regulator: Fixes for v5.3

This is obviouly very late, containing three small and simple
 driver specific fixes.  The main one is the TWL fix, this fixes
 issues with cpufreq on the PMICs used with BeagleBoard generation
 OMAP SoCs which had been broken due to changes in the generic OPP
 code exposing a bug in the regulator driver for these devices
 causing them to think that OPPs weren't supported on the system.
 
 Sorry about sending this so late, I hadn't registered that the
 TWL issue manifested in cpufreq.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl12XUwTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0P0KB/0QkoUb2NjJb+vHhUM4O8IYAq3tyYOh
 gXRbgYEILevB3Vt6PdrvHf0vRgI+yURFc/5uDlYHHoHd4NDj1nYKB8Wt2c8xn9dW
 08eCotje7PnqLOHTK2OlI9hzuoc+tETrA55ZwgPLQDbQH6MQh3OKLagBL0BPxq4M
 vv0twfIH/8YzCzXIg52xIVp/y0Whb81yEr7PXiaNBqDQphjPi32z435Ru9YBX/lq
 PD6hFu5tGoXw6X96e2zQmGD70Jj+Cq0OF7SA5nm/rkGho777Kmn8y+msRbdB7BFp
 lqEF4jgRgHitbwPzehKZcbDFq5xROQCqIAbtFPYdOhqhRQglPkk8Woch
 =czSl
 -----END PGP SIGNATURE-----

Merge tag 'regulator-fix-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "This is obviouly very late, containing three small and simple driver
  specific fixes.

  The main one is the TWL fix, this fixes issues with cpufreq on the
  PMICs used with BeagleBoard generation OMAP SoCs which had been broken
  due to changes in the generic OPP code exposing a bug in the regulator
  driver for these devices causing them to think that OPPs weren't
  supported on the system.

  Sorry about sending this so late, I hadn't registered that the TWL
  issue manifested in cpufreq"

* tag 'regulator-fix-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl: voltage lists for vdd1/2 on twl4030
  regulator: act8945a-regulator: fix ldo register addresses in set_mode hook
  regulator: slg51000: Fix a couple NULL vs IS_ERR() checks
This commit is contained in:
Linus Torvalds 2019-09-09 10:58:57 -07:00
commit 56037cadf6
3 changed files with 26 additions and 9 deletions

View File

@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
reg = ACT8945A_DCDC3_CTRL;
break;
case ACT8945A_ID_LDO1:
reg = ACT8945A_LDO1_SUS;
reg = ACT8945A_LDO1_CTRL;
break;
case ACT8945A_ID_LDO2:
reg = ACT8945A_LDO2_SUS;
reg = ACT8945A_LDO2_CTRL;
break;
case ACT8945A_ID_LDO3:
reg = ACT8945A_LDO3_SUS;
reg = ACT8945A_LDO3_CTRL;
break;
case ACT8945A_ID_LDO4:
reg = ACT8945A_LDO4_SUS;
reg = ACT8945A_LDO4_CTRL;
break;
default:
return -EINVAL;

View File

@ -205,7 +205,7 @@ static int slg51000_of_parse_cb(struct device_node *np,
ena_gpiod = devm_gpiod_get_from_of_node(chip->dev, np,
"enable-gpios", 0,
gflags, "gpio-en-ldo");
if (ena_gpiod) {
if (!IS_ERR(ena_gpiod)) {
config->ena_gpiod = ena_gpiod;
devm_gpiod_unhinge(chip->dev, config->ena_gpiod);
}
@ -459,7 +459,7 @@ static int slg51000_i2c_probe(struct i2c_client *client,
GPIOD_OUT_HIGH
| GPIOD_FLAGS_BIT_NONEXCLUSIVE,
"slg51000-cs");
if (cs_gpiod) {
if (!IS_ERR(cs_gpiod)) {
dev_info(dev, "Found chip selector property\n");
chip->cs_gpiod = cs_gpiod;
}

View File

@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
2500, 2750,
};
/* 600mV to 1450mV in 12.5 mV steps */
static const struct regulator_linear_range VDD1_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
};
/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
static const struct regulator_linear_range VDD2_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
};
static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
}
static const struct regulator_ops twl4030smps_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.set_voltage = twl4030smps_set_voltage,
.get_voltage = twl4030smps_get_voltage,
};
@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
}, \
}
#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
n_volt) \
static const struct twlreg_info TWL4030_INFO_##label = { \
.base = offset, \
.id = num, \
@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
.of_map_mode = twl4030reg_map_mode, \
.n_voltages = n_volt, \
.n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
.linear_ranges = label ## _ranges, \
}, \
}
@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
/* VUSBCP is managed *only* by the USB subchip */
TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);