mmc: tmio: fix access width of Block Count Register

In R-Car Gen2 or later, the maximum number of transfer blocks are
changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register
should use iowrite32().

If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this
value will not be cleared. So, SD/MMC card initialization fails.

So, check for the bigger register and use apropriate write. Also, mark
the register as extended on Gen2.

Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: use max_blk_count in if(), add Gen2, update commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@kernel.org
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[Ulf: Fixed build error]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Takeshi Saito 2019-02-21 20:38:05 +01:00 committed by Ulf Hansson
parent 5c27ff5db1
commit 5603731a15
3 changed files with 11 additions and 1 deletions

View File

@ -65,6 +65,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = {
.scc_offset = 0x0300,
.taps = rcar_gen2_scc_taps,
.taps_num = ARRAY_SIZE(rcar_gen2_scc_taps),
.max_blk_count = 0xffffffff,
};
/* Definitions for sampling clocks */

View File

@ -277,6 +277,11 @@ static inline void sd_ctrl_write32_as_16_and_16(struct tmio_mmc_host *host,
iowrite16(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
{
iowrite32(val, host->ctl + (addr << host->bus_shift));
}
static inline void sd_ctrl_write32_rep(struct tmio_mmc_host *host, int addr,
const u32 *buf, int count)
{

View File

@ -43,6 +43,7 @@
#include <linux/regulator/consumer.h>
#include <linux/mmc/sdio.h>
#include <linux/scatterlist.h>
#include <linux/sizes.h>
#include <linux/spinlock.h>
#include <linux/swiotlb.h>
#include <linux/workqueue.h>
@ -703,6 +704,9 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
/* Set transfer length / blocksize */
sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
if (host->mmc->max_blk_count >= SZ_64K)
sd_ctrl_write32(host, CTL_XFER_BLK_COUNT, data->blocks);
else
sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
tmio_mmc_start_dma(host, data);