diff --git a/.gitignore b/.gitignore
index 3f8fb686b59c..53e53f2791f8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -30,3 +30,5 @@ include/linux/autoconf.h
include/linux/compile.h
include/linux/version.h
+# stgit generated dirs
+patches-*
diff --git a/CREDITS b/CREDITS
index 1f171f1033bd..af70678a0afd 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2813,6 +2813,8 @@ E: luca.risolia@studio.unibo.it
P: 1024D/FCE635A4 88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4
D: V4L driver for W996[87]CF JPEG USB Dual Mode Camera Chips
D: V4L2 driver for SN9C10x PC Camera Controllers
+D: V4L2 driver for ET61X151 and ET61X251 PC Camera Controllers
+D: V4L2 driver for ZC0301 Image Processor and Control Chip
S: Via Liberta' 41/A
S: Osio Sotto, 24046, Bergamo
S: Italy
diff --git a/Documentation/Changes b/Documentation/Changes
index fe5ae0f55020..b02f476c2973 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -15,24 +15,6 @@ and therefore owes credit to the same people as that file (Jared Mauch,
Axel Boldt, Alessandro Sigala, and countless other users all over the
'net).
-The latest revision of this document, in various formats, can always
-be found at , yavlyaushisya
-russkim perevodom dannogo documenta.
-
-Visite .
-
-Chris Ricker (kaboom@gatech.edu or chris.ricker@genetics.utah.edu).
-
Current Minimal Requirements
============================
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index 57a314b14cf8..ad6e0ba7b38c 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -69,10 +69,11 @@ Unregisters new callback with connector core.
struct cb_id *id - unique connector's user identifier.
-void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
+int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
Sends message to the specified groups. It can be safely called from
-any context, but may silently fail under strong memory pressure.
+softirq context, but may silently fail under strong memory pressure.
+If there are no listeners for given group -ESRCH can be returned.
struct cn_msg * - message header(with attached data).
u32 __group - destination group.
diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
index 068070ff13cd..8bab8461a4af 100644
--- a/Documentation/dvb/avermedia.txt
+++ b/Documentation/dvb/avermedia.txt
@@ -1,4 +1,3 @@
-
HOWTO: Get An Avermedia DVB-T working under Linux
______________________________________________
@@ -137,11 +136,8 @@ Getting the card going
To power up the card, load the following modules in the
following order:
- * insmod dvb-core.o
- * modprobe bttv.o
- * insmod bt878.o
- * insmod dvb-bt8xx.o
- * insmod sp887x.o
+ * modprobe bttv (normally loaded automatically)
+ * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
Insertion of these modules into the running kernel will
activate the appropriate DVB device nodes. It is then possible
@@ -302,4 +298,4 @@ Further Update
Many thanks to Nigel Pearson for the updates to this document
since the recent revision of the driver.
- January 29th 2004
+ February 14th 2006
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index 52ed462061df..4e7614e606c5 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -1,118 +1,78 @@
-How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working
-==========================================================================
+How to get the bt8xx cards working
+==================================
-This class of cards has a bt878a as the PCI interface, and
-require the bttv driver.
+1) General information
+======================
-Please pay close attention to the warning about the bttv module
-options below for the DST card.
+This class of cards has a bt878a as the PCI interface, and require the bttv driver
+for accessing the i2c bus and the gpio pins of the bt8xx chipset.
+Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
-1) General informations
-=======================
-
-These drivers require the bttv driver to provide the means to access
-the i2c bus and the gpio pins of the bt8xx chipset.
-
-Because of this, you need to enable
-"Device drivers" => "Multimedia devices"
- => "Video For Linux" => "BT848 Video For Linux"
-
-Furthermore you need to enable
-"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
- => "DVB for Linux" "DVB Core Support" "BT8xx based PCI cards"
+Compiling kernel please enable:
+a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux"
+b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
2) Loading Modules
==================
-In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us, plus the common dvb-bt8xx device driver.
-The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst),
-FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded
-automatically by the dvb-bt8xx device driver.
+In default cases bttv is loaded automatically.
+To load the backend either place dvb-bt8xx in etc/modules, or apply manually:
-3a) Nebula / Pinnacle PCTV / FusionHDTV Lite
----------------------------------------------
+ $ modprobe dvb-bt8xx
- $ modprobe bttv (normally bttv is being loaded automatically by kmod)
- $ modprobe dvb-bt8xx
+All frontends will be loaded automatically.
+People running udev please see Documentation/dvb/udev.txt.
-(or just place dvb-bt8xx in /etc/modules for automatic loading)
+In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
+2a) Running TwinHan and Clones
+------------------------------
-3b) TwinHan and Clones
+ $ modprobe bttv card=113
+ $ modprobe dvb-bt8xx
+ $ modprobe dst
+
+Useful parameters for verbosity level and debugging the dst module:
+
+verbose=0: messages are disabled
+ 1: only error messages are displayed
+ 2: notifications are displayed
+ 3: other useful messages are displayed
+ 4: debug setting
+dst_addons=0: card is a free to air (FTA) card only
+ 0x20: card has a conditional access slot for scrambled channels
+
+The autodetected values are determined by the cards' "response string".
+In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
+For bug reports please send in a complete log with verbose=4 activated.
+Please also see Documentation/dvb/ci.txt.
+
+2b) Running multiple cards
--------------------------
- $ modprobe bttv card=0x71
- $ modprobe dvb-bt8xx
- $ modprobe dst
+Examples of card ID's:
-The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which is necessary for TwinHan cards. Omission of this parameter might result
-in a system lockup.
-
-If you're having an older card (blue color PCB) and card=0x71 locks up
-your machine, try using 0x68, too. If that does not work, ask on the
-mailing list.
-
-The DST module takes a couple of useful parameters.
-
-verbose takes values 0 to 4. These values control the verbosity level,
-and can be used to debug also.
-
-verbose=0 means complete disabling of messages
- 1 only error messages are displayed
- 2 notifications are also displayed
- 3 informational messages are also displayed
- 4 debug setting
-
-dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
-0x20 means it has a Conditional Access slot.
-
-The autodetected values are determined by the cards 'response string'
-which you can see in your logs e.g.
-
-dst_get_device_id: Recognise [DSTMCI]
-
-If you need to sent in bug reports on the dst, please do send in a complete
-log with the verbose=4 module parameter. For general usage, the default setting
-of verbose=1 is ideal.
-
-
-4) Multiple cards
---------------------------
-
-If you happen to be running multiple cards, it would be advisable to load
-the bttv module with the card id. This would help to solve any module loading
-problems that you might face.
-
-For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite
-
- $ modprobe bttv card=0x71 card=0x87
-
-Here the order of the card id is important and should be the same as that of the
-physical order of the cards. Here card=0x71 represents the Twinhan and clones
-and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be
-specified in decimal, rather than hex:
+Pinnacle PCTV Sat: 94
+Nebula Electronics Digi TV: 104
+pcHDTV HD-2000 TV: 112
+Twinhan DST and clones: 113
+Avermedia AverTV DVB-T 771: 123
+Avermedia AverTV DVB-T 761: 124
+DViCO FusionHDTV DVB-T Lite: 128
+DViCO FusionHDTV 5 Lite: 135
+Notice: The order of the card ID should be uprising:
+Example:
$ modprobe bttv card=113 card=135
+ $ modprobe dvb-bt8xx
-Some examples of card-id's
+For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
+In case of further problems send questions to the mailing list: www.linuxdvb.org.
-Pinnacle Sat 0x5e (94)
-Nebula Digi TV 0x68 (104)
-PC HDTV 0x70 (112)
-Twinhan 0x71 (113)
-FusionHDTV DVB-T Lite 0x80 (128)
-FusionHDTV5 Lite 0x87 (135)
-
-For a full list of card-id's, see the V4L Documentation within the kernel
-source: linux/Documentation/video4linux/CARDLIST.bttv
-
-If you have problems with this please do ask on the mailing list.
-
---
Authors: Richard Walker,
Jamie Honan,
Michael Hunold,
Manu Abraham,
+ Uwe Bugla,
Michael Krufky
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 75c28a174092..bb55f49f2745 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -21,8 +21,9 @@
use File::Temp qw/ tempdir /;
use IO::Handle;
-@components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
- "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
+@components = ( "sp8870", "sp887x", "tda10045", "tda10046",
+ "tda10046lifeview", "av7110", "dec2000t", "dec2540t",
+ "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird");
# Check args
@@ -126,6 +127,24 @@ sub tda10046 {
$outfile;
}
+sub tda10046lifeview {
+ my $sourcefile = "Drv_2.11.02.zip";
+ my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+ my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
+ my $outfile = "dvb-fe-tda10046.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ extract("$tmpdir/LVHybrid.sys", 0x8b088, 24602, "$tmpdir/fwtmp");
+ verify("$tmpdir/fwtmp", $hash);
+ copy("$tmpdir/fwtmp", $outfile);
+
+ $outfile;
+}
+
sub av7110 {
my $sourcefile = "dvb-ttpci-01.fw-261d";
my $url = "http://www.linuxtv.org/downloads/firmware/$sourcefile";
diff --git a/Documentation/dvb/readme.txt b/Documentation/dvb/readme.txt
index f5c50b22de3b..0b0380c91990 100644
--- a/Documentation/dvb/readme.txt
+++ b/Documentation/dvb/readme.txt
@@ -20,11 +20,23 @@ http://linuxtv.org/downloads/
What's inside this directory:
+"avermedia.txt"
+contains detailed information about the
+Avermedia DVB-T cards. See also "bt8xx.txt".
+
+"bt8xx.txt"
+contains detailed information about the
+various bt8xx based "budget" DVB cards.
+
"cards.txt"
contains a list of supported hardware.
+"ci.txt"
+contains detailed information about the
+CI module as part from TwinHan cards and Clones.
+
"contributors.txt"
-is the who-is-who of DVB development
+is the who-is-who of DVB development.
"faq.txt"
contains frequently asked questions and their answers.
@@ -34,19 +46,17 @@ script to download and extract firmware for those devices
that require it.
"ttusb-dec.txt"
-contains detailed informations about the
+contains detailed information about the
TT DEC2000/DEC3000 USB DVB hardware.
-"bt8xx.txt"
-contains detailed installation instructions for the
-various bt8xx based "budget" DVB cards
-(Nebula, Pinnacle PCTV, Twinhan DST)
-
-"README.dibusb"
-contains detailed information about adapters
-based on DiBcom reference design.
-
"udev.txt"
how to get DVB and udev up and running.
+"README.dvb-usb"
+contains detailed information about the DVB USB cards.
+
+"README.flexcop"
+contains detailed information about the
+Technisat- and Flexcop B2C2 drivers.
+
Good luck and have fun!
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 28a31c5e2289..afeaf6218ea2 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -196,3 +196,21 @@ Why: Board specific code doesn't build anymore since ~2.6.0 and no
users have complained indicating there is no more need for these
boards. This should really be considered a last call.
Who: Ralf Baechle
+
+---------------------------
+
+What: USB driver API moves to EXPORT_SYMBOL_GPL
+When: Febuary 2008
+Files: include/linux/usb.h, drivers/usb/core/driver.c
+Why: The USB subsystem has changed a lot over time, and it has been
+ possible to create userspace USB drivers using usbfs/libusb/gadgetfs
+ that operate as fast as the USB bus allows. Because of this, the USB
+ subsystem will not be allowing closed source kernel drivers to
+ register with it, after this grace period is over. If anyone needs
+ any help in converting their closed source drivers over to use the
+ userspace filesystems, please contact the
+ linux-usb-devel@lists.sourceforge.net mailing list, and the developers
+ there will be glad to help you out.
+Who: Greg Kroah-Hartman
+
+---------------------------
diff --git a/Documentation/networking/e100.txt b/Documentation/networking/e100.txt
index 4ef9f7cd5dc3..944aa55e79f8 100644
--- a/Documentation/networking/e100.txt
+++ b/Documentation/networking/e100.txt
@@ -1,16 +1,17 @@
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
==============================================================
-November 17, 2004
-
+November 15, 2005
Contents
========
- In This Release
- Identifying Your Adapter
+- Building and Installation
- Driver Configuration Parameters
- Additional Configurations
+- Known Issues
- Support
@@ -18,18 +19,30 @@ In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
-Adapters, version 3.3.x. This driver supports 2.4.x and 2.6.x kernels.
+Adapters. This driver includes support for Itanium(R)2-based systems.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel PRO/100 adapter.
+
+The following features are now available in supported kernels:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
Identifying Your Adapter
========================
-For more information on how to identify your adapter, go to the Adapter &
+For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
-For the latest Intel network drivers for Linux, refer to the following
-website. In the search field, enter your adapter name or type, or use the
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://downloadfinder.intel.com/scripts-df/support_intel.asp
@@ -40,73 +53,75 @@ Driver Configuration Parameters
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
-Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
- structure that describes a receive buffer and its attributes to the network
- controller. The data in the descriptor is used by the controller to write
- data from the controller to host memory. In the 3.0.x driver the valid
- range for this parameter is 64-256. The default value is 64. This parameter
- can be changed using the command
-
+Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
+ structure that describes a receive buffer and its attributes to the network
+ controller. The data in the descriptor is used by the controller to write
+ data from the controller to host memory. In the 3.x.x driver the valid range
+ for this parameter is 64-256. The default value is 64. This parameter can be
+ changed using the command:
+
ethtool -G eth? rx n, where n is the number of desired rx descriptors.
-Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a
- data structure that describes a transmit buffer and its attributes to the
- network controller. The data in the descriptor is used by the controller to
- read data from the host memory to the controller. In the 3.0.x driver the
- valid range for this parameter is 64-256. The default value is 64. This
- parameter can be changed using the command
+Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
+ structure that describes a transmit buffer and its attributes to the network
+ controller. The data in the descriptor is used by the controller to read
+ data from the host memory to the controller. In the 3.x.x driver the valid
+ range for this parameter is 64-256. The default value is 64. This parameter
+ can be changed using the command:
ethtool -G eth? tx n, where n is the number of desired tx descriptors.
-Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
- default. Ethtool can be used as follows to force speed/duplex.
+Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
+ default. Ethtool can be used as follows to force speed/duplex.
ethtool -s eth? autoneg off speed {10|100} duplex {full|half}
NOTE: setting the speed/duplex to incorrect values will cause the link to
fail.
-Event Log Message Level: The driver uses the message level flag to log events
- to syslog. The message level can be set at driver load time. It can also be
- set using the command
+Event Log Message Level: The driver uses the message level flag to log events
+ to syslog. The message level can be set at driver load time. It can also be
+ set using the command:
ethtool -s eth? msglvl n
+
Additional Configurations
=========================
Configuring the Driver on Different Distributions
-------------------------------------------------
- Configuring a network driver to load properly when the system is started is
- distribution dependent. Typically, the configuration process involves adding
- an alias line to /etc/modules.conf as well as editing other system startup
- scripts and/or configuration files. Many popular Linux distributions ship
- with tools to make these changes for you. To learn the proper way to
- configure a network device for your system, refer to your distribution
- documentation. If during this process you are asked for the driver or module
- name, the name for the Linux Base Driver for the Intel PRO/100 Family of
- Adapters is e100.
+ Configuring a network driver to load properly when the system is started is
+ distribution dependent. Typically, the configuration process involves adding
+ an alias line to /etc/modules.conf or /etc/modprobe.conf as well as editing
+ other system startup scripts and/or configuration files. Many popular Linux
+ distributions ship with tools to make these changes for you. To learn the
+ proper way to configure a network device for your system, refer to your
+ distribution documentation. If during this process you are asked for the
+ driver or module name, the name for the Linux Base Driver for the Intel
+ PRO/100 Family of Adapters is e100.
- As an example, if you install the e100 driver for two PRO/100 adapters
- (eth0 and eth1), add the following to modules.conf:
+ As an example, if you install the e100 driver for two PRO/100 adapters
+ (eth0 and eth1), add the following to modules.conf or modprobe.conf:
alias eth0 e100
alias eth1 e100
Viewing Link Messages
---------------------
- In order to see link messages and other Intel driver information on your
- console, you must set the dmesg level up to six. This can be done by
- entering the following on the command line before loading the e100 driver:
+ In order to see link messages and other Intel driver information on your
+ console, you must set the dmesg level up to six. This can be done by
+ entering the following on the command line before loading the e100 driver:
dmesg -n 8
- If you wish to see all messages issued by the driver, including debug
+ If you wish to see all messages issued by the driver, including debug
messages, set the dmesg level to eight.
NOTE: This setting is not saved across reboots.
+
Ethtool
-------
@@ -114,29 +129,27 @@ Additional Configurations
diagnostics, as well as displaying statistical information. Ethtool
version 1.6 or later is required for this functionality.
- The latest release of ethtool can be found at:
- http://sf.net/projects/gkernel.
+ The latest release of ethtool can be found from
+ http://sourceforge.net/projects/gkernel.
- NOTE: This driver uses mii support from the kernel. As a result, when
- there is no link, ethtool will report speed/duplex to be 10/half.
+ NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
+ for a more complete ethtool feature set can be enabled by upgrading
+ ethtool to ethtool-1.8.1.
- NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
- for a more complete ethtool feature set can be enabled by upgrading
- ethtool to ethtool-1.8.1.
Enabling Wake on LAN* (WoL)
---------------------------
- WoL is provided through the Ethtool* utility. Ethtool is included with Red
- Hat* 8.0. For other Linux distributions, download and install Ethtool from
- the following website: http://sourceforge.net/projects/gkernel.
+ WoL is provided through the Ethtool* utility. Ethtool is included with Red
+ Hat* 8.0. For other Linux distributions, download and install Ethtool from
+ the following website: http://sourceforge.net/projects/gkernel.
- For instructions on enabling WoL with Ethtool, refer to the Ethtool man
- page.
+ For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
WoL will be enabled on the system during the next shut down or reboot. For
- this driver version, in order to enable WoL, the e100 driver must be
+ this driver version, in order to enable WoL, the e100 driver must be
loaded when shutting down or rebooting the system.
+
NAPI
----
@@ -144,6 +157,25 @@ Additional Configurations
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
+ Multiple Interfaces on Same Ethernet Broadcast Network
+ ------------------------------------------------------
+
+ Due to the default ARP behavior on Linux, it is not possible to have
+ one system on two IP networks in the same Ethernet broadcast domain
+ (non-partitioned switch) behave as expected. All Ethernet interfaces
+ will respond to IP traffic for any IP address assigned to the system.
+ This results in unbalanced receive traffic.
+
+ If you have multiple interfaces in a server, either turn on ARP
+ filtering by
+
+ (1) entering: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+ (this only works if your kernel's version is higher than 2.4.5), or
+
+ (2) installing the interfaces in separate broadcast domains (either
+ in different switches or in a switch partitioned to VLANs).
+
+
Support
=======
@@ -151,20 +183,24 @@ For general information, go to the Intel support website at:
http://support.intel.com
+ or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to
-the issue to linux.nics@intel.com.
+kernel with a supported adapter, email the specific information related to the
+issue to e1000-devel@lists.sourceforge.net.
License
=======
-This software program is released under the terms of a license agreement
-between you ('Licensee') and Intel. Do not use or load this software or any
-associated materials (collectively, the 'Software') until you have carefully
-read the full terms and conditions of the LICENSE located in this software
-package. By loading or using the Software, you agree to the terms of this
-Agreement. If you do not agree with the terms of this Agreement, do not
-install or use the Software.
+This software program is released under the terms of a license agreement
+between you ('Licensee') and Intel. Do not use or load this software or any
+associated materials (collectively, the 'Software') until you have carefully
+read the full terms and conditions of the file COPYING located in this software
+package. By loading or using the Software, you agree to the terms of this
+Agreement. If you do not agree with the terms of this Agreement, do not install
+or use the Software.
* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 2ebd4058d46d..71fe15af356c 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -1,7 +1,7 @@
Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
===============================================================
-November 17, 2004
+November 15, 2005
Contents
@@ -20,254 +20,316 @@ In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters, version 5.x.x.
+of Adapters. This driver includes support for Itanium(R)2-based systems.
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel PRO/1000 adapter. All hardware requirements listed
apply to use with Linux.
-Native VLANs are now available with supported kernels.
+The following features are now available in supported kernels:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
+The driver information previously displayed in the /proc filesystem is not
+supported in this release. Alternatively, you can use ethtool (version 1.6
+or later), lspci, and ifconfig to obtain the same information.
+
+Instructions on updating ethtool can be found in the section "Additional
+Configurations" later in this document.
+
Identifying Your Adapter
========================
-For more information on how to identify your adapter, go to the Adapter &
+For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
-For the latest Intel network drivers for Linux, refer to the following
-website. In the search field, enter your adapter name or type, or use the
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://downloadfinder.intel.com/scripts-df/support_intel.asp
-Command Line Parameters
-=======================
-If the driver is built as a module, the following optional parameters are
-used by entering them on the command line with the modprobe or insmod command
-using this syntax:
+Command Line Parameters =======================
+
+If the driver is built as a module, the following optional parameters
+are used by entering them on the command line with the modprobe or insmod
+command using this syntax:
modprobe e1000 [=,,...]
- insmod e1000 [=,,...]
+ insmod e1000 [=,,...]
For example, with two PRO/1000 PCI adapters, entering:
insmod e1000 TxDescriptors=80,128
-loads the e1000 driver with 80 TX descriptors for the first adapter and 128 TX
-descriptors for the second adapter.
+loads the e1000 driver with 80 TX descriptors for the first adapter and 128
+TX descriptors for the second adapter.
The default value for each parameter is generally the recommended setting,
-unless otherwise noted. Also, if the driver is statically built into the
-kernel, the driver is loaded with the default values for all the parameters.
-Ethtool can be used to change some of the parameters at runtime.
+unless otherwise noted.
- NOTES: For more information about the AutoNeg, Duplex, and Speed
- parameters, see the "Speed and Duplex Configuration" section in
- this document.
+NOTES: For more information about the AutoNeg, Duplex, and Speed
+ parameters, see the "Speed and Duplex Configuration" section in
+ this document.
- For more information about the InterruptThrottleRate, RxIntDelay,
- TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay parameters, see the
- application note at:
- http://www.intel.com/design/network/applnots/ap450.htm
+ For more information about the InterruptThrottleRate,
+ RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+ parameters, see the application note at:
+ http://www.intel.com/design/network/applnots/ap450.htm
- A descriptor describes a data buffer and attributes related to the
- data buffer. This information is accessed by the hardware.
+ A descriptor describes a data buffer and attributes related to
+ the data buffer. This information is accessed by the hardware.
-AutoNeg (adapters using copper connections only)
-Valid Range: 0x01-0x0F, 0x20-0x2F
+
+AutoNeg
+-------
+(Supported only on adapters with copper connections)
+Valid Range: 0x01-0x0F, 0x20-0x2F
Default Value: 0x2F
- This parameter is a bit mask that specifies which speed and duplex
- settings the board advertises. When this parameter is used, the Speed and
- Duplex parameters must not be specified.
- NOTE: Refer to the Speed and Duplex section of this readme for more
- information on the AutoNeg parameter.
-Duplex (adapters using copper connections only)
-Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
+This parameter is a bit mask that specifies which speed and duplex
+settings the board advertises. When this parameter is used, the Speed
+and Duplex parameters must not be specified.
+
+NOTE: Refer to the Speed and Duplex section of this readme for more
+ information on the AutoNeg parameter.
+
+
+Duplex
+------
+(Supported only on adapters with copper connections)
+Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
Default Value: 0
- Defines the direction in which data is allowed to flow. Can be either one
- or two-directional. If both Duplex and the link partner are set to auto-
- negotiate, the board auto-detects the correct duplex. If the link partner
- is forced (either full or half), Duplex defaults to half-duplex.
+
+Defines the direction in which data is allowed to flow. Can be either
+one or two-directional. If both Duplex and the link partner are set to
+auto-negotiate, the board auto-detects the correct duplex. If the link
+partner is forced (either full or half), Duplex defaults to half-duplex.
+
FlowControl
-Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
-Default: Read flow control settings from the EEPROM
- This parameter controls the automatic generation(Tx) and response(Rx) to
- Ethernet PAUSE frames.
+----------
+Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
+Default Value: Reads flow control settings from the EEPROM
+
+This parameter controls the automatic generation(Tx) and response(Rx)
+to Ethernet PAUSE frames.
+
InterruptThrottleRate
-Valid Range: 100-100000 (0=off, 1=dynamic)
+---------------------
+(not supported on Intel 82542, 82543 or 82544-based adapters)
+Valid Range: 100-100000 (0=off, 1=dynamic)
Default Value: 8000
- This value represents the maximum number of interrupts per second the
- controller generates. InterruptThrottleRate is another setting used in
- interrupt moderation. Dynamic mode uses a heuristic algorithm to adjust
- InterruptThrottleRate based on the current traffic load.
-Un-supported Adapters: InterruptThrottleRate is NOT supported by 82542, 82543
- or 82544-based adapters.
- NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
- RxAbsIntDelay parameters. In other words, minimizing the receive
- and/or transmit absolute delays does not force the controller to
- generate more interrupts than what the Interrupt Throttle Rate
- allows.
- CAUTION: If you are using the Intel PRO/1000 CT Network Connection
- (controller 82547), setting InterruptThrottleRate to a value
- greater than 75,000, may hang (stop transmitting) adapters under
- certain network conditions. If this occurs a NETDEV WATCHDOG
- message is logged in the system event log. In addition, the
- controller is automatically reset, restoring the network
- connection. To eliminate the potential for the hang, ensure
- that InterruptThrottleRate is set no greater than 75,000 and is
- not set to 0.
- NOTE: When e1000 is loaded with default settings and multiple adapters are
- in use simultaneously, the CPU utilization may increase non-linearly.
- In order to limit the CPU utilization without impacting the overall
- throughput, we recommend that you load the driver as follows:
+This value represents the maximum number of interrupts per second the
+controller generates. InterruptThrottleRate is another setting used in
+interrupt moderation. Dynamic mode uses a heuristic algorithm to adjust
+InterruptThrottleRate based on the current traffic load.
- insmod e1000.o InterruptThrottleRate=3000,3000,3000
+NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+ RxAbsIntDelay parameters. In other words, minimizing the receive
+ and/or transmit absolute delays does not force the controller to
+ generate more interrupts than what the Interrupt Throttle Rate
+ allows.
+
+CAUTION: If you are using the Intel PRO/1000 CT Network Connection
+ (controller 82547), setting InterruptThrottleRate to a value
+ greater than 75,000, may hang (stop transmitting) adapters
+ under certain network conditions. If this occurs a NETDEV
+ WATCHDOG message is logged in the system event log. In
+ addition, the controller is automatically reset, restoring
+ the network connection. To eliminate the potential for the
+ hang, ensure that InterruptThrottleRate is set no greater
+ than 75,000 and is not set to 0.
+
+NOTE: When e1000 is loaded with default settings and multiple adapters
+ are in use simultaneously, the CPU utilization may increase non-
+ linearly. In order to limit the CPU utilization without impacting
+ the overall throughput, we recommend that you load the driver as
+ follows:
+
+ insmod e1000.o InterruptThrottleRate=3000,3000,3000
+
+ This sets the InterruptThrottleRate to 3000 interrupts/sec for
+ the first, second, and third instances of the driver. The range
+ of 2000 to 3000 interrupts per second works on a majority of
+ systems and is a good starting point, but the optimal value will
+ be platform-specific. If CPU utilization is not a concern, use
+ RX_POLLING (NAPI) and default driver settings.
- This sets the InterruptThrottleRate to 3000 interrupts/sec for the
- first, second, and third instances of the driver. The range of 2000 to
- 3000 interrupts per second works on a majority of systems and is a
- good starting point, but the optimal value will be platform-specific.
- If CPU utilization is not a concern, use RX_POLLING (NAPI) and default
- driver settings.
RxDescriptors
-Valid Range: 80-256 for 82542 and 82543-based adapters
- 80-4096 for all other supported adapters
+-------------
+Valid Range: 80-256 for 82542 and 82543-based adapters
+ 80-4096 for all other supported adapters
Default Value: 256
- This value is the number of receive descriptors allocated by the driver.
- Increasing this value allows the driver to buffer more incoming packets.
- Each descriptor is 16 bytes. A receive buffer is allocated for each
- descriptor and can either be 2048 or 4096 bytes long, depending on the MTU
- setting. An incoming packet can span one or more receive descriptors.
- The maximum MTU size is 16110.
+This value specifies the number of receive descriptors allocated by the
+driver. Increasing this value allows the driver to buffer more incoming
+packets. Each descriptor is 16 bytes. A receive buffer is also
+allocated for each descriptor and is 2048.
- NOTE: MTU designates the frame size. It only needs to be set for Jumbo
- Frames.
- NOTE: Depending on the available system resources, the request for a
- higher number of receive descriptors may be denied. In this case,
- use a lower number.
RxIntDelay
-Valid Range: 0-65535 (0=off)
+----------
+Valid Range: 0-65535 (0=off)
Default Value: 0
- This value delays the generation of receive interrupts in units of 1.024
- microseconds. Receive interrupt reduction can improve CPU efficiency if
- properly tuned for specific network traffic. Increasing this value adds
- extra latency to frame reception and can end up decreasing the throughput
- of TCP traffic. If the system is reporting dropped receives, this value
- may be set too high, causing the driver to run out of available receive
- descriptors.
- CAUTION: When setting RxIntDelay to a value other than 0, adapters may
- hang (stop transmitting) under certain network conditions. If
- this occurs a NETDEV WATCHDOG message is logged in the system
- event log. In addition, the controller is automatically reset,
- restoring the network connection. To eliminate the potential for
- the hang ensure that RxIntDelay is set to 0.
+This value delays the generation of receive interrupts in units of 1.024
+microseconds. Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic. If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
-RxAbsIntDelay (82540, 82545 and later adapters only)
-Valid Range: 0-65535 (0=off)
+CAUTION: When setting RxIntDelay to a value other than 0, adapters may
+ hang (stop transmitting) under certain network conditions. If
+ this occurs a NETDEV WATCHDOG message is logged in the system
+ event log. In addition, the controller is automatically reset,
+ restoring the network connection. To eliminate the potential
+ for the hang ensure that RxIntDelay is set to 0.
+
+
+RxAbsIntDelay
+-------------
+(This parameter is supported only on 82540, 82545 and later adapters.)
+Valid Range: 0-65535 (0=off)
Default Value: 128
- This value, in units of 1.024 microseconds, limits the delay in which a
- receive interrupt is generated. Useful only if RxIntDelay is non-zero,
- this value ensures that an interrupt is generated after the initial
- packet is received within the set amount of time. Proper tuning,
- along with RxIntDelay, may improve traffic throughput in specific network
- conditions.
-Speed (adapters using copper connections only)
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated. Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time. Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+
+Speed
+-----
+(This parameter is supported only on adapters with copper connections.)
Valid Settings: 0, 10, 100, 1000
-Default Value: 0 (auto-negotiate at all supported speeds)
- Speed forces the line speed to the specified value in megabits per second
- (Mbps). If this parameter is not specified or is set to 0 and the link
- partner is set to auto-negotiate, the board will auto-detect the correct
- speed. Duplex should also be set when Speed is set to either 10 or 100.
+Default Value: 0 (auto-negotiate at all supported speeds)
+
+Speed forces the line speed to the specified value in megabits per second
+(Mbps). If this parameter is not specified or is set to 0 and the link
+partner is set to auto-negotiate, the board will auto-detect the correct
+speed. Duplex should also be set when Speed is set to either 10 or 100.
+
TxDescriptors
-Valid Range: 80-256 for 82542 and 82543-based adapters
- 80-4096 for all other supported adapters
+-------------
+Valid Range: 80-256 for 82542 and 82543-based adapters
+ 80-4096 for all other supported adapters
Default Value: 256
- This value is the number of transmit descriptors allocated by the driver.
- Increasing this value allows the driver to queue more transmits. Each
- descriptor is 16 bytes.
- NOTE: Depending on the available system resources, the request for a
- higher number of transmit descriptors may be denied. In this case,
- use a lower number.
+This value is the number of transmit descriptors allocated by the driver.
+Increasing this value allows the driver to queue more transmits. Each
+descriptor is 16 bytes.
+
+NOTE: Depending on the available system resources, the request for a
+ higher number of transmit descriptors may be denied. In this case,
+ use a lower number.
+
TxIntDelay
-Valid Range: 0-65535 (0=off)
+----------
+Valid Range: 0-65535 (0=off)
Default Value: 64
- This value delays the generation of transmit interrupts in units of
- 1.024 microseconds. Transmit interrupt reduction can improve CPU
- efficiency if properly tuned for specific network traffic. If the
- system is reporting dropped transmits, this value may be set too high
- causing the driver to run out of available transmit descriptors.
-TxAbsIntDelay (82540, 82545 and later adapters only)
-Valid Range: 0-65535 (0=off)
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds. Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic. If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+
+TxAbsIntDelay
+-------------
+(This parameter is supported only on 82540, 82545 and later adapters.)
+Valid Range: 0-65535 (0=off)
Default Value: 64
- This value, in units of 1.024 microseconds, limits the delay in which a
- transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
- this value ensures that an interrupt is generated after the initial
- packet is sent on the wire within the set amount of time. Proper tuning,
- along with TxIntDelay, may improve traffic throughput in specific
- network conditions.
-XsumRX (not available on the 82542-based adapter)
-Valid Range: 0-1
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time. Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+XsumRX
+------
+(This parameter is NOT supported on the 82542-based adapter.)
+Valid Range: 0-1
Default Value: 1
- A value of '1' indicates that the driver should enable IP checksum
- offload for received packets (both UDP and TCP) to the adapter hardware.
+
+A value of '1' indicates that the driver should enable IP checksum
+offload for received packets (both UDP and TCP) to the adapter hardware.
+
Speed and Duplex Configuration
==============================
-Three keywords are used to control the speed and duplex configuration. These
-keywords are Speed, Duplex, and AutoNeg.
+Three keywords are used to control the speed and duplex configuration.
+These keywords are Speed, Duplex, and AutoNeg.
-If the board uses a fiber interface, these keywords are ignored, and the
+If the board uses a fiber interface, these keywords are ignored, and the
fiber interface board only links at 1000 Mbps full-duplex.
For copper-based boards, the keywords interact as follows:
- The default operation is auto-negotiate. The board advertises all supported
- speed and duplex combinations, and it links at the highest common speed and
- duplex mode IF the link partner is set to auto-negotiate.
+ The default operation is auto-negotiate. The board advertises all
+ supported speed and duplex combinations, and it links at the highest
+ common speed and duplex mode IF the link partner is set to auto-negotiate.
- If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps is
- advertised (The 1000BaseT spec requires auto-negotiation.)
+ If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
+ is advertised (The 1000BaseT spec requires auto-negotiation.)
If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
- negotiation is disabled, and the AutoNeg parameter is ignored. Partner SHOULD
- also be forced.
+ negotiation is disabled, and the AutoNeg parameter is ignored. Partner
+ SHOULD also be forced.
-The AutoNeg parameter is used when more control is required over the auto-
-negotiation process. When this parameter is used, Speed and Duplex parameters
-must not be specified. The following table describes supported values for the
-AutoNeg parameter:
+The AutoNeg parameter is used when more control is required over the
+auto-negotiation process. It should be used when you wish to control which
+speed and duplex combinations are advertised during the auto-negotiation
+process.
-Speed (Mbps) 1000 100 100 10 10
-Duplex Full Full Half Full Half
-Value (in base 16) 0x20 0x08 0x04 0x02 0x01
+The parameter may be specified as either a decimal or hexidecimal value as
+determined by the bitmap below.
-Example: insmod e1000 AutoNeg=0x03, loads e1000 and specifies (10 full duplex,
-10 half duplex) for negotiation with the peer.
+Bit position 7 6 5 4 3 2 1 0
+Decimal Value 128 64 32 16 8 4 2 1
+Hex value 80 40 20 10 8 4 2 1
+Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
+Duplex Full Full Half Full Half
-Note that setting AutoNeg does not guarantee that the board will link at the
-highest specified speed or duplex mode, but the board will link at the
-highest possible speed/duplex of the link partner IF the link partner is also
-set to auto-negotiate. If the link partner is forced speed/duplex, the
-adapter MUST be forced to the same speed/duplex.
+Some examples of using AutoNeg:
+
+ modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half)
+ modprobe e1000 AutoNeg=1 (Same as above)
+ modprobe e1000 AutoNeg=0x02 (Restricts autonegotiation to 10 Full)
+ modprobe e1000 AutoNeg=0x03 (Restricts autonegotiation to 10 Half or 10 Full)
+ modprobe e1000 AutoNeg=0x04 (Restricts autonegotiation to 100 Half)
+ modprobe e1000 AutoNeg=0x05 (Restricts autonegotiation to 10 Half or 100
+ Half)
+ modprobe e1000 AutoNeg=0x020 (Restricts autonegotiation to 1000 Full)
+ modprobe e1000 AutoNeg=32 (Same as above)
+
+Note that when this parameter is used, Speed and Duplex must not be specified.
+
+If the link partner is forced to a specific speed and duplex, then this
+parameter should not be used. Instead, use the Speed and Duplex parameters
+previously mentioned to force the adapter to the same speed and duplex.
Additional Configurations
@@ -276,19 +338,19 @@ Additional Configurations
Configuring the Driver on Different Distributions
-------------------------------------------------
- Configuring a network driver to load properly when the system is started is
- distribution dependent. Typically, the configuration process involves adding
- an alias line to /etc/modules.conf as well as editing other system startup
- scripts and/or configuration files. Many popular Linux distributions ship
- with tools to make these changes for you. To learn the proper way to
- configure a network device for your system, refer to your distribution
- documentation. If during this process you are asked for the driver or module
- name, the name for the Linux Base Driver for the Intel PRO/1000 Family of
- Adapters is e1000.
+ Configuring a network driver to load properly when the system is started
+ is distribution dependent. Typically, the configuration process involves
+ adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
+ as editing other system startup scripts and/or configuration files. Many
+ popular Linux distributions ship with tools to make these changes for you.
+ To learn the proper way to configure a network device for your system,
+ refer to your distribution documentation. If during this process you are
+ asked for the driver or module name, the name for the Linux Base Driver
+ for the Intel PRO/1000 Family of Adapters is e1000.
- As an example, if you install the e1000 driver for two PRO/1000 adapters
- (eth0 and eth1) and set the speed and duplex to 10full and 100half, add the
- following to modules.conf:
+ As an example, if you install the e1000 driver for two PRO/1000 adapters
+ (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
+ the following to modules.conf or or modprobe.conf:
alias eth0 e1000
alias eth1 e1000
@@ -297,9 +359,9 @@ Additional Configurations
Viewing Link Messages
---------------------
- Link messages will not be displayed to the console if the distribution is
- restricting system messages. In order to see network driver link messages on
- your console, set dmesg to eight by entering the following:
+ Link messages will not be displayed to the console if the distribution is
+ restricting system messages. In order to see network driver link messages
+ on your console, set dmesg to eight by entering the following:
dmesg -n 8
@@ -308,22 +370,42 @@ Additional Configurations
Jumbo Frames
------------
- The driver supports Jumbo Frames for all adapters except 82542-based
- adapters. Jumbo Frames support is enabled by changing the MTU to a value
- larger than the default of 1500. Use the ifconfig command to increase the
- MTU size. For example:
+ The driver supports Jumbo Frames for all adapters except 82542 and
+ 82573-based adapters. Jumbo Frames support is enabled by changing the
+ MTU to a value larger than the default of 1500. Use the ifconfig command
+ to increase the MTU size. For example:
- ifconfig ethx mtu 9000 up
+ ifconfig eth mtu 9000 up
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
- with the maximum Jumbo Frames size of 16128.
+ This setting is not saved across reboots. It can be made permanent if
+ you add:
- NOTE: Jumbo Frames are supported at 1000 Mbps only. Using Jumbo Frames at
- 10 or 100 Mbps may result in poor performance or loss of link.
+ MTU=9000
+ to the file /etc/sysconfig/network-scripts/ifcfg-eth. This example
+ applies to the Red Hat distributions; other distributions may store this
+ setting in a different location.
+
+ Notes:
+
+ - To enable Jumbo Frames, increase the MTU size on the interface beyond
+ 1500.
+ - The maximum MTU setting for Jumbo Frames is 16110. This value coincides
+ with the maximum Jumbo Frames size of 16128.
+ - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
+ loss of link.
+ - Some Intel gigabit adapters that support Jumbo Frames have a frame size
+ limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
+ The adapters with this limitation are based on the Intel 82571EB and
+ 82572EI controllers, which correspond to these product names:
+ Intel® PRO/1000 PT Dual Port Server Adapter
+ Intel® PRO/1000 PF Dual Port Server Adapter
+ Intel® PRO/1000 PT Server Adapter
+ Intel® PRO/1000 PT Desktop Adapter
+ Intel® PRO/1000 PF Server Adapter
+
+ - The Intel PRO/1000 PM Network Connection does not support jumbo frames.
- NOTE: MTU designates the frame size. To enable Jumbo Frames, increase the
- MTU size on the interface beyond 1500.
Ethtool
-------
@@ -333,32 +415,41 @@ Additional Configurations
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
- http://sf.net/projects/gkernel.
+ http://sourceforge.net/projects/gkernel.
- NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
- for a more complete ethtool feature set can be enabled by upgrading
- ethtool to ethtool-1.8.1.
+ NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
+ for a more complete ethtool feature set can be enabled by upgrading
+ ethtool to ethtool-1.8.1.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility. Ethtool is included with
- all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
- download and install Ethtool from the following website:
+ all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
+ download and install Ethtool from the following website:
http://sourceforge.net/projects/gkernel.
- For instructions on enabling WoL with Ethtool, refer to the website listed
+ For instructions on enabling WoL with Ethtool, refer to the website listed
above.
- WoL will be enabled on the system during the next shut down or reboot.
- For this driver version, in order to enable WoL, the e1000 driver must be
+ WoL will be enabled on the system during the next shut down or reboot.
+ For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
NAPI
----
NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled
- or disabled based on the configuration of the kernel.
+ or disabled based on the configuration of the kernel. To override
+ the default, use the following compile-time flags.
+
+ To enable NAPI, compile the driver module, passing in a configuration option:
+
+ make CFLAGS_EXTRA=-DE1000_NAPI install
+
+ To disable NAPI, compile the driver module, passing in a configuration option:
+
+ make CFLAGS_EXTRA=-DE1000_NO_NAPI install
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
@@ -369,10 +460,85 @@ Known Issues
Jumbo Frames System Requirement
-------------------------------
- Memory allocation failures have been observed on Linux systems with 64 MB
- of RAM or less that are running Jumbo Frames. If you are using Jumbo Frames,
- your system may require more than the advertised minimum requirement of 64 MB
- of system memory.
+ Memory allocation failures have been observed on Linux systems with 64 MB
+ of RAM or less that are running Jumbo Frames. If you are using Jumbo
+ Frames, your system may require more than the advertised minimum
+ requirement of 64 MB of system memory.
+
+ Performance Degradation with Jumbo Frames
+ -----------------------------------------
+
+ Degradation in throughput performance may be observed in some Jumbo frames
+ environments. If this is observed, increasing the application's socket
+ buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
+ may help. See the specific application manual and
+ /usr/src/linux*/Documentation/
+ networking/ip-sysctl.txt for more details.
+
+ Jumbo frames on Foundry BigIron 8000 switch
+ -------------------------------------------
+ There is a known issue using Jumbo frames when connected to a Foundry
+ BigIron 8000 switch. This is a 3rd party limitation. If you experience
+ loss of packets, lower the MTU size.
+
+ Multiple Interfaces on Same Ethernet Broadcast Network
+ ------------------------------------------------------
+
+ Due to the default ARP behavior on Linux, it is not possible to have
+ one system on two IP networks in the same Ethernet broadcast domain
+ (non-partitioned switch) behave as expected. All Ethernet interfaces
+ will respond to IP traffic for any IP address assigned to the system.
+ This results in unbalanced receive traffic.
+
+ If you have multiple interfaces in a server, either turn on ARP
+ filtering by entering:
+
+ echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+ (this only works if your kernel's version is higher than 2.4.5),
+
+ NOTE: This setting is not saved across reboots. The configuration
+ change can be made permanent by adding the line:
+ net.ipv4.conf.all.arp_filter = 1
+ to the file /etc/sysctl.conf
+
+ or,
+
+ install the interfaces in separate broadcast domains (either in
+ different switches or in a switch partitioned to VLANs).
+
+ 82541/82547 can't link or are slow to link with some link partners
+ -----------------------------------------------------------------
+
+ There is a known compatibility issue with 82541/82547 and some
+ low-end switches where the link will not be established, or will
+ be slow to establish. In particular, these switches are known to
+ be incompatible with 82541/82547:
+
+ Planex FXG-08TE
+ I-O Data ETG-SH8
+
+ To workaround this issue, the driver can be compiled with an override
+ of the PHY's master/slave setting. Forcing master or forcing slave
+ mode will improve time-to-link.
+
+ # make EXTRA_CFLAGS=-DE1000_MASTER_SLAVE=
+
+ Where is:
+
+ 0 = Hardware default
+ 1 = Master mode
+ 2 = Slave mode
+ 3 = Auto master/slave
+
+ Disable rx flow control with ethtool
+ ------------------------------------
+
+ In order to disable receive flow control using ethtool, you must turn
+ off auto-negotiation on the same command line.
+
+ For example:
+
+ ethtool -A eth? autoneg off rx off
Support
@@ -382,20 +548,24 @@ For general information, go to the Intel support website at:
http://support.intel.com
+ or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to
-the issue to linux.nics@intel.com.
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sourceforge.net
License
=======
-This software program is released under the terms of a license agreement
-between you ('Licensee') and Intel. Do not use or load this software or any
-associated materials (collectively, the 'Software') until you have carefully
-read the full terms and conditions of the LICENSE located in this software
-package. By loading or using the Software, you agree to the terms of this
-Agreement. If you do not agree with the terms of this Agreement, do not
+This software program is released under the terms of a license agreement
+between you ('Licensee') and Intel. Do not use or load this software or any
+associated materials (collectively, the 'Software') until you have carefully
+read the full terms and conditions of the file COPYING located in this software
+package. By loading or using the Software, you agree to the terms of this
+Agreement. If you do not agree with the terms of this Agreement, do not
install or use the Software.
* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 26364d06ae92..f12007b80a46 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -355,6 +355,13 @@ somaxconn - INTEGER
Defaults to 128. See also tcp_max_syn_backlog for additional tuning
for TCP sockets.
+tcp_workaround_signed_windows - BOOLEAN
+ If set, assume no receipt of a window scaling option means the
+ remote TCP is broken and treats the window as a signed quantity.
+ If unset, assume the remote TCP is not broken even if we do
+ not receive a window scaling option from them.
+ Default: 0
+
IP Variables:
ip_local_port_range - 2 INTEGERS
@@ -619,6 +626,11 @@ arp_ignore - INTEGER
The max value from conf/{all,interface}/arp_ignore is used
when ARP request is received on the {interface}
+arp_accept - BOOLEAN
+ Define behavior when gratuitous arp replies are received:
+ 0 - drop gratuitous arp frames
+ 1 - accept gratuitous arp frames
+
app_solicit - INTEGER
The maximum number of probes to send to the user space ARP daemon
via netlink before dropping back to multicast probes (see
@@ -717,6 +729,33 @@ accept_ra - BOOLEAN
Functional default: enabled if local forwarding is disabled.
disabled if local forwarding is enabled.
+accept_ra_defrtr - BOOLEAN
+ Learn default router in Router Advertisement.
+
+ Functional default: enabled if accept_ra is enabled.
+ disabled if accept_ra is disabled.
+
+accept_ra_pinfo - BOOLEAN
+ Learn Prefix Inforamtion in Router Advertisement.
+
+ Functional default: enabled if accept_ra is enabled.
+ disabled if accept_ra is disabled.
+
+accept_ra_rt_info_max_plen - INTEGER
+ Maximum prefix length of Route Information in RA.
+
+ Route Information w/ prefix larger than or equal to this
+ variable shall be ignored.
+
+ Functional default: 0 if accept_ra_rtr_pref is enabled.
+ -1 if accept_ra_rtr_pref is disabled.
+
+accept_ra_rtr_pref - BOOLEAN
+ Accept Router Preference in RA.
+
+ Functional default: enabled if accept_ra is enabled.
+ disabled if accept_ra is disabled.
+
accept_redirects - BOOLEAN
Accept Redirects.
@@ -727,8 +766,8 @@ autoconf - BOOLEAN
Autoconfigure addresses using Prefix Information in Router
Advertisements.
- Functional default: enabled if accept_ra is enabled.
- disabled if accept_ra is disabled.
+ Functional default: enabled if accept_ra_pinfo is enabled.
+ disabled if accept_ra_pinfo is disabled.
dad_transmits - INTEGER
The amount of Duplicate Address Detection probes to send.
@@ -771,6 +810,12 @@ mtu - INTEGER
Default Maximum Transfer Unit
Default: 1280 (IPv6 required minimum)
+router_probe_interval - INTEGER
+ Minimum interval (in seconds) between Router Probing described
+ in RFC4191.
+
+ Default: 60
+
router_solicitation_delay - INTEGER
Number of seconds to wait after interface is brought up
before sending Router Solicitations.
diff --git a/Documentation/usb/et61x251.txt b/Documentation/usb/et61x251.txt
index b44dda407ce2..29340282ab5f 100644
--- a/Documentation/usb/et61x251.txt
+++ b/Documentation/usb/et61x251.txt
@@ -176,6 +176,14 @@ Description: Force the application to unmap previously mapped buffer memory
1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
+Name: frame_timeout
+Type: uint array (min = 0, max = 64)
+Syntax:
+Description: Timeout for a video frame in seconds. This parameter is
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax:
@@ -266,7 +274,7 @@ the V4L2 interface.
10. Notes for V4L2 application developers
-========================================
+=========================================
This driver follows the V4L2 API specifications. In particular, it enforces two
rules:
diff --git a/Documentation/usb/sn9c102.txt b/Documentation/usb/sn9c102.txt
index c6b76414172c..b957beae5607 100644
--- a/Documentation/usb/sn9c102.txt
+++ b/Documentation/usb/sn9c102.txt
@@ -196,6 +196,14 @@ Description: Force the application to unmap previously mapped buffer memory
1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
+Name: frame_timeout
+Type: uint array (min = 0, max = 64)
+Syntax:
+Description: Timeout for a video frame in seconds. This parameter is
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax:
@@ -321,6 +329,7 @@ Vendor ID Product ID
--------- ----------
0x0c45 0x6001
0x0c45 0x6005
+0x0c45 0x6007
0x0c45 0x6009
0x0c45 0x600d
0x0c45 0x6024
@@ -370,6 +379,7 @@ HV7131D Hynix Semiconductor, Inc.
MI-0343 Micron Technology, Inc.
OV7630 OmniVision Technologies, Inc.
PAS106B PixArt Imaging, Inc.
+PAS202BCA PixArt Imaging, Inc.
PAS202BCB PixArt Imaging, Inc.
TAS5110C1B Taiwan Advanced Sensor Corporation
TAS5130D1B Taiwan Advanced Sensor Corporation
@@ -493,6 +503,7 @@ Many thanks to following persons for their contribute (listed in alphabetical
order):
- Luca Capello for the donation of a webcam;
+- Philippe Coval for having helped testing the PAS202BCA image sensor;
- Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
donation of a webcam;
- Jon Hollstrom for the donation of a webcam;
diff --git a/Documentation/usb/zc0301.txt b/Documentation/usb/zc0301.txt
new file mode 100644
index 000000000000..f55262c6733b
--- /dev/null
+++ b/Documentation/usb/zc0301.txt
@@ -0,0 +1,254 @@
+
+ ZC0301 Image Processor and Control Chip
+ Driver for Linux
+ =======================================
+
+ - Documentation -
+
+
+Index
+=====
+1. Copyright
+2. Disclaimer
+3. License
+4. Overview and features
+5. Module dependencies
+6. Module loading
+7. Module parameters
+8. Supported devices
+9. Notes for V4L2 application developers
+10. Contact information
+11. Credits
+
+
+1. Copyright
+============
+Copyright (C) 2006 by Luca Risolia
+
+
+2. Disclaimer
+=============
+This software is not developed or sponsored by Z-Star Microelectronics Corp.
+Trademarks are property of their respective owner.
+
+
+3. License
+==========
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+4. Overview and features
+========================
+This driver supports the video interface of the devices mounting the ZC0301
+Image Processor and Control Chip.
+
+The driver relies on the Video4Linux2 and USB core modules. It has been
+designed to run properly on SMP systems as well.
+
+The latest version of the ZC0301 driver can be found at the following URL:
+http://www.linux-projects.org/
+
+Some of the features of the driver are:
+
+- full compliance with the Video4Linux2 API (see also "Notes for V4L2
+ application developers" paragraph);
+- available mmap or read/poll methods for video streaming through isochronous
+ data transfers;
+- automatic detection of image sensor;
+- video format is standard JPEG;
+- dynamic driver control thanks to various module parameters (see "Module
+ parameters" paragraph);
+- up to 64 cameras can be handled at the same time; they can be connected and
+ disconnected from the host many times without turning off the computer, if
+ the system supports hotplugging;
+
+
+5. Module dependencies
+======================
+For it to work properly, the driver needs kernel support for Video4Linux and
+USB.
+
+The following options of the kernel configuration file must be enabled and
+corresponding modules must be compiled:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_DEV=m
+
+ # USB support
+ #
+ CONFIG_USB=m
+
+In addition, depending on the hardware being used, the modules below are
+necessary:
+
+ # USB Host Controller Drivers
+ #
+ CONFIG_USB_EHCI_HCD=m
+ CONFIG_USB_UHCI_HCD=m
+ CONFIG_USB_OHCI_HCD=m
+
+The ZC0301 controller also provides a built-in microphone interface. It is
+supported by the USB Audio driver thanks to the ALSA API:
+
+ # Sound
+ #
+ CONFIG_SOUND=y
+
+ # Advanced Linux Sound Architecture
+ #
+ CONFIG_SND=m
+
+ # USB devices
+ #
+ CONFIG_SND_USB_AUDIO=m
+
+And finally:
+
+ # USB Multimedia devices
+ #
+ CONFIG_USB_ZC0301=m
+
+
+6. Module loading
+=================
+To use the driver, it is necessary to load the "zc0301" module into memory
+after every other module required: "videodev", "usbcore" and, depending on
+the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+
+Loading can be done as shown below:
+
+ [root@localhost home]# modprobe zc0301
+
+At this point the devices should be recognized. You can invoke "dmesg" to
+analyze kernel messages and verify that the loading process has gone well:
+
+ [user@localhost home]$ dmesg
+
+
+7. Module parameters
+====================
+Module parameters are listed below:
+-------------------------------------------------------------------------------
+Name: video_nr
+Type: short array (min = 0, max = 64)
+Syntax: <-1|n[,...]>
+Description: Specify V4L2 minor mode number:
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 64 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ registered camera and use auto for the first one and for every
+ other camera.
+Default: -1
+-------------------------------------------------------------------------------
+Name: force_munmap
+Type: bool array (min = 0, max = 64)
+Syntax: <0|1[,...]>
+Description: Force the application to unmap previously mapped buffer memory
+ before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+ all the applications support this feature. This parameter is
+ specific for each detected camera.
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
+Default: 0
+-------------------------------------------------------------------------------
+Name: frame_timeout
+Type: uint array (min = 0, max = 64)
+Syntax:
+Description: Timeout for a video frame in seconds. This parameter is
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
+Name: debug
+Type: ushort
+Syntax:
+Description: Debugging information level, from 0 to 3:
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = more verbose messages
+ Level 3 is useful for testing only, when only one device
+ is used at the same time. It also shows some more informations
+ about the hardware being detected. This module parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
+
+
+8. Supported devices
+====================
+None of the names of the companies as well as their products will be mentioned
+here. They have never collaborated with the author, so no advertising.
+
+From the point of view of a driver, what unambiguously identify a device are
+its vendor and product USB identifiers. Below is a list of known identifiers of
+devices mounting the ZC0301 Image Processor and Control Chips:
+
+Vendor ID Product ID
+--------- ----------
+0x041e 0x4017
+0x041e 0x401c
+0x041e 0x401e
+0x041e 0x4034
+0x041e 0x4035
+0x046d 0x08ae
+0x0ac8 0x0301
+0x10fd 0x8050
+
+The list above does not imply that all those devices work with this driver: up
+until now only the ones that mount the following image sensors are supported;
+kernel messages will always tell you whether this is the case:
+
+Model Manufacturer
+----- ------------
+PAS202BCB PixArt Imaging, Inc.
+
+
+9. Notes for V4L2 application developers
+========================================
+This driver follows the V4L2 API specifications. In particular, it enforces two
+rules:
+
+- exactly one I/O method, either "mmap" or "read", is associated with each
+file descriptor. Once it is selected, the application must close and reopen the
+device to switch to the other I/O method;
+
+- although it is not mandatory, previously mapped buffer memory should always
+be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
+The same number of buffers as before will be allocated again to match the size
+of the new video frames, so you have to map the buffers again before any I/O
+attempts on them.
+
+
+10. Contact information
+=======================
+The author may be contacted by e-mail at .
+
+GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
+'FCE635A4'; the public 1024-bit key should be available at any keyserver;
+the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
+
+
+11. Credits
+===========
+- Informations about the chip internals needed to enable the I2C protocol have
+ been taken from the documentation of the ZC030x Video4Linux1 driver written
+ by Andrew Birkett ;
+- The initialization values of the ZC0301 controller connected to the PAS202BCB
+ image sensor have been taken from the SPCA5XX driver maintained by
+ Michel Xhaard .
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 8bea3fbd0548..3b39a91b24bd 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -43,3 +43,5 @@
42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1]
44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]
+ 45 -> KWorld HardwareMpegTV XPert [17de:0840]
+ 46 -> DViCO FusionHDTV DVB-T Hybrid [18ac:db40,18ac:db44]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a0c7cad20971..a3026689bbe6 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -8,3 +8,4 @@
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]
+ 12 -> Kworld PVR TV 2800 RF (em2820/em2840)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index da4fb890165f..8c7195455963 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -83,3 +83,12 @@
82 -> MSI TV@Anywhere plus [1462:6231]
83 -> Terratec Cinergy 250 PCI TV [153b:1160]
84 -> LifeView FlyDVB Trio [5168:0319]
+ 85 -> AverTV DVB-T 777 [1461:2c05]
+ 86 -> LifeView FlyDVB-T [5168:0301]
+ 87 -> ADS Instant TV Duo Cardbus PTV331 [0331:1421]
+ 88 -> Tevion/KWorld DVB-T 220RF [17de:7201]
+ 89 -> ELSA EX-VISION 700TV [1048:226c]
+ 90 -> Kworld ATSC110 [17de:7350]
+ 91 -> AVerMedia A169 B [1461:7360]
+ 92 -> AVerMedia A169 B1 [1461:6360]
+ 93 -> Medion 7134 Bridge #2 [16be:0005]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index f6d0cf7b7922..1bcdac67dd8c 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -64,8 +64,10 @@ tuner=62 - Philips TEA5767HN FM Radio
tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
tuner=64 - LG TDVS-H062F/TUA6034
tuner=65 - Ymec TVF66T5-B/DFF
-tuner=66 - LG NTSC (TALN mini series)
+tuner=66 - LG TALN series
tuner=67 - Philips TD1316 Hybrid Tuner
tuner=68 - Philips TUV1236D ATSC/NTSC dual in
-tuner=69 - Tena TNF 5335 MF
+tuner=69 - Tena TNF 5335 and similar models
tuner=70 - Samsung TCPN 2121P30A
+tuner=71 - Xceive xc3028
+tuner=72 - Thomson FE6600
diff --git a/Documentation/video4linux/README.cpia2 b/Documentation/video4linux/README.cpia2
new file mode 100644
index 000000000000..ce8213d28b67
--- /dev/null
+++ b/Documentation/video4linux/README.cpia2
@@ -0,0 +1,130 @@
+$Id: README,v 1.7 2005/08/29 23:39:57 sbertin Exp $
+
+1. Introduction
+
+ This is a driver for STMicroelectronics's CPiA2 (second generation
+Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
+stream at up to vga size. It implements the Video4Linux interface as much as
+possible. Since the V4L interface does not support compressed formats, only
+an mjpeg enabled application can be used with the camera. We have modified the
+gqcam application to view this stream.
+
+ The driver is implemented as two kernel modules. The cpia2 module
+contains the camera functions and the V4L interface. The cpia2_usb module
+contains usb specific functions. The main reason for this was the size of the
+module was getting out of hand, so I separted them. It is not likely that
+there will be a parallel port version.
+
+FEATURES:
+ - Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
+ sensors. I only have the vga sensor, so can't test the other.
+ - Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
+ VGA and QVGA are the native image sizes for the VGA camera. CIF is done
+ in the coprocessor by scaling QVGA. All other sizes are done by clipping.
+ - Palette: YCrCb, compressed with MJPEG.
+ - Some compression parameters are settable.
+ - Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
+ - Adjust brightness, color, contrast while streaming.
+ - Flicker control settable for 50 or 60 Hz mains frequency.
+
+2. Making and installing the stv672 driver modules:
+
+ Requirements:
+ -------------
+ This should work with 2.4 (2.4.23 and later) and 2.6 kernels, but has
+only been tested on 2.6. Video4Linux must be either compiled into the kernel or
+available as a module. Video4Linux2 is automatically detected and made
+available at compile time.
+
+ Compiling:
+ ----------
+ As root, do a make install. This will compile and install the modules
+into the media/video directory in the module tree. For 2.4 kernels, use
+Makefile_2.4 (aka do make -f Makefile_2.4 install).
+
+ Setup:
+ ------
+ Use 'modprobe cpia2' to load and 'modprobe -r cpia2' to unload. This
+may be done automatically by your distribution.
+
+3. Driver options
+
+ Option Description
+ ------ -----------
+ video_nr video device to register (0=/dev/video0, etc)
+ range -1 to 64. default is -1 (first available)
+ If you have more than 1 camera, this MUST be -1.
+ buffer_size Size for each frame buffer in bytes (default 68k)
+ num_buffers Number of frame buffers (1-32, default 3)
+ alternate USB Alternate (2-7, default 7)
+ flicker_freq Frequency for flicker reduction(50 or 60, default 60)
+ flicker_mode 0 to disable, or 1 to enable flicker reduction.
+ (default 0). This is only effective if the camera
+ uses a stv0672 coprocessor.
+
+ Setting the options:
+ --------------------
+ If you are using modules, edit /etc/modules.conf and add an options
+line like this:
+ options cpia2 num_buffers=3 buffer_size=65535
+
+ If the driver is compiled into the kernel, at boot time specify them
+like this:
+ cpia2.num_buffers=3 cpia2.buffer_size=65535
+
+ What buffer size should I use?
+ ------------------------------
+ The maximum image size depends on the alternate you choose, and the
+frame rate achieved by the camera. If the compression engine is able to
+keep up with the frame rate, the maximum image size is given by the table
+below.
+ The compression engine starts out at maximum compression, and will
+increase image quality until it is close to the size in the table. As long
+as the compression engine can keep up with the frame rate, after a short time
+the images will all be about the size in the table, regardless of resolution.
+ At low alternate settings, the compression engine may not be able to
+compress the image enough and will reduce the frame rate by producing larger
+images.
+ The default of 68k should be good for most users. This will handle
+any alternate at frame rates down to 15fps. For lower frame rates, it may
+be necessary to increase the buffer size to avoid having frames dropped due
+to insufficient space.
+
+ Image size(bytes)
+ Alternate bytes/ms 15fps 30fps
+ 2 128 8533 4267
+ 3 384 25600 12800
+ 4 640 42667 21333
+ 5 768 51200 25600
+ 6 896 59733 29867
+ 7 1023 68200 34100
+
+ How many buffers should I use?
+ ------------------------------
+ For normal streaming, 3 should give the best results. With only 2,
+it is possible for the camera to finish sending one image just after a
+program has started reading the other. If this happens, the driver must drop
+a frame. The exception to this is if you have a heavily loaded machine. In
+this case use 2 buffers. You are probably not reading at the full frame rate.
+If the camera can send multiple images before a read finishes, it could
+overwrite the third buffer before the read finishes, leading to a corrupt
+image. Single and double buffering have extra checks to avoid overwriting.
+
+4. Using the camera
+
+ We are providing a modified gqcam application to view the output. In
+order to avoid confusion, here it is called mview. There is also the qx5view
+program which can also control the lights on the qx5 microscope. MJPEG Tools
+(http://mjpeg.sourceforge.net) can also be used to record from the camera.
+
+5. Notes to developers:
+
+ - This is a driver version stripped of the 2.4 back compatibility
+ and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support.
+
+6. Thanks:
+
+ - Peter Pregler ,
+ Scott J. Bertin , and
+ Jarl Totland for the original cpia driver, which
+ this one was modelled from.
diff --git a/Documentation/video4linux/cpia2_overview.txt b/Documentation/video4linux/cpia2_overview.txt
new file mode 100644
index 000000000000..a6e53665216b
--- /dev/null
+++ b/Documentation/video4linux/cpia2_overview.txt
@@ -0,0 +1,38 @@
+ Programmer's View of Cpia2
+
+Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a
+division of ST Microelectronics). There are two versions. The first is the
+STV0672, which is capable of up to 30 frames per second (fps) in frame sizes
+up to CIF, and 15 fps for VGA frames. The STV0676 is an improved version,
+which can handle up to 30 fps VGA. Both coprocessors can be attached to two
+CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor. These will
+be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors.
+
+The two chipsets operate almost identically. The core is an 8051 processor,
+running two different versions of firmware. The 672 runs the VP4 video
+processor code, the 676 runs VP5. There are a few differences in register
+mappings for the two chips. In these cases, the symbols defined in the
+header files are marked with VP4 or VP5 as part of the symbol name.
+
+The cameras appear externally as three sets of registers. Setting register
+values is the only way to control the camera. Some settings are
+interdependant, such as the sequence required to power up the camera. I will
+try to make note of all of these cases.
+
+The register sets are called blocks. Block 0 is the system block. This
+section is always powered on when the camera is plugged in. It contains
+registers that control housekeeping functions such as powering up the video
+processor. The video processor is the VP block. These registers control
+how the video from the sensor is processed. Examples are timing registers,
+user mode (vga, qvga), scaling, cropping, framerates, and so on. The last
+block is the video compressor (VC). The video stream sent from the camera is
+compressed as Motion JPEG (JPEGA). The VC controls all of the compression
+parameters. Looking at the file cpia2_registers.h, you can get a full view
+of these registers and the possible values for most of them.
+
+One or more registers can be set or read by sending a usb control message to
+the camera. There are three modes for this. Block mode requests a number
+of contiguous registers. Random mode reads or writes random registers with
+a tuple structure containing address/value pairs. The repeat mode is only
+used by VP4 to load a firmware patch. It contains a starting address and
+a sequence of bytes to be written into a gpio port.
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index 8db5c339845d..ebef0ae90e2e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1349,10 +1349,10 @@ S: Maintained
INTEL PRO/100 ETHERNET SUPPORT
P: John Ronciak
M: john.ronciak@intel.com
-P: Ganesh Venkatesan
-M: ganesh.venkatesan@intel.com
P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
+P: Jeff Kirsher
+M: jeffrey.t.kirsher@intel.com
W: http://sourceforge.net/projects/e1000/
S: Supported
@@ -1361,18 +1361,22 @@ P: Jeb Cramer
M: cramerj@intel.com
P: John Ronciak
M: john.ronciak@intel.com
-P: Ganesh Venkatesan
-M: ganesh.venkatesan@intel.com
+P: Jesse Brandeburg
+M: jesse.brandeburg@intel.com
+P: Jeff Kirsher
+M: jeffrey.t.kirsher@intel.com
W: http://sourceforge.net/projects/e1000/
S: Supported
INTEL PRO/10GbE SUPPORT
+P: Jeff Kirsher
+M: jeffrey.t.kirsher@intel.com
P: Ayyappan Veeraiyan
M: ayyappan.veeraiyan@intel.com
-P: Ganesh Venkatesan
-M: ganesh.venkatesan@intel.com
P: John Ronciak
M: john.ronciak@intel.com
+P: Jesse Brandeburg
+M: jesse.brandeburg@intel.com
W: http://sourceforge.net/projects/e1000/
S: Supported
@@ -1524,12 +1528,6 @@ M: davem@davemloft.net
L: linux-kernel@vger.kernel.org
S: Maintained
-LANMEDIA WAN CARD DRIVER
-P: Andrew Stanley-Jones
-M: asj@lanmedia.com
-W: http://www.lanmedia.com/
-S: Supported
-
LAPB module
P: Henner Eisen
M: eis@baty.hanse.de
@@ -2902,6 +2900,14 @@ L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
+USB ZC0301 DRIVER
+P: Luca Risolia
+M: luca.risolia@studio.unibo.it
+L: linux-usb-devel@lists.sourceforge.net
+L: video4linux-list@redhat.com
+W: http://www.linux-projects.org
+S: Maintained
+
USB ZD1201 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
diff --git a/README b/README
index 0d318abaf7fd..05e055530bbb 100644
--- a/README
+++ b/README
@@ -74,7 +74,7 @@ INSTALLING the kernel:
whatever the kernel-du-jour happens to be.
- You can also upgrade between 2.6.xx releases by patching. Patches are
- distributed in the traditional gzip and the new bzip2 format. To
+ distributed in the traditional gzip and the newer bzip2 format. To
install by patching, get all the newer patch files, enter the
top level directory of the kernel source (linux-2.6.xx) and execute:
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index d31b1cb7eea0..23609400a8e2 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -788,6 +788,8 @@ static int locomo_probe(struct platform_device *dev)
if (!mem)
return -EINVAL;
irq = platform_get_irq(dev, 0);
+ if (irq < 0)
+ return -ENXIO;
return __locomo_probe(&dev->dev, mem, irq);
}
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1475089f9b42..93352f6097c1 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -943,6 +943,8 @@ static int sa1111_probe(struct platform_device *pdev)
if (!mem)
return -EINVAL;
irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENXIO;
return __sa1111_probe(&pdev->dev, mem, irq);
}
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 4303d988c4bf..d13270c5d7cd 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -202,11 +202,6 @@ struct clk realview_clcd_clk = {
/*
* CLCD support.
*/
-#define SYS_CLCD_MODE_MASK (3 << 0)
-#define SYS_CLCD_MODE_888 (0 << 0)
-#define SYS_CLCD_MODE_5551 (1 << 0)
-#define SYS_CLCD_MODE_565_RLSB (2 << 0)
-#define SYS_CLCD_MODE_565_BLSB (3 << 0)
#define SYS_CLCD_NLCDIOON (1 << 2)
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
@@ -360,29 +355,10 @@ static void realview_clcd_enable(struct clcd_fb *fb)
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
u32 val;
+ /*
+ * Enable the PSUs
+ */
val = readl(sys_clcd);
- val &= ~SYS_CLCD_MODE_MASK;
-
- switch (fb->fb.var.green.length) {
- case 5:
- val |= SYS_CLCD_MODE_5551;
- break;
- case 6:
- val |= SYS_CLCD_MODE_565_RLSB;
- break;
- case 8:
- val |= SYS_CLCD_MODE_888;
- break;
- }
-
- /*
- * Set the MUX
- */
- writel(val, sys_clcd);
-
- /*
- * And now enable the PSUs
- */
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
}
diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index 3cbe6e9cb9fc..1629c3ac9bee 100644
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -1,49 +1,87 @@
#
# Automatically generated make config: don't edit
#
+CONFIG_X86_32=y
+CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_VM86=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
@@ -66,43 +104,50 @@ CONFIG_X86_PC=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-CONFIG_MPENTIUM4=y
+# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
+CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
+CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
-# CONFIG_HPET_EMULATE_RTC is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT=y
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
-CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
-CONFIG_X86_MCE_P4THERMAL=y
+# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
@@ -111,41 +156,71 @@ CONFIG_X86_MCE_P4THERMAL=y
# Firmware Drivers
#
# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
-CONFIG_IRQBALANCE=y
-CONFIG_HAVE_DEC_LOCK=y
-# CONFIG_REGPARM is not set
+CONFIG_REGPARM=y
+# CONFIG_SECCOMP is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_KEXEC is not set
+CONFIG_PHYSICAL_START=0x100000
+CONFIG_DOUBLEFAULT=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
+CONFIG_PM_STD_PARTITION="/dev/hda2"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_SLEEP is not set
+# CONFIG_ACPI_AC is not set
+# CONFIG_ACPI_BATTERY is not set
+# CONFIG_ACPI_BUTTON is not set
+# CONFIG_ACPI_VIDEO is not set
+# CONFIG_ACPI_HOTKEY is not set
+# CONFIG_ACPI_FAN is not set
+# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
+# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
@@ -168,19 +243,18 @@ CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCI_USE_VECTOR is not set
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-CONFIG_ISA=y
-# CONFIG_EISA is not set
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
-# PCMCIA/CardBus support
+# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCMCIA is not set
-CONFIG_PCMCIA_PROBE=y
+# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
@@ -191,8 +265,147 @@ CONFIG_PCMCIA_PROBE=y
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=y
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+# CONFIG_IP_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+# CONFIG_IP_NF_MATCH_AH_ESP is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_FILTER=y
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=y
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TARGET_TCPMSS is not set
+# CONFIG_IP_NF_NAT is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -201,7 +414,14 @@ CONFIG_BINFMT_MISC=y
#
# Generic Driver Options
#
-CONFIG_FW_LOADER=m
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -213,40 +433,36 @@ CONFIG_FW_LOADER=m
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-# CONFIG_ISAPNP is not set
-# CONFIG_PNPBIOS is not set
+# CONFIG_PNP is not set
#
# Block devices
#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_LBD=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -257,34 +473,31 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
+# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_CMD640=y
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_RZ1000=y
+# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
@@ -294,10 +507,12 @@ CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -306,9 +521,8 @@ CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
@@ -317,8 +531,9 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
@@ -327,7 +542,8 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -341,78 +557,46 @@ CONFIG_CHR_DEV_SG=y
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_DPT_I2O=m
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_SVW is not set
-CONFIG_SCSI_ATA_PIIX=y
-# CONFIG_SCSI_SATA_PROMISE is not set
-CONFIG_SCSI_SATA_SX4=m
-# CONFIG_SCSI_SATA_SIL is not set
-CONFIG_SCSI_SATA_SIS=m
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
#
# Multi-device support (RAID and LVM)
#
@@ -422,37 +606,14 @@ CONFIG_SCSI_QLA2XXX=y
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
-
-#
-# Device Drivers
-#
-
-#
-# Texas Instruments PCILynx requires I2C
-#
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocol Drivers
-#
-# CONFIG_IEEE1394_VIDEO1394 is not set
-# CONFIG_IEEE1394_SBP2 is not set
-# CONFIG_IEEE1394_ETH1394 is not set
-# CONFIG_IEEE1394_DV1394 is not set
-CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
+# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -460,136 +621,24 @@ CONFIG_IEEE1394_RAWIO=y
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_FTP is not set
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-CONFIG_IP_NF_MATCH_OWNER=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_TARGET_ULOG=y
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_RAW=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
+# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
@@ -597,40 +646,28 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
+CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -644,21 +681,24 @@ CONFIG_8139TOO_PIO=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
+# CONFIG_S2IO is not set
#
# Token Ring devices
@@ -682,6 +722,8 @@ CONFIG_S2IO=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -703,25 +745,13 @@ CONFIG_INPUT=y
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
#
# Input Device Drivers
#
@@ -734,14 +764,24 @@ CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
@@ -757,12 +797,14 @@ CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -770,7 +812,6 @@ CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
-# CONFIG_QIC02_TAPE is not set
#
# IPMI
@@ -782,9 +823,8 @@ CONFIG_PRINTER=y
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+CONFIG_NVRAM=y
+CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -793,62 +833,268 @@ CONFIG_PRINTER=y
#
# Ftape, the floppy tape device driver
#
+# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
-CONFIG_AGP_INTEL=y
+# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
+CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_I810 is not set
-CONFIG_DRM_I830=y
+CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
+# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
#
# I2C support
#
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_ISA=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+CONFIG_I2C_VIAPRO=y
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+CONFIG_SENSORS_IT87=y
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BWQCAM is not set
+# CONFIG_VIDEO_CQCAM is not set
+# CONFIG_VIDEO_W9966 is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIDEO_SAA7134=y
+# CONFIG_VIDEO_SAA7134_ALSA is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+CONFIG_VIDEO_TUNER=y
+CONFIG_VIDEO_BUF=y
+CONFIG_VIDEO_IR=y
#
# Graphics support
#
-# CONFIG_FB is not set
-# CONFIG_VIDEO_SELECT is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VESA is not set
+CONFIG_VIDEO_SELECT=y
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -864,10 +1110,13 @@ CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_SEQUENCER_OSS is not set
+CONFIG_SND_RTCTIMER=y
+CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -875,81 +1124,66 @@ CONFIG_SND_SEQUENCER_OSS=y
# Generic devices
#
CONFIG_SND_MPU401_UART=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-#
-# ISA devices
-#
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_VIA82XX=y
+# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
#
-# ALSA USB devices
+# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
@@ -959,6 +1193,8 @@ CONFIG_SND_INTEL8X0=y
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -968,6 +1204,8 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
@@ -975,68 +1213,93 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
-# USB Human Interface Devices (HID)
+# USB Input Devices
#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
-CONFIG_USB_EGALAX=m
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_PWC is not set
#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
+# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1053,56 +1316,85 @@ CONFIG_USB_EGALAX=m
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
+#
+# USB DSL modem support
+#
+
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+# CONFIG_EDAC is not set
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -1111,12 +1403,12 @@ CONFIG_VFAT_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1138,38 +1430,48 @@ CONFIG_RAMFS=y
#
# Network File Systems
#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
#
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -1189,6 +1491,7 @@ CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -1199,31 +1502,33 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
#
-# Profiling support
+# Instrumentation Support
#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_FRAME_POINTER is not set
-CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -1231,14 +1536,19 @@ CONFIG_X86_MPPARSE=y
#
# CONFIG_CRYPTO is not set
+#
+# Hardware crypto devices
+#
+
#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_X86_SMP=y
-CONFIG_X86_HT=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
-CONFIG_X86_TRAMPOLINE=y
-CONFIG_X86_STD_RESOURCES=y
-CONFIG_PC=y
+CONFIG_KTIME_SCALAR=y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index a85ea9d37f05..ff7ae6b664e8 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -271,6 +271,25 @@ config SCHED_SMT
Intel IA64 chips with MultiThreading at a cost of slightly increased
overhead in some places. If unsure say N here.
+config PERMIT_BSP_REMOVE
+ bool "Support removal of Bootstrap Processor"
+ depends on HOTPLUG_CPU
+ default n
+ ---help---
+ Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU
+ support.
+
+config FORCE_CPEI_RETARGET
+ bool "Force assumption that CPEI can be re-targetted"
+ depends on PERMIT_BSP_REMOVE
+ default n
+ ---help---
+ Say Y if you need to force the assumption that CPEI can be re-targetted to
+ any cpu in the system. This hint is available via ACPI 3.0 specifications.
+ Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.
+ This option it useful to enable this feature on older BIOS's as well.
+ You can also enable this by using boot command line option force_cpei=1.
+
config PREEMPT
bool "Preemptible Kernel"
help
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 125568118b84..766bf4955432 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -116,6 +116,8 @@ CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_FORCE_CPEI_RETARGET=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index ecd44bdc8394..4722ec51c70c 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -284,19 +284,24 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header,
return 0;
}
+#ifdef CONFIG_HOTPLUG_CPU
unsigned int can_cpei_retarget(void)
{
extern int cpe_vector;
+ extern unsigned int force_cpei_retarget;
/*
* Only if CPEI is supported and the override flag
* is present, otherwise return that its re-targettable
* if we are in polling mode.
*/
- if (cpe_vector > 0 && !acpi_cpei_override)
- return 0;
- else
- return 1;
+ if (cpe_vector > 0) {
+ if (acpi_cpei_override || force_cpei_retarget)
+ return 1;
+ else
+ return 0;
+ }
+ return 1;
}
unsigned int is_cpu_cpei_target(unsigned int cpu)
@@ -315,6 +320,7 @@ void set_cpei_target_cpu(unsigned int cpu)
{
acpi_cpei_phys_cpuid = cpu_physical_id(cpu);
}
+#endif
unsigned int get_cpei_target_cpu(void)
{
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 930fdfca6ddb..0e3eda99e549 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1102,9 +1102,6 @@ skip_rbs_switch:
st8 [r2]=r8
st8 [r3]=r10
.work_pending:
- tbit.nz p6,p0=r31,TIF_SIGDELAYED // signal delayed from MCA/INIT/NMI/PMI context?
-(p6) br.cond.sptk.few .sigdelayed
- ;;
tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0?
(p6) br.cond.sptk.few .notify
#ifdef CONFIG_PREEMPT
@@ -1131,17 +1128,6 @@ skip_rbs_switch:
(pLvSys)br.cond.sptk.few .work_pending_syscall_end
br.cond.sptk.many .work_processed_kernel // don't re-check
-// There is a delayed signal that was detected in MCA/INIT/NMI/PMI context where
-// it could not be delivered. Deliver it now. The signal might be for us and
-// may set TIF_SIGPENDING, so redrive ia64_leave_* after processing the delayed
-// signal.
-
-.sigdelayed:
- br.call.sptk.many rp=do_sigdelayed
- cmp.eq p6,p0=r0,r0 // p6 <- 1, always re-check
-(pLvSys)br.cond.sptk.few .work_pending_syscall_end
- br.cond.sptk.many .work_processed_kernel // re-check
-
.work_pending_syscall_end:
adds r2=PT(R8)+16,r12
adds r3=PT(R10)+16,r12
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 574084f343fa..8832c553230a 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -631,6 +631,7 @@ get_target_cpu (unsigned int gsi, int vector)
{
#ifdef CONFIG_SMP
static int cpu = -1;
+ extern int cpe_vector;
/*
* In case of vector shared by multiple RTEs, all RTEs that
@@ -653,6 +654,11 @@ get_target_cpu (unsigned int gsi, int vector)
if (!cpu_online(smp_processor_id()))
return cpu_physical_id(smp_processor_id());
+#ifdef CONFIG_ACPI
+ if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR)
+ return get_cpei_target_cpu();
+#endif
+
#ifdef CONFIG_NUMA
{
int num_cpus, cpu_index, iosapic_index, numa_cpu, i = 0;
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index d33244c32759..5ce908ef9c95 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -163,8 +163,19 @@ void fixup_irqs(void)
{
unsigned int irq;
extern void ia64_process_pending_intr(void);
+ extern void ia64_disable_timer(void);
+ extern volatile int time_keeper_id;
+
+ ia64_disable_timer();
+
+ /*
+ * Find a new timesync master
+ */
+ if (smp_processor_id() == time_keeper_id) {
+ time_keeper_id = first_cpu(cpu_online_map);
+ printk ("CPU %d is now promoted to time-keeper master\n", time_keeper_id);
+ }
- ia64_set_itv(1<<16);
/*
* Phase 1: Locate irq's bound to this cpu and
* relocate them for cpu removal.
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index ee7eec9ee576..b57e723f194c 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -281,14 +281,10 @@ ia64_mca_log_sal_error_record(int sal_info_type)
ia64_sal_clear_state_info(sal_info_type);
}
-/*
- * platform dependent error handling
- */
-#ifndef PLATFORM_MCA_HANDLERS
-
#ifdef CONFIG_ACPI
int cpe_vector = -1;
+int ia64_cpe_irq = -1;
static irqreturn_t
ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs)
@@ -377,8 +373,6 @@ ia64_mca_register_cpev (int cpev)
}
#endif /* CONFIG_ACPI */
-#endif /* PLATFORM_MCA_HANDLERS */
-
/*
* ia64_mca_cmc_vector_setup
*
@@ -630,6 +624,32 @@ copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat)
*tnat |= (nat << tslot);
}
+/* Change the comm field on the MCA/INT task to include the pid that
+ * was interrupted, it makes for easier debugging. If that pid was 0
+ * (swapper or nested MCA/INIT) then use the start of the previous comm
+ * field suffixed with its cpu.
+ */
+
+static void
+ia64_mca_modify_comm(const task_t *previous_current)
+{
+ char *p, comm[sizeof(current->comm)];
+ if (previous_current->pid)
+ snprintf(comm, sizeof(comm), "%s %d",
+ current->comm, previous_current->pid);
+ else {
+ int l;
+ if ((p = strchr(previous_current->comm, ' ')))
+ l = p - previous_current->comm;
+ else
+ l = strlen(previous_current->comm);
+ snprintf(comm, sizeof(comm), "%s %*s %d",
+ current->comm, l, previous_current->comm,
+ task_thread_info(previous_current)->cpu);
+ }
+ memcpy(current->comm, comm, sizeof(current->comm));
+}
+
/* On entry to this routine, we are running on the per cpu stack, see
* mca_asm.h. The original stack has not been touched by this event. Some of
* the original stack's registers will be in the RBS on this stack. This stack
@@ -648,7 +668,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
struct ia64_sal_os_state *sos,
const char *type)
{
- char *p, comm[sizeof(current->comm)];
+ char *p;
ia64_va va;
extern char ia64_leave_kernel[]; /* Need asm address, not function descriptor */
const pal_min_state_area_t *ms = sos->pal_min_state;
@@ -721,6 +741,10 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
/* Verify the previous stack state before we change it */
if (user_mode(regs)) {
msg = "occurred in user space";
+ /* previous_current is guaranteed to be valid when the task was
+ * in user space, so ...
+ */
+ ia64_mca_modify_comm(previous_current);
goto no_mod;
}
if (r13 != sos->prev_IA64_KR_CURRENT) {
@@ -750,25 +774,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
goto no_mod;
}
- /* Change the comm field on the MCA/INT task to include the pid that
- * was interrupted, it makes for easier debugging. If that pid was 0
- * (swapper or nested MCA/INIT) then use the start of the previous comm
- * field suffixed with its cpu.
- */
- if (previous_current->pid)
- snprintf(comm, sizeof(comm), "%s %d",
- current->comm, previous_current->pid);
- else {
- int l;
- if ((p = strchr(previous_current->comm, ' ')))
- l = p - previous_current->comm;
- else
- l = strlen(previous_current->comm);
- snprintf(comm, sizeof(comm), "%s %*s %d",
- current->comm, l, previous_current->comm,
- task_thread_info(previous_current)->cpu);
- }
- memcpy(current->comm, comm, sizeof(current->comm));
+ ia64_mca_modify_comm(previous_current);
/* Make the original task look blocked. First stack a struct pt_regs,
* describing the state at the time of interrupt. mca_asm.S built a
@@ -908,7 +914,7 @@ no_mod:
static void
ia64_wait_for_slaves(int monarch)
{
- int c, wait = 0;
+ int c, wait = 0, missing = 0;
for_each_online_cpu(c) {
if (c == monarch)
continue;
@@ -919,15 +925,32 @@ ia64_wait_for_slaves(int monarch)
}
}
if (!wait)
- return;
+ goto all_in;
for_each_online_cpu(c) {
if (c == monarch)
continue;
if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) {
udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */
+ if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE)
+ missing = 1;
break;
}
}
+ if (!missing)
+ goto all_in;
+ printk(KERN_INFO "OS MCA slave did not rendezvous on cpu");
+ for_each_online_cpu(c) {
+ if (c == monarch)
+ continue;
+ if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE)
+ printk(" %d", c);
+ }
+ printk("\n");
+ return;
+
+all_in:
+ printk(KERN_INFO "All OS MCA slaves have reached rendezvous\n");
+ return;
}
/*
@@ -953,6 +976,10 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
task_t *previous_current;
oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */
+ console_loglevel = 15; /* make sure printks make it to console */
+ printk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d monarch=%ld\n",
+ sos->proc_state_param, cpu, sos->monarch);
+
previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA");
monarch_cpu = cpu;
if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0)
@@ -1444,11 +1471,13 @@ void __devinit
ia64_mca_cpu_init(void *cpu_data)
{
void *pal_vaddr;
+ static int first_time = 1;
- if (smp_processor_id() == 0) {
+ if (first_time) {
void *mca_data;
int cpu;
+ first_time = 0;
mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu)
* NR_CPUS + KERNEL_STACK_SIZE);
mca_data = (void *)(((unsigned long)mca_data +
@@ -1704,6 +1733,7 @@ ia64_mca_late_init(void)
desc = irq_descp(irq);
desc->status |= IRQ_PER_CPU;
setup_irq(irq, &mca_cpe_irqaction);
+ ia64_cpe_irq = irq;
}
ia64_mca_register_cpev(cpe_vector);
IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 9c5194b385da..077f21216b65 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -6722,6 +6722,7 @@ __initcall(pfm_init);
void
pfm_init_percpu (void)
{
+ static int first_time=1;
/*
* make sure no measurement is active
* (may inherit programmed PMCs from EFI).
@@ -6734,8 +6735,10 @@ pfm_init_percpu (void)
*/
pfm_unfreeze_pmu();
- if (smp_processor_id() == 0)
+ if (first_time) {
register_percpu_irq(IA64_PERFMON_VECTOR, &perfmon_irqaction);
+ first_time=0;
+ }
ia64_setreg(_IA64_REG_CR_PMV, IA64_PERFMON_VECTOR);
ia64_srlz_d();
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 463f6bb44d07..1d7903ee2126 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -588,104 +588,3 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall)
}
return 0;
}
-
-/* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it
- * could not be delivered. It is important that the target process is not
- * allowed to do any more work in user space. Possible cases for the target
- * process:
- *
- * - It is sleeping and will wake up soon. Store the data in the current task,
- * the signal will be sent when the current task returns from the next
- * interrupt.
- *
- * - It is running in user context. Store the data in the current task, the
- * signal will be sent when the current task returns from the next interrupt.
- *
- * - It is running in kernel context on this or another cpu and will return to
- * user context. Store the data in the target task, the signal will be sent
- * to itself when the target task returns to user space.
- *
- * - It is running in kernel context on this cpu and will sleep before
- * returning to user context. Because this is also the current task, the
- * signal will not get delivered and the task could sleep indefinitely.
- * Store the data in the idle task for this cpu, the signal will be sent
- * after the idle task processes its next interrupt.
- *
- * To cover all cases, store the data in the target task, the current task and
- * the idle task on this cpu. Whatever happens, the signal will be delivered
- * to the target task before it can do any useful user space work. Multiple
- * deliveries have no unwanted side effects.
- *
- * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts
- * disabled. It must not take any locks nor use kernel structures or services
- * that require locks.
- */
-
-/* To ensure that we get the right pid, check its start time. To avoid extra
- * include files in thread_info.h, convert the task start_time to unsigned long,
- * giving us a cycle time of > 580 years.
- */
-static inline unsigned long
-start_time_ul(const struct task_struct *t)
-{
- return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec;
-}
-
-void
-set_sigdelayed(pid_t pid, int signo, int code, void __user *addr)
-{
- struct task_struct *t;
- unsigned long start_time = 0;
- int i;
-
- for (i = 1; i <= 3; ++i) {
- switch (i) {
- case 1:
- t = find_task_by_pid(pid);
- if (t)
- start_time = start_time_ul(t);
- break;
- case 2:
- t = current;
- break;
- default:
- t = idle_task(smp_processor_id());
- break;
- }
-
- if (!t)
- return;
- task_thread_info(t)->sigdelayed.signo = signo;
- task_thread_info(t)->sigdelayed.code = code;
- task_thread_info(t)->sigdelayed.addr = addr;
- task_thread_info(t)->sigdelayed.start_time = start_time;
- task_thread_info(t)->sigdelayed.pid = pid;
- wmb();
- set_tsk_thread_flag(t, TIF_SIGDELAYED);
- }
-}
-
-/* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that
- * was detected in MCA/INIT/NMI/PMI context where it could not be delivered.
- */
-
-void
-do_sigdelayed(void)
-{
- struct siginfo siginfo;
- pid_t pid;
- struct task_struct *t;
-
- clear_thread_flag(TIF_SIGDELAYED);
- memset(&siginfo, 0, sizeof(siginfo));
- siginfo.si_signo = current_thread_info()->sigdelayed.signo;
- siginfo.si_code = current_thread_info()->sigdelayed.code;
- siginfo.si_addr = current_thread_info()->sigdelayed.addr;
- pid = current_thread_info()->sigdelayed.pid;
- t = find_task_by_pid(pid);
- if (!t)
- return;
- if (current_thread_info()->sigdelayed.start_time != start_time_ul(t))
- return;
- force_sig_info(siginfo.si_signo, &siginfo, t);
-}
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index b681ef34a86e..c4b633b36dab 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -70,6 +70,12 @@
#endif
#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_PERMIT_BSP_REMOVE
+#define bsp_remove_ok 1
+#else
+#define bsp_remove_ok 0
+#endif
+
/*
* Store all idle threads, this can be reused instead of creating
* a new thread. Also avoids complicated thread destroy functionality
@@ -104,7 +110,7 @@ struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0];
/*
* ITC synchronization related stuff:
*/
-#define MASTER 0
+#define MASTER (0)
#define SLAVE (SMP_CACHE_BYTES/8)
#define NUM_ROUNDS 64 /* magic value */
@@ -151,6 +157,27 @@ char __initdata no_int_routing;
unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */
+#ifdef CONFIG_FORCE_CPEI_RETARGET
+#define CPEI_OVERRIDE_DEFAULT (1)
+#else
+#define CPEI_OVERRIDE_DEFAULT (0)
+#endif
+
+unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT;
+
+static int __init
+cmdl_force_cpei(char *str)
+{
+ int value=0;
+
+ get_option (&str, &value);
+ force_cpei_retarget = value;
+
+ return 1;
+}
+
+__setup("force_cpei=", cmdl_force_cpei);
+
static int __init
nointroute (char *str)
{
@@ -161,6 +188,27 @@ nointroute (char *str)
__setup("nointroute", nointroute);
+static void fix_b0_for_bsp(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ int cpuid;
+ static int fix_bsp_b0 = 1;
+
+ cpuid = smp_processor_id();
+
+ /*
+ * Cache the b0 value on the first AP that comes up
+ */
+ if (!(fix_bsp_b0 && cpuid))
+ return;
+
+ sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0];
+ printk ("Fixed BSP b0 value from CPU %d\n", cpuid);
+
+ fix_bsp_b0 = 0;
+#endif
+}
+
void
sync_master (void *arg)
{
@@ -327,8 +375,9 @@ smp_setup_percpu_timer (void)
static void __devinit
smp_callin (void)
{
- int cpuid, phys_id;
+ int cpuid, phys_id, itc_master;
extern void ia64_init_itm(void);
+ extern volatile int time_keeper_id;
#ifdef CONFIG_PERFMON
extern void pfm_init_percpu(void);
@@ -336,6 +385,7 @@ smp_callin (void)
cpuid = smp_processor_id();
phys_id = hard_smp_processor_id();
+ itc_master = time_keeper_id;
if (cpu_online(cpuid)) {
printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n",
@@ -343,6 +393,8 @@ smp_callin (void)
BUG();
}
+ fix_b0_for_bsp();
+
lock_ipi_calllock();
cpu_set(cpuid, cpu_online_map);
unlock_ipi_calllock();
@@ -365,8 +417,8 @@ smp_callin (void)
* calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls
* local_bh_enable(), which bugs out if irqs are not enabled...
*/
- Dprintk("Going to syncup ITC with BP.\n");
- ia64_sync_itc(0);
+ Dprintk("Going to syncup ITC with ITC Master.\n");
+ ia64_sync_itc(itc_master);
}
/*
@@ -635,6 +687,47 @@ remove_siblinginfo(int cpu)
}
extern void fixup_irqs(void);
+
+int migrate_platform_irqs(unsigned int cpu)
+{
+ int new_cpei_cpu;
+ irq_desc_t *desc = NULL;
+ cpumask_t mask;
+ int retval = 0;
+
+ /*
+ * dont permit CPEI target to removed.
+ */
+ if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) {
+ printk ("CPU (%d) is CPEI Target\n", cpu);
+ if (can_cpei_retarget()) {
+ /*
+ * Now re-target the CPEI to a different processor
+ */
+ new_cpei_cpu = any_online_cpu(cpu_online_map);
+ mask = cpumask_of_cpu(new_cpei_cpu);
+ set_cpei_target_cpu(new_cpei_cpu);
+ desc = irq_descp(ia64_cpe_irq);
+ /*
+ * Switch for now, immediatly, we need to do fake intr
+ * as other interrupts, but need to study CPEI behaviour with
+ * polling before making changes.
+ */
+ if (desc) {
+ desc->handler->disable(ia64_cpe_irq);
+ desc->handler->set_affinity(ia64_cpe_irq, mask);
+ desc->handler->enable(ia64_cpe_irq);
+ printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu);
+ }
+ }
+ if (!desc) {
+ printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu);
+ retval = -EBUSY;
+ }
+ }
+ return retval;
+}
+
/* must be called with cpucontrol mutex held */
int __cpu_disable(void)
{
@@ -643,8 +736,17 @@ int __cpu_disable(void)
/*
* dont permit boot processor for now
*/
- if (cpu == 0)
- return -EBUSY;
+ if (cpu == 0 && !bsp_remove_ok) {
+ printk ("Your platform does not support removal of BSP\n");
+ return (-EBUSY);
+ }
+
+ cpu_clear(cpu, cpu_online_map);
+
+ if (migrate_platform_irqs(cpu)) {
+ cpu_set(cpu, cpu_online_map);
+ return (-EBUSY);
+ }
remove_siblinginfo(cpu);
cpu_clear(cpu, cpu_online_map);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 307d01e15b2e..ac167436e936 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -32,7 +32,7 @@
extern unsigned long wall_jiffies;
-#define TIME_KEEPER_ID 0 /* smp_processor_id() of time-keeper */
+volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */
#ifdef CONFIG_IA64_DEBUG_IRQ
@@ -71,7 +71,7 @@ timer_interrupt (int irq, void *dev_id, struct pt_regs *regs)
new_itm += local_cpu_data->itm_delta;
- if (smp_processor_id() == TIME_KEEPER_ID) {
+ if (smp_processor_id() == time_keeper_id) {
/*
* Here we are in the timer irq handler. We have irqs locally
* disabled, but we don't know if the timer_bh is running on
@@ -236,6 +236,11 @@ static struct irqaction timer_irqaction = {
.name = "timer"
};
+void __devinit ia64_disable_timer(void)
+{
+ ia64_set_itv(1 << 16);
+}
+
void __init
time_init (void)
{
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 6e5eea19fa67..3b6fd798c4d6 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -36,7 +36,7 @@ int arch_register_cpu(int num)
parent = &sysfs_nodes[cpu_to_node(num)];
#endif /* CONFIG_NUMA */
-#ifdef CONFIG_ACPI
+#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU)
/*
* If CPEI cannot be re-targetted, and this is
* CPEI target, then dont create the control file
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index acaaec4e4681..9855ba318094 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -181,13 +181,15 @@ per_cpu_init (void)
{
void *cpu_data;
int cpu;
+ static int first_time=1;
/*
* get_free_pages() cannot be used before cpu_init() done. BSP
* allocates "NR_CPUS" pages for all CPUs to avoid that AP calls
* get_zeroed_page().
*/
- if (smp_processor_id() == 0) {
+ if (first_time) {
+ first_time=0;
cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
for (cpu = 0; cpu < NR_CPUS; cpu++) {
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index c87d6d1d5813..573d5cc63e2b 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -528,12 +528,17 @@ void __init find_memory(void)
void *per_cpu_init(void)
{
int cpu;
+ static int first_time = 1;
+
if (smp_processor_id() != 0)
return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
- for (cpu = 0; cpu < NR_CPUS; cpu++)
- per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
+ if (first_time) {
+ first_time = 0;
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
+ per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
+ }
return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
}
diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile
index 3e9b4eea7418..ab9c48c88012 100644
--- a/arch/ia64/sn/kernel/Makefile
+++ b/arch/ia64/sn/kernel/Makefile
@@ -10,7 +10,8 @@
CPPFLAGS += -I$(srctree)/arch/ia64/sn/include
obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \
- huberror.o io_init.o iomv.o klconflib.o sn2/
+ huberror.o io_init.o iomv.o klconflib.o pio_phys.o \
+ sn2/
obj-$(CONFIG_IA64_GENERIC) += machvec.o
obj-$(CONFIG_SGI_TIOCX) += tiocx.o
obj-$(CONFIG_IA64_SGI_SN_XP) += xp.o
diff --git a/arch/ia64/sn/kernel/pio_phys.S b/arch/ia64/sn/kernel/pio_phys.S
new file mode 100644
index 000000000000..3c7d48d6ecb8
--- /dev/null
+++ b/arch/ia64/sn/kernel/pio_phys.S
@@ -0,0 +1,71 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This file contains macros used to access MMR registers via
+ * uncached physical addresses.
+ * pio_phys_read_mmr - read an MMR
+ * pio_phys_write_mmr - write an MMR
+ * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
+ * Second MMR will be skipped if address is NULL
+ *
+ * Addresses passed to these routines should be uncached physical addresses
+ * ie., 0x80000....
+ */
+
+
+
+#include
+#include
+
+GLOBAL_ENTRY(pio_phys_read_mmr)
+ .prologue
+ .regstk 1,0,0,0
+ .body
+ mov r2=psr
+ rsm psr.i | psr.dt
+ ;;
+ srlz.d
+ ld8.acq r8=[r32]
+ ;;
+ mov psr.l=r2;;
+ srlz.d
+ br.ret.sptk.many rp
+END(pio_phys_read_mmr)
+
+GLOBAL_ENTRY(pio_phys_write_mmr)
+ .prologue
+ .regstk 2,0,0,0
+ .body
+ mov r2=psr
+ rsm psr.i | psr.dt
+ ;;
+ srlz.d
+ st8.rel [r32]=r33
+ ;;
+ mov psr.l=r2;;
+ srlz.d
+ br.ret.sptk.many rp
+END(pio_phys_write_mmr)
+
+GLOBAL_ENTRY(pio_atomic_phys_write_mmrs)
+ .prologue
+ .regstk 4,0,0,0
+ .body
+ mov r2=psr
+ cmp.ne p9,p0=r34,r0;
+ rsm psr.i | psr.dt | psr.ic
+ ;;
+ srlz.d
+ st8.rel [r32]=r33
+(p9) st8.rel [r34]=r35
+ ;;
+ mov psr.l=r2;;
+ srlz.d
+ br.ret.sptk.many rp
+END(pio_atomic_phys_write_mmrs)
+
+
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 5b84836c2171..8b6d5c844708 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved.
*/
#include
@@ -498,6 +498,7 @@ void __init sn_setup(char **cmdline_p)
* for sn.
*/
pm_power_off = ia64_sn_power_down;
+ current->thread.flags |= IA64_THREAD_MIGRATION;
}
/**
@@ -660,7 +661,8 @@ void __init sn_cpu_init(void)
SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3};
u64 *pio;
pio = is_shub1() ? pio1 : pio2;
- pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]);
+ pda->pio_write_status_addr =
+ (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]);
pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0;
}
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index b2e1e746b47f..d9d306c79f2d 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -93,6 +93,27 @@ static inline unsigned long wait_piowc(void)
return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0;
}
+/**
+ * sn_migrate - SN-specific task migration actions
+ * @task: Task being migrated to new CPU
+ *
+ * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order.
+ * Context switching user threads which have memory-mapped MMIO may cause
+ * PIOs to issue from seperate CPUs, thus the PIO writes must be drained
+ * from the previous CPU's Shub before execution resumes on the new CPU.
+ */
+void sn_migrate(struct task_struct *task)
+{
+ pda_t *last_pda = pdacpu(task_thread_info(task)->last_cpu);
+ volatile unsigned long *adr = last_pda->pio_write_status_addr;
+ unsigned long val = last_pda->pio_write_status_val;
+
+ /* Drain PIO writes from old CPU's Shub */
+ while (unlikely((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK)
+ != val))
+ cpu_relax();
+}
+
void sn_tlb_migrate_finish(struct mm_struct *mm)
{
/* flush_tlb_mm is inefficient if more than 1 users of mm */
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index cdf6856ce089..d0abddd9ffe6 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -21,7 +21,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -29,6 +28,31 @@
#include
+/*
+ * Guarantee that the kzalloc'd memory is cacheline aligned.
+ */
+static void *
+xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+ /* see if kzalloc will give us cachline aligned memory by default */
+ *base = kzalloc(size, flags);
+ if (*base == NULL) {
+ return NULL;
+ }
+ if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) {
+ return *base;
+ }
+ kfree(*base);
+
+ /* nope, we'll have to do it ourselves */
+ *base = kzalloc(size + L1_CACHE_BYTES, flags);
+ if (*base == NULL) {
+ return NULL;
+ }
+ return (void *) L1_CACHE_ALIGN((u64) *base);
+}
+
+
/*
* Set up the initial values for the XPartition Communication channels.
*/
@@ -93,20 +117,19 @@ xpc_setup_infrastructure(struct xpc_partition *part)
* Allocate all of the channel structures as a contiguous chunk of
* memory.
*/
- part->channels = kmalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
+ part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
GFP_KERNEL);
if (part->channels == NULL) {
dev_err(xpc_chan, "can't get memory for channels\n");
return xpcNoMemory;
}
- memset(part->channels, 0, sizeof(struct xpc_channel) * XPC_NCHANNELS);
part->nchannels = XPC_NCHANNELS;
/* allocate all the required GET/PUT values */
- part->local_GPs = xpc_kmalloc_cacheline_aligned(XPC_GP_SIZE,
+ part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
GFP_KERNEL, &part->local_GPs_base);
if (part->local_GPs == NULL) {
kfree(part->channels);
@@ -115,55 +138,51 @@ xpc_setup_infrastructure(struct xpc_partition *part)
"values\n");
return xpcNoMemory;
}
- memset(part->local_GPs, 0, XPC_GP_SIZE);
- part->remote_GPs = xpc_kmalloc_cacheline_aligned(XPC_GP_SIZE,
+ part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
GFP_KERNEL, &part->remote_GPs_base);
if (part->remote_GPs == NULL) {
- kfree(part->channels);
- part->channels = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
dev_err(xpc_chan, "can't get memory for remote get/put "
"values\n");
+ kfree(part->local_GPs_base);
+ part->local_GPs = NULL;
+ kfree(part->channels);
+ part->channels = NULL;
return xpcNoMemory;
}
- memset(part->remote_GPs, 0, XPC_GP_SIZE);
/* allocate all the required open and close args */
- part->local_openclose_args = xpc_kmalloc_cacheline_aligned(
+ part->local_openclose_args = xpc_kzalloc_cacheline_aligned(
XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
&part->local_openclose_args_base);
if (part->local_openclose_args == NULL) {
- kfree(part->channels);
- part->channels = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
+ dev_err(xpc_chan, "can't get memory for local connect args\n");
kfree(part->remote_GPs_base);
part->remote_GPs = NULL;
- dev_err(xpc_chan, "can't get memory for local connect args\n");
+ kfree(part->local_GPs_base);
+ part->local_GPs = NULL;
+ kfree(part->channels);
+ part->channels = NULL;
return xpcNoMemory;
}
- memset(part->local_openclose_args, 0, XPC_OPENCLOSE_ARGS_SIZE);
- part->remote_openclose_args = xpc_kmalloc_cacheline_aligned(
+ part->remote_openclose_args = xpc_kzalloc_cacheline_aligned(
XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
&part->remote_openclose_args_base);
if (part->remote_openclose_args == NULL) {
- kfree(part->channels);
- part->channels = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
- kfree(part->remote_GPs_base);
- part->remote_GPs = NULL;
+ dev_err(xpc_chan, "can't get memory for remote connect args\n");
kfree(part->local_openclose_args_base);
part->local_openclose_args = NULL;
- dev_err(xpc_chan, "can't get memory for remote connect args\n");
+ kfree(part->remote_GPs_base);
+ part->remote_GPs = NULL;
+ kfree(part->local_GPs_base);
+ part->local_GPs = NULL;
+ kfree(part->channels);
+ part->channels = NULL;
return xpcNoMemory;
}
- memset(part->remote_openclose_args, 0, XPC_OPENCLOSE_ARGS_SIZE);
xpc_initialize_channels(part, partid);
@@ -186,18 +205,18 @@ xpc_setup_infrastructure(struct xpc_partition *part)
ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, SA_SHIRQ,
part->IPI_owner, (void *) (u64) partid);
if (ret != 0) {
- kfree(part->channels);
- part->channels = NULL;
- kfree(part->local_GPs_base);
- part->local_GPs = NULL;
- kfree(part->remote_GPs_base);
- part->remote_GPs = NULL;
- kfree(part->local_openclose_args_base);
- part->local_openclose_args = NULL;
- kfree(part->remote_openclose_args_base);
- part->remote_openclose_args = NULL;
dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
"errno=%d\n", -ret);
+ kfree(part->remote_openclose_args_base);
+ part->remote_openclose_args = NULL;
+ kfree(part->local_openclose_args_base);
+ part->local_openclose_args = NULL;
+ kfree(part->remote_GPs_base);
+ part->remote_GPs = NULL;
+ kfree(part->local_GPs_base);
+ part->local_GPs = NULL;
+ kfree(part->channels);
+ part->channels = NULL;
return xpcLackOfResources;
}
@@ -446,22 +465,20 @@ xpc_allocate_local_msgqueue(struct xpc_channel *ch)
for (nentries = ch->local_nentries; nentries > 0; nentries--) {
nbytes = nentries * ch->msg_size;
- ch->local_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
+ ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
GFP_KERNEL,
&ch->local_msgqueue_base);
if (ch->local_msgqueue == NULL) {
continue;
}
- memset(ch->local_msgqueue, 0, nbytes);
nbytes = nentries * sizeof(struct xpc_notify);
- ch->notify_queue = kmalloc(nbytes, GFP_KERNEL);
+ ch->notify_queue = kzalloc(nbytes, GFP_KERNEL);
if (ch->notify_queue == NULL) {
kfree(ch->local_msgqueue_base);
ch->local_msgqueue = NULL;
continue;
}
- memset(ch->notify_queue, 0, nbytes);
spin_lock_irqsave(&ch->lock, irq_flags);
if (nentries < ch->local_nentries) {
@@ -501,13 +518,12 @@ xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
nbytes = nentries * ch->msg_size;
- ch->remote_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
+ ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
GFP_KERNEL,
&ch->remote_msgqueue_base);
if (ch->remote_msgqueue == NULL) {
continue;
}
- memset(ch->remote_msgqueue, 0, nbytes);
spin_lock_irqsave(&ch->lock, irq_flags);
if (nentries < ch->remote_nentries) {
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index 8cbf16432570..99b123a6421a 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -52,7 +52,6 @@
#include
#include
#include
-#include
#include
#include
#include
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 88a730e6cfdb..94211429fd0c 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -80,6 +80,31 @@ char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
XP_NASID_MASK_BYTES];
+/*
+ * Guarantee that the kmalloc'd memory is cacheline aligned.
+ */
+static void *
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+ /* see if kmalloc will give us cachline aligned memory by default */
+ *base = kmalloc(size, flags);
+ if (*base == NULL) {
+ return NULL;
+ }
+ if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) {
+ return *base;
+ }
+ kfree(*base);
+
+ /* nope, we'll have to do it ourselves */
+ *base = kmalloc(size + L1_CACHE_BYTES, flags);
+ if (*base == NULL) {
+ return NULL;
+ }
+ return (void *) L1_CACHE_ALIGN((u64) *base);
+}
+
+
/*
* Given a nasid, get the physical address of the partition's reserved page
* for that nasid. This function returns 0 on any error.
@@ -1038,13 +1063,12 @@ xpc_discovery(void)
remote_vars = (struct xpc_vars *) remote_rp;
- discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words,
+ discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words,
GFP_KERNEL);
if (discovered_nasids == NULL) {
kfree(remote_rp_base);
return;
}
- memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words);
rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index e52831ed93eb..fa073cc4b565 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -15,6 +15,124 @@
#include
#include
#include
+#include
+
+/*
+ * 1/26/2006
+ *
+ * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe
+ * (taken from the above PV) before and after accessing tioce internal MMR's
+ * to avoid tioce lockups.
+ *
+ * The recipe as taken from the PV:
+ *
+ * if(mmr address < 0x45000) {
+ * if(mmr address == 0 or 0x80)
+ * mmr wrt or read address 0xc0
+ * else if(mmr address == 0x148 or 0x200)
+ * mmr wrt or read address 0x28
+ * else
+ * mmr wrt or read address 0x158
+ *
+ * do desired mmr access (rd or wrt)
+ *
+ * if(mmr address == 0x100)
+ * mmr wrt or read address 0x38
+ * mmr wrt or read address 0xb050
+ * } else
+ * do desired mmr access
+ *
+ * According to hw, we can use reads instead of writes to the above addres
+ *
+ * Note this WAR can only to be used for accessing internal MMR's in the
+ * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the
+ * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
+ * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
+ *
+ * All registers defined in struct tioce will meet that criteria.
+ */
+
+static void inline
+tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr)
+{
+ u64 mmr_base;
+ u64 mmr_offset;
+
+ if (kern->ce_common->ce_rev != TIOCE_REV_A)
+ return;
+
+ mmr_base = kern->ce_common->ce_pcibus.bs_base;
+ mmr_offset = (u64)mmr_addr - mmr_base;
+
+ if (mmr_offset < 0x45000) {
+ u64 mmr_war_offset;
+
+ if (mmr_offset == 0 || mmr_offset == 0x80)
+ mmr_war_offset = 0xc0;
+ else if (mmr_offset == 0x148 || mmr_offset == 0x200)
+ mmr_war_offset = 0x28;
+ else
+ mmr_war_offset = 0x158;
+
+ readq_relaxed((void *)(mmr_base + mmr_war_offset));
+ }
+}
+
+static void inline
+tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr)
+{
+ u64 mmr_base;
+ u64 mmr_offset;
+
+ if (kern->ce_common->ce_rev != TIOCE_REV_A)
+ return;
+
+ mmr_base = kern->ce_common->ce_pcibus.bs_base;
+ mmr_offset = (u64)mmr_addr - mmr_base;
+
+ if (mmr_offset < 0x45000) {
+ if (mmr_offset == 0x100)
+ readq_relaxed((void *)(mmr_base + 0x38));
+ readq_relaxed((void *)(mmr_base + 0xb050));
+ }
+}
+
+/* load mmr contents into a variable */
+#define tioce_mmr_load(kern, mmrp, varp) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ *(varp) = readq_relaxed(mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store variable contents into mmr */
+#define tioce_mmr_store(kern, mmrp, varp) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ writeq(*varp, mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store immediate value into mmr */
+#define tioce_mmr_storei(kern, mmrp, val) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ writeq(val, mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* set bits (immediate value) into mmr */
+#define tioce_mmr_seti(kern, mmrp, bits) do {\
+ u64 tmp; \
+ tioce_mmr_load(kern, mmrp, &tmp); \
+ tmp |= (bits); \
+ tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
+
+/* clear bits (immediate value) into mmr */
+#define tioce_mmr_clri(kern, mmrp, bits) do { \
+ u64 tmp; \
+ tioce_mmr_load(kern, mmrp, &tmp); \
+ tmp &= ~(bits); \
+ tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
/**
* Bus address ranges for the 5 flavors of TIOCE DMA
@@ -62,9 +180,9 @@
#define TIOCE_ATE_M40 2
#define TIOCE_ATE_M40S 3
-#define KB(x) ((x) << 10)
-#define MB(x) ((x) << 20)
-#define GB(x) ((x) << 30)
+#define KB(x) ((u64)(x) << 10)
+#define MB(x) ((u64)(x) << 20)
+#define GB(x) ((u64)(x) << 30)
/**
* tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
@@ -151,7 +269,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
int last;
int entries;
int nates;
- int pagesize;
+ u64 pagesize;
u64 *ate_shadow;
u64 *ate_reg;
u64 addr;
@@ -228,7 +346,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
ate = ATE_MAKE(addr, pagesize);
ate_shadow[i + j] = ate;
- writeq(ate, &ate_reg[i + j]);
+ tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate);
addr += pagesize;
}
@@ -272,7 +390,8 @@ tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr)
u64 tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
- writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+ ct_upper);
tmp = ce_mmr->ce_ure_dir_map[port];
dma_ok = 1;
} else
@@ -344,7 +463,8 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
if (TIOCE_D32_ADDR(bus_addr)) {
if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
ce_kern->ce_port[port].dirmap_shadow = 0;
- writeq(0, &ce_mmr->ce_ure_dir_map[port]);
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+ 0);
}
} else {
struct tioce_dmamap *map;
@@ -365,7 +485,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
} else if (--map->refcnt == 0) {
for (i = 0; i < map->ate_count; i++) {
map->ate_shadow[i] = 0;
- map->ate_hw[i] = 0;
+ tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0);
}
list_del(&map->ce_dmamap_list);
@@ -486,7 +606,7 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
dma_map_done:
- if (mapaddr & barrier)
+ if (mapaddr && barrier)
mapaddr = tioce_dma_barrier(mapaddr, 1);
return mapaddr;
@@ -541,17 +661,61 @@ tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
soft->ce_pcibus.bs_persist_segment,
soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
+ if (ret_stuff.v0)
+ panic("tioce_error_intr_handler: Fatal TIOCE error");
+
return IRQ_HANDLED;
}
+/**
+ * tioce_reserve_m32 - reserve M32 ate's for the indicated address range
+ * @tioce_kernel: TIOCE context to reserve ate's for
+ * @base: starting bus address to reserve
+ * @limit: last bus address to reserve
+ *
+ * If base/limit falls within the range of bus space mapped through the
+ * M32 space, reserve the resources corresponding to the range.
+ */
+static void
+tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
+{
+ int ate_index, last_ate, ps;
+ struct tioce *ce_mmr;
+
+ if (!TIOCE_M32_ADDR(base))
+ return;
+
+ ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
+ ps = ce_kern->ce_ate3240_pagesize;
+ ate_index = ATE_PAGE(base, ps);
+ last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1;
+
+ if (ate_index < 64)
+ ate_index = 64;
+
+ while (ate_index <= last_ate) {
+ u64 ate;
+
+ ate = ATE_MAKE(0xdeadbeef, ps);
+ ce_kern->ce_ate3240_shadow[ate_index] = ate;
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
+ ate);
+ ate_index++;
+ }
+}
+
/**
* tioce_kern_init - init kernel structures related to a given TIOCE
* @tioce_common: ptr to a cached tioce_common struct that originated in prom
- */ static struct tioce_kernel *
+ */
+static struct tioce_kernel *
tioce_kern_init(struct tioce_common *tioce_common)
{
int i;
+ int ps;
+ int dev;
u32 tmp;
+ unsigned int seg, bus;
struct tioce *tioce_mmr;
struct tioce_kernel *tioce_kern;
@@ -572,9 +736,10 @@ tioce_kern_init(struct tioce_common *tioce_common)
* here to use pci_read_config_xxx() so use the raw_pci_ops vector.
*/
- raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment,
- tioce_common->ce_pcibus.bs_persist_busnum,
- PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp);
+ seg = tioce_common->ce_pcibus.bs_persist_segment;
+ bus = tioce_common->ce_pcibus.bs_persist_busnum;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp);
tioce_kern->ce_port1_secondary = (u8) tmp;
/*
@@ -583,18 +748,76 @@ tioce_kern_init(struct tioce_common *tioce_common)
*/
tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
- __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
- __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
- tioce_kern->ce_ate3240_pagesize = KB(256);
+ tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map,
+ CE_URE_PAGESIZE_MASK);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map,
+ CE_URE_256K_PAGESIZE);
+ ps = tioce_kern->ce_ate3240_pagesize = KB(256);
for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
tioce_kern->ce_ate40_shadow[i] = 0;
- writeq(0, &tioce_mmr->ce_ure_ate40[i]);
+ tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0);
}
for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
tioce_kern->ce_ate3240_shadow[i] = 0;
- writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
+ tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0);
+ }
+
+ /*
+ * Reserve ATE's corresponding to reserved address ranges. These
+ * include:
+ *
+ * Memory space covered by each PPB mem base/limit register
+ * Memory space covered by each PPB prefetch base/limit register
+ *
+ * These bus ranges are for pio (downstream) traffic only, and so
+ * cannot be used for DMA.
+ */
+
+ for (dev = 1; dev <= 2; dev++) {
+ u64 base, limit;
+
+ /* mem base/limit */
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_MEMORY_BASE, 2, &tmp);
+ base = (u64)tmp << 16;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_MEMORY_LIMIT, 2, &tmp);
+ limit = (u64)tmp << 16;
+ limit |= 0xfffffUL;
+
+ if (base < limit)
+ tioce_reserve_m32(tioce_kern, base, limit);
+
+ /*
+ * prefetch mem base/limit. The tioce ppb's have 64-bit
+ * decoders, so read the upper portions w/o checking the
+ * attributes.
+ */
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_MEMORY_BASE, 2, &tmp);
+ base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_BASE_UPPER32, 4, &tmp);
+ base |= (u64)tmp << 32;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_MEMORY_LIMIT, 2, &tmp);
+
+ limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+ limit |= 0xfffffUL;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_LIMIT_UPPER32, 4, &tmp);
+ limit |= (u64)tmp << 32;
+
+ if ((base < limit) && TIOCE_M32_ADDR(base))
+ tioce_reserve_m32(tioce_kern, base, limit);
}
return tioce_kern;
@@ -614,6 +837,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
{
struct pcidev_info *pcidev_info;
struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kern;
struct tioce *ce_mmr;
u64 force_int_val;
@@ -629,6 +853,29 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+ ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+ /*
+ * TIOCE Rev A workaround (PV 945826), force an interrupt by writing
+ * the TIO_INTx register directly (1/26/2006)
+ */
+ if (ce_common->ce_rev == TIOCE_REV_A) {
+ u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit);
+ u64 status;
+
+ tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status);
+ if (status & int_bit_mask) {
+ u64 force_irq = (1 << 8) | sn_irq_info->irq_irq;
+ u64 ctalk = sn_irq_info->irq_xtalkaddr;
+ u64 nasid, offset;
+
+ nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT;
+ offset = (ctalk & CTALK_NODE_OFFSET);
+ HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq);
+ }
+
+ return;
+ }
/*
* irq_int_bit is originally set up by prom, and holds the interrupt
@@ -666,7 +913,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
default:
return;
}
- writeq(force_int_val, &ce_mmr->ce_adm_force_int);
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val);
}
/**
@@ -685,6 +932,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
{
struct pcidev_info *pcidev_info;
struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kern;
struct tioce *ce_mmr;
int bit;
u64 vector;
@@ -695,14 +943,15 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+ ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
bit = sn_irq_info->irq_int_bit;
- __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+ tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
vector |= sn_irq_info->irq_xtalkaddr;
- writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
- __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector);
+ tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
tioce_force_interrupt(sn_irq_info);
}
@@ -721,7 +970,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
static void *
tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
{
+ int my_nasid;
+ cnodeid_t my_cnode, mem_cnode;
struct tioce_common *tioce_common;
+ struct tioce_kernel *tioce_kern;
+ struct tioce *tioce_mmr;
/*
* Allocate kernel bus soft and copy from prom.
@@ -734,11 +987,23 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET;
- if (tioce_kern_init(tioce_common) == NULL) {
+ tioce_kern = tioce_kern_init(tioce_common);
+ if (tioce_kern == NULL) {
kfree(tioce_common);
return NULL;
}
+ /*
+ * Clear out any transient errors before registering the error
+ * interrupt handler.
+ */
+
+ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias,
+ ~0ULL);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, ~0ULL);
+
if (request_irq(SGI_PCIASIC_ERROR,
tioce_error_intr_handler,
SA_SHIRQ, "TIOCE error", (void *)tioce_common))
@@ -750,6 +1015,21 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
tioce_common->ce_pcibus.bs_persist_segment,
tioce_common->ce_pcibus.bs_persist_busnum);
+ /*
+ * identify closest nasid for memory allocations
+ */
+
+ my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base);
+ my_cnode = nasid_to_cnodeid(my_nasid);
+
+ if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) {
+ printk(KERN_WARNING "tioce_bus_fixup: failed to find "
+ "closest node with MEM to TIO node %d\n", my_cnode);
+ mem_cnode = (cnodeid_t)-1; /* use any node */
+ }
+
+ controller->node = mem_cnode;
+
return tioce_common;
}
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index ac9de2661c0b..a331cc90797c 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -269,6 +269,11 @@ SECTIONS {
*(__ksymtab_gpl)
__stop___ksymtab_gpl = .;
+ /* Kernel symbol table: GPL-future symbols */
+ __start___ksymtab_gpl_future = .;
+ *(__ksymtab_gpl_future)
+ __stop___ksymtab_gpl_future = .;
+
/* Kernel symbol table: Normal symbols */
__start___kcrctab = .;
*(__kcrctab)
@@ -279,6 +284,11 @@ SECTIONS {
*(__kcrctab_gpl)
__stop___kcrctab_gpl = .;
+ /* Kernel symbol table: GPL-future symbols */
+ __start___kcrctab_gpl_future = .;
+ *(__kcrctab_gpl_future)
+ __stop___kcrctab_gpl_future = .;
+
/* Kernel symbol table: strings */
*(__ksymtab_strings)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3a0f89d2c8dc..ac2012f033d6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -602,7 +602,7 @@ config SGI_IP32
If you want this kernel to run on SGI O2 workstation, say Y here.
config SIBYTE_BIGSUR
- bool "Support for Sibyte BigSur"
+ bool "Support for Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
select PCI_DOMAINS
@@ -790,6 +790,7 @@ source "arch/mips/tx4927/Kconfig"
source "arch/mips/tx4938/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/philips/pnx8550/common/Kconfig"
+source "arch/mips/cobalt/Kconfig"
endmenu
@@ -1159,6 +1160,7 @@ config CPU_R4X00
config CPU_TX49XX
bool "R49XX"
depends on SYS_HAS_CPU_TX49XX
+ select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
@@ -1581,7 +1583,7 @@ source "mm/Kconfig"
config SMP
bool "Multi-Processing support"
- depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
+ depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 3d8dac681c63..9a69e0f0ab76 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -12,10 +12,6 @@
# for "archclean" cleaning up for this architecture.
#
-as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
- -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
- else echo "$(2)"; fi ;)
-
cflags-y :=
#
@@ -38,12 +34,10 @@ else
endif
ifdef CONFIG_32BIT
-gcc-abi = 32
tool-prefix = $(32bit-tool-prefix)
UTS_MACHINE := mips
endif
ifdef CONFIG_64BIT
-gcc-abi = 64
tool-prefix = $(64bit-tool-prefix)
UTS_MACHINE := mips64
endif
@@ -52,38 +46,28 @@ ifdef CONFIG_CROSSCOMPILE
CROSS_COMPILE := $(tool-prefix)
endif
-CHECKFLAGS-y += -D__linux__ -D__mips__ \
- -D_MIPS_SZINT=32 \
- -D_ABIO32=1 \
- -D_ABIN32=2 \
- -D_ABI64=3
-CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \
- -D_MIPS_SZLONG=32 \
- -D_MIPS_SZPTR=32 \
- -D__PTRDIFF_TYPE__=int
-CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \
- -D_MIPS_SZLONG=64 \
- -D_MIPS_SZPTR=64 \
- -D__PTRDIFF_TYPE__="long int"
-CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__
-CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
-
-CHECKFLAGS = $(CHECKFLAGS-y)
-
-ifdef CONFIG_BUILD_ELF64
-gas-abi = 64
-ld-emul = $(64bit-emul)
-vmlinux-32 = vmlinux.32
-vmlinux-64 = vmlinux
-else
-gas-abi = 32
+ifdef CONFIG_32BIT
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
vmlinux-64 = vmlinux.64
-cflags-$(CONFIG_64BIT) += $(call cc-option,-mno-explicit-relocs)
+cflags-y += -mabi=32
endif
+ifdef CONFIG_64BIT
+ld-emul = $(64bit-emul)
+vmlinux-32 = vmlinux.32
+vmlinux-64 = vmlinux
+
+cflags-y += -mabi=64
+ifdef CONFIG_BUILD_ELF64
+cflags-y += $(call cc-option,-mno-explicit-relocs)
+else
+cflags-y += $(call cc-option,-msym32)
+endif
+endif
+
+
#
# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
# code since it only slows down the whole thing. At some point we might make
@@ -105,162 +89,44 @@ MODFLAGS += -mlong-calls
# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
# when fed the toolchain default!
#
-cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
+cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB -D__MIPSEB__)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL -D__MIPSEL__)
cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
-fno-omit-frame-pointer
-#
-# Use: $(call set_gccflags,,,,,)
-#
-# , -- preferred CPU and ISA designations (may require
-# recent tools)
-# , -- fallback CPU and ISA designations (have to work
-# with up to the oldest supported tools)
-# -- an ISA designation used as an ABI selector for
-# gcc versions that do not support "-mabi=32"
-# (depending on the CPU type, either "mips1" or
-# "mips2")
-#
-set_gccflags = $(shell \
-while :; do \
- cpu=$(1); isa=-$(2); \
- for gcc_opt in -march= -mcpu=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
- done; \
- cpu=$(3); isa=-$(4); \
- for gcc_opt in -march= -mcpu=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
- done; \
- break; \
-done; \
-gcc_abi=-mabi=$(gcc-abi); gcc_cpu=$$cpu; \
-if $(CC) $$gcc_abi -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then \
- gcc_isa=$$isa; \
-else \
- gcc_abi=; gcc_isa=-$(5); \
-fi; \
-gas_abi=-Wa,-$(gcc-abi); gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
-while :; do \
- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
- $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- break 2; \
- done; \
- gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \
- break; \
-done; \
-if test "$(gcc-abi)" != "$(gas-abi)"; then \
- gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \
-fi; \
-if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \
- $(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- gcc_isa=; \
-fi; \
-echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa)
-
#
# CPU-dependent compiler/assembler options for optimization.
#
-cflags-$(CONFIG_CPU_R3000) += \
- $(call set_gccflags,r3000,mips1,r3000,mips1,mips1)
-CHECKFLAGS-$(CONFIG_CPU_R3000) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
-
-cflags-$(CONFIG_CPU_TX39XX) += \
- $(call set_gccflags,r3900,mips1,r3000,mips1,mips1)
-CHECKFLAGS-$(CONFIG_CPU_TX39XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS1
-
-cflags-$(CONFIG_CPU_R6000) += \
- $(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \
+cflags-$(CONFIG_CPU_R3000) += -march=r3000
+cflags-$(CONFIG_CPU_TX39XX) += -march=r3900
+cflags-$(CONFIG_CPU_R6000) += -march=r6000 -Wa,--trap
+cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap
+cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap
+cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap
+cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips2 -mtune=r4600) \
+ -Wa,-mips32 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips2 -mtune=r4600) \
+ -Wa,-mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips2 -mtune=r4600) \
+ -Wa,-mips64 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \
+ -Wa,-mips64r2 -Wa,--trap
+cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
+cflags-$(CONFIG_CPU_R5432) += $(call cc-options,-march=r5400,-march=r5000) \
-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R6000) += -D_MIPS_ISA=_MIPS_ISA_MIPS2
-
-cflags-$(CONFIG_CPU_R4300) += \
- $(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \
+cflags-$(CONFIG_CPU_NEVADA) += $(call cc-options,-march=rm5200,-march=r5000) \
-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R4300) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_VR41XX) += \
- $(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \
+cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_VR41XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_R4X00) += \
- $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
+cflags-$(CONFIG_CPU_RM9000) += $(call cc-option,-march=rm9000,-march=r5000) \
-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R4X00) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_TX49XX) += \
- $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
+cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \
-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_TX49XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3
-
-cflags-$(CONFIG_CPU_MIPS32_R1) += \
- $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
+cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap
+cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \
-Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
-
-cflags-$(CONFIG_CPU_MIPS32_R2) += \
- $(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS32
-
-cflags-$(CONFIG_CPU_MIPS64_R1) += \
- $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
-
-cflags-$(CONFIG_CPU_MIPS64_R2) += \
- $(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
-
-cflags-$(CONFIG_CPU_R5000) += \
- $(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R5000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_R5432) += \
- $(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R5432) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_NEVADA) += \
- $(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_NEVADA) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_RM7000) += \
- $(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_RM7000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_RM9000) += \
- $(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_RM9000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-
-cflags-$(CONFIG_CPU_SB1) += \
- $(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_SB1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64
-
-cflags-$(CONFIG_CPU_R8000) += \
- $(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R8000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
-
-cflags-$(CONFIG_CPU_R10000) += \
- $(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \
- -Wa,--trap
-CHECKFLAGS-$(CONFIG_CPU_R10000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4
ifdef CONFIG_CPU_SB1
ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
@@ -630,7 +496,6 @@ endif
ifdef CONFIG_SGI_IP27
core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/
cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27
-ifdef CONFIG_BUILD_ELF64
ifdef CONFIG_MAPPED_KERNEL
load-$(CONFIG_SGI_IP27) += 0xc00000004001c000
OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000
@@ -639,16 +504,6 @@ else
load-$(CONFIG_SGI_IP27) += 0xa80000000001c000
OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000
endif
-else
-ifdef CONFIG_MAPPED_KERNEL
-load-$(CONFIG_SGI_IP27) += 0xffffffffc001c000
-OBJCOPYFLAGS := --change-addresses=0xc000000080000000
-dataoffset-$(CONFIG_SGI_IP27) += 0x01000000
-else
-load-$(CONFIG_SGI_IP27) += 0xffffffff8001c000
-OBJCOPYFLAGS := --change-addresses=0xa800000080000000
-endif
-endif
endif
#
@@ -757,6 +612,12 @@ CFLAGS += $(cflags-y)
LDFLAGS += -m $(ld-emul)
+ifdef CONFIG_MIPS
+CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \
+ egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \
+ sed -e 's/^\#define /-D/' -e 's/ /="/' -e 's/$$/"/')
+endif
+
OBJCOPYFLAGS += --remove-section=.reginfo
#
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index 4dbde82c8215..d8df5fdb045f 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -38,7 +38,7 @@ struct cpu_spec cpu_specs[] = {
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
- { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
};
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index d00e8247d6c2..6ee090bd86c9 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -214,7 +214,7 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev)
if ( NULL != p )
{
memcpy(p, dev, sizeof(dbdev_tab_t));
- p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+ p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
ret = p->dev_id;
new_id++;
#if 0
@@ -260,7 +260,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
(stp->dev_flags & DEV_FLAGS_ANYUSE)) {
- /* Got source */
+ /* Got source */
stp->dev_flags |= DEV_FLAGS_INUSE;
if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
(dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 1905c6b104f2..1d82f2277517 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -174,7 +174,7 @@ int request_au1000_dma(int dev_id, const char *dev_str,
return -EINVAL;
#else
if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
- return -EINVAL;
+ return -EINVAL;
#endif
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 48d3f54f88f8..32702e5fbf67 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -20,7 +20,7 @@
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
.start = USB_OHCI_BASE,
- .end = USB_OHCI_BASE + USB_OHCI_LEN,
+ .end = USB_OHCI_BASE + USB_OHCI_LEN - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -264,7 +264,7 @@ static struct resource smc91x_resources[] = {
static struct platform_device smc91x_device = {
.name = "smc91x",
- .id = -1,
+ .id = -1,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
@@ -278,9 +278,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1100_lcd_device,
#endif
#ifdef CONFIG_SOC_AU1200
-#if 0 /* fixme */
&au1xxx_usb_ehci_device,
-#endif
&au1xxx_usb_gdt_device,
&au1xxx_usb_otg_device,
&au1200_lcd_device,
@@ -288,7 +286,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xxx_mmc_device,
#endif
#ifdef CONFIG_MIPS_DB1200
- &smc91x_device,
+ &smc91x_device,
#endif
};
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index eb155c071aa6..1080558c8100 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -90,7 +90,7 @@ void __init plat_setup(void)
else {
/* Clear to obtain best system bus performance */
clear_c0_config(1<<19); /* Clear Config[OD] */
- }
+ }
argptr = prom_getcmdline();
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index 883d3f3d8c53..f85f1524b366 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -359,7 +359,7 @@ static unsigned long do_fast_cp0_gettimeoffset(void)
: "hi", "lo", GCC_REG_ACCUM);
/*
- * Due to possible jiffies inconsistencies, we need to check
+ * Due to possible jiffies inconsistencies, we need to check
* the result so that we'll get a timer that is monotonic.
*/
if (res >= USECS_PER_JIFFY)
diff --git a/arch/mips/cobalt/Kconfig b/arch/mips/cobalt/Kconfig
new file mode 100644
index 000000000000..7c42b088d16c
--- /dev/null
+++ b/arch/mips/cobalt/Kconfig
@@ -0,0 +1,7 @@
+config EARLY_PRINTK
+ bool "Early console support"
+ depends on MIPS_COBALT
+ help
+ Provide early console support by direct access to the
+ on board UART. The UART must have been previously
+ initialised by the boot loader.
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index 3b6b7579d1de..720e757b2b64 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -4,4 +4,6 @@
obj-y := irq.o int-handler.o reset.o setup.o
+obj-$(CONFIG_EARLY_PRINTK) += console.o
+
EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c
new file mode 100644
index 000000000000..45c2d27c7564
--- /dev/null
+++ b/arch/mips/cobalt/console.c
@@ -0,0 +1,43 @@
+/*
+ * (C) P. Horton 2006
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+static void putchar(int c)
+{
+ if(c == '\n')
+ putchar('\r');
+
+ while(!(COBALT_UART[UART_LSR] & UART_LSR_THRE))
+ ;
+
+ COBALT_UART[UART_TX] = c;
+}
+
+static void cons_write(struct console *c, const char *s, unsigned n)
+{
+ while(n-- && *s)
+ putchar(*s++);
+}
+
+static struct console cons_info =
+{
+ .name = "uart",
+ .write = cons_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1,
+};
+
+void __init cobalt_early_console(void)
+{
+ register_console(&cons_info);
+
+ printk("Cobalt: early console registered\n");
+}
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index b9713a723053..4f9ea1210023 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -31,6 +31,7 @@
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
extern void cobalt_machine_power_off(void);
+extern void cobalt_early_console(void);
int cobalt_board_id;
@@ -109,14 +110,6 @@ void __init plat_setup(void)
/* I/O port resource must include UART and LCD/buttons */
ioport_resource.end = 0x0fffffff;
- /*
- * This is a prom style console. We just poke at the
- * UART to make it talk.
- * Only use this console if you really screw up and can't
- * get to the stage of setting up a real serial console.
- */
- /*ns16550_setup_console();*/
-
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < COBALT_IO_RESOURCES; i++)
request_resource(&ioport_resource, cobalt_io_resources + i);
@@ -136,6 +129,10 @@ void __init plat_setup(void)
#ifdef CONFIG_SERIAL_8250
if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
+#ifdef CONFIG_EARLY_PRINTK
+ cobalt_early_console();
+#endif
+
uart.line = 0;
uart.type = PORT_UNKNOWN;
uart.uartclk = 18432000;
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 89c21572a59c..9e1ae953e966 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:52 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:52 2006
#
CONFIG_MIPS=y
@@ -164,26 +164,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -335,6 +337,29 @@ CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -353,47 +378,30 @@ CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
@@ -403,13 +411,9 @@ CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
@@ -419,26 +423,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
@@ -494,6 +492,11 @@ CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -553,7 +556,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -663,7 +665,7 @@ CONFIG_SCSI_LOGGING=y
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
@@ -696,13 +698,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -785,6 +781,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -824,6 +821,7 @@ CONFIG_LAN_SAA9730=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -845,8 +843,6 @@ CONFIG_LAN_SAA9730=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -926,6 +922,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -933,7 +930,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -970,6 +966,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -1076,6 +1078,7 @@ CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
@@ -1118,6 +1121,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1225,6 +1229,7 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 6fd353779813..32984100a75e 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:54 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:53 2006
#
CONFIG_MIPS=y
@@ -169,29 +169,31 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -247,7 +249,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_BUILD_ELF64=y
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -309,6 +310,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -457,6 +463,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -478,6 +485,7 @@ CONFIG_MII=y
CONFIG_NET_SB1250_MAC=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -543,12 +551,15 @@ CONFIG_SERIO_RAW=m
#
# CONFIG_VT is not set
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
@@ -564,7 +575,6 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -654,6 +664,12 @@ CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -732,12 +748,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -770,6 +786,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -831,18 +848,20 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 5261e29ccf37..6c2961affbd6 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:55 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:54 2006
#
CONFIG_MIPS=y
@@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_TANBAC_TB022X is not set
# CONFIG_VICTOR_MPC30X is not set
CONFIG_ZAO_CAPCELLA=y
@@ -90,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
@@ -103,23 +103,18 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -155,26 +150,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -190,7 +187,6 @@ CONFIG_KMOD=y
#
# Block layer
#
-# CONFIG_LBD is not set
#
# IO Schedulers
@@ -228,7 +224,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
#
# Networking
@@ -286,6 +281,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -306,7 +306,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -444,6 +443,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -487,6 +487,7 @@ CONFIG_8139TOO_PIO=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -508,8 +509,6 @@ CONFIG_8139TOO_PIO=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -579,11 +578,6 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -599,7 +593,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -608,7 +601,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
-CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
@@ -622,6 +614,12 @@ CONFIG_GPIO_VR41XX=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -704,11 +702,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -741,6 +739,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -803,6 +802,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 1d3ee18ea8bb..8336b21d3db2 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:57 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:55 2006
#
CONFIG_MIPS=y
@@ -150,26 +150,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -271,6 +273,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -291,7 +298,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -364,9 +370,38 @@ CONFIG_BLK_DEV_IDEDISK=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
@@ -433,11 +468,21 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=y
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
@@ -453,6 +498,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -473,8 +519,6 @@ CONFIG_NET_ETHERNET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
#
# Wan interfaces
@@ -550,6 +594,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -557,7 +602,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -594,6 +638,12 @@ CONFIG_COBALT_LCD=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -678,12 +728,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -716,6 +766,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -774,6 +825,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 18ac7926c058..7f071403c8e3 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:59 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:56 2006
#
CONFIG_MIPS=y
@@ -151,26 +151,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -285,6 +288,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -312,6 +330,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -320,6 +343,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -332,7 +356,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -395,6 +418,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -512,6 +536,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -625,13 +650,13 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
@@ -675,6 +700,12 @@ CONFIG_SYNCLINK_CS=m
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -773,6 +804,7 @@ CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -805,6 +837,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -909,6 +942,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -963,3 +997,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 4f55f7414c9c..98590cac1ec5 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:00 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:57 2006
#
CONFIG_MIPS=y
@@ -151,26 +151,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -274,6 +277,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -301,6 +319,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -309,6 +332,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -321,7 +345,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -384,6 +407,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -501,6 +525,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -600,13 +625,13 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
@@ -643,6 +668,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -772,6 +803,7 @@ CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -804,6 +836,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -908,6 +941,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -962,3 +996,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 0e5de7d05f23..92888472dca0 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:03 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:58 2006
#
CONFIG_MIPS=y
@@ -151,27 +151,30 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -279,6 +282,21 @@ CONFIG_NETFILTER=y
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -306,6 +324,11 @@ CONFIG_NETFILTER=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -314,6 +337,7 @@ CONFIG_NETFILTER=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -385,6 +409,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -568,6 +593,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_MIPS_AU1X00_ENET is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -665,13 +691,13 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
@@ -715,6 +741,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -842,6 +874,7 @@ CONFIG_JFS_FS=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -881,6 +914,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -990,6 +1024,7 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1020,3 +1055,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 86e7be8412f3..5a415b1d4af0 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:05 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:59 2006
#
CONFIG_MIPS=y
@@ -153,26 +153,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -340,7 +364,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -561,6 +585,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -581,6 +606,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -601,8 +627,6 @@ CONFIG_MIPS_AU1X00_ENET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -692,16 +716,15 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -745,6 +768,12 @@ CONFIG_SYNCLINK_CS=m
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -788,8 +817,6 @@ CONFIG_SOUND=y
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
@@ -799,13 +826,16 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
@@ -815,6 +845,7 @@ CONFIG_SND_MTPAV=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -823,38 +854,38 @@ CONFIG_SND_MTPAV=m
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# ALSA MIPS devices
@@ -939,12 +970,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
@@ -958,6 +991,7 @@ CONFIG_USB_HIDINPUT=y
CONFIG_USB_YEALINK=m
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1057,6 +1091,7 @@ CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1089,6 +1124,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1193,6 +1229,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1247,3 +1284,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index ea5ab0ca5774..8dc1f18badfe 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:07 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:00 2006
#
CONFIG_MIPS=y
@@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -292,6 +295,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -319,6 +337,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -327,6 +350,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -339,7 +363,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -402,6 +425,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -593,6 +617,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -613,6 +638,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -633,8 +659,6 @@ CONFIG_MIPS_AU1X00_ENET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -732,16 +756,15 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -785,6 +808,12 @@ CONFIG_SYNCLINK_CS=m
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -878,6 +907,7 @@ CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -910,6 +940,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1014,6 +1045,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1068,3 +1100,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig
index a81e2de6947f..8fae63e47e5e 100644
--- a/arch/mips/configs/ddb5476_defconfig
+++ b/arch/mips/configs/ddb5476_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:09 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:02 2006
#
CONFIG_MIPS=y
@@ -151,26 +151,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -276,6 +278,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -296,7 +303,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -445,6 +451,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
@@ -469,6 +476,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -489,8 +497,6 @@ CONFIG_NET_ETHERNET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
#
# Wan interfaces
@@ -566,6 +572,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -573,7 +580,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -610,6 +616,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -669,7 +681,6 @@ CONFIG_FB=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -729,11 +740,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -766,6 +777,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -825,6 +837,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index f1c27c2fb033..a0fcd44e7709 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:11 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:02 2006
#
CONFIG_MIPS=y
@@ -151,26 +151,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -275,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -295,7 +302,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -414,6 +420,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -453,6 +460,7 @@ CONFIG_PCNET32=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -474,8 +482,6 @@ CONFIG_PCNET32=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
#
# Wan interfaces
@@ -551,6 +557,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -558,7 +565,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -595,6 +601,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -677,11 +689,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -714,6 +726,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -776,6 +789,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 08a4de6ec4a6..5a181eadd437 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:13 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:03 2006
#
CONFIG_MIPS=y
@@ -150,27 +150,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -278,6 +280,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -298,7 +305,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -436,6 +442,7 @@ CONFIG_CICADA_PHY=m
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_DM9000 is not set
CONFIG_DECLANCE=y
#
@@ -538,6 +545,12 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -636,12 +649,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -674,6 +687,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -734,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -750,18 +765,20 @@ CONFIG_ULTRIX_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index c9070cef08b1..8fbfc06a6a2a 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:14 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:04 2006
#
CONFIG_MIPS=y
@@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
CONFIG_CASIO_E55=y
# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_TANBAC_TB022X is not set
# CONFIG_VICTOR_MPC30X is not set
# CONFIG_ZAO_CAPCELLA is not set
@@ -88,7 +88,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
@@ -101,23 +101,18 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -153,26 +148,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -188,7 +185,6 @@ CONFIG_KMOD=y
#
# Block layer
#
-# CONFIG_LBD is not set
#
# IO Schedulers
@@ -223,7 +219,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
#
# Networking
@@ -278,6 +273,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -298,7 +298,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -433,6 +432,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
@@ -531,10 +531,6 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -563,14 +559,12 @@ CONFIG_WATCHDOG=y
# CONFIG_WDT is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
-CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
@@ -584,6 +578,12 @@ CONFIG_GPIO_VR41XX=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -665,11 +665,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -702,6 +702,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -763,6 +764,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index aa24d85ea94d..f2d43be69007 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:16 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:05 2006
#
CONFIG_MIPS=y
@@ -153,26 +153,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -282,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -302,7 +309,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -420,6 +426,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -440,6 +447,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -460,8 +468,6 @@ CONFIG_NET_ETHERNET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -545,6 +551,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -552,7 +559,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -589,6 +595,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -671,11 +683,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -708,6 +720,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -767,6 +780,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig
index eeed0e5ad260..ac5841c4b698 100644
--- a/arch/mips/configs/ev96100_defconfig
+++ b/arch/mips/configs/ev96100_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:18 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:06 2006
#
CONFIG_MIPS=y
@@ -157,26 +157,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -284,6 +286,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -304,7 +311,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -407,6 +413,7 @@ CONFIG_CICADA_PHY=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MIPS_GT96100ETH=y
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -496,6 +503,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -537,6 +545,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -617,11 +631,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -654,6 +668,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -713,6 +728,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index e56351abf87a..42d5cd7927cb 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:20 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:51 2006
#
CONFIG_MIPS=y
@@ -158,27 +158,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -317,6 +319,28 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -335,39 +359,23 @@ CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -384,13 +392,9 @@ CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
@@ -400,25 +404,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
@@ -445,6 +444,11 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -504,7 +508,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -641,6 +644,7 @@ CONFIG_CICADA_PHY=m
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_DM9000 is not set
CONFIG_SGISEEQ=y
#
@@ -786,6 +790,12 @@ CONFIG_MAX_RAW_DEVS=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -892,6 +902,7 @@ CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -934,6 +945,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1007,6 +1019,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -1062,6 +1075,7 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 58c22cd344d3..8c40590737e1 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -132,6 +132,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_SMP=y
CONFIG_NR_CPUS=64
CONFIG_PREEMPT_NONE=y
@@ -158,28 +159,30 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -234,7 +237,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_BUILD_ELF64=y
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -290,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_SCTP is not set
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -357,7 +363,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -368,7 +373,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
@@ -442,7 +447,7 @@ CONFIG_SCSI_LOGGING=y
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
@@ -470,13 +475,7 @@ CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -561,6 +560,7 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -581,6 +581,7 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -601,8 +602,6 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -656,6 +655,7 @@ CONFIG_SERIO_RAW=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -705,6 +705,12 @@ CONFIG_SGI_IP27_RTC=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -801,6 +807,7 @@ CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -834,6 +841,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -894,6 +902,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -910,6 +919,7 @@ CONFIG_SGI_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index a34db6e82b27..7fdcaf51face 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:24 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:09 2006
#
CONFIG_MIPS=y
@@ -158,26 +158,28 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -224,7 +226,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -286,6 +287,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -306,7 +312,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -392,7 +397,7 @@ CONFIG_SCSI_LOGGING=y
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
@@ -425,13 +430,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -498,6 +497,7 @@ CONFIG_SGI_O2MACE_ETH=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -518,6 +518,7 @@ CONFIG_SGI_O2MACE_ETH=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -538,8 +539,6 @@ CONFIG_SGI_O2MACE_ETH=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
#
# Wan interfaces
@@ -617,6 +616,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -624,7 +624,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -661,6 +660,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -743,11 +748,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -780,6 +785,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -835,6 +841,7 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -851,6 +858,7 @@ CONFIG_SGI_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
index b5fa9639db6f..c716996d9eca 100644
--- a/arch/mips/configs/it8172_defconfig
+++ b/arch/mips/configs/it8172_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:26 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:10 2006
#
CONFIG_MIPS=y
@@ -153,26 +153,29 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -281,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -301,7 +309,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -362,6 +369,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -500,6 +508,7 @@ CONFIG_CICADA_PHY=m
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -593,6 +602,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -634,6 +644,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -728,11 +744,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -765,6 +781,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -826,6 +843,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
index 71386938d47f..a8376d125e11 100644
--- a/arch/mips/configs/ivr_defconfig
+++ b/arch/mips/configs/ivr_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:27 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:11 2006
#
CONFIG_MIPS=y
@@ -150,26 +150,28 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -280,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -300,7 +307,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -440,6 +446,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -460,6 +467,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -480,8 +488,6 @@ CONFIG_NET_ETHERNET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -560,6 +566,7 @@ CONFIG_IT8172_SCR1=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -567,7 +574,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -603,6 +609,12 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -685,11 +697,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -722,6 +734,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -781,6 +794,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 14fb46886708..316015379dbc 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:29 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:12 2006
#
CONFIG_MIPS=y
@@ -158,27 +158,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -186,6 +187,7 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
@@ -294,7 +296,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -411,6 +412,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -469,8 +471,6 @@ CONFIG_MV643XX_ETH_2=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -515,6 +515,7 @@ CONFIG_IPW2200=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -522,7 +523,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -557,6 +557,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -631,7 +637,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -710,6 +715,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index a8ded3d74152..53fbef1ac25d 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:31 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:13 2006
#
CONFIG_MIPS=y
@@ -148,26 +148,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -272,6 +274,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -292,7 +299,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -411,6 +417,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -431,6 +438,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -451,8 +459,6 @@ CONFIG_NET_ETHERNET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
#
# Wan interfaces
@@ -529,6 +535,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
@@ -545,7 +552,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# Non-8250 serial port support
#
CONFIG_HAS_TXX9_SERIAL=y
-# CONFIG_SERIAL_JSM is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -582,6 +588,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -641,7 +653,6 @@ CONFIG_FB=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -698,11 +709,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -735,6 +746,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -794,6 +806,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index 6c5df76d48d9..ef0fa9fc79d6 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:33 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:14 2006
#
CONFIG_MIPS=y
@@ -156,26 +156,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -282,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -302,7 +310,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -365,6 +372,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -548,6 +556,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -568,6 +577,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -588,8 +598,6 @@ CONFIG_NET_ETHERNET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -665,6 +673,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -672,7 +681,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -709,6 +717,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -801,6 +815,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -833,6 +848,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -895,6 +911,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index da0677a03c1d..367d279efdd9 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Fri Dec 23 02:21:03 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:15 2006
#
CONFIG_MIPS=y
@@ -170,26 +170,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -341,6 +343,29 @@ CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -359,40 +384,23 @@ CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -409,13 +417,9 @@ CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
@@ -425,26 +429,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
@@ -500,6 +498,11 @@ CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -559,7 +562,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -734,13 +736,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -823,6 +819,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -862,6 +859,7 @@ CONFIG_PCNET32=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -883,8 +881,6 @@ CONFIG_PCNET32=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -961,6 +957,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -968,7 +965,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -1004,6 +1000,12 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -1110,6 +1112,7 @@ CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
@@ -1152,6 +1155,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1259,6 +1263,7 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index ac39ab7feeb7..fe78961762b8 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:37 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:16 2006
#
CONFIG_MIPS=y
@@ -156,27 +156,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -297,6 +299,11 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -525,6 +532,7 @@ CONFIG_SERIO_SERPORT=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -566,6 +574,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -640,11 +654,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_INOTIFY is not set
@@ -677,6 +691,7 @@ CONFIG_PROC_FS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -738,17 +753,19 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 2b5ea37484e4..e4620e7f0a5e 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:39 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:17 2006
#
CONFIG_MIPS=y
@@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_TANBAC_TB022X is not set
CONFIG_VICTOR_MPC30X=y
# CONFIG_ZAO_CAPCELLA is not set
@@ -90,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
@@ -103,23 +103,18 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -155,26 +150,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -190,7 +187,6 @@ CONFIG_KMOD=y
#
# Block layer
#
-# CONFIG_LBD is not set
#
# IO Schedulers
@@ -229,7 +225,6 @@ CONFIG_PCMCIA_IOCTL=y
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-CONFIG_PCMCIA_VRC4173=y
#
# PCI Hotplug Support
@@ -241,7 +236,6 @@ CONFIG_PCMCIA_VRC4173=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
#
# Networking
@@ -296,6 +290,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -455,6 +454,7 @@ CONFIG_MII=m
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -604,11 +604,6 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -624,7 +619,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -640,7 +634,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
-CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
@@ -654,6 +647,12 @@ CONFIG_GPIO_VR41XX=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -740,6 +739,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
@@ -762,6 +762,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -846,11 +847,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -883,6 +884,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -941,6 +943,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index 7ad8718c1b69..925d8adef88d 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:41 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:18 2006
#
CONFIG_MIPS=y
@@ -159,27 +159,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -291,6 +293,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -324,6 +341,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -332,6 +354,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -344,7 +367,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -426,7 +448,7 @@ CONFIG_SCSI_PROC_FS=y
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
@@ -455,13 +477,7 @@ CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -528,6 +544,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -567,6 +584,7 @@ CONFIG_E100=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -592,8 +610,6 @@ CONFIG_MV643XX_ETH_2=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -675,6 +691,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -682,7 +699,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -718,6 +734,12 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -777,7 +799,6 @@ CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -861,6 +882,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -893,6 +915,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -999,6 +1022,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1052,3 +1076,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index e8d6bb3551a2..ee1cf9b9eb9a 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:43 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:19 2006
#
CONFIG_MIPS=y
@@ -154,26 +154,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -220,7 +222,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -281,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -301,7 +307,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -420,6 +425,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -440,6 +446,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -461,8 +468,6 @@ CONFIG_NET_ETHERNET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
#
# Wan interfaces
@@ -538,6 +543,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -545,7 +551,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -582,6 +587,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -664,11 +675,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -701,6 +712,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -763,6 +775,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index f3787b68bdd1..d80ff278f2af 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:44 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:20 2006
#
CONFIG_MIPS=y
@@ -159,26 +159,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -280,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -300,7 +307,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -403,6 +409,7 @@ CONFIG_CICADA_PHY=y
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -492,6 +499,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -533,6 +541,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -613,11 +627,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -650,6 +664,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -712,6 +727,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index b6126ad4d06d..c0f508d180c4 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:46 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:21 2006
#
CONFIG_MIPS=y
@@ -157,26 +157,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -223,7 +225,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -284,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -304,7 +310,6 @@ CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
#
# Device Drivers
@@ -424,6 +429,7 @@ CONFIG_GALILEO_64240_ETH=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -444,6 +450,7 @@ CONFIG_GALILEO_64240_ETH=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -464,8 +471,6 @@ CONFIG_GALILEO_64240_ETH=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=y
#
# Wan interfaces
@@ -541,6 +546,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -548,7 +554,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -585,6 +590,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -667,11 +678,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -704,6 +715,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -766,6 +778,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 883626afc47d..194b3c772bb7 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:48 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:22 2006
#
CONFIG_MIPS=y
@@ -153,26 +153,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -287,6 +290,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -314,6 +332,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -322,6 +345,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -334,7 +358,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -397,6 +420,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -514,6 +538,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_MIPS_AU1X00_ENET is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
@@ -619,13 +644,13 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
@@ -669,6 +694,12 @@ CONFIG_SYNCLINK_CS=m
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -767,6 +798,7 @@ CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -799,6 +831,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -903,6 +936,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -957,3 +991,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index f8fbc77f924e..8985725e6a98 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:50 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:24 2006
#
CONFIG_MIPS=y
@@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -340,7 +364,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -589,6 +613,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -609,6 +634,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -629,8 +655,6 @@ CONFIG_MIPS_AU1X00_ENET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -728,16 +752,15 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -781,6 +804,12 @@ CONFIG_SYNCLINK_CS=m
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -874,6 +903,7 @@ CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -906,6 +936,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1010,6 +1041,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1064,3 +1096,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 3d694cd68d38..adbf997b540e 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:52 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:25 2006
#
CONFIG_MIPS=y
@@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -340,7 +364,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -589,6 +613,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -609,6 +634,7 @@ CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -629,8 +655,6 @@ CONFIG_MIPS_AU1X00_ENET=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# PCMCIA network device support
@@ -720,16 +744,15 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_AU1X00 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -773,6 +796,12 @@ CONFIG_SYNCLINK_CS=m
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -866,6 +895,7 @@ CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -898,6 +928,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1002,6 +1033,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1056,3 +1088,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index fba624a792a9..b5db700450ba 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:54 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:26 2006
#
CONFIG_MIPS=y
@@ -151,28 +151,30 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -281,6 +283,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -308,7 +315,7 @@ CONFIG_TCP_CONG_BIC=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
@@ -435,7 +442,7 @@ CONFIG_SCSI_CONSTANTS=y
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
@@ -464,13 +471,7 @@ CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -528,6 +529,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -571,6 +573,7 @@ CONFIG_8139TOO_8129=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -668,7 +671,6 @@ CONFIG_HW_CONSOLE=y
# Non-8250 serial port support
#
# CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -705,6 +707,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -801,6 +809,8 @@ CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
@@ -823,6 +833,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -906,11 +917,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -946,6 +957,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1049,18 +1061,20 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
index 4c650e708133..4187287f0763 100644
--- a/arch/mips/configs/pnx8550-v2pci_defconfig
+++ b/arch/mips/configs/pnx8550-v2pci_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:06:58 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:28 2006
#
CONFIG_MIPS=y
@@ -152,27 +152,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -279,6 +281,21 @@ CONFIG_NETFILTER=y
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -312,6 +329,11 @@ CONFIG_NETFILTER=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -320,6 +342,7 @@ CONFIG_NETFILTER=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -339,7 +362,7 @@ CONFIG_NETFILTER=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
@@ -466,7 +489,7 @@ CONFIG_BLK_DEV_SD=y
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
@@ -500,13 +523,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -564,6 +581,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -607,6 +625,7 @@ CONFIG_8139TOO=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -721,6 +740,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
@@ -737,7 +757,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# Non-8250 serial port support
#
# CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -824,6 +843,12 @@ CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -863,6 +888,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -918,7 +944,6 @@ CONFIG_FB=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -988,13 +1013,16 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1008,6 +1036,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1107,6 +1136,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1142,6 +1172,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1246,6 +1277,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1299,3 +1331,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index c02becab850b..31f5afabafa8 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc2
-# Fri Feb 3 17:14:27 2006
+# Sun Feb 12 19:18:55 2006
#
CONFIG_MIPS=y
@@ -133,7 +133,6 @@ CONFIG_PREEMPT_NONE=y
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -145,7 +144,7 @@ CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
@@ -222,6 +221,7 @@ CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -476,8 +476,9 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
@@ -627,7 +628,7 @@ CONFIG_FUSE_FS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-# CONFIG_SYSFS is not set
+CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
@@ -680,12 +681,13 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0"
+CONFIG_CMDLINE=""
#
# Security options
#
# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
#
# Cryptographic options
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index 9aaa43024aec..b126f763cf51 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:03 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:30 2006
#
CONFIG_MIPS=y
@@ -160,27 +160,30 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -291,6 +294,21 @@ CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -324,6 +342,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -332,6 +355,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -407,6 +431,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
@@ -598,6 +623,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
@@ -654,6 +680,7 @@ CONFIG_NET_PCI=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -687,8 +714,8 @@ CONFIG_NET_RADIO=y
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
-# CONFIG_IPW_DEBUG is not set
CONFIG_IPW2200=m
+# CONFIG_IPW2200_DEBUG is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
@@ -795,7 +822,6 @@ CONFIG_HW_CONSOLE=y
# Non-8250 serial port support
#
CONFIG_HAS_TXX9_SERIAL=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -832,6 +858,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -887,7 +919,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
-# CONFIG_FB_ATY_XL_INIT is not set
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
@@ -896,7 +927,6 @@ CONFIG_FB_ATY_CT=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -958,12 +988,14 @@ CONFIG_USB=y
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -977,6 +1009,7 @@ CONFIG_USB_HIDDEV=y
CONFIG_USB_YEALINK=m
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1078,6 +1111,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1115,6 +1149,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1228,6 +1263,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
@@ -1281,3 +1317,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index abf61095931e..463ed3dbf6ae 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:06 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:31 2006
#
CONFIG_MIPS=y
@@ -161,27 +161,29 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -297,6 +299,28 @@ CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -315,39 +339,23 @@ CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -364,13 +372,9 @@ CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
@@ -380,26 +384,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_PHYSDEV=m
+CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
@@ -451,6 +449,11 @@ CONFIG_DECNET=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -530,7 +533,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -541,7 +543,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
@@ -657,7 +659,7 @@ CONFIG_SCSI_CONSTANTS=y
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
@@ -678,6 +680,7 @@ CONFIG_ISCSI_TCP=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
@@ -704,13 +707,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
@@ -801,6 +798,7 @@ CONFIG_MII=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
@@ -858,6 +856,7 @@ CONFIG_EEPRO100=m
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_TIGON3 is not set
@@ -879,8 +878,6 @@ CONFIG_VIA_VELOCITY=m
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -969,6 +966,7 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -979,7 +977,6 @@ CONFIG_SERIAL_8250_RSA=y
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -1020,6 +1017,12 @@ CONFIG_RTC=m
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -1123,12 +1126,15 @@ CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
@@ -1151,6 +1157,7 @@ CONFIG_USB_EGALAX=m
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1309,6 +1316,7 @@ CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
@@ -1351,6 +1359,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1432,6 +1441,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -1487,6 +1497,7 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 52048c906079..da68c3f72050 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:09 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:32 2006
#
CONFIG_MIPS=y
@@ -173,27 +173,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -247,7 +249,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
@@ -309,6 +310,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -329,7 +335,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -472,6 +477,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -493,6 +499,7 @@ CONFIG_MII=y
CONFIG_NET_SB1250_MAC=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -513,8 +520,6 @@ CONFIG_NET_SB1250_MAC=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -560,12 +565,15 @@ CONFIG_SERIO_RAW=m
#
# CONFIG_VT is not set
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
@@ -581,7 +589,6 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -618,6 +625,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -696,12 +709,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -734,6 +747,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -795,6 +809,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index 41dd70824976..9a936d7b7c0c 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:10 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:33 2006
#
CONFIG_MIPS=y
@@ -153,25 +153,28 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -330,6 +333,7 @@ CONFIG_RAID_ATTRS=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -371,6 +375,12 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -444,7 +454,6 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -481,6 +490,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -513,6 +523,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -529,6 +540,7 @@ CONFIG_PARTITION_ADVANCED=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 83969466ecf6..c2dee0d1c72c 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:12 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:34 2006
#
CONFIG_MIPS=y
@@ -63,11 +63,12 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
CONFIG_TANBAC_TB022X=y
CONFIG_TANBAC_TB0226=y
+CONFIG_TANBAC_TB0287=y
# CONFIG_VICTOR_MPC30X is not set
# CONFIG_ZAO_CAPCELLA is not set
CONFIG_PCI_VR41XX=y
@@ -91,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
@@ -104,23 +105,18 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -156,26 +152,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -191,7 +189,6 @@ CONFIG_KMOD=y
#
# Block layer
#
-# CONFIG_LBD is not set
#
# IO Schedulers
@@ -229,7 +226,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
#
# Networking
@@ -293,6 +289,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -313,7 +314,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -324,7 +324,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
@@ -397,7 +397,7 @@ CONFIG_SCSI_MULTI_LUN=y
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
@@ -426,13 +426,7 @@ CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -499,6 +493,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -538,6 +533,7 @@ CONFIG_EEPRO100=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -559,7 +555,6 @@ CONFIG_EEPRO100=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW2200 is not set
#
# Wan interfaces
@@ -630,11 +625,6 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -650,7 +640,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -674,6 +663,12 @@ CONFIG_GPIO_VR41XX=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -770,6 +765,8 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
@@ -792,6 +789,7 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -877,11 +875,11 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
@@ -914,6 +912,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1021,6 +1020,7 @@ CONFIG_NLS_ISO8859_1=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index ce7b9ed44432..be99261d7997 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:15 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:35 2006
#
CONFIG_MIPS=y
@@ -63,11 +63,12 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
CONFIG_TANBAC_TB022X=y
# CONFIG_TANBAC_TB0226 is not set
+CONFIG_TANBAC_TB0287=y
# CONFIG_VICTOR_MPC30X is not set
# CONFIG_ZAO_CAPCELLA is not set
CONFIG_PCI_VR41XX=y
@@ -91,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
@@ -104,23 +105,18 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -156,26 +152,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -191,7 +189,6 @@ CONFIG_KMOD=y
#
# Block layer
#
-# CONFIG_LBD is not set
#
# IO Schedulers
@@ -229,7 +226,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
#
# Networking
@@ -294,6 +290,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -314,7 +315,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -436,6 +436,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -480,6 +481,7 @@ CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -501,8 +503,6 @@ CONFIG_R8169=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -583,11 +583,6 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -603,7 +598,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -613,7 +607,6 @@ CONFIG_TANBAC_TB0219=y
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
-CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
#
@@ -627,6 +620,12 @@ CONFIG_GPIO_VR41XX=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -715,6 +714,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
@@ -737,6 +737,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -840,6 +841,7 @@ CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
@@ -879,6 +881,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -986,6 +989,7 @@ CONFIG_NLS_ISO8859_1=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
deleted file mode 100644
index 95344832d66e..000000000000
--- a/arch/mips/configs/tb0287_defconfig
+++ /dev/null
@@ -1,1105 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-mm1
-# Tue Oct 25 00:20:22 2005
-#
-CONFIG_MIPS=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SWAP_PREFETCH=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-CONFIG_MACH_VR41XX=y
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_CMBVR4133 is not set
-CONFIG_TANBAC_TB022X=y
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0287=y
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-CONFIG_TCP_CONG_ADVANCED=y
-
-#
-# TCP congestion control
-#
-CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI Transport Layers
-#
-# CONFIG_SAS_CLASS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-
-#
-# Texas Instruments PCILynx requires I2C
-#
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_TANBAC_TB0219 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-CONFIG_GPIO_VR41XX=y
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_GOTEMP is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# EDAC - error detection and reporting (RAS)
-#
-# CONFIG_EDAC is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_QUOTACTL=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 02b2551023d4..7132e296d40a 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:17 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:36 2006
#
CONFIG_MIPS=y
@@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_CASIO_E55 is not set
CONFIG_IBM_WORKPAD=y
+# CONFIG_NEC_CMBVR4133 is not set
# CONFIG_TANBAC_TB022X is not set
# CONFIG_VICTOR_MPC30X is not set
# CONFIG_ZAO_CAPCELLA is not set
@@ -88,7 +88,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
@@ -101,23 +101,18 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_VR41XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -153,26 +148,28 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -188,7 +185,6 @@ CONFIG_KMOD=y
#
# Block layer
#
-# CONFIG_LBD is not set
#
# IO Schedulers
@@ -234,7 +230,6 @@ CONFIG_PCMCIA_PROBE=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
#
# Networking
@@ -289,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -309,7 +309,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -445,6 +444,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
@@ -556,10 +556,6 @@ CONFIG_HW_CONSOLE=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_VR41XX=y
-CONFIG_SERIAL_VR41XX_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -588,7 +584,6 @@ CONFIG_WATCHDOG=y
# CONFIG_WDT is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
-# CONFIG_RTC_VR41XX is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -602,7 +597,6 @@ CONFIG_WATCHDOG=y
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
-# CONFIG_GPIO_VR41XX is not set
# CONFIG_RAW_DRIVER is not set
#
@@ -616,6 +610,12 @@ CONFIG_WATCHDOG=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -699,12 +699,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -737,6 +737,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -798,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 468c2e443d71..67457850941d 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:07:19 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:40:37 2006
#
CONFIG_MIPS=y
@@ -154,8 +154,6 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
@@ -164,19 +162,22 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -184,6 +185,7 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
@@ -295,7 +297,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -413,6 +414,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -452,8 +454,6 @@ CONFIG_TITAN_GE=y
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
-# CONFIG_IPW_DEBUG is not set
-CONFIG_IPW2200=m
#
# Wan interfaces
@@ -498,6 +498,7 @@ CONFIG_IPW2200=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -505,7 +506,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -541,6 +541,12 @@ CONFIG_GEN_RTC_X=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -615,7 +621,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
@@ -694,12 +699,13 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -707,6 +713,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index 83d4556c3cb5..81cb5a76cfb7 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -45,7 +45,7 @@ static inline void pmax_setup_memory_region(void)
*/
for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE;
mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000;
- memory_page += CHUNK_SIZE) {
+ memory_page += CHUNK_SIZE) {
dummy = *memory_page;
}
memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index 4f125e9e8e0b..42d5cd7927cb 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 01:05:49 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 15:39:51 2006
#
CONFIG_MIPS=y
@@ -158,27 +158,29 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -317,6 +319,28 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
@@ -335,39 +359,23 @@ CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_DCCP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -384,13 +392,9 @@ CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
@@ -400,25 +404,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
@@ -445,6 +444,11 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -504,7 +508,6 @@ CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
#
# Device Drivers
@@ -641,6 +644,7 @@ CONFIG_CICADA_PHY=m
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_DM9000 is not set
CONFIG_SGISEEQ=y
#
@@ -786,6 +790,12 @@ CONFIG_MAX_RAW_DEVS=256
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -892,6 +902,7 @@ CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -934,6 +945,7 @@ CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1007,6 +1019,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -1062,6 +1075,7 @@ CONFIG_NLS_UTF8=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S
index 4dbcf91db884..dc752c67b528 100644
--- a/arch/mips/jazz/int-handler.S
+++ b/arch/mips/jazz/int-handler.S
@@ -248,17 +248,17 @@ loc_call: /*
and t2,s1
sh t2,JAZZ_IO_IRQ_ENABLE
- nor s1,zero,s1
+ nor s1,zero,s1
jal do_IRQ
- /*
- * Reenable interrupt
- */
+ /*
+ * Reenable interrupt
+ */
lhu t2,JAZZ_IO_IRQ_ENABLE
- or t2,s1
+ or t2,s1
sh t2,JAZZ_IO_IRQ_ENABLE
- j ret_from_irq
+ j ret_from_irq
/*
* "Jump extender" to reach spurious_interrupt
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 292f8b243a5e..58b3b14873cb 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -291,7 +291,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
* for documentation. Commented out because it shares
* it's c0_prid id number with the TX3900.
*/
- c->cputype = CPU_R4650;
+ c->cputype = CPU_R4650;
c->isa_level = MIPS_CPU_ISA_III;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
c->tlbsize = 48;
@@ -604,7 +604,7 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
case PRID_IMP_AU1_REV2:
switch ((c->processor_id >> 24) & 0xff) {
case 0:
- c->cputype = CPU_AU1000;
+ c->cputype = CPU_AU1000;
break;
case 1:
c->cputype = CPU_AU1500;
@@ -705,7 +705,7 @@ __init void cpu_probe(void)
break;
case PRID_COMP_PHILIPS:
cpu_probe_philips(c);
- break;
+ break;
default:
c->cputype = CPU_UNKNOWN;
}
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 83b8986f9401..235ad9f6bd35 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -41,7 +41,7 @@
*/
.align 5
NESTED(trap_low, GDB_FR_SIZE, sp)
- .set noat
+ .set noat
.set noreorder
mfc0 k0, CP0_STATUS
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index e00e5f6e7fdd..013bc93688e8 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -69,7 +69,7 @@
* Revalidate the inode. This is required for proper NFS attribute caching.
*/
-int cp_compat_stat(struct kstat *stat, struct compat_stat *statbuf)
+int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
{
struct compat_stat tmp;
@@ -106,6 +106,10 @@ sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
unsigned long error;
error = -EINVAL;
+ if (pgoff & (~PAGE_MASK >> 12))
+ goto out;
+ pgoff >>= PAGE_SHIFT-12;
+
if (!(flags & MAP_ANONYMOUS)) {
error = -EBADF;
file = fget(fd);
@@ -125,7 +129,7 @@ out:
}
-asmlinkage int sys_truncate64(const char *path, unsigned int high,
+asmlinkage int sys_truncate64(const char __user *path, unsigned int high,
unsigned int low)
{
if ((int)high < 0)
@@ -161,12 +165,6 @@ out:
return error;
}
-asmlinkage int
-sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
-{
- return compat_sys_wait4(pid, stat_addr, options, NULL);
-}
-
asmlinkage long
sysn32_waitid(int which, compat_pid_t pid,
siginfo_t __user *uinfo, int options,
@@ -175,6 +173,7 @@ sysn32_waitid(int which, compat_pid_t pid,
struct rusage ru;
long ret;
mm_segment_t old_fs = get_fs();
+ int si_signo;
if (!access_ok(VERIFY_WRITE, uinfo, sizeof(*uinfo)))
return -EFAULT;
@@ -184,7 +183,9 @@ sysn32_waitid(int which, compat_pid_t pid,
uru ? (struct rusage __user *) &ru : NULL);
set_fs (old_fs);
- if (ret < 0 || uinfo->si_signo == 0)
+ if (__get_user(si_signo, &uinfo->si_signo))
+ return -EFAULT;
+ if (ret < 0 || si_signo == 0)
return ret;
if (uru)
@@ -208,14 +209,14 @@ struct sysinfo32 {
char _f[8];
};
-asmlinkage int sys32_sysinfo(struct sysinfo32 *info)
+asmlinkage int sys32_sysinfo(struct sysinfo32 __user *info)
{
struct sysinfo s;
int ret, err;
mm_segment_t old_fs = get_fs ();
set_fs (KERNEL_DS);
- ret = sys_sysinfo(&s);
+ ret = sys_sysinfo((struct sysinfo __user *)&s);
set_fs (old_fs);
err = put_user (s.uptime, &info->uptime);
err |= __put_user (s.loads[0], &info->loads[0]);
@@ -245,11 +246,11 @@ struct rlimit32 {
};
#ifdef __MIPSEB__
-asmlinkage long sys32_truncate64(const char * path, unsigned long __dummy,
+asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy,
int length_hi, int length_lo)
#endif
#ifdef __MIPSEL__
-asmlinkage long sys32_truncate64(const char * path, unsigned long __dummy,
+asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy,
int length_lo, int length_hi)
#endif
{
@@ -277,7 +278,7 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
}
static inline long
-get_tv32(struct timeval *o, struct compat_timeval *i)
+get_tv32(struct timeval *o, struct compat_timeval __user *i)
{
return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
(__get_user(o->tv_sec, &i->tv_sec) |
@@ -285,7 +286,7 @@ get_tv32(struct timeval *o, struct compat_timeval *i)
}
static inline long
-put_tv32(struct compat_timeval *o, struct timeval *i)
+put_tv32(struct compat_timeval __user *o, struct timeval *i)
{
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
(__put_user(i->tv_sec, &o->tv_sec) |
@@ -295,7 +296,7 @@ put_tv32(struct compat_timeval *o, struct timeval *i)
extern struct timezone sys_tz;
asmlinkage int
-sys32_gettimeofday(struct compat_timeval *tv, struct timezone *tz)
+sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
{
if (tv) {
struct timeval ktv;
@@ -310,7 +311,7 @@ sys32_gettimeofday(struct compat_timeval *tv, struct timezone *tz)
return 0;
}
-static inline long get_ts32(struct timespec *o, struct compat_timeval *i)
+static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
{
long usec;
@@ -325,7 +326,7 @@ static inline long get_ts32(struct timespec *o, struct compat_timeval *i)
}
asmlinkage int
-sys32_settimeofday(struct compat_timeval *tv, struct timezone *tz)
+sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
{
struct timespec kts;
struct timezone ktz;
@@ -343,7 +344,7 @@ sys32_settimeofday(struct compat_timeval *tv, struct timezone *tz)
}
asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
- unsigned int offset_low, loff_t * result,
+ unsigned int offset_low, loff_t __user * result,
unsigned int origin)
{
return sys_llseek(fd, offset_high, offset_low, result, origin);
@@ -353,12 +354,12 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
lseek back to original location. They fail just like lseek does on
non-seekable files. */
-asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf,
+asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
size_t count, u32 unused, u64 a4, u64 a5)
{
ssize_t ret;
struct file * file;
- ssize_t (*read)(struct file *, char *, size_t, loff_t *);
+ ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
loff_t pos;
ret = -EBADF;
@@ -388,12 +389,12 @@ bad_file:
return ret;
}
-asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf,
+asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
size_t count, u32 unused, u64 a4, u64 a5)
{
ssize_t ret;
struct file * file;
- ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
+ ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
loff_t pos;
ret = -EBADF;
@@ -426,14 +427,14 @@ bad_file:
}
asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
- struct compat_timespec *interval)
+ struct compat_timespec __user *interval)
{
struct timespec t;
int ret;
mm_segment_t old_fs = get_fs ();
set_fs (KERNEL_DS);
- ret = sys_sched_rr_get_interval(pid, &t);
+ ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t);
set_fs (old_fs);
if (put_user (t.tv_sec, &interval->tv_sec) ||
__put_user (t.tv_nsec, &interval->tv_nsec))
@@ -551,7 +552,7 @@ struct ipc_kludge32 {
};
static int
-do_sys32_semctl(int first, int second, int third, void *uptr)
+do_sys32_semctl(int first, int second, int third, void __user *uptr)
{
union semun fourth;
u32 pad;
@@ -562,12 +563,12 @@ do_sys32_semctl(int first, int second, int third, void *uptr)
if (!uptr)
return -EINVAL;
err = -EFAULT;
- if (get_user (pad, (u32 *)uptr))
+ if (get_user (pad, (u32 __user *)uptr))
return err;
if ((third & ~IPC_64) == SETVAL)
fourth.val = (int)pad;
else
- fourth.__pad = (void *)A(pad);
+ fourth.__pad = (void __user *)A(pad);
switch (third & ~IPC_64) {
case IPC_INFO:
case IPC_RMID:
@@ -585,14 +586,14 @@ do_sys32_semctl(int first, int second, int third, void *uptr)
case IPC_STAT:
case SEM_STAT:
- fourth.__pad = &s;
+ fourth.__pad = (struct semid64_ds __user *)&s;
old_fs = get_fs();
set_fs(KERNEL_DS);
err = sys_semctl(first, second, third | IPC_64, fourth);
set_fs(old_fs);
if (third & IPC_64) {
- struct semid64_ds32 *usp64 = (struct semid64_ds32 *) A(pad);
+ struct semid64_ds32 __user *usp64 = (struct semid64_ds32 __user *) A(pad);
if (!access_ok(VERIFY_WRITE, usp64, sizeof(*usp64))) {
err = -EFAULT;
@@ -609,7 +610,7 @@ do_sys32_semctl(int first, int second, int third, void *uptr)
err2 |= __put_user(s.sem_ctime, &usp64->sem_ctime);
err2 |= __put_user(s.sem_nsems, &usp64->sem_nsems);
} else {
- struct semid_ds32 *usp32 = (struct semid_ds32 *) A(pad);
+ struct semid_ds32 __user *usp32 = (struct semid_ds32 __user *) A(pad);
if (!access_ok(VERIFY_WRITE, usp32, sizeof(*usp32))) {
err = -EFAULT;
@@ -639,9 +640,9 @@ do_sys32_semctl(int first, int second, int third, void *uptr)
}
static int
-do_sys32_msgsnd (int first, int second, int third, void *uptr)
+do_sys32_msgsnd (int first, int second, int third, void __user *uptr)
{
- struct msgbuf32 *up = (struct msgbuf32 *)uptr;
+ struct msgbuf32 __user *up = (struct msgbuf32 __user *)uptr;
struct msgbuf *p;
mm_segment_t old_fs;
int err;
@@ -660,7 +661,7 @@ do_sys32_msgsnd (int first, int second, int third, void *uptr)
goto out;
old_fs = get_fs ();
set_fs (KERNEL_DS);
- err = sys_msgsnd (first, p, second, third);
+ err = sys_msgsnd (first, (struct msgbuf __user *)p, second, third);
set_fs (old_fs);
out:
kfree (p);
@@ -670,15 +671,15 @@ out:
static int
do_sys32_msgrcv (int first, int second, int msgtyp, int third,
- int version, void *uptr)
+ int version, void __user *uptr)
{
- struct msgbuf32 *up;
+ struct msgbuf32 __user *up;
struct msgbuf *p;
mm_segment_t old_fs;
int err;
if (!version) {
- struct ipc_kludge32 *uipck = (struct ipc_kludge32 *)uptr;
+ struct ipc_kludge32 __user *uipck = (struct ipc_kludge32 __user *)uptr;
struct ipc_kludge32 ipck;
err = -EINVAL;
@@ -687,7 +688,7 @@ do_sys32_msgrcv (int first, int second, int msgtyp, int third,
err = -EFAULT;
if (copy_from_user (&ipck, uipck, sizeof (struct ipc_kludge32)))
goto out;
- uptr = (void *)AA(ipck.msgp);
+ uptr = (void __user *)AA(ipck.msgp);
msgtyp = ipck.msgtyp;
}
@@ -699,11 +700,11 @@ do_sys32_msgrcv (int first, int second, int msgtyp, int third,
goto out;
old_fs = get_fs ();
set_fs (KERNEL_DS);
- err = sys_msgrcv (first, p, second + 4, msgtyp, third);
+ err = sys_msgrcv (first, (struct msgbuf __user *)p, second + 4, msgtyp, third);
set_fs (old_fs);
if (err < 0)
goto free_then_out;
- up = (struct msgbuf32 *)uptr;
+ up = (struct msgbuf32 __user *)uptr;
if (put_user (p->mtype, &up->mtype) ||
__copy_to_user (&up->mtext, p->mtext, err))
err = -EFAULT;
@@ -714,19 +715,19 @@ out:
}
static int
-do_sys32_msgctl (int first, int second, void *uptr)
+do_sys32_msgctl (int first, int second, void __user *uptr)
{
int err = -EINVAL, err2;
struct msqid64_ds m;
- struct msqid_ds32 *up32 = (struct msqid_ds32 *)uptr;
- struct msqid64_ds32 *up64 = (struct msqid64_ds32 *)uptr;
+ struct msqid_ds32 __user *up32 = (struct msqid_ds32 __user *)uptr;
+ struct msqid64_ds32 __user *up64 = (struct msqid64_ds32 __user *)uptr;
mm_segment_t old_fs;
switch (second & ~IPC_64) {
case IPC_INFO:
case IPC_RMID:
case MSG_INFO:
- err = sys_msgctl (first, second, (struct msqid_ds *)uptr);
+ err = sys_msgctl (first, second, (struct msqid_ds __user *)uptr);
break;
case IPC_SET:
@@ -753,7 +754,7 @@ do_sys32_msgctl (int first, int second, void *uptr)
break;
old_fs = get_fs();
set_fs(KERNEL_DS);
- err = sys_msgctl(first, second | IPC_64, (struct msqid_ds *)&m);
+ err = sys_msgctl(first, second | IPC_64, (struct msqid_ds __user *)&m);
set_fs(old_fs);
break;
@@ -761,7 +762,7 @@ do_sys32_msgctl (int first, int second, void *uptr)
case MSG_STAT:
old_fs = get_fs();
set_fs(KERNEL_DS);
- err = sys_msgctl(first, second | IPC_64, (struct msqid_ds *)&m);
+ err = sys_msgctl(first, second | IPC_64, (struct msqid_ds __user *)&m);
set_fs(old_fs);
if (second & IPC_64) {
if (!access_ok(VERIFY_WRITE, up64, sizeof(*up64))) {
@@ -815,10 +816,10 @@ do_sys32_msgctl (int first, int second, void *uptr)
}
static int
-do_sys32_shmat (int first, int second, int third, int version, void *uptr)
+do_sys32_shmat (int first, int second, int third, int version, void __user *uptr)
{
unsigned long raddr;
- u32 *uaddr = (u32 *)A((u32)third);
+ u32 __user *uaddr = (u32 __user *)A((u32)third);
int err = -EINVAL;
if (version == 1)
@@ -837,11 +838,11 @@ struct shm_info32 {
};
static int
-do_sys32_shmctl (int first, int second, void *uptr)
+do_sys32_shmctl (int first, int second, void __user *uptr)
{
- struct shmid64_ds32 *up64 = (struct shmid64_ds32 *)uptr;
- struct shmid_ds32 *up32 = (struct shmid_ds32 *)uptr;
- struct shm_info32 *uip = (struct shm_info32 *)uptr;
+ struct shmid64_ds32 __user *up64 = (struct shmid64_ds32 __user *)uptr;
+ struct shmid_ds32 __user *up32 = (struct shmid_ds32 __user *)uptr;
+ struct shm_info32 __user *uip = (struct shm_info32 __user *)uptr;
int err = -EFAULT, err2;
struct shmid64_ds s64;
mm_segment_t old_fs;
@@ -854,7 +855,7 @@ do_sys32_shmctl (int first, int second, void *uptr)
case IPC_RMID:
case SHM_LOCK:
case SHM_UNLOCK:
- err = sys_shmctl(first, second, (struct shmid_ds *)uptr);
+ err = sys_shmctl(first, second, (struct shmid_ds __user *)uptr);
break;
case IPC_SET:
if (second & IPC_64) {
@@ -870,7 +871,7 @@ do_sys32_shmctl (int first, int second, void *uptr)
break;
old_fs = get_fs();
set_fs(KERNEL_DS);
- err = sys_shmctl(first, second & ~IPC_64, &s);
+ err = sys_shmctl(first, second & ~IPC_64, (struct shmid_ds __user *)&s);
set_fs(old_fs);
break;
@@ -878,7 +879,7 @@ do_sys32_shmctl (int first, int second, void *uptr)
case SHM_STAT:
old_fs = get_fs();
set_fs(KERNEL_DS);
- err = sys_shmctl(first, second | IPC_64, (void *) &s64);
+ err = sys_shmctl(first, second | IPC_64, (void __user *) &s64);
set_fs(old_fs);
if (err < 0)
break;
@@ -928,7 +929,7 @@ do_sys32_shmctl (int first, int second, void *uptr)
case SHM_INFO:
old_fs = get_fs();
set_fs(KERNEL_DS);
- err = sys_shmctl(first, second, (void *)&si);
+ err = sys_shmctl(first, second, (void __user *)&si);
set_fs(old_fs);
if (err < 0)
break;
@@ -950,11 +951,11 @@ do_sys32_shmctl (int first, int second, void *uptr)
return err;
}
-static int sys32_semtimedop(int semid, struct sembuf *tsems, int nsems,
- const struct compat_timespec *timeout32)
+static int sys32_semtimedop(int semid, struct sembuf __user *tsems, int nsems,
+ const struct compat_timespec __user *timeout32)
{
struct compat_timespec t32;
- struct timespec *t64 = compat_alloc_user_space(sizeof(*t64));
+ struct timespec __user *t64 = compat_alloc_user_space(sizeof(*t64));
if (copy_from_user(&t32, timeout32, sizeof(t32)))
return -EFAULT;
@@ -977,11 +978,11 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
switch (call) {
case SEMOP:
/* struct sembuf is the same on 32 and 64bit :)) */
- err = sys_semtimedop (first, (struct sembuf *)AA(ptr), second,
+ err = sys_semtimedop (first, (struct sembuf __user *)AA(ptr), second,
NULL);
break;
case SEMTIMEDOP:
- err = sys32_semtimedop (first, (struct sembuf *)AA(ptr), second,
+ err = sys32_semtimedop (first, (struct sembuf __user *)AA(ptr), second,
(const struct compat_timespec __user *)AA(fifth));
break;
case SEMGET:
@@ -989,36 +990,36 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
break;
case SEMCTL:
err = do_sys32_semctl (first, second, third,
- (void *)AA(ptr));
+ (void __user *)AA(ptr));
break;
case MSGSND:
err = do_sys32_msgsnd (first, second, third,
- (void *)AA(ptr));
+ (void __user *)AA(ptr));
break;
case MSGRCV:
err = do_sys32_msgrcv (first, second, fifth, third,
- version, (void *)AA(ptr));
+ version, (void __user *)AA(ptr));
break;
case MSGGET:
err = sys_msgget ((key_t) first, second);
break;
case MSGCTL:
- err = do_sys32_msgctl (first, second, (void *)AA(ptr));
+ err = do_sys32_msgctl (first, second, (void __user *)AA(ptr));
break;
case SHMAT:
err = do_sys32_shmat (first, second, third,
- version, (void *)AA(ptr));
+ version, (void __user *)AA(ptr));
break;
case SHMDT:
- err = sys_shmdt ((char *)A(ptr));
+ err = sys_shmdt ((char __user *)A(ptr));
break;
case SHMGET:
err = sys_shmget (first, (unsigned)second, third);
break;
case SHMCTL:
- err = do_sys32_shmctl (first, second, (void *)AA(ptr));
+ err = do_sys32_shmctl (first, second, (void __user *)AA(ptr));
break;
default:
err = -EINVAL;
@@ -1029,7 +1030,7 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
}
asmlinkage long sys32_shmat(int shmid, char __user *shmaddr,
- int shmflg, int32_t *addr)
+ int shmflg, int32_t __user *addr)
{
unsigned long raddr;
int err;
@@ -1054,12 +1055,13 @@ struct sysctl_args32
#ifdef CONFIG_SYSCTL
-asmlinkage long sys32_sysctl(struct sysctl_args32 *args)
+asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
{
struct sysctl_args32 tmp;
int error;
- size_t oldlen, *oldlenp = NULL;
- unsigned long addr = (((long)&args->__unused[0]) + 7) & ~7;
+ size_t oldlen;
+ size_t __user *oldlenp = NULL;
+ unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
@@ -1071,20 +1073,20 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 *args)
basically copy the whole sysctl.c here, and
glibc's __sysctl uses rw memory for the structure
anyway. */
- if (get_user(oldlen, (u32 *)A(tmp.oldlenp)) ||
- put_user(oldlen, (size_t *)addr))
+ if (get_user(oldlen, (u32 __user *)A(tmp.oldlenp)) ||
+ put_user(oldlen, (size_t __user *)addr))
return -EFAULT;
- oldlenp = (size_t *)addr;
+ oldlenp = (size_t __user *)addr;
}
lock_kernel();
- error = do_sysctl((int *)A(tmp.name), tmp.nlen, (void *)A(tmp.oldval),
- oldlenp, (void *)A(tmp.newval), tmp.newlen);
+ error = do_sysctl((int __user *)A(tmp.name), tmp.nlen, (void __user *)A(tmp.oldval),
+ oldlenp, (void __user *)A(tmp.newval), tmp.newlen);
unlock_kernel();
if (oldlenp) {
if (!error) {
- if (get_user(oldlen, (size_t *)addr) ||
- put_user(oldlen, (u32 *)A(tmp.oldlenp)))
+ if (get_user(oldlen, (size_t __user *)addr) ||
+ put_user(oldlen, (u32 __user *)A(tmp.oldlenp)))
error = -EFAULT;
}
copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused));
@@ -1094,7 +1096,7 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 *args)
#endif /* CONFIG_SYSCTL */
-asmlinkage long sys32_newuname(struct new_utsname * name)
+asmlinkage long sys32_newuname(struct new_utsname __user * name)
{
int ret = 0;
@@ -1129,9 +1131,9 @@ struct ustat32 {
char f_fpack[6];
};
-extern asmlinkage long sys_ustat(dev_t dev, struct ustat * ubuf);
+extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
-asmlinkage int sys32_ustat(dev_t dev, struct ustat32 * ubuf32)
+asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
{
int err;
struct ustat tmp;
@@ -1139,7 +1141,7 @@ asmlinkage int sys32_ustat(dev_t dev, struct ustat32 * ubuf32)
mm_segment_t old_fs = get_fs();
set_fs(KERNEL_DS);
- err = sys_ustat(dev, &tmp);
+ err = sys_ustat(dev, (struct ustat __user *)&tmp);
set_fs (old_fs);
if (err)
@@ -1172,7 +1174,7 @@ struct timex32 {
extern int do_adjtimex(struct timex *);
-asmlinkage int sys32_adjtimex(struct timex32 *utp)
+asmlinkage int sys32_adjtimex(struct timex32 __user *utp)
{
struct timex txc;
int ret;
@@ -1228,7 +1230,7 @@ asmlinkage int sys32_adjtimex(struct timex32 *utp)
return ret;
}
-asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset,
+asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
s32 count)
{
mm_segment_t old_fs = get_fs();
@@ -1239,7 +1241,7 @@ asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset,
return -EFAULT;
set_fs(KERNEL_DS);
- ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count);
+ ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL, count);
set_fs(old_fs);
if (offset && put_user(of, offset))
@@ -1269,7 +1271,7 @@ static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
* it is set by the callees.
*/
-asmlinkage long sys32_socketcall(int call, unsigned int *args32)
+asmlinkage long sys32_socketcall(int call, unsigned int __user *args32)
{
unsigned int a[6];
unsigned int a0,a1;
@@ -1291,7 +1293,7 @@ asmlinkage long sys32_socketcall(int call, unsigned int *args32)
struct sockaddr __user *addr, int __user *addr_len);
extern asmlinkage long sys_shutdown(int fd, int how);
extern asmlinkage long sys_setsockopt(int fd, int level, int optname, char __user *optval, int optlen);
- extern asmlinkage long sys_getsockopt(int fd, int level, int optname, char __user *optval, int *optlen);
+ extern asmlinkage long sys_getsockopt(int fd, int level, int optname, char __user *optval, int __user *optlen);
extern asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
extern asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned int flags);
@@ -1411,7 +1413,7 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs)
newsp = regs.regs[5];
if (!newsp)
newsp = regs.regs[29];
- parent_tidptr = (int *) regs.regs[6];
+ parent_tidptr = (int __user *) regs.regs[6];
/* Use __dummy4 instead of getting it off the stack, so that
syscall() works. */
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 86fe15b273cd..84ab959f924a 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -135,6 +135,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
cpu_has_vce ? "%u" : "not available");
seq_printf(m, fmt, 'D', vced_count);
seq_printf(m, fmt, 'I', vcei_count);
+ seq_printf(m, "\n");
return 0;
}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 092679c2dca9..a8f435d82940 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -60,17 +60,9 @@ ATTRIB_NORET void cpu_idle(void)
}
}
-extern void do_signal(struct pt_regs *regs);
-extern void do_signal32(struct pt_regs *regs);
-
/*
* Native o32 and N64 ABI without DSP ASE
*/
-extern int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set);
-extern int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set, siginfo_t *info);
-
struct mips_abi mips_abi = {
.do_signal = do_signal,
#ifdef CONFIG_TRAD_SIGNALS
@@ -83,11 +75,6 @@ struct mips_abi mips_abi = {
/*
* o32 compatibility on 64-bit kernels, without DSP ASE
*/
-extern int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set);
-extern int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set, siginfo_t *info);
-
struct mips_abi mips_abi_32 = {
.do_signal = do_signal32,
.setup_frame = setup_frame_32,
@@ -99,9 +86,6 @@ struct mips_abi mips_abi_32 = {
/*
* N32 on 64-bit kernels, without DSP ASE
*/
-extern int setup_rt_frame_n32(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set, siginfo_t *info);
-
struct mips_abi mips_abi_n32 = {
.do_signal = do_signal,
.setup_rt_frame = setup_rt_frame_n32
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index d9293c558e41..0cb3b6097e0e 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -447,21 +447,10 @@ static inline void resource_init(void)
{
int i;
-#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
- /*
- * The 64bit code in 32bit object format trick can't represent
- * 64bit wide relocations for linker script symbols.
- */
- code_resource.start = CPHYSADDR(&_text);
- code_resource.end = CPHYSADDR(&_etext) - 1;
- data_resource.start = CPHYSADDR(&_etext);
- data_resource.end = CPHYSADDR(&_edata) - 1;
-#else
code_resource.start = virt_to_phys(&_text);
code_resource.end = virt_to_phys(&_etext) - 1;
data_resource.start = virt_to_phys(&_etext);
data_resource.end = virt_to_phys(&_edata) - 1;
-#endif
/*
* Request address space for all standard RAM.
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 36bfc2588aa3..3ca786215d48 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -166,11 +166,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
sp = regs->regs[29];
/*
- * FPU emulator may have it's own trampoline active just
- * above the user stack, 16-bytes before the next lowest
- * 16 byte boundary. Try to avoid trashing it.
- */
- sp -= 32;
+ * FPU emulator may have it's own trampoline active just
+ * above the user stack, 16-bytes before the next lowest
+ * 16 byte boundary. Try to avoid trashing it.
+ */
+ sp -= 32;
/* This is the X/Open sanctioned signal stack switching. */
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index c974cc9b30eb..402efd27c79e 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -100,8 +100,8 @@ _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
}
#ifdef CONFIG_TRAD_SIGNALS
-asmlinkage int sys_sigaction(int sig, const struct sigaction *act,
- struct sigaction *oact)
+asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
+ struct sigaction __user *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
@@ -331,7 +331,7 @@ int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
/* Create the ucontext. */
err |= __put_user(0, &frame->rs_uc.uc_flags);
err |= __put_user(NULL, &frame->rs_uc.uc_link);
- err |= __put_user((void *)current->sas_ss_sp,
+ err |= __put_user((void __user *)current->sas_ss_sp,
&frame->rs_uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->regs[29]),
&frame->rs_uc.uc_stack.ss_flags);
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 237cd8a2cd32..f32a22997c3d 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -163,7 +163,7 @@ static inline int put_sigset(const sigset_t *kbuf, compat_sigset_t __user *ubuf)
return err;
}
-static inline int get_sigset(sigset_t *kbuf, const compat_sigset_t *ubuf)
+static inline int get_sigset(sigset_t *kbuf, const compat_sigset_t __user *ubuf)
{
int err = 0;
unsigned long sig[4];
@@ -195,10 +195,10 @@ save_static_function(sys32_sigsuspend);
__attribute_used__ noinline static int
_sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- compat_sigset_t *uset;
+ compat_sigset_t __user *uset;
sigset_t newset;
- uset = (compat_sigset_t *) regs.regs[4];
+ uset = (compat_sigset_t __user *) regs.regs[4];
if (get_sigset(&newset, uset))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -219,7 +219,7 @@ save_static_function(sys32_rt_sigsuspend);
__attribute_used__ noinline static int
_sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- compat_sigset_t *uset;
+ compat_sigset_t __user *uset;
sigset_t newset;
size_t sigsetsize;
@@ -228,7 +228,7 @@ _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
if (sigsetsize != sizeof(compat_sigset_t))
return -EINVAL;
- uset = (compat_sigset_t *) regs.regs[4];
+ uset = (compat_sigset_t __user *) regs.regs[4];
if (get_sigset(&newset, uset))
return -EFAULT;
sigdelsetmask(&newset, ~_BLOCKABLE);
@@ -236,7 +236,7 @@ _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
spin_lock_irq(¤t->sighand->siglock);
current->saved_sigmask = current->blocked;
current->blocked = newset;
- recalc_sigpending();
+ recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
current->state = TASK_INTERRUPTIBLE;
@@ -245,8 +245,8 @@ _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
return -ERESTARTNOHAND;
}
-asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act,
- struct sigaction32 *oact)
+asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act,
+ struct sigaction32 __user *oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
@@ -272,15 +272,15 @@ asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act,
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
- return -EFAULT;
+ return -EFAULT;
err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
err |= __put_user((u32)(u64)old_ka.sa.sa_handler,
&oact->sa_handler);
err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig);
- err |= __put_user(0, &oact->sa_mask.sig[1]);
- err |= __put_user(0, &oact->sa_mask.sig[2]);
- err |= __put_user(0, &oact->sa_mask.sig[3]);
- if (err)
+ err |= __put_user(0, &oact->sa_mask.sig[1]);
+ err |= __put_user(0, &oact->sa_mask.sig[2]);
+ err |= __put_user(0, &oact->sa_mask.sig[3]);
+ if (err)
return -EFAULT;
}
@@ -301,7 +301,7 @@ asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs)
if (!access_ok(VERIFY_READ, uss, sizeof(*uss)))
return -EFAULT;
err |= __get_user(sp, &uss->ss_sp);
- kss.ss_sp = (void *) (long) sp;
+ kss.ss_sp = (void __user *) (long) sp;
err |= __get_user(kss.ss_size, &uss->ss_size);
err |= __get_user(kss.ss_flags, &uss->ss_flags);
if (err)
@@ -316,7 +316,7 @@ asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs)
if (!ret && uoss) {
if (!access_ok(VERIFY_WRITE, uoss, sizeof(*uoss)))
return -EFAULT;
- sp = (int) (long) koss.ss_sp;
+ sp = (int) (unsigned long) koss.ss_sp;
err |= __put_user(sp, &uoss->ss_sp);
err |= __put_user(koss.ss_size, &uoss->ss_size);
err |= __put_user(koss.ss_flags, &uoss->ss_flags);
@@ -527,7 +527,7 @@ _sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
/* The ucontext contains a stack32_t, so we must convert! */
if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
goto badframe;
- st.ss_sp = (void *)(long) sp;
+ st.ss_sp = (void __user *)(long) sp;
if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size))
goto badframe;
if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags))
@@ -624,11 +624,11 @@ static inline void __user *get_sigframe(struct k_sigaction *ka,
sp = regs->regs[29];
/*
- * FPU emulator may have it's own trampoline active just
- * above the user stack, 16-bytes before the next lowest
- * 16 byte boundary. Try to avoid trashing it.
- */
- sp -= 32;
+ * FPU emulator may have it's own trampoline active just
+ * above the user stack, 16-bytes before the next lowest
+ * 16 byte boundary. Try to avoid trashing it.
+ */
+ sp -= 32;
/* This is the X/Open sanctioned signal stack switching. */
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
@@ -868,7 +868,7 @@ no_signal:
}
}
-asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act,
+asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
struct sigaction32 __user *oact,
unsigned int sigsetsize)
{
@@ -912,7 +912,7 @@ out:
return ret;
}
-asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t *set,
+asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
compat_sigset_t __user *oset, unsigned int sigsetsize)
{
sigset_t old_set, new_set;
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 3e168c08a3a8..477c5334ec1b 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -87,7 +87,8 @@ save_static_function(sysn32_rt_sigsuspend);
__attribute_used__ noinline static int
_sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
{
- compat_sigset_t __user *unewset, uset;
+ compat_sigset_t __user *unewset;
+ compat_sigset_t uset;
size_t sigsetsize;
sigset_t newset;
@@ -141,7 +142,7 @@ _sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
/* The ucontext contains a stack32_t, so we must convert! */
if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
goto badframe;
- st.ss_sp = (void *)(long) sp;
+ st.ss_sp = (void __user *)(long) sp;
if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size))
goto badframe;
if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags))
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 1da2eeb3ef9e..2aeaa2fd4b32 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -162,7 +162,10 @@ asmlinkage unsigned long
sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
unsigned long flags, unsigned long fd, unsigned long pgoff)
{
- return do_mmap2(addr, len, prot, flags, fd, pgoff);
+ if (pgoff & (~PAGE_MASK >> 12))
+ return -EINVAL;
+
+ return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12));
}
save_static_function(sys_fork);
@@ -345,7 +348,7 @@ asmlinkage int sys_ipc (uint call, int first, int second,
union semun fourth;
if (!ptr)
return -EINVAL;
- if (get_user(fourth.__pad, (void *__user *) ptr))
+ if (get_user(fourth.__pad, (void __user *__user *) ptr))
return -EFAULT;
return sys_semctl (first, second, third, fourth);
}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 005debbfbe84..bed0eb6cf55d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -576,7 +576,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
}
#endif
/*
- * Unimplemented operation exception. If we've got the full
+ * Unimplemented operation exception. If we've got the full
* software emulator on-board, let's use it...
*
* Force FPU to dump state into task/thread context. We're
diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal
index ca22336f6c36..988f8ad189cb 100644
--- a/arch/mips/lasat/image/romscript.normal
+++ b/arch/mips/lasat/image/romscript.normal
@@ -16,7 +16,8 @@ SECTIONS
_image_start = ADDR(.data);
_image_size = SIZEOF(.data);
- .other : {
- *(.*)
+ .other :
+ {
+ *(.*)
}
}
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index a397ecb872d6..ddd5c73a2971 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -98,7 +98,7 @@
and s0, s1
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- .set mips32
+ .set mips32
clz a0, s0
.set mips0
negu a0
diff --git a/arch/mips/mips-boards/sim/sim_IRQ.c b/arch/mips/mips-boards/sim/sim_IRQ.c
index 9987a85aabeb..5b84c7fe1022 100644
--- a/arch/mips/mips-boards/sim/sim_IRQ.c
+++ b/arch/mips/mips-boards/sim/sim_IRQ.c
@@ -96,7 +96,7 @@
andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
#else
beq a0, zero, 1f # delay slot, check hw3 interrupt
- andi a0, s0, CAUSEF_IP5
+ andi a0, s0, CAUSEF_IP5
#endif
/* Wheee, combined hardware level zero interrupt. */
diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S
index 835f0387fcd4..da52297a2216 100644
--- a/arch/mips/mips-boards/sim/sim_irq.S
+++ b/arch/mips/mips-boards/sim/sim_irq.S
@@ -42,7 +42,7 @@
and s0, s1
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- .set mips32
+ .set mips32
clz a0, s0
.set mips0
negu a0
diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c
index 19824359f5de..a9f0c2bfe4ad 100644
--- a/arch/mips/mips-boards/sim/sim_smp.c
+++ b/arch/mips/mips-boards/sim/sim_smp.c
@@ -115,7 +115,7 @@ void prom_prepare_cpus(unsigned int max_cpus)
#ifdef CONFIG_MIPS_MT_SMTC
void mipsmt_prepare_cpus(int c);
/*
- * As noted above, we can assume a single CPU for now
+ * As noted above, we can assume a single CPU for now
* but it may be multithreaded.
*/
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b0178da019f0..4a6220116c96 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_MIPS64) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_NEVADA) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_R10000) += c-r4k.o cex-gen.o pg-r4k.o tlb-andes.o
+obj-$(CONFIG_CPU_R10000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R3000) += c-r3k.o tlb-r3k.o pg-r4k.o
obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 27f4fa25e8c9..9dd1352d5748 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -129,7 +129,7 @@ static void r3k_flush_icache_range(unsigned long start, unsigned long end)
"sb\t$0, 0x014(%0)\n\t"
"sb\t$0, 0x018(%0)\n\t"
"sb\t$0, 0x01c(%0)\n\t"
- "sb\t$0, 0x020(%0)\n\t"
+ "sb\t$0, 0x020(%0)\n\t"
"sb\t$0, 0x024(%0)\n\t"
"sb\t$0, 0x028(%0)\n\t"
"sb\t$0, 0x02c(%0)\n\t"
@@ -145,7 +145,7 @@ static void r3k_flush_icache_range(unsigned long start, unsigned long end)
"sb\t$0, 0x054(%0)\n\t"
"sb\t$0, 0x058(%0)\n\t"
"sb\t$0, 0x05c(%0)\n\t"
- "sb\t$0, 0x060(%0)\n\t"
+ "sb\t$0, 0x060(%0)\n\t"
"sb\t$0, 0x064(%0)\n\t"
"sb\t$0, 0x068(%0)\n\t"
"sb\t$0, 0x06c(%0)\n\t"
@@ -182,31 +182,31 @@ static void r3k_flush_dcache_range(unsigned long start, unsigned long end)
"sb\t$0, 0x004(%0)\n\t"
"sb\t$0, 0x008(%0)\n\t"
"sb\t$0, 0x00c(%0)\n\t"
- "sb\t$0, 0x010(%0)\n\t"
+ "sb\t$0, 0x010(%0)\n\t"
"sb\t$0, 0x014(%0)\n\t"
"sb\t$0, 0x018(%0)\n\t"
"sb\t$0, 0x01c(%0)\n\t"
- "sb\t$0, 0x020(%0)\n\t"
+ "sb\t$0, 0x020(%0)\n\t"
"sb\t$0, 0x024(%0)\n\t"
"sb\t$0, 0x028(%0)\n\t"
"sb\t$0, 0x02c(%0)\n\t"
- "sb\t$0, 0x030(%0)\n\t"
+ "sb\t$0, 0x030(%0)\n\t"
"sb\t$0, 0x034(%0)\n\t"
"sb\t$0, 0x038(%0)\n\t"
"sb\t$0, 0x03c(%0)\n\t"
- "sb\t$0, 0x040(%0)\n\t"
+ "sb\t$0, 0x040(%0)\n\t"
"sb\t$0, 0x044(%0)\n\t"
"sb\t$0, 0x048(%0)\n\t"
"sb\t$0, 0x04c(%0)\n\t"
- "sb\t$0, 0x050(%0)\n\t"
+ "sb\t$0, 0x050(%0)\n\t"
"sb\t$0, 0x054(%0)\n\t"
"sb\t$0, 0x058(%0)\n\t"
"sb\t$0, 0x05c(%0)\n\t"
- "sb\t$0, 0x060(%0)\n\t"
+ "sb\t$0, 0x060(%0)\n\t"
"sb\t$0, 0x064(%0)\n\t"
"sb\t$0, 0x068(%0)\n\t"
"sb\t$0, 0x06c(%0)\n\t"
- "sb\t$0, 0x070(%0)\n\t"
+ "sb\t$0, 0x070(%0)\n\t"
"sb\t$0, 0x074(%0)\n\t"
"sb\t$0, 0x078(%0)\n\t"
"sb\t$0, 0x07c(%0)\n\t"
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 9572ed44f0d5..32b7f6aeb983 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -786,6 +786,7 @@ static void __init probe_pcache(void)
c->dcache.waybit = 0;
c->options |= MIPS_CPU_CACHE_CDEX_P;
+ c->options |= MIPS_CPU_PREFETCH;
break;
case CPU_R4000PC:
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index f51e180072e3..e4390dc3eb48 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -124,7 +124,7 @@ static inline void build_nop(void)
static inline void build_src_pref(int advance)
{
- if (!(load_offset & (cpu_dcache_line_size() - 1))) {
+ if (!(load_offset & (cpu_dcache_line_size() - 1)) && advance) {
union mips_instruction mi;
mi.i_format.opcode = pref_op;
@@ -166,7 +166,7 @@ static inline void build_load_reg(int reg)
static inline void build_dst_pref(int advance)
{
- if (!(store_offset & (cpu_dcache_line_size() - 1))) {
+ if (!(store_offset & (cpu_dcache_line_size() - 1)) && advance) {
union mips_instruction mi;
mi.i_format.opcode = pref_op;
@@ -340,6 +340,12 @@ void __init build_clear_page(void)
if (cpu_has_prefetch) {
switch (current_cpu_data.cputype) {
+ case CPU_TX49XX:
+ /* TX49 supports only Pref_Load */
+ pref_offset_clear = 0;
+ pref_offset_copy = 0;
+ break;
+
case CPU_RM9000:
/*
* As a workaround for erratum G105 which make the
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 9e8ff8badb19..3b6cc9ba1b05 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -9,6 +9,7 @@
#include
#include
#include
+#include
#include
#include
@@ -43,14 +44,7 @@ static void rm7k_sc_wback_inv(unsigned long addr, unsigned long size)
/* Catch bad driver code */
BUG_ON(size == 0);
- a = addr & ~(sc_lsize - 1);
- end = (addr + size - 1) & ~(sc_lsize - 1);
- while (1) {
- flush_scache_line(a); /* Hit_Writeback_Inv_SD */
- if (a == end)
- break;
- a += sc_lsize;
- }
+ blast_scache_range(addr, addr + size);
if (!rm7k_tcache_enabled)
return;
@@ -74,14 +68,7 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size)
/* Catch bad driver code */
BUG_ON(size == 0);
- a = addr & ~(sc_lsize - 1);
- end = (addr + size - 1) & ~(sc_lsize - 1);
- while (1) {
- invalidate_scache_line(a); /* Hit_Invalidate_SD */
- if (a == end)
- break;
- a += sc_lsize;
- }
+ blast_inv_scache_range(addr, addr + size);
if (!rm7k_tcache_enabled)
return;
@@ -143,11 +130,17 @@ struct bcache_ops rm7k_sc_ops = {
void __init rm7k_sc_init(void)
{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int config = read_c0_config();
if ((config & RM7K_CONF_SC))
return;
+ c->scache.linesz = sc_lsize;
+ c->scache.ways = 4;
+ c->scache.waybit= ffs(scache_size / c->scache.ways) - 1;
+ c->scache.waysize = scache_size / c->scache.ways;
+ c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways);
printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
(scache_size >> 10), sc_lsize);
diff --git a/arch/mips/mm/tlb-andes.c b/arch/mips/mm/tlb-andes.c
deleted file mode 100644
index 3f422a849c41..000000000000
--- a/arch/mips/mm/tlb-andes.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1997, 1998, 1999 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 1999 Silicon Graphics, Inc.
- * Copyright (C) 2000 Kanoj Sarcar (kanoj@sgi.com)
- */
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-extern void build_tlb_refill_handler(void);
-
-#define NTLB_ENTRIES 64
-#define NTLB_ENTRIES_HALF 32
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags;
- unsigned long old_ctx;
- unsigned long entry;
-
- local_irq_save(flags);
- /* Save old context and create impossible VPN2 value */
- old_ctx = read_c0_entryhi() & ASID_MASK;
- write_c0_entryhi(CKSEG0);
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
-
- entry = read_c0_wired();
-
- /* Blast 'em all away. */
- while (entry < NTLB_ENTRIES) {
- write_c0_index(entry);
- tlb_write_indexed();
- entry++;
- }
- write_c0_entryhi(old_ctx);
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
- int cpu = smp_processor_id();
- if (cpu_context(cpu, mm) != 0) {
- drop_mmu_context(mm,cpu);
- }
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
- int cpu = smp_processor_id();
-
- if (cpu_context(cpu, mm) != 0) {
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- size = (size + 1) >> 1;
- if (size <= NTLB_ENTRIES_HALF) {
- int oldpid = (read_c0_entryhi() & ASID_MASK);
- int newpid = (cpu_context(smp_processor_id(), mm)
- & ASID_MASK);
-
- start &= (PAGE_MASK << 1);
- end += ((PAGE_SIZE << 1) - 1);
- end &= (PAGE_MASK << 1);
- while(start < end) {
- int idx;
-
- write_c0_entryhi(start | newpid);
- start += (PAGE_SIZE << 1);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- write_c0_entryhi(CKSEG0);
- if(idx < 0)
- continue;
- tlb_write_indexed();
- }
- write_c0_entryhi(oldpid);
- } else {
- drop_mmu_context(mm, cpu);
- }
- local_irq_restore(flags);
- }
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- unsigned long flags;
- int size;
-
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- size = (size + 1) >> 1;
-
- local_irq_save(flags);
- if (size <= NTLB_ENTRIES_HALF) {
- int pid = read_c0_entryhi();
-
- start &= (PAGE_MASK << 1);
- end += ((PAGE_SIZE << 1) - 1);
- end &= (PAGE_MASK << 1);
-
- while (start < end) {
- int idx;
-
- write_c0_entryhi(start);
- start += (PAGE_SIZE << 1);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT+1)));
- if (idx < 0)
- continue;
- tlb_write_indexed();
- }
- write_c0_entryhi(pid);
- } else {
- local_flush_tlb_all();
- }
- local_irq_restore(flags);
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- if (cpu_context(smp_processor_id(), vma->vm_mm) != 0) {
- unsigned long flags;
- int oldpid, newpid, idx;
-
- newpid = (cpu_context(smp_processor_id(), vma->vm_mm) &
- ASID_MASK);
- page &= (PAGE_MASK << 1);
- local_irq_save(flags);
- oldpid = (read_c0_entryhi() & ASID_MASK);
- write_c0_entryhi(page | newpid);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- write_c0_entryhi(CKSEG0);
- if (idx < 0)
- goto finish;
- tlb_write_indexed();
-
- finish:
- write_c0_entryhi(oldpid);
- local_irq_restore(flags);
- }
-}
-
-/*
- * This one is only used for pages with the global bit set so we don't care
- * much about the ASID.
- */
-void local_flush_tlb_one(unsigned long page)
-{
- unsigned long flags;
- int oldpid, idx;
-
- local_irq_save(flags);
- page &= (PAGE_MASK << 1);
- oldpid = read_c0_entryhi() & 0xff;
- write_c0_entryhi(page);
- tlb_probe();
- idx = read_c0_index();
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- if (idx >= 0) {
- /* Make sure all entries differ. */
- write_c0_entryhi(CKSEG0+(idx<<(PAGE_SHIFT+1)));
- tlb_write_indexed();
- }
- write_c0_entryhi(oldpid);
-
- local_irq_restore(flags);
-}
-
-/* XXX Simplify this. On the R10000 writing a TLB entry for an virtual
- address that already exists will overwrite the old entry and not result
- in TLB malfunction or TLB shutdown. */
-void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
-{
- unsigned long flags;
- pgd_t *pgdp;
- pud_t *pudp;
- pmd_t *pmdp;
- pte_t *ptep;
- int idx, pid;
-
- /*
- * Handle debugger faulting in for debugee.
- */
- if (current->active_mm != vma->vm_mm)
- return;
-
- pid = read_c0_entryhi() & ASID_MASK;
-
- if ((pid != (cpu_context(smp_processor_id(), vma->vm_mm) & ASID_MASK))
- || (cpu_context(smp_processor_id(), vma->vm_mm) == 0)) {
- printk(KERN_WARNING
- "%s: Wheee, bogus tlbpid mmpid=%d tlbpid=%d\n",
- __FUNCTION__, (int) (cpu_context(smp_processor_id(),
- vma->vm_mm) & ASID_MASK), pid);
- }
-
- local_irq_save(flags);
- address &= (PAGE_MASK << 1);
- write_c0_entryhi(address | (pid));
- pgdp = pgd_offset(vma->vm_mm, address);
- tlb_probe();
- pudp = pud_offset(pgdp, address);
- pmdp = pmd_offset(pudp, address);
- idx = read_c0_index();
- ptep = pte_offset_map(pmdp, address);
- write_c0_entrylo0(pte_val(*ptep++) >> 6);
- write_c0_entrylo1(pte_val(*ptep) >> 6);
- write_c0_entryhi(address | pid);
- if (idx < 0) {
- tlb_write_random();
- } else {
- tlb_write_indexed();
- }
- write_c0_entryhi(pid);
- local_irq_restore(flags);
-}
-
-void __init tlb_init(void)
-{
- /*
- * You should never change this register:
- * - On R4600 1.7 the tlbp never hits for pages smaller than
- * the value in the c0_pagemask register.
- * - The entire mm handling assumes the c0_pagemask register to
- * be set for 4kb pages.
- */
- write_c0_pagemask(PM_4K);
- write_c0_wired(0);
- write_c0_framemask(0);
-
- /* From this point on the ARC firmware is dead. */
- local_flush_tlb_all();
-
- /* Did I tell you that ARC SUCKS? */
-
- build_tlb_refill_handler();
-}
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 8297970f0bb1..a865f2394cb0 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -424,8 +424,13 @@ void __init tlb_init(void)
probe_tlb(config);
write_c0_pagemask(PM_DEFAULT_MASK);
write_c0_wired(0);
+ write_c0_framemask(0);
temp_tlb_entry = current_cpu_data.tlbsize - 1;
+
+ /* From this point on the ARC firmware is dead. */
local_flush_tlb_all();
+ /* Did I tell you that ARC SUCKS? */
+
build_tlb_refill_handler();
}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index ac4f4bfaae50..599b3c297186 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -951,7 +951,6 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
/* No i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_SMP
-# ifdef CONFIG_BUILD_ELF64
/*
* 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
@@ -962,18 +961,6 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
i_daddu(p, ptr, ptr, tmp);
i_dmfc0(p, tmp, C0_BADVADDR);
i_ld(p, ptr, rel_lo(pgdc), ptr);
-# else
- /*
- * 64 bit SMP running in compat space has the lower part of
- * &pgd_current[smp_processor_id()] stored in CONTEXT.
- */
- if (!in_compat_space_p(pgdc))
- panic("Invalid page directory address!");
-
- i_dmfc0(p, ptr, C0_CONTEXT);
- i_dsra(p, ptr, ptr, 23);
- i_ld(p, ptr, 0, ptr);
-# endif
#else
i_LA_mostly(p, ptr, pgdc);
i_ld(p, ptr, rel_lo(pgdc), ptr);
diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c
index c4236b1e59fa..ce9fb2e3d952 100644
--- a/arch/mips/momentum/jaguar_atx/reset.c
+++ b/arch/mips/momentum/jaguar_atx/reset.c
@@ -32,7 +32,7 @@ void momenco_jaguar_restart(char *command)
#else
void *nvram = (void*) 0xfc807000;
#endif
- /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
+ /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
writeb(0x84, nvram + 0xff7);
/* wait for the watchdog to go off */
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 2699917b640a..3784c898db1a 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -461,7 +461,7 @@ void __init plat_setup(void)
unsigned int tbControl;
tbControl =
0 << 26 | /* post trigger delay 0 */
- 0x2 << 16 | /* sequential trace mode */
+ 0x2 << 16 | /* sequential trace mode */
// 0x0 << 16 | /* non-sequential trace mode */
// 0xf << 4 | /* watchpoints disabled */
2 << 2 | /* armed */
diff --git a/arch/mips/momentum/ocelot_3/reset.c b/arch/mips/momentum/ocelot_3/reset.c
index 72b4423c0864..9d86d2468376 100644
--- a/arch/mips/momentum/ocelot_3/reset.c
+++ b/arch/mips/momentum/ocelot_3/reset.c
@@ -34,7 +34,7 @@ void momenco_ocelot_restart(char *command)
/* base address of timekeeper portion of part */
void *nvram = (void *) 0xfc807000L;
- /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
+ /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
writeb(0x84, nvram + 0xff7);
/* wait for the watchdog to go off */
diff --git a/arch/mips/momentum/ocelot_c/reset.c b/arch/mips/momentum/ocelot_c/reset.c
index 6a2489f3b9a0..9dcd154c7767 100644
--- a/arch/mips/momentum/ocelot_c/reset.c
+++ b/arch/mips/momentum/ocelot_c/reset.c
@@ -34,7 +34,7 @@ void momenco_ocelot_restart(char *command)
0xfc807000;
#endif
- /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
+ /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
writeb(0x84, nvram + 0xff7);
/* wait for the watchdog to go off */
diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c
index 03a0ff2fc993..a8a47b494b23 100644
--- a/arch/mips/pci/fixup-vr4133.c
+++ b/arch/mips/pci/fixup-vr4133.c
@@ -45,7 +45,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
/*
* we have to open the bridges' windows down to 0 because otherwise
- * we cannot access ISA south bridge I/O registers that get mapped from
+ * we cannot access ISA south bridge I/O registers that get mapped from
* 0. for example, 8259 PIC would be unaccessible without that
*/
if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) {
diff --git a/arch/mips/pci/ops-ddb5477.c b/arch/mips/pci/ops-ddb5477.c
index 0406b50a37d8..8e57d4c5d90f 100644
--- a/arch/mips/pci/ops-ddb5477.c
+++ b/arch/mips/pci/ops-ddb5477.c
@@ -253,9 +253,9 @@ static int write_config_byte(struct pci_config_swap *swap,
static int prefix##_##rw##_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 star val) \
{ \
if (size == 1) \
- return rw##_config_byte(pciswap, bus, devfn, where, (u8 star)val); \
+ return rw##_config_byte(pciswap, bus, devfn, where, (u8 star)val); \
else if (size == 2) \
- return rw##_config_word(pciswap, bus, devfn, where, (u16 star)val); \
+ return rw##_config_word(pciswap, bus, devfn, where, (u16 star)val); \
/* Size must be 4 */ \
return rw##_config_dword(pciswap, bus, devfn, where, val); \
}
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
index 4c0dcfce5297..0ff083489efd 100644
--- a/arch/mips/pci/ops-tx4938.c
+++ b/arch/mips/pci/ops-tx4938.c
@@ -34,16 +34,16 @@ struct resource pci_mem_resource = {
};
struct resource tx4938_pcic1_pci_io_resource = {
- .name = "PCI1 IO",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IO
+ .name = "PCI1 IO",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO
};
struct resource tx4938_pcic1_pci_mem_resource = {
- .name = "PCI1 mem",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_MEM
+ .name = "PCI1 mem",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
};
static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index ca975e7d32ff..f4ef1a35ca18 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -100,7 +100,7 @@ static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
if (bus->number == 0) {
devno = PCI_SLOT(devfn);
- if (bcm1480_bus_status & PCI_DEVICE_MODE)
+ if (bcm1480_bus_status & PCI_DEVICE_MODE)
return 0;
else
return 1;
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index aca4a2e7a1c6..a3eebe5890a7 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -95,7 +95,7 @@ static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
if (bus->number == 0) {
devno = PCI_SLOT(devfn);
- if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+ if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
return 0;
}
return 1;
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index efc96ce99eeb..6002d2a6a262 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -379,18 +379,18 @@ int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid)
bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id);
/*
- * Clear all pending interrupts.
- */
+ * Clear all pending interrupts.
+ */
bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR;
/*
- * Until otherwise set up, assume all interrupts are from slot 0
- */
+ * Until otherwise set up, assume all interrupts are from slot 0
+ */
bridge->b_int_device = 0x0;
/*
- * swap pio's to pci mem and io space (big windows)
- */
+ * swap pio's to pci mem and io space (big windows)
+ */
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
index 546144988bf5..c500e2d41f2c 100644
--- a/arch/mips/philips/pnx8550/common/int.c
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -251,7 +251,7 @@ void __init arch_init_irq(void)
if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) {
/* PCI INT through gpio 8, which is setup in
* pnx8550_setup.c and routed to GPIO
- * Interrupt Level 0 (GPIO Connection 58).
+ * Interrupt Level 0 (GPIO Connection 58).
* Set it active low. */
PNX8550_GIC_REQ(gic_int_line) = 0x1E020000;
diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile
index 934944ab9e85..6a8e8bcef552 100644
--- a/arch/mips/qemu/Makefile
+++ b/arch/mips/qemu/Makefile
@@ -3,3 +3,5 @@
#
obj-y = q-firmware.o q-int.o q-irq.o q-mem.o q-setup.o
+
+obj-$(CONFIG_SMP) += q-smp.o
diff --git a/arch/mips/qemu/q-smp.c b/arch/mips/qemu/q-smp.c
new file mode 100644
index 000000000000..5a12354cd576
--- /dev/null
+++ b/arch/mips/qemu/q-smp.c
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Symmetric Uniprocessor (TM) Support
+ */
+#include
+#include
+
+/*
+ * Send inter-processor interrupt
+ */
+void core_send_ipi(int cpu, unsigned int action)
+{
+ panic(KERN_ERR "%s called", __FUNCTION__);
+}
+
+/*
+ * After we've done initial boot, this function is called to allow the
+ * board code to clean up state, if needed
+ */
+void prom_init_secondary(void)
+{
+}
+
+void prom_smp_finish(void)
+{
+}
+
+/* Hook for after all CPUs are online */
+void prom_cpus_done(void)
+{
+}
+
+void __init prom_prepare_cpus(unsigned int max_cpus)
+{
+ cpus_clear(phys_cpu_present_map);
+}
+
+/*
+ * Firmware CPU startup hook
+ */
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+}
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index ef20d9ac0ba3..ed93a9792959 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -540,8 +540,8 @@ void __init mem_init(void)
struct page *end, *p;
/*
- * This will free up the bootmem, ie, slot 0 memory.
- */
+ * This will free up the bootmem, ie, slot 0 memory.
+ */
totalram_pages += free_all_bootmem_node(NODE_DATA(node));
/*
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 2c38770b1e1b..2f50c79b7887 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -98,7 +98,7 @@ void __init plat_setup(void)
board_timer_setup = ip32_timer_setup;
#ifdef CONFIG_SERIAL_8250
- {
+ {
static struct uart_port o2_serial[2];
memset(o2_serial, 0, sizeof(o2_serial));
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
index e19e2be70f76..efe50562f0ce 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
@@ -70,10 +70,10 @@ void __init prom_init(void)
if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
mips_machtype = MACH_TOSHIBA_RBTX4927;
- toshiba_name = "TX4927";
+ toshiba_name = "TX4927";
} else {
mips_machtype = MACH_TOSHIBA_RBTX4937;
- toshiba_name = "TX4937";
+ toshiba_name = "TX4937";
}
msize = tx4927_get_mem_size();
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
index 5c7ace982a49..9166cd4557eb 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -684,7 +684,7 @@ void __init tx4938_board_setup(void)
for (i = 0; i < 8; i++) {
if (!(tx4938_ebuscptr->cr[i] & 0x8))
continue; /* disabled */
- rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
+ rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
}
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index de0c1b35f11c..ff272b2e8395 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -183,11 +183,11 @@ static inline unsigned long calculate_tclock(uint16_t clkspeed, unsigned long pc
switch (current_cpu_data.cputype) {
case CPU_VR4111:
if (!(clkspeed & DIV2B))
- tclock = pclock / 2;
+ tclock = pclock / 2;
else if (!(clkspeed & DIV3B))
- tclock = pclock / 3;
+ tclock = pclock / 3;
else if (!(clkspeed & DIV4B))
- tclock = pclock / 4;
+ tclock = pclock / 4;
break;
case CPU_VR4121:
tclock = pclock / DIVT(clkspeed);
diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S
index 5be05f47109e..5b2ffcc6e2b2 100644
--- a/arch/v850/kernel/vmlinux.lds.S
+++ b/arch/v850/kernel/vmlinux.lds.S
@@ -64,6 +64,10 @@
___start___ksymtab_gpl = .; \
*(__ksymtab_gpl) \
___stop___ksymtab_gpl = .; \
+ /* Kernel symbol table: GPL-future symbols */ \
+ ___start___ksymtab_gpl_future = .; \
+ *(__ksymtab_gpl_future) \
+ ___stop___ksymtab_gpl_future = .; \
/* Kernel symbol table: strings */ \
*(__ksymtab_strings) \
/* Kernel symbol table: Normal symbols */ \
@@ -74,6 +78,10 @@
___start___kcrctab_gpl = .; \
*(__kcrctab_gpl) \
___stop___kcrctab_gpl = .; \
+ /* Kernel symbol table: GPL-future symbols */ \
+ ___start___kcrctab_gpl_future = .; \
+ *(__kcrctab_gpl_future) \
+ ___stop___kcrctab_gpl_future = .; \
/* Built-in module parameters */ \
. = ALIGN (4) ; \
___start___param = .; \
diff --git a/arch/x86_64/crypto/aes.c b/arch/x86_64/crypto/aes.c
index fb1b961a2e2f..6f77e7700d32 100644
--- a/arch/x86_64/crypto/aes.c
+++ b/arch/x86_64/crypto/aes.c
@@ -77,12 +77,11 @@ static inline u8 byte(const u32 x, const unsigned n)
struct aes_ctx
{
u32 key_length;
- u32 E[60];
- u32 D[60];
+ u32 buf[120];
};
-#define E_KEY ctx->E
-#define D_KEY ctx->D
+#define E_KEY (&ctx->buf[0])
+#define D_KEY (&ctx->buf[60])
static u8 pow_tab[256] __initdata;
static u8 log_tab[256] __initdata;
diff --git a/block/genhd.c b/block/genhd.c
index db57546a709d..64510fd88621 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -15,12 +15,13 @@
#include
#include
#include
+#include
#define MAX_PROBE_HASH 255 /* random */
static struct subsystem block_subsys;
-static DECLARE_MUTEX(block_subsys_sem);
+static DEFINE_MUTEX(block_subsys_lock);
/*
* Can be deleted altogether. Later.
@@ -46,7 +47,7 @@ struct blkdev_info {
/*
* iterate over a list of blkdev_info structures. allows
* the major_names array to be iterated over from outside this file
- * must be called with the block_subsys_sem held
+ * must be called with the block_subsys_lock held
*/
void *get_next_blkdev(void *dev)
{
@@ -85,20 +86,20 @@ out:
void *acquire_blkdev_list(void)
{
- down(&block_subsys_sem);
+ mutex_lock(&block_subsys_lock);
return get_next_blkdev(NULL);
}
void release_blkdev_list(void *dev)
{
- up(&block_subsys_sem);
+ mutex_unlock(&block_subsys_lock);
kfree(dev);
}
/*
* Count the number of records in the blkdev_list.
- * must be called with the block_subsys_sem held
+ * must be called with the block_subsys_lock held
*/
int count_blkdev_list(void)
{
@@ -118,7 +119,7 @@ int count_blkdev_list(void)
/*
* extract the major and name values from a blkdev_info struct
* passed in as a void to *dev. Must be called with
- * block_subsys_sem held
+ * block_subsys_lock held
*/
int get_blkdev_info(void *dev, int *major, char **name)
{
@@ -138,7 +139,7 @@ int register_blkdev(unsigned int major, const char *name)
struct blk_major_name **n, *p;
int index, ret = 0;
- down(&block_subsys_sem);
+ mutex_lock(&block_subsys_lock);
/* temporary */
if (major == 0) {
@@ -183,7 +184,7 @@ int register_blkdev(unsigned int major, const char *name)
kfree(p);
}
out:
- up(&block_subsys_sem);
+ mutex_unlock(&block_subsys_lock);
return ret;
}
@@ -197,7 +198,7 @@ int unregister_blkdev(unsigned int major, const char *name)
int index = major_to_index(major);
int ret = 0;
- down(&block_subsys_sem);
+ mutex_lock(&block_subsys_lock);
for (n = &major_names[index]; *n; n = &(*n)->next)
if ((*n)->major == major)
break;
@@ -207,7 +208,7 @@ int unregister_blkdev(unsigned int major, const char *name)
p = *n;
*n = p->next;
}
- up(&block_subsys_sem);
+ mutex_unlock(&block_subsys_lock);
kfree(p);
return ret;
@@ -301,7 +302,7 @@ static void *part_start(struct seq_file *part, loff_t *pos)
struct list_head *p;
loff_t l = *pos;
- down(&block_subsys_sem);
+ mutex_lock(&block_subsys_lock);
list_for_each(p, &block_subsys.kset.list)
if (!l--)
return list_entry(p, struct gendisk, kobj.entry);
@@ -318,7 +319,7 @@ static void *part_next(struct seq_file *part, void *v, loff_t *pos)
static void part_stop(struct seq_file *part, void *v)
{
- up(&block_subsys_sem);
+ mutex_unlock(&block_subsys_lock);
}
static int show_partition(struct seq_file *part, void *v)
@@ -377,7 +378,7 @@ static struct kobject *base_probe(dev_t dev, int *part, void *data)
static int __init genhd_device_init(void)
{
- bdev_map = kobj_map_init(base_probe, &block_subsys_sem);
+ bdev_map = kobj_map_init(base_probe, &block_subsys_lock);
blk_dev_init();
subsystem_register(&block_subsys);
return 0;
@@ -611,7 +612,7 @@ static void *diskstats_start(struct seq_file *part, loff_t *pos)
loff_t k = *pos;
struct list_head *p;
- down(&block_subsys_sem);
+ mutex_lock(&block_subsys_lock);
list_for_each(p, &block_subsys.kset.list)
if (!k--)
return list_entry(p, struct gendisk, kobj.entry);
@@ -628,7 +629,7 @@ static void *diskstats_next(struct seq_file *part, void *v, loff_t *pos)
static void diskstats_stop(struct seq_file *part, void *v)
{
- up(&block_subsys_sem);
+ mutex_unlock(&block_subsys_lock);
}
static int diskstats_show(struct seq_file *s, void *v)
diff --git a/crypto/aes.c b/crypto/aes.c
index 0a6a5c143686..a5017292e066 100644
--- a/crypto/aes.c
+++ b/crypto/aes.c
@@ -75,12 +75,11 @@ byte(const u32 x, const unsigned n)
struct aes_ctx {
int key_length;
- u32 E[60];
- u32 D[60];
+ u32 buf[120];
};
-#define E_KEY ctx->E
-#define D_KEY ctx->D
+#define E_KEY (&ctx->buf[0])
+#define D_KEY (&ctx->buf[60])
static u8 pow_tab[256] __initdata;
static u8 log_tab[256] __initdata;
diff --git a/crypto/api.c b/crypto/api.c
index e26156f71839..80bba637fba7 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -165,7 +165,7 @@ static unsigned int crypto_ctxsize(struct crypto_alg *alg, int flags)
break;
}
- return len + alg->cra_alignmask;
+ return len + (alg->cra_alignmask & ~(crypto_tfm_ctx_alignment() - 1));
}
struct crypto_tfm *crypto_alloc_tfm(const char *name, u32 flags)
@@ -179,12 +179,10 @@ struct crypto_tfm *crypto_alloc_tfm(const char *name, u32 flags)
goto out;
tfm_size = sizeof(*tfm) + crypto_ctxsize(alg, flags);
- tfm = kmalloc(tfm_size, GFP_KERNEL);
+ tfm = kzalloc(tfm_size, GFP_KERNEL);
if (tfm == NULL)
goto out_put;
- memset(tfm, 0, tfm_size);
-
tfm->__crt_alg = alg;
if (crypto_init_flags(tfm, flags))
diff --git a/crypto/deflate.c b/crypto/deflate.c
index bc73342cd1ec..f209368d62ae 100644
--- a/crypto/deflate.c
+++ b/crypto/deflate.c
@@ -73,12 +73,11 @@ static int deflate_decomp_init(struct deflate_ctx *ctx)
int ret = 0;
struct z_stream_s *stream = &ctx->decomp_stream;
- stream->workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
+ stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
if (!stream->workspace ) {
ret = -ENOMEM;
goto out;
}
- memset(stream->workspace, 0, zlib_inflate_workspacesize());
ret = zlib_inflateInit2(stream, -DEFLATE_DEF_WINBITS);
if (ret != Z_OK) {
ret = -EINVAL;
diff --git a/crypto/des.c b/crypto/des.c
index 7bb548653dc6..2d74cab40c3e 100644
--- a/crypto/des.c
+++ b/crypto/des.c
@@ -965,6 +965,7 @@ static struct crypto_alg des3_ede_alg = {
.cra_blocksize = DES3_EDE_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct des3_ede_ctx),
.cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
.cra_list = LIST_HEAD_INIT(des3_ede_alg.cra_list),
.cra_u = { .cipher = {
.cia_min_keysize = DES3_EDE_KEY_SIZE,
diff --git a/crypto/serpent.c b/crypto/serpent.c
index 52ad1a492620..e366406ab49d 100644
--- a/crypto/serpent.c
+++ b/crypto/serpent.c
@@ -481,6 +481,7 @@ static struct crypto_alg serpent_alg = {
.cra_flags = CRYPTO_ALG_TYPE_CIPHER,
.cra_blocksize = SERPENT_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct serpent_ctx),
+ .cra_alignmask = 3,
.cra_module = THIS_MODULE,
.cra_list = LIST_HEAD_INIT(serpent_alg.cra_list),
.cra_u = { .cipher = {
diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h
index 733d07ed75e9..1f683ba794ee 100644
--- a/crypto/tcrypt.h
+++ b/crypto/tcrypt.h
@@ -26,37 +26,38 @@
#define MAX_IVLEN 32
struct hash_testvec {
+ /* only used with keyed hash algorithms */
+ char key[128] __attribute__ ((__aligned__(4)));
char plaintext[128];
- unsigned char psize;
char digest[MAX_DIGEST_SIZE];
- unsigned char np;
unsigned char tap[MAX_TAP];
- char key[128]; /* only used with keyed hash algorithms */
+ unsigned char psize;
+ unsigned char np;
unsigned char ksize;
};
struct hmac_testvec {
char key[128];
- unsigned char ksize;
char plaintext[128];
- unsigned char psize;
char digest[MAX_DIGEST_SIZE];
- unsigned char np;
unsigned char tap[MAX_TAP];
+ unsigned char ksize;
+ unsigned char psize;
+ unsigned char np;
};
struct cipher_testvec {
- unsigned char fail;
- unsigned char wk; /* weak key flag */
- char key[MAX_KEYLEN];
- unsigned char klen;
+ char key[MAX_KEYLEN] __attribute__ ((__aligned__(4)));
char iv[MAX_IVLEN];
char input[48];
- unsigned char ilen;
char result[48];
- unsigned char rlen;
- int np;
unsigned char tap[MAX_TAP];
+ int np;
+ unsigned char fail;
+ unsigned char wk; /* weak key flag */
+ unsigned char klen;
+ unsigned char ilen;
+ unsigned char rlen;
};
struct cipher_speed {
diff --git a/crypto/twofish.c b/crypto/twofish.c
index a26d885486fb..ddfd5a3fcc5f 100644
--- a/crypto/twofish.c
+++ b/crypto/twofish.c
@@ -44,6 +44,7 @@
#include
#include
#include
+#include
/* The large precomputed tables for the Twofish cipher (twofish.c)
@@ -542,9 +543,9 @@ static const u8 calc_sb_tbl[512] = {
#define CALC_K(a, j, k, l, m, n) \
x = CALC_K_2 (k, l, k, l, 0); \
y = CALC_K_2 (m, n, m, n, 4); \
- y = (y << 8) + (y >> 24); \
+ y = rol32(y, 8); \
x += y; y += x; ctx->a[j] = x; \
- ctx->a[(j) + 1] = (y << 9) + (y >> 23)
+ ctx->a[(j) + 1] = rol32(y, 9)
#define CALC_K192_2(a, b, c, d, j) \
CALC_K_2 (q0[a ^ key[(j) + 16]], \
@@ -555,9 +556,9 @@ static const u8 calc_sb_tbl[512] = {
#define CALC_K192(a, j, k, l, m, n) \
x = CALC_K192_2 (l, l, k, k, 0); \
y = CALC_K192_2 (n, n, m, m, 4); \
- y = (y << 8) + (y >> 24); \
+ y = rol32(y, 8); \
x += y; y += x; ctx->a[j] = x; \
- ctx->a[(j) + 1] = (y << 9) + (y >> 23)
+ ctx->a[(j) + 1] = rol32(y, 9)
#define CALC_K256_2(a, b, j) \
CALC_K192_2 (q1[b ^ key[(j) + 24]], \
@@ -568,9 +569,9 @@ static const u8 calc_sb_tbl[512] = {
#define CALC_K256(a, j, k, l, m, n) \
x = CALC_K256_2 (k, l, 0); \
y = CALC_K256_2 (m, n, 4); \
- y = (y << 8) + (y >> 24); \
+ y = rol32(y, 8); \
x += y; y += x; ctx->a[j] = x; \
- ctx->a[(j) + 1] = (y << 9) + (y >> 23)
+ ctx->a[(j) + 1] = rol32(y, 9)
/* Macros to compute the g() function in the encryption and decryption
@@ -594,15 +595,15 @@ static const u8 calc_sb_tbl[512] = {
x = G1 (a); y = G2 (b); \
x += y; y += x + ctx->k[2 * (n) + 1]; \
(c) ^= x + ctx->k[2 * (n)]; \
- (c) = ((c) >> 1) + ((c) << 31); \
- (d) = (((d) << 1)+((d) >> 31)) ^ y
+ (c) = ror32((c), 1); \
+ (d) = rol32((d), 1) ^ y
#define DECROUND(n, a, b, c, d) \
x = G1 (a); y = G2 (b); \
x += y; y += x; \
(d) ^= y + ctx->k[2 * (n) + 1]; \
- (d) = ((d) >> 1) + ((d) << 31); \
- (c) = (((c) << 1)+((c) >> 31)); \
+ (d) = ror32((d), 1); \
+ (c) = rol32((c), 1); \
(c) ^= (x + ctx->k[2 * (n)])
/* Encryption and decryption cycles; each one is simply two Feistel rounds
diff --git a/drivers/atm/suni.c b/drivers/atm/suni.c
index 06817dec0c25..b1d063cc4fbe 100644
--- a/drivers/atm/suni.c
+++ b/drivers/atm/suni.c
@@ -188,7 +188,7 @@ static int suni_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
case SONET_GETDIAG:
return get_diag(dev,arg);
case SONET_SETFRAMING:
- if (arg != SONET_FRAME_SONET) return -EINVAL;
+ if ((int)(unsigned long)arg != SONET_FRAME_SONET) return -EINVAL;
return 0;
case SONET_GETFRAMING:
return put_user(SONET_FRAME_SONET,(int __user *)arg) ?
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 07a7f97e1de9..29f3d7504da1 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -141,7 +141,7 @@ int __devinit register_cpu(struct cpu *cpu, int num, struct node *root)
return error;
}
-struct sys_device *get_cpu_sysdev(int cpu)
+struct sys_device *get_cpu_sysdev(unsigned cpu)
{
if (cpu < NR_CPUS)
return cpu_sys_devices[cpu];
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index e97e911ebf7a..472318205236 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -211,18 +211,20 @@ static int
fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
{
u8 *new_data;
+ int new_size = fw_priv->alloc_size;
if (min_size <= fw_priv->alloc_size)
return 0;
- new_data = vmalloc(fw_priv->alloc_size + PAGE_SIZE);
+ new_size = ALIGN(min_size, PAGE_SIZE);
+ new_data = vmalloc(new_size);
if (!new_data) {
printk(KERN_ERR "%s: unable to alloc buffer\n", __FUNCTION__);
/* Make sure that we don't keep incomplete data */
fw_load_abort(fw_priv);
return -ENOMEM;
}
- fw_priv->alloc_size += PAGE_SIZE;
+ fw_priv->alloc_size = new_size;
if (fw_priv->fw->data) {
memcpy(new_data, fw_priv->fw->data, fw_priv->fw->size);
vfree(fw_priv->fw->data);
diff --git a/drivers/base/map.c b/drivers/base/map.c
index b449dae6f0d3..e87017f36853 100644
--- a/drivers/base/map.c
+++ b/drivers/base/map.c
@@ -11,6 +11,7 @@
#include
#include
+#include
#include
#include
#include
@@ -25,7 +26,7 @@ struct kobj_map {
int (*lock)(dev_t, void *);
void *data;
} *probes[255];
- struct semaphore *sem;
+ struct mutex *lock;
};
int kobj_map(struct kobj_map *domain, dev_t dev, unsigned long range,
@@ -53,7 +54,7 @@ int kobj_map(struct kobj_map *domain, dev_t dev, unsigned long range,
p->range = range;
p->data = data;
}
- down(domain->sem);
+ mutex_lock(domain->lock);
for (i = 0, p -= n; i < n; i++, p++, index++) {
struct probe **s = &domain->probes[index % 255];
while (*s && (*s)->range < range)
@@ -61,7 +62,7 @@ int kobj_map(struct kobj_map *domain, dev_t dev, unsigned long range,
p->next = *s;
*s = p;
}
- up(domain->sem);
+ mutex_unlock(domain->lock);
return 0;
}
@@ -75,7 +76,7 @@ void kobj_unmap(struct kobj_map *domain, dev_t dev, unsigned long range)
if (n > 255)
n = 255;
- down(domain->sem);
+ mutex_lock(domain->lock);
for (i = 0; i < n; i++, index++) {
struct probe **s;
for (s = &domain->probes[index % 255]; *s; s = &(*s)->next) {
@@ -88,7 +89,7 @@ void kobj_unmap(struct kobj_map *domain, dev_t dev, unsigned long range)
}
}
}
- up(domain->sem);
+ mutex_unlock(domain->lock);
kfree(found);
}
@@ -99,7 +100,7 @@ struct kobject *kobj_lookup(struct kobj_map *domain, dev_t dev, int *index)
unsigned long best = ~0UL;
retry:
- down(domain->sem);
+ mutex_lock(domain->lock);
for (p = domain->probes[MAJOR(dev) % 255]; p; p = p->next) {
struct kobject *(*probe)(dev_t, int *, void *);
struct module *owner;
@@ -120,7 +121,7 @@ retry:
module_put(owner);
continue;
}
- up(domain->sem);
+ mutex_unlock(domain->lock);
kobj = probe(dev, index, data);
/* Currently ->owner protects _only_ ->probe() itself. */
module_put(owner);
@@ -128,11 +129,11 @@ retry:
return kobj;
goto retry;
}
- up(domain->sem);
+ mutex_unlock(domain->lock);
return NULL;
}
-struct kobj_map *kobj_map_init(kobj_probe_t *base_probe, struct semaphore *sem)
+struct kobj_map *kobj_map_init(kobj_probe_t *base_probe, struct mutex *lock)
{
struct kobj_map *p = kmalloc(sizeof(struct kobj_map), GFP_KERNEL);
struct probe *base = kzalloc(sizeof(*base), GFP_KERNEL);
@@ -149,6 +150,6 @@ struct kobj_map *kobj_map_init(kobj_probe_t *base_probe, struct semaphore *sem)
base->get = base_probe;
for (i = 0; i < 255; i++)
p->probes[i] = base;
- p->sem = sem;
+ p->lock = lock;
return p;
}
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 461554a02517..89b268321321 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -61,7 +61,7 @@ int platform_get_irq(struct platform_device *dev, unsigned int num)
{
struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);
- return r ? r->start : 0;
+ return r ? r->start : -ENXIO;
}
EXPORT_SYMBOL_GPL(platform_get_irq);
@@ -98,7 +98,7 @@ int platform_get_irq_byname(struct platform_device *dev, char *name)
{
struct resource *r = platform_get_resource_byname(dev, IORESOURCE_IRQ, name);
- return r ? r->start : 0;
+ return r ? r->start : -ENXIO;
}
EXPORT_SYMBOL_GPL(platform_get_irq_byname);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index f04d864770ad..f73446f580df 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,7 +8,6 @@
* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
- * -- Kill first_open (Al Viro fixed the block layer now)
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
* -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
@@ -181,6 +180,7 @@ struct ub_dev;
#define UB_DIR_ILLEGAL2 2
#define UB_DIR_WRITE 3
+/* P3 */
#define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \
(((c)==UB_DIR_READ)? 'r': 'n'))
@@ -196,24 +196,11 @@ enum ub_scsi_cmd_state {
UB_CMDST_DONE /* Final state */
};
-static char *ub_scsi_cmd_stname[] = {
- ". ",
- "Cmd",
- "dat",
- "c2s",
- "sts",
- "clr",
- "crs",
- "Sen",
- "fin"
-};
-
struct ub_scsi_cmd {
unsigned char cdb[UB_MAX_CDB_SIZE];
unsigned char cdb_len;
unsigned char dir; /* 0 - none, 1 - read, 3 - write. */
- unsigned char trace_index;
enum ub_scsi_cmd_state state;
unsigned int tag;
struct ub_scsi_cmd *next;
@@ -249,28 +236,6 @@ struct ub_capacity {
unsigned int bshift; /* Shift between 512 and hard sects */
};
-/*
- * The SCSI command tracing structure.
- */
-
-#define SCMD_ST_HIST_SZ 8
-#define SCMD_TRACE_SZ 63 /* Less than 4KB of 61-byte lines */
-
-struct ub_scsi_cmd_trace {
- int hcur;
- unsigned int tag;
- unsigned int req_size, act_size;
- unsigned char op;
- unsigned char dir;
- unsigned char key, asc, ascq;
- char st_hst[SCMD_ST_HIST_SZ];
-};
-
-struct ub_scsi_trace {
- int cur;
- struct ub_scsi_cmd_trace vec[SCMD_TRACE_SZ];
-};
-
/*
* This is a direct take-off from linux/include/completion.h
* The difference is that I do not wait on this thing, just poll.
@@ -334,7 +299,6 @@ struct ub_lun {
int changed; /* Media was changed */
int removable;
int readonly;
- int first_open; /* Kludge. See ub_bd_open. */
struct ub_request urq;
@@ -390,7 +354,6 @@ struct ub_dev {
wait_queue_head_t reset_wait;
int sg_stat[6];
- struct ub_scsi_trace tr;
};
/*
@@ -459,137 +422,6 @@ static int ub_qlock_next = 0;
static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
-/*
- * The SCSI command tracing procedures.
- */
-
-static void ub_cmdtr_new(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- int n;
- struct ub_scsi_cmd_trace *t;
-
- if ((n = sc->tr.cur + 1) == SCMD_TRACE_SZ) n = 0;
- t = &sc->tr.vec[n];
-
- memset(t, 0, sizeof(struct ub_scsi_cmd_trace));
- t->tag = cmd->tag;
- t->op = cmd->cdb[0];
- t->dir = cmd->dir;
- t->req_size = cmd->len;
- t->st_hst[0] = cmd->state;
-
- sc->tr.cur = n;
- cmd->trace_index = n;
-}
-
-static void ub_cmdtr_state(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- int n;
- struct ub_scsi_cmd_trace *t;
-
- t = &sc->tr.vec[cmd->trace_index];
- if (t->tag == cmd->tag) {
- if ((n = t->hcur + 1) == SCMD_ST_HIST_SZ) n = 0;
- t->st_hst[n] = cmd->state;
- t->hcur = n;
- }
-}
-
-static void ub_cmdtr_act_len(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
-{
- struct ub_scsi_cmd_trace *t;
-
- t = &sc->tr.vec[cmd->trace_index];
- if (t->tag == cmd->tag)
- t->act_size = cmd->act_len;
-}
-
-static void ub_cmdtr_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- unsigned char *sense)
-{
- struct ub_scsi_cmd_trace *t;
-
- t = &sc->tr.vec[cmd->trace_index];
- if (t->tag == cmd->tag) {
- t->key = sense[2] & 0x0F;
- t->asc = sense[12];
- t->ascq = sense[13];
- }
-}
-
-static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
- char *page)
-{
- struct usb_interface *intf;
- struct ub_dev *sc;
- struct list_head *p;
- struct ub_lun *lun;
- int cnt;
- unsigned long flags;
- int nc, nh;
- int i, j;
- struct ub_scsi_cmd_trace *t;
-
- intf = to_usb_interface(dev);
- sc = usb_get_intfdata(intf);
- if (sc == NULL)
- return 0;
-
- cnt = 0;
- spin_lock_irqsave(sc->lock, flags);
-
- cnt += sprintf(page + cnt,
- "poison %d reset %d\n",
- atomic_read(&sc->poison), sc->reset);
- cnt += sprintf(page + cnt,
- "qlen %d qmax %d\n",
- sc->cmd_queue.qlen, sc->cmd_queue.qmax);
- cnt += sprintf(page + cnt,
- "sg %d %d %d %d %d .. %d\n",
- sc->sg_stat[0],
- sc->sg_stat[1],
- sc->sg_stat[2],
- sc->sg_stat[3],
- sc->sg_stat[4],
- sc->sg_stat[5]);
-
- list_for_each (p, &sc->luns) {
- lun = list_entry(p, struct ub_lun, link);
- cnt += sprintf(page + cnt,
- "lun %u changed %d removable %d readonly %d\n",
- lun->num, lun->changed, lun->removable, lun->readonly);
- }
-
- if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
- for (j = 0; j < SCMD_TRACE_SZ; j++) {
- t = &sc->tr.vec[nc];
-
- cnt += sprintf(page + cnt, "%08x %02x", t->tag, t->op);
- if (t->op == REQUEST_SENSE) {
- cnt += sprintf(page + cnt, " [sense %x %02x %02x]",
- t->key, t->asc, t->ascq);
- } else {
- cnt += sprintf(page + cnt, " %c", UB_DIR_CHAR(t->dir));
- cnt += sprintf(page + cnt, " [%5d %5d]",
- t->req_size, t->act_size);
- }
- if ((nh = t->hcur + 1) == SCMD_ST_HIST_SZ) nh = 0;
- for (i = 0; i < SCMD_ST_HIST_SZ; i++) {
- cnt += sprintf(page + cnt, " %s",
- ub_scsi_cmd_stname[(int)t->st_hst[nh]]);
- if (++nh == SCMD_ST_HIST_SZ) nh = 0;
- }
- cnt += sprintf(page + cnt, "\n");
-
- if (++nc == SCMD_TRACE_SZ) nc = 0;
- }
-
- spin_unlock_irqrestore(sc->lock, flags);
- return cnt;
-}
-
-static DEVICE_ATTR(diag, S_IRUGO, ub_diag_show, NULL); /* N.B. World readable */
-
/*
* The id allocator.
*
@@ -1092,7 +924,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
add_timer(&sc->work_timer);
cmd->state = UB_CMDST_CMD;
- ub_cmdtr_state(sc, cmd);
return 0;
}
@@ -1145,12 +976,10 @@ static void ub_scsi_dispatch(struct ub_dev *sc)
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
} else if (cmd->state == UB_CMDST_INIT) {
- ub_cmdtr_new(sc, cmd);
if ((rc = ub_scsi_cmd_start(sc, cmd)) == 0)
break;
cmd->error = rc;
cmd->state = UB_CMDST_DONE;
- ub_cmdtr_state(sc, cmd);
} else {
if (!ub_is_completed(&sc->work_done))
break;
@@ -1247,7 +1076,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
cmd->state = UB_CMDST_CLEAR;
- ub_cmdtr_state(sc, cmd);
return;
case -ESHUTDOWN: /* unplug */
case -EILSEQ: /* unplug timeout on uhci */
@@ -1279,7 +1107,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
cmd->state = UB_CMDST_CLR2STS;
- ub_cmdtr_state(sc, cmd);
return;
}
if (urb->status == -EOVERFLOW) {
@@ -1304,7 +1131,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if (urb->status != 0 ||
len != cmd->sgv[cmd->current_sg].length) {
cmd->act_len += len;
- ub_cmdtr_act_len(sc, cmd);
cmd->error = -EIO;
ub_state_stat(sc, cmd);
@@ -1331,7 +1157,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
}
cmd->act_len += urb->actual_length;
- ub_cmdtr_act_len(sc, cmd);
if (++cmd->current_sg < cmd->nsg) {
ub_data_start(sc, cmd);
@@ -1357,7 +1182,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
cmd->error = -EIO; /* A cheap trick... */
cmd->state = UB_CMDST_CLRRS;
- ub_cmdtr_state(sc, cmd);
return;
}
@@ -1441,7 +1265,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
cmd->state = UB_CMDST_DONE;
- ub_cmdtr_state(sc, cmd);
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
@@ -1496,7 +1319,6 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
add_timer(&sc->work_timer);
cmd->state = UB_CMDST_DATA;
- ub_cmdtr_state(sc, cmd);
}
/*
@@ -1508,7 +1330,6 @@ static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc)
cmd->error = rc;
cmd->state = UB_CMDST_DONE;
- ub_cmdtr_state(sc, cmd);
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
}
@@ -1554,7 +1375,6 @@ static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
cmd->stat_count = 0;
cmd->state = UB_CMDST_STAT;
- ub_cmdtr_state(sc, cmd);
}
/*
@@ -1573,7 +1393,6 @@ static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
cmd->state = UB_CMDST_STAT;
- ub_cmdtr_state(sc, cmd);
}
/*
@@ -1611,7 +1430,6 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
scmd->tag = sc->tagcnt++;
cmd->state = UB_CMDST_SENSE;
- ub_cmdtr_state(sc, cmd);
ub_cmdq_insert(sc, scmd);
return;
@@ -1667,11 +1485,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
unsigned char *sense = sc->top_sense;
struct ub_scsi_cmd *cmd;
- /*
- * Ignoring scmd->act_len, because the buffer was pre-zeroed.
- */
- ub_cmdtr_sense(sc, scmd, sense);
-
/*
* Find the command which triggered the unit attention or a check,
* save the sense into it, and advance its state machine.
@@ -1693,6 +1506,9 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
return;
}
+ /*
+ * Ignoring scmd->act_len, because the buffer was pre-zeroed.
+ */
cmd->key = sense[2] & 0x0F;
cmd->asc = sense[12];
cmd->ascq = sense[13];
@@ -1849,26 +1665,6 @@ static int ub_bd_open(struct inode *inode, struct file *filp)
sc->openc++;
spin_unlock_irqrestore(&ub_lock, flags);
- /*
- * This is a workaround for a specific problem in our block layer.
- * In 2.6.9, register_disk duplicates the code from rescan_partitions.
- * However, if we do add_disk with a device which persistently reports
- * a changed media, add_disk calls register_disk, which does do_open,
- * which will call rescan_paritions for changed media. After that,
- * register_disk attempts to do it all again and causes double kobject
- * registration and a eventually an oops on module removal.
- *
- * The bottom line is, Al Viro says that we should not allow
- * bdev->bd_invalidated to be set when doing add_disk no matter what.
- */
- if (lun->first_open) {
- lun->first_open = 0;
- if (lun->changed) {
- rc = -ENOMEDIUM;
- goto err_open;
- }
- }
-
if (lun->removable || lun->readonly)
check_disk_change(inode->i_bdev);
@@ -2007,9 +1803,8 @@ static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
init_completion(&compl);
rc = -ENOMEM;
- if ((cmd = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
+ if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
goto err_alloc;
- memset(cmd, 0, ALLOC_SIZE);
cmd->cdb[0] = TEST_UNIT_READY;
cmd->cdb_len = 6;
@@ -2062,9 +1857,8 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
init_completion(&compl);
rc = -ENOMEM;
- if ((cmd = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
+ if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
goto err_alloc;
- memset(cmd, 0, ALLOC_SIZE);
p = (char *)cmd + sizeof(struct ub_scsi_cmd);
cmd->cdb[0] = 0x25;
@@ -2405,9 +2199,8 @@ static int ub_probe(struct usb_interface *intf,
return -ENXIO;
rc = -ENOMEM;
- if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
+ if ((sc = kzalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
goto err_core;
- memset(sc, 0, sizeof(struct ub_dev));
sc->lock = ub_next_lock();
INIT_LIST_HEAD(&sc->luns);
usb_init_urb(&sc->work_urb);
@@ -2438,9 +2231,6 @@ static int ub_probe(struct usb_interface *intf,
if (ub_get_pipes(sc, sc->dev, intf) != 0)
goto err_dev_desc;
- if (device_create_file(&sc->intf->dev, &dev_attr_diag) != 0)
- goto err_diag;
-
/*
* At this point, all USB initialization is done, do upper layer.
* We really hate halfway initialized structures, so from the
@@ -2480,19 +2270,8 @@ static int ub_probe(struct usb_interface *intf,
nluns = 1;
for (i = 0; i < 3; i++) {
- if ((rc = ub_sync_getmaxlun(sc)) < 0) {
- /*
- * This segment is taken from usb-storage. They say
- * that ZIP-100 needs this, but my own ZIP-100 works
- * fine without this.
- * Still, it does not seem to hurt anything.
- */
- if (rc == -EPIPE) {
- ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
- ub_probe_clear_stall(sc, sc->send_bulk_pipe);
- }
+ if ((rc = ub_sync_getmaxlun(sc)) < 0)
break;
- }
if (rc != 0) {
nluns = rc;
break;
@@ -2505,8 +2284,6 @@ static int ub_probe(struct usb_interface *intf,
}
return 0;
- /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
-err_diag:
err_dev_desc:
usb_set_intfdata(intf, NULL);
// usb_put_intf(sc->intf);
@@ -2524,9 +2301,8 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
int rc;
rc = -ENOMEM;
- if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
+ if ((lun = kzalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
goto err_alloc;
- memset(lun, 0, sizeof(struct ub_lun));
lun->num = lnum;
rc = -ENOSR;
@@ -2541,7 +2317,6 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
lun->removable = 1; /* XXX Query this from the device */
lun->changed = 1; /* ub_revalidate clears only */
- lun->first_open = 1;
ub_revalidate(sc, lun);
rc = -ENOMEM;
@@ -2636,7 +2411,6 @@ static void ub_disconnect(struct usb_interface *intf)
while ((cmd = ub_cmdq_peek(sc)) != NULL) {
cmd->error = -ENOTCONN;
cmd->state = UB_CMDST_DONE;
- ub_cmdtr_state(sc, cmd);
ub_cmdq_pop(sc);
(*cmd->done)(sc, cmd);
cnt++;
@@ -2687,7 +2461,6 @@ static void ub_disconnect(struct usb_interface *intf)
* and no URBs left in transit.
*/
- device_remove_file(&sc->intf->dev, &dev_attr_diag);
usb_set_intfdata(intf, NULL);
// usb_put_intf(sc->intf);
sc->intf = NULL;
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 503dd901d406..090d154098bb 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
-obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
+obj-$(CONFIG_COMPUTONE) += ip2/
obj-$(CONFIG_RISCOM8) += riscom8.o
obj-$(CONFIG_ISI) += isicom.o
obj-$(CONFIG_SYNCLINK) += synclink.o
diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig
index 56ace9d5e2ae..5278c388d3e7 100644
--- a/drivers/char/drm/Kconfig
+++ b/drivers/char/drm/Kconfig
@@ -37,8 +37,8 @@ config DRM_RADEON
help
Choose this option if you have an ATI Radeon graphics card. There
are both PCI and AGP versions. You don't need to choose this to
- run the Radeon in plain VGA mode. There is a product page at
- .
+ run the Radeon in plain VGA mode.
+
If M is selected, the module will be called radeon.
config DRM_I810
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
new file mode 100644
index 000000000000..6bfe2543ddc2
--- /dev/null
+++ b/drivers/char/ip2/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Computone IntelliPort Plus Driver
+#
+
+obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
+
+ip2-objs := ip2base.o
+
diff --git a/drivers/char/ip2.c b/drivers/char/ip2/ip2base.c
similarity index 95%
rename from drivers/char/ip2.c
rename to drivers/char/ip2/ip2base.c
index 7cadfc6ef352..435ccfc74958 100644
--- a/drivers/char/ip2.c
+++ b/drivers/char/ip2/ip2base.c
@@ -20,14 +20,14 @@
#define __initdata
#endif
-#include "./ip2/ip2types.h"
-#include "./ip2/fip_firm.h" // the meat
+#include "ip2types.h"
+#include "fip_firm.h" // the meat
int
ip2_loadmain(int *, int *, unsigned char *, int ); // ref into ip2main.c
/* Note: Add compiled in defaults to these arrays, not to the structure
- in ip2/ip2.h any longer. That structure WILL get overridden
+ in ip2.h any longer. That structure WILL get overridden
by these values, or command line values, or insmod values!!! =mhw=
*/
static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 };
diff --git a/drivers/char/ip2main.c b/drivers/char/ip2/ip2main.c
similarity index 99%
rename from drivers/char/ip2main.c
rename to drivers/char/ip2/ip2main.c
index 48fcfba37bfa..03db1cb3fa95 100644
--- a/drivers/char/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -35,7 +35,7 @@
// Clean up potential NULL pointer dereferences
// Clean up devfs registration
// Add kernel command line parsing for io and irq
-// Compile defaults for io and irq are now set in ip2.c not ip2/ip2.h!
+// Compile defaults for io and irq are now set in ip2.c not ip2.h!
// Reworked poll_only hack for explicit parameter setting
// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0
// Merged ip2_loadmain and old_ip2_init
@@ -123,12 +123,12 @@
#include
-#include "./ip2/ip2types.h"
-#include "./ip2/ip2trace.h"
-#include "./ip2/ip2ioctl.h"
-#include "./ip2/ip2.h"
-#include "./ip2/i2ellis.h"
-#include "./ip2/i2lib.h"
+#include "ip2types.h"
+#include "ip2trace.h"
+#include "ip2ioctl.h"
+#include "ip2.h"
+#include "i2ellis.h"
+#include "i2lib.h"
/*****************
* /proc/ip2mem *
@@ -282,9 +282,9 @@ static int tracewrap;
/* Code */
/********/
-#include "./ip2/i2ellis.c" /* Extremely low-level interface services */
-#include "./ip2/i2cmd.c" /* Standard loadware command definitions */
-#include "./ip2/i2lib.c" /* High level interface services */
+#include "i2ellis.c" /* Extremely low-level interface services */
+#include "i2cmd.c" /* Standard loadware command definitions */
+#include "i2lib.c" /* High level interface services */
/* Configuration area for modprobe */
diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c
index 2e308657f6f6..b0038b19b505 100644
--- a/drivers/char/s3c2410-rtc.c
+++ b/drivers/char/s3c2410-rtc.c
@@ -448,13 +448,13 @@ static int s3c2410_rtc_probe(struct platform_device *pdev)
/* find the IRQs */
s3c2410_rtc_tickno = platform_get_irq(pdev, 1);
- if (s3c2410_rtc_tickno <= 0) {
+ if (s3c2410_rtc_tickno < 0) {
dev_err(&pdev->dev, "no irq for rtc tick\n");
return -ENOENT;
}
s3c2410_rtc_alarmno = platform_get_irq(pdev, 0);
- if (s3c2410_rtc_alarmno <= 0) {
+ if (s3c2410_rtc_alarmno < 0) {
dev_err(&pdev->dev, "no irq for alarm\n");
return -ENOENT;
}
diff --git a/drivers/char/snsc.h b/drivers/char/snsc.h
index a9efc13cc858..8a98169b60c1 100644
--- a/drivers/char/snsc.h
+++ b/drivers/char/snsc.h
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2004-2006 Silicon Graphics, Inc. All rights reserved.
*/
/*
@@ -70,6 +70,9 @@ struct sysctl_data_s {
#define EV_CLASS_TEST_WARNING 0x6000ul
#define EV_CLASS_PWRD_NOTIFY 0x8000ul
+/* ENV class codes */
+#define ENV_PWRDN_PEND 0x4101ul
+
#define EV_SEVERITY_POWER_STABLE 0x0000ul
#define EV_SEVERITY_POWER_LOW_WARNING 0x0100ul
#define EV_SEVERITY_POWER_HIGH_WARNING 0x0200ul
diff --git a/drivers/char/snsc_event.c b/drivers/char/snsc_event.c
index baaa365285fa..a4fa507eed9e 100644
--- a/drivers/char/snsc_event.c
+++ b/drivers/char/snsc_event.c
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2004-2006 Silicon Graphics, Inc. All rights reserved.
*/
/*
@@ -187,7 +187,8 @@ scdrv_event_severity(int code)
static void
scdrv_dispatch_event(char *event, int len)
{
- int code, esp_code, src;
+ static int snsc_shutting_down = 0;
+ int code, esp_code, src, class;
char desc[CHUNKSIZE];
char *severity;
@@ -199,9 +200,25 @@ scdrv_dispatch_event(char *event, int len)
/* how urgent is the message? */
severity = scdrv_event_severity(code);
- if ((code & EV_CLASS_MASK) == EV_CLASS_PWRD_NOTIFY) {
+ class = (code & EV_CLASS_MASK);
+
+ if (class == EV_CLASS_PWRD_NOTIFY || code == ENV_PWRDN_PEND) {
struct task_struct *p;
+ if (snsc_shutting_down)
+ return;
+
+ snsc_shutting_down = 1;
+
+ /* give a message for each type of event */
+ if (class == EV_CLASS_PWRD_NOTIFY)
+ printk(KERN_NOTICE "Power off indication received."
+ " Sending SIGPWR to init...\n");
+ else if (code == ENV_PWRDN_PEND)
+ printk(KERN_CRIT "WARNING: Shutting down the system"
+ " due to a critical environmental condition."
+ " Sending SIGPWR to init...\n");
+
/* give a SIGPWR signal to init proc */
/* first find init's task */
@@ -210,12 +227,11 @@ scdrv_dispatch_event(char *event, int len)
if (p->pid == 1)
break;
}
- if (p) { /* we found init's task */
- printk(KERN_EMERG "Power off indication received. Initiating power fail sequence...\n");
+ if (p) {
force_sig(SIGPWR, p);
- } else { /* failed to find init's task - just give message(s) */
- printk(KERN_WARNING "Failed to find init proc to handle power off!\n");
- printk("%s|$(0x%x)%s\n", severity, esp_code, desc);
+ } else {
+ printk(KERN_ERR "Failed to signal init!\n");
+ snsc_shutting_down = 0; /* so can try again (?) */
}
read_unlock(&tasklist_lock);
} else {
diff --git a/drivers/char/watchdog/mpcore_wdt.c b/drivers/char/watchdog/mpcore_wdt.c
index b4d843489881..2c2c51773200 100644
--- a/drivers/char/watchdog/mpcore_wdt.c
+++ b/drivers/char/watchdog/mpcore_wdt.c
@@ -338,6 +338,10 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev)
wdt->dev = &dev->dev;
wdt->irq = platform_get_irq(dev, 0);
+ if (wdt->irq < 0) {
+ ret = -ENXIO;
+ goto err_free;
+ }
wdt->base = ioremap(res->start, res->end - res->start + 1);
if (!wdt->base) {
ret = -ENOMEM;
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 505677fb3157..d7125f4d9113 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -97,6 +97,9 @@ int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
group = __group;
}
+ if (!netlink_has_listeners(dev->nls, group))
+ return -ESRCH;
+
size = NLMSG_SPACE(sizeof(*msg) + msg->len);
skb = alloc_skb(size, gfp_mask);
@@ -111,9 +114,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
NETLINK_CB(skb).dst_group = group;
- netlink_broadcast(dev->nls, skb, 0, group, gfp_mask);
-
- return 0;
+ return netlink_broadcast(dev->nls, skb, 0, group, gfp_mask);
nlmsg_failure:
kfree_skb(skb);
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 0c08c58252be..5158a9db4bc5 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -284,7 +284,11 @@ aes_hw_extkey_available(uint8_t key_len)
static inline struct aes_ctx *aes_ctx(void *ctx)
{
- return (struct aes_ctx *)ALIGN((unsigned long)ctx, PADLOCK_ALIGNMENT);
+ unsigned long align = PADLOCK_ALIGNMENT;
+
+ if (align <= crypto_tfm_ctx_alignment())
+ align = 1;
+ return (struct aes_ctx *)ALIGN((unsigned long)ctx, align);
}
static int
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 1414851a17b8..d00a02fc23e4 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -434,7 +434,7 @@ static int
iop3xx_i2c_probe(struct platform_device *pdev)
{
struct resource *res;
- int ret;
+ int ret, irq;
struct i2c_adapter *new_adapter;
struct i2c_algo_iop3xx_data *adapter_data;
@@ -470,7 +470,12 @@ iop3xx_i2c_probe(struct platform_device *pdev)
goto release_region;
}
- ret = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0,
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = -ENXIO;
+ goto unmap;
+ }
+ ret = request_irq(irq, iop3xx_i2c_irq_handler, 0,
pdev->name, adapter_data);
if (ret) {
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 5ccd338a9dc9..2721e4c8184a 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -302,6 +302,10 @@ static int fsl_i2c_probe(struct platform_device *pdev)
}
i2c->irq = platform_get_irq(pdev, 0);
+ if (i2c->irq < 0) {
+ result = -ENXIO;
+ goto fail_get_irq;
+ }
i2c->flags = pdata->device_flags;
init_waitqueue_head(&i2c->queue);
@@ -340,6 +344,7 @@ static int fsl_i2c_probe(struct platform_device *pdev)
fail_irq:
iounmap(i2c->base);
fail_map:
+ fail_get_irq:
kfree(i2c);
return result;
};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 22781d84f79f..ac5cde1bbd2b 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -516,6 +516,10 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->freq_m = pdata->freq_m;
drv_data->freq_n = pdata->freq_n;
drv_data->irq = platform_get_irq(pd, 0);
+ if (drv_data->irq < 0) {
+ rc = -ENXIO;
+ goto exit_unmap_regs;
+ }
drv_data->adapter.id = I2C_HW_MV64XXX;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 32431dcf5d8e..71f27e955d87 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -674,6 +674,11 @@ static int au_ide_probe(struct device *dev)
ret = -ENODEV;
goto out;
}
+ if (ahwif->irq < 0) {
+ pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id);
+ ret = -ENODEV;
+ goto out;
+ }
if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
pr_debug("%s: request_mem_region failed\n", DRV_NAME);
diff --git a/drivers/infiniband/core/agent.c b/drivers/infiniband/core/agent.c
index 34b724afd28d..ecd1a3057c61 100644
--- a/drivers/infiniband/core/agent.c
+++ b/drivers/infiniband/core/agent.c
@@ -78,25 +78,6 @@ ib_get_agent_port(struct ib_device *device, int port_num)
return entry;
}
-int smi_check_local_dr_smp(struct ib_smp *smp,
- struct ib_device *device,
- int port_num)
-{
- struct ib_agent_port_private *port_priv;
-
- if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
- return 1;
-
- port_priv = ib_get_agent_port(device, port_num);
- if (!port_priv) {
- printk(KERN_DEBUG SPFX "smi_check_local_dr_smp %s port %d "
- "not open\n", device->name, port_num);
- return 1;
- }
-
- return smi_check_local_smp(port_priv->agent[0], smp);
-}
-
int agent_send_response(struct ib_mad *mad, struct ib_grh *grh,
struct ib_wc *wc, struct ib_device *device,
int port_num, int qpn)
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 2514de3480d8..7cfedb8d9bcd 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -121,7 +121,7 @@ struct cm_id_private {
struct rb_node service_node;
struct rb_node sidr_id_node;
- spinlock_t lock;
+ spinlock_t lock; /* Do not acquire inside cm.lock */
wait_queue_head_t wait;
atomic_t refcount;
@@ -1547,28 +1547,6 @@ static int cm_rep_handler(struct cm_work *work)
return -EINVAL;
}
- cm_id_priv->timewait_info->work.remote_id = rep_msg->local_comm_id;
- cm_id_priv->timewait_info->remote_ca_guid = rep_msg->local_ca_guid;
- cm_id_priv->timewait_info->remote_qpn = cm_rep_get_local_qpn(rep_msg);
-
- spin_lock_irqsave(&cm.lock, flags);
- /* Check for duplicate REP. */
- if (cm_insert_remote_id(cm_id_priv->timewait_info)) {
- spin_unlock_irqrestore(&cm.lock, flags);
- ret = -EINVAL;
- goto error;
- }
- /* Check for a stale connection. */
- if (cm_insert_remote_qpn(cm_id_priv->timewait_info)) {
- spin_unlock_irqrestore(&cm.lock, flags);
- cm_issue_rej(work->port, work->mad_recv_wc,
- IB_CM_REJ_STALE_CONN, CM_MSG_RESPONSE_REP,
- NULL, 0);
- ret = -EINVAL;
- goto error;
- }
- spin_unlock_irqrestore(&cm.lock, flags);
-
cm_format_rep_event(work);
spin_lock_irqsave(&cm_id_priv->lock, flags);
@@ -1581,6 +1559,34 @@ static int cm_rep_handler(struct cm_work *work)
ret = -EINVAL;
goto error;
}
+
+ cm_id_priv->timewait_info->work.remote_id = rep_msg->local_comm_id;
+ cm_id_priv->timewait_info->remote_ca_guid = rep_msg->local_ca_guid;
+ cm_id_priv->timewait_info->remote_qpn = cm_rep_get_local_qpn(rep_msg);
+
+ spin_lock(&cm.lock);
+ /* Check for duplicate REP. */
+ if (cm_insert_remote_id(cm_id_priv->timewait_info)) {
+ spin_unlock(&cm.lock);
+ spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+ ret = -EINVAL;
+ goto error;
+ }
+ /* Check for a stale connection. */
+ if (cm_insert_remote_qpn(cm_id_priv->timewait_info)) {
+ rb_erase(&cm_id_priv->timewait_info->remote_id_node,
+ &cm.remote_id_table);
+ cm_id_priv->timewait_info->inserted_remote_id = 0;
+ spin_unlock(&cm.lock);
+ spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+ cm_issue_rej(work->port, work->mad_recv_wc,
+ IB_CM_REJ_STALE_CONN, CM_MSG_RESPONSE_REP,
+ NULL, 0);
+ ret = -EINVAL;
+ goto error;
+ }
+ spin_unlock(&cm.lock);
+
cm_id_priv->id.state = IB_CM_REP_RCVD;
cm_id_priv->id.remote_id = rep_msg->local_comm_id;
cm_id_priv->remote_qpn = cm_rep_get_local_qpn(rep_msg);
@@ -1603,7 +1609,7 @@ static int cm_rep_handler(struct cm_work *work)
cm_deref_id(cm_id_priv);
return 0;
-error: cm_cleanup_timewait(cm_id_priv->timewait_info);
+error:
cm_deref_id(cm_id_priv);
return ret;
}
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index d34a6f1c4f4c..838bf54458d2 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -278,9 +278,9 @@ struct ib_fmr_pool *ib_create_fmr_pool(struct ib_pd *pd,
{
struct ib_pool_fmr *fmr;
struct ib_fmr_attr attr = {
- .max_pages = params->max_pages_per_fmr,
- .max_maps = IB_FMR_MAX_REMAPS,
- .page_size = PAGE_SHIFT
+ .max_pages = params->max_pages_per_fmr,
+ .max_maps = IB_FMR_MAX_REMAPS,
+ .page_shift = params->page_shift
};
for (i = 0; i < params->pool_size; ++i) {
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index c82f47a66e48..f7854b65fd55 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -31,7 +31,7 @@
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
- * $Id: mad.c 2817 2005-07-07 11:29:26Z halr $
+ * $Id: mad.c 5596 2006-03-03 01:00:07Z sean.hefty $
*/
#include
@@ -679,8 +679,8 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv,
goto out;
}
/* Check to post send on QP or process locally */
- ret = smi_check_local_dr_smp(smp, device, port_num);
- if (!ret || !device->process_mad)
+ ret = smi_check_local_smp(smp, device);
+ if (!ret)
goto out;
local = kmalloc(sizeof *local, GFP_ATOMIC);
@@ -765,18 +765,67 @@ out:
return ret;
}
-static int get_buf_length(int hdr_len, int data_len)
+static int get_pad_size(int hdr_len, int data_len)
{
int seg_size, pad;
seg_size = sizeof(struct ib_mad) - hdr_len;
if (data_len && seg_size) {
pad = seg_size - data_len % seg_size;
- if (pad == seg_size)
- pad = 0;
+ return pad == seg_size ? 0 : pad;
} else
- pad = seg_size;
- return hdr_len + data_len + pad;
+ return seg_size;
+}
+
+static void free_send_rmpp_list(struct ib_mad_send_wr_private *mad_send_wr)
+{
+ struct ib_rmpp_segment *s, *t;
+
+ list_for_each_entry_safe(s, t, &mad_send_wr->rmpp_list, list) {
+ list_del(&s->list);
+ kfree(s);
+ }
+}
+
+static int alloc_send_rmpp_list(struct ib_mad_send_wr_private *send_wr,
+ gfp_t gfp_mask)
+{
+ struct ib_mad_send_buf *send_buf = &send_wr->send_buf;
+ struct ib_rmpp_mad *rmpp_mad = send_buf->mad;
+ struct ib_rmpp_segment *seg = NULL;
+ int left, seg_size, pad;
+
+ send_buf->seg_size = sizeof (struct ib_mad) - send_buf->hdr_len;
+ seg_size = send_buf->seg_size;
+ pad = send_wr->pad;
+
+ /* Allocate data segments. */
+ for (left = send_buf->data_len + pad; left > 0; left -= seg_size) {
+ seg = kmalloc(sizeof (*seg) + seg_size, gfp_mask);
+ if (!seg) {
+ printk(KERN_ERR "alloc_send_rmpp_segs: RMPP mem "
+ "alloc failed for len %zd, gfp %#x\n",
+ sizeof (*seg) + seg_size, gfp_mask);
+ free_send_rmpp_list(send_wr);
+ return -ENOMEM;
+ }
+ seg->num = ++send_buf->seg_count;
+ list_add_tail(&seg->list, &send_wr->rmpp_list);
+ }
+
+ /* Zero any padding */
+ if (pad)
+ memset(seg->data + seg_size - pad, 0, pad);
+
+ rmpp_mad->rmpp_hdr.rmpp_version = send_wr->mad_agent_priv->
+ agent.rmpp_version;
+ rmpp_mad->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_DATA;
+ ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE);
+
+ send_wr->cur_seg = container_of(send_wr->rmpp_list.next,
+ struct ib_rmpp_segment, list);
+ send_wr->last_ack_seg = send_wr->cur_seg;
+ return 0;
}
struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
@@ -787,32 +836,40 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
{
struct ib_mad_agent_private *mad_agent_priv;
struct ib_mad_send_wr_private *mad_send_wr;
- int buf_size;
+ int pad, message_size, ret, size;
void *buf;
mad_agent_priv = container_of(mad_agent, struct ib_mad_agent_private,
agent);
- buf_size = get_buf_length(hdr_len, data_len);
+ pad = get_pad_size(hdr_len, data_len);
+ message_size = hdr_len + data_len + pad;
if ((!mad_agent->rmpp_version &&
- (rmpp_active || buf_size > sizeof(struct ib_mad))) ||
- (!rmpp_active && buf_size > sizeof(struct ib_mad)))
+ (rmpp_active || message_size > sizeof(struct ib_mad))) ||
+ (!rmpp_active && message_size > sizeof(struct ib_mad)))
return ERR_PTR(-EINVAL);
- buf = kzalloc(sizeof *mad_send_wr + buf_size, gfp_mask);
+ size = rmpp_active ? hdr_len : sizeof(struct ib_mad);
+ buf = kzalloc(sizeof *mad_send_wr + size, gfp_mask);
if (!buf)
return ERR_PTR(-ENOMEM);
- mad_send_wr = buf + buf_size;
+ mad_send_wr = buf + size;
+ INIT_LIST_HEAD(&mad_send_wr->rmpp_list);
mad_send_wr->send_buf.mad = buf;
+ mad_send_wr->send_buf.hdr_len = hdr_len;
+ mad_send_wr->send_buf.data_len = data_len;
+ mad_send_wr->pad = pad;
mad_send_wr->mad_agent_priv = mad_agent_priv;
- mad_send_wr->sg_list[0].length = buf_size;
+ mad_send_wr->sg_list[0].length = hdr_len;
mad_send_wr->sg_list[0].lkey = mad_agent->mr->lkey;
+ mad_send_wr->sg_list[1].length = sizeof(struct ib_mad) - hdr_len;
+ mad_send_wr->sg_list[1].lkey = mad_agent->mr->lkey;
mad_send_wr->send_wr.wr_id = (unsigned long) mad_send_wr;
mad_send_wr->send_wr.sg_list = mad_send_wr->sg_list;
- mad_send_wr->send_wr.num_sge = 1;
+ mad_send_wr->send_wr.num_sge = 2;
mad_send_wr->send_wr.opcode = IB_WR_SEND;
mad_send_wr->send_wr.send_flags = IB_SEND_SIGNALED;
mad_send_wr->send_wr.wr.ud.remote_qpn = remote_qpn;
@@ -820,13 +877,11 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
mad_send_wr->send_wr.wr.ud.pkey_index = pkey_index;
if (rmpp_active) {
- struct ib_rmpp_mad *rmpp_mad = mad_send_wr->send_buf.mad;
- rmpp_mad->rmpp_hdr.paylen_newwin = cpu_to_be32(hdr_len -
- IB_MGMT_RMPP_HDR + data_len);
- rmpp_mad->rmpp_hdr.rmpp_version = mad_agent->rmpp_version;
- rmpp_mad->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_DATA;
- ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr,
- IB_MGMT_RMPP_FLAG_ACTIVE);
+ ret = alloc_send_rmpp_list(mad_send_wr, gfp_mask);
+ if (ret) {
+ kfree(buf);
+ return ERR_PTR(ret);
+ }
}
mad_send_wr->send_buf.mad_agent = mad_agent;
@@ -835,14 +890,50 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
}
EXPORT_SYMBOL(ib_create_send_mad);
+void *ib_get_rmpp_segment(struct ib_mad_send_buf *send_buf, int seg_num)
+{
+ struct ib_mad_send_wr_private *mad_send_wr;
+ struct list_head *list;
+
+ mad_send_wr = container_of(send_buf, struct ib_mad_send_wr_private,
+ send_buf);
+ list = &mad_send_wr->cur_seg->list;
+
+ if (mad_send_wr->cur_seg->num < seg_num) {
+ list_for_each_entry(mad_send_wr->cur_seg, list, list)
+ if (mad_send_wr->cur_seg->num == seg_num)
+ break;
+ } else if (mad_send_wr->cur_seg->num > seg_num) {
+ list_for_each_entry_reverse(mad_send_wr->cur_seg, list, list)
+ if (mad_send_wr->cur_seg->num == seg_num)
+ break;
+ }
+ return mad_send_wr->cur_seg->data;
+}
+EXPORT_SYMBOL(ib_get_rmpp_segment);
+
+static inline void *ib_get_payload(struct ib_mad_send_wr_private *mad_send_wr)
+{
+ if (mad_send_wr->send_buf.seg_count)
+ return ib_get_rmpp_segment(&mad_send_wr->send_buf,
+ mad_send_wr->seg_num);
+ else
+ return mad_send_wr->send_buf.mad +
+ mad_send_wr->send_buf.hdr_len;
+}
+
void ib_free_send_mad(struct ib_mad_send_buf *send_buf)
{
struct ib_mad_agent_private *mad_agent_priv;
+ struct ib_mad_send_wr_private *mad_send_wr;
mad_agent_priv = container_of(send_buf->mad_agent,
struct ib_mad_agent_private, agent);
- kfree(send_buf->mad);
+ mad_send_wr = container_of(send_buf, struct ib_mad_send_wr_private,
+ send_buf);
+ free_send_rmpp_list(mad_send_wr);
+ kfree(send_buf->mad);
if (atomic_dec_and_test(&mad_agent_priv->refcount))
wake_up(&mad_agent_priv->wait);
}
@@ -865,10 +956,17 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr)
mad_agent = mad_send_wr->send_buf.mad_agent;
sge = mad_send_wr->sg_list;
- sge->addr = dma_map_single(mad_agent->device->dma_device,
- mad_send_wr->send_buf.mad, sge->length,
- DMA_TO_DEVICE);
- pci_unmap_addr_set(mad_send_wr, mapping, sge->addr);
+ sge[0].addr = dma_map_single(mad_agent->device->dma_device,
+ mad_send_wr->send_buf.mad,
+ sge[0].length,
+ DMA_TO_DEVICE);
+ pci_unmap_addr_set(mad_send_wr, header_mapping, sge[0].addr);
+
+ sge[1].addr = dma_map_single(mad_agent->device->dma_device,
+ ib_get_payload(mad_send_wr),
+ sge[1].length,
+ DMA_TO_DEVICE);
+ pci_unmap_addr_set(mad_send_wr, payload_mapping, sge[1].addr);
spin_lock_irqsave(&qp_info->send_queue.lock, flags);
if (qp_info->send_queue.count < qp_info->send_queue.max_active) {
@@ -885,11 +983,14 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr)
list_add_tail(&mad_send_wr->mad_list.list, list);
}
spin_unlock_irqrestore(&qp_info->send_queue.lock, flags);
- if (ret)
+ if (ret) {
dma_unmap_single(mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, mapping),
- sge->length, DMA_TO_DEVICE);
-
+ pci_unmap_addr(mad_send_wr, header_mapping),
+ sge[0].length, DMA_TO_DEVICE);
+ dma_unmap_single(mad_agent->device->dma_device,
+ pci_unmap_addr(mad_send_wr, payload_mapping),
+ sge[1].length, DMA_TO_DEVICE);
+ }
return ret;
}
@@ -1661,9 +1762,7 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv,
port_priv->device->node_type,
port_priv->port_num))
goto out;
- if (!smi_check_local_dr_smp(&recv->mad.smp,
- port_priv->device,
- port_priv->port_num))
+ if (!smi_check_local_smp(&recv->mad.smp, port_priv->device))
goto out;
}
@@ -1862,8 +1961,11 @@ static void ib_mad_send_done_handler(struct ib_mad_port_private *port_priv,
retry:
dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, mapping),
+ pci_unmap_addr(mad_send_wr, header_mapping),
mad_send_wr->sg_list[0].length, DMA_TO_DEVICE);
+ dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device,
+ pci_unmap_addr(mad_send_wr, payload_mapping),
+ mad_send_wr->sg_list[1].length, DMA_TO_DEVICE);
queued_send_wr = NULL;
spin_lock_irqsave(&send_queue->lock, flags);
list_del(&mad_list->list);
@@ -2262,8 +2364,12 @@ static void timeout_sends(void *data)
static void ib_mad_thread_completion_handler(struct ib_cq *cq, void *arg)
{
struct ib_mad_port_private *port_priv = cq->cq_context;
+ unsigned long flags;
- queue_work(port_priv->wq, &port_priv->work);
+ spin_lock_irqsave(&ib_mad_port_list_lock, flags);
+ if (!list_empty(&port_priv->port_list))
+ queue_work(port_priv->wq, &port_priv->work);
+ spin_unlock_irqrestore(&ib_mad_port_list_lock, flags);
}
/*
@@ -2575,18 +2681,23 @@ static int ib_mad_port_open(struct ib_device *device,
}
INIT_WORK(&port_priv->work, ib_mad_completion_handler, port_priv);
+ spin_lock_irqsave(&ib_mad_port_list_lock, flags);
+ list_add_tail(&port_priv->port_list, &ib_mad_port_list);
+ spin_unlock_irqrestore(&ib_mad_port_list_lock, flags);
+
ret = ib_mad_port_start(port_priv);
if (ret) {
printk(KERN_ERR PFX "Couldn't start port\n");
goto error9;
}
- spin_lock_irqsave(&ib_mad_port_list_lock, flags);
- list_add_tail(&port_priv->port_list, &ib_mad_port_list);
- spin_unlock_irqrestore(&ib_mad_port_list_lock, flags);
return 0;
error9:
+ spin_lock_irqsave(&ib_mad_port_list_lock, flags);
+ list_del_init(&port_priv->port_list);
+ spin_unlock_irqrestore(&ib_mad_port_list_lock, flags);
+
destroy_workqueue(port_priv->wq);
error8:
destroy_mad_qp(&port_priv->qp_info[1]);
@@ -2623,11 +2734,9 @@ static int ib_mad_port_close(struct ib_device *device, int port_num)
printk(KERN_ERR PFX "Port %d not found\n", port_num);
return -ENODEV;
}
- list_del(&port_priv->port_list);
+ list_del_init(&port_priv->port_list);
spin_unlock_irqrestore(&ib_mad_port_list_lock, flags);
- /* Stop processing completions. */
- flush_workqueue(port_priv->wq);
destroy_workqueue(port_priv->wq);
destroy_mad_qp(&port_priv->qp_info[1]);
destroy_mad_qp(&port_priv->qp_info[0]);
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index 570f78682af3..a7125d4b5ccf 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -31,7 +31,7 @@
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
- * $Id: mad_priv.h 2730 2005-06-28 16:43:03Z sean.hefty $
+ * $Id: mad_priv.h 5596 2006-03-03 01:00:07Z sean.hefty $
*/
#ifndef __IB_MAD_PRIV_H__
@@ -85,6 +85,12 @@ struct ib_mad_private {
} mad;
} __attribute__ ((packed));
+struct ib_rmpp_segment {
+ struct list_head list;
+ u32 num;
+ u8 data[0];
+};
+
struct ib_mad_agent_private {
struct list_head agent_list;
struct ib_mad_agent agent;
@@ -119,7 +125,8 @@ struct ib_mad_send_wr_private {
struct list_head agent_list;
struct ib_mad_agent_private *mad_agent_priv;
struct ib_mad_send_buf send_buf;
- DECLARE_PCI_UNMAP_ADDR(mapping)
+ DECLARE_PCI_UNMAP_ADDR(header_mapping)
+ DECLARE_PCI_UNMAP_ADDR(payload_mapping)
struct ib_send_wr send_wr;
struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG];
__be64 tid;
@@ -130,11 +137,12 @@ struct ib_mad_send_wr_private {
enum ib_wc_status status;
/* RMPP control */
+ struct list_head rmpp_list;
+ struct ib_rmpp_segment *last_ack_seg;
+ struct ib_rmpp_segment *cur_seg;
int last_ack;
int seg_num;
int newwin;
- int total_seg;
- int data_offset;
int pad;
};
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index 3249e1d8c07b..bacfdd5bddad 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -111,14 +111,14 @@ static int data_offset(u8 mgmt_class)
return IB_MGMT_RMPP_HDR;
}
-static void format_ack(struct ib_rmpp_mad *ack,
+static void format_ack(struct ib_mad_send_buf *msg,
struct ib_rmpp_mad *data,
struct mad_rmpp_recv *rmpp_recv)
{
+ struct ib_rmpp_mad *ack = msg->mad;
unsigned long flags;
- memcpy(&ack->mad_hdr, &data->mad_hdr,
- data_offset(data->mad_hdr.mgmt_class));
+ memcpy(ack, &data->mad_hdr, msg->hdr_len);
ack->mad_hdr.method ^= IB_MGMT_METHOD_RESP;
ack->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_ACK;
@@ -135,16 +135,16 @@ static void ack_recv(struct mad_rmpp_recv *rmpp_recv,
struct ib_mad_recv_wc *recv_wc)
{
struct ib_mad_send_buf *msg;
- int ret;
+ int ret, hdr_len;
+ hdr_len = data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class);
msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp,
- recv_wc->wc->pkey_index, 1, IB_MGMT_RMPP_HDR,
- IB_MGMT_RMPP_DATA, GFP_KERNEL);
+ recv_wc->wc->pkey_index, 1, hdr_len,
+ 0, GFP_KERNEL);
if (!msg)
return;
- format_ack(msg->mad, (struct ib_rmpp_mad *) recv_wc->recv_buf.mad,
- rmpp_recv);
+ format_ack(msg, (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv);
msg->ah = rmpp_recv->ah;
ret = ib_post_send_mad(msg, NULL);
if (ret)
@@ -156,16 +156,17 @@ static struct ib_mad_send_buf *alloc_response_msg(struct ib_mad_agent *agent,
{
struct ib_mad_send_buf *msg;
struct ib_ah *ah;
+ int hdr_len;
ah = ib_create_ah_from_wc(agent->qp->pd, recv_wc->wc,
recv_wc->recv_buf.grh, agent->port_num);
if (IS_ERR(ah))
return (void *) ah;
+ hdr_len = data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class);
msg = ib_create_send_mad(agent, recv_wc->wc->src_qp,
recv_wc->wc->pkey_index, 1,
- IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA,
- GFP_KERNEL);
+ hdr_len, 0, GFP_KERNEL);
if (IS_ERR(msg))
ib_destroy_ah(ah);
else
@@ -195,8 +196,7 @@ static void nack_recv(struct ib_mad_agent_private *agent,
return;
rmpp_mad = msg->mad;
- memcpy(rmpp_mad, recv_wc->recv_buf.mad,
- data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class));
+ memcpy(rmpp_mad, recv_wc->recv_buf.mad, msg->hdr_len);
rmpp_mad->mad_hdr.method ^= IB_MGMT_METHOD_RESP;
rmpp_mad->rmpp_hdr.rmpp_version = IB_MGMT_RMPP_VERSION;
@@ -433,44 +433,6 @@ static struct ib_mad_recv_wc * complete_rmpp(struct mad_rmpp_recv *rmpp_recv)
return rmpp_wc;
}
-void ib_coalesce_recv_mad(struct ib_mad_recv_wc *mad_recv_wc, void *buf)
-{
- struct ib_mad_recv_buf *seg_buf;
- struct ib_rmpp_mad *rmpp_mad;
- void *data;
- int size, len, offset;
- u8 flags;
-
- len = mad_recv_wc->mad_len;
- if (len <= sizeof(struct ib_mad)) {
- memcpy(buf, mad_recv_wc->recv_buf.mad, len);
- return;
- }
-
- offset = data_offset(mad_recv_wc->recv_buf.mad->mad_hdr.mgmt_class);
-
- list_for_each_entry(seg_buf, &mad_recv_wc->rmpp_list, list) {
- rmpp_mad = (struct ib_rmpp_mad *)seg_buf->mad;
- flags = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr);
-
- if (flags & IB_MGMT_RMPP_FLAG_FIRST) {
- data = rmpp_mad;
- size = sizeof(*rmpp_mad);
- } else {
- data = (void *) rmpp_mad + offset;
- if (flags & IB_MGMT_RMPP_FLAG_LAST)
- size = len;
- else
- size = sizeof(*rmpp_mad) - offset;
- }
-
- memcpy(buf, data, size);
- len -= size;
- buf += size;
- }
-}
-EXPORT_SYMBOL(ib_coalesce_recv_mad);
-
static struct ib_mad_recv_wc *
continue_rmpp(struct ib_mad_agent_private *agent,
struct ib_mad_recv_wc *mad_recv_wc)
@@ -570,50 +532,33 @@ start_rmpp(struct ib_mad_agent_private *agent,
return mad_recv_wc;
}
-static inline u64 get_seg_addr(struct ib_mad_send_wr_private *mad_send_wr)
-{
- return mad_send_wr->sg_list[0].addr + mad_send_wr->data_offset +
- (sizeof(struct ib_rmpp_mad) - mad_send_wr->data_offset) *
- (mad_send_wr->seg_num - 1);
-}
-
static int send_next_seg(struct ib_mad_send_wr_private *mad_send_wr)
{
struct ib_rmpp_mad *rmpp_mad;
int timeout;
- u32 paylen;
+ u32 paylen = 0;
rmpp_mad = mad_send_wr->send_buf.mad;
ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE);
- rmpp_mad->rmpp_hdr.seg_num = cpu_to_be32(mad_send_wr->seg_num);
+ rmpp_mad->rmpp_hdr.seg_num = cpu_to_be32(++mad_send_wr->seg_num);
if (mad_send_wr->seg_num == 1) {
rmpp_mad->rmpp_hdr.rmpp_rtime_flags |= IB_MGMT_RMPP_FLAG_FIRST;
- paylen = mad_send_wr->total_seg * IB_MGMT_RMPP_DATA -
+ paylen = mad_send_wr->send_buf.seg_count * IB_MGMT_RMPP_DATA -
mad_send_wr->pad;
- rmpp_mad->rmpp_hdr.paylen_newwin = cpu_to_be32(paylen);
- mad_send_wr->sg_list[0].length = sizeof(struct ib_rmpp_mad);
- } else {
- mad_send_wr->send_wr.num_sge = 2;
- mad_send_wr->sg_list[0].length = mad_send_wr->data_offset;
- mad_send_wr->sg_list[1].addr = get_seg_addr(mad_send_wr);
- mad_send_wr->sg_list[1].length = sizeof(struct ib_rmpp_mad) -
- mad_send_wr->data_offset;
- mad_send_wr->sg_list[1].lkey = mad_send_wr->sg_list[0].lkey;
- rmpp_mad->rmpp_hdr.paylen_newwin = 0;
}
- if (mad_send_wr->seg_num == mad_send_wr->total_seg) {
+ if (mad_send_wr->seg_num == mad_send_wr->send_buf.seg_count) {
rmpp_mad->rmpp_hdr.rmpp_rtime_flags |= IB_MGMT_RMPP_FLAG_LAST;
paylen = IB_MGMT_RMPP_DATA - mad_send_wr->pad;
- rmpp_mad->rmpp_hdr.paylen_newwin = cpu_to_be32(paylen);
}
+ rmpp_mad->rmpp_hdr.paylen_newwin = cpu_to_be32(paylen);
/* 2 seconds for an ACK until we can find the packet lifetime */
timeout = mad_send_wr->send_buf.timeout_ms;
if (!timeout || timeout > 2000)
mad_send_wr->timeout = msecs_to_jiffies(2000);
- mad_send_wr->seg_num++;
+
return ib_send_mad(mad_send_wr);
}
@@ -629,7 +574,7 @@ static void abort_send(struct ib_mad_agent_private *agent, __be64 tid,
if (!mad_send_wr)
goto out; /* Unmatched send */
- if ((mad_send_wr->last_ack == mad_send_wr->total_seg) ||
+ if ((mad_send_wr->last_ack == mad_send_wr->send_buf.seg_count) ||
(!mad_send_wr->timeout) || (mad_send_wr->status != IB_WC_SUCCESS))
goto out; /* Send is already done */
@@ -645,6 +590,18 @@ out:
spin_unlock_irqrestore(&agent->lock, flags);
}
+static inline void adjust_last_ack(struct ib_mad_send_wr_private *wr,
+ int seg_num)
+{
+ struct list_head *list;
+
+ wr->last_ack = seg_num;
+ list = &wr->last_ack_seg->list;
+ list_for_each_entry(wr->last_ack_seg, list, list)
+ if (wr->last_ack_seg->num == seg_num)
+ break;
+}
+
static void process_rmpp_ack(struct ib_mad_agent_private *agent,
struct ib_mad_recv_wc *mad_recv_wc)
{
@@ -675,11 +632,12 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent,
if (!mad_send_wr)
goto out; /* Unmatched ACK */
- if ((mad_send_wr->last_ack == mad_send_wr->total_seg) ||
+ if ((mad_send_wr->last_ack == mad_send_wr->send_buf.seg_count) ||
(!mad_send_wr->timeout) || (mad_send_wr->status != IB_WC_SUCCESS))
goto out; /* Send is already done */
- if (seg_num > mad_send_wr->total_seg || seg_num > mad_send_wr->newwin) {
+ if (seg_num > mad_send_wr->send_buf.seg_count ||
+ seg_num > mad_send_wr->newwin) {
spin_unlock_irqrestore(&agent->lock, flags);
abort_send(agent, rmpp_mad->mad_hdr.tid,
IB_MGMT_RMPP_STATUS_S2B);
@@ -691,11 +649,11 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent,
goto out; /* Old ACK */
if (seg_num > mad_send_wr->last_ack) {
- mad_send_wr->last_ack = seg_num;
+ adjust_last_ack(mad_send_wr, seg_num);
mad_send_wr->retries = mad_send_wr->send_buf.retries;
}
mad_send_wr->newwin = newwin;
- if (mad_send_wr->last_ack == mad_send_wr->total_seg) {
+ if (mad_send_wr->last_ack == mad_send_wr->send_buf.seg_count) {
/* If no response is expected, the ACK completes the send */
if (!mad_send_wr->send_buf.timeout_ms) {
struct ib_mad_send_wc wc;
@@ -714,7 +672,7 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent,
mad_send_wr->send_buf.timeout_ms);
} else if (mad_send_wr->refcount == 1 &&
mad_send_wr->seg_num < mad_send_wr->newwin &&
- mad_send_wr->seg_num <= mad_send_wr->total_seg) {
+ mad_send_wr->seg_num < mad_send_wr->send_buf.seg_count) {
/* Send failure will just result in a timeout/retry */
ret = send_next_seg(mad_send_wr);
if (ret)
@@ -838,31 +796,19 @@ out:
int ib_send_rmpp_mad(struct ib_mad_send_wr_private *mad_send_wr)
{
struct ib_rmpp_mad *rmpp_mad;
- int i, total_len, ret;
+ int ret;
rmpp_mad = mad_send_wr->send_buf.mad;
if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
IB_MGMT_RMPP_FLAG_ACTIVE))
return IB_RMPP_RESULT_UNHANDLED;
- if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA)
+ if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA) {
+ mad_send_wr->seg_num = 1;
return IB_RMPP_RESULT_INTERNAL;
+ }
- if (mad_send_wr->send_wr.num_sge > 1)
- return -EINVAL; /* TODO: support num_sge > 1 */
-
- mad_send_wr->seg_num = 1;
mad_send_wr->newwin = 1;
- mad_send_wr->data_offset = data_offset(rmpp_mad->mad_hdr.mgmt_class);
-
- total_len = 0;
- for (i = 0; i < mad_send_wr->send_wr.num_sge; i++)
- total_len += mad_send_wr->send_wr.sg_list[i].length;
-
- mad_send_wr->total_seg = (total_len - mad_send_wr->data_offset) /
- (sizeof(struct ib_rmpp_mad) - mad_send_wr->data_offset);
- mad_send_wr->pad = total_len - IB_MGMT_RMPP_HDR -
- be32_to_cpu(rmpp_mad->rmpp_hdr.paylen_newwin);
/* We need to wait for the final ACK even if there isn't a response */
mad_send_wr->refcount += (mad_send_wr->timeout == 0);
@@ -893,14 +839,14 @@ int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr,
if (!mad_send_wr->timeout)
return IB_RMPP_RESULT_PROCESSED; /* Response received */
- if (mad_send_wr->last_ack == mad_send_wr->total_seg) {
+ if (mad_send_wr->last_ack == mad_send_wr->send_buf.seg_count) {
mad_send_wr->timeout =
msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms);
return IB_RMPP_RESULT_PROCESSED; /* Send done */
}
- if (mad_send_wr->seg_num > mad_send_wr->newwin ||
- mad_send_wr->seg_num > mad_send_wr->total_seg)
+ if (mad_send_wr->seg_num == mad_send_wr->newwin ||
+ mad_send_wr->seg_num == mad_send_wr->send_buf.seg_count)
return IB_RMPP_RESULT_PROCESSED; /* Wait for ACK */
ret = send_next_seg(mad_send_wr);
@@ -921,10 +867,12 @@ int ib_retry_rmpp(struct ib_mad_send_wr_private *mad_send_wr)
IB_MGMT_RMPP_FLAG_ACTIVE))
return IB_RMPP_RESULT_UNHANDLED; /* RMPP not active */
- if (mad_send_wr->last_ack == mad_send_wr->total_seg)
+ if (mad_send_wr->last_ack == mad_send_wr->send_buf.seg_count)
return IB_RMPP_RESULT_PROCESSED;
- mad_send_wr->seg_num = mad_send_wr->last_ack + 1;
+ mad_send_wr->seg_num = mad_send_wr->last_ack;
+ mad_send_wr->cur_seg = mad_send_wr->last_ack_seg;
+
ret = send_next_seg(mad_send_wr);
if (ret)
return IB_RMPP_RESULT_PROCESSED;
diff --git a/drivers/infiniband/core/smi.h b/drivers/infiniband/core/smi.h
index 2b3c40198f81..3011bfd86dc5 100644
--- a/drivers/infiniband/core/smi.h
+++ b/drivers/infiniband/core/smi.h
@@ -49,19 +49,16 @@ extern int smi_check_forward_dr_smp(struct ib_smp *smp);
extern int smi_handle_dr_smp_send(struct ib_smp *smp,
u8 node_type,
int port_num);
-extern int smi_check_local_dr_smp(struct ib_smp *smp,
- struct ib_device *device,
- int port_num);
/*
* Return 1 if the SMP should be handled by the local SMA/SM via process_mad
*/
-static inline int smi_check_local_smp(struct ib_mad_agent *mad_agent,
- struct ib_smp *smp)
+static inline int smi_check_local_smp(struct ib_smp *smp,
+ struct ib_device *device)
{
/* C14-9:3 -- We're at the end of the DR segment of path */
/* C14-9:4 -- Hop Pointer = Hop Count + 1 -> give to SMA/SM */
- return ((mad_agent->device->process_mad &&
+ return ((device->process_mad &&
!ib_get_smp_direction(smp) &&
(smp->hop_ptr == smp->hop_cnt + 1)));
}
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 5982d687a000..15121cb5a1f6 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -112,7 +112,7 @@ static ssize_t state_show(struct ib_port *p, struct port_attribute *unused,
return ret;
return sprintf(buf, "%d: %s\n", attr.state,
- attr.state >= 0 && attr.state <= ARRAY_SIZE(state_name) ?
+ attr.state >= 0 && attr.state < ARRAY_SIZE(state_name) ?
state_name[attr.state] : "UNKNOWN");
}
@@ -472,8 +472,10 @@ alloc_group_attrs(ssize_t (*show)(struct ib_port *,
goto err;
if (snprintf(element->name, sizeof(element->name),
- "%d", i) >= sizeof(element->name))
+ "%d", i) >= sizeof(element->name)) {
+ kfree(element);
goto err;
+ }
element->attr.attr.name = element->name;
element->attr.attr.mode = S_IRUGO;
@@ -628,14 +630,42 @@ static ssize_t show_node_guid(struct class_device *cdev, char *buf)
be16_to_cpu(((__be16 *) &dev->node_guid)[3]));
}
+static ssize_t show_node_desc(struct class_device *cdev, char *buf)
+{
+ struct ib_device *dev = container_of(cdev, struct ib_device, class_dev);
+
+ return sprintf(buf, "%.64s\n", dev->node_desc);
+}
+
+static ssize_t set_node_desc(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct ib_device *dev = container_of(cdev, struct ib_device, class_dev);
+ struct ib_device_modify desc = {};
+ int ret;
+
+ if (!dev->modify_device)
+ return -EIO;
+
+ memcpy(desc.node_desc, buf, min_t(int, count, 64));
+ ret = ib_modify_device(dev, IB_DEVICE_MODIFY_NODE_DESC, &desc);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
static CLASS_DEVICE_ATTR(node_type, S_IRUGO, show_node_type, NULL);
static CLASS_DEVICE_ATTR(sys_image_guid, S_IRUGO, show_sys_image_guid, NULL);
static CLASS_DEVICE_ATTR(node_guid, S_IRUGO, show_node_guid, NULL);
+static CLASS_DEVICE_ATTR(node_desc, S_IRUGO | S_IWUSR, show_node_desc,
+ set_node_desc);
static struct class_device_attribute *ib_class_attributes[] = {
&class_device_attr_node_type,
&class_device_attr_sys_image_guid,
- &class_device_attr_node_guid
+ &class_device_attr_node_guid,
+ &class_device_attr_node_desc
};
static struct class ib_class = {
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index c908de8db5a9..fb6cd42601f9 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -31,7 +31,7 @@
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
- * $Id: user_mad.c 4010 2005-11-09 23:11:56Z roland $
+ * $Id: user_mad.c 5596 2006-03-03 01:00:07Z sean.hefty $
*/
#include
@@ -121,6 +121,7 @@ struct ib_umad_file {
struct ib_umad_packet {
struct ib_mad_send_buf *msg;
+ struct ib_mad_recv_wc *recv_wc;
struct list_head list;
int length;
struct ib_user_mad mad;
@@ -176,31 +177,32 @@ static int queue_packet(struct ib_umad_file *file,
return ret;
}
+static int data_offset(u8 mgmt_class)
+{
+ if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM)
+ return IB_MGMT_SA_HDR;
+ else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) &&
+ (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END))
+ return IB_MGMT_VENDOR_HDR;
+ else
+ return IB_MGMT_RMPP_HDR;
+}
+
static void send_handler(struct ib_mad_agent *agent,
struct ib_mad_send_wc *send_wc)
{
struct ib_umad_file *file = agent->context;
- struct ib_umad_packet *timeout;
struct ib_umad_packet *packet = send_wc->send_buf->context[0];
ib_destroy_ah(packet->msg->ah);
ib_free_send_mad(packet->msg);
if (send_wc->status == IB_WC_RESP_TIMEOUT_ERR) {
- timeout = kzalloc(sizeof *timeout + IB_MGMT_MAD_HDR, GFP_KERNEL);
- if (!timeout)
- goto out;
-
- timeout->length = IB_MGMT_MAD_HDR;
- timeout->mad.hdr.id = packet->mad.hdr.id;
- timeout->mad.hdr.status = ETIMEDOUT;
- memcpy(timeout->mad.data, packet->mad.data,
- sizeof (struct ib_mad_hdr));
-
- if (queue_packet(file, agent, timeout))
- kfree(timeout);
+ packet->length = IB_MGMT_MAD_HDR;
+ packet->mad.hdr.status = ETIMEDOUT;
+ if (!queue_packet(file, agent, packet))
+ return;
}
-out:
kfree(packet);
}
@@ -209,22 +211,20 @@ static void recv_handler(struct ib_mad_agent *agent,
{
struct ib_umad_file *file = agent->context;
struct ib_umad_packet *packet;
- int length;
if (mad_recv_wc->wc->status != IB_WC_SUCCESS)
- goto out;
+ goto err1;
- length = mad_recv_wc->mad_len;
- packet = kzalloc(sizeof *packet + length, GFP_KERNEL);
+ packet = kzalloc(sizeof *packet, GFP_KERNEL);
if (!packet)
- goto out;
+ goto err1;
- packet->length = length;
-
- ib_coalesce_recv_mad(mad_recv_wc, packet->mad.data);
+ packet->length = mad_recv_wc->mad_len;
+ packet->recv_wc = mad_recv_wc;
packet->mad.hdr.status = 0;
- packet->mad.hdr.length = length + sizeof (struct ib_user_mad);
+ packet->mad.hdr.length = sizeof (struct ib_user_mad) +
+ mad_recv_wc->mad_len;
packet->mad.hdr.qpn = cpu_to_be32(mad_recv_wc->wc->src_qp);
packet->mad.hdr.lid = cpu_to_be16(mad_recv_wc->wc->slid);
packet->mad.hdr.sl = mad_recv_wc->wc->sl;
@@ -240,12 +240,79 @@ static void recv_handler(struct ib_mad_agent *agent,
}
if (queue_packet(file, agent, packet))
- kfree(packet);
+ goto err2;
+ return;
-out:
+err2:
+ kfree(packet);
+err1:
ib_free_recv_mad(mad_recv_wc);
}
+static ssize_t copy_recv_mad(char __user *buf, struct ib_umad_packet *packet,
+ size_t count)
+{
+ struct ib_mad_recv_buf *recv_buf;
+ int left, seg_payload, offset, max_seg_payload;
+
+ /* We need enough room to copy the first (or only) MAD segment. */
+ recv_buf = &packet->recv_wc->recv_buf;
+ if ((packet->length <= sizeof (*recv_buf->mad) &&
+ count < sizeof (packet->mad) + packet->length) ||
+ (packet->length > sizeof (*recv_buf->mad) &&
+ count < sizeof (packet->mad) + sizeof (*recv_buf->mad)))
+ return -EINVAL;
+
+ if (copy_to_user(buf, &packet->mad, sizeof (packet->mad)))
+ return -EFAULT;
+
+ buf += sizeof (packet->mad);
+ seg_payload = min_t(int, packet->length, sizeof (*recv_buf->mad));
+ if (copy_to_user(buf, recv_buf->mad, seg_payload))
+ return -EFAULT;
+
+ if (seg_payload < packet->length) {
+ /*
+ * Multipacket RMPP MAD message. Copy remainder of message.
+ * Note that last segment may have a shorter payload.
+ */
+ if (count < sizeof (packet->mad) + packet->length) {
+ /*
+ * The buffer is too small, return the first RMPP segment,
+ * which includes the RMPP message length.
+ */
+ return -ENOSPC;
+ }
+ offset = data_offset(recv_buf->mad->mad_hdr.mgmt_class);
+ max_seg_payload = sizeof (struct ib_mad) - offset;
+
+ for (left = packet->length - seg_payload, buf += seg_payload;
+ left; left -= seg_payload, buf += seg_payload) {
+ recv_buf = container_of(recv_buf->list.next,
+ struct ib_mad_recv_buf, list);
+ seg_payload = min(left, max_seg_payload);
+ if (copy_to_user(buf, ((void *) recv_buf->mad) + offset,
+ seg_payload))
+ return -EFAULT;
+ }
+ }
+ return sizeof (packet->mad) + packet->length;
+}
+
+static ssize_t copy_send_mad(char __user *buf, struct ib_umad_packet *packet,
+ size_t count)
+{
+ ssize_t size = sizeof (packet->mad) + packet->length;
+
+ if (count < size)
+ return -EINVAL;
+
+ if (copy_to_user(buf, &packet->mad, size))
+ return -EFAULT;
+
+ return size;
+}
+
static ssize_t ib_umad_read(struct file *filp, char __user *buf,
size_t count, loff_t *pos)
{
@@ -253,7 +320,7 @@ static ssize_t ib_umad_read(struct file *filp, char __user *buf,
struct ib_umad_packet *packet;
ssize_t ret;
- if (count < sizeof (struct ib_user_mad) + sizeof (struct ib_mad))
+ if (count < sizeof (struct ib_user_mad))
return -EINVAL;
spin_lock_irq(&file->recv_lock);
@@ -276,28 +343,44 @@ static ssize_t ib_umad_read(struct file *filp, char __user *buf,
spin_unlock_irq(&file->recv_lock);
- if (count < packet->length + sizeof (struct ib_user_mad)) {
- /* Return length needed (and first RMPP segment) if too small */
- if (copy_to_user(buf, &packet->mad,
- sizeof (struct ib_user_mad) + sizeof (struct ib_mad)))
- ret = -EFAULT;
- else
- ret = -ENOSPC;
- } else if (copy_to_user(buf, &packet->mad,
- packet->length + sizeof (struct ib_user_mad)))
- ret = -EFAULT;
+ if (packet->recv_wc)
+ ret = copy_recv_mad(buf, packet, count);
else
- ret = packet->length + sizeof (struct ib_user_mad);
+ ret = copy_send_mad(buf, packet, count);
+
if (ret < 0) {
/* Requeue packet */
spin_lock_irq(&file->recv_lock);
list_add(&packet->list, &file->recv_list);
spin_unlock_irq(&file->recv_lock);
- } else
+ } else {
+ if (packet->recv_wc)
+ ib_free_recv_mad(packet->recv_wc);
kfree(packet);
+ }
return ret;
}
+static int copy_rmpp_mad(struct ib_mad_send_buf *msg, const char __user *buf)
+{
+ int left, seg;
+
+ /* Copy class specific header */
+ if ((msg->hdr_len > IB_MGMT_RMPP_HDR) &&
+ copy_from_user(msg->mad + IB_MGMT_RMPP_HDR, buf + IB_MGMT_RMPP_HDR,
+ msg->hdr_len - IB_MGMT_RMPP_HDR))
+ return -EFAULT;
+
+ /* All headers are in place. Copy data segments. */
+ for (seg = 1, left = msg->data_len, buf += msg->hdr_len; left > 0;
+ seg++, left -= msg->seg_size, buf += msg->seg_size) {
+ if (copy_from_user(ib_get_rmpp_segment(msg, seg), buf,
+ min(left, msg->seg_size)))
+ return -EFAULT;
+ }
+ return 0;
+}
+
static ssize_t ib_umad_write(struct file *filp, const char __user *buf,
size_t count, loff_t *pos)
{
@@ -309,14 +392,12 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf,
struct ib_rmpp_mad *rmpp_mad;
u8 method;
__be64 *tid;
- int ret, length, hdr_len, copy_offset;
- int rmpp_active, has_rmpp_header;
+ int ret, data_len, hdr_len, copy_offset, rmpp_active;
if (count < sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR)
return -EINVAL;
- length = count - sizeof (struct ib_user_mad);
- packet = kmalloc(sizeof *packet + IB_MGMT_RMPP_HDR, GFP_KERNEL);
+ packet = kzalloc(sizeof *packet + IB_MGMT_RMPP_HDR, GFP_KERNEL);
if (!packet)
return -ENOMEM;
@@ -363,35 +444,25 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf,
if (rmpp_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_ADM) {
hdr_len = IB_MGMT_SA_HDR;
copy_offset = IB_MGMT_RMPP_HDR;
- has_rmpp_header = 1;
+ rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
+ IB_MGMT_RMPP_FLAG_ACTIVE;
} else if (rmpp_mad->mad_hdr.mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START &&
rmpp_mad->mad_hdr.mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END) {
- hdr_len = IB_MGMT_VENDOR_HDR;
- copy_offset = IB_MGMT_RMPP_HDR;
- has_rmpp_header = 1;
+ hdr_len = IB_MGMT_VENDOR_HDR;
+ copy_offset = IB_MGMT_RMPP_HDR;
+ rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
+ IB_MGMT_RMPP_FLAG_ACTIVE;
} else {
hdr_len = IB_MGMT_MAD_HDR;
copy_offset = IB_MGMT_MAD_HDR;
- has_rmpp_header = 0;
- }
-
- if (has_rmpp_header)
- rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) &
- IB_MGMT_RMPP_FLAG_ACTIVE;
- else
rmpp_active = 0;
-
- /* Validate that the management class can support RMPP */
- if (rmpp_active && !agent->rmpp_version) {
- ret = -EINVAL;
- goto err_ah;
}
+ data_len = count - sizeof (struct ib_user_mad) - hdr_len;
packet->msg = ib_create_send_mad(agent,
be32_to_cpu(packet->mad.hdr.qpn),
- 0, rmpp_active,
- hdr_len, length - hdr_len,
- GFP_KERNEL);
+ 0, rmpp_active, hdr_len,
+ data_len, GFP_KERNEL);
if (IS_ERR(packet->msg)) {
ret = PTR_ERR(packet->msg);
goto err_ah;
@@ -402,14 +473,21 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf,
packet->msg->retries = packet->mad.hdr.retries;
packet->msg->context[0] = packet;
- /* Copy MAD headers (RMPP header in place) */
+ /* Copy MAD header. Any RMPP header is already in place. */
memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR);
- /* Now, copy rest of message from user into send buffer */
- if (copy_from_user(packet->msg->mad + copy_offset,
- buf + sizeof (struct ib_user_mad) + copy_offset,
- length - copy_offset)) {
- ret = -EFAULT;
- goto err_msg;
+ buf += sizeof (struct ib_user_mad);
+
+ if (!rmpp_active) {
+ if (copy_from_user(packet->msg->mad + copy_offset,
+ buf + copy_offset,
+ hdr_len + data_len - copy_offset)) {
+ ret = -EFAULT;
+ goto err_msg;
+ }
+ } else {
+ ret = copy_rmpp_mad(packet->msg, buf);
+ if (ret)
+ goto err_msg;
}
/*
@@ -433,18 +511,14 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf,
goto err_msg;
up_read(&file->port->mutex);
-
return count;
err_msg:
ib_free_send_mad(packet->msg);
-
err_ah:
ib_destroy_ah(ah);
-
err_up:
up_read(&file->port->mutex);
-
err:
kfree(packet);
return ret;
@@ -627,8 +701,11 @@ static int ib_umad_close(struct inode *inode, struct file *filp)
already_dead = file->agents_dead;
file->agents_dead = 1;
- list_for_each_entry_safe(packet, tmp, &file->recv_list, list)
+ list_for_each_entry_safe(packet, tmp, &file->recv_list, list) {
+ if (packet->recv_wc)
+ ib_free_recv_mad(packet->recv_wc);
kfree(packet);
+ }
list_del(&file->port_list);
diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h
index f7eecbc6af6c..3372d67ff139 100644
--- a/drivers/infiniband/core/uverbs.h
+++ b/drivers/infiniband/core/uverbs.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2005 Topspin Communications. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2005 Voltaire, Inc. All rights reserved.
* Copyright (c) 2005 PathScale, Inc. All rights reserved.
@@ -178,10 +178,12 @@ IB_UVERBS_DECLARE_CMD(reg_mr);
IB_UVERBS_DECLARE_CMD(dereg_mr);
IB_UVERBS_DECLARE_CMD(create_comp_channel);
IB_UVERBS_DECLARE_CMD(create_cq);
+IB_UVERBS_DECLARE_CMD(resize_cq);
IB_UVERBS_DECLARE_CMD(poll_cq);
IB_UVERBS_DECLARE_CMD(req_notify_cq);
IB_UVERBS_DECLARE_CMD(destroy_cq);
IB_UVERBS_DECLARE_CMD(create_qp);
+IB_UVERBS_DECLARE_CMD(query_qp);
IB_UVERBS_DECLARE_CMD(modify_qp);
IB_UVERBS_DECLARE_CMD(destroy_qp);
IB_UVERBS_DECLARE_CMD(post_send);
@@ -193,6 +195,7 @@ IB_UVERBS_DECLARE_CMD(attach_mcast);
IB_UVERBS_DECLARE_CMD(detach_mcast);
IB_UVERBS_DECLARE_CMD(create_srq);
IB_UVERBS_DECLARE_CMD(modify_srq);
+IB_UVERBS_DECLARE_CMD(query_srq);
IB_UVERBS_DECLARE_CMD(destroy_srq);
#endif /* UVERBS_H */
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index 407b6284d7d5..9f69bd48eb1b 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1,7 +1,8 @@
/*
* Copyright (c) 2005 Topspin Communications. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
* Copyright (c) 2005 PathScale, Inc. All rights reserved.
+ * Copyright (c) 2006 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -675,6 +676,46 @@ err:
return ret;
}
+ssize_t ib_uverbs_resize_cq(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_resize_cq cmd;
+ struct ib_uverbs_resize_cq_resp resp;
+ struct ib_udata udata;
+ struct ib_cq *cq;
+ int ret = -EINVAL;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ INIT_UDATA(&udata, buf + sizeof cmd,
+ (unsigned long) cmd.response + sizeof resp,
+ in_len - sizeof cmd, out_len - sizeof resp);
+
+ mutex_lock(&ib_uverbs_idr_mutex);
+
+ cq = idr_find(&ib_uverbs_cq_idr, cmd.cq_handle);
+ if (!cq || cq->uobject->context != file->ucontext || !cq->device->resize_cq)
+ goto out;
+
+ ret = cq->device->resize_cq(cq, cmd.cqe, &udata);
+ if (ret)
+ goto out;
+
+ memset(&resp, 0, sizeof resp);
+ resp.cqe = cq->cqe;
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp))
+ ret = -EFAULT;
+
+out:
+ mutex_unlock(&ib_uverbs_idr_mutex);
+
+ return ret ? ret : in_len;
+}
+
ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -956,6 +997,106 @@ err_up:
return ret;
}
+ssize_t ib_uverbs_query_qp(struct ib_uverbs_file *file,
+ const char __user *buf, int in_len,
+ int out_len)
+{
+ struct ib_uverbs_query_qp cmd;
+ struct ib_uverbs_query_qp_resp resp;
+ struct ib_qp *qp;
+ struct ib_qp_attr *attr;
+ struct ib_qp_init_attr *init_attr;
+ int ret;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ attr = kmalloc(sizeof *attr, GFP_KERNEL);
+ init_attr = kmalloc(sizeof *init_attr, GFP_KERNEL);
+ if (!attr || !init_attr) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mutex_lock(&ib_uverbs_idr_mutex);
+
+ qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle);
+ if (qp && qp->uobject->context == file->ucontext)
+ ret = ib_query_qp(qp, attr, cmd.attr_mask, init_attr);
+ else
+ ret = -EINVAL;
+
+ mutex_unlock(&ib_uverbs_idr_mutex);
+
+ if (ret)
+ goto out;
+
+ memset(&resp, 0, sizeof resp);
+
+ resp.qp_state = attr->qp_state;
+ resp.cur_qp_state = attr->cur_qp_state;
+ resp.path_mtu = attr->path_mtu;
+ resp.path_mig_state = attr->path_mig_state;
+ resp.qkey = attr->qkey;
+ resp.rq_psn = attr->rq_psn;
+ resp.sq_psn = attr->sq_psn;
+ resp.dest_qp_num = attr->dest_qp_num;
+ resp.qp_access_flags = attr->qp_access_flags;
+ resp.pkey_index = attr->pkey_index;
+ resp.alt_pkey_index = attr->alt_pkey_index;
+ resp.en_sqd_async_notify = attr->en_sqd_async_notify;
+ resp.max_rd_atomic = attr->max_rd_atomic;
+ resp.max_dest_rd_atomic = attr->max_dest_rd_atomic;
+ resp.min_rnr_timer = attr->min_rnr_timer;
+ resp.port_num = attr->port_num;
+ resp.timeout = attr->timeout;
+ resp.retry_cnt = attr->retry_cnt;
+ resp.rnr_retry = attr->rnr_retry;
+ resp.alt_port_num = attr->alt_port_num;
+ resp.alt_timeout = attr->alt_timeout;
+
+ memcpy(resp.dest.dgid, attr->ah_attr.grh.dgid.raw, 16);
+ resp.dest.flow_label = attr->ah_attr.grh.flow_label;
+ resp.dest.sgid_index = attr->ah_attr.grh.sgid_index;
+ resp.dest.hop_limit = attr->ah_attr.grh.hop_limit;
+ resp.dest.traffic_class = attr->ah_attr.grh.traffic_class;
+ resp.dest.dlid = attr->ah_attr.dlid;
+ resp.dest.sl = attr->ah_attr.sl;
+ resp.dest.src_path_bits = attr->ah_attr.src_path_bits;
+ resp.dest.static_rate = attr->ah_attr.static_rate;
+ resp.dest.is_global = !!(attr->ah_attr.ah_flags & IB_AH_GRH);
+ resp.dest.port_num = attr->ah_attr.port_num;
+
+ memcpy(resp.alt_dest.dgid, attr->alt_ah_attr.grh.dgid.raw, 16);
+ resp.alt_dest.flow_label = attr->alt_ah_attr.grh.flow_label;
+ resp.alt_dest.sgid_index = attr->alt_ah_attr.grh.sgid_index;
+ resp.alt_dest.hop_limit = attr->alt_ah_attr.grh.hop_limit;
+ resp.alt_dest.traffic_class = attr->alt_ah_attr.grh.traffic_class;
+ resp.alt_dest.dlid = attr->alt_ah_attr.dlid;
+ resp.alt_dest.sl = attr->alt_ah_attr.sl;
+ resp.alt_dest.src_path_bits = attr->alt_ah_attr.src_path_bits;
+ resp.alt_dest.static_rate = attr->alt_ah_attr.static_rate;
+ resp.alt_dest.is_global = !!(attr->alt_ah_attr.ah_flags & IB_AH_GRH);
+ resp.alt_dest.port_num = attr->alt_ah_attr.port_num;
+
+ resp.max_send_wr = init_attr->cap.max_send_wr;
+ resp.max_recv_wr = init_attr->cap.max_recv_wr;
+ resp.max_send_sge = init_attr->cap.max_send_sge;
+ resp.max_recv_sge = init_attr->cap.max_recv_sge;
+ resp.max_inline_data = init_attr->cap.max_inline_data;
+ resp.sq_sig_all = init_attr->sq_sig_type == IB_SIGNAL_ALL_WR;
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp))
+ ret = -EFAULT;
+
+out:
+ kfree(attr);
+ kfree(init_attr);
+
+ return ret ? ret : in_len;
+}
+
ssize_t ib_uverbs_modify_qp(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
@@ -990,7 +1131,7 @@ ssize_t ib_uverbs_modify_qp(struct ib_uverbs_file *file,
attr->dest_qp_num = cmd.dest_qp_num;
attr->qp_access_flags = cmd.qp_access_flags;
attr->pkey_index = cmd.pkey_index;
- attr->alt_pkey_index = cmd.pkey_index;
+ attr->alt_pkey_index = cmd.alt_pkey_index;
attr->en_sqd_async_notify = cmd.en_sqd_async_notify;
attr->max_rd_atomic = cmd.max_rd_atomic;
attr->max_dest_rd_atomic = cmd.max_dest_rd_atomic;
@@ -1094,8 +1235,8 @@ out:
}
ssize_t ib_uverbs_post_send(struct ib_uverbs_file *file,
- const char __user *buf, int in_len,
- int out_len)
+ const char __user *buf, int in_len,
+ int out_len)
{
struct ib_uverbs_post_send cmd;
struct ib_uverbs_post_send_resp resp;
@@ -1323,8 +1464,8 @@ err:
}
ssize_t ib_uverbs_post_recv(struct ib_uverbs_file *file,
- const char __user *buf, int in_len,
- int out_len)
+ const char __user *buf, int in_len,
+ int out_len)
{
struct ib_uverbs_post_recv cmd;
struct ib_uverbs_post_recv_resp resp;
@@ -1374,8 +1515,8 @@ out:
}
ssize_t ib_uverbs_post_srq_recv(struct ib_uverbs_file *file,
- const char __user *buf, int in_len,
- int out_len)
+ const char __user *buf, int in_len,
+ int out_len)
{
struct ib_uverbs_post_srq_recv cmd;
struct ib_uverbs_post_srq_recv_resp resp;
@@ -1723,6 +1864,8 @@ retry:
goto err_destroy;
resp.srq_handle = uobj->uobject.id;
+ resp.max_wr = attr.attr.max_wr;
+ resp.max_sge = attr.attr.max_sge;
if (copy_to_user((void __user *) (unsigned long) cmd.response,
&resp, sizeof resp)) {
@@ -1783,6 +1926,49 @@ out:
return ret ? ret : in_len;
}
+ssize_t ib_uverbs_query_srq(struct ib_uverbs_file *file,
+ const char __user *buf,
+ int in_len, int out_len)
+{
+ struct ib_uverbs_query_srq cmd;
+ struct ib_uverbs_query_srq_resp resp;
+ struct ib_srq_attr attr;
+ struct ib_srq *srq;
+ int ret;
+
+ if (out_len < sizeof resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, buf, sizeof cmd))
+ return -EFAULT;
+
+ mutex_lock(&ib_uverbs_idr_mutex);
+
+ srq = idr_find(&ib_uverbs_srq_idr, cmd.srq_handle);
+ if (srq && srq->uobject->context == file->ucontext)
+ ret = ib_query_srq(srq, &attr);
+ else
+ ret = -EINVAL;
+
+ mutex_unlock(&ib_uverbs_idr_mutex);
+
+ if (ret)
+ goto out;
+
+ memset(&resp, 0, sizeof resp);
+
+ resp.max_wr = attr.max_wr;
+ resp.max_sge = attr.max_sge;
+ resp.srq_limit = attr.srq_limit;
+
+ if (copy_to_user((void __user *) (unsigned long) cmd.response,
+ &resp, sizeof resp))
+ ret = -EFAULT;
+
+out:
+ return ret ? ret : in_len;
+}
+
ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 903f85a4bc0c..ff092a0a94da 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2005 Topspin Communications. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2005 Voltaire, Inc. All rights reserved.
* Copyright (c) 2005 PathScale, Inc. All rights reserved.
@@ -91,10 +91,12 @@ static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file,
[IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr,
[IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL] = ib_uverbs_create_comp_channel,
[IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq,
+ [IB_USER_VERBS_CMD_RESIZE_CQ] = ib_uverbs_resize_cq,
[IB_USER_VERBS_CMD_POLL_CQ] = ib_uverbs_poll_cq,
[IB_USER_VERBS_CMD_REQ_NOTIFY_CQ] = ib_uverbs_req_notify_cq,
[IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq,
[IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp,
+ [IB_USER_VERBS_CMD_QUERY_QP] = ib_uverbs_query_qp,
[IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp,
[IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp,
[IB_USER_VERBS_CMD_POST_SEND] = ib_uverbs_post_send,
@@ -106,6 +108,7 @@ static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file,
[IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast,
[IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq,
[IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq,
+ [IB_USER_VERBS_CMD_QUERY_SRQ] = ib_uverbs_query_srq,
[IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq,
};
@@ -461,7 +464,6 @@ void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr)
ib_uverbs_async_handler(uobj->uverbs_file, uobj->uobject.user_handle,
event->event, &uobj->async_list,
&uobj->async_events_reported);
-
}
void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr)
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index c857361be449..cae0845f472a 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -5,7 +5,7 @@
* Copyright (c) 2004 Topspin Corporation. All rights reserved.
* Copyright (c) 2004 Voltaire Corporation. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -245,6 +245,258 @@ struct ib_qp *ib_create_qp(struct ib_pd *pd,
}
EXPORT_SYMBOL(ib_create_qp);
+static const struct {
+ int valid;
+ enum ib_qp_attr_mask req_param[IB_QPT_RAW_ETY + 1];
+ enum ib_qp_attr_mask opt_param[IB_QPT_RAW_ETY + 1];
+} qp_state_table[IB_QPS_ERR + 1][IB_QPS_ERR + 1] = {
+ [IB_QPS_RESET] = {
+ [IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 },
+ [IB_QPS_INIT] = {
+ .valid = 1,
+ .req_param = {
+ [IB_QPT_UD] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
+ [IB_QPT_RC] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
+ [IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ }
+ },
+ },
+ [IB_QPS_INIT] = {
+ [IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 },
+ [IB_QPS_INIT] = {
+ .valid = 1,
+ .opt_param = {
+ [IB_QPT_UD] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
+ [IB_QPT_RC] = (IB_QP_PKEY_INDEX |
+ IB_QP_PORT |
+ IB_QP_ACCESS_FLAGS),
+ [IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ }
+ },
+ [IB_QPS_RTR] = {
+ .valid = 1,
+ .req_param = {
+ [IB_QPT_UC] = (IB_QP_AV |
+ IB_QP_PATH_MTU |
+ IB_QP_DEST_QPN |
+ IB_QP_RQ_PSN),
+ [IB_QPT_RC] = (IB_QP_AV |
+ IB_QP_PATH_MTU |
+ IB_QP_DEST_QPN |
+ IB_QP_RQ_PSN |
+ IB_QP_MAX_DEST_RD_ATOMIC |
+ IB_QP_MIN_RNR_TIMER),
+ },
+ .opt_param = {
+ [IB_QPT_UD] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX),
+ [IB_QPT_RC] = (IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX),
+ [IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ }
+ }
+ },
+ [IB_QPS_RTR] = {
+ [IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 },
+ [IB_QPS_RTS] = {
+ .valid = 1,
+ .req_param = {
+ [IB_QPT_UD] = IB_QP_SQ_PSN,
+ [IB_QPT_UC] = IB_QP_SQ_PSN,
+ [IB_QPT_RC] = (IB_QP_TIMEOUT |
+ IB_QP_RETRY_CNT |
+ IB_QP_RNR_RETRY |
+ IB_QP_SQ_PSN |
+ IB_QP_MAX_QP_RD_ATOMIC),
+ [IB_QPT_SMI] = IB_QP_SQ_PSN,
+ [IB_QPT_GSI] = IB_QP_SQ_PSN,
+ },
+ .opt_param = {
+ [IB_QPT_UD] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_RC] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_MIN_RNR_TIMER |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_SMI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ }
+ }
+ },
+ [IB_QPS_RTS] = {
+ [IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 },
+ [IB_QPS_RTS] = {
+ .valid = 1,
+ .opt_param = {
+ [IB_QPT_UD] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_CUR_STATE |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_ALT_PATH |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_RC] = (IB_QP_CUR_STATE |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_ALT_PATH |
+ IB_QP_PATH_MIG_STATE |
+ IB_QP_MIN_RNR_TIMER),
+ [IB_QPT_SMI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ }
+ },
+ [IB_QPS_SQD] = {
+ .valid = 1,
+ .opt_param = {
+ [IB_QPT_UD] = IB_QP_EN_SQD_ASYNC_NOTIFY,
+ [IB_QPT_UC] = IB_QP_EN_SQD_ASYNC_NOTIFY,
+ [IB_QPT_RC] = IB_QP_EN_SQD_ASYNC_NOTIFY,
+ [IB_QPT_SMI] = IB_QP_EN_SQD_ASYNC_NOTIFY,
+ [IB_QPT_GSI] = IB_QP_EN_SQD_ASYNC_NOTIFY
+ }
+ },
+ },
+ [IB_QPS_SQD] = {
+ [IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 },
+ [IB_QPS_RTS] = {
+ .valid = 1,
+ .opt_param = {
+ [IB_QPT_UD] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_RC] = (IB_QP_CUR_STATE |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_MIN_RNR_TIMER |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_SMI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ }
+ },
+ [IB_QPS_SQD] = {
+ .valid = 1,
+ .opt_param = {
+ [IB_QPT_UD] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_AV |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_RC] = (IB_QP_PORT |
+ IB_QP_AV |
+ IB_QP_TIMEOUT |
+ IB_QP_RETRY_CNT |
+ IB_QP_RNR_RETRY |
+ IB_QP_MAX_QP_RD_ATOMIC |
+ IB_QP_MAX_DEST_RD_ATOMIC |
+ IB_QP_ALT_PATH |
+ IB_QP_ACCESS_FLAGS |
+ IB_QP_PKEY_INDEX |
+ IB_QP_MIN_RNR_TIMER |
+ IB_QP_PATH_MIG_STATE),
+ [IB_QPT_SMI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_PKEY_INDEX |
+ IB_QP_QKEY),
+ }
+ }
+ },
+ [IB_QPS_SQE] = {
+ [IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 },
+ [IB_QPS_RTS] = {
+ .valid = 1,
+ .opt_param = {
+ [IB_QPT_UD] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_UC] = (IB_QP_CUR_STATE |
+ IB_QP_ACCESS_FLAGS),
+ [IB_QPT_SMI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ [IB_QPT_GSI] = (IB_QP_CUR_STATE |
+ IB_QP_QKEY),
+ }
+ }
+ },
+ [IB_QPS_ERR] = {
+ [IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 }
+ }
+};
+
+int ib_modify_qp_is_ok(enum ib_qp_state cur_state, enum ib_qp_state next_state,
+ enum ib_qp_type type, enum ib_qp_attr_mask mask)
+{
+ enum ib_qp_attr_mask req_param, opt_param;
+
+ if (cur_state < 0 || cur_state > IB_QPS_ERR ||
+ next_state < 0 || next_state > IB_QPS_ERR)
+ return 0;
+
+ if (mask & IB_QP_CUR_STATE &&
+ cur_state != IB_QPS_RTR && cur_state != IB_QPS_RTS &&
+ cur_state != IB_QPS_SQD && cur_state != IB_QPS_SQE)
+ return 0;
+
+ if (!qp_state_table[cur_state][next_state].valid)
+ return 0;
+
+ req_param = qp_state_table[cur_state][next_state].req_param[type];
+ opt_param = qp_state_table[cur_state][next_state].opt_param[type];
+
+ if ((mask & req_param) != req_param)
+ return 0;
+
+ if (mask & ~(req_param | opt_param | IB_QP_STATE))
+ return 0;
+
+ return 1;
+}
+EXPORT_SYMBOL(ib_modify_qp_is_ok);
+
int ib_modify_qp(struct ib_qp *qp,
struct ib_qp_attr *qp_attr,
int qp_attr_mask)
@@ -322,11 +574,10 @@ int ib_destroy_cq(struct ib_cq *cq)
}
EXPORT_SYMBOL(ib_destroy_cq);
-int ib_resize_cq(struct ib_cq *cq,
- int cqe)
+int ib_resize_cq(struct ib_cq *cq, int cqe)
{
return cq->device->resize_cq ?
- cq->device->resize_cq(cq, cqe) : -ENOSYS;
+ cq->device->resize_cq(cq, cqe, NULL) : -ENOSYS;
}
EXPORT_SYMBOL(ib_resize_cq);
diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c
index a19e0ed03d7c..f023d3936518 100644
--- a/drivers/infiniband/hw/mthca/mthca_av.c
+++ b/drivers/infiniband/hw/mthca/mthca_av.c
@@ -147,7 +147,7 @@ int mthca_destroy_ah(struct mthca_dev *dev, struct mthca_ah *ah)
switch (ah->type) {
case MTHCA_AH_ON_HCA:
mthca_free(&dev->av_table.alloc,
- (ah->avdma - dev->av_table.ddr_av_base) /
+ (ah->avdma - dev->av_table.ddr_av_base) /
MTHCA_AV_SIZE);
break;
@@ -193,6 +193,37 @@ int mthca_read_ah(struct mthca_dev *dev, struct mthca_ah *ah,
return 0;
}
+int mthca_ah_query(struct ib_ah *ibah, struct ib_ah_attr *attr)
+{
+ struct mthca_ah *ah = to_mah(ibah);
+ struct mthca_dev *dev = to_mdev(ibah->device);
+
+ /* Only implement for MAD and memfree ah for now. */
+ if (ah->type == MTHCA_AH_ON_HCA)
+ return -ENOSYS;
+
+ memset(attr, 0, sizeof *attr);
+ attr->dlid = be16_to_cpu(ah->av->dlid);
+ attr->sl = be32_to_cpu(ah->av->sl_tclass_flowlabel) >> 28;
+ attr->static_rate = ah->av->msg_sr & 0x7;
+ attr->src_path_bits = ah->av->g_slid & 0x7F;
+ attr->port_num = be32_to_cpu(ah->av->port_pd) >> 24;
+ attr->ah_flags = mthca_ah_grh_present(ah) ? IB_AH_GRH : 0;
+
+ if (attr->ah_flags) {
+ attr->grh.traffic_class =
+ be32_to_cpu(ah->av->sl_tclass_flowlabel) >> 20;
+ attr->grh.flow_label =
+ be32_to_cpu(ah->av->sl_tclass_flowlabel) & 0xfffff;
+ attr->grh.hop_limit = ah->av->hop_limit;
+ attr->grh.sgid_index = ah->av->gid_index &
+ (dev->limits.gid_table_len - 1);
+ memcpy(attr->grh.dgid.raw, ah->av->dgid, 16);
+ }
+
+ return 0;
+}
+
int __devinit mthca_init_av_table(struct mthca_dev *dev)
{
int err;
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 2825615ce81c..343eca507870 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -182,25 +182,58 @@ struct mthca_cmd_context {
u8 status;
};
+static int fw_cmd_doorbell = 1;
+module_param(fw_cmd_doorbell, int, 0644);
+MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
+ "(and supported by FW)");
+
static inline int go_bit(struct mthca_dev *dev)
{
return readl(dev->hcr + HCR_STATUS_OFFSET) &
swab32(1 << HCR_GO_BIT);
}
-static int mthca_cmd_post(struct mthca_dev *dev,
- u64 in_param,
- u64 out_param,
- u32 in_modifier,
- u8 op_modifier,
- u16 op,
- u16 token,
- int event)
+static void mthca_cmd_post_dbell(struct mthca_dev *dev,
+ u64 in_param,
+ u64 out_param,
+ u32 in_modifier,
+ u8 op_modifier,
+ u16 op,
+ u16 token)
{
- int err = 0;
+ void __iomem *ptr = dev->cmd.dbell_map;
+ u16 *offs = dev->cmd.dbell_offsets;
- mutex_lock(&dev->cmd.hcr_mutex);
+ __raw_writel((__force u32) cpu_to_be32(in_param >> 32), ptr + offs[0]);
+ wmb();
+ __raw_writel((__force u32) cpu_to_be32(in_param & 0xfffffffful), ptr + offs[1]);
+ wmb();
+ __raw_writel((__force u32) cpu_to_be32(in_modifier), ptr + offs[2]);
+ wmb();
+ __raw_writel((__force u32) cpu_to_be32(out_param >> 32), ptr + offs[3]);
+ wmb();
+ __raw_writel((__force u32) cpu_to_be32(out_param & 0xfffffffful), ptr + offs[4]);
+ wmb();
+ __raw_writel((__force u32) cpu_to_be32(token << 16), ptr + offs[5]);
+ wmb();
+ __raw_writel((__force u32) cpu_to_be32((1 << HCR_GO_BIT) |
+ (1 << HCA_E_BIT) |
+ (op_modifier << HCR_OPMOD_SHIFT) |
+ op), ptr + offs[6]);
+ wmb();
+ __raw_writel((__force u32) 0, ptr + offs[7]);
+ wmb();
+}
+static int mthca_cmd_post_hcr(struct mthca_dev *dev,
+ u64 in_param,
+ u64 out_param,
+ u32 in_modifier,
+ u8 op_modifier,
+ u16 op,
+ u16 token,
+ int event)
+{
if (event) {
unsigned long end = jiffies + GO_BIT_TIMEOUT;
@@ -210,10 +243,8 @@ static int mthca_cmd_post(struct mthca_dev *dev,
}
}
- if (go_bit(dev)) {
- err = -EAGAIN;
- goto out;
- }
+ if (go_bit(dev))
+ return -EAGAIN;
/*
* We use writel (instead of something like memcpy_toio)
@@ -236,7 +267,29 @@ static int mthca_cmd_post(struct mthca_dev *dev,
(op_modifier << HCR_OPMOD_SHIFT) |
op), dev->hcr + 6 * 4);
-out:
+ return 0;
+}
+
+static int mthca_cmd_post(struct mthca_dev *dev,
+ u64 in_param,
+ u64 out_param,
+ u32 in_modifier,
+ u8 op_modifier,
+ u16 op,
+ u16 token,
+ int event)
+{
+ int err = 0;
+
+ mutex_lock(&dev->cmd.hcr_mutex);
+
+ if (event && dev->cmd.flags & MTHCA_CMD_POST_DOORBELLS && fw_cmd_doorbell)
+ mthca_cmd_post_dbell(dev, in_param, out_param, in_modifier,
+ op_modifier, op, token);
+ else
+ err = mthca_cmd_post_hcr(dev, in_param, out_param, in_modifier,
+ op_modifier, op, token, event);
+
mutex_unlock(&dev->cmd.hcr_mutex);
return err;
}
@@ -275,7 +328,7 @@ static int mthca_cmd_poll(struct mthca_dev *dev,
}
if (out_is_imm)
- *out_param =
+ *out_param =
(u64) be32_to_cpu((__force __be32)
__raw_readl(dev->hcr + HCR_OUT_PARAM_OFFSET)) << 32 |
(u64) be32_to_cpu((__force __be32)
@@ -386,7 +439,7 @@ static int mthca_cmd_box(struct mthca_dev *dev,
unsigned long timeout,
u8 *status)
{
- if (dev->cmd.use_events)
+ if (dev->cmd.flags & MTHCA_CMD_USE_EVENTS)
return mthca_cmd_wait(dev, in_param, &out_param, 0,
in_modifier, op_modifier, op,
timeout, status);
@@ -423,7 +476,7 @@ static int mthca_cmd_imm(struct mthca_dev *dev,
unsigned long timeout,
u8 *status)
{
- if (dev->cmd.use_events)
+ if (dev->cmd.flags & MTHCA_CMD_USE_EVENTS)
return mthca_cmd_wait(dev, in_param, out_param, 1,
in_modifier, op_modifier, op,
timeout, status);
@@ -437,7 +490,7 @@ int mthca_cmd_init(struct mthca_dev *dev)
{
mutex_init(&dev->cmd.hcr_mutex);
sema_init(&dev->cmd.poll_sem, 1);
- dev->cmd.use_events = 0;
+ dev->cmd.flags = 0;
dev->hcr = ioremap(pci_resource_start(dev->pdev, 0) + MTHCA_HCR_BASE,
MTHCA_HCR_SIZE);
@@ -461,6 +514,8 @@ void mthca_cmd_cleanup(struct mthca_dev *dev)
{
pci_pool_destroy(dev->cmd.pool);
iounmap(dev->hcr);
+ if (dev->cmd.flags & MTHCA_CMD_POST_DOORBELLS)
+ iounmap(dev->cmd.dbell_map);
}
/*
@@ -498,7 +553,8 @@ int mthca_cmd_use_events(struct mthca_dev *dev)
; /* nothing */
--dev->cmd.token_mask;
- dev->cmd.use_events = 1;
+ dev->cmd.flags |= MTHCA_CMD_USE_EVENTS;
+
down(&dev->cmd.poll_sem);
return 0;
@@ -511,7 +567,7 @@ void mthca_cmd_use_polling(struct mthca_dev *dev)
{
int i;
- dev->cmd.use_events = 0;
+ dev->cmd.flags &= ~MTHCA_CMD_USE_EVENTS;
for (i = 0; i < dev->cmd.max_cmds; ++i)
down(&dev->cmd.event_sem);
@@ -596,8 +652,9 @@ static int mthca_map_cmd(struct mthca_dev *dev, u16 op, struct mthca_icm *icm,
* address or size and use that as our log2 size.
*/
lg = ffs(mthca_icm_addr(&iter) | mthca_icm_size(&iter)) - 1;
- if (lg < 12) {
- mthca_warn(dev, "Got FW area not aligned to 4K (%llx/%lx).\n",
+ if (lg < MTHCA_ICM_PAGE_SHIFT) {
+ mthca_warn(dev, "Got FW area not aligned to %d (%llx/%lx).\n",
+ MTHCA_ICM_PAGE_SIZE,
(unsigned long long) mthca_icm_addr(&iter),
mthca_icm_size(&iter));
err = -EINVAL;
@@ -609,8 +666,9 @@ static int mthca_map_cmd(struct mthca_dev *dev, u16 op, struct mthca_icm *icm,
virt += 1 << lg;
}
- pages[nent * 2 + 1] = cpu_to_be64((mthca_icm_addr(&iter) +
- (i << lg)) | (lg - 12));
+ pages[nent * 2 + 1] =
+ cpu_to_be64((mthca_icm_addr(&iter) + (i << lg)) |
+ (lg - MTHCA_ICM_PAGE_SHIFT));
ts += 1 << (lg - 10);
++tc;
@@ -661,12 +719,41 @@ int mthca_RUN_FW(struct mthca_dev *dev, u8 *status)
return mthca_cmd(dev, 0, 0, 0, CMD_RUN_FW, CMD_TIME_CLASS_A, status);
}
+static void mthca_setup_cmd_doorbells(struct mthca_dev *dev, u64 base)
+{
+ unsigned long addr;
+ u16 max_off = 0;
+ int i;
+
+ for (i = 0; i < 8; ++i)
+ max_off = max(max_off, dev->cmd.dbell_offsets[i]);
+
+ if ((base & PAGE_MASK) != ((base + max_off) & PAGE_MASK)) {
+ mthca_warn(dev, "Firmware doorbell region at 0x%016llx, "
+ "length 0x%x crosses a page boundary\n",
+ (unsigned long long) base, max_off);
+ return;
+ }
+
+ addr = pci_resource_start(dev->pdev, 2) +
+ ((pci_resource_len(dev->pdev, 2) - 1) & base);
+ dev->cmd.dbell_map = ioremap(addr, max_off + sizeof(u32));
+ if (!dev->cmd.dbell_map)
+ return;
+
+ dev->cmd.flags |= MTHCA_CMD_POST_DOORBELLS;
+ mthca_dbg(dev, "Mapped doorbell page for posting FW commands\n");
+}
+
int mthca_QUERY_FW(struct mthca_dev *dev, u8 *status)
{
struct mthca_mailbox *mailbox;
u32 *outbox;
+ u64 base;
+ u32 tmp;
int err = 0;
u8 lg;
+ int i;
#define QUERY_FW_OUT_SIZE 0x100
#define QUERY_FW_VER_OFFSET 0x00
@@ -674,6 +761,10 @@ int mthca_QUERY_FW(struct mthca_dev *dev, u8 *status)
#define QUERY_FW_ERR_START_OFFSET 0x30
#define QUERY_FW_ERR_SIZE_OFFSET 0x38
+#define QUERY_FW_CMD_DB_EN_OFFSET 0x10
+#define QUERY_FW_CMD_DB_OFFSET 0x50
+#define QUERY_FW_CMD_DB_BASE 0x60
+
#define QUERY_FW_START_OFFSET 0x20
#define QUERY_FW_END_OFFSET 0x28
@@ -702,16 +793,29 @@ int mthca_QUERY_FW(struct mthca_dev *dev, u8 *status)
((dev->fw_ver & 0xffff0000ull) >> 16) |
((dev->fw_ver & 0x0000ffffull) << 16);
+ mthca_dbg(dev, "FW version %012llx, max commands %d\n",
+ (unsigned long long) dev->fw_ver, dev->cmd.max_cmds);
+
MTHCA_GET(lg, outbox, QUERY_FW_MAX_CMD_OFFSET);
dev->cmd.max_cmds = 1 << lg;
MTHCA_GET(dev->catas_err.addr, outbox, QUERY_FW_ERR_START_OFFSET);
MTHCA_GET(dev->catas_err.size, outbox, QUERY_FW_ERR_SIZE_OFFSET);
- mthca_dbg(dev, "FW version %012llx, max commands %d\n",
- (unsigned long long) dev->fw_ver, dev->cmd.max_cmds);
mthca_dbg(dev, "Catastrophic error buffer at 0x%llx, size 0x%x\n",
(unsigned long long) dev->catas_err.addr, dev->catas_err.size);
+ MTHCA_GET(tmp, outbox, QUERY_FW_CMD_DB_EN_OFFSET);
+ if (tmp & 0x1) {
+ mthca_dbg(dev, "FW supports commands through doorbells\n");
+
+ MTHCA_GET(base, outbox, QUERY_FW_CMD_DB_BASE);
+ for (i = 0; i < MTHCA_CMD_NUM_DBELL_DWORDS; ++i)
+ MTHCA_GET(dev->cmd.dbell_offsets[i], outbox,
+ QUERY_FW_CMD_DB_OFFSET + (i << 1));
+
+ mthca_setup_cmd_doorbells(dev, base);
+ }
+
if (mthca_is_memfree(dev)) {
MTHCA_GET(dev->fw.arbel.fw_pages, outbox, QUERY_FW_SIZE_OFFSET);
MTHCA_GET(dev->fw.arbel.clr_int_base, outbox, QUERY_FW_CLR_INT_BASE_OFFSET);
@@ -720,12 +824,12 @@ int mthca_QUERY_FW(struct mthca_dev *dev, u8 *status)
mthca_dbg(dev, "FW size %d KB\n", dev->fw.arbel.fw_pages << 2);
/*
- * Arbel page size is always 4 KB; round up number of
- * system pages needed.
+ * Round up number of system pages needed in case
+ * MTHCA_ICM_PAGE_SIZE < PAGE_SIZE.
*/
dev->fw.arbel.fw_pages =
- ALIGN(dev->fw.arbel.fw_pages, PAGE_SIZE >> 12) >>
- (PAGE_SHIFT - 12);
+ ALIGN(dev->fw.arbel.fw_pages, PAGE_SIZE / MTHCA_ICM_PAGE_SIZE) >>
+ (PAGE_SHIFT - MTHCA_ICM_PAGE_SHIFT);
mthca_dbg(dev, "Clear int @ %llx, EQ arm @ %llx, EQ set CI @ %llx\n",
(unsigned long long) dev->fw.arbel.clr_int_base,
@@ -1173,7 +1277,8 @@ int mthca_INIT_HCA(struct mthca_dev *dev,
int err;
#define INIT_HCA_IN_SIZE 0x200
-#define INIT_HCA_FLAGS_OFFSET 0x014
+#define INIT_HCA_FLAGS1_OFFSET 0x00c
+#define INIT_HCA_FLAGS2_OFFSET 0x014
#define INIT_HCA_QPC_OFFSET 0x020
#define INIT_HCA_QPC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x10)
#define INIT_HCA_LOG_QP_OFFSET (INIT_HCA_QPC_OFFSET + 0x17)
@@ -1216,15 +1321,18 @@ int mthca_INIT_HCA(struct mthca_dev *dev,
memset(inbox, 0, INIT_HCA_IN_SIZE);
+ if (dev->mthca_flags & MTHCA_FLAG_SINAI_OPT)
+ MTHCA_PUT(inbox, 0x1, INIT_HCA_FLAGS1_OFFSET);
+
#if defined(__LITTLE_ENDIAN)
- *(inbox + INIT_HCA_FLAGS_OFFSET / 4) &= ~cpu_to_be32(1 << 1);
+ *(inbox + INIT_HCA_FLAGS2_OFFSET / 4) &= ~cpu_to_be32(1 << 1);
#elif defined(__BIG_ENDIAN)
- *(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 1);
+ *(inbox + INIT_HCA_FLAGS2_OFFSET / 4) |= cpu_to_be32(1 << 1);
#else
#error Host endianness not defined
#endif
/* Check port for UD address vector: */
- *(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1);
+ *(inbox + INIT_HCA_FLAGS2_OFFSET / 4) |= cpu_to_be32(1);
/* We leave wqe_quota, responder_exu, etc as 0 (default) */
@@ -1438,11 +1546,11 @@ int mthca_SET_ICM_SIZE(struct mthca_dev *dev, u64 icm_size, u64 *aux_pages,
return ret;
/*
- * Arbel page size is always 4 KB; round up number of system
- * pages needed.
+ * Round up number of system pages needed in case
+ * MTHCA_ICM_PAGE_SIZE < PAGE_SIZE.
*/
- *aux_pages = (*aux_pages + (1 << (PAGE_SHIFT - 12)) - 1) >> (PAGE_SHIFT - 12);
- *aux_pages = ALIGN(*aux_pages, PAGE_SIZE >> 12) >> (PAGE_SHIFT - 12);
+ *aux_pages = ALIGN(*aux_pages, PAGE_SIZE / MTHCA_ICM_PAGE_SIZE) >>
+ (PAGE_SHIFT - MTHCA_ICM_PAGE_SHIFT);
return 0;
}
@@ -1514,6 +1622,37 @@ int mthca_HW2SW_CQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox,
CMD_TIME_CLASS_A, status);
}
+int mthca_RESIZE_CQ(struct mthca_dev *dev, int cq_num, u32 lkey, u8 log_size,
+ u8 *status)
+{
+ struct mthca_mailbox *mailbox;
+ __be32 *inbox;
+ int err;
+
+#define RESIZE_CQ_IN_SIZE 0x40
+#define RESIZE_CQ_LOG_SIZE_OFFSET 0x0c
+#define RESIZE_CQ_LKEY_OFFSET 0x1c
+
+ mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
+ if (IS_ERR(mailbox))
+ return PTR_ERR(mailbox);
+ inbox = mailbox->buf;
+
+ memset(inbox, 0, RESIZE_CQ_IN_SIZE);
+ /*
+ * Leave start address fields zeroed out -- mthca assumes that
+ * MRs for CQs always start at virtual address 0.
+ */
+ MTHCA_PUT(inbox, log_size, RESIZE_CQ_LOG_SIZE_OFFSET);
+ MTHCA_PUT(inbox, lkey, RESIZE_CQ_LKEY_OFFSET);
+
+ err = mthca_cmd(dev, mailbox->dma, cq_num, 1, CMD_RESIZE_CQ,
+ CMD_TIME_CLASS_B, status);
+
+ mthca_free_mailbox(dev, mailbox);
+ return err;
+}
+
int mthca_SW2HW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox,
int srq_num, u8 *status)
{
@@ -1529,37 +1668,69 @@ int mthca_HW2SW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox,
CMD_TIME_CLASS_A, status);
}
+int mthca_QUERY_SRQ(struct mthca_dev *dev, u32 num,
+ struct mthca_mailbox *mailbox, u8 *status)
+{
+ return mthca_cmd_box(dev, 0, mailbox->dma, num, 0,
+ CMD_QUERY_SRQ, CMD_TIME_CLASS_A, status);
+}
+
int mthca_ARM_SRQ(struct mthca_dev *dev, int srq_num, int limit, u8 *status)
{
return mthca_cmd(dev, limit, srq_num, 0, CMD_ARM_SRQ,
CMD_TIME_CLASS_B, status);
}
-int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num,
- int is_ee, struct mthca_mailbox *mailbox, u32 optmask,
+int mthca_MODIFY_QP(struct mthca_dev *dev, enum ib_qp_state cur,
+ enum ib_qp_state next, u32 num, int is_ee,
+ struct mthca_mailbox *mailbox, u32 optmask,
u8 *status)
{
- static const u16 op[] = {
- [MTHCA_TRANS_RST2INIT] = CMD_RST2INIT_QPEE,
- [MTHCA_TRANS_INIT2INIT] = CMD_INIT2INIT_QPEE,
- [MTHCA_TRANS_INIT2RTR] = CMD_INIT2RTR_QPEE,
- [MTHCA_TRANS_RTR2RTS] = CMD_RTR2RTS_QPEE,
- [MTHCA_TRANS_RTS2RTS] = CMD_RTS2RTS_QPEE,
- [MTHCA_TRANS_SQERR2RTS] = CMD_SQERR2RTS_QPEE,
- [MTHCA_TRANS_ANY2ERR] = CMD_2ERR_QPEE,
- [MTHCA_TRANS_RTS2SQD] = CMD_RTS2SQD_QPEE,
- [MTHCA_TRANS_SQD2SQD] = CMD_SQD2SQD_QPEE,
- [MTHCA_TRANS_SQD2RTS] = CMD_SQD2RTS_QPEE,
- [MTHCA_TRANS_ANY2RST] = CMD_ERR2RST_QPEE
+ static const u16 op[IB_QPS_ERR + 1][IB_QPS_ERR + 1] = {
+ [IB_QPS_RESET] = {
+ [IB_QPS_RESET] = CMD_ERR2RST_QPEE,
+ [IB_QPS_ERR] = CMD_2ERR_QPEE,
+ [IB_QPS_INIT] = CMD_RST2INIT_QPEE,
+ },
+ [IB_QPS_INIT] = {
+ [IB_QPS_RESET] = CMD_ERR2RST_QPEE,
+ [IB_QPS_ERR] = CMD_2ERR_QPEE,
+ [IB_QPS_INIT] = CMD_INIT2INIT_QPEE,
+ [IB_QPS_RTR] = CMD_INIT2RTR_QPEE,
+ },
+ [IB_QPS_RTR] = {
+ [IB_QPS_RESET] = CMD_ERR2RST_QPEE,
+ [IB_QPS_ERR] = CMD_2ERR_QPEE,
+ [IB_QPS_RTS] = CMD_RTR2RTS_QPEE,
+ },
+ [IB_QPS_RTS] = {
+ [IB_QPS_RESET] = CMD_ERR2RST_QPEE,
+ [IB_QPS_ERR] = CMD_2ERR_QPEE,
+ [IB_QPS_RTS] = CMD_RTS2RTS_QPEE,
+ [IB_QPS_SQD] = CMD_RTS2SQD_QPEE,
+ },
+ [IB_QPS_SQD] = {
+ [IB_QPS_RESET] = CMD_ERR2RST_QPEE,
+ [IB_QPS_ERR] = CMD_2ERR_QPEE,
+ [IB_QPS_RTS] = CMD_SQD2RTS_QPEE,
+ [IB_QPS_SQD] = CMD_SQD2SQD_QPEE,
+ },
+ [IB_QPS_SQE] = {
+ [IB_QPS_RESET] = CMD_ERR2RST_QPEE,
+ [IB_QPS_ERR] = CMD_2ERR_QPEE,
+ [IB_QPS_RTS] = CMD_SQERR2RTS_QPEE,
+ },
+ [IB_QPS_ERR] = {
+ [IB_QPS_RESET] = CMD_ERR2RST_QPEE,
+ [IB_QPS_ERR] = CMD_2ERR_QPEE,
+ }
};
+
u8 op_mod = 0;
int my_mailbox = 0;
int err;
- if (trans < 0 || trans >= ARRAY_SIZE(op))
- return -EINVAL;
-
- if (trans == MTHCA_TRANS_ANY2RST) {
+ if (op[cur][next] == CMD_ERR2RST_QPEE) {
op_mod = 3; /* don't write outbox, any->reset */
/* For debugging */
@@ -1571,26 +1742,10 @@ int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num,
} else
mailbox = NULL;
}
- } else {
- if (0) {
- int i;
- mthca_dbg(dev, "Dumping QP context:\n");
- printk(" opt param mask: %08x\n", be32_to_cpup(mailbox->buf));
- for (i = 0; i < 0x100 / 4; ++i) {
- if (i % 8 == 0)
- printk(" [%02x] ", i * 4);
- printk(" %08x",
- be32_to_cpu(((__be32 *) mailbox->buf)[i + 2]));
- if ((i + 1) % 8 == 0)
- printk("\n");
- }
- }
- }
- if (trans == MTHCA_TRANS_ANY2RST) {
err = mthca_cmd_box(dev, 0, mailbox ? mailbox->dma : 0,
(!!is_ee << 24) | num, op_mod,
- op[trans], CMD_TIME_CLASS_C, status);
+ op[cur][next], CMD_TIME_CLASS_C, status);
if (0 && mailbox) {
int i;
@@ -1606,12 +1761,26 @@ int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num,
}
}
- } else
- err = mthca_cmd(dev, mailbox->dma, (!!is_ee << 24) | num,
- op_mod, op[trans], CMD_TIME_CLASS_C, status);
+ if (my_mailbox)
+ mthca_free_mailbox(dev, mailbox);
+ } else {
+ if (0) {
+ int i;
+ mthca_dbg(dev, "Dumping QP context:\n");
+ printk(" opt param mask: %08x\n", be32_to_cpup(mailbox->buf));
+ for (i = 0; i < 0x100 / 4; ++i) {
+ if (i % 8 == 0)
+ printk(" [%02x] ", i * 4);
+ printk(" %08x",
+ be32_to_cpu(((__be32 *) mailbox->buf)[i + 2]));
+ if ((i + 1) % 8 == 0)
+ printk("\n");
+ }
+ }
- if (my_mailbox)
- mthca_free_mailbox(dev, mailbox);
+ err = mthca_cmd(dev, mailbox->dma, optmask | (!!is_ee << 24) | num,
+ op_mod, op[cur][next], CMD_TIME_CLASS_C, status);
+ }
return err;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h
index 18175bec84c2..e4ec35c40dd3 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.h
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.h
@@ -1,6 +1,7 @@
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2006 Cisco Systems. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -73,9 +74,9 @@ enum {
MTHCA_CMD_STAT_REG_BOUND = 0x21,
/* HCA local attached memory not present: */
MTHCA_CMD_STAT_LAM_NOT_PRE = 0x22,
- /* Bad management packet (silently discarded): */
+ /* Bad management packet (silently discarded): */
MTHCA_CMD_STAT_BAD_PKT = 0x30,
- /* More outstanding CQEs in CQ than new CQ size: */
+ /* More outstanding CQEs in CQ than new CQ size: */
MTHCA_CMD_STAT_BAD_SIZE = 0x40
};
@@ -298,13 +299,18 @@ int mthca_SW2HW_CQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox,
int cq_num, u8 *status);
int mthca_HW2SW_CQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox,
int cq_num, u8 *status);
+int mthca_RESIZE_CQ(struct mthca_dev *dev, int cq_num, u32 lkey, u8 log_size,
+ u8 *status);
int mthca_SW2HW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox,
int srq_num, u8 *status);
int mthca_HW2SW_SRQ(struct mthca_dev *dev, struct mthca_mailbox *mailbox,
int srq_num, u8 *status);
+int mthca_QUERY_SRQ(struct mthca_dev *dev, u32 num,
+ struct mthca_mailbox *mailbox, u8 *status);
int mthca_ARM_SRQ(struct mthca_dev *dev, int srq_num, int limit, u8 *status);
-int mthca_MODIFY_QP(struct mthca_dev *dev, int trans, u32 num,
- int is_ee, struct mthca_mailbox *mailbox, u32 optmask,
+int mthca_MODIFY_QP(struct mthca_dev *dev, enum ib_qp_state cur,
+ enum ib_qp_state next, u32 num, int is_ee,
+ struct mthca_mailbox *mailbox, u32 optmask,
u8 *status);
int mthca_QUERY_QP(struct mthca_dev *dev, u32 num, int is_ee,
struct mthca_mailbox *mailbox, u8 *status);
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index 96f1a86bf049..76aabc5bf371 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
- * Copyright (c) 2005 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2004 Voltaire, Inc. All rights reserved.
*
@@ -150,24 +150,29 @@ struct mthca_err_cqe {
#define MTHCA_ARBEL_CQ_DB_REQ_NOT (2 << 24)
#define MTHCA_ARBEL_CQ_DB_REQ_NOT_MULT (3 << 24)
-static inline struct mthca_cqe *get_cqe(struct mthca_cq *cq, int entry)
+static inline struct mthca_cqe *get_cqe_from_buf(struct mthca_cq_buf *buf,
+ int entry)
{
- if (cq->is_direct)
- return cq->queue.direct.buf + (entry * MTHCA_CQ_ENTRY_SIZE);
+ if (buf->is_direct)
+ return buf->queue.direct.buf + (entry * MTHCA_CQ_ENTRY_SIZE);
else
- return cq->queue.page_list[entry * MTHCA_CQ_ENTRY_SIZE / PAGE_SIZE].buf
+ return buf->queue.page_list[entry * MTHCA_CQ_ENTRY_SIZE / PAGE_SIZE].buf
+ (entry * MTHCA_CQ_ENTRY_SIZE) % PAGE_SIZE;
}
-static inline struct mthca_cqe *cqe_sw(struct mthca_cq *cq, int i)
+static inline struct mthca_cqe *get_cqe(struct mthca_cq *cq, int entry)
+{
+ return get_cqe_from_buf(&cq->buf, entry);
+}
+
+static inline struct mthca_cqe *cqe_sw(struct mthca_cqe *cqe)
{
- struct mthca_cqe *cqe = get_cqe(cq, i);
return MTHCA_CQ_ENTRY_OWNER_HW & cqe->owner ? NULL : cqe;
}
static inline struct mthca_cqe *next_cqe_sw(struct mthca_cq *cq)
{
- return cqe_sw(cq, cq->cons_index & cq->ibcq.cqe);
+ return cqe_sw(get_cqe(cq, cq->cons_index & cq->ibcq.cqe));
}
static inline void set_cqe_hw(struct mthca_cqe *cqe)
@@ -289,7 +294,7 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
* from our QP and therefore don't need to be checked.
*/
for (prod_index = cq->cons_index;
- cqe_sw(cq, prod_index & cq->ibcq.cqe);
+ cqe_sw(get_cqe(cq, prod_index & cq->ibcq.cqe));
++prod_index)
if (prod_index == cq->cons_index + cq->ibcq.cqe)
break;
@@ -324,12 +329,58 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
wake_up(&cq->wait);
}
-static int handle_error_cqe(struct mthca_dev *dev, struct mthca_cq *cq,
- struct mthca_qp *qp, int wqe_index, int is_send,
- struct mthca_err_cqe *cqe,
- struct ib_wc *entry, int *free_cqe)
+void mthca_cq_resize_copy_cqes(struct mthca_cq *cq)
+{
+ int i;
+
+ /*
+ * In Tavor mode, the hardware keeps the consumer and producer
+ * indices mod the CQ size. Since we might be making the CQ
+ * bigger, we need to deal with the case where the producer
+ * index wrapped around before the CQ was resized.
+ */
+ if (!mthca_is_memfree(to_mdev(cq->ibcq.device)) &&
+ cq->ibcq.cqe < cq->resize_buf->cqe) {
+ cq->cons_index &= cq->ibcq.cqe;
+ if (cqe_sw(get_cqe(cq, cq->ibcq.cqe)))
+ cq->cons_index -= cq->ibcq.cqe + 1;
+ }
+
+ for (i = cq->cons_index; cqe_sw(get_cqe(cq, i & cq->ibcq.cqe)); ++i)
+ memcpy(get_cqe_from_buf(&cq->resize_buf->buf,
+ i & cq->resize_buf->cqe),
+ get_cqe(cq, i & cq->ibcq.cqe), MTHCA_CQ_ENTRY_SIZE);
+}
+
+int mthca_alloc_cq_buf(struct mthca_dev *dev, struct mthca_cq_buf *buf, int nent)
+{
+ int ret;
+ int i;
+
+ ret = mthca_buf_alloc(dev, nent * MTHCA_CQ_ENTRY_SIZE,
+ MTHCA_MAX_DIRECT_CQ_SIZE,
+ &buf->queue, &buf->is_direct,
+ &dev->driver_pd, 1, &buf->mr);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < nent; ++i)
+ set_cqe_hw(get_cqe_from_buf(buf, i));
+
+ return 0;
+}
+
+void mthca_free_cq_buf(struct mthca_dev *dev, struct mthca_cq_buf *buf, int cqe)
+{
+ mthca_buf_free(dev, (cqe + 1) * MTHCA_CQ_ENTRY_SIZE, &buf->queue,
+ buf->is_direct, &buf->mr);
+}
+
+static void handle_error_cqe(struct mthca_dev *dev, struct mthca_cq *cq,
+ struct mthca_qp *qp, int wqe_index, int is_send,
+ struct mthca_err_cqe *cqe,
+ struct ib_wc *entry, int *free_cqe)
{
- int err;
int dbd;
__be32 new_wqe;
@@ -412,11 +463,9 @@ static int handle_error_cqe(struct mthca_dev *dev, struct mthca_cq *cq,
* error case, so we don't have to check the doorbell count, etc.
*/
if (mthca_is_memfree(dev))
- return 0;
+ return;
- err = mthca_free_err_wqe(dev, qp, is_send, wqe_index, &dbd, &new_wqe);
- if (err)
- return err;
+ mthca_free_err_wqe(dev, qp, is_send, wqe_index, &dbd, &new_wqe);
/*
* If we're at the end of the WQE chain, or we've used up our
@@ -424,15 +473,13 @@ static int handle_error_cqe(struct mthca_dev *dev, struct mthca_cq *cq,
* the next poll operation.
*/
if (!(new_wqe & cpu_to_be32(0x3f)) || (!cqe->db_cnt && dbd))
- return 0;
+ return;
cqe->db_cnt = cpu_to_be16(be16_to_cpu(cqe->db_cnt) - dbd);
cqe->wqe = new_wqe;
cqe->syndrome = SYNDROME_WR_FLUSH_ERR;
*free_cqe = 0;
-
- return 0;
}
static inline int mthca_poll_one(struct mthca_dev *dev,
@@ -518,9 +565,9 @@ static inline int mthca_poll_one(struct mthca_dev *dev,
}
if (is_error) {
- err = handle_error_cqe(dev, cq, *cur_qp, wqe_index, is_send,
- (struct mthca_err_cqe *) cqe,
- entry, &free_cqe);
+ handle_error_cqe(dev, cq, *cur_qp, wqe_index, is_send,
+ (struct mthca_err_cqe *) cqe,
+ entry, &free_cqe);
goto out;
}
@@ -614,11 +661,14 @@ int mthca_poll_cq(struct ib_cq *ibcq, int num_entries,
spin_lock_irqsave(&cq->lock, flags);
- for (npolled = 0; npolled < num_entries; ++npolled) {
+ npolled = 0;
+repoll:
+ while (npolled < num_entries) {
err = mthca_poll_one(dev, cq, &qp,
&freed, entry + npolled);
if (err)
break;
+ ++npolled;
}
if (freed) {
@@ -626,6 +676,42 @@ int mthca_poll_cq(struct ib_cq *ibcq, int num_entries,
update_cons_index(dev, cq, freed);
}
+ /*
+ * If a CQ resize is in progress and we discovered that the
+ * old buffer is empty, then peek in the new buffer, and if
+ * it's not empty, switch to the new buffer and continue
+ * polling there.
+ */
+ if (unlikely(err == -EAGAIN && cq->resize_buf &&
+ cq->resize_buf->state == CQ_RESIZE_READY)) {
+ /*
+ * In Tavor mode, the hardware keeps the producer
+ * index modulo the CQ size. Since we might be making
+ * the CQ bigger, we need to mask our consumer index
+ * using the size of the old CQ buffer before looking
+ * in the new CQ buffer.
+ */
+ if (!mthca_is_memfree(dev))
+ cq->cons_index &= cq->ibcq.cqe;
+
+ if (cqe_sw(get_cqe_from_buf(&cq->resize_buf->buf,
+ cq->cons_index & cq->resize_buf->cqe))) {
+ struct mthca_cq_buf tbuf;
+ int tcqe;
+
+ tbuf = cq->buf;
+ tcqe = cq->ibcq.cqe;
+ cq->buf = cq->resize_buf->buf;
+ cq->ibcq.cqe = cq->resize_buf->cqe;
+
+ cq->resize_buf->buf = tbuf;
+ cq->resize_buf->cqe = tcqe;
+ cq->resize_buf->state = CQ_RESIZE_SWAPPED;
+
+ goto repoll;
+ }
+ }
+
spin_unlock_irqrestore(&cq->lock, flags);
return err == 0 || err == -EAGAIN ? npolled : err;
@@ -684,24 +770,14 @@ int mthca_arbel_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify notify)
return 0;
}
-static void mthca_free_cq_buf(struct mthca_dev *dev, struct mthca_cq *cq)
-{
- mthca_buf_free(dev, (cq->ibcq.cqe + 1) * MTHCA_CQ_ENTRY_SIZE,
- &cq->queue, cq->is_direct, &cq->mr);
-}
-
int mthca_init_cq(struct mthca_dev *dev, int nent,
struct mthca_ucontext *ctx, u32 pdn,
struct mthca_cq *cq)
{
- int size = nent * MTHCA_CQ_ENTRY_SIZE;
struct mthca_mailbox *mailbox;
struct mthca_cq_context *cq_context;
int err = -ENOMEM;
u8 status;
- int i;
-
- might_sleep();
cq->ibcq.cqe = nent - 1;
cq->is_kernel = !ctx;
@@ -739,14 +815,9 @@ int mthca_init_cq(struct mthca_dev *dev, int nent,
cq_context = mailbox->buf;
if (cq->is_kernel) {
- err = mthca_buf_alloc(dev, size, MTHCA_MAX_DIRECT_CQ_SIZE,
- &cq->queue, &cq->is_direct,
- &dev->driver_pd, 1, &cq->mr);
+ err = mthca_alloc_cq_buf(dev, &cq->buf, nent);
if (err)
goto err_out_mailbox;
-
- for (i = 0; i < nent; ++i)
- set_cqe_hw(get_cqe(cq, i));
}
spin_lock_init(&cq->lock);
@@ -765,7 +836,7 @@ int mthca_init_cq(struct mthca_dev *dev, int nent,
cq_context->error_eqn = cpu_to_be32(dev->eq_table.eq[MTHCA_EQ_ASYNC].eqn);
cq_context->comp_eqn = cpu_to_be32(dev->eq_table.eq[MTHCA_EQ_COMP].eqn);
cq_context->pd = cpu_to_be32(pdn);
- cq_context->lkey = cpu_to_be32(cq->mr.ibmr.lkey);
+ cq_context->lkey = cpu_to_be32(cq->buf.mr.ibmr.lkey);
cq_context->cqn = cpu_to_be32(cq->cqn);
if (mthca_is_memfree(dev)) {
@@ -803,7 +874,7 @@ int mthca_init_cq(struct mthca_dev *dev, int nent,
err_out_free_mr:
if (cq->is_kernel)
- mthca_free_cq_buf(dev, cq);
+ mthca_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
err_out_mailbox:
mthca_free_mailbox(dev, mailbox);
@@ -832,8 +903,6 @@ void mthca_free_cq(struct mthca_dev *dev,
int err;
u8 status;
- might_sleep();
-
mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
if (IS_ERR(mailbox)) {
mthca_warn(dev, "No memory for mailbox to free CQ.\n");
@@ -871,7 +940,7 @@ void mthca_free_cq(struct mthca_dev *dev,
wait_event(cq->wait, !atomic_read(&cq->refcount));
if (cq->is_kernel) {
- mthca_free_cq_buf(dev, cq);
+ mthca_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
if (mthca_is_memfree(dev)) {
mthca_free_db(dev, MTHCA_DB_TYPE_CQ_ARM, cq->arm_db_index);
mthca_free_db(dev, MTHCA_DB_TYPE_CQ_SET_CI, cq->set_ci_db_index);
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index e481037288d6..ad52edbefe98 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2004 Voltaire, Inc. All rights reserved.
*
@@ -53,8 +53,8 @@
#define DRV_NAME "ib_mthca"
#define PFX DRV_NAME ": "
-#define DRV_VERSION "0.07"
-#define DRV_RELDATE "February 13, 2006"
+#define DRV_VERSION "0.08"
+#define DRV_RELDATE "February 14, 2006"
enum {
MTHCA_FLAG_DDR_HIDDEN = 1 << 1,
@@ -64,7 +64,8 @@ enum {
MTHCA_FLAG_NO_LAM = 1 << 5,
MTHCA_FLAG_FMR = 1 << 6,
MTHCA_FLAG_MEMFREE = 1 << 7,
- MTHCA_FLAG_PCIE = 1 << 8
+ MTHCA_FLAG_PCIE = 1 << 8,
+ MTHCA_FLAG_SINAI_OPT = 1 << 9
};
enum {
@@ -110,9 +111,17 @@ enum {
MTHCA_OPCODE_INVALID = 0xff
};
+enum {
+ MTHCA_CMD_USE_EVENTS = 1 << 0,
+ MTHCA_CMD_POST_DOORBELLS = 1 << 1
+};
+
+enum {
+ MTHCA_CMD_NUM_DBELL_DWORDS = 8
+};
+
struct mthca_cmd {
struct pci_pool *pool;
- int use_events;
struct mutex hcr_mutex;
struct semaphore poll_sem;
struct semaphore event_sem;
@@ -121,6 +130,9 @@ struct mthca_cmd {
int free_head;
struct mthca_cmd_context *context;
u16 token_mask;
+ u32 flags;
+ void __iomem *dbell_map;
+ u16 dbell_offsets[MTHCA_CMD_NUM_DBELL_DWORDS];
};
struct mthca_limits {
@@ -470,12 +482,16 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
enum ib_event_type event_type);
void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
struct mthca_srq *srq);
+void mthca_cq_resize_copy_cqes(struct mthca_cq *cq);
+int mthca_alloc_cq_buf(struct mthca_dev *dev, struct mthca_cq_buf *buf, int nent);
+void mthca_free_cq_buf(struct mthca_dev *dev, struct mthca_cq_buf *buf, int cqe);
int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd,
struct ib_srq_attr *attr, struct mthca_srq *srq);
void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq);
int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
enum ib_srq_attr_mask attr_mask);
+int mthca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr);
void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
enum ib_event_type event_type);
void mthca_free_srq_wqe(struct mthca_srq *srq, u32 wqe_addr);
@@ -486,6 +502,8 @@ int mthca_arbel_post_srq_recv(struct ib_srq *srq, struct ib_recv_wr *wr,
void mthca_qp_event(struct mthca_dev *dev, u32 qpn,
enum ib_event_type event_type);
+int mthca_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr, int qp_attr_mask,
+ struct ib_qp_init_attr *qp_init_attr);
int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask);
int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct ib_send_wr **bad_wr);
@@ -495,8 +513,8 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct ib_send_wr **bad_wr);
int mthca_arbel_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
struct ib_recv_wr **bad_wr);
-int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send,
- int index, int *dbd, __be32 *new_wqe);
+void mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send,
+ int index, int *dbd, __be32 *new_wqe);
int mthca_alloc_qp(struct mthca_dev *dev,
struct mthca_pd *pd,
struct mthca_cq *send_cq,
@@ -522,6 +540,7 @@ int mthca_create_ah(struct mthca_dev *dev,
int mthca_destroy_ah(struct mthca_dev *dev, struct mthca_ah *ah);
int mthca_read_ah(struct mthca_dev *dev, struct mthca_ah *ah,
struct ib_ud_header *header);
+int mthca_ah_query(struct ib_ah *ibah, struct ib_ah_attr *attr);
int mthca_ah_grh_present(struct mthca_ah *ah);
int mthca_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid);
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index 2eabb27804cd..cbdc348fb689 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -497,7 +497,7 @@ static int __devinit mthca_create_eq(struct mthca_dev *dev,
eq->dev = dev;
eq->nent = roundup_pow_of_two(max(nent, 2));
- npages = ALIGN(eq->nent * MTHCA_EQ_ENTRY_SIZE, PAGE_SIZE) / PAGE_SIZE;
+ npages = ALIGN(eq->nent * MTHCA_EQ_ENTRY_SIZE, PAGE_SIZE) / PAGE_SIZE;
eq->page_list = kmalloc(npages * sizeof *eq->page_list,
GFP_KERNEL);
@@ -825,7 +825,7 @@ void __devexit mthca_unmap_eq_icm(struct mthca_dev *dev)
{
u8 status;
- mthca_UNMAP_ICM(dev, dev->eq_table.icm_virt, PAGE_SIZE / 4096, &status);
+ mthca_UNMAP_ICM(dev, dev->eq_table.icm_virt, 1, &status);
pci_unmap_page(dev->pdev, dev->eq_table.icm_dma, PAGE_SIZE,
PCI_DMA_BIDIRECTIONAL);
__free_page(dev->eq_table.icm_page);
@@ -928,7 +928,7 @@ int __devinit mthca_init_eq_table(struct mthca_dev *dev)
mthca_warn(dev, "MAP_EQ for cmd EQ %d returned status 0x%02x\n",
dev->eq_table.eq[MTHCA_EQ_CMD].eqn, status);
- for (i = 0; i < MTHCA_EQ_CMD; ++i)
+ for (i = 0; i < MTHCA_NUM_EQ; ++i)
if (mthca_is_memfree(dev))
arbel_eq_req_not(dev, dev->eq_table.eq[i].eqn_mask);
else
diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
index 1229c604c6e0..4ace6a392f41 100644
--- a/drivers/infiniband/hw/mthca/mthca_mad.c
+++ b/drivers/infiniband/hw/mthca/mthca_mad.c
@@ -109,6 +109,19 @@ static void smp_snoop(struct ib_device *ibdev,
}
}
+static void node_desc_override(struct ib_device *dev,
+ struct ib_mad *mad)
+{
+ if ((mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_LID_ROUTED ||
+ mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) &&
+ mad->mad_hdr.method == IB_MGMT_METHOD_GET_RESP &&
+ mad->mad_hdr.attr_id == IB_SMP_ATTR_NODE_DESC) {
+ mutex_lock(&to_mdev(dev)->cap_mask_mutex);
+ memcpy(((struct ib_smp *) mad)->data, dev->node_desc, 64);
+ mutex_unlock(&to_mdev(dev)->cap_mask_mutex);
+ }
+}
+
static void forward_trap(struct mthca_dev *dev,
u8 port_num,
struct ib_mad *mad)
@@ -207,8 +220,10 @@ int mthca_process_mad(struct ib_device *ibdev,
return IB_MAD_RESULT_FAILURE;
}
- if (!out_mad->mad_hdr.status)
+ if (!out_mad->mad_hdr.status) {
smp_snoop(ibdev, port_num, in_mad);
+ node_desc_override(ibdev, out_mad);
+ }
/* set return bit in status of directed route responses */
if (in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 9c849d27b06e..266f347c6707 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -935,13 +935,19 @@ enum {
static struct {
u64 latest_fw;
- int is_memfree;
- int is_pcie;
+ u32 flags;
} mthca_hca_table[] = {
- [TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 3, 3), .is_memfree = 0, .is_pcie = 0 },
- [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 0), .is_memfree = 0, .is_pcie = 1 },
- [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 0), .is_memfree = 1, .is_pcie = 1 },
- [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 0, 1), .is_memfree = 1, .is_pcie = 1 }
+ [TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 4, 0),
+ .flags = 0 },
+ [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 400),
+ .flags = MTHCA_FLAG_PCIE },
+ [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 0),
+ .flags = MTHCA_FLAG_MEMFREE |
+ MTHCA_FLAG_PCIE },
+ [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 0, 800),
+ .flags = MTHCA_FLAG_MEMFREE |
+ MTHCA_FLAG_PCIE |
+ MTHCA_FLAG_SINAI_OPT }
};
static int __devinit mthca_init_one(struct pci_dev *pdev,
@@ -1031,12 +1037,9 @@ static int __devinit mthca_init_one(struct pci_dev *pdev,
mdev->pdev = pdev;
+ mdev->mthca_flags = mthca_hca_table[id->driver_data].flags;
if (ddr_hidden)
mdev->mthca_flags |= MTHCA_FLAG_DDR_HIDDEN;
- if (mthca_hca_table[id->driver_data].is_memfree)
- mdev->mthca_flags |= MTHCA_FLAG_MEMFREE;
- if (mthca_hca_table[id->driver_data].is_pcie)
- mdev->mthca_flags |= MTHCA_FLAG_PCIE;
/*
* Now reset the HCA before we touch the PCI capabilities or
diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c
index 321f11e707f2..9965bda9afed 100644
--- a/drivers/infiniband/hw/mthca/mthca_mcg.c
+++ b/drivers/infiniband/hw/mthca/mthca_mcg.c
@@ -187,7 +187,7 @@ int mthca_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
for (i = 0; i < MTHCA_QP_PER_MGM; ++i)
if (mgm->qp[i] == cpu_to_be32(ibqp->qp_num | (1 << 31))) {
- mthca_dbg(dev, "QP %06x already a member of MGM\n",
+ mthca_dbg(dev, "QP %06x already a member of MGM\n",
ibqp->qp_num);
err = 0;
goto out;
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index d709cb162a72..15cc2f6eb475 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -202,7 +202,8 @@ void mthca_table_put(struct mthca_dev *dev, struct mthca_icm_table *table, int o
if (--table->icm[i]->refcount == 0) {
mthca_UNMAP_ICM(dev, table->virt + i * MTHCA_TABLE_CHUNK_SIZE,
- MTHCA_TABLE_CHUNK_SIZE >> 12, &status);
+ MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE,
+ &status);
mthca_free_icm(dev, table->icm[i]);
table->icm[i] = NULL;
}
@@ -336,7 +337,8 @@ err:
for (i = 0; i < num_icm; ++i)
if (table->icm[i]) {
mthca_UNMAP_ICM(dev, virt + i * MTHCA_TABLE_CHUNK_SIZE,
- MTHCA_TABLE_CHUNK_SIZE >> 12, &status);
+ MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE,
+ &status);
mthca_free_icm(dev, table->icm[i]);
}
@@ -353,7 +355,8 @@ void mthca_free_icm_table(struct mthca_dev *dev, struct mthca_icm_table *table)
for (i = 0; i < table->num_icm; ++i)
if (table->icm[i]) {
mthca_UNMAP_ICM(dev, table->virt + i * MTHCA_TABLE_CHUNK_SIZE,
- MTHCA_TABLE_CHUNK_SIZE >> 12, &status);
+ MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE,
+ &status);
mthca_free_icm(dev, table->icm[i]);
}
@@ -364,7 +367,7 @@ static u64 mthca_uarc_virt(struct mthca_dev *dev, struct mthca_uar *uar, int pag
{
return dev->uar_table.uarc_base +
uar->index * dev->uar_table.uarc_size +
- page * 4096;
+ page * MTHCA_ICM_PAGE_SIZE;
}
int mthca_map_user_db(struct mthca_dev *dev, struct mthca_uar *uar,
@@ -401,7 +404,7 @@ int mthca_map_user_db(struct mthca_dev *dev, struct mthca_uar *uar,
if (ret < 0)
goto out;
- db_tab->page[i].mem.length = 4096;
+ db_tab->page[i].mem.length = MTHCA_ICM_PAGE_SIZE;
db_tab->page[i].mem.offset = uaddr & ~PAGE_MASK;
ret = pci_map_sg(dev->pdev, &db_tab->page[i].mem, 1, PCI_DMA_TODEVICE);
@@ -455,7 +458,7 @@ struct mthca_user_db_table *mthca_init_user_db_tab(struct mthca_dev *dev)
if (!mthca_is_memfree(dev))
return NULL;
- npages = dev->uar_table.uarc_size / 4096;
+ npages = dev->uar_table.uarc_size / MTHCA_ICM_PAGE_SIZE;
db_tab = kmalloc(sizeof *db_tab + npages * sizeof *db_tab->page, GFP_KERNEL);
if (!db_tab)
return ERR_PTR(-ENOMEM);
@@ -478,7 +481,7 @@ void mthca_cleanup_user_db_tab(struct mthca_dev *dev, struct mthca_uar *uar,
if (!mthca_is_memfree(dev))
return;
- for (i = 0; i < dev->uar_table.uarc_size / 4096; ++i) {
+ for (i = 0; i < dev->uar_table.uarc_size / MTHCA_ICM_PAGE_SIZE; ++i) {
if (db_tab->page[i].uvirt) {
mthca_UNMAP_ICM(dev, mthca_uarc_virt(dev, uar, i), 1, &status);
pci_unmap_sg(dev->pdev, &db_tab->page[i].mem, 1, PCI_DMA_TODEVICE);
@@ -551,20 +554,20 @@ int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type,
page = dev->db_tab->page + end;
alloc:
- page->db_rec = dma_alloc_coherent(&dev->pdev->dev, 4096,
+ page->db_rec = dma_alloc_coherent(&dev->pdev->dev, MTHCA_ICM_PAGE_SIZE,
&page->mapping, GFP_KERNEL);
if (!page->db_rec) {
ret = -ENOMEM;
goto out;
}
- memset(page->db_rec, 0, 4096);
+ memset(page->db_rec, 0, MTHCA_ICM_PAGE_SIZE);
ret = mthca_MAP_ICM_page(dev, page->mapping,
mthca_uarc_virt(dev, &dev->driver_uar, i), &status);
if (!ret && status)
ret = -EINVAL;
if (ret) {
- dma_free_coherent(&dev->pdev->dev, 4096,
+ dma_free_coherent(&dev->pdev->dev, MTHCA_ICM_PAGE_SIZE,
page->db_rec, page->mapping);
goto out;
}
@@ -612,7 +615,7 @@ void mthca_free_db(struct mthca_dev *dev, int type, int db_index)
i >= dev->db_tab->max_group1 - 1) {
mthca_UNMAP_ICM(dev, mthca_uarc_virt(dev, &dev->driver_uar, i), 1, &status);
- dma_free_coherent(&dev->pdev->dev, 4096,
+ dma_free_coherent(&dev->pdev->dev, MTHCA_ICM_PAGE_SIZE,
page->db_rec, page->mapping);
page->db_rec = NULL;
@@ -640,7 +643,7 @@ int mthca_init_db_tab(struct mthca_dev *dev)
mutex_init(&dev->db_tab->mutex);
- dev->db_tab->npages = dev->uar_table.uarc_size / 4096;
+ dev->db_tab->npages = dev->uar_table.uarc_size / MTHCA_ICM_PAGE_SIZE;
dev->db_tab->max_group1 = 0;
dev->db_tab->min_group2 = dev->db_tab->npages - 1;
@@ -681,7 +684,7 @@ void mthca_cleanup_db_tab(struct mthca_dev *dev)
mthca_UNMAP_ICM(dev, mthca_uarc_virt(dev, &dev->driver_uar, i), 1, &status);
- dma_free_coherent(&dev->pdev->dev, 4096,
+ dma_free_coherent(&dev->pdev->dev, MTHCA_ICM_PAGE_SIZE,
dev->db_tab->page[i].db_rec,
dev->db_tab->page[i].mapping);
}
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h
index 36f1141a08aa..6d42947e1dc4 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.h
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.h
@@ -45,6 +45,12 @@
((256 - sizeof (struct list_head) - 2 * sizeof (int)) / \
(sizeof (struct scatterlist)))
+enum {
+ MTHCA_ICM_PAGE_SHIFT = 12,
+ MTHCA_ICM_PAGE_SIZE = 1 << MTHCA_ICM_PAGE_SHIFT,
+ MTHCA_DB_REC_PER_PAGE = MTHCA_ICM_PAGE_SIZE / 8
+};
+
struct mthca_icm_chunk {
struct list_head list;
int npages;
@@ -131,10 +137,6 @@ static inline unsigned long mthca_icm_size(struct mthca_icm_iter *iter)
return sg_dma_len(&iter->chunk->mem[iter->page_idx]);
}
-enum {
- MTHCA_DB_REC_PER_PAGE = 4096 / 8
-};
-
struct mthca_db_page {
DECLARE_BITMAP(used, MTHCA_DB_REC_PER_PAGE);
__be64 *db_rec;
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index e995e2aa016d..698b62125765 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -76,6 +76,8 @@ struct mthca_mpt_entry {
#define MTHCA_MPT_STATUS_SW 0xF0
#define MTHCA_MPT_STATUS_HW 0x00
+#define SINAI_FMR_KEY_INC 0x1000000
+
/*
* Buddy allocator for MTT segments (currently not very efficient
* since it doesn't keep a free list and just searches linearly
@@ -330,6 +332,14 @@ static inline u32 key_to_hw_index(struct mthca_dev *dev, u32 key)
return tavor_key_to_hw_index(key);
}
+static inline u32 adjust_key(struct mthca_dev *dev, u32 key)
+{
+ if (dev->mthca_flags & MTHCA_FLAG_SINAI_OPT)
+ return ((key << 20) & 0x800000) | (key & 0x7fffff);
+ else
+ return key;
+}
+
int mthca_mr_alloc(struct mthca_dev *dev, u32 pd, int buffer_size_shift,
u64 iova, u64 total_size, u32 access, struct mthca_mr *mr)
{
@@ -340,13 +350,12 @@ int mthca_mr_alloc(struct mthca_dev *dev, u32 pd, int buffer_size_shift,
int err;
u8 status;
- might_sleep();
-
WARN_ON(buffer_size_shift >= 32);
key = mthca_alloc(&dev->mr_table.mpt_alloc);
if (key == -1)
return -ENOMEM;
+ key = adjust_key(dev, key);
mr->ibmr.rkey = mr->ibmr.lkey = hw_index_to_key(dev, key);
if (mthca_is_memfree(dev)) {
@@ -467,8 +476,6 @@ void mthca_free_mr(struct mthca_dev *dev, struct mthca_mr *mr)
int err;
u8 status;
- might_sleep();
-
err = mthca_HW2SW_MPT(dev, NULL,
key_to_hw_index(dev, mr->ibmr.lkey) &
(dev->limits.num_mpts - 1),
@@ -495,9 +502,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd,
int err = -ENOMEM;
int i;
- might_sleep();
-
- if (mr->attr.page_size < 12 || mr->attr.page_size >= 32)
+ if (mr->attr.page_shift < 12 || mr->attr.page_shift >= 32)
return -EINVAL;
/* For Arbel, all MTTs must fit in the same page. */
@@ -510,6 +515,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd,
key = mthca_alloc(&dev->mr_table.mpt_alloc);
if (key == -1)
return -ENOMEM;
+ key = adjust_key(dev, key);
idx = key & (dev->limits.num_mpts - 1);
mr->ibmr.rkey = mr->ibmr.lkey = hw_index_to_key(dev, key);
@@ -523,7 +529,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd,
BUG_ON(!mr->mem.arbel.mpt);
} else
mr->mem.tavor.mpt = dev->mr_table.tavor_fmr.mpt_base +
- sizeof *(mr->mem.tavor.mpt) * idx;
+ sizeof *(mr->mem.tavor.mpt) * idx;
mr->mtt = __mthca_alloc_mtt(dev, list_len, dev->mr_table.fmr_mtt_buddy);
if (IS_ERR(mr->mtt))
@@ -549,7 +555,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd,
MTHCA_MPT_FLAG_REGION |
access);
- mpt_entry->page_size = cpu_to_be32(mr->attr.page_size - 12);
+ mpt_entry->page_size = cpu_to_be32(mr->attr.page_shift - 12);
mpt_entry->key = cpu_to_be32(key);
mpt_entry->pd = cpu_to_be32(pd);
memset(&mpt_entry->start, 0,
@@ -617,7 +623,7 @@ static inline int mthca_check_fmr(struct mthca_fmr *fmr, u64 *page_list,
if (list_len > fmr->attr.max_pages)
return -EINVAL;
- page_mask = (1 << fmr->attr.page_size) - 1;
+ page_mask = (1 << fmr->attr.page_shift) - 1;
/* We are getting page lists, so va must be page aligned. */
if (iova & page_mask)
@@ -665,7 +671,7 @@ int mthca_tavor_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list,
}
mpt_entry.lkey = cpu_to_be32(key);
- mpt_entry.length = cpu_to_be64(list_len * (1ull << fmr->attr.page_size));
+ mpt_entry.length = cpu_to_be64(list_len * (1ull << fmr->attr.page_shift));
mpt_entry.start = cpu_to_be64(iova);
__raw_writel((__force u32) mpt_entry.lkey, &fmr->mem.tavor.mpt->key);
@@ -693,7 +699,10 @@ int mthca_arbel_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list,
++fmr->maps;
key = arbel_key_to_hw_index(fmr->ibmr.lkey);
- key += dev->limits.num_mpts;
+ if (dev->mthca_flags & MTHCA_FLAG_SINAI_OPT)
+ key += SINAI_FMR_KEY_INC;
+ else
+ key += dev->limits.num_mpts;
fmr->ibmr.lkey = fmr->ibmr.rkey = arbel_hw_index_to_key(key);
*(u8 *) fmr->mem.arbel.mpt = MTHCA_MPT_STATUS_SW;
@@ -706,7 +715,7 @@ int mthca_arbel_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list,
fmr->mem.arbel.mpt->key = cpu_to_be32(key);
fmr->mem.arbel.mpt->lkey = cpu_to_be32(key);
- fmr->mem.arbel.mpt->length = cpu_to_be64(list_len * (1ull << fmr->attr.page_size));
+ fmr->mem.arbel.mpt->length = cpu_to_be64(list_len * (1ull << fmr->attr.page_shift));
fmr->mem.arbel.mpt->start = cpu_to_be64(iova);
wmb();
@@ -766,6 +775,9 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
else
dev->mthca_flags |= MTHCA_FLAG_FMR;
+ if (dev->mthca_flags & MTHCA_FLAG_SINAI_OPT)
+ mthca_dbg(dev, "Memory key throughput optimization activated.\n");
+
err = mthca_buddy_init(&dev->mr_table.mtt_buddy,
fls(dev->limits.num_mtt_segs - 1));
@@ -785,7 +797,7 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
}
dev->mr_table.tavor_fmr.mpt_base =
- ioremap(dev->mr_table.mpt_base,
+ ioremap(dev->mr_table.mpt_base,
(1 << i) * sizeof (struct mthca_mpt_entry));
if (!dev->mr_table.tavor_fmr.mpt_base) {
@@ -813,7 +825,7 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
goto err_reserve_fmr;
dev->mr_table.fmr_mtt_buddy =
- &dev->mr_table.tavor_fmr.mtt_buddy;
+ &dev->mr_table.tavor_fmr.mtt_buddy;
} else
dev->mr_table.fmr_mtt_buddy = &dev->mr_table.mtt_buddy;
diff --git a/drivers/infiniband/hw/mthca/mthca_pd.c b/drivers/infiniband/hw/mthca/mthca_pd.c
index 3dbf06a6e6f4..105fc5faaddf 100644
--- a/drivers/infiniband/hw/mthca/mthca_pd.c
+++ b/drivers/infiniband/hw/mthca/mthca_pd.c
@@ -43,8 +43,6 @@ int mthca_pd_alloc(struct mthca_dev *dev, int privileged, struct mthca_pd *pd)
{
int err = 0;
- might_sleep();
-
pd->privileged = privileged;
atomic_set(&pd->sqp_count, 0);
@@ -66,7 +64,6 @@ int mthca_pd_alloc(struct mthca_dev *dev, int privileged, struct mthca_pd *pd)
void mthca_pd_free(struct mthca_dev *dev, struct mthca_pd *pd)
{
- might_sleep();
if (pd->privileged)
mthca_free_mr(dev, &pd->ntmr);
mthca_free(&dev->pd_table.alloc, pd->pd_num);
diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c
index 08a909371b0a..58d44aa3c302 100644
--- a/drivers/infiniband/hw/mthca/mthca_profile.c
+++ b/drivers/infiniband/hw/mthca/mthca_profile.c
@@ -152,7 +152,7 @@ u64 mthca_make_profile(struct mthca_dev *dev,
}
if (total_size > mem_avail) {
mthca_err(dev, "Profile requires 0x%llx bytes; "
- "won't in 0x%llx bytes of context memory.\n",
+ "won't fit in 0x%llx bytes of context memory.\n",
(unsigned long long) total_size,
(unsigned long long) mem_avail);
kfree(profile);
@@ -262,6 +262,14 @@ u64 mthca_make_profile(struct mthca_dev *dev,
*/
dev->limits.num_pds = MTHCA_NUM_PDS;
+ if (dev->mthca_flags & MTHCA_FLAG_SINAI_OPT &&
+ init_hca->log_mpt_sz > 23) {
+ mthca_warn(dev, "MPT table too large (requested size 2^%d >= 2^24)\n",
+ init_hca->log_mpt_sz);
+ mthca_warn(dev, "Disabling memory key throughput optimization.\n");
+ dev->mthca_flags &= ~MTHCA_FLAG_SINAI_OPT;
+ }
+
/*
* For Tavor, FMRs use ioremapped PCI memory. For 32 bit
* systems it may use too much vmalloc space to map all MTT
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index e88e39aef85a..2c250bc11c33 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
* Copyright (c) 2004 Voltaire, Inc. All rights reserved.
*
@@ -108,12 +108,12 @@ static int mthca_query_device(struct ib_device *ibdev,
props->max_srq_wr = mdev->limits.max_srq_wqes;
props->max_srq_sge = mdev->limits.max_sg;
props->local_ca_ack_delay = mdev->limits.local_ca_ack_delay;
- props->atomic_cap = mdev->limits.flags & DEV_LIM_FLAG_ATOMIC ?
+ props->atomic_cap = mdev->limits.flags & DEV_LIM_FLAG_ATOMIC ?
IB_ATOMIC_HCA : IB_ATOMIC_NONE;
props->max_pkeys = mdev->limits.pkey_table_len;
props->max_mcast_grp = mdev->limits.num_mgms + mdev->limits.num_amgms;
props->max_mcast_qp_attach = MTHCA_QP_PER_MGM;
- props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
+ props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
props->max_mcast_grp;
err = 0;
@@ -176,6 +176,23 @@ static int mthca_query_port(struct ib_device *ibdev,
return err;
}
+static int mthca_modify_device(struct ib_device *ibdev,
+ int mask,
+ struct ib_device_modify *props)
+{
+ if (mask & ~IB_DEVICE_MODIFY_NODE_DESC)
+ return -EOPNOTSUPP;
+
+ if (mask & IB_DEVICE_MODIFY_NODE_DESC) {
+ if (mutex_lock_interruptible(&to_mdev(ibdev)->cap_mask_mutex))
+ return -ERESTARTSYS;
+ memcpy(ibdev->node_desc, props->node_desc, 64);
+ mutex_unlock(&to_mdev(ibdev)->cap_mask_mutex);
+ }
+
+ return 0;
+}
+
static int mthca_modify_port(struct ib_device *ibdev,
u8 port, int port_modify_mask,
struct ib_port_modify *props)
@@ -669,9 +686,9 @@ static struct ib_cq *mthca_create_cq(struct ib_device *ibdev, int entries,
}
if (context) {
- cq->mr.ibmr.lkey = ucmd.lkey;
- cq->set_ci_db_index = ucmd.set_db_index;
- cq->arm_db_index = ucmd.arm_db_index;
+ cq->buf.mr.ibmr.lkey = ucmd.lkey;
+ cq->set_ci_db_index = ucmd.set_db_index;
+ cq->arm_db_index = ucmd.arm_db_index;
}
for (nent = 1; nent <= entries; nent <<= 1)
@@ -689,6 +706,8 @@ static struct ib_cq *mthca_create_cq(struct ib_device *ibdev, int entries,
goto err_free;
}
+ cq->resize_buf = NULL;
+
return &cq->ibcq;
err_free:
@@ -707,6 +726,121 @@ err_unmap_set:
return ERR_PTR(err);
}
+static int mthca_alloc_resize_buf(struct mthca_dev *dev, struct mthca_cq *cq,
+ int entries)
+{
+ int ret;
+
+ spin_lock_irq(&cq->lock);
+ if (cq->resize_buf) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ cq->resize_buf = kmalloc(sizeof *cq->resize_buf, GFP_ATOMIC);
+ if (!cq->resize_buf) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ cq->resize_buf->state = CQ_RESIZE_ALLOC;
+
+ ret = 0;
+
+unlock:
+ spin_unlock_irq(&cq->lock);
+
+ if (ret)
+ return ret;
+
+ ret = mthca_alloc_cq_buf(dev, &cq->resize_buf->buf, entries);
+ if (ret) {
+ spin_lock_irq(&cq->lock);
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+ spin_unlock_irq(&cq->lock);
+ return ret;
+ }
+
+ cq->resize_buf->cqe = entries - 1;
+
+ spin_lock_irq(&cq->lock);
+ cq->resize_buf->state = CQ_RESIZE_READY;
+ spin_unlock_irq(&cq->lock);
+
+ return 0;
+}
+
+static int mthca_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
+{
+ struct mthca_dev *dev = to_mdev(ibcq->device);
+ struct mthca_cq *cq = to_mcq(ibcq);
+ struct mthca_resize_cq ucmd;
+ u32 lkey;
+ u8 status;
+ int ret;
+
+ if (entries < 1 || entries > dev->limits.max_cqes)
+ return -EINVAL;
+
+ entries = roundup_pow_of_two(entries + 1);
+ if (entries == ibcq->cqe + 1)
+ return 0;
+
+ if (cq->is_kernel) {
+ ret = mthca_alloc_resize_buf(dev, cq, entries);
+ if (ret)
+ return ret;
+ lkey = cq->resize_buf->buf.mr.ibmr.lkey;
+ } else {
+ if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd))
+ return -EFAULT;
+ lkey = ucmd.lkey;
+ }
+
+ ret = mthca_RESIZE_CQ(dev, cq->cqn, lkey, long_log2(entries), &status);
+ if (status)
+ ret = -EINVAL;
+
+ if (ret) {
+ if (cq->resize_buf) {
+ mthca_free_cq_buf(dev, &cq->resize_buf->buf,
+ cq->resize_buf->cqe);
+ kfree(cq->resize_buf);
+ spin_lock_irq(&cq->lock);
+ cq->resize_buf = NULL;
+ spin_unlock_irq(&cq->lock);
+ }
+ return ret;
+ }
+
+ if (cq->is_kernel) {
+ struct mthca_cq_buf tbuf;
+ int tcqe;
+
+ spin_lock_irq(&cq->lock);
+ if (cq->resize_buf->state == CQ_RESIZE_READY) {
+ mthca_cq_resize_copy_cqes(cq);
+ tbuf = cq->buf;
+ tcqe = cq->ibcq.cqe;
+ cq->buf = cq->resize_buf->buf;
+ cq->ibcq.cqe = cq->resize_buf->cqe;
+ } else {
+ tbuf = cq->resize_buf->buf;
+ tcqe = cq->resize_buf->cqe;
+ }
+
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+ spin_unlock_irq(&cq->lock);
+
+ mthca_free_cq_buf(dev, &tbuf, tcqe);
+ } else
+ ibcq->cqe = entries - 1;
+
+ return 0;
+}
+
static int mthca_destroy_cq(struct ib_cq *cq)
{
if (cq->uobject) {
@@ -1070,6 +1204,20 @@ static int mthca_init_node_data(struct mthca_dev *dev)
goto out;
init_query_mad(in_mad);
+ in_mad->attr_id = IB_SMP_ATTR_NODE_DESC;
+
+ err = mthca_MAD_IFC(dev, 1, 1,
+ 1, NULL, NULL, in_mad, out_mad,
+ &status);
+ if (err)
+ goto out;
+ if (status) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ memcpy(dev->ib_dev.node_desc, out_mad->data, 64);
+
in_mad->attr_id = IB_SMP_ATTR_NODE_INFO;
err = mthca_MAD_IFC(dev, 1, 1,
@@ -1113,14 +1261,17 @@ int mthca_register_device(struct mthca_dev *dev)
(1ull << IB_USER_VERBS_CMD_DEREG_MR) |
(1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
(1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
+ (1ull << IB_USER_VERBS_CMD_RESIZE_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_QP) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_QP) |
(1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
(1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
(1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) |
(1ull << IB_USER_VERBS_CMD_DETACH_MCAST) |
(1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
(1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_SRQ);
dev->ib_dev.node_type = IB_NODE_CA;
dev->ib_dev.phys_port_cnt = dev->limits.num_ports;
@@ -1128,6 +1279,7 @@ int mthca_register_device(struct mthca_dev *dev)
dev->ib_dev.class_dev.dev = &dev->pdev->dev;
dev->ib_dev.query_device = mthca_query_device;
dev->ib_dev.query_port = mthca_query_port;
+ dev->ib_dev.modify_device = mthca_modify_device;
dev->ib_dev.modify_port = mthca_modify_port;
dev->ib_dev.query_pkey = mthca_query_pkey;
dev->ib_dev.query_gid = mthca_query_gid;
@@ -1137,11 +1289,13 @@ int mthca_register_device(struct mthca_dev *dev)
dev->ib_dev.alloc_pd = mthca_alloc_pd;
dev->ib_dev.dealloc_pd = mthca_dealloc_pd;
dev->ib_dev.create_ah = mthca_ah_create;
+ dev->ib_dev.query_ah = mthca_ah_query;
dev->ib_dev.destroy_ah = mthca_ah_destroy;
if (dev->mthca_flags & MTHCA_FLAG_SRQ) {
dev->ib_dev.create_srq = mthca_create_srq;
- dev->ib_dev.modify_srq = mthca_modify_srq;
+ dev->ib_dev.modify_srq = mthca_modify_srq;
+ dev->ib_dev.query_srq = mthca_query_srq;
dev->ib_dev.destroy_srq = mthca_destroy_srq;
if (mthca_is_memfree(dev))
@@ -1152,8 +1306,10 @@ int mthca_register_device(struct mthca_dev *dev)
dev->ib_dev.create_qp = mthca_create_qp;
dev->ib_dev.modify_qp = mthca_modify_qp;
+ dev->ib_dev.query_qp = mthca_query_qp;
dev->ib_dev.destroy_qp = mthca_destroy_qp;
dev->ib_dev.create_cq = mthca_create_cq;
+ dev->ib_dev.resize_cq = mthca_resize_cq;
dev->ib_dev.destroy_cq = mthca_destroy_cq;
dev->ib_dev.poll_cq = mthca_poll_cq;
dev->ib_dev.get_dma_mr = mthca_get_dma_mr;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h
index 1e73947b4702..2e7f52136965 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.h
+++ b/drivers/infiniband/hw/mthca/mthca_provider.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2004 Topspin Communications. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -164,9 +164,11 @@ struct mthca_ah {
* - wait_event until ref count is zero
*
* It is the consumer's responsibilty to make sure that no QP
- * operations (WQE posting or state modification) are pending when the
+ * operations (WQE posting or state modification) are pending when a
* QP is destroyed. Also, the consumer must make sure that calls to
- * qp_modify are serialized.
+ * qp_modify are serialized. Similarly, the consumer is responsible
+ * for ensuring that no CQ resize operations are pending when a CQ
+ * is destroyed.
*
* Possible optimizations (wait for profile data to see if/where we
* have locks bouncing between CPUs):
@@ -176,25 +178,40 @@ struct mthca_ah {
* send queue and one for the receive queue)
*/
+struct mthca_cq_buf {
+ union mthca_buf queue;
+ struct mthca_mr mr;
+ int is_direct;
+};
+
+struct mthca_cq_resize {
+ struct mthca_cq_buf buf;
+ int cqe;
+ enum {
+ CQ_RESIZE_ALLOC,
+ CQ_RESIZE_READY,
+ CQ_RESIZE_SWAPPED
+ } state;
+};
+
struct mthca_cq {
- struct ib_cq ibcq;
- spinlock_t lock;
- atomic_t refcount;
- int cqn;
- u32 cons_index;
- int is_direct;
- int is_kernel;
+ struct ib_cq ibcq;
+ spinlock_t lock;
+ atomic_t refcount;
+ int cqn;
+ u32 cons_index;
+ struct mthca_cq_buf buf;
+ struct mthca_cq_resize *resize_buf;
+ int is_kernel;
/* Next fields are Arbel only */
- int set_ci_db_index;
- __be32 *set_ci_db;
- int arm_db_index;
- __be32 *arm_db;
- int arm_sn;
+ int set_ci_db_index;
+ __be32 *set_ci_db;
+ int arm_db_index;
+ __be32 *arm_db;
+ int arm_sn;
- union mthca_buf queue;
- struct mthca_mr mr;
- wait_queue_head_t wait;
+ wait_queue_head_t wait;
};
struct mthca_srq {
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index fba608ed7df2..f673c461e30b 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -2,7 +2,7 @@
* Copyright (c) 2004 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Cisco Systems. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
- * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
+ * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -286,207 +286,6 @@ static int to_mthca_st(int transport)
}
}
-static const struct {
- int trans;
- u32 req_param[NUM_TRANS];
- u32 opt_param[NUM_TRANS];
-} state_table[IB_QPS_ERR + 1][IB_QPS_ERR + 1] = {
- [IB_QPS_RESET] = {
- [IB_QPS_RESET] = { .trans = MTHCA_TRANS_ANY2RST },
- [IB_QPS_ERR] = { .trans = MTHCA_TRANS_ANY2ERR },
- [IB_QPS_INIT] = {
- .trans = MTHCA_TRANS_RST2INIT,
- .req_param = {
- [UD] = (IB_QP_PKEY_INDEX |
- IB_QP_PORT |
- IB_QP_QKEY),
- [UC] = (IB_QP_PKEY_INDEX |
- IB_QP_PORT |
- IB_QP_ACCESS_FLAGS),
- [RC] = (IB_QP_PKEY_INDEX |
- IB_QP_PORT |
- IB_QP_ACCESS_FLAGS),
- [MLX] = (IB_QP_PKEY_INDEX |
- IB_QP_QKEY),
- },
- /* bug-for-bug compatibility with VAPI: */
- .opt_param = {
- [MLX] = IB_QP_PORT
- }
- },
- },
- [IB_QPS_INIT] = {
- [IB_QPS_RESET] = { .trans = MTHCA_TRANS_ANY2RST },
- [IB_QPS_ERR] = { .trans = MTHCA_TRANS_ANY2ERR },
- [IB_QPS_INIT] = {
- .trans = MTHCA_TRANS_INIT2INIT,
- .opt_param = {
- [UD] = (IB_QP_PKEY_INDEX |
- IB_QP_PORT |
- IB_QP_QKEY),
- [UC] = (IB_QP_PKEY_INDEX |
- IB_QP_PORT |
- IB_QP_ACCESS_FLAGS),
- [RC] = (IB_QP_PKEY_INDEX |
- IB_QP_PORT |
- IB_QP_ACCESS_FLAGS),
- [MLX] = (IB_QP_PKEY_INDEX |
- IB_QP_QKEY),
- }
- },
- [IB_QPS_RTR] = {
- .trans = MTHCA_TRANS_INIT2RTR,
- .req_param = {
- [UC] = (IB_QP_AV |
- IB_QP_PATH_MTU |
- IB_QP_DEST_QPN |
- IB_QP_RQ_PSN),
- [RC] = (IB_QP_AV |
- IB_QP_PATH_MTU |
- IB_QP_DEST_QPN |
- IB_QP_RQ_PSN |
- IB_QP_MAX_DEST_RD_ATOMIC |
- IB_QP_MIN_RNR_TIMER),
- },
- .opt_param = {
- [UD] = (IB_QP_PKEY_INDEX |
- IB_QP_QKEY),
- [UC] = (IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_PKEY_INDEX),
- [RC] = (IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_PKEY_INDEX),
- [MLX] = (IB_QP_PKEY_INDEX |
- IB_QP_QKEY),
- }
- }
- },
- [IB_QPS_RTR] = {
- [IB_QPS_RESET] = { .trans = MTHCA_TRANS_ANY2RST },
- [IB_QPS_ERR] = { .trans = MTHCA_TRANS_ANY2ERR },
- [IB_QPS_RTS] = {
- .trans = MTHCA_TRANS_RTR2RTS,
- .req_param = {
- [UD] = IB_QP_SQ_PSN,
- [UC] = IB_QP_SQ_PSN,
- [RC] = (IB_QP_TIMEOUT |
- IB_QP_RETRY_CNT |
- IB_QP_RNR_RETRY |
- IB_QP_SQ_PSN |
- IB_QP_MAX_QP_RD_ATOMIC),
- [MLX] = IB_QP_SQ_PSN,
- },
- .opt_param = {
- [UD] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- [UC] = (IB_QP_CUR_STATE |
- IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_PATH_MIG_STATE),
- [RC] = (IB_QP_CUR_STATE |
- IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_MIN_RNR_TIMER |
- IB_QP_PATH_MIG_STATE),
- [MLX] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- }
- }
- },
- [IB_QPS_RTS] = {
- [IB_QPS_RESET] = { .trans = MTHCA_TRANS_ANY2RST },
- [IB_QPS_ERR] = { .trans = MTHCA_TRANS_ANY2ERR },
- [IB_QPS_RTS] = {
- .trans = MTHCA_TRANS_RTS2RTS,
- .opt_param = {
- [UD] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- [UC] = (IB_QP_ACCESS_FLAGS |
- IB_QP_ALT_PATH |
- IB_QP_PATH_MIG_STATE),
- [RC] = (IB_QP_ACCESS_FLAGS |
- IB_QP_ALT_PATH |
- IB_QP_PATH_MIG_STATE |
- IB_QP_MIN_RNR_TIMER),
- [MLX] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- }
- },
- [IB_QPS_SQD] = {
- .trans = MTHCA_TRANS_RTS2SQD,
- },
- },
- [IB_QPS_SQD] = {
- [IB_QPS_RESET] = { .trans = MTHCA_TRANS_ANY2RST },
- [IB_QPS_ERR] = { .trans = MTHCA_TRANS_ANY2ERR },
- [IB_QPS_RTS] = {
- .trans = MTHCA_TRANS_SQD2RTS,
- .opt_param = {
- [UD] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- [UC] = (IB_QP_CUR_STATE |
- IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_PATH_MIG_STATE),
- [RC] = (IB_QP_CUR_STATE |
- IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_MIN_RNR_TIMER |
- IB_QP_PATH_MIG_STATE),
- [MLX] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- }
- },
- [IB_QPS_SQD] = {
- .trans = MTHCA_TRANS_SQD2SQD,
- .opt_param = {
- [UD] = (IB_QP_PKEY_INDEX |
- IB_QP_QKEY),
- [UC] = (IB_QP_AV |
- IB_QP_CUR_STATE |
- IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_PKEY_INDEX |
- IB_QP_PATH_MIG_STATE),
- [RC] = (IB_QP_AV |
- IB_QP_TIMEOUT |
- IB_QP_RETRY_CNT |
- IB_QP_RNR_RETRY |
- IB_QP_MAX_QP_RD_ATOMIC |
- IB_QP_MAX_DEST_RD_ATOMIC |
- IB_QP_CUR_STATE |
- IB_QP_ALT_PATH |
- IB_QP_ACCESS_FLAGS |
- IB_QP_PKEY_INDEX |
- IB_QP_MIN_RNR_TIMER |
- IB_QP_PATH_MIG_STATE),
- [MLX] = (IB_QP_PKEY_INDEX |
- IB_QP_QKEY),
- }
- }
- },
- [IB_QPS_SQE] = {
- [IB_QPS_RESET] = { .trans = MTHCA_TRANS_ANY2RST },
- [IB_QPS_ERR] = { .trans = MTHCA_TRANS_ANY2ERR },
- [IB_QPS_RTS] = {
- .trans = MTHCA_TRANS_SQERR2RTS,
- .opt_param = {
- [UD] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- [UC] = (IB_QP_CUR_STATE |
- IB_QP_ACCESS_FLAGS),
- [MLX] = (IB_QP_CUR_STATE |
- IB_QP_QKEY),
- }
- }
- },
- [IB_QPS_ERR] = {
- [IB_QPS_RESET] = { .trans = MTHCA_TRANS_ANY2RST },
- [IB_QPS_ERR] = { .trans = MTHCA_TRANS_ANY2ERR }
- }
-};
-
static void store_attrs(struct mthca_sqp *sqp, struct ib_qp_attr *attr,
int attr_mask)
{
@@ -549,6 +348,141 @@ static __be32 get_hw_access_flags(struct mthca_qp *qp, struct ib_qp_attr *attr,
return cpu_to_be32(hw_access_flags);
}
+static inline enum ib_qp_state to_ib_qp_state(int mthca_state)
+{
+ switch (mthca_state) {
+ case MTHCA_QP_STATE_RST: return IB_QPS_RESET;
+ case MTHCA_QP_STATE_INIT: return IB_QPS_INIT;
+ case MTHCA_QP_STATE_RTR: return IB_QPS_RTR;
+ case MTHCA_QP_STATE_RTS: return IB_QPS_RTS;
+ case MTHCA_QP_STATE_DRAINING:
+ case MTHCA_QP_STATE_SQD: return IB_QPS_SQD;
+ case MTHCA_QP_STATE_SQE: return IB_QPS_SQE;
+ case MTHCA_QP_STATE_ERR: return IB_QPS_ERR;
+ default: return -1;
+ }
+}
+
+static inline enum ib_mig_state to_ib_mig_state(int mthca_mig_state)
+{
+ switch (mthca_mig_state) {
+ case 0: return IB_MIG_ARMED;
+ case 1: return IB_MIG_REARM;
+ case 3: return IB_MIG_MIGRATED;
+ default: return -1;
+ }
+}
+
+static int to_ib_qp_access_flags(int mthca_flags)
+{
+ int ib_flags = 0;
+
+ if (mthca_flags & MTHCA_QP_BIT_RRE)
+ ib_flags |= IB_ACCESS_REMOTE_READ;
+ if (mthca_flags & MTHCA_QP_BIT_RWE)
+ ib_flags |= IB_ACCESS_REMOTE_WRITE;
+ if (mthca_flags & MTHCA_QP_BIT_RAE)
+ ib_flags |= IB_ACCESS_REMOTE_ATOMIC;
+
+ return ib_flags;
+}
+
+static void to_ib_ah_attr(struct mthca_dev *dev, struct ib_ah_attr *ib_ah_attr,
+ struct mthca_qp_path *path)
+{
+ memset(ib_ah_attr, 0, sizeof *path);
+ ib_ah_attr->port_num = (be32_to_cpu(path->port_pkey) >> 24) & 0x3;
+ ib_ah_attr->dlid = be16_to_cpu(path->rlid);
+ ib_ah_attr->sl = be32_to_cpu(path->sl_tclass_flowlabel) >> 28;
+ ib_ah_attr->src_path_bits = path->g_mylmc & 0x7f;
+ ib_ah_attr->static_rate = path->static_rate & 0x7;
+ ib_ah_attr->ah_flags = (path->g_mylmc & (1 << 7)) ? IB_AH_GRH : 0;
+ if (ib_ah_attr->ah_flags) {
+ ib_ah_attr->grh.sgid_index = path->mgid_index & (dev->limits.gid_table_len - 1);
+ ib_ah_attr->grh.hop_limit = path->hop_limit;
+ ib_ah_attr->grh.traffic_class =
+ (be32_to_cpu(path->sl_tclass_flowlabel) >> 20) & 0xff;
+ ib_ah_attr->grh.flow_label =
+ be32_to_cpu(path->sl_tclass_flowlabel) & 0xfffff;
+ memcpy(ib_ah_attr->grh.dgid.raw,
+ path->rgid, sizeof ib_ah_attr->grh.dgid.raw);
+ }
+}
+
+int mthca_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr, int qp_attr_mask,
+ struct ib_qp_init_attr *qp_init_attr)
+{
+ struct mthca_dev *dev = to_mdev(ibqp->device);
+ struct mthca_qp *qp = to_mqp(ibqp);
+ int err;
+ struct mthca_mailbox *mailbox;
+ struct mthca_qp_param *qp_param;
+ struct mthca_qp_context *context;
+ int mthca_state;
+ u8 status;
+
+ mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
+ if (IS_ERR(mailbox))
+ return PTR_ERR(mailbox);
+
+ err = mthca_QUERY_QP(dev, qp->qpn, 0, mailbox, &status);
+ if (err)
+ goto out;
+ if (status) {
+ mthca_warn(dev, "QUERY_QP returned status %02x\n", status);
+ err = -EINVAL;
+ goto out;
+ }
+
+ qp_param = mailbox->buf;
+ context = &qp_param->context;
+ mthca_state = be32_to_cpu(context->flags) >> 28;
+
+ qp_attr->qp_state = to_ib_qp_state(mthca_state);
+ qp_attr->cur_qp_state = qp_attr->qp_state;
+ qp_attr->path_mtu = context->mtu_msgmax >> 5;
+ qp_attr->path_mig_state =
+ to_ib_mig_state((be32_to_cpu(context->flags) >> 11) & 0x3);
+ qp_attr->qkey = be32_to_cpu(context->qkey);
+ qp_attr->rq_psn = be32_to_cpu(context->rnr_nextrecvpsn) & 0xffffff;
+ qp_attr->sq_psn = be32_to_cpu(context->next_send_psn) & 0xffffff;
+ qp_attr->dest_qp_num = be32_to_cpu(context->remote_qpn) & 0xffffff;
+ qp_attr->qp_access_flags =
+ to_ib_qp_access_flags(be32_to_cpu(context->params2));
+ qp_attr->cap.max_send_wr = qp->sq.max;
+ qp_attr->cap.max_recv_wr = qp->rq.max;
+ qp_attr->cap.max_send_sge = qp->sq.max_gs;
+ qp_attr->cap.max_recv_sge = qp->rq.max_gs;
+ qp_attr->cap.max_inline_data = qp->max_inline_data;
+
+ to_ib_ah_attr(dev, &qp_attr->ah_attr, &context->pri_path);
+ to_ib_ah_attr(dev, &qp_attr->alt_ah_attr, &context->alt_path);
+
+ qp_attr->pkey_index = be32_to_cpu(context->pri_path.port_pkey) & 0x7f;
+ qp_attr->alt_pkey_index = be32_to_cpu(context->alt_path.port_pkey) & 0x7f;
+
+ /* qp_attr->en_sqd_async_notify is only applicable in modify qp */
+ qp_attr->sq_draining = mthca_state == MTHCA_QP_STATE_DRAINING;
+
+ qp_attr->max_rd_atomic = 1 << ((be32_to_cpu(context->params1) >> 21) & 0x7);
+
+ qp_attr->max_dest_rd_atomic =
+ 1 << ((be32_to_cpu(context->params2) >> 21) & 0x7);
+ qp_attr->min_rnr_timer =
+ (be32_to_cpu(context->rnr_nextrecvpsn) >> 24) & 0x1f;
+ qp_attr->port_num = qp_attr->ah_attr.port_num;
+ qp_attr->timeout = context->pri_path.ackto >> 3;
+ qp_attr->retry_cnt = (be32_to_cpu(context->params1) >> 16) & 0x7;
+ qp_attr->rnr_retry = context->pri_path.rnr_retry >> 5;
+ qp_attr->alt_port_num = qp_attr->alt_ah_attr.port_num;
+ qp_attr->alt_timeout = context->alt_path.ackto >> 3;
+ qp_init_attr->cap = qp_attr->cap;
+
+out:
+ mthca_free_mailbox(dev, mailbox);
+ return err;
+}
+
static void mthca_path_set(struct ib_ah_attr *ah, struct mthca_qp_path *path)
{
path->g_mylmc = ah->src_path_bits & 0x7f;
@@ -559,9 +493,9 @@ static void mthca_path_set(struct ib_ah_attr *ah, struct mthca_qp_path *path)
path->g_mylmc |= 1 << 7;
path->mgid_index = ah->grh.sgid_index;
path->hop_limit = ah->grh.hop_limit;
- path->sl_tclass_flowlabel =
+ path->sl_tclass_flowlabel =
cpu_to_be32((ah->sl << 28) |
- (ah->grh.traffic_class << 20) |
+ (ah->grh.traffic_class << 20) |
(ah->grh.flow_label));
memcpy(path->rgid, ah->grh.dgid.raw, 16);
} else
@@ -576,18 +510,12 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
struct mthca_mailbox *mailbox;
struct mthca_qp_param *qp_param;
struct mthca_qp_context *qp_context;
- u32 req_param, opt_param;
+ u32 sqd_event = 0;
u8 status;
int err;
if (attr_mask & IB_QP_CUR_STATE) {
- if (attr->cur_qp_state != IB_QPS_RTR &&
- attr->cur_qp_state != IB_QPS_RTS &&
- attr->cur_qp_state != IB_QPS_SQD &&
- attr->cur_qp_state != IB_QPS_SQE)
- return -EINVAL;
- else
- cur_state = attr->cur_qp_state;
+ cur_state = attr->cur_qp_state;
} else {
spin_lock_irq(&qp->sq.lock);
spin_lock(&qp->rq.lock);
@@ -596,44 +524,20 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
spin_unlock_irq(&qp->sq.lock);
}
- if (attr_mask & IB_QP_STATE) {
- if (attr->qp_state < 0 || attr->qp_state > IB_QPS_ERR)
- return -EINVAL;
- new_state = attr->qp_state;
- } else
- new_state = cur_state;
+ new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state;
- if (state_table[cur_state][new_state].trans == MTHCA_TRANS_INVALID) {
- mthca_dbg(dev, "Illegal QP transition "
- "%d->%d\n", cur_state, new_state);
+ if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type, attr_mask)) {
+ mthca_dbg(dev, "Bad QP transition (transport %d) "
+ "%d->%d with attr 0x%08x\n",
+ qp->transport, cur_state, new_state,
+ attr_mask);
return -EINVAL;
}
- req_param = state_table[cur_state][new_state].req_param[qp->transport];
- opt_param = state_table[cur_state][new_state].opt_param[qp->transport];
-
- if ((req_param & attr_mask) != req_param) {
- mthca_dbg(dev, "QP transition "
- "%d->%d missing req attr 0x%08x\n",
- cur_state, new_state,
- req_param & ~attr_mask);
- return -EINVAL;
- }
-
- if (attr_mask & ~(req_param | opt_param | IB_QP_STATE)) {
- mthca_dbg(dev, "QP transition (transport %d) "
- "%d->%d has extra attr 0x%08x\n",
- qp->transport,
- cur_state, new_state,
- attr_mask & ~(req_param | opt_param |
- IB_QP_STATE));
- return -EINVAL;
- }
-
- if ((attr_mask & IB_QP_PKEY_INDEX) &&
+ if ((attr_mask & IB_QP_PKEY_INDEX) &&
attr->pkey_index >= dev->limits.pkey_table_len) {
- mthca_dbg(dev, "PKey index (%u) too large. max is %d\n",
- attr->pkey_index,dev->limits.pkey_table_len-1);
+ mthca_dbg(dev, "P_Key index (%u) too large. max is %d\n",
+ attr->pkey_index, dev->limits.pkey_table_len-1);
return -EINVAL;
}
@@ -733,7 +637,7 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
if (attr_mask & IB_QP_RNR_RETRY) {
qp_context->alt_path.rnr_retry = qp_context->pri_path.rnr_retry =
attr->rnr_retry << 5;
- qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RNR_RETRY |
+ qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RNR_RETRY |
MTHCA_QP_OPTPAR_ALT_RNR_RETRY);
}
@@ -748,14 +652,20 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
}
if (attr_mask & IB_QP_ALT_PATH) {
+ if (attr->alt_pkey_index >= dev->limits.pkey_table_len) {
+ mthca_dbg(dev, "Alternate P_Key index (%u) too large. max is %d\n",
+ attr->alt_pkey_index, dev->limits.pkey_table_len-1);
+ return -EINVAL;
+ }
+
if (attr->alt_port_num == 0 || attr->alt_port_num > dev->limits.num_ports) {
- mthca_dbg(dev, "Alternate port number (%u) is invalid\n",
+ mthca_dbg(dev, "Alternate port number (%u) is invalid\n",
attr->alt_port_num);
return -EINVAL;
}
mthca_path_set(&attr->alt_ah_attr, &qp_context->alt_path);
- qp_context->alt_path.port_pkey |= cpu_to_be32(attr->alt_pkey_index |
+ qp_context->alt_path.port_pkey |= cpu_to_be32(attr->alt_pkey_index |
attr->alt_port_num << 24);
qp_context->alt_path.ackto = attr->alt_timeout << 3;
qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_ALT_ADDR_PATH);
@@ -841,11 +751,16 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
qp_context->srqn = cpu_to_be32(1 << 24 |
to_msrq(ibqp->srq)->srqn);
- err = mthca_MODIFY_QP(dev, state_table[cur_state][new_state].trans,
- qp->qpn, 0, mailbox, 0, &status);
+ if (cur_state == IB_QPS_RTS && new_state == IB_QPS_SQD &&
+ attr_mask & IB_QP_EN_SQD_ASYNC_NOTIFY &&
+ attr->en_sqd_async_notify)
+ sqd_event = 1 << 31;
+
+ err = mthca_MODIFY_QP(dev, cur_state, new_state, qp->qpn, 0,
+ mailbox, sqd_event, &status);
if (status) {
- mthca_warn(dev, "modify QP %d returned status %02x.\n",
- state_table[cur_state][new_state].trans, status);
+ mthca_warn(dev, "modify QP %d->%d returned status %02x.\n",
+ cur_state, new_state, status);
err = -EINVAL;
}
@@ -1078,10 +993,10 @@ static int mthca_map_memfree(struct mthca_dev *dev,
if (ret)
goto err_qpc;
- ret = mthca_table_get(dev, dev->qp_table.rdb_table,
- qp->qpn << dev->qp_table.rdb_shift);
- if (ret)
- goto err_eqpc;
+ ret = mthca_table_get(dev, dev->qp_table.rdb_table,
+ qp->qpn << dev->qp_table.rdb_shift);
+ if (ret)
+ goto err_eqpc;
}
@@ -1393,7 +1308,8 @@ void mthca_free_qp(struct mthca_dev *dev,
wait_event(qp->wait, !atomic_read(&qp->refcount));
if (qp->state != IB_QPS_RESET)
- mthca_MODIFY_QP(dev, MTHCA_TRANS_ANY2RST, qp->qpn, 0, NULL, 0, &status);
+ mthca_MODIFY_QP(dev, qp->state, IB_QPS_RESET, qp->qpn, 0,
+ NULL, 0, &status);
/*
* If this is a userspace QP, the buffers, MR, CQs and so on
@@ -1699,7 +1615,9 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
mthca_opcode[wr->opcode]);
wmb();
((struct mthca_next_seg *) prev_wqe)->ee_nds =
- cpu_to_be32((size0 ? 0 : MTHCA_NEXT_DBD) | size);
+ cpu_to_be32((size0 ? 0 : MTHCA_NEXT_DBD) | size |
+ ((wr->send_flags & IB_SEND_FENCE) ?
+ MTHCA_NEXT_FENCE : 0));
if (!size0) {
size0 = size;
@@ -2061,7 +1979,9 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
mthca_opcode[wr->opcode]);
wmb();
((struct mthca_next_seg *) prev_wqe)->ee_nds =
- cpu_to_be32(MTHCA_NEXT_DBD | size);
+ cpu_to_be32(MTHCA_NEXT_DBD | size |
+ ((wr->send_flags & IB_SEND_FENCE) ?
+ MTHCA_NEXT_FENCE : 0));
if (!size0) {
size0 = size;
@@ -2115,7 +2035,7 @@ int mthca_arbel_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
int i;
void *wqe;
- spin_lock_irqsave(&qp->rq.lock, flags);
+ spin_lock_irqsave(&qp->rq.lock, flags);
/* XXX check that state is OK to post receive */
@@ -2182,8 +2102,8 @@ out:
return err;
}
-int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send,
- int index, int *dbd, __be32 *new_wqe)
+void mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send,
+ int index, int *dbd, __be32 *new_wqe)
{
struct mthca_next_seg *next;
@@ -2193,7 +2113,7 @@ int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send,
*/
if (qp->ibqp.srq) {
*new_wqe = 0;
- return 0;
+ return;
}
if (is_send)
@@ -2207,8 +2127,6 @@ int mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send,
(next->ee_nds & cpu_to_be32(0x3f));
else
*new_wqe = 0;
-
- return 0;
}
int __devinit mthca_init_qp_table(struct mthca_dev *dev)
diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c
index e7e153d9c4c6..47a6a754a591 100644
--- a/drivers/infiniband/hw/mthca/mthca_srq.c
+++ b/drivers/infiniband/hw/mthca/mthca_srq.c
@@ -49,7 +49,8 @@ struct mthca_tavor_srq_context {
__be32 state_pd;
__be32 lkey;
__be32 uar;
- __be32 wqe_cnt;
+ __be16 limit_watermark;
+ __be16 wqe_cnt;
u32 reserved[2];
};
@@ -271,6 +272,9 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd,
srq->first_free = 0;
srq->last_free = srq->max - 1;
+ attr->max_wr = (mthca_is_memfree(dev)) ? srq->max - 1 : srq->max;
+ attr->max_sge = srq->max_gs;
+
return 0;
err_out_free_srq:
@@ -339,7 +343,7 @@ void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq)
int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
enum ib_srq_attr_mask attr_mask)
-{
+{
struct mthca_dev *dev = to_mdev(ibsrq->device);
struct mthca_srq *srq = to_msrq(ibsrq);
int ret;
@@ -360,6 +364,41 @@ int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
return 0;
}
+int mthca_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *srq_attr)
+{
+ struct mthca_dev *dev = to_mdev(ibsrq->device);
+ struct mthca_srq *srq = to_msrq(ibsrq);
+ struct mthca_mailbox *mailbox;
+ struct mthca_arbel_srq_context *arbel_ctx;
+ struct mthca_tavor_srq_context *tavor_ctx;
+ u8 status;
+ int err;
+
+ mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
+ if (IS_ERR(mailbox))
+ return PTR_ERR(mailbox);
+
+ err = mthca_QUERY_SRQ(dev, srq->srqn, mailbox, &status);
+ if (err)
+ goto out;
+
+ if (mthca_is_memfree(dev)) {
+ arbel_ctx = mailbox->buf;
+ srq_attr->srq_limit = be16_to_cpu(arbel_ctx->limit_watermark);
+ } else {
+ tavor_ctx = mailbox->buf;
+ srq_attr->srq_limit = be16_to_cpu(tavor_ctx->limit_watermark);
+ }
+
+ srq_attr->max_wr = (mthca_is_memfree(dev)) ? srq->max - 1 : srq->max;
+ srq_attr->max_sge = srq->max_gs;
+
+out:
+ mthca_free_mailbox(dev, mailbox);
+
+ return err;
+}
+
void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
enum ib_event_type event_type)
{
diff --git a/drivers/infiniband/hw/mthca/mthca_user.h b/drivers/infiniband/hw/mthca/mthca_user.h
index bb015c6494c4..02cc0a766f3a 100644
--- a/drivers/infiniband/hw/mthca/mthca_user.h
+++ b/drivers/infiniband/hw/mthca/mthca_user.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2005 Topspin Communications. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -75,6 +75,11 @@ struct mthca_create_cq_resp {
__u32 reserved;
};
+struct mthca_resize_cq {
+ __u32 lkey;
+ __u32 reserved;
+};
+
struct mthca_create_srq {
__u32 lkey;
__u32 db_index;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 2f85a9a831b1..1251f86ec856 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -217,10 +217,16 @@ struct ipoib_neigh {
struct list_head list;
};
+/*
+ * We stash a pointer to our private neighbour information after our
+ * hardware address in neigh->ha. The ALIGN() expression here makes
+ * sure that this pointer is stored aligned so that an unaligned
+ * load is not needed to dereference it.
+ */
static inline struct ipoib_neigh **to_ipoib_neigh(struct neighbour *neigh)
{
- return (struct ipoib_neigh **) (neigh->ha + 24 -
- (offsetof(struct neighbour, ha) & 4));
+ return (void*) neigh + ALIGN(offsetof(struct neighbour, ha) +
+ INFINIBAND_ALEN, sizeof(void *));
}
extern struct workqueue_struct *ipoib_workqueue;
@@ -253,7 +259,7 @@ void ipoib_ib_dev_cleanup(struct net_device *dev);
int ipoib_ib_dev_open(struct net_device *dev);
int ipoib_ib_dev_up(struct net_device *dev);
-int ipoib_ib_dev_down(struct net_device *dev);
+int ipoib_ib_dev_down(struct net_device *dev, int flush);
int ipoib_ib_dev_stop(struct net_device *dev);
int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 86bcdd72a107..a1f5a05f2f36 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -416,6 +416,7 @@ int ipoib_ib_dev_open(struct net_device *dev)
ret = ipoib_ib_post_receives(dev);
if (ret) {
ipoib_warn(priv, "ipoib_ib_post_receives returned %d\n", ret);
+ ipoib_ib_dev_stop(dev);
return -1;
}
@@ -434,7 +435,7 @@ int ipoib_ib_dev_up(struct net_device *dev)
return ipoib_mcast_start_thread(dev);
}
-int ipoib_ib_dev_down(struct net_device *dev)
+int ipoib_ib_dev_down(struct net_device *dev, int flush)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -449,10 +450,11 @@ int ipoib_ib_dev_down(struct net_device *dev)
set_bit(IPOIB_PKEY_STOP, &priv->flags);
cancel_delayed_work(&priv->pkey_task);
mutex_unlock(&pkey_mutex);
- flush_workqueue(ipoib_workqueue);
+ if (flush)
+ flush_workqueue(ipoib_workqueue);
}
- ipoib_mcast_stop_thread(dev, 1);
+ ipoib_mcast_stop_thread(dev, flush);
ipoib_mcast_dev_flush(dev);
ipoib_flush_paths(dev);
@@ -590,7 +592,7 @@ void ipoib_ib_dev_flush(void *_dev)
ipoib_dbg(priv, "flushing\n");
- ipoib_ib_dev_down(dev);
+ ipoib_ib_dev_down(dev, 0);
/*
* The device could have been brought down between the start and when
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index c3b5f79d1168..37da8d3dc388 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -133,7 +133,13 @@ static int ipoib_stop(struct net_device *dev)
netif_stop_queue(dev);
- ipoib_ib_dev_down(dev);
+ /*
+ * Now flush workqueue to make sure a scheduled task doesn't
+ * bring our internal state back up.
+ */
+ flush_workqueue(ipoib_workqueue);
+
+ ipoib_ib_dev_down(dev, 1);
ipoib_ib_dev_stop(dev);
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
@@ -247,7 +253,6 @@ static void path_free(struct net_device *dev, struct ipoib_path *path)
if (neigh->ah)
ipoib_put_ah(neigh->ah);
*to_ipoib_neigh(neigh->neighbour) = NULL;
- neigh->neighbour->ops->destructor = NULL;
kfree(neigh);
}
@@ -513,12 +518,7 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
be32_to_cpup((__be32 *) skb->dst->neighbour->ha));
} else {
neigh->ah = NULL;
- if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
- __skb_queue_tail(&neigh->queue, skb);
- } else {
- ++priv->stats.tx_dropped;
- dev_kfree_skb_any(skb);
- }
+ __skb_queue_tail(&neigh->queue, skb);
if (!path->query && path_rec_start(dev, path))
goto err;
@@ -530,7 +530,6 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
err:
*to_ipoib_neigh(skb->dst->neighbour) = NULL;
list_del(&neigh->list);
- neigh->neighbour->ops->destructor = NULL;
kfree(neigh);
++priv->stats.tx_dropped;
@@ -769,21 +768,9 @@ static void ipoib_neigh_destructor(struct neighbour *n)
ipoib_put_ah(ah);
}
-static int ipoib_neigh_setup(struct neighbour *neigh)
-{
- /*
- * Is this kosher? I can't find anybody in the kernel that
- * sets neigh->destructor, so we should be able to set it here
- * without trouble.
- */
- neigh->ops->destructor = ipoib_neigh_destructor;
-
- return 0;
-}
-
static int ipoib_neigh_setup_dev(struct net_device *dev, struct neigh_parms *parms)
{
- parms->neigh_setup = ipoib_neigh_setup;
+ parms->neigh_destructor = ipoib_neigh_destructor;
return 0;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index a2408d7ec598..93c462eaf4fd 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -115,7 +115,6 @@ static void ipoib_mcast_free(struct ipoib_mcast *mcast)
if (neigh->ah)
ipoib_put_ah(neigh->ah);
*to_ipoib_neigh(neigh->neighbour) = NULL;
- neigh->neighbour->ops->destructor = NULL;
kfree(neigh);
}
@@ -213,6 +212,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
{
struct net_device *dev = mcast->dev;
struct ipoib_dev_priv *priv = netdev_priv(dev);
+ struct ipoib_ah *ah;
int ret;
mcast->mcmember = *mcmember;
@@ -269,8 +269,8 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
av.static_rate, priv->local_rate,
ib_sa_rate_enum_to_int(mcast->mcmember.rate));
- mcast->ah = ipoib_create_ah(dev, priv->pd, &av);
- if (!mcast->ah) {
+ ah = ipoib_create_ah(dev, priv->pd, &av);
+ if (!ah) {
ipoib_warn(priv, "ib_address_create failed\n");
} else {
ipoib_dbg_mcast(priv, "MGID " IPOIB_GID_FMT
@@ -280,6 +280,10 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
be16_to_cpu(mcast->mcmember.mlid),
mcast->mcmember.sl);
}
+
+ spin_lock_irq(&priv->lock);
+ mcast->ah = ah;
+ spin_unlock_irq(&priv->lock);
}
/* actually send any queued packets */
@@ -432,9 +436,11 @@ static void ipoib_mcast_join_complete(int status,
if (mcast->backoff > IPOIB_MAX_BACKOFF_SECONDS)
mcast->backoff = IPOIB_MAX_BACKOFF_SECONDS;
+ mutex_lock(&mcast_mutex);
+
+ spin_lock_irq(&priv->lock);
mcast->query = NULL;
- mutex_lock(&mcast_mutex);
if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) {
if (status == -ETIMEDOUT)
queue_work(ipoib_workqueue, &priv->mcast_task);
@@ -443,6 +449,7 @@ static void ipoib_mcast_join_complete(int status,
mcast->backoff * HZ);
} else
complete(&mcast->done);
+ spin_unlock_irq(&priv->lock);
mutex_unlock(&mcast_mutex);
return;
@@ -630,21 +637,27 @@ int ipoib_mcast_stop_thread(struct net_device *dev, int flush)
if (flush)
flush_workqueue(ipoib_workqueue);
+ spin_lock_irq(&priv->lock);
if (priv->broadcast && priv->broadcast->query) {
ib_sa_cancel_query(priv->broadcast->query_id, priv->broadcast->query);
priv->broadcast->query = NULL;
+ spin_unlock_irq(&priv->lock);
ipoib_dbg_mcast(priv, "waiting for bcast\n");
wait_for_completion(&priv->broadcast->done);
- }
+ } else
+ spin_unlock_irq(&priv->lock);
list_for_each_entry(mcast, &priv->multicast_list, list) {
+ spin_lock_irq(&priv->lock);
if (mcast->query) {
ib_sa_cancel_query(mcast->query_id, mcast->query);
mcast->query = NULL;
+ spin_unlock_irq(&priv->lock);
ipoib_dbg_mcast(priv, "waiting for MGID " IPOIB_GID_FMT "\n",
IPOIB_GID_ARG(mcast->mcmember.mgid));
wait_for_completion(&mcast->done);
- }
+ } else
+ spin_unlock_irq(&priv->lock);
}
return 0;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
index faaf10e5fc7b..18d2f53ec34c 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
@@ -255,6 +255,6 @@ void ipoib_event(struct ib_event_handler *handler,
record->event == IB_EVENT_LID_CHANGE ||
record->event == IB_EVENT_SM_CHANGE) {
ipoib_dbg(priv, "Port active event\n");
- schedule_work(&priv->flush_task);
+ queue_work(ipoib_workqueue, &priv->flush_task);
}
}
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 960dae5c87d1..a13dcdf90a4f 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1237,6 +1237,87 @@ static int srp_reset_host(struct scsi_cmnd *scmnd)
return ret;
}
+static ssize_t show_id_ext(struct class_device *cdev, char *buf)
+{
+ struct srp_target_port *target = host_to_target(class_to_shost(cdev));
+
+ if (target->state == SRP_TARGET_DEAD ||
+ target->state == SRP_TARGET_REMOVED)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%016llx\n",
+ (unsigned long long) be64_to_cpu(target->id_ext));
+}
+
+static ssize_t show_ioc_guid(struct class_device *cdev, char *buf)
+{
+ struct srp_target_port *target = host_to_target(class_to_shost(cdev));
+
+ if (target->state == SRP_TARGET_DEAD ||
+ target->state == SRP_TARGET_REMOVED)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%016llx\n",
+ (unsigned long long) be64_to_cpu(target->ioc_guid));
+}
+
+static ssize_t show_service_id(struct class_device *cdev, char *buf)
+{
+ struct srp_target_port *target = host_to_target(class_to_shost(cdev));
+
+ if (target->state == SRP_TARGET_DEAD ||
+ target->state == SRP_TARGET_REMOVED)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%016llx\n",
+ (unsigned long long) be64_to_cpu(target->service_id));
+}
+
+static ssize_t show_pkey(struct class_device *cdev, char *buf)
+{
+ struct srp_target_port *target = host_to_target(class_to_shost(cdev));
+
+ if (target->state == SRP_TARGET_DEAD ||
+ target->state == SRP_TARGET_REMOVED)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%04x\n", be16_to_cpu(target->path.pkey));
+}
+
+static ssize_t show_dgid(struct class_device *cdev, char *buf)
+{
+ struct srp_target_port *target = host_to_target(class_to_shost(cdev));
+
+ if (target->state == SRP_TARGET_DEAD ||
+ target->state == SRP_TARGET_REMOVED)
+ return -ENODEV;
+
+ return sprintf(buf, "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[0]),
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[1]),
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[2]),
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[3]),
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[4]),
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[5]),
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[6]),
+ be16_to_cpu(((__be16 *) target->path.dgid.raw)[7]));
+}
+
+static CLASS_DEVICE_ATTR(id_ext, S_IRUGO, show_id_ext, NULL);
+static CLASS_DEVICE_ATTR(ioc_guid, S_IRUGO, show_ioc_guid, NULL);
+static CLASS_DEVICE_ATTR(service_id, S_IRUGO, show_service_id, NULL);
+static CLASS_DEVICE_ATTR(pkey, S_IRUGO, show_pkey, NULL);
+static CLASS_DEVICE_ATTR(dgid, S_IRUGO, show_dgid, NULL);
+
+static struct class_device_attribute *srp_host_attrs[] = {
+ &class_device_attr_id_ext,
+ &class_device_attr_ioc_guid,
+ &class_device_attr_service_id,
+ &class_device_attr_pkey,
+ &class_device_attr_dgid,
+ NULL
+};
+
static struct scsi_host_template srp_template = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -1249,7 +1330,8 @@ static struct scsi_host_template srp_template = {
.this_id = -1,
.sg_tablesize = SRP_MAX_INDIRECT,
.cmd_per_lun = SRP_SQ_SIZE,
- .use_clustering = ENABLE_CLUSTERING
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = srp_host_attrs
};
static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
@@ -1366,6 +1448,7 @@ static int srp_parse_options(const char *buf, struct srp_target_port *target)
strlcpy(dgid, p + i * 2, 3);
target->path.dgid.raw[i] = simple_strtoul(dgid, NULL, 16);
}
+ kfree(p);
break;
case SRP_OPT_PKEY:
diff --git a/drivers/media/common/Makefile b/drivers/media/common/Makefile
index bd458cb9b4ea..61b89617a967 100644
--- a/drivers/media/common/Makefile
+++ b/drivers/media/common/Makefile
@@ -1,5 +1,6 @@
saa7146-objs := saa7146_i2c.o saa7146_core.o
saa7146_vv-objs := saa7146_vv_ksyms.o saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
+ir-common-objs := ir-functions.o ir-keymaps.o
obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o
diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c
deleted file mode 100644
index 97fa3fc571c4..000000000000
--- a/drivers/media/common/ir-common.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
- *
- * (c) 2003 Gerd Knorr [SuSE Labs]
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include
-#include
-#include
-#include
-
-/* -------------------------------------------------------------------------- */
-
-MODULE_AUTHOR("Gerd Knorr [SuSE Labs]");
-MODULE_LICENSE("GPL");
-
-static int repeat = 1;
-module_param(repeat, int, 0444);
-MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)");
-
-static int debug = 0; /* debug level (0,1,2) */
-module_param(debug, int, 0644);
-
-#define dprintk(level, fmt, arg...) if (debug >= level) \
- printk(KERN_DEBUG fmt , ## arg)
-
-/* -------------------------------------------------------------------------- */
-
-/* generic RC5 keytable */
-/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
-/* used by old (black) Hauppauge remotes */
-IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE] = {
- /* Keys 0 to 9 */
- [ 0x00 ] = KEY_KP0,
- [ 0x01 ] = KEY_KP1,
- [ 0x02 ] = KEY_KP2,
- [ 0x03 ] = KEY_KP3,
- [ 0x04 ] = KEY_KP4,
- [ 0x05 ] = KEY_KP5,
- [ 0x06 ] = KEY_KP6,
- [ 0x07 ] = KEY_KP7,
- [ 0x08 ] = KEY_KP8,
- [ 0x09 ] = KEY_KP9,
-
- [ 0x0b ] = KEY_CHANNEL, /* channel / program (japan: 11) */
- [ 0x0c ] = KEY_POWER, /* standby */
- [ 0x0d ] = KEY_MUTE, /* mute / demute */
- [ 0x0f ] = KEY_TV, /* display */
- [ 0x10 ] = KEY_VOLUMEUP,
- [ 0x11 ] = KEY_VOLUMEDOWN,
- [ 0x12 ] = KEY_BRIGHTNESSUP,
- [ 0x13 ] = KEY_BRIGHTNESSDOWN,
- [ 0x1e ] = KEY_SEARCH, /* search + */
- [ 0x20 ] = KEY_CHANNELUP, /* channel / program + */
- [ 0x21 ] = KEY_CHANNELDOWN, /* channel / program - */
- [ 0x22 ] = KEY_CHANNEL, /* alt / channel */
- [ 0x23 ] = KEY_LANGUAGE, /* 1st / 2nd language */
- [ 0x26 ] = KEY_SLEEP, /* sleeptimer */
- [ 0x2e ] = KEY_MENU, /* 2nd controls (USA: menu) */
- [ 0x30 ] = KEY_PAUSE,
- [ 0x32 ] = KEY_REWIND,
- [ 0x33 ] = KEY_GOTO,
- [ 0x35 ] = KEY_PLAY,
- [ 0x36 ] = KEY_STOP,
- [ 0x37 ] = KEY_RECORD, /* recording */
- [ 0x3c ] = KEY_TEXT, /* teletext submode (Japan: 12) */
- [ 0x3d ] = KEY_SUSPEND, /* system standby */
-
-};
-EXPORT_SYMBOL_GPL(ir_codes_rc5_tv);
-
-/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
-IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = {
- /* Keys 0 to 9 */
- [ 18 ] = KEY_KP0,
- [ 5 ] = KEY_KP1,
- [ 6 ] = KEY_KP2,
- [ 7 ] = KEY_KP3,
- [ 9 ] = KEY_KP4,
- [ 10 ] = KEY_KP5,
- [ 11 ] = KEY_KP6,
- [ 13 ] = KEY_KP7,
- [ 14 ] = KEY_KP8,
- [ 15 ] = KEY_KP9,
-
- [ 0 ] = KEY_POWER,
- [ 2 ] = KEY_TUNER, /* TV/FM */
- [ 30 ] = KEY_VIDEO,
- [ 4 ] = KEY_VOLUMEUP,
- [ 8 ] = KEY_VOLUMEDOWN,
- [ 12 ] = KEY_CHANNELUP,
- [ 16 ] = KEY_CHANNELDOWN,
- [ 3 ] = KEY_ZOOM, /* fullscreen */
- [ 31 ] = KEY_SUBTITLE, /* closed caption/teletext */
- [ 32 ] = KEY_SLEEP,
- [ 20 ] = KEY_MUTE,
- [ 43 ] = KEY_RED,
- [ 44 ] = KEY_GREEN,
- [ 45 ] = KEY_YELLOW,
- [ 46 ] = KEY_BLUE,
- [ 24 ] = KEY_KPPLUS, /* fine tune + */
- [ 25 ] = KEY_KPMINUS, /* fine tune - */
- [ 33 ] = KEY_KPDOT,
- [ 19 ] = KEY_KPENTER,
- [ 34 ] = KEY_BACK,
- [ 35 ] = KEY_PLAYPAUSE,
- [ 36 ] = KEY_NEXT,
- [ 38 ] = KEY_STOP,
- [ 39 ] = KEY_RECORD
-};
-EXPORT_SYMBOL_GPL(ir_codes_winfast);
-
-IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE] = {
- [ 0x59 ] = KEY_MUTE,
- [ 0x4a ] = KEY_POWER,
-
- [ 0x18 ] = KEY_TEXT,
- [ 0x26 ] = KEY_TV,
- [ 0x3d ] = KEY_PRINT,
-
- [ 0x48 ] = KEY_RED,
- [ 0x04 ] = KEY_GREEN,
- [ 0x11 ] = KEY_YELLOW,
- [ 0x00 ] = KEY_BLUE,
-
- [ 0x2d ] = KEY_VOLUMEUP,
- [ 0x1e ] = KEY_VOLUMEDOWN,
-
- [ 0x49 ] = KEY_MENU,
-
- [ 0x16 ] = KEY_CHANNELUP,
- [ 0x17 ] = KEY_CHANNELDOWN,
-
- [ 0x20 ] = KEY_UP,
- [ 0x21 ] = KEY_DOWN,
- [ 0x22 ] = KEY_LEFT,
- [ 0x23 ] = KEY_RIGHT,
- [ 0x0d ] = KEY_SELECT,
-
-
-
- [ 0x08 ] = KEY_BACK,
- [ 0x07 ] = KEY_REFRESH,
-
- [ 0x2f ] = KEY_ZOOM,
- [ 0x29 ] = KEY_RECORD,
-
- [ 0x4b ] = KEY_PAUSE,
- [ 0x4d ] = KEY_REWIND,
- [ 0x2e ] = KEY_PLAY,
- [ 0x4e ] = KEY_FORWARD,
- [ 0x53 ] = KEY_PREVIOUS,
- [ 0x4c ] = KEY_STOP,
- [ 0x54 ] = KEY_NEXT,
-
- [ 0x69 ] = KEY_KP0,
- [ 0x6a ] = KEY_KP1,
- [ 0x6b ] = KEY_KP2,
- [ 0x6c ] = KEY_KP3,
- [ 0x6d ] = KEY_KP4,
- [ 0x6e ] = KEY_KP5,
- [ 0x6f ] = KEY_KP6,
- [ 0x70 ] = KEY_KP7,
- [ 0x71 ] = KEY_KP8,
- [ 0x72 ] = KEY_KP9,
-
- [ 0x74 ] = KEY_CHANNEL,
- [ 0x0a ] = KEY_BACKSPACE,
-};
-
-EXPORT_SYMBOL_GPL(ir_codes_pinnacle);
-
-/* empty keytable, can be used as placeholder for not-yet created keytables */
-IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE] = {
- [ 42 ] = KEY_COFFEE,
-};
-EXPORT_SYMBOL_GPL(ir_codes_empty);
-
-/* Hauppauge: the newer, gray remotes (seems there are multiple
- * slightly different versions), shipped with cx88+ivtv cards.
- * almost rc5 coding, but some non-standard keys */
-IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE] = {
- /* Keys 0 to 9 */
- [ 0x00 ] = KEY_KP0,
- [ 0x01 ] = KEY_KP1,
- [ 0x02 ] = KEY_KP2,
- [ 0x03 ] = KEY_KP3,
- [ 0x04 ] = KEY_KP4,
- [ 0x05 ] = KEY_KP5,
- [ 0x06 ] = KEY_KP6,
- [ 0x07 ] = KEY_KP7,
- [ 0x08 ] = KEY_KP8,
- [ 0x09 ] = KEY_KP9,
-
- [ 0x0a ] = KEY_TEXT, /* keypad asterisk as well */
- [ 0x0b ] = KEY_RED, /* red button */
- [ 0x0c ] = KEY_RADIO,
- [ 0x0d ] = KEY_MENU,
- [ 0x0e ] = KEY_SUBTITLE, /* also the # key */
- [ 0x0f ] = KEY_MUTE,
- [ 0x10 ] = KEY_VOLUMEUP,
- [ 0x11 ] = KEY_VOLUMEDOWN,
- [ 0x12 ] = KEY_PREVIOUS, /* previous channel */
- [ 0x14 ] = KEY_UP,
- [ 0x15 ] = KEY_DOWN,
- [ 0x16 ] = KEY_LEFT,
- [ 0x17 ] = KEY_RIGHT,
- [ 0x18 ] = KEY_VIDEO, /* Videos */
- [ 0x19 ] = KEY_AUDIO, /* Music */
- /* 0x1a: Pictures - presume this means
- "Multimedia Home Platform" -
- no "PICTURES" key in input.h
- */
- [ 0x1a ] = KEY_MHP,
-
- [ 0x1b ] = KEY_EPG, /* Guide */
- [ 0x1c ] = KEY_TV,
- [ 0x1e ] = KEY_NEXTSONG, /* skip >| */
- [ 0x1f ] = KEY_EXIT, /* back/exit */
- [ 0x20 ] = KEY_CHANNELUP, /* channel / program + */
- [ 0x21 ] = KEY_CHANNELDOWN, /* channel / program - */
- [ 0x22 ] = KEY_CHANNEL, /* source (old black remote) */
- [ 0x24 ] = KEY_PREVIOUSSONG, /* replay |< */
- [ 0x25 ] = KEY_ENTER, /* OK */
- [ 0x26 ] = KEY_SLEEP, /* minimize (old black remote) */
- [ 0x29 ] = KEY_BLUE, /* blue key */
- [ 0x2e ] = KEY_GREEN, /* green button */
- [ 0x30 ] = KEY_PAUSE, /* pause */
- [ 0x32 ] = KEY_REWIND, /* backward << */
- [ 0x34 ] = KEY_FASTFORWARD, /* forward >> */
- [ 0x35 ] = KEY_PLAY,
- [ 0x36 ] = KEY_STOP,
- [ 0x37 ] = KEY_RECORD, /* recording */
- [ 0x38 ] = KEY_YELLOW, /* yellow key */
- [ 0x3b ] = KEY_SELECT, /* top right button */
- [ 0x3c ] = KEY_ZOOM, /* full */
- [ 0x3d ] = KEY_POWER, /* system power (green button) */
-};
-EXPORT_SYMBOL(ir_codes_hauppauge_new);
-
-IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE] = {
- [ 2 ] = KEY_KP0,
- [ 1 ] = KEY_KP1,
- [ 11 ] = KEY_KP2,
- [ 27 ] = KEY_KP3,
- [ 5 ] = KEY_KP4,
- [ 9 ] = KEY_KP5,
- [ 21 ] = KEY_KP6,
- [ 6 ] = KEY_KP7,
- [ 10 ] = KEY_KP8,
- [ 18 ] = KEY_KP9,
-
- [ 3 ] = KEY_TUNER, /* TV/FM */
- [ 7 ] = KEY_SEARCH, /* scan */
- [ 28 ] = KEY_ZOOM, /* full screen */
- [ 30 ] = KEY_POWER,
- [ 23 ] = KEY_VOLUMEDOWN,
- [ 31 ] = KEY_VOLUMEUP,
- [ 20 ] = KEY_CHANNELDOWN,
- [ 22 ] = KEY_CHANNELUP,
- [ 24 ] = KEY_MUTE,
-
- [ 0 ] = KEY_LIST, /* source */
- [ 19 ] = KEY_INFO, /* loop */
- [ 16 ] = KEY_LAST, /* +100 */
- [ 13 ] = KEY_CLEAR, /* reset */
- [ 12 ] = BTN_RIGHT, /* fun++ */
- [ 4 ] = BTN_LEFT, /* fun-- */
- [ 14 ] = KEY_GOTO, /* function */
- [ 15 ] = KEY_STOP, /* freeze */
-};
-EXPORT_SYMBOL(ir_codes_pixelview);
-
-/* -------------------------------------------------------------------------- */
-
-static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
-{
- if (KEY_RESERVED == ir->keycode) {
- printk(KERN_INFO "%s: unknown key: key=0x%02x raw=0x%02x down=%d\n",
- dev->name,ir->ir_key,ir->ir_raw,ir->keypressed);
- return;
- }
- dprintk(1,"%s: key event code=%d down=%d\n",
- dev->name,ir->keycode,ir->keypressed);
- input_report_key(dev,ir->keycode,ir->keypressed);
- input_sync(dev);
-}
-
-/* -------------------------------------------------------------------------- */
-
-void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
- int ir_type, IR_KEYTAB_TYPE *ir_codes)
-{
- int i;
-
- ir->ir_type = ir_type;
- if (ir_codes)
- memcpy(ir->ir_codes, ir_codes, sizeof(ir->ir_codes));
-
-
- dev->keycode = ir->ir_codes;
- dev->keycodesize = sizeof(IR_KEYTAB_TYPE);
- dev->keycodemax = IR_KEYTAB_SIZE;
- for (i = 0; i < IR_KEYTAB_SIZE; i++)
- set_bit(ir->ir_codes[i], dev->keybit);
- clear_bit(0, dev->keybit);
-
- set_bit(EV_KEY, dev->evbit);
- if (repeat)
- set_bit(EV_REP, dev->evbit);
-}
-
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir)
-{
- if (ir->keypressed) {
- ir->keypressed = 0;
- ir_input_key_event(dev,ir);
- }
-}
-
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
- u32 ir_key, u32 ir_raw)
-{
- u32 keycode = IR_KEYCODE(ir->ir_codes, ir_key);
-
- if (ir->keypressed && ir->keycode != keycode) {
- ir->keypressed = 0;
- ir_input_key_event(dev,ir);
- }
- if (!ir->keypressed) {
- ir->ir_key = ir_key;
- ir->ir_raw = ir_raw;
- ir->keycode = keycode;
- ir->keypressed = 1;
- ir_input_key_event(dev,ir);
- }
-}
-
-/* -------------------------------------------------------------------------- */
-
-u32 ir_extract_bits(u32 data, u32 mask)
-{
- int mbit, vbit;
- u32 value;
-
- value = 0;
- vbit = 0;
- for (mbit = 0; mbit < 32; mbit++) {
- if (!(mask & ((u32)1 << mbit)))
- continue;
- if (data & ((u32)1 << mbit))
- value |= (1 << vbit);
- vbit++;
- }
- return value;
-}
-
-static int inline getbit(u32 *samples, int bit)
-{
- return (samples[bit/32] & (1 << (31-(bit%32)))) ? 1 : 0;
-}
-
-/* sump raw samples for visual debugging ;) */
-int ir_dump_samples(u32 *samples, int count)
-{
- int i, bit, start;
-
- printk(KERN_DEBUG "ir samples: ");
- start = 0;
- for (i = 0; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (bit)
- start = 1;
- if (0 == start)
- continue;
- printk("%s", bit ? "#" : "_");
- }
- printk("\n");
- return 0;
-}
-
-/* decode raw samples, pulse distance coding used by NEC remotes */
-int ir_decode_pulsedistance(u32 *samples, int count, int low, int high)
-{
- int i,last,bit,len;
- u32 curBit;
- u32 value;
-
- /* find start burst */
- for (i = len = 0; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (bit) {
- len++;
- } else {
- if (len >= 29)
- break;
- len = 0;
- }
- }
-
- /* start burst to short */
- if (len < 29)
- return 0xffffffff;
-
- /* find start silence */
- for (len = 0; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (bit) {
- break;
- } else {
- len++;
- }
- }
-
- /* silence to short */
- if (len < 7)
- return 0xffffffff;
-
- /* go decoding */
- len = 0;
- last = 1;
- value = 0; curBit = 1;
- for (; i < count * 32; i++) {
- bit = getbit(samples,i);
- if (last) {
- if(bit) {
- continue;
- } else {
- len = 1;
- }
- } else {
- if (bit) {
- if (len > (low + high) /2)
- value |= curBit;
- curBit <<= 1;
- if (curBit == 1)
- break;
- } else {
- len++;
- }
- }
- last = bit;
- }
-
- return value;
-}
-
-/* decode raw samples, biphase coding, used by rc5 for example */
-int ir_decode_biphase(u32 *samples, int count, int low, int high)
-{
- int i,last,bit,len,flips;
- u32 value;
-
- /* find start bit (1) */
- for (i = 0; i < 32; i++) {
- bit = getbit(samples,i);
- if (bit)
- break;
- }
-
- /* go decoding */
- len = 0;
- flips = 0;
- value = 1;
- for (; i < count * 32; i++) {
- if (len > high)
- break;
- if (flips > 1)
- break;
- last = bit;
- bit = getbit(samples,i);
- if (last == bit) {
- len++;
- continue;
- }
- if (len < low) {
- len++;
- flips++;
- continue;
- }
- value <<= 1;
- value |= bit;
- flips = 0;
- len = 1;
- }
- return value;
-}
-
-EXPORT_SYMBOL_GPL(ir_input_init);
-EXPORT_SYMBOL_GPL(ir_input_nokey);
-EXPORT_SYMBOL_GPL(ir_input_keydown);
-
-EXPORT_SYMBOL_GPL(ir_extract_bits);
-EXPORT_SYMBOL_GPL(ir_dump_samples);
-EXPORT_SYMBOL_GPL(ir_decode_biphase);
-EXPORT_SYMBOL_GPL(ir_decode_pulsedistance);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
-
diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c
new file mode 100644
index 000000000000..397cff8b345b
--- /dev/null
+++ b/drivers/media/common/ir-functions.c
@@ -0,0 +1,272 @@
+/*
+ *
+ * some common structs and functions to handle infrared remotes via
+ * input layer ...
+ *
+ * (c) 2003 Gerd Knorr [SuSE Labs]
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include
+#include
+#include
+#include
+
+/* -------------------------------------------------------------------------- */
+
+MODULE_AUTHOR("Gerd Knorr [SuSE Labs]");
+MODULE_LICENSE("GPL");
+
+static int repeat = 1;
+module_param(repeat, int, 0444);
+MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)");
+
+static int debug = 0; /* debug level (0,1,2) */
+module_param(debug, int, 0644);
+
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG fmt , ## arg)
+
+/* -------------------------------------------------------------------------- */
+
+static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
+{
+ if (KEY_RESERVED == ir->keycode) {
+ printk(KERN_INFO "%s: unknown key: key=0x%02x raw=0x%02x down=%d\n",
+ dev->name,ir->ir_key,ir->ir_raw,ir->keypressed);
+ return;
+ }
+ dprintk(1,"%s: key event code=%d down=%d\n",
+ dev->name,ir->keycode,ir->keypressed);
+ input_report_key(dev,ir->keycode,ir->keypressed);
+ input_sync(dev);
+}
+
+/* -------------------------------------------------------------------------- */
+
+void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
+ int ir_type, IR_KEYTAB_TYPE *ir_codes)
+{
+ int i;
+
+ ir->ir_type = ir_type;
+ if (ir_codes)
+ memcpy(ir->ir_codes, ir_codes, sizeof(ir->ir_codes));
+
+
+ dev->keycode = ir->ir_codes;
+ dev->keycodesize = sizeof(IR_KEYTAB_TYPE);
+ dev->keycodemax = IR_KEYTAB_SIZE;
+ for (i = 0; i < IR_KEYTAB_SIZE; i++)
+ set_bit(ir->ir_codes[i], dev->keybit);
+ clear_bit(0, dev->keybit);
+
+ set_bit(EV_KEY, dev->evbit);
+ if (repeat)
+ set_bit(EV_REP, dev->evbit);
+}
+
+void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir)
+{
+ if (ir->keypressed) {
+ ir->keypressed = 0;
+ ir_input_key_event(dev,ir);
+ }
+}
+
+void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
+ u32 ir_key, u32 ir_raw)
+{
+ u32 keycode = IR_KEYCODE(ir->ir_codes, ir_key);
+
+ if (ir->keypressed && ir->keycode != keycode) {
+ ir->keypressed = 0;
+ ir_input_key_event(dev,ir);
+ }
+ if (!ir->keypressed) {
+ ir->ir_key = ir_key;
+ ir->ir_raw = ir_raw;
+ ir->keycode = keycode;
+ ir->keypressed = 1;
+ ir_input_key_event(dev,ir);
+ }
+}
+
+/* -------------------------------------------------------------------------- */
+
+u32 ir_extract_bits(u32 data, u32 mask)
+{
+ int mbit, vbit;
+ u32 value;
+
+ value = 0;
+ vbit = 0;
+ for (mbit = 0; mbit < 32; mbit++) {
+ if (!(mask & ((u32)1 << mbit)))
+ continue;
+ if (data & ((u32)1 << mbit))
+ value |= (1 << vbit);
+ vbit++;
+ }
+ return value;
+}
+
+static int inline getbit(u32 *samples, int bit)
+{
+ return (samples[bit/32] & (1 << (31-(bit%32)))) ? 1 : 0;
+}
+
+/* sump raw samples for visual debugging ;) */
+int ir_dump_samples(u32 *samples, int count)
+{
+ int i, bit, start;
+
+ printk(KERN_DEBUG "ir samples: ");
+ start = 0;
+ for (i = 0; i < count * 32; i++) {
+ bit = getbit(samples,i);
+ if (bit)
+ start = 1;
+ if (0 == start)
+ continue;
+ printk("%s", bit ? "#" : "_");
+ }
+ printk("\n");
+ return 0;
+}
+
+/* decode raw samples, pulse distance coding used by NEC remotes */
+int ir_decode_pulsedistance(u32 *samples, int count, int low, int high)
+{
+ int i,last,bit,len;
+ u32 curBit;
+ u32 value;
+
+ /* find start burst */
+ for (i = len = 0; i < count * 32; i++) {
+ bit = getbit(samples,i);
+ if (bit) {
+ len++;
+ } else {
+ if (len >= 29)
+ break;
+ len = 0;
+ }
+ }
+
+ /* start burst to short */
+ if (len < 29)
+ return 0xffffffff;
+
+ /* find start silence */
+ for (len = 0; i < count * 32; i++) {
+ bit = getbit(samples,i);
+ if (bit) {
+ break;
+ } else {
+ len++;
+ }
+ }
+
+ /* silence to short */
+ if (len < 7)
+ return 0xffffffff;
+
+ /* go decoding */
+ len = 0;
+ last = 1;
+ value = 0; curBit = 1;
+ for (; i < count * 32; i++) {
+ bit = getbit(samples,i);
+ if (last) {
+ if(bit) {
+ continue;
+ } else {
+ len = 1;
+ }
+ } else {
+ if (bit) {
+ if (len > (low + high) /2)
+ value |= curBit;
+ curBit <<= 1;
+ if (curBit == 1)
+ break;
+ } else {
+ len++;
+ }
+ }
+ last = bit;
+ }
+
+ return value;
+}
+
+/* decode raw samples, biphase coding, used by rc5 for example */
+int ir_decode_biphase(u32 *samples, int count, int low, int high)
+{
+ int i,last,bit,len,flips;
+ u32 value;
+
+ /* find start bit (1) */
+ for (i = 0; i < 32; i++) {
+ bit = getbit(samples,i);
+ if (bit)
+ break;
+ }
+
+ /* go decoding */
+ len = 0;
+ flips = 0;
+ value = 1;
+ for (; i < count * 32; i++) {
+ if (len > high)
+ break;
+ if (flips > 1)
+ break;
+ last = bit;
+ bit = getbit(samples,i);
+ if (last == bit) {
+ len++;
+ continue;
+ }
+ if (len < low) {
+ len++;
+ flips++;
+ continue;
+ }
+ value <<= 1;
+ value |= bit;
+ flips = 0;
+ len = 1;
+ }
+ return value;
+}
+
+EXPORT_SYMBOL_GPL(ir_input_init);
+EXPORT_SYMBOL_GPL(ir_input_nokey);
+EXPORT_SYMBOL_GPL(ir_input_keydown);
+
+EXPORT_SYMBOL_GPL(ir_extract_bits);
+EXPORT_SYMBOL_GPL(ir_dump_samples);
+EXPORT_SYMBOL_GPL(ir_decode_biphase);
+EXPORT_SYMBOL_GPL(ir_decode_pulsedistance);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
+
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
new file mode 100644
index 000000000000..a294d5c2c73f
--- /dev/null
+++ b/drivers/media/common/ir-keymaps.c
@@ -0,0 +1,1415 @@
+/*
+
+
+ Keytables for supported remote controls. This file is part of
+ video4linux.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+#include
+#include
+
+#include
+#include
+
+/* empty keytable, can be used as placeholder for not-yet created keytables */
+IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE] = {
+ [ 0x2a ] = KEY_COFFEE,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_empty);
+
+/* Matt Jesson >'
+ [ 0x3a ] = KEY_RECORD, // 'capture'
+ [ 0x0a ] = KEY_MUTE, // 'mute'
+ [ 0x2c ] = KEY_RECORD, // 'record'
+ [ 0x1c ] = KEY_PAUSE, // 'pause'
+ [ 0x3c ] = KEY_STOP, // 'stop'
+ [ 0x0c ] = KEY_PLAY, // 'play'
+ [ 0x2e ] = KEY_RED, // 'red'
+ [ 0x01 ] = KEY_BLUE, // 'blue' / 'cancel'
+ [ 0x0e ] = KEY_YELLOW, // 'yellow' / 'ok'
+ [ 0x21 ] = KEY_GREEN, // 'green'
+ [ 0x11 ] = KEY_CHANNELDOWN, // 'channel -'
+ [ 0x31 ] = KEY_CHANNELUP, // 'channel +'
+ [ 0x1e ] = KEY_VOLUMEDOWN, // 'volume -'
+ [ 0x3e ] = KEY_VOLUMEUP, // 'volume +'
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvbt);
+
+/* Attila Kondoros */
+IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = {
+
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+ [ 0x00 ] = KEY_0,
+ [ 0x17 ] = KEY_LAST, // +100
+ [ 0x0a ] = KEY_LIST, // recall
+
+
+ [ 0x1c ] = KEY_TUNER, // TV/FM
+ [ 0x15 ] = KEY_SEARCH, // scan
+ [ 0x12 ] = KEY_POWER, // power
+ [ 0x1f ] = KEY_VOLUMEDOWN, // vol up
+ [ 0x1b ] = KEY_VOLUMEUP, // vol down
+ [ 0x1e ] = KEY_CHANNELDOWN, // chn up
+ [ 0x1a ] = KEY_CHANNELUP, // chn down
+
+ [ 0x11 ] = KEY_VIDEO, // video
+ [ 0x0f ] = KEY_ZOOM, // full screen
+ [ 0x13 ] = KEY_MUTE, // mute/unmute
+ [ 0x10 ] = KEY_TEXT, // min
+
+ [ 0x0d ] = KEY_STOP, // freeze
+ [ 0x0e ] = KEY_RECORD, // record
+ [ 0x1d ] = KEY_PLAYPAUSE, // stop
+ [ 0x19 ] = KEY_PLAY, // play
+
+ [ 0x16 ] = KEY_GOTO, // osd
+ [ 0x14 ] = KEY_REFRESH, // default
+ [ 0x0c ] = KEY_KPPLUS, // fine tune >>>>
+ [ 0x18 ] = KEY_KPMINUS // fine tune <<<<
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_apac_viewcomp);
+
+/* ---------------------------------------------------------------------- */
+
+IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE] = {
+
+ [ 0x1e ] = KEY_POWER, // power
+ [ 0x07 ] = KEY_MEDIA, // source
+ [ 0x1c ] = KEY_SEARCH, // scan
+
+/* FIXME: duplicate keycodes?
+ *
+ * These four keys seem to share the same GPIO as CH+, CH-, <<< and >>>
+ * The GPIO values are
+ * 6397fb for both "Scan <" and "CH -",
+ * 639ffb for "Scan >" and "CH+",
+ * 6384fb for "Tune <" and "<<<",
+ * 638cfb for "Tune >" and ">>>", regardless of the mask.
+ *
+ * [ 0x17 ] = KEY_BACK, // fm scan <<
+ * [ 0x1f ] = KEY_FORWARD, // fm scan >>
+ *
+ * [ 0x04 ] = KEY_LEFT, // fm tuning <
+ * [ 0x0c ] = KEY_RIGHT, // fm tuning >
+ *
+ * For now, these four keys are disabled. Pressing them will generate
+ * the CH+/CH-/<<>> events
+ */
+
+ [ 0x03 ] = KEY_TUNER, // TV/FM
+
+ [ 0x00 ] = KEY_RECORD,
+ [ 0x08 ] = KEY_STOP,
+ [ 0x11 ] = KEY_PLAY,
+
+ [ 0x1a ] = KEY_PLAYPAUSE, // freeze
+ [ 0x19 ] = KEY_ZOOM, // zoom
+ [ 0x0f ] = KEY_TEXT, // min
+
+ [ 0x01 ] = KEY_1,
+ [ 0x0b ] = KEY_2,
+ [ 0x1b ] = KEY_3,
+ [ 0x05 ] = KEY_4,
+ [ 0x09 ] = KEY_5,
+ [ 0x15 ] = KEY_6,
+ [ 0x06 ] = KEY_7,
+ [ 0x0a ] = KEY_8,
+ [ 0x12 ] = KEY_9,
+ [ 0x02 ] = KEY_0,
+ [ 0x10 ] = KEY_LAST, // +100
+ [ 0x13 ] = KEY_LIST, // recall
+
+ [ 0x1f ] = KEY_CHANNELUP, // chn down
+ [ 0x17 ] = KEY_CHANNELDOWN, // chn up
+ [ 0x16 ] = KEY_VOLUMEUP, // vol down
+ [ 0x14 ] = KEY_VOLUMEDOWN, // vol up
+
+ [ 0x04 ] = KEY_KPMINUS, // <<<
+ [ 0x0e ] = KEY_SETUP, // function
+ [ 0x0c ] = KEY_KPPLUS, // >>>
+
+ [ 0x0d ] = KEY_GOTO, // mts
+ [ 0x1d ] = KEY_REFRESH, // reset
+ [ 0x18 ] = KEY_MUTE // mute/unmute
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_pixelview);
+
+IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+ [ 0x0a ] = KEY_TV,
+ [ 0x0b ] = KEY_AUX,
+ [ 0x0c ] = KEY_DVD,
+ [ 0x0d ] = KEY_POWER,
+ [ 0x0e ] = KEY_MHP, /* labelled 'Picture' */
+ [ 0x0f ] = KEY_AUDIO,
+ [ 0x10 ] = KEY_INFO,
+ [ 0x11 ] = KEY_F13, /* 16:9 */
+ [ 0x12 ] = KEY_F14, /* 14:9 */
+ [ 0x13 ] = KEY_EPG,
+ [ 0x14 ] = KEY_EXIT,
+ [ 0x15 ] = KEY_MENU,
+ [ 0x16 ] = KEY_UP,
+ [ 0x17 ] = KEY_DOWN,
+ [ 0x18 ] = KEY_LEFT,
+ [ 0x19 ] = KEY_RIGHT,
+ [ 0x1a ] = KEY_ENTER,
+ [ 0x1b ] = KEY_CHANNELUP,
+ [ 0x1c ] = KEY_CHANNELDOWN,
+ [ 0x1d ] = KEY_VOLUMEUP,
+ [ 0x1e ] = KEY_VOLUMEDOWN,
+ [ 0x1f ] = KEY_RED,
+ [ 0x20 ] = KEY_GREEN,
+ [ 0x21 ] = KEY_YELLOW,
+ [ 0x22 ] = KEY_BLUE,
+ [ 0x23 ] = KEY_SUBTITLE,
+ [ 0x24 ] = KEY_F15, /* AD */
+ [ 0x25 ] = KEY_TEXT,
+ [ 0x26 ] = KEY_MUTE,
+ [ 0x27 ] = KEY_REWIND,
+ [ 0x28 ] = KEY_STOP,
+ [ 0x29 ] = KEY_PLAY,
+ [ 0x2a ] = KEY_FASTFORWARD,
+ [ 0x2b ] = KEY_F16, /* chapter */
+ [ 0x2c ] = KEY_PAUSE,
+ [ 0x2d ] = KEY_PLAY,
+ [ 0x2e ] = KEY_RECORD,
+ [ 0x2f ] = KEY_F17, /* picture in picture */
+ [ 0x30 ] = KEY_KPPLUS, /* zoom in */
+ [ 0x31 ] = KEY_KPMINUS, /* zoom out */
+ [ 0x32 ] = KEY_F18, /* capture */
+ [ 0x33 ] = KEY_F19, /* web */
+ [ 0x34 ] = KEY_EMAIL,
+ [ 0x35 ] = KEY_PHONE,
+ [ 0x36 ] = KEY_PC
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_nebula);
+
+/* DigitalNow DNTV Live DVB-T Remote */
+IR_KEYTAB_TYPE ir_codes_dntv_live_dvb_t[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_ESC, /* 'go up a level?' */
+ /* Keys 0 to 9 */
+ [ 0x0a ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ [ 0x0b ] = KEY_TUNER, /* tv/fm */
+ [ 0x0c ] = KEY_SEARCH, /* scan */
+ [ 0x0d ] = KEY_STOP,
+ [ 0x0e ] = KEY_PAUSE,
+ [ 0x0f ] = KEY_LIST, /* source */
+
+ [ 0x10 ] = KEY_MUTE,
+ [ 0x11 ] = KEY_REWIND, /* backward << */
+ [ 0x12 ] = KEY_POWER,
+ [ 0x13 ] = KEY_S, /* snap */
+ [ 0x14 ] = KEY_AUDIO, /* stereo */
+ [ 0x15 ] = KEY_CLEAR, /* reset */
+ [ 0x16 ] = KEY_PLAY,
+ [ 0x17 ] = KEY_ENTER,
+ [ 0x18 ] = KEY_ZOOM, /* full screen */
+ [ 0x19 ] = KEY_FASTFORWARD, /* forward >> */
+ [ 0x1a ] = KEY_CHANNELUP,
+ [ 0x1b ] = KEY_VOLUMEUP,
+ [ 0x1c ] = KEY_INFO, /* preview */
+ [ 0x1d ] = KEY_RECORD, /* record */
+ [ 0x1e ] = KEY_CHANNELDOWN,
+ [ 0x1f ] = KEY_VOLUMEDOWN,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_dntv_live_dvb_t);
+
+/* ---------------------------------------------------------------------- */
+
+/* IO-DATA BCTV7E Remote */
+IR_KEYTAB_TYPE ir_codes_iodata_bctv7e[IR_KEYTAB_SIZE] = {
+ [ 0x40 ] = KEY_TV,
+ [ 0x20 ] = KEY_RADIO, /* FM */
+ [ 0x60 ] = KEY_EPG,
+ [ 0x00 ] = KEY_POWER,
+
+ /* Keys 0 to 9 */
+ [ 0x44 ] = KEY_0, /* 10 */
+ [ 0x50 ] = KEY_1,
+ [ 0x30 ] = KEY_2,
+ [ 0x70 ] = KEY_3,
+ [ 0x48 ] = KEY_4,
+ [ 0x28 ] = KEY_5,
+ [ 0x68 ] = KEY_6,
+ [ 0x58 ] = KEY_7,
+ [ 0x38 ] = KEY_8,
+ [ 0x78 ] = KEY_9,
+
+ [ 0x10 ] = KEY_L, /* Live */
+ [ 0x08 ] = KEY_T, /* Time Shift */
+
+ [ 0x18 ] = KEY_PLAYPAUSE, /* Play */
+
+ [ 0x24 ] = KEY_ENTER, /* 11 */
+ [ 0x64 ] = KEY_ESC, /* 12 */
+ [ 0x04 ] = KEY_M, /* Multi */
+
+ [ 0x54 ] = KEY_VIDEO,
+ [ 0x34 ] = KEY_CHANNELUP,
+ [ 0x74 ] = KEY_VOLUMEUP,
+ [ 0x14 ] = KEY_MUTE,
+
+ [ 0x4c ] = KEY_S, /* SVIDEO */
+ [ 0x2c ] = KEY_CHANNELDOWN,
+ [ 0x6c ] = KEY_VOLUMEDOWN,
+ [ 0x0c ] = KEY_ZOOM,
+
+ [ 0x5c ] = KEY_PAUSE,
+ [ 0x3c ] = KEY_C, /* || (red) */
+ [ 0x7c ] = KEY_RECORD, /* recording */
+ [ 0x1c ] = KEY_STOP,
+
+ [ 0x41 ] = KEY_REWIND, /* backward << */
+ [ 0x21 ] = KEY_PLAY,
+ [ 0x61 ] = KEY_FASTFORWARD, /* forward >> */
+ [ 0x01 ] = KEY_NEXT, /* skip >| */
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_iodata_bctv7e);
+
+/* ---------------------------------------------------------------------- */
+
+/* ADS Tech Instant TV DVB-T PCI Remote */
+IR_KEYTAB_TYPE ir_codes_adstech_dvb_t_pci[IR_KEYTAB_SIZE] = {
+ /* Keys 0 to 9 */
+ [ 0x4d ] = KEY_0,
+ [ 0x57 ] = KEY_1,
+ [ 0x4f ] = KEY_2,
+ [ 0x53 ] = KEY_3,
+ [ 0x56 ] = KEY_4,
+ [ 0x4e ] = KEY_5,
+ [ 0x5e ] = KEY_6,
+ [ 0x54 ] = KEY_7,
+ [ 0x4c ] = KEY_8,
+ [ 0x5c ] = KEY_9,
+
+ [ 0x5b ] = KEY_POWER,
+ [ 0x5f ] = KEY_MUTE,
+ [ 0x55 ] = KEY_GOTO,
+ [ 0x5d ] = KEY_SEARCH,
+ [ 0x17 ] = KEY_EPG, /* Guide */
+ [ 0x1f ] = KEY_MENU,
+ [ 0x0f ] = KEY_UP,
+ [ 0x46 ] = KEY_DOWN,
+ [ 0x16 ] = KEY_LEFT,
+ [ 0x1e ] = KEY_RIGHT,
+ [ 0x0e ] = KEY_SELECT, /* Enter */
+ [ 0x5a ] = KEY_INFO,
+ [ 0x52 ] = KEY_EXIT,
+ [ 0x59 ] = KEY_PREVIOUS,
+ [ 0x51 ] = KEY_NEXT,
+ [ 0x58 ] = KEY_REWIND,
+ [ 0x50 ] = KEY_FORWARD,
+ [ 0x44 ] = KEY_PLAYPAUSE,
+ [ 0x07 ] = KEY_STOP,
+ [ 0x1b ] = KEY_RECORD,
+ [ 0x13 ] = KEY_TUNER, /* Live */
+ [ 0x0a ] = KEY_A,
+ [ 0x12 ] = KEY_B,
+ [ 0x03 ] = KEY_PROG1, /* 1 */
+ [ 0x01 ] = KEY_PROG2, /* 2 */
+ [ 0x00 ] = KEY_PROG3, /* 3 */
+ [ 0x06 ] = KEY_DVD,
+ [ 0x48 ] = KEY_AUX, /* Photo */
+ [ 0x40 ] = KEY_VIDEO,
+ [ 0x19 ] = KEY_AUDIO, /* Music */
+ [ 0x0b ] = KEY_CHANNELUP,
+ [ 0x08 ] = KEY_CHANNELDOWN,
+ [ 0x15 ] = KEY_VOLUMEUP,
+ [ 0x1c ] = KEY_VOLUMEDOWN,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_adstech_dvb_t_pci);
+
+/* ---------------------------------------------------------------------- */
+
+/* MSI TV@nywhere remote */
+IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = {
+ /* Keys 0 to 9 */
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ [ 0x0c ] = KEY_MUTE,
+ [ 0x0f ] = KEY_SCREEN, /* Full Screen */
+ [ 0x10 ] = KEY_F, /* Funtion */
+ [ 0x11 ] = KEY_T, /* Time shift */
+ [ 0x12 ] = KEY_POWER,
+ [ 0x13 ] = KEY_MEDIA, /* MTS */
+ [ 0x14 ] = KEY_SLOW,
+ [ 0x16 ] = KEY_REWIND, /* backward << */
+ [ 0x17 ] = KEY_ENTER, /* Return */
+ [ 0x18 ] = KEY_FASTFORWARD, /* forward >> */
+ [ 0x1a ] = KEY_CHANNELUP,
+ [ 0x1b ] = KEY_VOLUMEUP,
+ [ 0x1e ] = KEY_CHANNELDOWN,
+ [ 0x1f ] = KEY_VOLUMEDOWN,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere);
+
+/* ---------------------------------------------------------------------- */
+
+/* Cinergy 1400 DVB-T */
+IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = {
+ [ 0x01 ] = KEY_POWER,
+ [ 0x02 ] = KEY_1,
+ [ 0x03 ] = KEY_2,
+ [ 0x04 ] = KEY_3,
+ [ 0x05 ] = KEY_4,
+ [ 0x06 ] = KEY_5,
+ [ 0x07 ] = KEY_6,
+ [ 0x08 ] = KEY_7,
+ [ 0x09 ] = KEY_8,
+ [ 0x0a ] = KEY_9,
+ [ 0x0c ] = KEY_0,
+
+ [ 0x0b ] = KEY_VIDEO,
+ [ 0x0d ] = KEY_REFRESH,
+ [ 0x0e ] = KEY_SELECT,
+ [ 0x0f ] = KEY_EPG,
+ [ 0x10 ] = KEY_UP,
+ [ 0x11 ] = KEY_LEFT,
+ [ 0x12 ] = KEY_OK,
+ [ 0x13 ] = KEY_RIGHT,
+ [ 0x14 ] = KEY_DOWN,
+ [ 0x15 ] = KEY_TEXT,
+ [ 0x16 ] = KEY_INFO,
+
+ [ 0x17 ] = KEY_RED,
+ [ 0x18 ] = KEY_GREEN,
+ [ 0x19 ] = KEY_YELLOW,
+ [ 0x1a ] = KEY_BLUE,
+
+ [ 0x1b ] = KEY_CHANNELUP,
+ [ 0x1c ] = KEY_VOLUMEUP,
+ [ 0x1d ] = KEY_MUTE,
+ [ 0x1e ] = KEY_VOLUMEDOWN,
+ [ 0x1f ] = KEY_CHANNELDOWN,
+
+ [ 0x40 ] = KEY_PAUSE,
+ [ 0x4c ] = KEY_PLAY,
+ [ 0x58 ] = KEY_RECORD,
+ [ 0x54 ] = KEY_PREVIOUS,
+ [ 0x48 ] = KEY_STOP,
+ [ 0x5c ] = KEY_NEXT,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_cinergy_1400);
+
+/* ---------------------------------------------------------------------- */
+
+/* AVERTV STUDIO 303 Remote */
+IR_KEYTAB_TYPE ir_codes_avertv_303[IR_KEYTAB_SIZE] = {
+ [ 0x2a ] = KEY_1,
+ [ 0x32 ] = KEY_2,
+ [ 0x3a ] = KEY_3,
+ [ 0x4a ] = KEY_4,
+ [ 0x52 ] = KEY_5,
+ [ 0x5a ] = KEY_6,
+ [ 0x6a ] = KEY_7,
+ [ 0x72 ] = KEY_8,
+ [ 0x7a ] = KEY_9,
+ [ 0x0e ] = KEY_0,
+
+ [ 0x02 ] = KEY_POWER,
+ [ 0x22 ] = KEY_VIDEO,
+ [ 0x42 ] = KEY_AUDIO,
+ [ 0x62 ] = KEY_ZOOM,
+ [ 0x0a ] = KEY_TV,
+ [ 0x12 ] = KEY_CD,
+ [ 0x1a ] = KEY_TEXT,
+
+ [ 0x16 ] = KEY_SUBTITLE,
+ [ 0x1e ] = KEY_REWIND,
+ [ 0x06 ] = KEY_PRINT,
+
+ [ 0x2e ] = KEY_SEARCH,
+ [ 0x36 ] = KEY_SLEEP,
+ [ 0x3e ] = KEY_SHUFFLE,
+ [ 0x26 ] = KEY_MUTE,
+
+ [ 0x4e ] = KEY_RECORD,
+ [ 0x56 ] = KEY_PAUSE,
+ [ 0x5e ] = KEY_STOP,
+ [ 0x46 ] = KEY_PLAY,
+
+ [ 0x6e ] = KEY_RED,
+ [ 0x0b ] = KEY_GREEN,
+ [ 0x66 ] = KEY_YELLOW,
+ [ 0x03 ] = KEY_BLUE,
+
+ [ 0x76 ] = KEY_LEFT,
+ [ 0x7e ] = KEY_RIGHT,
+ [ 0x13 ] = KEY_DOWN,
+ [ 0x1b ] = KEY_UP,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_avertv_303);
+
+/* ---------------------------------------------------------------------- */
+
+/* DigitalNow DNTV Live! DVB-T Pro Remote */
+IR_KEYTAB_TYPE ir_codes_dntv_live_dvbt_pro[IR_KEYTAB_SIZE] = {
+ [ 0x16 ] = KEY_POWER,
+ [ 0x5b ] = KEY_HOME,
+
+ [ 0x55 ] = KEY_TV, /* live tv */
+ [ 0x58 ] = KEY_TUNER, /* digital Radio */
+ [ 0x5a ] = KEY_RADIO, /* FM radio */
+ [ 0x59 ] = KEY_DVD, /* dvd menu */
+ [ 0x03 ] = KEY_1,
+ [ 0x01 ] = KEY_2,
+ [ 0x06 ] = KEY_3,
+ [ 0x09 ] = KEY_4,
+ [ 0x1d ] = KEY_5,
+ [ 0x1f ] = KEY_6,
+ [ 0x0d ] = KEY_7,
+ [ 0x19 ] = KEY_8,
+ [ 0x1b ] = KEY_9,
+ [ 0x0c ] = KEY_CANCEL,
+ [ 0x15 ] = KEY_0,
+ [ 0x4a ] = KEY_CLEAR,
+ [ 0x13 ] = KEY_BACK,
+ [ 0x00 ] = KEY_TAB,
+ [ 0x4b ] = KEY_UP,
+ [ 0x4e ] = KEY_LEFT,
+ [ 0x4f ] = KEY_OK,
+ [ 0x52 ] = KEY_RIGHT,
+ [ 0x51 ] = KEY_DOWN,
+ [ 0x1e ] = KEY_VOLUMEUP,
+ [ 0x0a ] = KEY_VOLUMEDOWN,
+ [ 0x02 ] = KEY_CHANNELDOWN,
+ [ 0x05 ] = KEY_CHANNELUP,
+ [ 0x11 ] = KEY_RECORD,
+ [ 0x14 ] = KEY_PLAY,
+ [ 0x4c ] = KEY_PAUSE,
+ [ 0x1a ] = KEY_STOP,
+ [ 0x40 ] = KEY_REWIND,
+ [ 0x12 ] = KEY_FASTFORWARD,
+ [ 0x41 ] = KEY_PREVIOUSSONG, /* replay |< */
+ [ 0x42 ] = KEY_NEXTSONG, /* skip >| */
+ [ 0x54 ] = KEY_CAMERA, /* capture */
+ [ 0x50 ] = KEY_LANGUAGE, /* sap */
+ [ 0x47 ] = KEY_TV2, /* pip */
+ [ 0x4d ] = KEY_SCREEN,
+ [ 0x43 ] = KEY_SUBTITLE,
+ [ 0x10 ] = KEY_MUTE,
+ [ 0x49 ] = KEY_AUDIO, /* l/r */
+ [ 0x07 ] = KEY_SLEEP,
+ [ 0x08 ] = KEY_VIDEO, /* a/v */
+ [ 0x0e ] = KEY_PREVIOUS, /* recall */
+ [ 0x45 ] = KEY_ZOOM, /* zoom + */
+ [ 0x46 ] = KEY_ANGLE, /* zoom - */
+ [ 0x56 ] = KEY_RED,
+ [ 0x57 ] = KEY_GREEN,
+ [ 0x5c ] = KEY_YELLOW,
+ [ 0x5d ] = KEY_BLUE,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_dntv_live_dvbt_pro);
+
+IR_KEYTAB_TYPE ir_codes_em_terratec[IR_KEYTAB_SIZE] = {
+ [ 0x01 ] = KEY_CHANNEL,
+ [ 0x02 ] = KEY_SELECT,
+ [ 0x03 ] = KEY_MUTE,
+ [ 0x04 ] = KEY_POWER,
+ [ 0x05 ] = KEY_1,
+ [ 0x06 ] = KEY_2,
+ [ 0x07 ] = KEY_3,
+ [ 0x08 ] = KEY_CHANNELUP,
+ [ 0x09 ] = KEY_4,
+ [ 0x0a ] = KEY_5,
+ [ 0x0b ] = KEY_6,
+ [ 0x0c ] = KEY_CHANNELDOWN,
+ [ 0x0d ] = KEY_7,
+ [ 0x0e ] = KEY_8,
+ [ 0x0f ] = KEY_9,
+ [ 0x10 ] = KEY_VOLUMEUP,
+ [ 0x11 ] = KEY_0,
+ [ 0x12 ] = KEY_MENU,
+ [ 0x13 ] = KEY_PRINT,
+ [ 0x14 ] = KEY_VOLUMEDOWN,
+ [ 0x16 ] = KEY_PAUSE,
+ [ 0x18 ] = KEY_RECORD,
+ [ 0x19 ] = KEY_REWIND,
+ [ 0x1a ] = KEY_PLAY,
+ [ 0x1b ] = KEY_FORWARD,
+ [ 0x1c ] = KEY_BACKSPACE,
+ [ 0x1e ] = KEY_STOP,
+ [ 0x40 ] = KEY_ZOOM,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_em_terratec);
+
+IR_KEYTAB_TYPE ir_codes_em_pinnacle_usb[IR_KEYTAB_SIZE] = {
+ [ 0x3a ] = KEY_0,
+ [ 0x31 ] = KEY_1,
+ [ 0x32 ] = KEY_2,
+ [ 0x33 ] = KEY_3,
+ [ 0x34 ] = KEY_4,
+ [ 0x35 ] = KEY_5,
+ [ 0x36 ] = KEY_6,
+ [ 0x37 ] = KEY_7,
+ [ 0x38 ] = KEY_8,
+ [ 0x39 ] = KEY_9,
+
+ [ 0x2f ] = KEY_POWER,
+
+ [ 0x2e ] = KEY_P,
+ [ 0x1f ] = KEY_L,
+ [ 0x2b ] = KEY_I,
+
+ [ 0x2d ] = KEY_ZOOM,
+ [ 0x1e ] = KEY_ZOOM,
+ [ 0x1b ] = KEY_VOLUMEUP,
+ [ 0x0f ] = KEY_VOLUMEDOWN,
+ [ 0x17 ] = KEY_CHANNELUP,
+ [ 0x1c ] = KEY_CHANNELDOWN,
+ [ 0x25 ] = KEY_INFO,
+
+ [ 0x3c ] = KEY_MUTE,
+
+ [ 0x3d ] = KEY_LEFT,
+ [ 0x3b ] = KEY_RIGHT,
+
+ [ 0x3f ] = KEY_UP,
+ [ 0x3e ] = KEY_DOWN,
+ [ 0x1a ] = KEY_PAUSE,
+
+ [ 0x1d ] = KEY_MENU,
+ [ 0x19 ] = KEY_PLAY,
+ [ 0x16 ] = KEY_REWIND,
+ [ 0x13 ] = KEY_FORWARD,
+ [ 0x15 ] = KEY_PAUSE,
+ [ 0x0e ] = KEY_REWIND,
+ [ 0x0d ] = KEY_PLAY,
+ [ 0x0b ] = KEY_STOP,
+ [ 0x07 ] = KEY_FORWARD,
+ [ 0x27 ] = KEY_RECORD,
+ [ 0x26 ] = KEY_TUNER,
+ [ 0x29 ] = KEY_TEXT,
+ [ 0x2a ] = KEY_MEDIA,
+ [ 0x18 ] = KEY_EPG,
+ [ 0x27 ] = KEY_RECORD,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_em_pinnacle_usb);
+
+IR_KEYTAB_TYPE ir_codes_flyvideo[IR_KEYTAB_SIZE] = {
+ [ 0x0f ] = KEY_0,
+ [ 0x03 ] = KEY_1,
+ [ 0x04 ] = KEY_2,
+ [ 0x05 ] = KEY_3,
+ [ 0x07 ] = KEY_4,
+ [ 0x08 ] = KEY_5,
+ [ 0x09 ] = KEY_6,
+ [ 0x0b ] = KEY_7,
+ [ 0x0c ] = KEY_8,
+ [ 0x0d ] = KEY_9,
+
+ [ 0x0e ] = KEY_MODE, // Air/Cable
+ [ 0x11 ] = KEY_VIDEO, // Video
+ [ 0x15 ] = KEY_AUDIO, // Audio
+ [ 0x00 ] = KEY_POWER, // Power
+ [ 0x18 ] = KEY_TUNER, // AV Source
+ [ 0x02 ] = KEY_ZOOM, // Fullscreen
+ [ 0x1a ] = KEY_LANGUAGE, // Stereo
+ [ 0x1b ] = KEY_MUTE, // Mute
+ [ 0x14 ] = KEY_VOLUMEUP, // Volume +
+ [ 0x17 ] = KEY_VOLUMEDOWN, // Volume -
+ [ 0x12 ] = KEY_CHANNELUP, // Channel +
+ [ 0x13 ] = KEY_CHANNELDOWN, // Channel -
+ [ 0x06 ] = KEY_AGAIN, // Recall
+ [ 0x10 ] = KEY_ENTER, // Enter
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_flyvideo);
+
+IR_KEYTAB_TYPE ir_codes_flydvb[IR_KEYTAB_SIZE] = {
+ [ 0x01 ] = KEY_ZOOM, // Full Screen
+ [ 0x00 ] = KEY_POWER, // Power
+
+ [ 0x03 ] = KEY_1,
+ [ 0x04 ] = KEY_2,
+ [ 0x05 ] = KEY_3,
+ [ 0x07 ] = KEY_4,
+ [ 0x08 ] = KEY_5,
+ [ 0x09 ] = KEY_6,
+ [ 0x0b ] = KEY_7,
+ [ 0x0c ] = KEY_8,
+ [ 0x0d ] = KEY_9,
+ [ 0x06 ] = KEY_AGAIN, // Recall
+ [ 0x0f ] = KEY_0,
+ [ 0x10 ] = KEY_MUTE, // Mute
+ [ 0x02 ] = KEY_RADIO, // TV/Radio
+ [ 0x1b ] = KEY_LANGUAGE, // SAP (Second Audio Program)
+
+ [ 0x14 ] = KEY_VOLUMEUP, // VOL+
+ [ 0x17 ] = KEY_VOLUMEDOWN, // VOL-
+ [ 0x12 ] = KEY_CHANNELUP, // CH+
+ [ 0x13 ] = KEY_CHANNELDOWN, // CH-
+ [ 0x1d ] = KEY_ENTER, // Enter
+
+ [ 0x1a ] = KEY_MODE, // PIP
+ [ 0x18 ] = KEY_TUNER, // Source
+
+ [ 0x1e ] = KEY_RECORD, // Record/Pause
+ [ 0x15 ] = KEY_ANGLE, // Swap (no label on key)
+ [ 0x1c ] = KEY_PAUSE, // Timeshift/Pause
+ [ 0x19 ] = KEY_BACK, // Rewind <<
+ [ 0x0a ] = KEY_PLAYPAUSE, // Play/Pause
+ [ 0x1f ] = KEY_FORWARD, // Forward >>
+ [ 0x16 ] = KEY_PREVIOUS, // Back |<<
+ [ 0x11 ] = KEY_STOP, // Stop
+ [ 0x0e ] = KEY_NEXT, // End >>|
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_flydvb);
+
+IR_KEYTAB_TYPE ir_codes_cinergy[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ [ 0x0a ] = KEY_POWER,
+ [ 0x0b ] = KEY_PROG1, // app
+ [ 0x0c ] = KEY_ZOOM, // zoom/fullscreen
+ [ 0x0d ] = KEY_CHANNELUP, // channel
+ [ 0x0e ] = KEY_CHANNELDOWN, // channel-
+ [ 0x0f ] = KEY_VOLUMEUP,
+ [ 0x10 ] = KEY_VOLUMEDOWN,
+ [ 0x11 ] = KEY_TUNER, // AV
+ [ 0x12 ] = KEY_NUMLOCK, // -/--
+ [ 0x13 ] = KEY_AUDIO, // audio
+ [ 0x14 ] = KEY_MUTE,
+ [ 0x15 ] = KEY_UP,
+ [ 0x16 ] = KEY_DOWN,
+ [ 0x17 ] = KEY_LEFT,
+ [ 0x18 ] = KEY_RIGHT,
+ [ 0x19 ] = BTN_LEFT,
+ [ 0x1a ] = BTN_RIGHT,
+ [ 0x1b ] = KEY_WWW, // text
+ [ 0x1c ] = KEY_REWIND,
+ [ 0x1d ] = KEY_FORWARD,
+ [ 0x1e ] = KEY_RECORD,
+ [ 0x1f ] = KEY_PLAY,
+ [ 0x20 ] = KEY_PREVIOUSSONG,
+ [ 0x21 ] = KEY_NEXTSONG,
+ [ 0x22 ] = KEY_PAUSE,
+ [ 0x23 ] = KEY_STOP,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_cinergy);
+
+/* Alfons Geser
+ * updates from Job D. R. Borges */
+IR_KEYTAB_TYPE ir_codes_eztv[IR_KEYTAB_SIZE] = {
+ [ 0x12 ] = KEY_POWER,
+ [ 0x01 ] = KEY_TV, // DVR
+ [ 0x15 ] = KEY_DVD, // DVD
+ [ 0x17 ] = KEY_AUDIO, // music
+ // DVR mode / DVD mode / music mode
+
+ [ 0x1b ] = KEY_MUTE, // mute
+ [ 0x02 ] = KEY_LANGUAGE, // MTS/SAP / audio / autoseek
+ [ 0x1e ] = KEY_SUBTITLE, // closed captioning / subtitle / seek
+ [ 0x16 ] = KEY_ZOOM, // full screen
+ [ 0x1c ] = KEY_VIDEO, // video source / eject / delall
+ [ 0x1d ] = KEY_RESTART, // playback / angle / del
+ [ 0x2f ] = KEY_SEARCH, // scan / menu / playlist
+ [ 0x30 ] = KEY_CHANNEL, // CH surfing / bookmark / memo
+
+ [ 0x31 ] = KEY_HELP, // help
+ [ 0x32 ] = KEY_MODE, // num/memo
+ [ 0x33 ] = KEY_ESC, // cancel
+
+ [ 0x0c ] = KEY_UP, // up
+ [ 0x10 ] = KEY_DOWN, // down
+ [ 0x08 ] = KEY_LEFT, // left
+ [ 0x04 ] = KEY_RIGHT, // right
+ [ 0x03 ] = KEY_SELECT, // select
+
+ [ 0x1f ] = KEY_REWIND, // rewind
+ [ 0x20 ] = KEY_PLAYPAUSE, // play/pause
+ [ 0x29 ] = KEY_FORWARD, // forward
+ [ 0x14 ] = KEY_AGAIN, // repeat
+ [ 0x2b ] = KEY_RECORD, // recording
+ [ 0x2c ] = KEY_STOP, // stop
+ [ 0x2d ] = KEY_PLAY, // play
+ [ 0x2e ] = KEY_SHUFFLE, // snapshot / shuffle
+
+ [ 0x00 ] = KEY_0,
+ [ 0x05 ] = KEY_1,
+ [ 0x06 ] = KEY_2,
+ [ 0x07 ] = KEY_3,
+ [ 0x09 ] = KEY_4,
+ [ 0x0a ] = KEY_5,
+ [ 0x0b ] = KEY_6,
+ [ 0x0d ] = KEY_7,
+ [ 0x0e ] = KEY_8,
+ [ 0x0f ] = KEY_9,
+
+ [ 0x2a ] = KEY_VOLUMEUP,
+ [ 0x11 ] = KEY_VOLUMEDOWN,
+ [ 0x18 ] = KEY_CHANNELUP, // CH.tracking up
+ [ 0x19 ] = KEY_CHANNELDOWN, // CH.tracking down
+
+ [ 0x13 ] = KEY_ENTER, // enter
+ [ 0x21 ] = KEY_DOT, // . (decimal dot)
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_eztv);
+
+/* Alex Hermann */
+IR_KEYTAB_TYPE ir_codes_avermedia[IR_KEYTAB_SIZE] = {
+ [ 0x28 ] = KEY_1,
+ [ 0x18 ] = KEY_2,
+ [ 0x38 ] = KEY_3,
+ [ 0x24 ] = KEY_4,
+ [ 0x14 ] = KEY_5,
+ [ 0x34 ] = KEY_6,
+ [ 0x2c ] = KEY_7,
+ [ 0x1c ] = KEY_8,
+ [ 0x3c ] = KEY_9,
+ [ 0x22 ] = KEY_0,
+
+ [ 0x20 ] = KEY_TV, /* TV/FM */
+ [ 0x10 ] = KEY_CD, /* CD */
+ [ 0x30 ] = KEY_TEXT, /* TELETEXT */
+ [ 0x00 ] = KEY_POWER, /* POWER */
+
+ [ 0x08 ] = KEY_VIDEO, /* VIDEO */
+ [ 0x04 ] = KEY_AUDIO, /* AUDIO */
+ [ 0x0c ] = KEY_ZOOM, /* FULL SCREEN */
+
+ [ 0x12 ] = KEY_SUBTITLE, /* DISPLAY */
+ [ 0x32 ] = KEY_REWIND, /* LOOP */
+ [ 0x02 ] = KEY_PRINT, /* PREVIEW */
+
+ [ 0x2a ] = KEY_SEARCH, /* AUTOSCAN */
+ [ 0x1a ] = KEY_SLEEP, /* FREEZE */
+ [ 0x3a ] = KEY_SHUFFLE, /* SNAPSHOT */
+ [ 0x0a ] = KEY_MUTE, /* MUTE */
+
+ [ 0x26 ] = KEY_RECORD, /* RECORD */
+ [ 0x16 ] = KEY_PAUSE, /* PAUSE */
+ [ 0x36 ] = KEY_STOP, /* STOP */
+ [ 0x06 ] = KEY_PLAY, /* PLAY */
+
+ [ 0x2e ] = KEY_RED, /* RED */
+ [ 0x21 ] = KEY_GREEN, /* GREEN */
+ [ 0x0e ] = KEY_YELLOW, /* YELLOW */
+ [ 0x01 ] = KEY_BLUE, /* BLUE */
+
+ [ 0x1e ] = KEY_VOLUMEDOWN, /* VOLUME- */
+ [ 0x3e ] = KEY_VOLUMEUP, /* VOLUME+ */
+ [ 0x11 ] = KEY_CHANNELDOWN, /* CHANNEL/PAGE- */
+ [ 0x31 ] = KEY_CHANNELUP /* CHANNEL/PAGE+ */
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_avermedia);
+
+IR_KEYTAB_TYPE ir_codes_videomate_tv_pvr[IR_KEYTAB_SIZE] = {
+ [ 0x14 ] = KEY_MUTE,
+ [ 0x24 ] = KEY_ZOOM,
+
+ [ 0x01 ] = KEY_DVD,
+ [ 0x23 ] = KEY_RADIO,
+ [ 0x00 ] = KEY_TV,
+
+ [ 0x0a ] = KEY_REWIND,
+ [ 0x08 ] = KEY_PLAYPAUSE,
+ [ 0x0f ] = KEY_FORWARD,
+
+ [ 0x02 ] = KEY_PREVIOUS,
+ [ 0x07 ] = KEY_STOP,
+ [ 0x06 ] = KEY_NEXT,
+
+ [ 0x0c ] = KEY_UP,
+ [ 0x0e ] = KEY_DOWN,
+ [ 0x0b ] = KEY_LEFT,
+ [ 0x0d ] = KEY_RIGHT,
+ [ 0x11 ] = KEY_OK,
+
+ [ 0x03 ] = KEY_MENU,
+ [ 0x09 ] = KEY_SETUP,
+ [ 0x05 ] = KEY_VIDEO,
+ [ 0x22 ] = KEY_CHANNEL,
+
+ [ 0x12 ] = KEY_VOLUMEUP,
+ [ 0x15 ] = KEY_VOLUMEDOWN,
+ [ 0x10 ] = KEY_CHANNELUP,
+ [ 0x13 ] = KEY_CHANNELDOWN,
+
+ [ 0x04 ] = KEY_RECORD,
+
+ [ 0x16 ] = KEY_1,
+ [ 0x17 ] = KEY_2,
+ [ 0x18 ] = KEY_3,
+ [ 0x19 ] = KEY_4,
+ [ 0x1a ] = KEY_5,
+ [ 0x1b ] = KEY_6,
+ [ 0x1c ] = KEY_7,
+ [ 0x1d ] = KEY_8,
+ [ 0x1e ] = KEY_9,
+ [ 0x1f ] = KEY_0,
+
+ [ 0x20 ] = KEY_LANGUAGE,
+ [ 0x21 ] = KEY_SLEEP,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_videomate_tv_pvr);
+
+/* Michael Tokarev
+ http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
+ keytable is used by MANLI MTV00[ 0x0c ] and BeholdTV 40[13] at
+ least, and probably other cards too.
+ The "ascii-art picture" below (in comments, first row
+ is the keycode in hex, and subsequent row(s) shows
+ the button labels (several variants when appropriate)
+ helps to descide which keycodes to assign to the buttons.
+ */
+IR_KEYTAB_TYPE ir_codes_manli[IR_KEYTAB_SIZE] = {
+
+ /* 0x1c 0x12 *
+ * FUNCTION POWER *
+ * FM (|) *
+ * */
+ [ 0x1c ] = KEY_RADIO, /*XXX*/
+ [ 0x12 ] = KEY_POWER,
+
+ /* 0x01 0x02 0x03 *
+ * 1 2 3 *
+ * *
+ * 0x04 0x05 0x06 *
+ * 4 5 6 *
+ * *
+ * 0x07 0x08 0x09 *
+ * 7 8 9 *
+ * */
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ /* 0x0a 0x00 0x17 *
+ * RECALL 0 +100 *
+ * PLUS *
+ * */
+ [ 0x0a ] = KEY_AGAIN, /*XXX KEY_REWIND? */
+ [ 0x00 ] = KEY_0,
+ [ 0x17 ] = KEY_DIGITS, /*XXX*/
+
+ /* 0x14 0x10 *
+ * MENU INFO *
+ * OSD */
+ [ 0x14 ] = KEY_MENU,
+ [ 0x10 ] = KEY_INFO,
+
+ /* 0x0b *
+ * Up *
+ * *
+ * 0x18 0x16 0x0c *
+ * Left Ok Right *
+ * *
+ * 0x015 *
+ * Down *
+ * */
+ [ 0x0b ] = KEY_UP, /*XXX KEY_SCROLLUP? */
+ [ 0x18 ] = KEY_LEFT, /*XXX KEY_BACK? */
+ [ 0x16 ] = KEY_OK, /*XXX KEY_SELECT? KEY_ENTER? */
+ [ 0x0c ] = KEY_RIGHT, /*XXX KEY_FORWARD? */
+ [ 0x15 ] = KEY_DOWN, /*XXX KEY_SCROLLDOWN? */
+
+ /* 0x11 0x0d *
+ * TV/AV MODE *
+ * SOURCE STEREO *
+ * */
+ [ 0x11 ] = KEY_TV, /*XXX*/
+ [ 0x0d ] = KEY_MODE, /*XXX there's no KEY_STEREO */
+
+ /* 0x0f 0x1b 0x1a *
+ * AUDIO Vol+ Chan+ *
+ * TIMESHIFT??? *
+ * *
+ * 0x0e 0x1f 0x1e *
+ * SLEEP Vol- Chan- *
+ * */
+ [ 0x0f ] = KEY_AUDIO,
+ [ 0x1b ] = KEY_VOLUMEUP,
+ [ 0x1a ] = KEY_CHANNELUP,
+ [ 0x0e ] = KEY_SLEEP, /*XXX maybe KEY_PAUSE */
+ [ 0x1f ] = KEY_VOLUMEDOWN,
+ [ 0x1e ] = KEY_CHANNELDOWN,
+
+ /* 0x13 0x19 *
+ * MUTE SNAPSHOT*
+ * */
+ [ 0x13 ] = KEY_MUTE,
+ [ 0x19 ] = KEY_RECORD, /*XXX*/
+
+ // 0x1d unused ?
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_manli);
+
+/* Mike Baikov */
+IR_KEYTAB_TYPE ir_codes_gotview7135[IR_KEYTAB_SIZE] = {
+
+ [ 0x21 ] = KEY_POWER,
+ [ 0x69 ] = KEY_TV,
+ [ 0x33 ] = KEY_0,
+ [ 0x51 ] = KEY_1,
+ [ 0x31 ] = KEY_2,
+ [ 0x71 ] = KEY_3,
+ [ 0x3b ] = KEY_4,
+ [ 0x58 ] = KEY_5,
+ [ 0x41 ] = KEY_6,
+ [ 0x48 ] = KEY_7,
+ [ 0x30 ] = KEY_8,
+ [ 0x53 ] = KEY_9,
+ [ 0x73 ] = KEY_AGAIN, /* LOOP */
+ [ 0x0a ] = KEY_AUDIO,
+ [ 0x61 ] = KEY_PRINT, /* PREVIEW */
+ [ 0x7a ] = KEY_VIDEO,
+ [ 0x20 ] = KEY_CHANNELUP,
+ [ 0x40 ] = KEY_CHANNELDOWN,
+ [ 0x18 ] = KEY_VOLUMEDOWN,
+ [ 0x50 ] = KEY_VOLUMEUP,
+ [ 0x10 ] = KEY_MUTE,
+ [ 0x4a ] = KEY_SEARCH,
+ [ 0x7b ] = KEY_SHUFFLE, /* SNAPSHOT */
+ [ 0x22 ] = KEY_RECORD,
+ [ 0x62 ] = KEY_STOP,
+ [ 0x78 ] = KEY_PLAY,
+ [ 0x39 ] = KEY_REWIND,
+ [ 0x59 ] = KEY_PAUSE,
+ [ 0x19 ] = KEY_FORWARD,
+ [ 0x09 ] = KEY_ZOOM,
+
+ [ 0x52 ] = KEY_F21, /* LIVE TIMESHIFT */
+ [ 0x1a ] = KEY_F22, /* MIN TIMESHIFT */
+ [ 0x3a ] = KEY_F23, /* TIMESHIFT */
+ [ 0x70 ] = KEY_F24, /* NORMAL TIMESHIFT */
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_gotview7135);
+
+IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = {
+ [ 0x03 ] = KEY_POWER,
+ [ 0x6f ] = KEY_MUTE,
+ [ 0x10 ] = KEY_BACKSPACE, /* Recall */
+
+ [ 0x11 ] = KEY_0,
+ [ 0x04 ] = KEY_1,
+ [ 0x05 ] = KEY_2,
+ [ 0x06 ] = KEY_3,
+ [ 0x08 ] = KEY_4,
+ [ 0x09 ] = KEY_5,
+ [ 0x0a ] = KEY_6,
+ [ 0x0c ] = KEY_7,
+ [ 0x0d ] = KEY_8,
+ [ 0x0e ] = KEY_9,
+ [ 0x12 ] = KEY_DOT, /* 100+ */
+
+ [ 0x07 ] = KEY_VOLUMEUP,
+ [ 0x0b ] = KEY_VOLUMEDOWN,
+ [ 0x1a ] = KEY_KPPLUS,
+ [ 0x18 ] = KEY_KPMINUS,
+ [ 0x15 ] = KEY_UP,
+ [ 0x1d ] = KEY_DOWN,
+ [ 0x0f ] = KEY_CHANNELUP,
+ [ 0x13 ] = KEY_CHANNELDOWN,
+ [ 0x48 ] = KEY_ZOOM,
+
+ [ 0x1b ] = KEY_VIDEO, /* Video source */
+ [ 0x49 ] = KEY_LANGUAGE, /* MTS Select */
+ [ 0x19 ] = KEY_SEARCH, /* Auto Scan */
+
+ [ 0x4b ] = KEY_RECORD,
+ [ 0x46 ] = KEY_PLAY,
+ [ 0x45 ] = KEY_PAUSE, /* Pause */
+ [ 0x44 ] = KEY_STOP,
+ [ 0x40 ] = KEY_FORWARD, /* Forward ? */
+ [ 0x42 ] = KEY_REWIND, /* Backward ? */
+
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_purpletv);
+
+/* Mapping for the 28 key remote control as seen at
+ http://www.sednacomputer.com/photo/cardbus-tv.jpg
+ Pavel Mihaylov */
+IR_KEYTAB_TYPE ir_codes_pctv_sedna[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ [ 0x0a ] = KEY_AGAIN, /* Recall */
+ [ 0x0b ] = KEY_CHANNELUP,
+ [ 0x0c ] = KEY_VOLUMEUP,
+ [ 0x0d ] = KEY_MODE, /* Stereo */
+ [ 0x0e ] = KEY_STOP,
+ [ 0x0f ] = KEY_PREVIOUSSONG,
+ [ 0x10 ] = KEY_ZOOM,
+ [ 0x11 ] = KEY_TUNER, /* Source */
+ [ 0x12 ] = KEY_POWER,
+ [ 0x13 ] = KEY_MUTE,
+ [ 0x15 ] = KEY_CHANNELDOWN,
+ [ 0x18 ] = KEY_VOLUMEDOWN,
+ [ 0x19 ] = KEY_SHUFFLE, /* Snapshot */
+ [ 0x1a ] = KEY_NEXTSONG,
+ [ 0x1b ] = KEY_TEXT, /* Time Shift */
+ [ 0x1c ] = KEY_RADIO, /* FM Radio */
+ [ 0x1d ] = KEY_RECORD,
+ [ 0x1e ] = KEY_PAUSE,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_pctv_sedna);
+
+/* Mark Phalan */
+IR_KEYTAB_TYPE ir_codes_pv951[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ [ 0x12 ] = KEY_POWER,
+ [ 0x10 ] = KEY_MUTE,
+ [ 0x1f ] = KEY_VOLUMEDOWN,
+ [ 0x1b ] = KEY_VOLUMEUP,
+ [ 0x1a ] = KEY_CHANNELUP,
+ [ 0x1e ] = KEY_CHANNELDOWN,
+ [ 0x0e ] = KEY_PAGEUP,
+ [ 0x1d ] = KEY_PAGEDOWN,
+ [ 0x13 ] = KEY_SOUND,
+
+ [ 0x18 ] = KEY_KPPLUSMINUS, /* CH +/- */
+ [ 0x16 ] = KEY_SUBTITLE, /* CC */
+ [ 0x0d ] = KEY_TEXT, /* TTX */
+ [ 0x0b ] = KEY_TV, /* AIR/CBL */
+ [ 0x11 ] = KEY_PC, /* PC/TV */
+ [ 0x17 ] = KEY_OK, /* CH RTN */
+ [ 0x19 ] = KEY_MODE, /* FUNC */
+ [ 0x0c ] = KEY_SEARCH, /* AUTOSCAN */
+
+ /* Not sure what to do with these ones! */
+ [ 0x0f ] = KEY_SELECT, /* SOURCE */
+ [ 0x0a ] = KEY_KPPLUS, /* +100 */
+ [ 0x14 ] = KEY_EQUAL, /* SYNC */
+ [ 0x1c ] = KEY_MEDIA, /* PC/TV */
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_pv951);
+
+/* generic RC5 keytable */
+/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
+/* used by old (black) Hauppauge remotes */
+IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE] = {
+ /* Keys 0 to 9 */
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ [ 0x0b ] = KEY_CHANNEL, /* channel / program (japan: 11) */
+ [ 0x0c ] = KEY_POWER, /* standby */
+ [ 0x0d ] = KEY_MUTE, /* mute / demute */
+ [ 0x0f ] = KEY_TV, /* display */
+ [ 0x10 ] = KEY_VOLUMEUP,
+ [ 0x11 ] = KEY_VOLUMEDOWN,
+ [ 0x12 ] = KEY_BRIGHTNESSUP,
+ [ 0x13 ] = KEY_BRIGHTNESSDOWN,
+ [ 0x1e ] = KEY_SEARCH, /* search + */
+ [ 0x20 ] = KEY_CHANNELUP, /* channel / program + */
+ [ 0x21 ] = KEY_CHANNELDOWN, /* channel / program - */
+ [ 0x22 ] = KEY_CHANNEL, /* alt / channel */
+ [ 0x23 ] = KEY_LANGUAGE, /* 1st / 2nd language */
+ [ 0x26 ] = KEY_SLEEP, /* sleeptimer */
+ [ 0x2e ] = KEY_MENU, /* 2nd controls (USA: menu) */
+ [ 0x30 ] = KEY_PAUSE,
+ [ 0x32 ] = KEY_REWIND,
+ [ 0x33 ] = KEY_GOTO,
+ [ 0x35 ] = KEY_PLAY,
+ [ 0x36 ] = KEY_STOP,
+ [ 0x37 ] = KEY_RECORD, /* recording */
+ [ 0x3c ] = KEY_TEXT, /* teletext submode (Japan: 12) */
+ [ 0x3d ] = KEY_SUSPEND, /* system standby */
+
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_rc5_tv);
+
+/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
+IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = {
+ /* Keys 0 to 9 */
+ [ 0x12 ] = KEY_0,
+ [ 0x05 ] = KEY_1,
+ [ 0x06 ] = KEY_2,
+ [ 0x07 ] = KEY_3,
+ [ 0x09 ] = KEY_4,
+ [ 0x0a ] = KEY_5,
+ [ 0x0b ] = KEY_6,
+ [ 0x0d ] = KEY_7,
+ [ 0x0e ] = KEY_8,
+ [ 0x0f ] = KEY_9,
+
+ [ 0x00 ] = KEY_POWER,
+ [ 0x02 ] = KEY_TUNER, /* TV/FM */
+ [ 0x1e ] = KEY_VIDEO,
+ [ 0x04 ] = KEY_VOLUMEUP,
+ [ 0x08 ] = KEY_VOLUMEDOWN,
+ [ 0x0c ] = KEY_CHANNELUP,
+ [ 0x10 ] = KEY_CHANNELDOWN,
+ [ 0x03 ] = KEY_ZOOM, /* fullscreen */
+ [ 0x1f ] = KEY_SUBTITLE, /* closed caption/teletext */
+ [ 0x20 ] = KEY_SLEEP,
+ [ 0x14 ] = KEY_MUTE,
+ [ 0x2b ] = KEY_RED,
+ [ 0x2c ] = KEY_GREEN,
+ [ 0x2d ] = KEY_YELLOW,
+ [ 0x2e ] = KEY_BLUE,
+ [ 0x18 ] = KEY_KPPLUS, /* fine tune + */
+ [ 0x19 ] = KEY_KPMINUS, /* fine tune - */
+ [ 0x21 ] = KEY_DOT,
+ [ 0x13 ] = KEY_ENTER,
+ [ 0x22 ] = KEY_BACK,
+ [ 0x23 ] = KEY_PLAYPAUSE,
+ [ 0x24 ] = KEY_NEXT,
+ [ 0x26 ] = KEY_STOP,
+ [ 0x27 ] = KEY_RECORD
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_winfast);
+
+IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE] = {
+ [ 0x59 ] = KEY_MUTE,
+ [ 0x4a ] = KEY_POWER,
+
+ [ 0x18 ] = KEY_TEXT,
+ [ 0x26 ] = KEY_TV,
+ [ 0x3d ] = KEY_PRINT,
+
+ [ 0x48 ] = KEY_RED,
+ [ 0x04 ] = KEY_GREEN,
+ [ 0x11 ] = KEY_YELLOW,
+ [ 0x00 ] = KEY_BLUE,
+
+ [ 0x2d ] = KEY_VOLUMEUP,
+ [ 0x1e ] = KEY_VOLUMEDOWN,
+
+ [ 0x49 ] = KEY_MENU,
+
+ [ 0x16 ] = KEY_CHANNELUP,
+ [ 0x17 ] = KEY_CHANNELDOWN,
+
+ [ 0x20 ] = KEY_UP,
+ [ 0x21 ] = KEY_DOWN,
+ [ 0x22 ] = KEY_LEFT,
+ [ 0x23 ] = KEY_RIGHT,
+ [ 0x0d ] = KEY_SELECT,
+
+
+
+ [ 0x08 ] = KEY_BACK,
+ [ 0x07 ] = KEY_REFRESH,
+
+ [ 0x2f ] = KEY_ZOOM,
+ [ 0x29 ] = KEY_RECORD,
+
+ [ 0x4b ] = KEY_PAUSE,
+ [ 0x4d ] = KEY_REWIND,
+ [ 0x2e ] = KEY_PLAY,
+ [ 0x4e ] = KEY_FORWARD,
+ [ 0x53 ] = KEY_PREVIOUS,
+ [ 0x4c ] = KEY_STOP,
+ [ 0x54 ] = KEY_NEXT,
+
+ [ 0x69 ] = KEY_0,
+ [ 0x6a ] = KEY_1,
+ [ 0x6b ] = KEY_2,
+ [ 0x6c ] = KEY_3,
+ [ 0x6d ] = KEY_4,
+ [ 0x6e ] = KEY_5,
+ [ 0x6f ] = KEY_6,
+ [ 0x70 ] = KEY_7,
+ [ 0x71 ] = KEY_8,
+ [ 0x72 ] = KEY_9,
+
+ [ 0x74 ] = KEY_CHANNEL,
+ [ 0x0a ] = KEY_BACKSPACE,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_pinnacle);
+
+/* Hauppauge: the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ * almost rc5 coding, but some non-standard keys */
+IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE] = {
+ /* Keys 0 to 9 */
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+
+ [ 0x0a ] = KEY_TEXT, /* keypad asterisk as well */
+ [ 0x0b ] = KEY_RED, /* red button */
+ [ 0x0c ] = KEY_RADIO,
+ [ 0x0d ] = KEY_MENU,
+ [ 0x0e ] = KEY_SUBTITLE, /* also the # key */
+ [ 0x0f ] = KEY_MUTE,
+ [ 0x10 ] = KEY_VOLUMEUP,
+ [ 0x11 ] = KEY_VOLUMEDOWN,
+ [ 0x12 ] = KEY_PREVIOUS, /* previous channel */
+ [ 0x14 ] = KEY_UP,
+ [ 0x15 ] = KEY_DOWN,
+ [ 0x16 ] = KEY_LEFT,
+ [ 0x17 ] = KEY_RIGHT,
+ [ 0x18 ] = KEY_VIDEO, /* Videos */
+ [ 0x19 ] = KEY_AUDIO, /* Music */
+ /* 0x1a: Pictures - presume this means
+ "Multimedia Home Platform" -
+ no "PICTURES" key in input.h
+ */
+ [ 0x1a ] = KEY_MHP,
+
+ [ 0x1b ] = KEY_EPG, /* Guide */
+ [ 0x1c ] = KEY_TV,
+ [ 0x1e ] = KEY_NEXTSONG, /* skip >| */
+ [ 0x1f ] = KEY_EXIT, /* back/exit */
+ [ 0x20 ] = KEY_CHANNELUP, /* channel / program + */
+ [ 0x21 ] = KEY_CHANNELDOWN, /* channel / program - */
+ [ 0x22 ] = KEY_CHANNEL, /* source (old black remote) */
+ [ 0x24 ] = KEY_PREVIOUSSONG, /* replay |< */
+ [ 0x25 ] = KEY_ENTER, /* OK */
+ [ 0x26 ] = KEY_SLEEP, /* minimize (old black remote) */
+ [ 0x29 ] = KEY_BLUE, /* blue key */
+ [ 0x2e ] = KEY_GREEN, /* green button */
+ [ 0x30 ] = KEY_PAUSE, /* pause */
+ [ 0x32 ] = KEY_REWIND, /* backward << */
+ [ 0x34 ] = KEY_FASTFORWARD, /* forward >> */
+ [ 0x35 ] = KEY_PLAY,
+ [ 0x36 ] = KEY_STOP,
+ [ 0x37 ] = KEY_RECORD, /* recording */
+ [ 0x38 ] = KEY_YELLOW, /* yellow key */
+ [ 0x3b ] = KEY_SELECT, /* top right button */
+ [ 0x3c ] = KEY_ZOOM, /* full */
+ [ 0x3d ] = KEY_POWER, /* system power (green button) */
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_hauppauge_new);
+
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 04c1938b9c91..8cdd4d265ffa 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -21,7 +21,7 @@
#include
LIST_HEAD(saa7146_devices);
-DECLARE_MUTEX(saa7146_devices_lock);
+DEFINE_MUTEX(saa7146_devices_lock);
static int saa7146_num;
@@ -116,8 +116,7 @@ static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
pg = vmalloc_to_page(virt);
if (NULL == pg)
goto err;
- if (PageHighMem(pg))
- BUG();
+ BUG_ON(PageHighMem(pg));
sglist[i].page = pg;
sglist[i].length = PAGE_SIZE;
}
@@ -402,11 +401,11 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
pci_set_drvdata(pci, dev);
- init_MUTEX(&dev->lock);
+ mutex_init(&dev->lock);
spin_lock_init(&dev->int_slock);
spin_lock_init(&dev->slock);
- init_MUTEX(&dev->i2c_lock);
+ mutex_init(&dev->i2c_lock);
dev->module = THIS_MODULE;
init_waitqueue_head(&dev->i2c_wq);
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index f8cf73ed49ad..3870fa948cc0 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -17,18 +17,18 @@ int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit)
}
/* is it free? */
- down(&dev->lock);
+ mutex_lock(&dev->lock);
if (vv->resources & bit) {
DEB_D(("locked! vv->resources:0x%02x, we want:0x%02x\n",vv->resources,bit));
/* no, someone else uses it */
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 0;
}
/* it's free, grab it */
fh->resources |= bit;
vv->resources |= bit;
DEB_D(("res: get 0x%02x, cur:0x%02x\n",bit,vv->resources));
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 1;
}
@@ -37,14 +37,13 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
struct saa7146_dev *dev = fh->dev;
struct saa7146_vv *vv = dev->vv_data;
- if ((fh->resources & bits) != bits)
- BUG();
+ BUG_ON((fh->resources & bits) != bits);
- down(&dev->lock);
+ mutex_lock(&dev->lock);
fh->resources &= ~bits;
vv->resources &= ~bits;
DEB_D(("res: put 0x%02x, cur:0x%02x\n",bits,vv->resources));
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
}
@@ -55,8 +54,7 @@ void saa7146_dma_free(struct saa7146_dev *dev,struct saa7146_buf *buf)
{
DEB_EE(("dev:%p, buf:%p\n",dev,buf));
- if (in_interrupt())
- BUG();
+ BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
videobuf_dma_pci_unmap(dev->pci, &buf->vb.dma);
@@ -204,7 +202,7 @@ static int fops_open(struct inode *inode, struct file *file)
DEB_EE(("inode:%p, file:%p, minor:%d\n",inode,file,minor));
- if (down_interruptible(&saa7146_devices_lock))
+ if (mutex_lock_interruptible(&saa7146_devices_lock))
return -ERESTARTSYS;
list_for_each(list,&saa7146_devices) {
@@ -276,7 +274,7 @@ out:
kfree(fh);
file->private_data = NULL;
}
- up(&saa7146_devices_lock);
+ mutex_unlock(&saa7146_devices_lock);
return result;
}
@@ -287,7 +285,7 @@ static int fops_release(struct inode *inode, struct file *file)
DEB_EE(("inode:%p, file:%p\n",inode,file));
- if (down_interruptible(&saa7146_devices_lock))
+ if (mutex_lock_interruptible(&saa7146_devices_lock))
return -ERESTARTSYS;
if( fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
@@ -303,7 +301,7 @@ static int fops_release(struct inode *inode, struct file *file)
file->private_data = NULL;
kfree(fh);
- up(&saa7146_devices_lock);
+ mutex_unlock(&saa7146_devices_lock);
return 0;
}
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 8aabdd8fb3c5..d9953f7a8b6b 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -279,7 +279,7 @@ int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, in
int address_err = 0;
int short_delay = 0;
- if (down_interruptible (&dev->i2c_lock))
+ if (mutex_lock_interruptible(&dev->i2c_lock))
return -ERESTARTSYS;
for(i=0;ii2c_lock);
+ mutex_unlock(&dev->i2c_lock);
return err;
}
diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c
index 468d3c959075..500bd3f05e16 100644
--- a/drivers/media/common/saa7146_vbi.c
+++ b/drivers/media/common/saa7146_vbi.c
@@ -410,7 +410,7 @@ static int vbi_open(struct saa7146_dev *dev, struct file *file)
V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
sizeof(struct saa7146_buf),
file);
- init_MUTEX(&fh->vbi_q.lock);
+ mutex_init(&fh->vbi_q.lock);
init_timer(&fh->vbi_read_timeout);
fh->vbi_read_timeout.function = vbi_read_timeout;
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 7ebac7949df3..6b42713d97f4 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -378,20 +378,20 @@ static int s_fmt(struct saa7146_fh *fh, struct v4l2_format *f)
err = try_win(dev,&f->fmt.win);
if (0 != err)
return err;
- down(&dev->lock);
+ mutex_lock(&dev->lock);
fh->ov.win = f->fmt.win;
fh->ov.nclips = f->fmt.win.clipcount;
if (fh->ov.nclips > 16)
fh->ov.nclips = 16;
if (copy_from_user(fh->ov.clips,f->fmt.win.clips,sizeof(struct v4l2_clip)*fh->ov.nclips)) {
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return -EFAULT;
}
/* fh->ov.fh is used to indicate that we have valid overlay informations, too */
fh->ov.fh = fh;
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
/* check if our current overlay is active */
if (IS_OVERLAY_ACTIVE(fh) != 0) {
@@ -516,7 +516,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
return -EINVAL;
}
- down(&dev->lock);
+ mutex_lock(&dev->lock);
switch (ctrl->type) {
case V4L2_CTRL_TYPE_BOOLEAN:
@@ -560,7 +560,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
/* fixme: we can support changing VFLIP and HFLIP here... */
if (IS_CAPTURE_ACTIVE(fh) != 0) {
DEB_D(("V4L2_CID_HFLIP while active capture.\n"));
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return -EINVAL;
}
vv->hflip = c->value;
@@ -568,7 +568,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
case V4L2_CID_VFLIP:
if (IS_CAPTURE_ACTIVE(fh) != 0) {
DEB_D(("V4L2_CID_VFLIP while active capture.\n"));
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return -EINVAL;
}
vv->vflip = c->value;
@@ -577,7 +577,7 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
return -EINVAL;
}
}
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
if (IS_OVERLAY_ACTIVE(fh) != 0) {
saa7146_stop_preview(fh);
@@ -939,7 +939,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
}
}
- down(&dev->lock);
+ mutex_lock(&dev->lock);
/* ok, accept it */
vv->ov_fb = *fb;
@@ -948,7 +948,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
vv->ov_fb.fmt.bytesperline =
vv->ov_fb.fmt.width*fmt->depth/8;
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 0;
}
@@ -1086,7 +1086,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
}
}
- down(&dev->lock);
+ mutex_lock(&dev->lock);
for(i = 0; i < dev->ext_vv_data->num_stds; i++)
if (*id & dev->ext_vv_data->stds[i].id)
@@ -1098,7 +1098,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
found = 1;
}
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
if (vv->ov_suspend != NULL) {
saa7146_start_preview(vv->ov_suspend);
@@ -1201,11 +1201,11 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
DEB_D(("VIDIOCGMBUF \n"));
q = &fh->video_q;
- down(&q->lock);
+ mutex_lock(&q->lock);
err = videobuf_mmap_setup(q,gbuffers,gbufsize,
V4L2_MEMORY_MMAP);
if (err < 0) {
- up(&q->lock);
+ mutex_unlock(&q->lock);
return err;
}
memset(mbuf,0,sizeof(*mbuf));
@@ -1213,7 +1213,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
mbuf->size = gbuffers * gbufsize;
for (i = 0; i < gbuffers; i++)
mbuf->offsets[i] = i * gbufsize;
- up(&q->lock);
+ mutex_unlock(&q->lock);
return 0;
}
default:
@@ -1414,7 +1414,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file)
sizeof(struct saa7146_buf),
file);
- init_MUTEX(&fh->video_q.lock);
+ mutex_init(&fh->video_q.lock);
return 0;
}
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index 7d7e1613c5a7..b3dd0603cd92 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -10,6 +10,7 @@
#include
#include
+#include
#include "flexcop-reg.h"
@@ -73,8 +74,7 @@ struct flexcop_device {
int (*fe_sleep) (struct dvb_frontend *);
struct i2c_adapter i2c_adap;
- struct semaphore i2c_sem;
-
+ struct mutex i2c_mutex;
struct module *owner;
/* options and status */
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index 56495cb6cd02..e0bd2d8f0f0c 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -135,7 +135,7 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs
struct flexcop_device *fc = i2c_get_adapdata(i2c_adap);
int i, ret = 0;
- if (down_interruptible(&fc->i2c_sem))
+ if (mutex_lock_interruptible(&fc->i2c_mutex))
return -ERESTARTSYS;
/* reading */
@@ -161,7 +161,7 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs
else
ret = num;
- up(&fc->i2c_sem);
+ mutex_unlock(&fc->i2c_mutex);
return ret;
}
@@ -180,7 +180,7 @@ int flexcop_i2c_init(struct flexcop_device *fc)
{
int ret;
- sema_init(&fc->i2c_sem,1);
+ mutex_init(&fc->i2c_mutex);
memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter));
strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",I2C_NAME_SIZE);
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index 356f447ee2ab..5500f8a0ffe2 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -344,7 +344,7 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
int retval;
retval = 0;
- if (down_interruptible (&bt->gpio_lock))
+ if (mutex_lock_interruptible(&bt->gpio_lock))
return -ERESTARTSYS;
/* special gpio signal */
switch (cmd) {
@@ -375,7 +375,7 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
retval = -EINVAL;
break;
}
- up(&bt->gpio_lock);
+ mutex_unlock(&bt->gpio_lock);
return retval;
}
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
index 9faf93770d08..f685bc129609 100644
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ b/drivers/media/dvb/bt8xx/bt878.h
@@ -25,6 +25,8 @@
#include
#include
#include
+#include
+
#include "bt848.h"
#include "bttv.h"
@@ -108,7 +110,7 @@ struct cards {
extern int bt878_num;
struct bt878 {
- struct semaphore gpio_lock;
+ struct mutex gpio_lock;
unsigned int nr;
unsigned int bttv_nr;
struct i2c_adapter *adapter;
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 0310e3dd07e6..1cfa5e5035d8 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -910,7 +910,7 @@ static int dst_get_device_id(struct dst_state *state)
static int dst_probe(struct dst_state *state)
{
- sema_init(&state->dst_mutex, 1);
+ mutex_init(&state->dst_mutex);
if ((rdc_8820_reset(state)) < 0) {
dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed.");
return -1;
@@ -962,7 +962,7 @@ int dst_command(struct dst_state *state, u8 *data, u8 len)
{
u8 reply;
- down(&state->dst_mutex);
+ mutex_lock(&state->dst_mutex);
if ((dst_comm_init(state)) < 0) {
dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization Failed.");
goto error;
@@ -1013,11 +1013,11 @@ int dst_command(struct dst_state *state, u8 *data, u8 len)
dprintk(verbose, DST_INFO, 1, "checksum failure");
goto error;
}
- up(&state->dst_mutex);
+ mutex_unlock(&state->dst_mutex);
return 0;
error:
- up(&state->dst_mutex);
+ mutex_unlock(&state->dst_mutex);
return -EIO;
}
@@ -1128,7 +1128,7 @@ static int dst_write_tuna(struct dvb_frontend *fe)
dst_set_voltage(fe, SEC_VOLTAGE_13);
}
state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
- down(&state->dst_mutex);
+ mutex_lock(&state->dst_mutex);
if ((dst_comm_init(state)) < 0) {
dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed.");
goto error;
@@ -1160,11 +1160,11 @@ static int dst_write_tuna(struct dvb_frontend *fe)
state->diseq_flags |= ATTEMPT_TUNE;
retval = dst_get_tuna(state);
werr:
- up(&state->dst_mutex);
+ mutex_unlock(&state->dst_mutex);
return retval;
error:
- up(&state->dst_mutex);
+ mutex_unlock(&state->dst_mutex);
return -EIO;
}
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index c650b4bf7f5f..f6b49a801eba 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -81,7 +81,7 @@ static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8
{
u8 reply;
- down(&state->dst_mutex);
+ mutex_lock(&state->dst_mutex);
dst_comm_init(state);
msleep(65);
@@ -110,11 +110,11 @@ static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8
goto error;
}
}
- up(&state->dst_mutex);
+ mutex_unlock(&state->dst_mutex);
return 0;
error:
- up(&state->dst_mutex);
+ mutex_unlock(&state->dst_mutex);
return -EIO;
}
diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h
index 81557f38fe38..51d4e043716c 100644
--- a/drivers/media/dvb/bt8xx/dst_common.h
+++ b/drivers/media/dvb/bt8xx/dst_common.h
@@ -25,6 +25,7 @@
#include
#include
#include
+#include
#include "bt878.h"
#include "dst_ca.h"
@@ -121,7 +122,7 @@ struct dst_state {
u8 vendor[8];
u8 board_info[8];
- struct semaphore dst_mutex;
+ struct mutex dst_mutex;
};
struct dst_types {
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index ea27b15007e9..baa8227ef87c 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -76,13 +76,13 @@ static int dvb_bt8xx_start_feed(struct dvb_demux_feed *dvbdmxfeed)
if (!dvbdmx->dmx.frontend)
return -EINVAL;
- down(&card->lock);
+ mutex_lock(&card->lock);
card->nfeeds++;
rc = card->nfeeds;
if (card->nfeeds == 1)
bt878_start(card->bt, card->gpio_mode,
card->op_sync_orin, card->irq_err_ignore);
- up(&card->lock);
+ mutex_unlock(&card->lock);
return rc;
}
@@ -96,11 +96,11 @@ static int dvb_bt8xx_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
if (!dvbdmx->dmx.frontend)
return -EINVAL;
- down(&card->lock);
+ mutex_lock(&card->lock);
card->nfeeds--;
if (card->nfeeds == 0)
bt878_stop(card->bt);
- up(&card->lock);
+ mutex_unlock(&card->lock);
return 0;
}
@@ -239,6 +239,20 @@ static int cx24108_pll_set(struct dvb_frontend* fe, struct dvb_frontend_paramete
static int pinnsat_pll_init(struct dvb_frontend* fe)
{
+ struct dvb_bt8xx_card *card = fe->dvb->priv;
+
+ bttv_gpio_enable(card->bttv_nr, 1, 1); /* output */
+ bttv_write_gpio(card->bttv_nr, 1, 1); /* relay on */
+
+ return 0;
+}
+
+static int pinnsat_pll_sleep(struct dvb_frontend* fe)
+{
+ struct dvb_bt8xx_card *card = fe->dvb->priv;
+
+ bttv_write_gpio(card->bttv_nr, 1, 0); /* relay off */
+
return 0;
}
@@ -246,6 +260,7 @@ static struct cx24110_config pctvsat_config = {
.demod_address = 0x55,
.pll_init = pinnsat_pll_init,
.pll_set = cx24108_pll_set,
+ .pll_sleep = pinnsat_pll_sleep,
};
static int microtune_mt7202dtf_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
@@ -788,7 +803,7 @@ static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
if (!(card = kzalloc(sizeof(struct dvb_bt8xx_card), GFP_KERNEL)))
return -ENOMEM;
- init_MUTEX(&card->lock);
+ mutex_init(&card->lock);
card->bttv_nr = sub->core->nr;
strncpy(card->card_name, sub->core->name, sizeof(sub->core->name));
card->i2c_adapter = &sub->core->i2c_adap;
@@ -798,14 +813,14 @@ static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
card->gpio_mode = 0x0400c060;
/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
- card->op_sync_orin = 0;
- card->irq_err_ignore = 0;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
break;
case BTTV_BOARD_DVICO_DVBT_LITE:
card->gpio_mode = 0x0400C060;
- card->op_sync_orin = 0;
- card->irq_err_ignore = 0;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
/* 26, 15, 14, 6, 5
* A_PWRDN DA_DPM DA_SBR DA_IOM_DA
* DA_APP(parallel) */
@@ -820,15 +835,15 @@ static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
case BTTV_BOARD_NEBULA_DIGITV:
case BTTV_BOARD_AVDVBT_761:
card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
- card->op_sync_orin = 0;
- card->irq_err_ignore = 0;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
/* A_PWRDN DA_SBR DA_APP (high speed serial) */
break;
case BTTV_BOARD_AVDVBT_771: //case 0x07711461:
card->gpio_mode = 0x0400402B;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
- card->irq_err_ignore = 0;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
/* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
break;
@@ -852,8 +867,8 @@ static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
case BTTV_BOARD_PC_HDTV:
card->gpio_mode = 0x0100EC7B;
- card->op_sync_orin = 0;
- card->irq_err_ignore = 0;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
break;
default:
@@ -881,7 +896,7 @@ static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
return -EFAULT;
}
- init_MUTEX(&card->bt->gpio_lock);
+ mutex_init(&card->bt->gpio_lock);
card->bt->bttv_nr = sub->core->nr;
if ( (ret = dvb_bt8xx_load_card(card, sub->core->type)) ) {
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
index cf035a80361c..00dd9fa54c82 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
@@ -26,6 +26,7 @@
#define DVB_BT8XX_H
#include
+#include
#include "dvbdev.h"
#include "dvb_net.h"
#include "bttv.h"
@@ -38,7 +39,7 @@
#include "lgdt330x.h"
struct dvb_bt8xx_card {
- struct semaphore lock;
+ struct mutex lock;
int nfeeds;
char card_name[32];
struct dvb_adapter dvb_adapter;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index c4b4c5b6b7c8..71b575dc22bd 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -30,6 +30,7 @@
#include
#include
#include
+#include
#include "dmxdev.h"
#include "dvb_demux.h"
@@ -116,7 +117,7 @@ static struct dvb_frontend_info cinergyt2_fe_info = {
struct cinergyt2 {
struct dvb_demux demux;
struct usb_device *udev;
- struct semaphore sem;
+ struct mutex sem;
struct dvb_adapter adapter;
struct dvb_device *fedev;
struct dmxdev dmxdev;
@@ -345,14 +346,14 @@ static int cinergyt2_start_feed(struct dvb_demux_feed *dvbdmxfeed)
struct dvb_demux *demux = dvbdmxfeed->demux;
struct cinergyt2 *cinergyt2 = demux->priv;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
if (cinergyt2->streaming == 0)
cinergyt2_start_stream_xfer(cinergyt2);
cinergyt2->streaming++;
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return 0;
}
@@ -361,13 +362,13 @@ static int cinergyt2_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
struct dvb_demux *demux = dvbdmxfeed->demux;
struct cinergyt2 *cinergyt2 = demux->priv;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
if (--cinergyt2->streaming == 0)
cinergyt2_stop_stream_xfer(cinergyt2);
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return 0;
}
@@ -483,11 +484,11 @@ static int cinergyt2_open (struct inode *inode, struct file *file)
struct cinergyt2 *cinergyt2 = dvbdev->priv;
int err = -ERESTARTSYS;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
if ((err = dvb_generic_open(inode, file))) {
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return err;
}
@@ -499,12 +500,15 @@ static int cinergyt2_open (struct inode *inode, struct file *file)
atomic_inc(&cinergyt2->inuse);
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return 0;
}
static void cinergyt2_unregister(struct cinergyt2 *cinergyt2)
{
+ dvb_net_release(&cinergyt2->dvbnet);
+ dvb_dmxdev_release(&cinergyt2->dmxdev);
+ dvb_dmx_release(&cinergyt2->demux);
dvb_unregister_device(cinergyt2->fedev);
dvb_unregister_adapter(&cinergyt2->adapter);
@@ -517,7 +521,7 @@ static int cinergyt2_release (struct inode *inode, struct file *file)
struct dvb_device *dvbdev = file->private_data;
struct cinergyt2 *cinergyt2 = dvbdev->priv;
- if (down_interruptible(&cinergyt2->sem))
+ if (mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
if (!cinergyt2->disconnect_pending && (file->f_flags & O_ACCMODE) != O_RDONLY) {
@@ -526,7 +530,7 @@ static int cinergyt2_release (struct inode *inode, struct file *file)
cinergyt2_sleep(cinergyt2, 1);
}
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
if (atomic_dec_and_test(&cinergyt2->inuse) && cinergyt2->disconnect_pending) {
warn("delayed unregister in release");
@@ -541,12 +545,12 @@ static unsigned int cinergyt2_poll (struct file *file, struct poll_table_struct
struct dvb_device *dvbdev = file->private_data;
struct cinergyt2 *cinergyt2 = dvbdev->priv;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
poll_wait(file, &cinergyt2->poll_wq, wait);
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return (POLLIN | POLLRDNORM | POLLPRI);
}
@@ -613,7 +617,7 @@ static int cinergyt2_ioctl (struct inode *inode, struct file *file,
if (copy_from_user(&p, (void __user*) arg, sizeof(p)))
return -EFAULT;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
@@ -629,7 +633,7 @@ static int cinergyt2_ioctl (struct inode *inode, struct file *file,
(char *) param, sizeof(*param),
NULL, 0);
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return (err < 0) ? err : 0;
}
@@ -724,7 +728,7 @@ static void cinergyt2_query_rc (void *data)
struct cinergyt2_rc_event rc_events[12];
int n, len, i;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return;
len = cinergyt2_command(cinergyt2, buf, sizeof(buf),
@@ -784,7 +788,7 @@ out:
schedule_delayed_work(&cinergyt2->rc_query_work,
msecs_to_jiffies(RC_QUERY_INTERVAL));
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
}
static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2)
@@ -849,7 +853,7 @@ static void cinergyt2_query (void *data)
uint8_t lock_bits;
uint32_t unc;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return;
unc = s->uncorrected_block_count;
@@ -868,7 +872,7 @@ static void cinergyt2_query (void *data)
schedule_delayed_work(&cinergyt2->query_work,
msecs_to_jiffies(QUERY_INTERVAL));
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
}
static int cinergyt2_probe (struct usb_interface *intf,
@@ -885,7 +889,7 @@ static int cinergyt2_probe (struct usb_interface *intf,
memset (cinergyt2, 0, sizeof (struct cinergyt2));
usb_set_intfdata (intf, (void *) cinergyt2);
- init_MUTEX(&cinergyt2->sem);
+ mutex_init(&cinergyt2->sem);
init_waitqueue_head (&cinergyt2->poll_wq);
INIT_WORK(&cinergyt2->query_work, cinergyt2_query, cinergyt2);
@@ -937,6 +941,7 @@ static int cinergyt2_probe (struct usb_interface *intf,
return 0;
bailout:
+ dvb_net_release(&cinergyt2->dvbnet);
dvb_dmxdev_release(&cinergyt2->dmxdev);
dvb_dmx_release(&cinergyt2->demux);
dvb_unregister_adapter(&cinergyt2->adapter);
@@ -967,7 +972,7 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state)
{
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
if (state.event > PM_EVENT_ON) {
@@ -981,7 +986,7 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state)
cinergyt2_sleep(cinergyt2, 1);
}
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return 0;
}
@@ -990,7 +995,7 @@ static int cinergyt2_resume (struct usb_interface *intf)
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
struct dvbt_set_parameters_msg *param = &cinergyt2->param;
- if (cinergyt2->disconnect_pending || down_interruptible(&cinergyt2->sem))
+ if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
if (!cinergyt2->sleeping) {
@@ -1003,7 +1008,7 @@ static int cinergyt2_resume (struct usb_interface *intf)
cinergyt2_resume_rc(cinergyt2);
- up(&cinergyt2->sem);
+ mutex_unlock(&cinergyt2->sem);
return 0;
}
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 7b8373ad121b..09e96e9ddbdf 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -1,9 +1,8 @@
/*
* dmxdev.c - DVB demultiplexer device
*
- * Copyright (C) 2000 Ralph Metzler
- * & Marcus Metzler
- for convergence integrated media GmbH
+ * Copyright (C) 2000 Ralph Metzler & Marcus Metzler
+ * for convergence integrated media GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
@@ -32,7 +31,6 @@
#include
#include
#include
-
#include "dmxdev.h"
static int debug;
@@ -42,177 +40,133 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
#define dprintk if (debug) printk
-static inline void dvb_dmxdev_buffer_init(struct dmxdev_buffer *buffer)
+static int dvb_dmxdev_buffer_write(struct dvb_ringbuffer *buf,
+ const u8 *src, size_t len)
{
- buffer->data=NULL;
- buffer->size=8192;
- buffer->pread=0;
- buffer->pwrite=0;
- buffer->error=0;
- init_waitqueue_head(&buffer->queue);
-}
-
-static inline int dvb_dmxdev_buffer_write(struct dmxdev_buffer *buf, const u8 *src, int len)
-{
- int split;
- int free;
- int todo;
+ ssize_t free;
if (!len)
return 0;
if (!buf->data)
return 0;
- free=buf->pread-buf->pwrite;
- split=0;
- if (free<=0) {
- free+=buf->size;
- split=buf->size-buf->pwrite;
- }
- if (len>=free) {
+ free = dvb_ringbuffer_free(buf);
+ if (len > free) {
dprintk("dmxdev: buffer overflow\n");
- return -1;
+ return -EOVERFLOW;
}
- if (split>=len)
- split=0;
- todo=len;
- if (split) {
- memcpy(buf->data + buf->pwrite, src, split);
- todo-=split;
- buf->pwrite=0;
- }
- memcpy(buf->data + buf->pwrite, src+split, todo);
- buf->pwrite=(buf->pwrite+todo)%buf->size;
- return len;
+
+ return dvb_ringbuffer_write(buf, src, len);
}
-static ssize_t dvb_dmxdev_buffer_read(struct dmxdev_buffer *src,
- int non_blocking, char __user *buf, size_t count, loff_t *ppos)
+static ssize_t dvb_dmxdev_buffer_read(struct dvb_ringbuffer *src,
+ int non_blocking, char __user *buf,
+ size_t count, loff_t *ppos)
{
- unsigned long todo=count;
- int split, avail, error;
+ size_t todo;
+ ssize_t avail;
+ ssize_t ret = 0;
if (!src->data)
return 0;
- if ((error=src->error)) {
- src->pwrite=src->pread;
- src->error=0;
- return error;
+ if (src->error) {
+ ret = src->error;
+ dvb_ringbuffer_flush(src);
+ return ret;
}
- if (non_blocking && (src->pwrite==src->pread))
- return -EWOULDBLOCK;
-
- while (todo>0) {
- if (non_blocking && (src->pwrite==src->pread))
- return (count-todo) ? (count-todo) : -EWOULDBLOCK;
-
- if (wait_event_interruptible(src->queue,
- (src->pread!=src->pwrite) ||
- (src->error))<0)
- return count-todo;
-
- if ((error=src->error)) {
- src->pwrite=src->pread;
- src->error=0;
- return error;
+ for (todo = count; todo > 0; todo -= ret) {
+ if (non_blocking && dvb_ringbuffer_empty(src)) {
+ ret = -EWOULDBLOCK;
+ break;
}
- split=src->size;
- avail=src->pwrite - src->pread;
- if (avail<0) {
- avail+=src->size;
- split=src->size - src->pread;
- }
- if (avail>todo)
- avail=todo;
- if (splitdata+src->pread, split))
- return -EFAULT;
- buf+=split;
- src->pread=0;
- todo-=split;
- avail-=split;
- }
- if (avail) {
- if (copy_to_user(buf, src->data+src->pread, avail))
- return -EFAULT;
- src->pread = (src->pread + avail) % src->size;
- todo-=avail;
- buf+=avail;
+ ret = wait_event_interruptible(src->queue,
+ !dvb_ringbuffer_empty(src) ||
+ (src->error != 0));
+ if (ret < 0)
+ break;
+
+ if (src->error) {
+ ret = src->error;
+ dvb_ringbuffer_flush(src);
+ break;
}
+
+ avail = dvb_ringbuffer_avail(src);
+ if (avail > todo)
+ avail = todo;
+
+ ret = dvb_ringbuffer_read(src, buf, avail, 1);
+ if (ret < 0)
+ break;
+
+ buf += ret;
}
- return count;
+
+ return (count - todo) ? (count - todo) : ret;
}
-static struct dmx_frontend * get_fe(struct dmx_demux *demux, int type)
+static struct dmx_frontend *get_fe(struct dmx_demux *demux, int type)
{
struct list_head *head, *pos;
- head=demux->get_frontends(demux);
+ head = demux->get_frontends(demux);
if (!head)
return NULL;
list_for_each(pos, head)
- if (DMX_FE_ENTRY(pos)->source==type)
+ if (DMX_FE_ENTRY(pos)->source == type)
return DMX_FE_ENTRY(pos);
return NULL;
}
-static inline void dvb_dmxdev_dvr_state_set(struct dmxdev_dvr *dmxdevdvr, int state)
-{
- spin_lock_irq(&dmxdevdvr->dev->lock);
- dmxdevdvr->state=state;
- spin_unlock_irq(&dmxdevdvr->dev->lock);
-}
-
static int dvb_dvr_open(struct inode *inode, struct file *file)
{
struct dvb_device *dvbdev = file->private_data;
struct dmxdev *dmxdev = dvbdev->priv;
struct dmx_frontend *front;
- dprintk ("function : %s\n", __FUNCTION__);
+ dprintk("function : %s\n", __FUNCTION__);
- if (down_interruptible (&dmxdev->mutex))
+ if (mutex_lock_interruptible(&dmxdev->mutex))
return -ERESTARTSYS;
- if ((file->f_flags&O_ACCMODE)==O_RDWR) {
- if (!(dmxdev->capabilities&DMXDEV_CAP_DUPLEX)) {
- up(&dmxdev->mutex);
+ if ((file->f_flags & O_ACCMODE) == O_RDWR) {
+ if (!(dmxdev->capabilities & DMXDEV_CAP_DUPLEX)) {
+ mutex_unlock(&dmxdev->mutex);
return -EOPNOTSUPP;
}
}
- if ((file->f_flags&O_ACCMODE)==O_RDONLY) {
- dvb_dmxdev_buffer_init(&dmxdev->dvr_buffer);
- dmxdev->dvr_buffer.size=DVR_BUFFER_SIZE;
- dmxdev->dvr_buffer.data=vmalloc(DVR_BUFFER_SIZE);
- if (!dmxdev->dvr_buffer.data) {
- up(&dmxdev->mutex);
- return -ENOMEM;
- }
+ if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
+ void *mem = vmalloc(DVR_BUFFER_SIZE);
+ if (!mem) {
+ mutex_unlock(&dmxdev->mutex);
+ return -ENOMEM;
+ }
+ dvb_ringbuffer_init(&dmxdev->dvr_buffer, mem, DVR_BUFFER_SIZE);
}
- if ((file->f_flags&O_ACCMODE)==O_WRONLY) {
- dmxdev->dvr_orig_fe=dmxdev->demux->frontend;
+ if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
+ dmxdev->dvr_orig_fe = dmxdev->demux->frontend;
if (!dmxdev->demux->write) {
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdev->mutex);
return -EOPNOTSUPP;
}
- front=get_fe(dmxdev->demux, DMX_MEMORY_FE);
+ front = get_fe(dmxdev->demux, DMX_MEMORY_FE);
if (!front) {
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdev->mutex);
return -EINVAL;
}
dmxdev->demux->disconnect_frontend(dmxdev->demux);
dmxdev->demux->connect_frontend(dmxdev->demux, front);
}
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdev->mutex);
return 0;
}
@@ -221,30 +175,30 @@ static int dvb_dvr_release(struct inode *inode, struct file *file)
struct dvb_device *dvbdev = file->private_data;
struct dmxdev *dmxdev = dvbdev->priv;
- if (down_interruptible (&dmxdev->mutex))
+ if (mutex_lock_interruptible(&dmxdev->mutex))
return -ERESTARTSYS;
- if ((file->f_flags&O_ACCMODE)==O_WRONLY) {
+ if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
dmxdev->demux->disconnect_frontend(dmxdev->demux);
dmxdev->demux->connect_frontend(dmxdev->demux,
dmxdev->dvr_orig_fe);
}
- if ((file->f_flags&O_ACCMODE)==O_RDONLY) {
+ if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
if (dmxdev->dvr_buffer.data) {
- void *mem=dmxdev->dvr_buffer.data;
+ void *mem = dmxdev->dvr_buffer.data;
mb();
spin_lock_irq(&dmxdev->lock);
- dmxdev->dvr_buffer.data=NULL;
+ dmxdev->dvr_buffer.data = NULL;
spin_unlock_irq(&dmxdev->lock);
vfree(mem);
}
}
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdev->mutex);
return 0;
}
static ssize_t dvb_dvr_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
+ size_t count, loff_t *ppos)
{
struct dvb_device *dvbdev = file->private_data;
struct dmxdev *dmxdev = dvbdev->priv;
@@ -252,60 +206,62 @@ static ssize_t dvb_dvr_write(struct file *file, const char __user *buf,
if (!dmxdev->demux->write)
return -EOPNOTSUPP;
- if ((file->f_flags&O_ACCMODE)!=O_WRONLY)
+ if ((file->f_flags & O_ACCMODE) != O_WRONLY)
return -EINVAL;
- if (down_interruptible (&dmxdev->mutex))
+ if (mutex_lock_interruptible(&dmxdev->mutex))
return -ERESTARTSYS;
- ret=dmxdev->demux->write(dmxdev->demux, buf, count);
- up(&dmxdev->mutex);
+ ret = dmxdev->demux->write(dmxdev->demux, buf, count);
+ mutex_unlock(&dmxdev->mutex);
return ret;
}
static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count,
- loff_t *ppos)
+ loff_t *ppos)
{
struct dvb_device *dvbdev = file->private_data;
struct dmxdev *dmxdev = dvbdev->priv;
int ret;
- //down(&dmxdev->mutex);
- ret= dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer,
- file->f_flags&O_NONBLOCK,
- buf, count, ppos);
- //up(&dmxdev->mutex);
+ //mutex_lock(&dmxdev->mutex);
+ ret = dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer,
+ file->f_flags & O_NONBLOCK,
+ buf, count, ppos);
+ //mutex_unlock(&dmxdev->mutex);
return ret;
}
-static inline void dvb_dmxdev_filter_state_set(struct dmxdev_filter *dmxdevfilter, int state)
+static inline void dvb_dmxdev_filter_state_set(struct dmxdev_filter
+ *dmxdevfilter, int state)
{
spin_lock_irq(&dmxdevfilter->dev->lock);
- dmxdevfilter->state=state;
+ dmxdevfilter->state = state;
spin_unlock_irq(&dmxdevfilter->dev->lock);
}
-static int dvb_dmxdev_set_buffer_size(struct dmxdev_filter *dmxdevfilter, unsigned long size)
+static int dvb_dmxdev_set_buffer_size(struct dmxdev_filter *dmxdevfilter,
+ unsigned long size)
{
- struct dmxdev_buffer *buf=&dmxdevfilter->buffer;
+ struct dvb_ringbuffer *buf = &dmxdevfilter->buffer;
void *mem;
- if (buf->size==size)
+ if (buf->size == size)
return 0;
- if (dmxdevfilter->state>=DMXDEV_STATE_GO)
+ if (dmxdevfilter->state >= DMXDEV_STATE_GO)
return -EBUSY;
spin_lock_irq(&dmxdevfilter->dev->lock);
- mem=buf->data;
- buf->data=NULL;
- buf->size=size;
- buf->pwrite=buf->pread=0;
+ mem = buf->data;
+ buf->data = NULL;
+ buf->size = size;
+ dvb_ringbuffer_flush(buf);
spin_unlock_irq(&dmxdevfilter->dev->lock);
vfree(mem);
if (buf->size) {
- mem=vmalloc(dmxdevfilter->buffer.size);
+ mem = vmalloc(dmxdevfilter->buffer.size);
if (!mem)
return -ENOMEM;
spin_lock_irq(&dmxdevfilter->dev->lock);
- buf->data=mem;
+ buf->data = mem;
spin_unlock_irq(&dmxdevfilter->dev->lock);
}
return 0;
@@ -313,31 +269,33 @@ static int dvb_dmxdev_set_buffer_size(struct dmxdev_filter *dmxdevfilter, unsign
static void dvb_dmxdev_filter_timeout(unsigned long data)
{
- struct dmxdev_filter *dmxdevfilter=(struct dmxdev_filter *)data;
+ struct dmxdev_filter *dmxdevfilter = (struct dmxdev_filter *)data;
- dmxdevfilter->buffer.error=-ETIMEDOUT;
+ dmxdevfilter->buffer.error = -ETIMEDOUT;
spin_lock_irq(&dmxdevfilter->dev->lock);
- dmxdevfilter->state=DMXDEV_STATE_TIMEDOUT;
+ dmxdevfilter->state = DMXDEV_STATE_TIMEDOUT;
spin_unlock_irq(&dmxdevfilter->dev->lock);
wake_up(&dmxdevfilter->buffer.queue);
}
static void dvb_dmxdev_filter_timer(struct dmxdev_filter *dmxdevfilter)
{
- struct dmx_sct_filter_params *para=&dmxdevfilter->params.sec;
+ struct dmx_sct_filter_params *para = &dmxdevfilter->params.sec;
del_timer(&dmxdevfilter->timer);
if (para->timeout) {
- dmxdevfilter->timer.function=dvb_dmxdev_filter_timeout;
- dmxdevfilter->timer.data=(unsigned long) dmxdevfilter;
- dmxdevfilter->timer.expires=jiffies+1+(HZ/2+HZ*para->timeout)/1000;
+ dmxdevfilter->timer.function = dvb_dmxdev_filter_timeout;
+ dmxdevfilter->timer.data = (unsigned long)dmxdevfilter;
+ dmxdevfilter->timer.expires =
+ jiffies + 1 + (HZ / 2 + HZ * para->timeout) / 1000;
add_timer(&dmxdevfilter->timer);
}
}
static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
- const u8 *buffer2, size_t buffer2_len,
- struct dmx_section_filter *filter, enum dmx_success success)
+ const u8 *buffer2, size_t buffer2_len,
+ struct dmx_section_filter *filter,
+ enum dmx_success success)
{
struct dmxdev_filter *dmxdevfilter = filter->priv;
int ret;
@@ -347,68 +305,68 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len,
return 0;
}
spin_lock(&dmxdevfilter->dev->lock);
- if (dmxdevfilter->state!=DMXDEV_STATE_GO) {
+ if (dmxdevfilter->state != DMXDEV_STATE_GO) {
spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
del_timer(&dmxdevfilter->timer);
dprintk("dmxdev: section callback %02x %02x %02x %02x %02x %02x\n",
buffer1[0], buffer1[1],
- buffer1[2], buffer1[3],
- buffer1[4], buffer1[5]);
- ret=dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer1, buffer1_len);
- if (ret==buffer1_len) {
- ret=dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer2, buffer2_len);
+ buffer1[2], buffer1[3], buffer1[4], buffer1[5]);
+ ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer1,
+ buffer1_len);
+ if (ret == buffer1_len) {
+ ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer2,
+ buffer2_len);
}
- if (ret<0) {
- dmxdevfilter->buffer.pwrite=dmxdevfilter->buffer.pread;
- dmxdevfilter->buffer.error=-EOVERFLOW;
+ if (ret < 0) {
+ dvb_ringbuffer_flush(&dmxdevfilter->buffer);
+ dmxdevfilter->buffer.error = ret;
}
- if (dmxdevfilter->params.sec.flags&DMX_ONESHOT)
- dmxdevfilter->state=DMXDEV_STATE_DONE;
+ if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
+ dmxdevfilter->state = DMXDEV_STATE_DONE;
spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len,
- const u8 *buffer2, size_t buffer2_len,
- struct dmx_ts_feed *feed, enum dmx_success success)
+ const u8 *buffer2, size_t buffer2_len,
+ struct dmx_ts_feed *feed,
+ enum dmx_success success)
{
struct dmxdev_filter *dmxdevfilter = feed->priv;
- struct dmxdev_buffer *buffer;
+ struct dvb_ringbuffer *buffer;
int ret;
spin_lock(&dmxdevfilter->dev->lock);
- if (dmxdevfilter->params.pes.output==DMX_OUT_DECODER) {
+ if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
- if (dmxdevfilter->params.pes.output==DMX_OUT_TAP)
- buffer=&dmxdevfilter->buffer;
+ if (dmxdevfilter->params.pes.output == DMX_OUT_TAP)
+ buffer = &dmxdevfilter->buffer;
else
- buffer=&dmxdevfilter->dev->dvr_buffer;
+ buffer = &dmxdevfilter->dev->dvr_buffer;
if (buffer->error) {
spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}
- ret=dvb_dmxdev_buffer_write(buffer, buffer1, buffer1_len);
- if (ret==buffer1_len)
- ret=dvb_dmxdev_buffer_write(buffer, buffer2, buffer2_len);
- if (ret<0) {
- buffer->pwrite=buffer->pread;
- buffer->error=-EOVERFLOW;
+ ret = dvb_dmxdev_buffer_write(buffer, buffer1, buffer1_len);
+ if (ret == buffer1_len)
+ ret = dvb_dmxdev_buffer_write(buffer, buffer2, buffer2_len);
+ if (ret < 0) {
+ dvb_ringbuffer_flush(buffer);
+ buffer->error = ret;
}
spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}
-
/* stop feed but only mark the specified filter as stopped (state set) */
-
static int dvb_dmxdev_feed_stop(struct dmxdev_filter *dmxdevfilter)
{
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
@@ -427,20 +385,16 @@ static int dvb_dmxdev_feed_stop(struct dmxdev_filter *dmxdevfilter)
return 0;
}
-
/* start feed associated with the specified filter */
-
static int dvb_dmxdev_feed_start(struct dmxdev_filter *filter)
{
- dvb_dmxdev_filter_state_set (filter, DMXDEV_STATE_GO);
+ dvb_dmxdev_filter_state_set(filter, DMXDEV_STATE_GO);
switch (filter->type) {
case DMXDEV_TYPE_SEC:
return filter->feed.sec->start_filtering(filter->feed.sec);
- break;
case DMXDEV_TYPE_PES:
return filter->feed.ts->start_filtering(filter->feed.ts);
- break;
default:
return -EINVAL;
}
@@ -448,32 +402,31 @@ static int dvb_dmxdev_feed_start(struct dmxdev_filter *filter)
return 0;
}
-
/* restart section feed if it has filters left associated with it,
otherwise release the feed */
-
static int dvb_dmxdev_feed_restart(struct dmxdev_filter *filter)
{
int i;
struct dmxdev *dmxdev = filter->dev;
u16 pid = filter->params.sec.pid;
- for (i=0; ifilternum; i++)
- if (dmxdev->filter[i].state>=DMXDEV_STATE_GO &&
- dmxdev->filter[i].type==DMXDEV_TYPE_SEC &&
- dmxdev->filter[i].pid==pid) {
+ for (i = 0; i < dmxdev->filternum; i++)
+ if (dmxdev->filter[i].state >= DMXDEV_STATE_GO &&
+ dmxdev->filter[i].type == DMXDEV_TYPE_SEC &&
+ dmxdev->filter[i].params.sec.pid == pid) {
dvb_dmxdev_feed_start(&dmxdev->filter[i]);
return 0;
}
- filter->dev->demux->release_section_feed(dmxdev->demux, filter->feed.sec);
+ filter->dev->demux->release_section_feed(dmxdev->demux,
+ filter->feed.sec);
return 0;
}
static int dvb_dmxdev_filter_stop(struct dmxdev_filter *dmxdevfilter)
{
- if (dmxdevfilter->statestate < DMXDEV_STATE_GO)
return 0;
switch (dmxdevfilter->type) {
@@ -483,36 +436,36 @@ static int dvb_dmxdev_filter_stop(struct dmxdev_filter *dmxdevfilter)
dvb_dmxdev_feed_stop(dmxdevfilter);
if (dmxdevfilter->filter.sec)
dmxdevfilter->feed.sec->
- release_filter(dmxdevfilter->feed.sec,
- dmxdevfilter->filter.sec);
+ release_filter(dmxdevfilter->feed.sec,
+ dmxdevfilter->filter.sec);
dvb_dmxdev_feed_restart(dmxdevfilter);
- dmxdevfilter->feed.sec=NULL;
+ dmxdevfilter->feed.sec = NULL;
break;
case DMXDEV_TYPE_PES:
if (!dmxdevfilter->feed.ts)
break;
dvb_dmxdev_feed_stop(dmxdevfilter);
dmxdevfilter->dev->demux->
- release_ts_feed(dmxdevfilter->dev->demux,
- dmxdevfilter->feed.ts);
- dmxdevfilter->feed.ts=NULL;
+ release_ts_feed(dmxdevfilter->dev->demux,
+ dmxdevfilter->feed.ts);
+ dmxdevfilter->feed.ts = NULL;
break;
default:
- if (dmxdevfilter->state==DMXDEV_STATE_ALLOCATED)
+ if (dmxdevfilter->state == DMXDEV_STATE_ALLOCATED)
return 0;
return -EINVAL;
}
- dmxdevfilter->buffer.pwrite=dmxdevfilter->buffer.pread=0;
+
+ dvb_ringbuffer_flush(&dmxdevfilter->buffer);
return 0;
}
static inline int dvb_dmxdev_filter_reset(struct dmxdev_filter *dmxdevfilter)
{
- if (dmxdevfilter->statestate < DMXDEV_STATE_SET)
return 0;
- dmxdevfilter->type=DMXDEV_TYPE_NONE;
- dmxdevfilter->pid=0xffff;
+ dmxdevfilter->type = DMXDEV_TYPE_NONE;
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED);
return 0;
}
@@ -529,32 +482,33 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
if (filter->state >= DMXDEV_STATE_GO)
dvb_dmxdev_filter_stop(filter);
- if (!(mem = filter->buffer.data)) {
+ if (!filter->buffer.data) {
mem = vmalloc(filter->buffer.size);
- spin_lock_irq(&filter->dev->lock);
- filter->buffer.data=mem;
- spin_unlock_irq(&filter->dev->lock);
- if (!filter->buffer.data)
+ if (!mem)
return -ENOMEM;
+ spin_lock_irq(&filter->dev->lock);
+ filter->buffer.data = mem;
+ spin_unlock_irq(&filter->dev->lock);
}
- filter->buffer.pwrite = filter->buffer.pread = 0;
+ dvb_ringbuffer_flush(&filter->buffer);
switch (filter->type) {
case DMXDEV_TYPE_SEC:
{
- struct dmx_sct_filter_params *para=&filter->params.sec;
- struct dmx_section_filter **secfilter=&filter->filter.sec;
- struct dmx_section_feed **secfeed=&filter->feed.sec;
+ struct dmx_sct_filter_params *para = &filter->params.sec;
+ struct dmx_section_filter **secfilter = &filter->filter.sec;
+ struct dmx_section_feed **secfeed = &filter->feed.sec;
+
+ *secfilter = NULL;
+ *secfeed = NULL;
- *secfilter=NULL;
- *secfeed=NULL;
/* find active filter/feed with same PID */
- for (i=0; ifilternum; i++) {
+ for (i = 0; i < dmxdev->filternum; i++) {
if (dmxdev->filter[i].state >= DMXDEV_STATE_GO &&
- dmxdev->filter[i].pid == para->pid &&
- dmxdev->filter[i].type == DMXDEV_TYPE_SEC) {
+ dmxdev->filter[i].type == DMXDEV_TYPE_SEC &&
+ dmxdev->filter[i].params.sec.pid == para->pid) {
*secfeed = dmxdev->filter[i].feed.sec;
break;
}
@@ -562,21 +516,20 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
/* if no feed found, try to allocate new one */
if (!*secfeed) {
- ret=dmxdev->demux->allocate_section_feed(dmxdev->demux,
- secfeed,
- dvb_dmxdev_section_callback);
- if (ret<0) {
- printk ("DVB (%s): could not alloc feed\n",
- __FUNCTION__);
+ ret = dmxdev->demux->allocate_section_feed(dmxdev->demux,
+ secfeed,
+ dvb_dmxdev_section_callback);
+ if (ret < 0) {
+ printk("DVB (%s): could not alloc feed\n",
+ __FUNCTION__);
return ret;
}
- ret=(*secfeed)->set(*secfeed, para->pid, 32768,
- (para->flags & DMX_CHECK_CRC) ? 1 : 0);
-
- if (ret<0) {
- printk ("DVB (%s): could not set feed\n",
- __FUNCTION__);
+ ret = (*secfeed)->set(*secfeed, para->pid, 32768,
+ (para->flags & DMX_CHECK_CRC) ? 1 : 0);
+ if (ret < 0) {
+ printk("DVB (%s): could not set feed\n",
+ __FUNCTION__);
dvb_dmxdev_feed_restart(filter);
return ret;
}
@@ -584,41 +537,38 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
dvb_dmxdev_feed_stop(filter);
}
- ret=(*secfeed)->allocate_filter(*secfeed, secfilter);
-
+ ret = (*secfeed)->allocate_filter(*secfeed, secfilter);
if (ret < 0) {
dvb_dmxdev_feed_restart(filter);
filter->feed.sec->start_filtering(*secfeed);
- dprintk ("could not get filter\n");
+ dprintk("could not get filter\n");
return ret;
}
(*secfilter)->priv = filter;
memcpy(&((*secfilter)->filter_value[3]),
- &(para->filter.filter[1]), DMX_FILTER_SIZE-1);
+ &(para->filter.filter[1]), DMX_FILTER_SIZE - 1);
memcpy(&(*secfilter)->filter_mask[3],
- ¶->filter.mask[1], DMX_FILTER_SIZE-1);
+ ¶->filter.mask[1], DMX_FILTER_SIZE - 1);
memcpy(&(*secfilter)->filter_mode[3],
- ¶->filter.mode[1], DMX_FILTER_SIZE-1);
+ ¶->filter.mode[1], DMX_FILTER_SIZE - 1);
- (*secfilter)->filter_value[0]=para->filter.filter[0];
- (*secfilter)->filter_mask[0]=para->filter.mask[0];
- (*secfilter)->filter_mode[0]=para->filter.mode[0];
- (*secfilter)->filter_mask[1]=0;
- (*secfilter)->filter_mask[2]=0;
+ (*secfilter)->filter_value[0] = para->filter.filter[0];
+ (*secfilter)->filter_mask[0] = para->filter.mask[0];
+ (*secfilter)->filter_mode[0] = para->filter.mode[0];
+ (*secfilter)->filter_mask[1] = 0;
+ (*secfilter)->filter_mask[2] = 0;
filter->todo = 0;
- ret = filter->feed.sec->start_filtering (filter->feed.sec);
-
+ ret = filter->feed.sec->start_filtering(filter->feed.sec);
if (ret < 0)
return ret;
dvb_dmxdev_filter_timer(filter);
break;
}
-
case DMXDEV_TYPE_PES:
{
struct timespec timeout = { 0 };
@@ -630,41 +580,41 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
struct dmx_ts_feed **tsfeed = &filter->feed.ts;
filter->feed.ts = NULL;
- otype=para->output;
+ otype = para->output;
- ts_pes=(enum dmx_ts_pes) para->pes_type;
+ ts_pes = (enum dmx_ts_pes)para->pes_type;
- if (ts_pesdemux->allocate_ts_feed(dmxdev->demux,
- tsfeed,
- dvb_dmxdev_ts_callback);
- if (ret<0)
+ ret = dmxdev->demux->allocate_ts_feed(dmxdev->demux,
+ tsfeed,
+ dvb_dmxdev_ts_callback);
+ if (ret < 0)
return ret;
- (*tsfeed)->priv = (void *) filter;
+ (*tsfeed)->priv = filter;
ret = (*tsfeed)->set(*tsfeed, para->pid, ts_type, ts_pes,
32768, timeout);
-
if (ret < 0) {
- dmxdev->demux->release_ts_feed(dmxdev->demux, *tsfeed);
+ dmxdev->demux->release_ts_feed(dmxdev->demux,
+ *tsfeed);
return ret;
}
ret = filter->feed.ts->start_filtering(filter->feed.ts);
-
if (ret < 0) {
- dmxdev->demux->release_ts_feed(dmxdev->demux, *tsfeed);
+ dmxdev->demux->release_ts_feed(dmxdev->demux,
+ *tsfeed);
return ret;
}
@@ -688,41 +638,40 @@ static int dvb_demux_open(struct inode *inode, struct file *file)
if (!dmxdev->filter)
return -EINVAL;
- if (down_interruptible(&dmxdev->mutex))
+ if (mutex_lock_interruptible(&dmxdev->mutex))
return -ERESTARTSYS;
- for (i=0; ifilternum; i++)
- if (dmxdev->filter[i].state==DMXDEV_STATE_FREE)
+ for (i = 0; i < dmxdev->filternum; i++)
+ if (dmxdev->filter[i].state == DMXDEV_STATE_FREE)
break;
- if (i==dmxdev->filternum) {
- up(&dmxdev->mutex);
+ if (i == dmxdev->filternum) {
+ mutex_unlock(&dmxdev->mutex);
return -EMFILE;
}
- dmxdevfilter=&dmxdev->filter[i];
- sema_init(&dmxdevfilter->mutex, 1);
- dmxdevfilter->dvbdev=dmxdev->dvbdev;
- file->private_data=dmxdevfilter;
+ dmxdevfilter = &dmxdev->filter[i];
+ mutex_init(&dmxdevfilter->mutex);
+ file->private_data = dmxdevfilter;
- dvb_dmxdev_buffer_init(&dmxdevfilter->buffer);
- dmxdevfilter->type=DMXDEV_TYPE_NONE;
+ dvb_ringbuffer_init(&dmxdevfilter->buffer, NULL, 8192);
+ dmxdevfilter->type = DMXDEV_TYPE_NONE;
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED);
- dmxdevfilter->feed.ts=NULL;
+ dmxdevfilter->feed.ts = NULL;
init_timer(&dmxdevfilter->timer);
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdev->mutex);
return 0;
}
-
-static int dvb_dmxdev_filter_free(struct dmxdev *dmxdev, struct dmxdev_filter *dmxdevfilter)
+static int dvb_dmxdev_filter_free(struct dmxdev *dmxdev,
+ struct dmxdev_filter *dmxdevfilter)
{
- if (down_interruptible(&dmxdev->mutex))
+ if (mutex_lock_interruptible(&dmxdev->mutex))
return -ERESTARTSYS;
- if (down_interruptible(&dmxdevfilter->mutex)) {
- up(&dmxdev->mutex);
+ if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
+ mutex_unlock(&dmxdev->mutex);
return -ERESTARTSYS;
}
@@ -730,18 +679,18 @@ static int dvb_dmxdev_filter_free(struct dmxdev *dmxdev, struct dmxdev_filter *d
dvb_dmxdev_filter_reset(dmxdevfilter);
if (dmxdevfilter->buffer.data) {
- void *mem=dmxdevfilter->buffer.data;
+ void *mem = dmxdevfilter->buffer.data;
spin_lock_irq(&dmxdev->lock);
- dmxdevfilter->buffer.data=NULL;
+ dmxdevfilter->buffer.data = NULL;
spin_unlock_irq(&dmxdev->lock);
vfree(mem);
}
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_FREE);
wake_up(&dmxdevfilter->buffer.queue);
- up(&dmxdevfilter->mutex);
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdevfilter->mutex);
+ mutex_unlock(&dmxdev->mutex);
return 0;
}
@@ -749,173 +698,171 @@ static inline void invert_mode(dmx_filter_t *filter)
{
int i;
- for (i=0; imode[i]^=0xff;
+ for (i = 0; i < DMX_FILTER_SIZE; i++)
+ filter->mode[i] ^= 0xff;
}
-
static int dvb_dmxdev_filter_set(struct dmxdev *dmxdev,
- struct dmxdev_filter *dmxdevfilter,
- struct dmx_sct_filter_params *params)
+ struct dmxdev_filter *dmxdevfilter,
+ struct dmx_sct_filter_params *params)
{
- dprintk ("function : %s\n", __FUNCTION__);
+ dprintk("function : %s\n", __FUNCTION__);
dvb_dmxdev_filter_stop(dmxdevfilter);
- dmxdevfilter->type=DMXDEV_TYPE_SEC;
- dmxdevfilter->pid=params->pid;
+ dmxdevfilter->type = DMXDEV_TYPE_SEC;
memcpy(&dmxdevfilter->params.sec,
params, sizeof(struct dmx_sct_filter_params));
invert_mode(&dmxdevfilter->params.sec.filter);
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
- if (params->flags&DMX_IMMEDIATE_START)
+ if (params->flags & DMX_IMMEDIATE_START)
return dvb_dmxdev_filter_start(dmxdevfilter);
return 0;
}
static int dvb_dmxdev_pes_filter_set(struct dmxdev *dmxdev,
- struct dmxdev_filter *dmxdevfilter,
- struct dmx_pes_filter_params *params)
+ struct dmxdev_filter *dmxdevfilter,
+ struct dmx_pes_filter_params *params)
{
dvb_dmxdev_filter_stop(dmxdevfilter);
- if (params->pes_type>DMX_PES_OTHER || params->pes_type<0)
+ if (params->pes_type > DMX_PES_OTHER || params->pes_type < 0)
return -EINVAL;
- dmxdevfilter->type=DMXDEV_TYPE_PES;
- dmxdevfilter->pid=params->pid;
- memcpy(&dmxdevfilter->params, params, sizeof(struct dmx_pes_filter_params));
+ dmxdevfilter->type = DMXDEV_TYPE_PES;
+ memcpy(&dmxdevfilter->params, params,
+ sizeof(struct dmx_pes_filter_params));
dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
- if (params->flags&DMX_IMMEDIATE_START)
+ if (params->flags & DMX_IMMEDIATE_START)
return dvb_dmxdev_filter_start(dmxdevfilter);
return 0;
}
static ssize_t dvb_dmxdev_read_sec(struct dmxdev_filter *dfil,
- struct file *file, char __user *buf, size_t count, loff_t *ppos)
+ struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
{
int result, hcount;
- int done=0;
+ int done = 0;
- if (dfil->todo<=0) {
- hcount=3+dfil->todo;
- if (hcount>count)
- hcount=count;
- result=dvb_dmxdev_buffer_read(&dfil->buffer, file->f_flags&O_NONBLOCK,
- buf, hcount, ppos);
- if (result<0) {
- dfil->todo=0;
+ if (dfil->todo <= 0) {
+ hcount = 3 + dfil->todo;
+ if (hcount > count)
+ hcount = count;
+ result = dvb_dmxdev_buffer_read(&dfil->buffer,
+ file->f_flags & O_NONBLOCK,
+ buf, hcount, ppos);
+ if (result < 0) {
+ dfil->todo = 0;
return result;
}
- if (copy_from_user(dfil->secheader-dfil->todo, buf, result))
+ if (copy_from_user(dfil->secheader - dfil->todo, buf, result))
return -EFAULT;
- buf+=result;
- done=result;
- count-=result;
- dfil->todo-=result;
- if (dfil->todo>-3)
+ buf += result;
+ done = result;
+ count -= result;
+ dfil->todo -= result;
+ if (dfil->todo > -3)
return done;
- dfil->todo=((dfil->secheader[1]<<8)|dfil->secheader[2])&0xfff;
+ dfil->todo = ((dfil->secheader[1] << 8) | dfil->secheader[2]) & 0xfff;
if (!count)
return done;
}
- if (count>dfil->todo)
- count=dfil->todo;
- result=dvb_dmxdev_buffer_read(&dfil->buffer, file->f_flags&O_NONBLOCK,
- buf, count, ppos);
- if (result<0)
+ if (count > dfil->todo)
+ count = dfil->todo;
+ result = dvb_dmxdev_buffer_read(&dfil->buffer,
+ file->f_flags & O_NONBLOCK,
+ buf, count, ppos);
+ if (result < 0)
return result;
- dfil->todo-=result;
- return (result+done);
+ dfil->todo -= result;
+ return (result + done);
}
-
static ssize_t
-dvb_demux_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+dvb_demux_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
{
- struct dmxdev_filter *dmxdevfilter= file->private_data;
- int ret=0;
+ struct dmxdev_filter *dmxdevfilter = file->private_data;
+ int ret;
- if (down_interruptible(&dmxdevfilter->mutex))
+ if (mutex_lock_interruptible(&dmxdevfilter->mutex))
return -ERESTARTSYS;
- if (dmxdevfilter->type==DMXDEV_TYPE_SEC)
- ret=dvb_dmxdev_read_sec(dmxdevfilter, file, buf, count, ppos);
+ if (dmxdevfilter->type == DMXDEV_TYPE_SEC)
+ ret = dvb_dmxdev_read_sec(dmxdevfilter, file, buf, count, ppos);
else
- ret=dvb_dmxdev_buffer_read(&dmxdevfilter->buffer,
- file->f_flags&O_NONBLOCK,
- buf, count, ppos);
+ ret = dvb_dmxdev_buffer_read(&dmxdevfilter->buffer,
+ file->f_flags & O_NONBLOCK,
+ buf, count, ppos);
- up(&dmxdevfilter->mutex);
+ mutex_unlock(&dmxdevfilter->mutex);
return ret;
}
-
static int dvb_demux_do_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *parg)
{
struct dmxdev_filter *dmxdevfilter = file->private_data;
- struct dmxdev *dmxdev=dmxdevfilter->dev;
- unsigned long arg=(unsigned long) parg;
- int ret=0;
+ struct dmxdev *dmxdev = dmxdevfilter->dev;
+ unsigned long arg = (unsigned long)parg;
+ int ret = 0;
- if (down_interruptible (&dmxdev->mutex))
+ if (mutex_lock_interruptible(&dmxdev->mutex))
return -ERESTARTSYS;
switch (cmd) {
case DMX_START:
- if (down_interruptible(&dmxdevfilter->mutex)) {
- up(&dmxdev->mutex);
+ if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
+ mutex_unlock(&dmxdev->mutex);
return -ERESTARTSYS;
}
- if (dmxdevfilter->statestate < DMXDEV_STATE_SET)
ret = -EINVAL;
else
ret = dvb_dmxdev_filter_start(dmxdevfilter);
- up(&dmxdevfilter->mutex);
+ mutex_unlock(&dmxdevfilter->mutex);
break;
case DMX_STOP:
- if (down_interruptible(&dmxdevfilter->mutex)) {
- up(&dmxdev->mutex);
+ if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
+ mutex_unlock(&dmxdev->mutex);
return -ERESTARTSYS;
}
- ret=dvb_dmxdev_filter_stop(dmxdevfilter);
- up(&dmxdevfilter->mutex);
+ ret = dvb_dmxdev_filter_stop(dmxdevfilter);
+ mutex_unlock(&dmxdevfilter->mutex);
break;
case DMX_SET_FILTER:
- if (down_interruptible(&dmxdevfilter->mutex)) {
- up(&dmxdev->mutex);
+ if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
+ mutex_unlock(&dmxdev->mutex);
return -ERESTARTSYS;
}
- ret = dvb_dmxdev_filter_set(dmxdev, dmxdevfilter,
- (struct dmx_sct_filter_params *)parg);
- up(&dmxdevfilter->mutex);
+ ret = dvb_dmxdev_filter_set(dmxdev, dmxdevfilter, parg);
+ mutex_unlock(&dmxdevfilter->mutex);
break;
case DMX_SET_PES_FILTER:
- if (down_interruptible(&dmxdevfilter->mutex)) {
- up(&dmxdev->mutex);
+ if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
+ mutex_unlock(&dmxdev->mutex);
return -ERESTARTSYS;
}
- ret=dvb_dmxdev_pes_filter_set(dmxdev, dmxdevfilter,
- (struct dmx_pes_filter_params *)parg);
- up(&dmxdevfilter->mutex);
+ ret = dvb_dmxdev_pes_filter_set(dmxdev, dmxdevfilter, parg);
+ mutex_unlock(&dmxdevfilter->mutex);
break;
case DMX_SET_BUFFER_SIZE:
- if (down_interruptible(&dmxdevfilter->mutex)) {
- up(&dmxdev->mutex);
+ if (mutex_lock_interruptible(&dmxdevfilter->mutex)) {
+ mutex_unlock(&dmxdev->mutex);
return -ERESTARTSYS;
}
- ret=dvb_dmxdev_set_buffer_size(dmxdevfilter, arg);
- up(&dmxdevfilter->mutex);
+ ret = dvb_dmxdev_set_buffer_size(dmxdevfilter, arg);
+ mutex_unlock(&dmxdevfilter->mutex);
break;
case DMX_GET_EVENT:
@@ -923,10 +870,10 @@ static int dvb_demux_do_ioctl(struct inode *inode, struct file *file,
case DMX_GET_PES_PIDS:
if (!dmxdev->demux->get_pes_pids) {
- ret=-EINVAL;
+ ret = -EINVAL;
break;
}
- dmxdev->demux->get_pes_pids(dmxdev->demux, (u16 *)parg);
+ dmxdev->demux->get_pes_pids(dmxdev->demux, parg);
break;
case DMX_GET_CAPS:
@@ -947,19 +894,20 @@ static int dvb_demux_do_ioctl(struct inode *inode, struct file *file,
case DMX_GET_STC:
if (!dmxdev->demux->get_stc) {
- ret=-EINVAL;
+ ret = -EINVAL;
break;
}
ret = dmxdev->demux->get_stc(dmxdev->demux,
- ((struct dmx_stc *)parg)->num,
- &((struct dmx_stc *)parg)->stc,
- &((struct dmx_stc *)parg)->base);
+ ((struct dmx_stc *)parg)->num,
+ &((struct dmx_stc *)parg)->stc,
+ &((struct dmx_stc *)parg)->base);
break;
default:
- ret=-EINVAL;
+ ret = -EINVAL;
+ break;
}
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdev->mutex);
return ret;
}
@@ -969,8 +917,7 @@ static int dvb_demux_ioctl(struct inode *inode, struct file *file,
return dvb_usercopy(inode, file, cmd, arg, dvb_demux_do_ioctl);
}
-
-static unsigned int dvb_demux_poll (struct file *file, poll_table *wait)
+static unsigned int dvb_demux_poll(struct file *file, poll_table *wait)
{
struct dmxdev_filter *dmxdevfilter = file->private_data;
unsigned int mask = 0;
@@ -988,13 +935,12 @@ static unsigned int dvb_demux_poll (struct file *file, poll_table *wait)
if (dmxdevfilter->buffer.error)
mask |= (POLLIN | POLLRDNORM | POLLPRI | POLLERR);
- if (dmxdevfilter->buffer.pread != dmxdevfilter->buffer.pwrite)
+ if (!dvb_ringbuffer_empty(&dmxdevfilter->buffer))
mask |= (POLLIN | POLLRDNORM | POLLPRI);
return mask;
}
-
static int dvb_demux_release(struct inode *inode, struct file *file)
{
struct dmxdev_filter *dmxdevfilter = file->private_data;
@@ -1003,72 +949,67 @@ static int dvb_demux_release(struct inode *inode, struct file *file)
return dvb_dmxdev_filter_free(dmxdev, dmxdevfilter);
}
-
static struct file_operations dvb_demux_fops = {
- .owner = THIS_MODULE,
- .read = dvb_demux_read,
- .ioctl = dvb_demux_ioctl,
- .open = dvb_demux_open,
- .release = dvb_demux_release,
- .poll = dvb_demux_poll,
+ .owner = THIS_MODULE,
+ .read = dvb_demux_read,
+ .ioctl = dvb_demux_ioctl,
+ .open = dvb_demux_open,
+ .release = dvb_demux_release,
+ .poll = dvb_demux_poll,
};
-
static struct dvb_device dvbdev_demux = {
- .priv = NULL,
- .users = 1,
- .writers = 1,
- .fops = &dvb_demux_fops
+ .priv = NULL,
+ .users = 1,
+ .writers = 1,
+ .fops = &dvb_demux_fops
};
-
static int dvb_dvr_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *parg)
+ unsigned int cmd, void *parg)
{
struct dvb_device *dvbdev = file->private_data;
struct dmxdev *dmxdev = dvbdev->priv;
+ int ret;
- int ret=0;
-
- if (down_interruptible (&dmxdev->mutex))
+ if (mutex_lock_interruptible(&dmxdev->mutex))
return -ERESTARTSYS;
switch (cmd) {
case DMX_SET_BUFFER_SIZE:
// FIXME: implement
- ret=0;
+ ret = 0;
break;
default:
- ret=-EINVAL;
+ ret = -EINVAL;
+ break;
}
- up(&dmxdev->mutex);
+ mutex_unlock(&dmxdev->mutex);
return ret;
}
-
static int dvb_dvr_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
return dvb_usercopy(inode, file, cmd, arg, dvb_dvr_do_ioctl);
}
-
-static unsigned int dvb_dvr_poll (struct file *file, poll_table *wait)
+static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait)
{
struct dvb_device *dvbdev = file->private_data;
struct dmxdev *dmxdev = dvbdev->priv;
unsigned int mask = 0;
- dprintk ("function : %s\n", __FUNCTION__);
+ dprintk("function : %s\n", __FUNCTION__);
poll_wait(file, &dmxdev->dvr_buffer.queue, wait);
- if ((file->f_flags&O_ACCMODE) == O_RDONLY) {
+ if ((file->f_flags & O_ACCMODE) == O_RDONLY) {
if (dmxdev->dvr_buffer.error)
mask |= (POLLIN | POLLRDNORM | POLLPRI | POLLERR);
- if (dmxdev->dvr_buffer.pread!=dmxdev->dvr_buffer.pwrite)
+ if (!dvb_ringbuffer_empty(&dmxdev->dvr_buffer))
mask |= (POLLIN | POLLRDNORM | POLLPRI);
} else
mask |= (POLLOUT | POLLWRNORM | POLLPRI);
@@ -1076,73 +1017,63 @@ static unsigned int dvb_dvr_poll (struct file *file, poll_table *wait)
return mask;
}
-
static struct file_operations dvb_dvr_fops = {
- .owner = THIS_MODULE,
- .read = dvb_dvr_read,
- .write = dvb_dvr_write,
- .ioctl = dvb_dvr_ioctl,
- .open = dvb_dvr_open,
- .release = dvb_dvr_release,
- .poll = dvb_dvr_poll,
+ .owner = THIS_MODULE,
+ .read = dvb_dvr_read,
+ .write = dvb_dvr_write,
+ .ioctl = dvb_dvr_ioctl,
+ .open = dvb_dvr_open,
+ .release = dvb_dvr_release,
+ .poll = dvb_dvr_poll,
};
static struct dvb_device dvbdev_dvr = {
- .priv = NULL,
- .users = 1,
- .writers = 1,
- .fops = &dvb_dvr_fops
+ .priv = NULL,
+ .users = 1,
+ .writers = 1,
+ .fops = &dvb_dvr_fops
};
-int
-dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
+int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
{
int i;
if (dmxdev->demux->open(dmxdev->demux) < 0)
return -EUSERS;
- dmxdev->filter = vmalloc(dmxdev->filternum*sizeof(struct dmxdev_filter));
+ dmxdev->filter = vmalloc(dmxdev->filternum * sizeof(struct dmxdev_filter));
if (!dmxdev->filter)
return -ENOMEM;
- dmxdev->dvr = vmalloc(dmxdev->filternum*sizeof(struct dmxdev_dvr));
- if (!dmxdev->dvr) {
- vfree(dmxdev->filter);
- dmxdev->filter = NULL;
- return -ENOMEM;
- }
-
- sema_init(&dmxdev->mutex, 1);
+ mutex_init(&dmxdev->mutex);
spin_lock_init(&dmxdev->lock);
- for (i=0; ifilternum; i++) {
- dmxdev->filter[i].dev=dmxdev;
- dmxdev->filter[i].buffer.data=NULL;
- dvb_dmxdev_filter_state_set(&dmxdev->filter[i], DMXDEV_STATE_FREE);
- dmxdev->dvr[i].dev=dmxdev;
- dmxdev->dvr[i].buffer.data=NULL;
- dvb_dmxdev_dvr_state_set(&dmxdev->dvr[i], DMXDEV_STATE_FREE);
+ for (i = 0; i < dmxdev->filternum; i++) {
+ dmxdev->filter[i].dev = dmxdev;
+ dmxdev->filter[i].buffer.data = NULL;
+ dvb_dmxdev_filter_state_set(&dmxdev->filter[i],
+ DMXDEV_STATE_FREE);
}
- dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev, DVB_DEVICE_DEMUX);
- dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr, dmxdev, DVB_DEVICE_DVR);
+ dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
+ DVB_DEVICE_DEMUX);
+ dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
+ dmxdev, DVB_DEVICE_DVR);
- dvb_dmxdev_buffer_init(&dmxdev->dvr_buffer);
+ dvb_ringbuffer_init(&dmxdev->dvr_buffer, NULL, 8192);
return 0;
}
+
EXPORT_SYMBOL(dvb_dmxdev_init);
-void
-dvb_dmxdev_release(struct dmxdev *dmxdev)
+void dvb_dmxdev_release(struct dmxdev *dmxdev)
{
dvb_unregister_device(dmxdev->dvbdev);
dvb_unregister_device(dmxdev->dvr_dvbdev);
vfree(dmxdev->filter);
- dmxdev->filter=NULL;
- vfree(dmxdev->dvr);
- dmxdev->dvr=NULL;
+ dmxdev->filter = NULL;
dmxdev->demux->close(dmxdev->demux);
}
+
EXPORT_SYMBOL(dvb_dmxdev_release);
diff --git a/drivers/media/dvb/dvb-core/dmxdev.h b/drivers/media/dvb/dvb-core/dmxdev.h
index fd72920c2199..d2bee9ffe43c 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.h
+++ b/drivers/media/dvb/dvb-core/dmxdev.h
@@ -30,14 +30,15 @@
#include
#include
#include
-#include
+#include
#include
#include "dvbdev.h"
#include "demux.h"
+#include "dvb_ringbuffer.h"
-enum dmxdevype {
+enum dmxdev_type {
DMXDEV_TYPE_NONE,
DMXDEV_TYPE_SEC,
DMXDEV_TYPE_PES,
@@ -52,18 +53,7 @@ enum dmxdev_state {
DMXDEV_STATE_TIMEDOUT
};
-struct dmxdev_buffer {
- u8 *data;
- int size;
- int pread;
- int pwrite;
- wait_queue_head_t queue;
- int error;
-};
-
struct dmxdev_filter {
- struct dvb_device *dvbdev;
-
union {
struct dmx_section_filter *sec;
} filter;
@@ -78,26 +68,17 @@ struct dmxdev_filter {
struct dmx_pes_filter_params pes;
} params;
- int type;
+ enum dmxdev_type type;
enum dmxdev_state state;
struct dmxdev *dev;
- struct dmxdev_buffer buffer;
+ struct dvb_ringbuffer buffer;
- struct semaphore mutex;
+ struct mutex mutex;
/* only for sections */
struct timer_list timer;
int todo;
u8 secheader[3];
-
- u16 pid;
-};
-
-
-struct dmxdev_dvr {
- int state;
- struct dmxdev *dev;
- struct dmxdev_buffer buffer;
};
@@ -106,7 +87,6 @@ struct dmxdev {
struct dvb_device *dvr_dvbdev;
struct dmxdev_filter *filter;
- struct dmxdev_dvr *dvr;
struct dmx_demux *demux;
int filternum;
@@ -114,10 +94,10 @@ struct dmxdev {
#define DMXDEV_CAP_DUPLEX 1
struct dmx_frontend *dvr_orig_fe;
- struct dmxdev_buffer dvr_buffer;
+ struct dvb_ringbuffer dvr_buffer;
#define DVR_BUFFER_SIZE (10*188*1024)
- struct semaphore mutex;
+ struct mutex mutex;
spinlock_t lock;
};
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index b4c899b15959..83ec5e06c482 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -589,18 +589,18 @@ static int dmx_ts_feed_set(struct dmx_ts_feed *ts_feed, u16 pid, int ts_type,
if (pid > DMX_MAX_PID)
return -EINVAL;
- if (down_interruptible(&demux->mutex))
+ if (mutex_lock_interruptible(&demux->mutex))
return -ERESTARTSYS;
if (ts_type & TS_DECODER) {
if (pes_type >= DMX_TS_PES_OTHER) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -EINVAL;
}
if (demux->pesfilter[pes_type] &&
demux->pesfilter[pes_type] != feed) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -EINVAL;
}
@@ -622,14 +622,14 @@ static int dmx_ts_feed_set(struct dmx_ts_feed *ts_feed, u16 pid, int ts_type,
#else
feed->buffer = vmalloc(feed->buffer_size);
if (!feed->buffer) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -ENOMEM;
}
#endif
}
feed->state = DMX_STATE_READY;
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return 0;
}
@@ -640,21 +640,21 @@ static int dmx_ts_feed_start_filtering(struct dmx_ts_feed *ts_feed)
struct dvb_demux *demux = feed->demux;
int ret;
- if (down_interruptible(&demux->mutex))
+ if (mutex_lock_interruptible(&demux->mutex))
return -ERESTARTSYS;
if (feed->state != DMX_STATE_READY || feed->type != DMX_TYPE_TS) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -EINVAL;
}
if (!demux->start_feed) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -ENODEV;
}
if ((ret = demux->start_feed(feed)) < 0) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return ret;
}
@@ -662,7 +662,7 @@ static int dmx_ts_feed_start_filtering(struct dmx_ts_feed *ts_feed)
ts_feed->is_filtering = 1;
feed->state = DMX_STATE_GO;
spin_unlock_irq(&demux->lock);
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return 0;
}
@@ -673,16 +673,16 @@ static int dmx_ts_feed_stop_filtering(struct dmx_ts_feed *ts_feed)
struct dvb_demux *demux = feed->demux;
int ret;
- if (down_interruptible(&demux->mutex))
+ if (mutex_lock_interruptible(&demux->mutex))
return -ERESTARTSYS;
if (feed->state < DMX_STATE_GO) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -EINVAL;
}
if (!demux->stop_feed) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -ENODEV;
}
@@ -692,7 +692,7 @@ static int dmx_ts_feed_stop_filtering(struct dmx_ts_feed *ts_feed)
ts_feed->is_filtering = 0;
feed->state = DMX_STATE_ALLOCATED;
spin_unlock_irq(&demux->lock);
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return ret;
}
@@ -704,11 +704,11 @@ static int dvbdmx_allocate_ts_feed(struct dmx_demux *dmx,
struct dvb_demux *demux = (struct dvb_demux *)dmx;
struct dvb_demux_feed *feed;
- if (down_interruptible(&demux->mutex))
+ if (mutex_lock_interruptible(&demux->mutex))
return -ERESTARTSYS;
if (!(feed = dvb_dmx_feed_alloc(demux))) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -EBUSY;
}
@@ -729,7 +729,7 @@ static int dvbdmx_allocate_ts_feed(struct dmx_demux *dmx,
if (!(feed->filter = dvb_dmx_filter_alloc(demux))) {
feed->state = DMX_STATE_FREE;
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -EBUSY;
}
@@ -737,7 +737,7 @@ static int dvbdmx_allocate_ts_feed(struct dmx_demux *dmx,
feed->filter->feed = feed;
feed->filter->state = DMX_STATE_READY;
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return 0;
}
@@ -748,11 +748,11 @@ static int dvbdmx_release_ts_feed(struct dmx_demux *dmx,
struct dvb_demux *demux = (struct dvb_demux *)dmx;
struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed;
- if (down_interruptible(&demux->mutex))
+ if (mutex_lock_interruptible(&demux->mutex))
return -ERESTARTSYS;
if (feed->state == DMX_STATE_FREE) {
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return -EINVAL;
}
#ifndef NOBUFS
@@ -770,7 +770,7 @@ static int dvbdmx_release_ts_feed(struct dmx_demux *dmx,
if (feed->ts_type & TS_DECODER && feed->pes_type < DMX_TS_PES_OTHER)
demux->pesfilter[feed->pes_type] = NULL;
- up(&demux->mutex);
+ mutex_unlock(&demux->mutex);
return 0;
}
@@ -785,12 +785,12 @@ static int dmx_section_feed_allocate_filter(struct dmx_section_feed *feed,
struct dvb_demux *dvbdemux = dvbdmxfeed->demux;
struct dvb_demux_filter *dvbdmxfilter;
- if (down_interruptible(&dvbdemux->mutex))
+ if (mutex_lock_interruptible(&dvbdemux->mutex))
return -ERESTARTSYS;
dvbdmxfilter = dvb_dmx_filter_alloc(dvbdemux);
if (!dvbdmxfilter) {
- up(&dvbdemux->mutex);
+ mutex_unlock(&dvbdemux->mutex);
return -EBUSY;
}
@@ -805,7 +805,7 @@ static int dmx_section_feed_allocate_filter(struct dmx_section_feed *feed,
dvbdmxfeed->filter = dvbdmxfilter;
spin_unlock_irq(&dvbdemux->lock);
- up(&dvbdemux->mutex);
+ mutex_unlock(&dvbdemux->mutex);
return 0;
}
@@ -819,7 +819,7 @@ static int dmx_section_feed_set(struct dmx_section_feed *feed,
if (pid > 0x1fff)
return -EINVAL;
- if (down_interruptible(&dvbdmx->mutex))
+ if (mutex_lock_interruptible(&dvbdmx->mutex))
return -ERESTARTSYS;
dvb_demux_feed_add(dvbdmxfeed);
@@ -833,13 +833,13 @@ static int dmx_section_feed_set(struct dmx_section_feed *feed,
#else
dvbdmxfeed->buffer = vmalloc(dvbdmxfeed->buffer_size);
if (!dvbdmxfeed->buffer) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -ENOMEM;
}
#endif
dvbdmxfeed->state = DMX_STATE_READY;
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return 0;
}
@@ -871,16 +871,16 @@ static int dmx_section_feed_start_filtering(struct dmx_section_feed *feed)
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
int ret;
- if (down_interruptible(&dvbdmx->mutex))
+ if (mutex_lock_interruptible(&dvbdmx->mutex))
return -ERESTARTSYS;
if (feed->is_filtering) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -EBUSY;
}
if (!dvbdmxfeed->filter) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -EINVAL;
}
@@ -890,14 +890,14 @@ static int dmx_section_feed_start_filtering(struct dmx_section_feed *feed)
dvbdmxfeed->feed.sec.seclen = 0;
if (!dvbdmx->start_feed) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -ENODEV;
}
prepare_secfilters(dvbdmxfeed);
if ((ret = dvbdmx->start_feed(dvbdmxfeed)) < 0) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return ret;
}
@@ -906,7 +906,7 @@ static int dmx_section_feed_start_filtering(struct dmx_section_feed *feed)
dvbdmxfeed->state = DMX_STATE_GO;
spin_unlock_irq(&dvbdmx->lock);
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return 0;
}
@@ -916,11 +916,11 @@ static int dmx_section_feed_stop_filtering(struct dmx_section_feed *feed)
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
int ret;
- if (down_interruptible(&dvbdmx->mutex))
+ if (mutex_lock_interruptible(&dvbdmx->mutex))
return -ERESTARTSYS;
if (!dvbdmx->stop_feed) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -ENODEV;
}
@@ -931,7 +931,7 @@ static int dmx_section_feed_stop_filtering(struct dmx_section_feed *feed)
feed->is_filtering = 0;
spin_unlock_irq(&dvbdmx->lock);
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return ret;
}
@@ -942,11 +942,11 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed,
struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
- if (down_interruptible(&dvbdmx->mutex))
+ if (mutex_lock_interruptible(&dvbdmx->mutex))
return -ERESTARTSYS;
if (dvbdmxfilter->feed != dvbdmxfeed) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -EINVAL;
}
@@ -966,7 +966,7 @@ static int dmx_section_feed_release_filter(struct dmx_section_feed *feed,
dvbdmxfilter->state = DMX_STATE_FREE;
spin_unlock_irq(&dvbdmx->lock);
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return 0;
}
@@ -977,11 +977,11 @@ static int dvbdmx_allocate_section_feed(struct dmx_demux *demux,
struct dvb_demux *dvbdmx = (struct dvb_demux *)demux;
struct dvb_demux_feed *dvbdmxfeed;
- if (down_interruptible(&dvbdmx->mutex))
+ if (mutex_lock_interruptible(&dvbdmx->mutex))
return -ERESTARTSYS;
if (!(dvbdmxfeed = dvb_dmx_feed_alloc(dvbdmx))) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -EBUSY;
}
@@ -1006,7 +1006,7 @@ static int dvbdmx_allocate_section_feed(struct dmx_demux *demux,
(*feed)->stop_filtering = dmx_section_feed_stop_filtering;
(*feed)->release_filter = dmx_section_feed_release_filter;
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return 0;
}
@@ -1016,11 +1016,11 @@ static int dvbdmx_release_section_feed(struct dmx_demux *demux,
struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed;
struct dvb_demux *dvbdmx = (struct dvb_demux *)demux;
- if (down_interruptible(&dvbdmx->mutex))
+ if (mutex_lock_interruptible(&dvbdmx->mutex))
return -ERESTARTSYS;
if (dvbdmxfeed->state == DMX_STATE_FREE) {
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return -EINVAL;
}
#ifndef NOBUFS
@@ -1033,7 +1033,7 @@ static int dvbdmx_release_section_feed(struct dmx_demux *demux,
dvbdmxfeed->pid = 0xffff;
- up(&dvbdmx->mutex);
+ mutex_unlock(&dvbdmx->mutex);
return 0;
}
@@ -1071,10 +1071,10 @@ static int dvbdmx_write(struct dmx_demux *demux, const char *buf, size_t count)
if ((!demux->frontend) || (demux->frontend->source != DMX_MEMORY_FE))
return -EINVAL;
- if (down_interruptible(&dvbdemux->mutex))
+ if (mutex_lock_interruptible(&dvbdemux->mutex))
return -ERESTARTSYS;
dvb_dmx_swfilter(dvbdemux, buf, count);
- up(&dvbdemux->mutex);
+ mutex_unlock(&dvbdemux->mutex);
if (signal_pending(current))
return -EINTR;
@@ -1126,11 +1126,11 @@ static int dvbdmx_connect_frontend(struct dmx_demux *demux,
if (demux->frontend)
return -EINVAL;
- if (down_interruptible(&dvbdemux->mutex))
+ if (mutex_lock_interruptible(&dvbdemux->mutex))
return -ERESTARTSYS;
demux->frontend = frontend;
- up(&dvbdemux->mutex);
+ mutex_unlock(&dvbdemux->mutex);
return 0;
}
@@ -1138,11 +1138,11 @@ static int dvbdmx_disconnect_frontend(struct dmx_demux *demux)
{
struct dvb_demux *dvbdemux = (struct dvb_demux *)demux;
- if (down_interruptible(&dvbdemux->mutex))
+ if (mutex_lock_interruptible(&dvbdemux->mutex))
return -ERESTARTSYS;
demux->frontend = NULL;
- up(&dvbdemux->mutex);
+ mutex_unlock(&dvbdemux->mutex);
return 0;
}
@@ -1215,7 +1215,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux)
dmx->disconnect_frontend = dvbdmx_disconnect_frontend;
dmx->get_pes_pids = dvbdmx_get_pes_pids;
- sema_init(&dvbdemux->mutex, 1);
+ mutex_init(&dvbdemux->mutex);
spin_lock_init(&dvbdemux->lock);
return 0;
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.h b/drivers/media/dvb/dvb-core/dvb_demux.h
index 0cc888339d52..2c5f915329ca 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.h
+++ b/drivers/media/dvb/dvb-core/dvb_demux.h
@@ -26,7 +26,7 @@
#include
#include
#include
-#include
+#include
#include "demux.h"
@@ -125,7 +125,7 @@ struct dvb_demux {
u8 tsbuf[204];
int tsbufp;
- struct semaphore mutex;
+ struct mutex mutex;
spinlock_t lock;
};
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 771f32d889e6..2c3ea8f95dcd 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -37,7 +37,6 @@
#include
#include
#include
-#include
#include "dvb_frontend.h"
#include "dvbdev.h"
@@ -50,13 +49,13 @@ static int dvb_powerdown_on_sleep = 1;
module_param_named(frontend_debug, dvb_frontend_debug, int, 0644);
MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off).");
-module_param(dvb_shutdown_timeout, int, 0444);
+module_param(dvb_shutdown_timeout, int, 0644);
MODULE_PARM_DESC(dvb_shutdown_timeout, "wait seconds after close() before suspending hardware");
-module_param(dvb_force_auto_inversion, int, 0444);
+module_param(dvb_force_auto_inversion, int, 0644);
MODULE_PARM_DESC(dvb_force_auto_inversion, "0: normal (default), 1: INVERSION_AUTO forced always");
-module_param(dvb_override_tune_delay, int, 0444);
+module_param(dvb_override_tune_delay, int, 0644);
MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt");
-module_param(dvb_powerdown_on_sleep, int, 0444);
+module_param(dvb_powerdown_on_sleep, int, 0644);
MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB volatage off on sleep (default)");
#define dprintk if (dvb_frontend_debug) printk
@@ -88,7 +87,7 @@ MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB vola
* FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again.
*/
-static DECLARE_MUTEX(frontend_mutex);
+static DEFINE_MUTEX(frontend_mutex);
struct dvb_frontend_private {
@@ -1021,12 +1020,12 @@ int dvb_register_frontend(struct dvb_adapter* dvb,
dprintk ("%s\n", __FUNCTION__);
- if (down_interruptible (&frontend_mutex))
+ if (mutex_lock_interruptible(&frontend_mutex))
return -ERESTARTSYS;
fe->frontend_priv = kzalloc(sizeof(struct dvb_frontend_private), GFP_KERNEL);
if (fe->frontend_priv == NULL) {
- up(&frontend_mutex);
+ mutex_unlock(&frontend_mutex);
return -ENOMEM;
}
fepriv = fe->frontend_priv;
@@ -1045,7 +1044,7 @@ int dvb_register_frontend(struct dvb_adapter* dvb,
dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template,
fe, DVB_DEVICE_FRONTEND);
- up (&frontend_mutex);
+ mutex_unlock(&frontend_mutex);
return 0;
}
EXPORT_SYMBOL(dvb_register_frontend);
@@ -1055,7 +1054,7 @@ int dvb_unregister_frontend(struct dvb_frontend* fe)
struct dvb_frontend_private *fepriv = fe->frontend_priv;
dprintk ("%s\n", __FUNCTION__);
- down (&frontend_mutex);
+ mutex_lock(&frontend_mutex);
dvb_unregister_device (fepriv->dvbdev);
dvb_frontend_stop (fe);
if (fe->ops->release)
@@ -1064,7 +1063,7 @@ int dvb_unregister_frontend(struct dvb_frontend* fe)
printk("dvb_frontend: Demodulator (%s) does not have a release callback!\n", fe->ops->info.name);
/* fe is invalid now */
kfree(fepriv);
- up (&frontend_mutex);
+ mutex_unlock(&frontend_mutex);
return 0;
}
EXPORT_SYMBOL(dvb_unregister_frontend);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 70a6d14efda7..d5aee5ad67a0 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -104,6 +104,7 @@ struct dvb_frontend {
struct dvb_adapter *dvb;
void* demodulator_priv;
void* frontend_priv;
+ void* misc_priv;
};
extern int dvb_register_frontend(struct dvb_adapter* dvb,
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 6711eb6a058c..2f0f35811bf7 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -62,6 +62,7 @@
#include
#include
#include
+#include
#include "dvb_demux.h"
#include "dvb_net.h"
@@ -151,8 +152,7 @@ struct dvb_net_priv {
unsigned char ule_bridged; /* Whether the ULE_BRIDGED extension header was found. */
int ule_sndu_remain; /* Nr. of bytes still required for current ULE SNDU. */
unsigned long ts_count; /* Current ts cell counter. */
-
- struct semaphore mutex;
+ struct mutex mutex;
};
@@ -889,7 +889,7 @@ static int dvb_net_feed_start(struct net_device *dev)
unsigned char *mac = (unsigned char *) dev->dev_addr;
dprintk("%s: rx_mode %i\n", __FUNCTION__, priv->rx_mode);
- down(&priv->mutex);
+ mutex_lock(&priv->mutex);
if (priv->tsfeed || priv->secfeed || priv->secfilter || priv->multi_secfilter[0])
printk("%s: BUG %d\n", __FUNCTION__, __LINE__);
@@ -974,7 +974,7 @@ static int dvb_net_feed_start(struct net_device *dev)
ret = -EINVAL;
error:
- up(&priv->mutex);
+ mutex_unlock(&priv->mutex);
return ret;
}
@@ -984,7 +984,7 @@ static int dvb_net_feed_stop(struct net_device *dev)
int i, ret = 0;
dprintk("%s\n", __FUNCTION__);
- down(&priv->mutex);
+ mutex_lock(&priv->mutex);
if (priv->feedtype == DVB_NET_FEEDTYPE_MPE) {
if (priv->secfeed) {
if (priv->secfeed->is_filtering) {
@@ -1026,7 +1026,7 @@ static int dvb_net_feed_stop(struct net_device *dev)
printk("%s: no ts feed to stop\n", dev->name);
} else
ret = -EINVAL;
- up(&priv->mutex);
+ mutex_unlock(&priv->mutex);
return ret;
}
@@ -1208,7 +1208,7 @@ static int dvb_net_add_if(struct dvb_net *dvbnet, u16 pid, u8 feedtype)
INIT_WORK(&priv->set_multicast_list_wq, wq_set_multicast_list, net);
INIT_WORK(&priv->restart_net_feed_wq, wq_restart_net_feed, net);
- init_MUTEX(&priv->mutex);
+ mutex_init(&priv->mutex);
net->base_addr = pid;
diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
index 77ad2410f4d3..c972fe014c58 100644
--- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
+++ b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
@@ -45,6 +45,7 @@ void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data, size_t len)
rbuf->pread=rbuf->pwrite=0;
rbuf->data=data;
rbuf->size=len;
+ rbuf->error=0;
init_waitqueue_head(&rbuf->queue);
@@ -87,6 +88,7 @@ ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf)
void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf)
{
rbuf->pread = rbuf->pwrite;
+ rbuf->error = 0;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.h b/drivers/media/dvb/dvb-core/dvb_ringbuffer.h
index 6d2560972771..d97714e75736 100644
--- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.h
+++ b/drivers/media/dvb/dvb-core/dvb_ringbuffer.h
@@ -35,6 +35,7 @@ struct dvb_ringbuffer {
ssize_t size;
ssize_t pread;
ssize_t pwrite;
+ int error;
wait_queue_head_t queue;
spinlock_t lock;
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 162f9795cd89..e14bf43941e3 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -77,7 +77,7 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i;
- if (down_interruptible(&d->i2c_sem) < 0)
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
if (num > 2)
@@ -126,7 +126,7 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
}
}
- up(&d->i2c_sem);
+ mutex_unlock(&d->i2c_mutex);
return i;
}
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index 269d899da488..2d52b76671d3 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -128,7 +128,7 @@ static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i;
- if (down_interruptible(&d->i2c_sem) < 0)
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
if (num > 2)
@@ -146,7 +146,7 @@ static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
break;
}
- up(&d->i2c_sem);
+ mutex_unlock(&d->i2c_mutex);
return i;
}
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index caa1346e3063..91136c00ce9d 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -48,7 +48,7 @@ static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i;
- if (down_interruptible(&d->i2c_sem) < 0)
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
if (num > 2)
@@ -67,7 +67,7 @@ static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
break;
}
- up(&d->i2c_sem);
+ mutex_unlock(&d->i2c_mutex);
return i;
}
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index ce34a55e5c24..a1705ecb9a54 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -42,8 +42,8 @@ static int dvb_usb_init(struct dvb_usb_device *d)
{
int ret = 0;
- sema_init(&d->usb_sem, 1);
- sema_init(&d->i2c_sem, 1);
+ mutex_init(&d->usb_mutex);
+ mutex_init(&d->i2c_mutex);
d->state = DVB_USB_STATE_INIT;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
index ee821974dc60..9002f35aa952 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
@@ -21,7 +21,7 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
if (wbuf == NULL || wlen == 0)
return -EINVAL;
- if ((ret = down_interruptible(&d->usb_sem)))
+ if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
return ret;
deb_xfer(">>> ");
@@ -53,7 +53,7 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
}
}
- up(&d->usb_sem);
+ mutex_unlock(&d->usb_mutex);
return ret;
}
EXPORT_SYMBOL(dvb_usb_generic_rw);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index d4909e5c67e0..fead958a57e3 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -12,6 +12,7 @@
#include
#include
#include
+#include
#include "dvb_frontend.h"
#include "dvb_demux.h"
@@ -227,8 +228,8 @@ struct dvb_usb_properties {
* @feedcount: number of reqested feeds (used for streaming-activation)
* @pid_filtering: is hardware pid_filtering used or not.
*
- * @usb_sem: semaphore of USB control messages (reading needs two messages)
- * @i2c_sem: semaphore for i2c-transfers
+ * @usb_mutex: semaphore of USB control messages (reading needs two messages)
+ * @i2c_mutex: semaphore for i2c-transfers
*
* @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
* @pll_addr: I2C address of the tuner for programming
@@ -283,10 +284,10 @@ struct dvb_usb_device {
int pid_filtering;
/* locking */
- struct semaphore usb_sem;
+ struct mutex usb_mutex;
/* i2c */
- struct semaphore i2c_sem;
+ struct mutex i2c_mutex;
struct i2c_adapter i2c_adap;
/* tuner programming information */
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index 4a95eca81c5c..b2f098a2d5f7 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -75,7 +75,7 @@ int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int il
{
int ret;
- if ((ret = down_interruptible(&d->usb_sem)))
+ if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
return ret;
if ((ret = vp702x_usb_out_op(d,REQUEST_OUT,0,0,o,olen)) < 0)
@@ -84,7 +84,7 @@ int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int il
ret = vp702x_usb_in_op(d,REQUEST_IN,0,0,i,ilen);
unlock:
- up(&d->usb_sem);
+ mutex_unlock(&d->usb_mutex);
return ret;
}
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 3835235b68df..8ea3834a6cf8 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -38,7 +38,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in,
deb_xfer("out buffer: ");
debug_dump(outbuf,outlen+1,deb_xfer);
- if ((ret = down_interruptible(&d->usb_sem)))
+ if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
return ret;
if (usb_control_msg(d->udev,
@@ -68,7 +68,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in,
memcpy(in,&inbuf[1],inlen);
unlock:
- up(&d->usb_sem);
+ mutex_unlock(&d->usb_mutex);
return ret;
}
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index c676b1e23ab0..94233168d241 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -116,6 +116,12 @@ config DVB_MT352
help
A DVB-T tuner module. Say Y when you want to support this frontend.
+config DVB_ZL10353
+ tristate "Zarlink ZL10353 based"
+ depends on DVB_CORE
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
+
config DVB_DIB3000MB
tristate "DiBcom 3000M-B"
depends on DVB_CORE
@@ -155,7 +161,7 @@ comment "ATSC (North American/Korean Terresterial DTV) frontends"
depends on DVB_CORE
config DVB_NXT200X
- tristate "Nextwave NXT2002/NXT2004 based"
+ tristate "NxtWave Communications NXT2002/NXT2004 based"
depends on DVB_CORE
select FW_LOADER
help
@@ -169,14 +175,14 @@ config DVB_NXT200X
or /lib/firmware (depending on configuration of firmware hotplug).
config DVB_OR51211
- tristate "or51211 based (pcHDTV HD2000 card)"
+ tristate "Oren OR51211 based"
depends on DVB_CORE
select FW_LOADER
help
An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
config DVB_OR51132
- tristate "OR51132 based (pcHDTV HD3000 card)"
+ tristate "Oren OR51132 based"
depends on DVB_CORE
select FW_LOADER
help
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 1af769cd90c0..d09b6071fbaf 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_DVB_TDA1004X) += tda1004x.o
obj-$(CONFIG_DVB_SP887X) += sp887x.o
obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
obj-$(CONFIG_DVB_MT352) += mt352.o
+obj-$(CONFIG_DVB_ZL10353) += zl10353.o
obj-$(CONFIG_DVB_CX22702) += cx22702.o
obj-$(CONFIG_DVB_TDA10021) += tda10021.o
obj-$(CONFIG_DVB_STV0297) += stv0297.o
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index caaee893ca76..1708a1d4893e 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -39,6 +39,7 @@
#include
#include
#include
+#include
#include "dvb_frontend.h"
#include "bcm3510.h"
@@ -52,7 +53,7 @@ struct bcm3510_state {
struct dvb_frontend frontend;
/* demodulator private data */
- struct semaphore hab_sem;
+ struct mutex hab_mutex;
u8 firmware_loaded:1;
unsigned long next_status_check;
@@ -213,7 +214,7 @@ static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *ob
dbufout(ob,olen+2,deb_hab);
deb_hab("\n");
- if (down_interruptible(&st->hab_sem) < 0)
+ if (mutex_lock_interruptible(&st->hab_mutex) < 0)
return -EAGAIN;
if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
@@ -226,7 +227,7 @@ static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *ob
memcpy(ibuf,&ib[2],ilen);
error:
- up(&st->hab_sem);
+ mutex_unlock(&st->hab_mutex);
return ret;
}
@@ -796,7 +797,7 @@ struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
state->frontend.ops = &state->ops;
state->frontend.demodulator_priv = state;
- sema_init(&state->hab_sem, 1);
+ mutex_init(&state->hab_mutex);
if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
goto error;
diff --git a/drivers/media/dvb/frontends/bsbe1.h b/drivers/media/dvb/frontends/bsbe1.h
new file mode 100644
index 000000000000..78573b22ada9
--- /dev/null
+++ b/drivers/media/dvb/frontends/bsbe1.h
@@ -0,0 +1,123 @@
+/*
+ * bsbe1.h - ALPS BSBE1 tuner support (moved from av7110.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef BSBE1_H
+#define BSBE1_H
+
+static u8 alps_bsbe1_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
+};
+
+
+static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
+}
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
+{
+ int ret;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+ ret = i2c_transfer(i2c, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsbe1_set_symbol_rate,
+ .pll_set = alps_bsbe1_pll_set,
+};
+
+#endif
diff --git a/drivers/media/dvb/frontends/bsru6.h b/drivers/media/dvb/frontends/bsru6.h
new file mode 100644
index 000000000000..2a5366ce79cc
--- /dev/null
+++ b/drivers/media/dvb/frontends/bsru6.h
@@ -0,0 +1,140 @@
+/*
+ * bsru6.h - ALPS BSRU6 tuner support (moved from budget-ci.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef BSRU6_H
+#define BSRU6_H
+
+static u8 alps_bsru6_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x52,
+ 0xff, 0xff
+};
+
+static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+ return 0;
+}
+
+static int alps_bsru6_pll_set(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters *params)
+{
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ buf[3] = 0xC4;
+
+ if (params->frequency > 1530000)
+ buf[3] = 0xc0;
+
+ if (i2c_transfer(i2c, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static struct stv0299_config alps_bsru6_config = {
+ .demod_address = 0x68,
+ .inittab = alps_bsru6_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+ .pll_set = alps_bsru6_pll_set,
+};
+
+#endif
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index d15d32c51dc5..f3edf8b517dd 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -371,6 +371,15 @@ static int cx24110_initfe(struct dvb_frontend* fe)
return 0;
}
+static int cx24110_sleep(struct dvb_frontend *fe)
+{
+ struct cx24110_state *state = fe->demodulator_priv;
+
+ if (state->config->pll_sleep)
+ return state->config->pll_sleep(fe);
+ return 0;
+}
+
static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
struct cx24110_state *state = fe->demodulator_priv;
@@ -418,6 +427,9 @@ static int cx24110_send_diseqc_msg(struct dvb_frontend* fe,
struct cx24110_state *state = fe->demodulator_priv;
unsigned long timeout;
+ if (cmd->msg_len < 3 || cmd->msg_len > 6)
+ return -EINVAL; /* not implemented */
+
for (i = 0; i < cmd->msg_len; i++)
cx24110_writereg(state, 0x79 + i, cmd->msg[i]);
@@ -639,6 +651,7 @@ static struct dvb_frontend_ops cx24110_ops = {
.release = cx24110_release,
.init = cx24110_initfe,
+ .sleep = cx24110_sleep,
.set_frontend = cx24110_set_frontend,
.get_frontend = cx24110_get_frontend,
.read_status = cx24110_read_status,
diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h
index b63ecf26421a..609ac642b406 100644
--- a/drivers/media/dvb/frontends/cx24110.h
+++ b/drivers/media/dvb/frontends/cx24110.h
@@ -35,6 +35,7 @@ struct cx24110_config
/* PLL maintenance */
int (*pll_init)(struct dvb_frontend* fe);
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
+ int (*pll_sleep)(struct dvb_frontend* fe);
};
extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 4dcb6050d4fa..b6e2c387a04c 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -362,6 +362,63 @@ struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = {
};
EXPORT_SYMBOL(dvb_pll_philips_sd1878_tda8261);
+/*
+ * Philips TD1316 Tuner.
+ */
+static void td1316_bw(u8 *buf, u32 freq, int bandwidth)
+{
+ u8 band;
+
+ /* determine band */
+ if (freq < 161000000)
+ band = 1;
+ else if (freq < 444000000)
+ band = 2;
+ else
+ band = 4;
+
+ buf[3] |= band;
+
+ /* setup PLL filter */
+ if (bandwidth == BANDWIDTH_8_MHZ)
+ buf[3] |= 1 << 3;
+}
+
+struct dvb_pll_desc dvb_pll_philips_td1316 = {
+ .name = "Philips TD1316",
+ .min = 87000000,
+ .max = 895000000,
+ .setbw = td1316_bw,
+ .count = 9,
+ .entries = {
+ { 93834000, 36166000, 166666, 0xca, 0x60},
+ { 123834000, 36166000, 166666, 0xca, 0xa0},
+ { 163834000, 36166000, 166666, 0xca, 0xc0},
+ { 253834000, 36166000, 166666, 0xca, 0x60},
+ { 383834000, 36166000, 166666, 0xca, 0xa0},
+ { 443834000, 36166000, 166666, 0xca, 0xc0},
+ { 583834000, 36166000, 166666, 0xca, 0x60},
+ { 793834000, 36166000, 166666, 0xca, 0xa0},
+ { 858834000, 36166000, 166666, 0xca, 0xe0},
+ },
+};
+EXPORT_SYMBOL(dvb_pll_philips_td1316);
+
+/* FE6600 used on DViCO Hybrid */
+struct dvb_pll_desc dvb_pll_thomson_fe6600 = {
+ .name = "Thomson FE6600",
+ .min = 44250000,
+ .max = 858000000,
+ .count = 4,
+ .entries = {
+ { 250000000, 36213333, 166667, 0xb4, 0x12 },
+ { 455000000, 36213333, 166667, 0xfe, 0x11 },
+ { 775500000, 36213333, 166667, 0xbc, 0x18 },
+ { 999999999, 36213333, 166667, 0xf4, 0x18 },
+ }
+};
+EXPORT_SYMBOL(dvb_pll_thomson_fe6600);
+
/* ----------------------------------------------------------- */
/* code */
@@ -391,8 +448,8 @@ int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
div = (freq + desc->entries[i].offset) / desc->entries[i].stepsize;
buf[0] = div >> 8;
buf[1] = div & 0xff;
- buf[2] = desc->entries[i].cb1;
- buf[3] = desc->entries[i].cb2;
+ buf[2] = desc->entries[i].config;
+ buf[3] = desc->entries[i].cb;
if (desc->setbw)
desc->setbw(buf, freq, bandwidth);
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index bb8d4b4eb183..2b8461784989 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -15,8 +15,8 @@ struct dvb_pll_desc {
u32 limit;
u32 offset;
u32 stepsize;
- u8 cb1;
- u8 cb2;
+ u8 config;
+ u8 cb;
} entries[12];
};
@@ -40,6 +40,9 @@ extern struct dvb_pll_desc dvb_pll_tuv1236d;
extern struct dvb_pll_desc dvb_pll_tdhu2;
extern struct dvb_pll_desc dvb_pll_samsung_tbmv;
extern struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261;
+extern struct dvb_pll_desc dvb_pll_philips_td1316;
+
+extern struct dvb_pll_desc dvb_pll_thomson_fe6600;
int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
u32 freq, int bandwidth);
diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h
new file mode 100644
index 000000000000..0dcbe61b61b1
--- /dev/null
+++ b/drivers/media/dvb/frontends/lnbp21.h
@@ -0,0 +1,139 @@
+/*
+ * lnbp21.h - driver for lnb supply and control ic lnbp21
+ *
+ * Copyright (C) 2006 Oliver Endriss
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef _LNBP21_H
+#define _LNBP21_H
+
+/* system register */
+#define LNBP21_OLF 0x01
+#define LNBP21_OTF 0x02
+#define LNBP21_EN 0x04
+#define LNBP21_VSEL 0x08
+#define LNBP21_LLC 0x10
+#define LNBP21_TEN 0x20
+#define LNBP21_ISEL 0x40
+#define LNBP21_PCL 0x80
+
+struct lnbp21 {
+ u8 config;
+ u8 override_or;
+ u8 override_and;
+ struct i2c_adapter *i2c;
+ void (*release_chain)(struct dvb_frontend* fe);
+};
+
+static int lnbp21_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0,
+ .buf = &lnbp21->config,
+ .len = sizeof(lnbp21->config) };
+
+ lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN);
+
+ switch(voltage) {
+ case SEC_VOLTAGE_OFF:
+ break;
+ case SEC_VOLTAGE_13:
+ lnbp21->config |= LNBP21_EN;
+ break;
+ case SEC_VOLTAGE_18:
+ lnbp21->config |= (LNBP21_EN | LNBP21_VSEL);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ lnbp21->config |= lnbp21->override_or;
+ lnbp21->config &= lnbp21->override_and;
+
+ return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
+{
+ struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0,
+ .buf = &lnbp21->config,
+ .len = sizeof(lnbp21->config) };
+
+ if (arg)
+ lnbp21->config |= LNBP21_LLC;
+ else
+ lnbp21->config &= ~LNBP21_LLC;
+
+ lnbp21->config |= lnbp21->override_or;
+ lnbp21->config &= lnbp21->override_and;
+
+ return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static void lnbp21_exit(struct dvb_frontend *fe)
+{
+ struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+
+ /* LNBP power off */
+ lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
+
+ /* free data & call next release routine */
+ fe->ops->release = lnbp21->release_chain;
+ kfree(fe->misc_priv);
+ fe->misc_priv = NULL;
+ if (fe->ops->release)
+ fe->ops->release(fe);
+}
+
+static int lnbp21_init(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear)
+{
+ struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL);
+
+ if (!lnbp21)
+ return -ENOMEM;
+
+ /* default configuration */
+ lnbp21->config = LNBP21_ISEL;
+
+ /* bits which should be forced to '1' */
+ lnbp21->override_or = override_set;
+
+ /* bits which should be forced to '0' */
+ lnbp21->override_and = ~override_clear;
+
+ /* install release callback */
+ lnbp21->release_chain = fe->ops->release;
+ fe->ops->release = lnbp21_exit;
+
+ /* override frontend ops */
+ fe->ops->set_voltage = lnbp21_set_voltage;
+ fe->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
+
+ lnbp21->i2c = i2c;
+ fe->misc_priv = lnbp21;
+
+ return lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
+}
+
+#endif
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index c63e9a5084eb..8e8df7b4ca0e 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -229,7 +229,7 @@ static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
dprintk("%s\n", __FUNCTION__);
result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
- msleep(1);
+ msleep(20);
return result;
}
@@ -502,7 +502,12 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
const struct firmware *fw;
/* reset + wake up chip */
- tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
+ if (state->config->xtal_freq == TDA10046_XTAL_4M) {
+ tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
+ } else {
+ dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __FUNCTION__);
+ tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80);
+ }
tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
/* let the clocks recover from sleep */
msleep(5);
@@ -651,7 +656,7 @@ static int tda10046_init(struct dvb_frontend* fe)
// tda setup
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87); // 100 ppm crystal, select HP stream
- tda1004x_write_byteI(state, TDA1004X_CONFC1, 8); // disable pulse killer
+ tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88); // enable pulse killer
switch (state->config->agc_config) {
case TDA10046_AGC_DEFAULT:
@@ -672,6 +677,12 @@ static int tda10046_init(struct dvb_frontend* fe)
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
break;
+ case TDA10046_AGC_TDA827X_GPL:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+ break;
}
tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
@@ -683,6 +694,7 @@ static int tda10046_init(struct dvb_frontend* fe)
tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
+ // tda1004x_write_mask(state, 0x50, 0x80, 0x80); // handle out of guard echoes
tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
state->initialised = 1;
@@ -1027,6 +1039,7 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status
if (status == -1)
return -EIO;
cber |= (status << 8);
+ // The address 0x20 should be read to cope with a TDA10046 bug
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
if (cber != 65535)
@@ -1047,7 +1060,8 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status
status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
if (status == -1)
return -EIO;
- vber |= ((status << 16) & 0x0f);
+ vber |= (status & 0x0f) << 16;
+ // The CVBER_LUT should be read to cope with TDA10046 hardware bug
tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
// if RS has passed some valid TS packets, then we must be
@@ -1161,6 +1175,7 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
if (tmp < 0)
return -EIO;
*ber |= (tmp << 9);
+ // The address 0x20 should be read to cope with a TDA10046 bug
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
dprintk("%s: ber=0x%x\n", __FUNCTION__, *ber);
@@ -1187,6 +1202,8 @@ static int tda1004x_sleep(struct dvb_frontend* fe)
tda1004x_disable_tuner_i2c(state);
}
}
+ /* set outputs to tristate */
+ tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
break;
}
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index 8659c52647ad..cc0c4af64067 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -35,7 +35,8 @@ enum tda10046_agc {
TDA10046_AGC_DEFAULT, /* original configuration */
TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */
TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */
- TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
+ TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
+ TDA10046_AGC_TDA827X_GPL, /* same as above, but GPIOs 0 */
};
enum tda10046_if {
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
new file mode 100644
index 000000000000..d7d9f59d76d2
--- /dev/null
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -0,0 +1,311 @@
+/*
+ * Driver for Zarlink DVB-T ZL10353 demodulator
+ *
+ * Copyright (C) 2006 Christopher Pascoe
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include "dvb_frontend.h"
+#include "zl10353_priv.h"
+#include "zl10353.h"
+
+struct zl10353_state {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend frontend;
+ struct dvb_frontend_ops ops;
+
+ struct zl10353_config config;
+};
+
+static int debug_regs = 0;
+
+static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
+{
+ struct zl10353_state *state = fe->demodulator_priv;
+ u8 buf[2] = { reg, val };
+ struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
+ .buf = buf, .len = 2 };
+ int err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1) {
+ printk("zl10353: write to reg %x failed (err = %d)!\n", reg, err);
+ return err;
+ }
+ return 0;
+}
+
+int zl10353_write(struct dvb_frontend *fe, u8 *ibuf, int ilen)
+{
+ int err, i;
+ for (i = 0; i < ilen - 1; i++)
+ if ((err = zl10353_single_write(fe, ibuf[0] + i, ibuf[i + 1])))
+ return err;
+
+ return 0;
+}
+
+static int zl10353_read_register(struct zl10353_state *state, u8 reg)
+{
+ int ret;
+ u8 b0[1] = { reg };
+ u8 b1[1] = { 0 };
+ struct i2c_msg msg[2] = { { .addr = state->config.demod_address,
+ .flags = 0,
+ .buf = b0, .len = 1 },
+ { .addr = state->config.demod_address,
+ .flags = I2C_M_RD,
+ .buf = b1, .len = 1 } };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) {
+ printk("%s: readreg error (reg=%d, ret==%i)\n",
+ __FUNCTION__, reg, ret);
+ return ret;
+ }
+
+ return b1[0];
+}
+
+static void zl10353_dump_regs(struct dvb_frontend *fe)
+{
+ struct zl10353_state *state = fe->demodulator_priv;
+ char buf[52], buf2[4];
+ int ret;
+ u8 reg;
+
+ /* Dump all registers. */
+ for (reg = 0; ; reg++) {
+ if (reg % 16 == 0) {
+ if (reg)
+ printk(KERN_DEBUG "%s\n", buf);
+ sprintf(buf, "%02x: ", reg);
+ }
+ ret = zl10353_read_register(state, reg);
+ if (ret >= 0)
+ sprintf(buf2, "%02x ", (u8)ret);
+ else
+ strcpy(buf2, "-- ");
+ strcat(buf, buf2);
+ if (reg == 0xff)
+ break;
+ }
+ printk(KERN_DEBUG "%s\n", buf);
+}
+
+static int zl10353_sleep(struct dvb_frontend *fe)
+{
+ static u8 zl10353_softdown[] = { 0x50, 0x0C, 0x44 };
+
+ zl10353_write(fe, zl10353_softdown, sizeof(zl10353_softdown));
+ return 0;
+}
+
+static int zl10353_set_parameters(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *param)
+{
+ struct zl10353_state *state = fe->demodulator_priv;
+ u8 pllbuf[6] = { 0x67 };
+
+ /* These settings set "auto-everything" and start the FSM. */
+ zl10353_single_write(fe, 0x55, 0x80);
+ udelay(200);
+ zl10353_single_write(fe, 0xEA, 0x01);
+ udelay(200);
+ zl10353_single_write(fe, 0xEA, 0x00);
+
+ zl10353_single_write(fe, 0x56, 0x28);
+ zl10353_single_write(fe, 0x89, 0x20);
+ zl10353_single_write(fe, 0x5E, 0x00);
+ zl10353_single_write(fe, 0x65, 0x5A);
+ zl10353_single_write(fe, 0x66, 0xE9);
+ zl10353_single_write(fe, 0x62, 0x0A);
+
+ state->config.pll_set(fe, param, pllbuf + 1);
+ zl10353_write(fe, pllbuf, sizeof(pllbuf));
+
+ zl10353_single_write(fe, 0x70, 0x01);
+ udelay(250);
+ zl10353_single_write(fe, 0xE4, 0x00);
+ zl10353_single_write(fe, 0xE5, 0x2A);
+ zl10353_single_write(fe, 0xE9, 0x02);
+ zl10353_single_write(fe, 0xE7, 0x40);
+ zl10353_single_write(fe, 0xE8, 0x10);
+
+ return 0;
+}
+
+static int zl10353_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct zl10353_state *state = fe->demodulator_priv;
+ int s6, s7, s8;
+
+ if ((s6 = zl10353_read_register(state, STATUS_6)) < 0)
+ return -EREMOTEIO;
+ if ((s7 = zl10353_read_register(state, STATUS_7)) < 0)
+ return -EREMOTEIO;
+ if ((s8 = zl10353_read_register(state, STATUS_8)) < 0)
+ return -EREMOTEIO;
+
+ *status = 0;
+ if (s6 & (1 << 2))
+ *status |= FE_HAS_CARRIER;
+ if (s6 & (1 << 1))
+ *status |= FE_HAS_VITERBI;
+ if (s6 & (1 << 5))
+ *status |= FE_HAS_LOCK;
+ if (s7 & (1 << 4))
+ *status |= FE_HAS_SYNC;
+ if (s8 & (1 << 6))
+ *status |= FE_HAS_SIGNAL;
+
+ if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
+ (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
+ *status &= ~FE_HAS_LOCK;
+
+ return 0;
+}
+
+static int zl10353_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct zl10353_state *state = fe->demodulator_priv;
+ u8 _snr;
+
+ if (debug_regs)
+ zl10353_dump_regs(fe);
+
+ _snr = zl10353_read_register(state, SNR);
+ *snr = (_snr << 8) | _snr;
+
+ return 0;
+}
+
+static int zl10353_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings
+ *fe_tune_settings)
+{
+ fe_tune_settings->min_delay_ms = 1000;
+ fe_tune_settings->step_size = 0;
+ fe_tune_settings->max_drift = 0;
+
+ return 0;
+}
+
+static int zl10353_init(struct dvb_frontend *fe)
+{
+ struct zl10353_state *state = fe->demodulator_priv;
+ u8 zl10353_reset_attach[6] = { 0x50, 0x03, 0x64, 0x46, 0x15, 0x0F };
+ int rc = 0;
+
+ if (debug_regs)
+ zl10353_dump_regs(fe);
+
+ /* Do a "hard" reset if not already done */
+ if (zl10353_read_register(state, 0x50) != 0x03) {
+ rc = zl10353_write(fe, zl10353_reset_attach,
+ sizeof(zl10353_reset_attach));
+ if (debug_regs)
+ zl10353_dump_regs(fe);
+ }
+
+ return 0;
+}
+
+static void zl10353_release(struct dvb_frontend *fe)
+{
+ struct zl10353_state *state = fe->demodulator_priv;
+
+ kfree(state);
+}
+
+static struct dvb_frontend_ops zl10353_ops;
+
+struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct zl10353_state *state = NULL;
+
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct zl10353_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->i2c = i2c;
+ memcpy(&state->config, config, sizeof(struct zl10353_config));
+ memcpy(&state->ops, &zl10353_ops, sizeof(struct dvb_frontend_ops));
+
+ /* check if the demod is there */
+ if (zl10353_read_register(state, CHIP_ID) != ID_ZL10353)
+ goto error;
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+
+ return &state->frontend;
+error:
+ kfree(state);
+ return NULL;
+}
+
+static struct dvb_frontend_ops zl10353_ops = {
+
+ .info = {
+ .name = "Zarlink ZL10353 DVB-T",
+ .type = FE_OFDM,
+ .frequency_min = 174000000,
+ .frequency_max = 862000000,
+ .frequency_stepsize = 166667,
+ .frequency_tolerance = 0,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
+ FE_CAN_MUTE_TS
+ },
+
+ .release = zl10353_release,
+
+ .init = zl10353_init,
+ .sleep = zl10353_sleep,
+
+ .set_frontend = zl10353_set_parameters,
+ .get_tune_settings = zl10353_get_tune_settings,
+
+ .read_status = zl10353_read_status,
+ .read_snr = zl10353_read_snr,
+};
+
+module_param(debug_regs, int, 0644);
+MODULE_PARM_DESC(debug_regs, "Turn on/off frontend register dumps (default:off).");
+
+MODULE_DESCRIPTION("Zarlink ZL10353 DVB-T demodulator driver");
+MODULE_AUTHOR("Chris Pascoe");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(zl10353_attach);
+EXPORT_SYMBOL(zl10353_write);
diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h
new file mode 100644
index 000000000000..5cc4ae718d8c
--- /dev/null
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -0,0 +1,43 @@
+/*
+ * Driver for Zarlink DVB-T ZL10353 demodulator
+ *
+ * Copyright (C) 2006 Christopher Pascoe
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef ZL10353_H
+#define ZL10353_H
+
+#include
+
+struct zl10353_config
+{
+ /* demodulator's I2C address */
+ u8 demod_address;
+
+ /* function which configures the PLL buffer (for secondary I2C
+ * connected tuner) or tunes the PLL (for direct connected tuner) */
+ int (*pll_set)(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params, u8 *pllbuf);
+};
+
+extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
+ struct i2c_adapter *i2c);
+
+extern int zl10353_write(struct dvb_frontend *fe, u8 *ibuf, int ilen);
+
+#endif /* ZL10353_H */
diff --git a/drivers/media/dvb/frontends/zl10353_priv.h b/drivers/media/dvb/frontends/zl10353_priv.h
new file mode 100644
index 000000000000..b72224bd7dde
--- /dev/null
+++ b/drivers/media/dvb/frontends/zl10353_priv.h
@@ -0,0 +1,42 @@
+/*
+ * Driver for Zarlink DVB-T ZL10353 demodulator
+ *
+ * Copyright (C) 2006 Christopher Pascoe
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef _ZL10353_PRIV_
+#define _ZL10353_PRIV_
+
+#define ID_ZL10353 0x14
+
+enum zl10353_reg_addr {
+ INTERRUPT_0 = 0x00,
+ INTERRUPT_1 = 0x01,
+ INTERRUPT_2 = 0x02,
+ INTERRUPT_3 = 0x03,
+ INTERRUPT_4 = 0x04,
+ INTERRUPT_5 = 0x05,
+ STATUS_6 = 0x06,
+ STATUS_7 = 0x07,
+ STATUS_8 = 0x08,
+ STATUS_9 = 0x09,
+ SNR = 0x10,
+ CHIP_ID = 0x7F,
+};
+
+#endif /* _ZL10353_PRIV_ */
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 7c6ccb96b157..840efec32cb6 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -54,7 +54,6 @@
#include
#include
-#include
#include
@@ -67,6 +66,10 @@
#include "av7110_ca.h"
#include "av7110_ipack.h"
+#include "bsbe1.h"
+#include "lnbp21.h"
+#include "bsru6.h"
+
#define TS_WIDTH 376
#define TS_HEIGHT 512
#define TS_BUFLEN (TS_WIDTH*TS_HEIGHT)
@@ -82,6 +85,8 @@ static int hw_sections;
static int rgb_on;
static int volume = 255;
static int budgetpatch;
+static int wss_cfg_4_3 = 0x4008;
+static int wss_cfg_16_9 = 0x0007;
module_param_named(debug, av7110_debug, int, 0644);
MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)");
@@ -100,6 +105,10 @@ module_param(volume, int, 0444);
MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)");
module_param(budgetpatch, int, 0444);
MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0 (0 no, 1 autodetect, 2 always)");
+module_param(wss_cfg_4_3, int, 0444);
+MODULE_PARM_DESC(wss_cfg_4_3, "WSS 4:3 - default 0x4008 - bit 15: disable, 14: burst mode, 13..0: wss data");
+module_param(wss_cfg_16_9, int, 0444);
+MODULE_PARM_DESC(wss_cfg_16_9, "WSS 16:9 - default 0x0007 - bit 15: disable, 14: burst mode, 13..0: wss data");
static void restart_feeds(struct av7110 *av7110);
@@ -125,6 +134,13 @@ static void init_av7110_av(struct av7110 *av7110)
if (ret < 0)
printk("dvb-ttpci:cannot set internal volume to maximum:%d\n",ret);
+ ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 2, wss_cfg_4_3);
+ if (ret < 0)
+ printk("dvb-ttpci: unable to configure 4:3 wss\n");
+ ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 3, wss_cfg_16_9);
+ if (ret < 0)
+ printk("dvb-ttpci: unable to configure 16:9 wss\n");
+
ret = av7710_set_video_mode(av7110, vidmode);
if (ret < 0)
printk("dvb-ttpci:cannot set video mode:%d\n",ret);
@@ -242,10 +258,10 @@ static int arm_thread(void *data)
if (!av7110->arm_ready)
continue;
- if (down_interruptible(&av7110->dcomlock))
+ if (mutex_lock_interruptible(&av7110->dcomlock))
break;
newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
if (newloops == av7110->arm_loops || av7110->arm_errors > 3) {
printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n",
@@ -253,10 +269,10 @@ static int arm_thread(void *data)
recover_arm(av7110);
- if (down_interruptible(&av7110->dcomlock))
+ if (mutex_lock_interruptible(&av7110->dcomlock))
break;
newloops = rdebi(av7110, DEBINOSWAP, STATUS_LOOPS, 0, 2) - 1;
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
}
av7110->arm_loops = newloops;
av7110->arm_errors = 0;
@@ -741,7 +757,7 @@ int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
int ret = 0;
dprintk(4, "%p\n", av7110);
- if (down_interruptible(&av7110->pid_mutex))
+ if (mutex_lock_interruptible(&av7110->pid_mutex))
return -ERESTARTSYS;
if (!(vpid & 0x8000))
@@ -760,7 +776,7 @@ int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
ret = SetPIDs(av7110, vpid, apid, ttpid, subpid, pcrpid);
}
- up(&av7110->pid_mutex);
+ mutex_unlock(&av7110->pid_mutex);
return ret;
}
@@ -1088,11 +1104,9 @@ static int dvb_get_stc(struct dmx_demux *demux, unsigned int num,
struct av7110 *av7110;
/* pointer casting paranoia... */
- if (!demux)
- BUG();
+ BUG_ON(!demux);
dvbdemux = (struct dvb_demux *) demux->priv;
- if (!dvbdemux)
- BUG();
+ BUG_ON(!dvbdemux);
av7110 = (struct av7110 *) dvbdemux->priv;
dprintk(4, "%p\n", av7110);
@@ -1570,208 +1584,6 @@ static struct ves1x93_config alps_bsrv2_config = {
.pll_set = alps_bsrv2_pll_set,
};
-
-static u8 alps_bsru6_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x52,
- 0xff, 0xff
-};
-
-static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
-
- if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
- else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
- else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
- else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
- else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
- else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
- stv0299_writereg(fe, 0x13, aclk);
- stv0299_writereg(fe, 0x14, bclk);
- stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg(fe, 0x21, (ratio ) & 0xf0);
-
- return 0;
-}
-
-static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
- int ret;
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = 0xC4;
-
- if (params->frequency > 1530000) data[3] = 0xc0;
-
- ret = i2c_transfer(i2c, &msg, 1);
- if (ret != 1)
- return -EIO;
- return 0;
-}
-
-static struct stv0299_config alps_bsru6_config = {
-
- .demod_address = 0x68,
- .inittab = alps_bsru6_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsru6_pll_set,
-};
-
-
-static u8 alps_bsbe1_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x92,
- 0xff, 0xff
-};
-
-static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
- int ret;
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
-
- ret = i2c_transfer(i2c, &msg, 1);
- return (ret != 1) ? -EIO : 0;
-}
-
-static struct stv0299_config alps_bsbe1_config = {
- .demod_address = 0x68,
- .inittab = alps_bsbe1_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsbe1_pll_set,
-};
-
-static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
- struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
- int ret;
- u8 data[1];
- struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
-
- switch(voltage) {
- case SEC_VOLTAGE_OFF:
- data[0] = 0x00;
- break;
- case SEC_VOLTAGE_13:
- data[0] = 0x44;
- break;
- case SEC_VOLTAGE_18:
- data[0] = 0x4c;
- break;
- default:
- return -EINVAL;
- };
-
- ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
- return (ret != 1) ? -EIO : 0;
-}
-
-
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct av7110* av7110 = fe->dvb->priv;
@@ -2096,7 +1908,7 @@ static int av7110_fe_lock_fix(struct av7110* av7110, fe_status_t status)
if (av7110->playing)
return 0;
- if (down_interruptible(&av7110->pid_mutex))
+ if (mutex_lock_interruptible(&av7110->pid_mutex))
return -ERESTARTSYS;
if (synced) {
@@ -2118,7 +1930,7 @@ static int av7110_fe_lock_fix(struct av7110* av7110, fe_status_t status)
if (!ret)
av7110->fe_synced = synced;
- up(&av7110->pid_mutex);
+ mutex_unlock(&av7110->pid_mutex);
return ret;
}
@@ -2374,9 +2186,15 @@ static int frontend_init(struct av7110 *av7110)
/* ALPS BSBE1 */
av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap);
if (av7110->fe) {
- av7110->fe->ops->set_voltage = lnbp21_set_voltage;
- av7110->fe->ops->dishnetwork_send_legacy_command = NULL;
- av7110->recover = dvb_s_recover;
+ if (lnbp21_init(av7110->fe, &av7110->i2c_adap, 0, 0)) {
+ printk("dvb-ttpci: LNBP21 not found!\n");
+ if (av7110->fe->ops->release)
+ av7110->fe->ops->release(av7110->fe);
+ av7110->fe = NULL;
+ } else {
+ av7110->fe->ops->dishnetwork_send_legacy_command = NULL;
+ av7110->recover = dvb_s_recover;
+ }
}
break;
}
@@ -2714,16 +2532,16 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
tasklet_init (&av7110->debi_tasklet, debiirq, (unsigned long) av7110);
tasklet_init (&av7110->gpio_tasklet, gpioirq, (unsigned long) av7110);
- sema_init(&av7110->pid_mutex, 1);
+ mutex_init(&av7110->pid_mutex);
/* locks for data transfers from/to AV7110 */
spin_lock_init(&av7110->debilock);
- sema_init(&av7110->dcomlock, 1);
+ mutex_init(&av7110->dcomlock);
av7110->debitype = -1;
/* default OSD window */
av7110->osdwin = 1;
- sema_init(&av7110->osd_sema, 1);
+ mutex_init(&av7110->osd_mutex);
/* ARM "watchdog" */
init_waitqueue_head(&av7110->arm_wait);
diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h
index fafd25fab835..3e2e12124bae 100644
--- a/drivers/media/dvb/ttpci/av7110.h
+++ b/drivers/media/dvb/ttpci/av7110.h
@@ -16,6 +16,7 @@
#include
#include
#include
+#include
#include "dvbdev.h"
#include "demux.h"
@@ -127,7 +128,7 @@ struct av7110 {
/* DEBI and polled command interface */
spinlock_t debilock;
- struct semaphore dcomlock;
+ struct mutex dcomlock;
volatile int debitype;
volatile int debilen;
@@ -146,7 +147,7 @@ struct av7110 {
int osdwin; /* currently active window */
u16 osdbpp[8];
- struct semaphore osd_sema;
+ struct mutex osd_mutex;
/* CA */
@@ -172,7 +173,7 @@ struct av7110 {
struct tasklet_struct vpe_tasklet;
int fe_synced;
- struct semaphore pid_mutex;
+ struct mutex pid_mutex;
int video_blank;
struct video_status videostate;
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 0bb6e74ae7f0..75736f2fe838 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -327,10 +327,10 @@ int av7110_wait_msgstate(struct av7110 *av7110, u16 flags)
start = jiffies;
for (;;) {
err = time_after(jiffies, start + ARM_WAIT_FREE);
- if (down_interruptible(&av7110->dcomlock))
+ if (mutex_lock_interruptible(&av7110->dcomlock))
return -ERESTARTSYS;
stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
if ((stat & flags) == 0)
break;
if (err) {
@@ -487,11 +487,11 @@ static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length)
dprintk(1, "arm not ready.\n");
return -1;
}
- if (down_interruptible(&av7110->dcomlock))
+ if (mutex_lock_interruptible(&av7110->dcomlock))
return -ERESTARTSYS;
ret = __av7110_send_fw_cmd(av7110, buf, length);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
if (ret && ret!=-ERESTARTSYS)
printk(KERN_ERR "dvb-ttpci: %s(): av7110_send_fw_cmd error %d\n",
__FUNCTION__, ret);
@@ -563,11 +563,11 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
return -1;
}
- if (down_interruptible(&av7110->dcomlock))
+ if (mutex_lock_interruptible(&av7110->dcomlock))
return -ERESTARTSYS;
if ((err = __av7110_send_fw_cmd(av7110, request_buf, request_buf_len)) < 0) {
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
printk(KERN_ERR "dvb-ttpci: av7110_fw_request error %d\n", err);
return err;
}
@@ -579,7 +579,7 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
break;
if (err) {
printk(KERN_ERR "%s: timeout waiting for COMMAND to complete\n", __FUNCTION__);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return -ETIMEDOUT;
}
#ifdef _NOHANDSHAKE
@@ -595,7 +595,7 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
break;
if (err) {
printk(KERN_ERR "%s: timeout waiting for HANDSHAKE_REG\n", __FUNCTION__);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return -ETIMEDOUT;
}
msleep(1);
@@ -606,12 +606,12 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2);
if (stat & GPMQOver) {
printk(KERN_ERR "%s: GPMQOver\n", __FUNCTION__);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return -1;
}
else if (stat & OSDQOver) {
printk(KERN_ERR "%s: OSDQOver\n", __FUNCTION__);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return -1;
}
#endif
@@ -619,7 +619,7 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
for (i = 0; i < reply_buf_len; i++)
reply_buf[i] = rdebi(av7110, DEBINOSWAP, COM_BUFF + 2 * i, 0, 2);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return 0;
}
@@ -735,7 +735,7 @@ static int FlushText(struct av7110 *av7110)
unsigned long start;
int err;
- if (down_interruptible(&av7110->dcomlock))
+ if (mutex_lock_interruptible(&av7110->dcomlock))
return -ERESTARTSYS;
start = jiffies;
while (1) {
@@ -745,12 +745,12 @@ static int FlushText(struct av7110 *av7110)
if (err) {
printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for BUFF1_BASE == 0\n",
__FUNCTION__);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return -ETIMEDOUT;
}
msleep(1);
}
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return 0;
}
@@ -761,7 +761,7 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, u8* buf)
int length = strlen(buf) + 1;
u16 cbuf[5] = { (COMTYPE_OSD << 8) + DText, 3, win, x, y };
- if (down_interruptible(&av7110->dcomlock))
+ if (mutex_lock_interruptible(&av7110->dcomlock))
return -ERESTARTSYS;
start = jiffies;
@@ -772,7 +772,7 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, u8* buf)
if (ret) {
printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for BUFF1_BASE == 0\n",
__FUNCTION__);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return -ETIMEDOUT;
}
msleep(1);
@@ -786,7 +786,7 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, u8* buf)
if (ret) {
printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for HANDSHAKE_REG\n",
__FUNCTION__);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
return -ETIMEDOUT;
}
msleep(1);
@@ -798,7 +798,7 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, u8* buf)
if (length & 1)
wdebi(av7110, DEBINOSWAP, BUFF1_BASE + i * 2, 0, 2);
ret = __av7110_send_fw_cmd(av7110, cbuf, 5);
- up(&av7110->dcomlock);
+ mutex_unlock(&av7110->dcomlock);
if (ret && ret!=-ERESTARTSYS)
printk(KERN_ERR "dvb-ttpci: WriteText error %d\n", ret);
return ret;
@@ -1062,7 +1062,7 @@ int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc)
{
int ret;
- if (down_interruptible(&av7110->osd_sema))
+ if (mutex_lock_interruptible(&av7110->osd_mutex))
return -ERESTARTSYS;
switch (dc->cmd) {
@@ -1198,7 +1198,7 @@ int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc)
break;
}
- up(&av7110->osd_sema);
+ mutex_unlock(&av7110->osd_mutex);
if (ret==-ERESTARTSYS)
dprintk(1, "av7110_osd_cmd(%d) returns with -ERESTARTSYS\n",dc->cmd);
else if (ret)
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 94cf38c7e8a8..2f23ceab8d44 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -579,14 +579,11 @@ static ssize_t av7110_vbi_write(struct file *file, const char __user *data, size
return -EFAULT;
if ((d.id != 0 && d.id != V4L2_SLICED_WSS_625) || d.field != 0 || d.line != 23)
return -EINVAL;
- if (d.id) {
+ if (d.id)
av7110->wssData = ((d.data[1] << 8) & 0x3f00) | d.data[0];
- rc = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig,
- 2, 1, av7110->wssData);
- } else {
- av7110->wssData = 0;
- rc = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 1, 0);
- }
+ else
+ av7110->wssData = 0x8000;
+ rc = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetWSSConfig, 2, 1, av7110->wssData);
return (rc < 0) ? rc : count;
}
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 1465c04e49aa..9dd4745f5312 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1000,6 +1000,7 @@ static u8 read_pwm(struct budget_av *budget_av)
#define SUBID_DVBS_TV_STAR 0x0014
#define SUBID_DVBS_TV_STAR_CI 0x0016
+#define SUBID_DVBS_EASYWATCH 0x001e
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_CINERGY1200 0x1156
@@ -1038,6 +1039,7 @@ static void frontend_init(struct budget_av *budget_av)
case SUBID_DVBS_TV_STAR:
case SUBID_DVBS_TV_STAR_CI:
case SUBID_DVBS_CYNERGY1200N:
+ case SUBID_DVBS_EASYWATCH:
fe = stv0299_attach(&philips_sd1878_config,
&budget_av->budget.i2c_adap);
break;
@@ -1285,6 +1287,7 @@ MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
@@ -1300,6 +1303,7 @@ static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
+ MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index b9b3cd9c0369..5f91036f5b87 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -42,6 +42,9 @@
#include "stv0299.h"
#include "stv0297.h"
#include "tda1004x.h"
+#include "lnbp21.h"
+#include "bsbe1.h"
+#include "bsru6.h"
#define DEBIADDR_IR 0x1234
#define DEBIADDR_CICONTROL 0x0000
@@ -474,123 +477,6 @@ static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
}
-
-static u8 alps_bsru6_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x00,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x52,
- 0xff, 0xff
-};
-
-static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
-
- if (srate < 1500000) {
- aclk = 0xb7;
- bclk = 0x47;
- } else if (srate < 3000000) {
- aclk = 0xb7;
- bclk = 0x4b;
- } else if (srate < 7000000) {
- aclk = 0xb7;
- bclk = 0x4f;
- } else if (srate < 14000000) {
- aclk = 0xb7;
- bclk = 0x53;
- } else if (srate < 30000000) {
- aclk = 0xb6;
- bclk = 0x53;
- } else if (srate < 45000000) {
- aclk = 0xb4;
- bclk = 0x51;
- }
-
- stv0299_writereg(fe, 0x13, aclk);
- stv0299_writereg(fe, 0x14, bclk);
- stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
-
- return 0;
-}
-
-static int alps_bsru6_pll_set(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters *params)
-{
- u8 buf[4];
- u32 div;
- struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = div & 0xff;
- buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- buf[3] = 0xC4;
-
- if (params->frequency > 1530000)
- buf[3] = 0xc0;
-
- if (i2c_transfer(i2c, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-static struct stv0299_config alps_bsru6_config = {
-
- .demod_address = 0x68,
- .inittab = alps_bsru6_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsru6_pll_set,
-};
-
-
-
-
static u8 philips_su1278_tt_inittab[] = {
0x01, 0x0f,
0x02, 0x30,
@@ -1069,6 +955,20 @@ static void frontend_init(struct budget_ci *budget_ci)
break;
}
break;
+
+ case 0x1017: // TT S-1500 PCI
+ budget_ci->budget.dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ budget_ci->budget.dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
+ if (lnbp21_init(budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0)) {
+ printk("%s: No LNBP21 found!\n", __FUNCTION__);
+ if (budget_ci->budget.dvb_frontend->ops->release)
+ budget_ci->budget.dvb_frontend->ops->release(budget_ci->budget.dvb_frontend);
+ budget_ci->budget.dvb_frontend = NULL;
+ }
+ }
+
+ break;
}
if (budget_ci->budget.dvb_frontend == NULL) {
@@ -1146,6 +1046,7 @@ static int budget_ci_detach(struct saa7146_dev *dev)
static struct saa7146_extension budget_extension;
+MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
@@ -1157,6 +1058,7 @@ static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
+ MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
{
.vendor = 0,
}
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index fc416cf5253c..9fc9185a8426 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -37,6 +37,8 @@
#include "ves1x93.h"
#include "tda8083.h"
+#include "bsru6.h"
+
#define budget_patch budget
static struct saa7146_extension budget_extension;
@@ -290,103 +292,6 @@ static struct ves1x93_config alps_bsrv2_config = {
.pll_set = alps_bsrv2_pll_set,
};
-static u8 alps_bsru6_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x00,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x52,
- 0xff, 0xff
-};
-
-static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
-
- if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
- else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
- else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
- else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
- else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
- else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
- stv0299_writereg (fe, 0x13, aclk);
- stv0299_writereg (fe, 0x14, bclk);
- stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
-
- return 0;
-}
-
-static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = 0xC4;
-
- if (params->frequency > 1530000) data[3] = 0xc0;
-
- if (i2c_transfer(i2c, &msg, 1) != 1) return -EIO;
- return 0;
-}
-
-static struct stv0299_config alps_bsru6_config = {
-
- .demod_address = 0x68,
- .inittab = alps_bsru6_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsru6_pll_set,
-};
-
static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 238c77b52f89..c23c02d95641 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -41,6 +41,8 @@
#include "l64781.h"
#include "tda8083.h"
#include "s5h1420.h"
+#include "lnbp21.h"
+#include "bsru6.h"
static void Set22K (struct budget *budget, int state)
{
@@ -184,64 +186,6 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m
return 0;
}
-static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
- struct budget* budget = (struct budget*) fe->dvb->priv;
- u8 buf;
- struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- switch(voltage) {
- case SEC_VOLTAGE_13:
- buf = (buf & 0xf7) | 0x04;
- break;
-
- case SEC_VOLTAGE_18:
- buf = (buf & 0xf7) | 0x0c;
- break;
-
- case SEC_VOLTAGE_OFF:
- buf = buf & 0xf0;
- break;
- }
-
- msg.flags = 0;
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- return 0;
-}
-
-static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, long arg)
-{
- struct budget* budget = (struct budget*) fe->dvb->priv;
- u8 buf;
- struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- if (arg) {
- buf = buf | 0x10;
- } else {
- buf = buf & 0xef;
- }
-
- msg.flags = 0;
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- return 0;
-}
-
-static int lnbp21_init(struct budget* budget)
-{
- u8 buf = 0x00;
- struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
@@ -277,176 +221,6 @@ static struct ves1x93_config alps_bsrv2_config =
.pll_set = alps_bsrv2_pll_set,
};
-static u8 alps_bsru6_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x00,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x52,
- 0xff, 0xff
-};
-
-static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
-
- if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
- else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
- else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
- else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
- else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
- else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
- stv0299_writereg (fe, 0x13, aclk);
- stv0299_writereg (fe, 0x14, bclk);
- stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
-
- return 0;
-}
-
-static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = 0xC4;
-
- if (params->frequency > 1530000) data[3] = 0xc0;
-
- if (i2c_transfer(i2c, &msg, 1) != 1) return -EIO;
- return 0;
-}
-
-static struct stv0299_config alps_bsru6_config = {
-
- .demod_address = 0x68,
- .inittab = alps_bsru6_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsru6_pll_set,
-};
-
-static u8 alps_bsbe1_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x92, // 0x80 = inverse AGC
- 0xff, 0xff
-};
-
-static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
- int ret;
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
-
- ret = i2c_transfer(i2c, &msg, 1);
- return (ret != 1) ? -EIO : 0;
-}
-
-static struct stv0299_config alps_bsbe1_config = {
- .demod_address = 0x68,
- .inittab = alps_bsbe1_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsbe1_pll_set,
-};
-
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
@@ -580,20 +354,6 @@ static u8 read_pwm(struct budget* budget)
static void frontend_init(struct budget *budget)
{
switch(budget->dev->pci->subsystem_device) {
- case 0x1017:
- // try the ALPS BSBE1 now
- budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap);
- if (budget->dvb_frontend) {
- budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
- budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
- budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
- if (lnbp21_init(budget)) {
- printk("%s: No LNBP21 found!\n", __FUNCTION__);
- goto error_out;
- }
- }
-
- break;
case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
case 0x1013:
// try the ALPS BSRV2 first of all
@@ -646,9 +406,7 @@ static void frontend_init(struct budget *budget)
case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
- budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
- budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
- if (lnbp21_init(budget)) {
+ if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) {
printk("%s: No LNBP21 found!\n", __FUNCTION__);
goto error_out;
}
@@ -719,7 +477,6 @@ static int budget_detach (struct saa7146_dev* dev)
static struct saa7146_extension budget_extension;
-MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT);
MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
@@ -732,7 +489,6 @@ static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
- MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h
index c7bb63c4d98d..4ac0f4d08025 100644
--- a/drivers/media/dvb/ttpci/budget.h
+++ b/drivers/media/dvb/ttpci/budget.h
@@ -10,6 +10,8 @@
#include "dvb_net.h"
#include
+#include
+
#include
extern int budget_debug;
@@ -51,7 +53,7 @@ struct budget {
struct dmx_frontend mem_frontend;
int fe_synced;
- struct semaphore pid_mutex;
+ struct mutex pid_mutex;
int ci_present;
int video_port;
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 5a13c4744f61..248fdc7accfb 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -19,7 +19,7 @@
#include
#include
#include
-#include
+#include
#include "dvb_frontend.h"
#include "dmxdev.h"
@@ -35,7 +35,6 @@
#include
#include
-
/*
TTUSB_HWSECTIONS:
the DSP supports filtering in hardware, however, since the "muxstream"
@@ -83,8 +82,8 @@ struct ttusb {
struct dvb_net dvbnet;
/* and one for USB access. */
- struct semaphore semi2c;
- struct semaphore semusb;
+ struct mutex semi2c;
+ struct mutex semusb;
struct dvb_adapter adapter;
struct usb_device *dev;
@@ -150,7 +149,7 @@ static int ttusb_cmd(struct ttusb *ttusb,
printk("\n");
#endif
- if (down_interruptible(&ttusb->semusb) < 0)
+ if (mutex_lock_interruptible(&ttusb->semusb) < 0)
return -EAGAIN;
err = usb_bulk_msg(ttusb->dev, ttusb->bulk_out_pipe,
@@ -158,13 +157,13 @@ static int ttusb_cmd(struct ttusb *ttusb,
if (err != 0) {
dprintk("%s: usb_bulk_msg(send) failed, err == %i!\n",
__FUNCTION__, err);
- up(&ttusb->semusb);
+ mutex_unlock(&ttusb->semusb);
return err;
}
if (actual_len != len) {
dprintk("%s: only wrote %d of %d bytes\n", __FUNCTION__,
actual_len, len);
- up(&ttusb->semusb);
+ mutex_unlock(&ttusb->semusb);
return -1;
}
@@ -174,7 +173,7 @@ static int ttusb_cmd(struct ttusb *ttusb,
if (err != 0) {
printk("%s: failed, receive error %d\n", __FUNCTION__,
err);
- up(&ttusb->semusb);
+ mutex_unlock(&ttusb->semusb);
return err;
}
#if DEBUG >= 3
@@ -185,14 +184,14 @@ static int ttusb_cmd(struct ttusb *ttusb,
printk("\n");
#endif
if (!needresult)
- up(&ttusb->semusb);
+ mutex_unlock(&ttusb->semusb);
return 0;
}
static int ttusb_result(struct ttusb *ttusb, u8 * data, int len)
{
memcpy(data, ttusb->last_result, len);
- up(&ttusb->semusb);
+ mutex_unlock(&ttusb->semusb);
return 0;
}
@@ -250,7 +249,7 @@ static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num
int i = 0;
int inc;
- if (down_interruptible(&ttusb->semi2c) < 0)
+ if (mutex_lock_interruptible(&ttusb->semi2c) < 0)
return -EAGAIN;
while (i < num) {
@@ -284,7 +283,7 @@ static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num
i += inc;
}
- up(&ttusb->semi2c);
+ mutex_unlock(&ttusb->semi2c);
return i;
}
@@ -689,8 +688,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
memcpy(ttusb->muxpack + ttusb->muxpack_ptr,
data, avail);
ttusb->muxpack_ptr += avail;
- if (ttusb->muxpack_ptr > 264)
- BUG();
+ BUG_ON(ttusb->muxpack_ptr > 264);
data += avail;
len -= avail;
/* determine length */
@@ -1495,8 +1493,11 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
ttusb->dev = udev;
ttusb->c = 0;
ttusb->mux_state = 0;
- sema_init(&ttusb->semi2c, 0);
- sema_init(&ttusb->semusb, 1);
+ mutex_init(&ttusb->semi2c);
+
+ mutex_lock(&ttusb->semi2c);
+
+ mutex_init(&ttusb->semusb);
ttusb_setup_interfaces(ttusb);
@@ -1504,7 +1505,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
if (ttusb_init_controller(ttusb))
printk("ttusb_init_controller: error\n");
- up(&ttusb->semi2c);
+ mutex_unlock(&ttusb->semi2c);
dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
ttusb->adapter.priv = ttusb;
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index df831171e03c..44dea3211848 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -20,7 +20,8 @@
*
*/
-#include
+#include
+
#include
#include
#include
@@ -115,7 +116,7 @@ struct ttusb_dec {
unsigned int out_pipe;
unsigned int irq_pipe;
enum ttusb_dec_interface interface;
- struct semaphore usb_sem;
+ struct mutex usb_mutex;
void *irq_buffer;
struct urb *irq_urb;
@@ -124,7 +125,7 @@ struct ttusb_dec {
dma_addr_t iso_dma_handle;
struct urb *iso_urb[ISO_BUF_COUNT];
int iso_stream_count;
- struct semaphore iso_sem;
+ struct mutex iso_mutex;
u8 packet[MAX_PVA_LENGTH + 4];
enum ttusb_dec_packet_type packet_type;
@@ -273,9 +274,9 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command,
if (!b)
return -ENOMEM;
- if ((result = down_interruptible(&dec->usb_sem))) {
+ if ((result = mutex_lock_interruptible(&dec->usb_mutex))) {
kfree(b);
- printk("%s: Failed to down usb semaphore.\n", __FUNCTION__);
+ printk("%s: Failed to lock usb mutex.\n", __FUNCTION__);
return result;
}
@@ -300,7 +301,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command,
if (result) {
printk("%s: command bulk message failed: error %d\n",
__FUNCTION__, result);
- up(&dec->usb_sem);
+ mutex_unlock(&dec->usb_mutex);
kfree(b);
return result;
}
@@ -311,7 +312,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command,
if (result) {
printk("%s: result bulk message failed: error %d\n",
__FUNCTION__, result);
- up(&dec->usb_sem);
+ mutex_unlock(&dec->usb_mutex);
kfree(b);
return result;
} else {
@@ -327,7 +328,7 @@ static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command,
if (cmd_result && b[3] > 0)
memcpy(cmd_result, &b[4], b[3]);
- up(&dec->usb_sem);
+ mutex_unlock(&dec->usb_mutex);
kfree(b);
return 0;
@@ -835,7 +836,7 @@ static void ttusb_dec_stop_iso_xfer(struct ttusb_dec *dec)
dprintk("%s\n", __FUNCTION__);
- if (down_interruptible(&dec->iso_sem))
+ if (mutex_lock_interruptible(&dec->iso_mutex))
return;
dec->iso_stream_count--;
@@ -845,7 +846,7 @@ static void ttusb_dec_stop_iso_xfer(struct ttusb_dec *dec)
usb_kill_urb(dec->iso_urb[i]);
}
- up(&dec->iso_sem);
+ mutex_unlock(&dec->iso_mutex);
}
/* Setting the interface of the DEC tends to take down the USB communications
@@ -890,7 +891,7 @@ static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec)
dprintk("%s\n", __FUNCTION__);
- if (down_interruptible(&dec->iso_sem))
+ if (mutex_lock_interruptible(&dec->iso_mutex))
return -EAGAIN;
if (!dec->iso_stream_count) {
@@ -911,7 +912,7 @@ static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec)
i--;
}
- up(&dec->iso_sem);
+ mutex_unlock(&dec->iso_mutex);
return result;
}
}
@@ -919,7 +920,7 @@ static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec)
dec->iso_stream_count++;
- up(&dec->iso_sem);
+ mutex_unlock(&dec->iso_mutex);
return 0;
}
@@ -1229,8 +1230,8 @@ static int ttusb_dec_init_usb(struct ttusb_dec *dec)
{
dprintk("%s\n", __FUNCTION__);
- sema_init(&dec->usb_sem, 1);
- sema_init(&dec->iso_sem, 1);
+ mutex_init(&dec->usb_mutex);
+ mutex_init(&dec->iso_mutex);
dec->command_pipe = usb_sndbulkpipe(dec->udev, COMMAND_PIPE);
dec->result_pipe = usb_rcvbulkpipe(dec->udev, RESULT_PIPE);
diff --git a/drivers/media/radio/miropcm20-rds-core.c b/drivers/media/radio/miropcm20-rds-core.c
index a917a90cb5dc..b602c73e2309 100644
--- a/drivers/media/radio/miropcm20-rds-core.c
+++ b/drivers/media/radio/miropcm20-rds-core.c
@@ -18,14 +18,15 @@
#include
#include
#include
-#include
+#include
+
#include
#include "../../../sound/oss/aci.h"
#include "miropcm20-rds-core.h"
#define DEBUG 0
-static struct semaphore aci_rds_sem;
+static struct mutex aci_rds_mutex;
#define RDS_DATASHIFT 2 /* Bit 2 */
#define RDS_DATAMASK (1 << RDS_DATASHIFT)
@@ -181,7 +182,7 @@ int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize)
{
int ret;
- if (down_interruptible(&aci_rds_sem))
+ if (mutex_lock_interruptible(&aci_rds_mutex))
return -EINTR;
rds_write(cmd);
@@ -192,7 +193,7 @@ int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize)
else
ret = 0;
- up(&aci_rds_sem);
+ mutex_unlock(&aci_rds_mutex);
return ret;
}
@@ -200,7 +201,7 @@ EXPORT_SYMBOL(aci_rds_cmd);
int __init attach_aci_rds(void)
{
- init_MUTEX(&aci_rds_sem);
+ mutex_init(&aci_rds_mutex);
return 0;
}
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 914deab4e044..557fb5c4af38 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -43,7 +43,7 @@
static int io = CONFIG_RADIO_RTRACK_PORT;
static int radio_nr = -1;
-static struct semaphore lock;
+static struct mutex lock;
struct rt_device
{
@@ -83,23 +83,23 @@ static void rt_incvol(void)
static void rt_mute(struct rt_device *dev)
{
dev->muted = 1;
- down(&lock);
+ mutex_lock(&lock);
outb(0xd0, io); /* volume steady, off */
- up(&lock);
+ mutex_unlock(&lock);
}
static int rt_setvol(struct rt_device *dev, int vol)
{
int i;
- down(&lock);
+ mutex_lock(&lock);
if(vol == dev->curvol) { /* requested volume = current */
if (dev->muted) { /* user is unmuting the card */
dev->muted = 0;
outb (0xd8, io); /* enable card */
}
- up(&lock);
+ mutex_unlock(&lock);
return 0;
}
@@ -108,7 +108,7 @@ static int rt_setvol(struct rt_device *dev, int vol)
sleep_delay(2000000); /* make sure it's totally down */
outb(0xd0, io); /* volume steady, off */
dev->curvol = 0; /* track the volume state! */
- up(&lock);
+ mutex_unlock(&lock);
return 0;
}
@@ -121,7 +121,7 @@ static int rt_setvol(struct rt_device *dev, int vol)
rt_decvol();
dev->curvol = vol;
- up(&lock);
+ mutex_unlock(&lock);
return 0;
}
@@ -168,7 +168,7 @@ static int rt_setfreq(struct rt_device *dev, unsigned long freq)
freq += 171200; /* Add 10.7 MHz IF */
freq /= 800; /* Convert to 50 kHz units */
- down(&lock); /* Stop other ops interfering */
+ mutex_lock(&lock); /* Stop other ops interfering */
send_0_byte (io, dev); /* 0: LSB of frequency */
@@ -196,7 +196,7 @@ static int rt_setfreq(struct rt_device *dev, unsigned long freq)
else
outb (0xd8, io); /* volume steady + sigstr + on */
- up(&lock);
+ mutex_unlock(&lock);
return 0;
}
@@ -337,7 +337,7 @@ static int __init rtrack_init(void)
/* Set up the I/O locking */
- init_MUTEX(&lock);
+ mutex_init(&lock);
/* mute card - prevents noisy bootups */
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index 523be820f9c6..83bdae23417d 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -42,7 +42,7 @@
static int io = CONFIG_RADIO_AZTECH_PORT;
static int radio_nr = -1;
static int radio_wait_time = 1000;
-static struct semaphore lock;
+static struct mutex lock;
struct az_device
{
@@ -87,9 +87,9 @@ static void send_1_byte (struct az_device *dev)
static int az_setvol(struct az_device *dev, int vol)
{
- down(&lock);
+ mutex_lock(&lock);
outb (volconvert(vol), io);
- up(&lock);
+ mutex_unlock(&lock);
return 0;
}
@@ -122,7 +122,7 @@ static int az_setfreq(struct az_device *dev, unsigned long frequency)
frequency += 171200; /* Add 10.7 MHz IF */
frequency /= 800; /* Convert to 50 kHz units */
- down(&lock);
+ mutex_lock(&lock);
send_0_byte (dev); /* 0: LSB of frequency */
@@ -152,7 +152,7 @@ static int az_setfreq(struct az_device *dev, unsigned long frequency)
udelay (radio_wait_time);
outb_p(128+64+volconvert(dev->curvol), io);
- up(&lock);
+ mutex_unlock(&lock);
return 0;
}
@@ -283,7 +283,7 @@ static int __init aztech_init(void)
return -EBUSY;
}
- init_MUTEX(&lock);
+ mutex_init(&lock);
aztech_radio.priv=&aztech_unit;
if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index 36c9f5bf8cdd..39c1d9118636 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -23,10 +23,11 @@
#include
#include
#include
-#include
+#include
#include
#include
+
#define DRIVER_VERSION "0.05"
#define GPIO_DATA 0x60 /* port offset from ESS_IO_BASE */
@@ -104,7 +105,7 @@ struct radio_device {
muted, /* VIDEO_AUDIO_MUTE */
stereo, /* VIDEO_TUNER_STEREO_ON */
tuned; /* signal strength (0 or 0xffff) */
- struct semaphore lock;
+ struct mutex lock;
};
static u32 radio_bits_get(struct radio_device *dev)
@@ -258,9 +259,9 @@ static int radio_ioctl(struct inode *inode, struct file *file,
struct radio_device *card = video_get_drvdata(dev);
int ret;
- down(&card->lock);
+ mutex_lock(&card->lock);
ret = video_usercopy(inode, file, cmd, arg, radio_function);
- up(&card->lock);
+ mutex_unlock(&card->lock);
return ret;
}
@@ -311,7 +312,7 @@ static int __devinit maestro_probe(struct pci_dev *pdev,
}
radio_unit->io = pci_resource_start(pdev, 0) + GPIO_DATA;
- init_MUTEX(&radio_unit->lock);
+ mutex_init(&radio_unit->lock);
maestro_radio_inst = video_device_alloc();
if (maestro_radio_inst == NULL) {
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index c975ddd86cd5..f0bf47bcb64c 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -37,7 +37,8 @@
#include
#include
#include
-#include
+#include
+
#include
#include
@@ -101,7 +102,7 @@ static struct radio_device
unsigned long freq;
- struct semaphore lock;
+ struct mutex lock;
} radio_unit = {0, 0, 0, 0, };
@@ -267,9 +268,9 @@ static int radio_ioctl(struct inode *inode, struct file *file,
struct radio_device *card=dev->priv;
int ret;
- down(&card->lock);
+ mutex_lock(&card->lock);
ret = video_usercopy(inode, file, cmd, arg, radio_function);
- up(&card->lock);
+ mutex_unlock(&card->lock);
return ret;
}
@@ -290,7 +291,7 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d
goto err_out_free_region;
radio_unit.io = pci_resource_start(pdev, 0);
- init_MUTEX(&radio_unit.lock);
+ mutex_init(&radio_unit.lock);
maxiradio_radio.priv = &radio_unit;
if(video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) {
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 0229f792a059..53073b424107 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -24,7 +24,7 @@
#include
#include /* outb, outb_p */
#include /* copy to/from user */
-#include
+#include
struct fmi_device
{
@@ -37,7 +37,7 @@ struct fmi_device
static int io = -1;
static int radio_nr = -1;
static struct pnp_dev *dev = NULL;
-static struct semaphore lock;
+static struct mutex lock;
/* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */
/* It is only useful to give freq in intervall of 800 (=0.05Mhz),
@@ -68,16 +68,16 @@ static void outbits(int bits, unsigned int data, int port)
static inline void fmi_mute(int port)
{
- down(&lock);
+ mutex_lock(&lock);
outb(0x00, port);
- up(&lock);
+ mutex_unlock(&lock);
}
static inline void fmi_unmute(int port)
{
- down(&lock);
+ mutex_lock(&lock);
outb(0x08, port);
- up(&lock);
+ mutex_unlock(&lock);
}
static inline int fmi_setfreq(struct fmi_device *dev)
@@ -85,12 +85,12 @@ static inline int fmi_setfreq(struct fmi_device *dev)
int myport = dev->port;
unsigned long freq = dev->curfreq;
- down(&lock);
+ mutex_lock(&lock);
outbits(16, RSF16_ENCODE(freq), myport);
outbits(8, 0xC0, myport);
msleep(143); /* was schedule_timeout(HZ/7) */
- up(&lock);
+ mutex_unlock(&lock);
if (dev->curvol) fmi_unmute(myport);
return 0;
}
@@ -102,7 +102,7 @@ static inline int fmi_getsigstr(struct fmi_device *dev)
int myport = dev->port;
- down(&lock);
+ mutex_lock(&lock);
val = dev->curvol ? 0x08 : 0x00; /* unmute/mute */
outb(val, myport);
outb(val | 0x10, myport);
@@ -110,7 +110,7 @@ static inline int fmi_getsigstr(struct fmi_device *dev)
res = (int)inb(myport+1);
outb(val, myport);
- up(&lock);
+ mutex_unlock(&lock);
return (res & 2) ? 0 : 0xFFFF;
}
@@ -296,7 +296,7 @@ static int __init fmi_init(void)
fmi_unit.flags = VIDEO_TUNER_LOW;
fmi_radio.priv = &fmi_unit;
- init_MUTEX(&lock);
+ mutex_init(&lock);
if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) {
release_region(io, 2);
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 099ffb3b9c71..bcebd8cb19ad 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -19,9 +19,9 @@
#include /* outb, outb_p */
#include /* copy to/from user */
#include /* kernel radio structs */
-#include
+#include