diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index 3346c1e2a7a0..fe31b1510717 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -187,6 +187,62 @@ And on the A23, A31, A31s and A33, you need one more clock line:
    - 'lvds-alt': An alternative clock source, separate from the TCON channel 0
                  clock, that can be used to drive the LVDS clock
 
+TCON TOP
+--------
+
+TCON TOPs main purpose is to configure whole display pipeline. It determines
+relationships between mixers and TCONs, selects source TCON for HDMI, muxes
+LCD and TV encoder GPIO output, selects TV encoder clock source and contains
+additional TV TCON and DSI gates.
+
+It allows display pipeline to be configured in very different ways:
+
+                                / LCD0/LVDS0
+                 / [0] TCON-LCD0
+                 |              \ MIPI DSI
+ mixer0          |
+        \        / [1] TCON-LCD1 - LCD1/LVDS1
+         TCON-TOP
+        /        \ [2] TCON-TV0 [0] - TVE0/RGB
+ mixer1          |                  \
+                 |                   TCON-TOP - HDMI
+                 |                  /
+                 \ [3] TCON-TV1 [1] - TVE1/RGB
+
+Note that both TCON TOP references same physical unit. Both mixers can be
+connected to any TCON.
+
+Required properties:
+  - compatible: value must be one of:
+    * allwinner,sun8i-r40-tcon-top
+  - reg: base address and size of the memory-mapped region.
+  - clocks: phandle to the clocks feeding the TCON TOP
+    * bus: TCON TOP interface clock
+    * tcon-tv0: TCON TV0 clock
+    * tve0: TVE0 clock
+    * tcon-tv1: TCON TV1 clock
+    * tve1: TVE0 clock
+    * dsi: MIPI DSI clock
+  - clock-names: clock name mentioned above
+  - resets: phandle to the reset line driving the TCON TOP
+  - #clock-cells : must contain 1
+  - clock-output-names: Names of clocks created for TCON TV0 channel clock,
+    TCON TV1 channel clock and DSI channel clock, in that order.
+
+- ports: A ports node with endpoint definitions as defined in
+    Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should
+    be defined:
+    * port 0 is input for mixer0 mux
+    * port 1 is output for mixer0 mux
+    * port 2 is input for mixer1 mux
+    * port 3 is output for mixer1 mux
+    * port 4 is input for HDMI mux
+    * port 5 is output for HDMI mux
+    All output endpoints for mixer muxes and input endpoints for HDMI mux should
+    have reg property with the id of the target TCON, as shown in above graph
+    (0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one
+    endpoint connected to remote endpoint.
+
 DRC
 ---
 
diff --git a/include/dt-bindings/clock/sun8i-tcon-top.h b/include/dt-bindings/clock/sun8i-tcon-top.h
new file mode 100644
index 000000000000..25164d767835
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-tcon-top.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/* Copyright (C) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_
+#define _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_
+
+#define CLK_TCON_TOP_TV0	0
+#define CLK_TCON_TOP_TV1	1
+#define CLK_TCON_TOP_DSI	2
+
+#endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */