
|
||||
- "redirect_dir=nofollow":
|
||||
Redirects are not created and not followed (equivalent to "redirect_dir=off"
|
||||
if "redirect_always_follow" feature is not enabled).
|
||||
|
||||
Non-directories
|
||||
---------------
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue