From ae45893f74c72e632cbad882509f12558db2e4f3 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Wed, 5 Sep 2018 17:31:37 +0900 Subject: [PATCH 1/5] ASoC: uniphier: change status to orphan Since I'm leaving from Socionext, I'll unable to access specification documents of this hardware (these are not public). So change the state to orphan until someone will maintain this driver. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Mark Brown --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index fc711d23dc83..5ee6b45248e5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13159,9 +13159,8 @@ F: drivers/i2c/busses/i2c-synquacer.c F: Documentation/devicetree/bindings/i2c/i2c-synquacer.txt SOCIONEXT UNIPHIER SOUND DRIVER -M: Katsuhiro Suzuki L: alsa-devel@alsa-project.org (moderated for non-subscribers) -S: Maintained +S: Orphan F: sound/soc/uniphier/ SOEKRIS NET48XX LED SUPPORT From 69235ccf491d2e26aefd465c0d3ccd1e3b2a9a9c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 6 Sep 2018 03:21:33 +0000 Subject: [PATCH 2/5] ASoC: rsnd: adg: care clock-frequency size ADG has buffer over flow bug if DT has more than 3 clock-frequency. This patch fixup this issue, and uses first 2 values. clock-frequency = ; /* this is OK */ clock-frequency = ; /* this is NG */ Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown --- sound/soc/sh/rcar/adg.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index 3a3064dda57f..051f96405346 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -462,6 +462,11 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, goto rsnd_adg_get_clkout_end; req_size = prop->length / sizeof(u32); + if (req_size > REQ_SIZE) { + dev_err(dev, + "too many clock-frequency, use top %d\n", REQ_SIZE); + req_size = REQ_SIZE; + } of_property_read_u32_array(np, "clock-frequency", req_rate, req_size); req_48kHz_rate = 0; From 6c92d5a2744e27619a8fcc9d74b91ee9f1cdebd1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 6 Sep 2018 03:21:47 +0000 Subject: [PATCH 3/5] ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER Current rsnd driver will fallback to PIO mode if it can't get DMA handler. But, DMA might return -EPROBE_DEFER when probe timing. This driver always fallback to PIO mode especially from commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because of this reason. The DMA driver will be probed later, but sound driver might be probed as PIO mode in such case. This patch fixup this issue. Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error message in such case. And it needs to call rsnd_adg_remove() individually if probe failed, because it registers clk which should be unregister. Maybe PIO fallback feature itself is not needed, but let's keep it so far. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/core.c | 10 +++++++++- sound/soc/sh/rcar/dma.c | 4 ++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index b35f5509cfe2..d23c2bbff0cf 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -478,7 +478,7 @@ static int rsnd_status_update(u32 *status, (func_call && (mod)->ops->fn) ? #fn : ""); \ if (func_call && (mod)->ops->fn) \ tmp = (mod)->ops->fn(mod, io, param); \ - if (tmp) \ + if (tmp && (tmp != -EPROBE_DEFER)) \ dev_err(dev, "%s[%d] : %s error %d\n", \ rsnd_mod_name(mod), rsnd_mod_id(mod), \ #fn, tmp); \ @@ -1561,6 +1561,14 @@ exit_snd_probe: rsnd_dai_call(remove, &rdai->capture, priv); } + /* + * adg is very special mod which can't use rsnd_dai_call(remove), + * and it registers ADG clock on probe. + * It should be unregister if probe failed. + * Mainly it is assuming -EPROBE_DEFER case + */ + rsnd_adg_remove(priv); + return ret; } diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c index fe63ef8600d0..d65ea7bc4dac 100644 --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -241,6 +241,10 @@ static int rsnd_dmaen_attach(struct rsnd_dai_stream *io, /* try to get DMAEngine channel */ chan = rsnd_dmaen_request_channel(io, mod_from, mod_to); if (IS_ERR_OR_NULL(chan)) { + /* Let's follow when -EPROBE_DEFER case */ + if (PTR_ERR(chan) == -EPROBE_DEFER) + return PTR_ERR(chan); + /* * DMA failed. try to PIO mode * see From 2a665dba016d5493c7d826fec82b0cb643b30d42 Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Mon, 10 Sep 2018 13:36:30 +0530 Subject: [PATCH 4/5] ASoC: AMD: Ensure reset bit is cleared before configuring HW register descriptions says: "DMA Channel Reset...Software must confirm that this bit is cleared before reprogramming any of the channel configuration registers." There could be cases where dma stop errored out leaving dma channel in reset state. We need to ensure that before the start of another dma, channel is out of the reset state. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index e359938e3d7e..77b265bd0505 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -184,6 +185,24 @@ static void config_dma_descriptor_in_sram(void __iomem *acp_mmio, acp_reg_write(descr_info->xfer_val, acp_mmio, mmACP_SRBM_Targ_Idx_Data); } +static void pre_config_reset(void __iomem *acp_mmio, u16 ch_num) +{ + u32 dma_ctrl; + int ret; + + /* clear the reset bit */ + dma_ctrl = acp_reg_read(acp_mmio, mmACP_DMA_CNTL_0 + ch_num); + dma_ctrl &= ~ACP_DMA_CNTL_0__DMAChRst_MASK; + acp_reg_write(dma_ctrl, acp_mmio, mmACP_DMA_CNTL_0 + ch_num); + /* check the reset bit before programming configuration registers */ + ret = readl_poll_timeout(acp_mmio + ((mmACP_DMA_CNTL_0 + ch_num) * 4), + dma_ctrl, + !(dma_ctrl & ACP_DMA_CNTL_0__DMAChRst_MASK), + 100, ACP_DMA_RESET_TIME); + if (ret < 0) + pr_err("Failed to clear reset of channel : %d\n", ch_num); +} + /* * Initialize the DMA descriptor information for transfer between * system memory <-> ACP SRAM @@ -236,6 +255,7 @@ static void set_acp_sysmem_dma_descriptors(void __iomem *acp_mmio, config_dma_descriptor_in_sram(acp_mmio, dma_dscr_idx, &dmadscr[i]); } + pre_config_reset(acp_mmio, ch); config_acp_dma_channel(acp_mmio, ch, dma_dscr_idx - 1, NUM_DSCRS_PER_CHANNEL, @@ -275,6 +295,7 @@ static void set_acp_to_i2s_dma_descriptors(void __iomem *acp_mmio, u32 size, config_dma_descriptor_in_sram(acp_mmio, dma_dscr_idx, &dmadscr[i]); } + pre_config_reset(acp_mmio, ch); /* Configure the DMA channel with the above descriptore */ config_acp_dma_channel(acp_mmio, ch, dma_dscr_idx - 1, NUM_DSCRS_PER_CHANNEL, From 90a3b7f8aba3011badacd6d8121e03aa24ac79d1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C3=A9bastien=20Szymanski?= Date: Thu, 6 Sep 2018 11:16:00 +0200 Subject: [PATCH 5/5] ASoC: cs4265: fix MMTLR Data switch control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0 and not at address 0x0 bit 1. Fix this. Signed-off-by: Sébastien Szymanski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs4265.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c index 275677de669f..407554175282 100644 --- a/sound/soc/codecs/cs4265.c +++ b/sound/soc/codecs/cs4265.c @@ -157,8 +157,8 @@ static const struct snd_kcontrol_new cs4265_snd_controls[] = { SOC_SINGLE("Validity Bit Control Switch", CS4265_SPDIF_CTL2, 3, 1, 0), SOC_ENUM("SPDIF Mono/Stereo", spdif_mono_stereo_enum), - SOC_SINGLE("MMTLR Data Switch", 0, - 1, 1, 0), + SOC_SINGLE("MMTLR Data Switch", CS4265_SPDIF_CTL2, + 0, 1, 0), SOC_ENUM("Mono Channel Select", spdif_mono_select_enum), SND_SOC_BYTES("C Data Buffer", CS4265_C_DATA_BUFF, 24), };